INDEX 1 []

3

INDEX

Powder Actuated Fastening Systems . . . . . . . . . . . . . . . . . . 5 - 11For fixing to concrete and steel.

1Mechanical, Chemical and Cast In Anchors . . . . . . . . . . . 12 - 29Concrete and masonry anchoring systems.

2Power Tools and Accessories . . . . . . . . . . . . . . . . . . . . . . . 31 - 39Concrete drilling systems, power tools and accessories.

3Construction Chemicals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 - 464Metal and Timber Fastening . . . . . . . . . . . . . . . . . . . . . . . . . 47 - 63Self drilling screws.

5Plasterboard and Cavity Fasteners . . . . . . . . . . . . . . . . . . . 65 - 67Fixings for plasterboard and cavity walls.

6Product Code Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 - 72

BURWOOD Ph: (03)9808 7733MORWELL Ph: (03)5133 7765; BENDIGO Ph: (03)5442 9622

4

1

QUALITY POLICY STATEMENTRamset Fasteners (Aust.) Pty. Limited develops, manufactures and markets tools, hardware and fastening systems to the construction and hardware industries internationally.

Our objective is the elimination of all wasteful work practices, thereby enabling us to provide our CUSTOMERS with products and services yielding total satisfaction.

The company embraces the philosophy of total quality management supported by a common, internationally accredited, quality management system based on the ISO 9000 series of international standards.

In order to achieve our objective, we are continuously:

1. Improving the quality of our products and services.2. Improving the efficiency of our activities.3. Improving the safety of our work and workplace.4. Developing mutual trust and teamwork.5. Developing people to achieve their full potential through leadership, education and training.6. Encouraging pride in our work and workplace.

A look behind the Ramset™ nameRamset is a certified supplier to the ISO9001 internationally recognised quality management systems.

This is recognition of the Ramset total focus, by management and staff alike, to exceed customer expectations in everything we do.

The Ramset objective is to provide skilled and comprehensive help at all times to ensure you, the customer, has the right product for the job at the most appropriate quality, and price, which in turn enables you to complete the job quickly and efficiently.

Simply we aim to have the product, quality service and customer responsiveness that you deserve.

ProductRamset offer a comprehensive range of quality construction fasteners, designed to utilise alternative solutions. The very latest technology, allowing the user the widest choice of fixing for any application. All products are fully tested to provide safety and confidence, and this is supported by detailed technical information.

At Ramset we believe working with the correct product is the secret to every successful fastening application.

Warranties - New Tools~ All new Powder Actuated Fastening tools have a 5 year warranty.~ All new Electrical Equipment is warranted free from defects for a

period of 12 months.~ Serviced Equipment: any piece of good equipment will need to be

serviced regularly, particularly where reliability and top performance is essential. Service repair work will be undertaken to the highest standards by our skilled technicians. A 30 day warranty covering

parts and labour (relating to service) accompanies every tool serviced.

Note: All Ramset product is warranted first for the purpose for which it has been designed.


5

11Indirect Acting Tools

Twist Lok™ Tools

STRIKER Strip Feed Tool with magazine 6TS60P Strip Feed Tool 6TS750P Strip Feed Tool 6TM40 Collated Fastener Magazine 6

Formwork Tool

FormMaster™ Formwork Tool 6

Single Shot Tool

JobMaster™ Tool 6

Disc Feed Tool

D230 Decking Tool 6

Fasteners & Assemblies forIndirect Acting Tools

Ramset Drive Pins 7Form Pins 7Threaded Studs 7Assemblies 8Drive Pins for other tools 8

Powerloads for Indirect Acting Tools

Strip Powerloads .27 calibre 9Disc Powerloads .25 calibre 9Short Necked Powerloads .22 calibre 9Short Series Powerloads .22 calibre 9

Direct Acting Tools

J20S Tool 10HD200 Marine Tool 10

Fasteners for Direct Acting Tools

Drive Pins 10

Powerloads for Direct Acting Tools

.22 calibre 10

Powder Actuated Accessories

Couplings 11Clips 11Discs 11Accessories & Maintenance Kits 11

Powder Actuated Fastening Systems


6

1

TWIST LOK™ TOOLSPowder Actuated Fastening Systems

FORMWORK TOOL

STRIKER40 mm CAPACITY MAGAZINE~ Power adjustment.~ 9 mm barrel.~ Medium to heavy duty.~ 10 power load strip system.

TS60P60 mm CAPACITY~ Power adjustment.~ 9 mm barrel.~ Medium to heavy duty.~ TM40 magazine compatible.~ 10 power load strip system.

TS750P85 mm CAPACITY~ Power adjustment.~ 9 mm barrel.~ Medium to heavy duty.~ TM40 magazine compatible.~ 10 power load strip system.

TM40COLLATED FASTENER MAGAZINE~ Suitable for use with TS60P and

TS750P.~ 10 pin collated strip.~ 40 mm capacity.~ Complete with piston.~ Easy to fit Twist-Lok® connection.

JobMaster™TOOL~ 75 mm capacity.~ 9 mm barrel.~ Medium to heavy duty.

D230DECKING TOOL~ 14 mm barrel.~ Heavy duty fixing decking to steel.~ Disc feed power loads.~ Fastener arrest system - fastener

will not penetrate sheet if steel is missed.

SINGLE SHOT TOOL DISC FEED TOOL

FormMaster™FORMWORK TOOL~ 100 mm capacity.~ Power adjustment.~ 9 mm barrel.~ Medium to heavy duty.~ 10 power load strip system.~ Semi automatic operation.



7

1

FASTENERS & ASSEMBLIES FOR INDIRECT ACTING TOOLSNote: For all drive pins and threaded studs, fixture thickness (t) in mm

is shown as the recommended range into specific materials. Use outside these recommendations may result in pin or fixing failure. Please consult Ramset Technical Advice for specificneeds outside these recommendations.

RAMSET DRIVE PINSFOR USE WITH STRIKER & TM40~ Pack quantity: 200 (◆ LDM40 Qty: 100)~ Head diameter hd: 9 mm~ Collated to suit Ramset Magazine (TM40).

Fixt. Thick. to 8mm Steel t 2* 4* 2 6 9 14 24 Fixt. Thick. to Concrete t N/A N/A N/A 1 2 6 16 Shank Length L 14 16 18 22 25 30 40 Order No. LDM14K* LDM16K* LDM18K LDM22 LDM25 LDM30 LDM40 ◆

* This pin is for fixing to solid steel.

FOR USE WITH TS60P, TS750P & JobMaster™~ Pack quantity: 100~ Head diameter hd: 8 mm~ Preassembled with tips.~ Pins up to 57mm suitable for use with TS60P &D60 tools.~ Pins up to 90mm suitable for use with TS750P, D200, D90 & TS750 tools.~ All drive pins are suitable for FormMaster tool.~ Drive pins up to 42 mm can also be used with E45 tool.~ Pins up to 75mm suitable for JobMaster tool.

Fixt. Thick. to Steel t 2* 4* 2 6 9 16 22 26 34 41 49 59 74 84 Fixt. Thick. to Concrete t N/A N/A N/A 1 2 8 14 18 26 33 41 51 66 76L Shank Length 14 16 18 22 25 32 38 42 50 57 65 75 90 100

Order No. LDU14E*LDU16E*LDU18E LDU22 LDU25 LDU32 LDU38 LDU42 LDU50 LDU57 LDU65 LDU75 LDU90 LDU99


FORM PINSFOR USE WITH FormMaster™ & TS750P ~ Pack quantity: 250~ Head diameter hd: 5mm~ For temporary fixing of timber formwork.~ Break off feature for clean removal.~ Small head for easy stripping.

Fixt. Thick. to Steel t N/A N/A N/A Timber Thick. to Conc. t 35 50 75L Shank Length 60 75 99

Order No. LDU60F LDU75F LDU99F

THREADED STUDS~ Pack quantity: 100~ Preassembled with tips.~ For use into steel and concrete.~ All threaded studs can also be used in all Ramset indirect acting tools.~ Medium to heavy duty.~ See page 9 for couplers, nuts and washers.

Fixing to Steel ✓ ✓

Fixing to Concrete ✓ ✓

Fixt. Thick. to Steel t 0 0 20 25 Fixt. Thick. to Concrete t N/A N/A 0 5L Shank Length 12 18 25 30db Thread Size M6 M6 M6 M6Lt Thread Length 9 20 20 16

Order No. LSU12M609E* LPU18M620K LTU25M620 LTU30M616


Pin Breaking Tool PBT


8

1

ASSEMBLIESASSEMBLIES FOR USE WITH ALL RAMSET™ INDIRECT ACTING TOOLS~ Pack quantity: 100~ hd Head diameter: 8 mm~ dh Clip hole diameter: 7 mm~ Washer assemblies for fixing soft materials.~ Clip assemblies for suspension connections.

Fixt Thick. to Concrete t 2 2 8 8 51 Shank Length L 25 25 32 32 75 Order No. LWU25 LAU25 LWU32 LAU32 LWU75

INSULATION FASTENER FOR USE WITH TS750P~ Requires use of insulation fixing kit, Order No. PA27624.~ Pack quantity: 500~ For fixing insulation board to concrete.~ Large retention washer for secure fixing.

Insulation Thickness 50 75 Order No. LF8050 LF8075

HEAVY DUTY DRIVE PIN ASSEMBLY FOR D230~ For fixing decking steel (up to 3 mm) to structural steel.~ Secure rapid installation.~ Pack quantity: 100~ Head diameter hd: 14 mm

Fixing to Steel ✓ Shank Length L 22 Order No. LHS22

DRIVE PINS FOR OTHER TOOLSFOR USE WITH DX350, DX36, DXA40 & DXA41~ Pack quantity: 100~ Head diameter hd: 8.4

Fixt. Thick. to Steel t 4 3 6 11 16 21 26 31 36 41 46 56 Fixt. Thick. to Concrete t N/A N/A 1 4 8 13 18 23 28 33 38 48 Shank Length L 16 19 22 27 32 37 42 47 52 57 62 72 Order No. RHP16K RHP19K RHP22 RHP27 RHP32 RHP37 RHP42 RHP47 RHP52 RHP57 RHP62 RHP72

FOR USE WITH DX36M, DXA40 & DXA41~ Collated for magazine use.

Fixt. Thick. to Steel t 4 6 11 16 21 26 31 36 41 46 56 Shank Length L 16 22 27 32 37 42 47 52 57 62 72 Order No. RHC16K RHC22 RHC27 RHC32 RHC37 RHC42 RHC47 RHC52 RHC57 RHC62 RHC72




9

1

POWERLOADS FOR INDIRECT ACTING TOOLSSTRIP POWERLOADS .27 calibreFOR USE WITH STRIKER, TS60P, TS750P & FormMaster™ tools~ 10 load strip.~ Pack quantity: 100~ These power loads can also be used in Ramset TS750 & S75A tools.~ Also suits DX330, DX36, DXA40 & A41.

Strength Weak Medium Strong Colour Green Yellow Red Order No. PLSGR22 PLSYW22 PLSRD22

SHORT SERIES POWERLOADS .22 calibreFOR USE WITH JobMaster™~ Pack quantity: 100

Strength Weak Medium Strong Colour Green Yellow Red Order No. PLCGR22S PLCYW22S PLCRD22S

DISC POWERLOADS .25 calibreFOR USE WITH D230, D200, D90, D60~ 10 load disc.~ Pack quantity: 100

Strength Minimum Weak Medium Strong Very Strong Colour Brown Green Yellow Red Order No. D200, D90, D60 PLDBR25 PLDGR25 PLDYW25 PLDRD25L Order No. D230 – – PLDYW25X PLDBU25X (Blue) PLDRD25X (Red)

SHORT NECKED POWERLOADS .22 calibreFOR USE WITH E45, JP50, JP88, J10~ Pack quantity: 100

Strength Weak Medium Strong Very Strong Especially Strong Colour Green Yellow Red Purple White Order No. PLCGR22N PLCYW22N PLCRD22N PLCPU22N PLCWH22N



10

1

FASTENERS FOR DIRECT ACTING TOOLSDRIVE PINS~ For fixing into steel and concrete.~ Medium to heavy duty.~ Tips assembled.

FOR USE WITH J20S~ Pack quantity: 100~ hd Head diameter: 6.3 mm~ Also suitable for J10 & J20 with 1/4” barrel.

Fixt. Thick. to 8mm Steel t 25 38 50 60 Fixt. Thick. to Concrete t 13 25 38 50 Shank Length l 38 50 64 75 Order No. HDB38 HDB50 HDB64 HDB75

POWERLOADS FOR DIRECT ACTING TOOLS.22 CALIBREFOR USE WITH J20S~ Pack quantity: 100~ These powerloads can also be used in the Ramset J20 tool.

Strength Weak Medium Strong Very Strong Especially Strong (L) Maximum (L) Colour Green Yellow Red Purple White Black Order No. PLCGR22 PLCYW22 PLCRD22 PLCPU22 PLCWH22L PLCBL22L

DIRECT ACTING TOOLS

J20SDIRECT TOOL~ Medium to heavy duty.~ 100mm capacity.~ 1/4” barrel.

HD200MARINE TOOL~ Underwater operation.~ Heavy duty.~ 100mm capacity.~ Single shot 3/8” expendable barrel.~ Pin range and powerloads available

on application.



Couplings Conduit Clips

Discs Angle Clips

Tie Wire Couplings

11

1

POWDER ACTUATED ACCESSORIES

COUPLINGS

db Thread AF Across Flat/ d Diameter dh Coupling Style Order No. Pack Size x Hole ø Quantity

L Coupling Length

1/4” U.N.C. 10 x 22 – Hex RTCU04 100M6 10 x 18 – Hex RTCM06 100M6 8 x 44 6.5 Tie Wire REM06 1003/8” 12 x 52 6.5 Tie Wire REW06 50

CLIPS

d Clip W Clip Width dh Clip Hole Style Order No. Pack Diameter x Diameter Quantity Height L Clip Length

10 42 x 18.8 7 3/8” Conduit RCC10C 100 12 44.2 x 18.8 7 1/2” Conduit RCC12C 100 16 47.2 x 18.8 7 5/8” Conduit RCC16C 100 20 51.2 x 18.8 7 3/4” Conduit RCC20C 100 25 57 x 18.8 7 1” Conduit RCC25C 50 25 19 x 25 7 Angle (Ramclip) RCA25F 100 38 16 x 25 7 Angle (Ramclip) RCA38C 100

DISCS

d Disc dh Disc Hole W Disc Thickness Order No. Pack Diameter Diameter Quantity

1/2” 4.0 1.6 RCD12C 500 5/8” 4.5 1.6 RCD16F 100 7/8” 4.5 2.0 RCD22F 100

ACCESSORIES AND MAINTENANCE KIT

Description Order No. Pack Quantity

Safety Warning Sign PAW58 1 Safety Goggles PA1613 1 Plastic Tool Box PA9289 1 Tool Cleaning Kit Strip Feed Tools PA9333 1


12

2

2Spatec™ Safety Anchors

Spatec Safety Anchors 14

Boa™ Coil Anchor

Boa Coil Anchors 14

Trubolt™ Stud Anchors

Trubolt Stud Anchors 15Trufast Push-Pull Anchor 15

Dynabolt™ Anchors

Dynabolt Anchors 16Dynabolt Hex Bolt Anchors 16Dynabolt Post Head Anchors 17Dynabolt Specials 17Dynabolt Post Screws 17

Loxin™ Shield Anchors

Loxin Shield Anchors 18

Dynaset™ Drop-in Anchors

Dynaset Drop-in Anchors 18

Dynaset™ Safety Ring Anchor

Dynaset Safety Ring Anchor 18

Allthread Rod

Allthread Rod 19

Couplings, Nuts & Washers

Couplings, Nuts & Washers 19

Ramset Chemset™ Capsules

Chemset Hammer Capsules 20Chemset Maxima™ Spin Capsules 20

Chemset™ Anchor Studs

Chemset Anchor Studs 20

Ramset Chemset™ Injection Mortar

Chemset Injection 100 Series 21Chemset Injection 800 Series 21Chemset Injection Rod 21

Ramset Chemset™ Injection Kit

Chemset Mortar Tool Kit 22

Chemset™ Systems Applicator

Chemset Universal Applicator 22

Chemical Anchoring System Anchors

Remedial Wall Ties 22Hollow Concrete Block Sleeves & Sieves 22

Chemset™ Anchoring System Accessories

Hole Cleaning Accessories 23Retaining Collars 23

Ankascrew™

Ankascrew 24

Shuredrive Anchors

Shuredrive Anchors 24

Easydrive Anchors

Easydrive Anchors 25

Nylon Anchors

Nylon Anchors 25

Brickplugs

Brickplugs 26

Ramplugs

Standard Plugs 26Long Plugs 26Ultra Long Plugs 26

Concrete Nails

Concrete Nails 27Concrete Nail Holder 27

Plastic Spaghetti

Plastic Spaghetti 27

Star Plug Plastic Plugs

Star Plug Plastic Plugs 28

Ankamate

Ankamate 28

Mechanical, Chemical and Cast In Anchors


13

2

Elephants’ Feet Anchors

Elephants’ Feet Anchors 29

Ferrule Concrete Inserts

Ferrule Concrete Inserts 29

Concrete Inserts

Concrete Inserts 29

Insert anchor into hole flush against fixture.

NOTE:The performance figures presented for anchors in this section are calculated using working load limit principles for a specific concrete strength of 32 Mpa (unless otherwise stated) and assuming either a straight tension load or a straight shear load away from the concrete edge, is applied.

It is also important to note -(i) that the anchors must be installed a

minimum of 4 x the hole depth for mechanical anchors and 1 x the hole depth for chemical anchors, away from the nearest concrete edge.

(ii) that the anchors must be spaced a minimum of 4 x the hole depth for mechanical anchors and 1.5 x hole depth for chemical anchors, apart from each other.

(iii) the thickness of the concrete structure being fixed to, is a minimum of 2 x the hole depth.

Conditions outside these situations may affect the performance of the anchors significantly.

Ramset anchors can be used for a wide range of applications and substrate materials outside these parameters, however, we recommend an appropriately qualified engineer or the Ramset Technical Advisory Service be consulted to ensure the appropriate anchor is selected for specific applications outside the above parameters.

2. Anchor InstallationEXPANSION ANCHORS CHEMICAL ANCHORS DROP IN ANCHORS

3. Securing the Fixture

1. Typical Hole Preparation

Drill hole using correctly sized rotary hammer drill bit to the specified depth in solid substrate.

Clean hole with correctly sized hole cleaning brush with stiff nylon or wire bristles. Using a combination push/pull and twisting (rotation) motion, ensure the sides of the hole are scrubbed at least 3 times for full depth of hole.

Remove debris, dust etc. from the hole using a hole cleaning blower with at least 4 swift pumps. Alternatively, a strong blast of compressed air may be used.

Insert correct sized Chemset™ capsule or inject Chemsetmortar, without creating air pockets, into hole.

Drive stud to bottom of hole. Allow chemical to cure as per recommendations.

Insert anchor and push to required depth. Using the special setting tool, drive the expander plug down until shoulder of the setting punch meets top of the anchor.

Attach fixture and tighten nut in accordance with recommendedtightening torque.


14

2

Mechanical Anchors

1. Insert the assembled Boa Coil anchor. (The coil tab points up the anchor.) Tap anchor down to depth set mark and stop.

2. Wind the anchor down until the washer is firmly held to the fixture and stop. (For the number of turns required to set anchor refer to details above.)

3. Ensure washer is tight and snug fit.

4. The Boa Coil anchor is ready to take load. (The bolt can be removed leaving the coil in the hole. To re-insert, follow steps 2 and 3.)

SPATEC™ SAFETY ANCHORS~ Torque induced setting action

provides a “pulldown” action.~ The heavy duty expansion sleeve

provides a large expansion reserve.~ Heavy duty heat treated washers.

d Anchor L Anchor db Thread Size do Hole ø df Fixture Hole ø Tight Rec. Working Load kN Order No. Pack Size Length x x Torque 32 MPa Quantity

hL Hole Depth t Nom. Fixt. Thickness (Nm) Tensile Shear

10 108 M10 15 x 110 17 x 20 35 15.5 11.5 SA10108 2012 98 M12 18 x 95 21 x 13 60 14.3 16.7 SA12098 10

124 M12 18 x 120 21 x 25 60 16.2 27.6 SA12124 10 153 M12 18 x 120 21 x 50 60 16.2 27.6 SA12153 1016 149 M16 24 x 150 27 x 25 145 26.3 52.3 SA16149 10

167 M16 24 x 150 27 x 50 145 26.3 31.1 SA16167 1020 189 M20 28 x 190 32 x 30 305 45.1 75.8 SA20189 6

219 M20 28 x 190 32 x 60 305 45.1 75.8 SA20219 624 197 M24 32 x 210 36 x 30 525 53.4 72.7 SA24197 4

236 M24 32 x 210 36 x 60 525 53.4 101.9 SA24236 4

Refer to page 13 for details of installation recommendations and limitations.

BOA™ COIL ANCHORS~ High strength expansion anchor.~ Positive fix.~ Cyclic load resistant.~ Pull down capacity.~ Through fixing.~ True dimension.

d Anchor L Anchor do Hole ø df Fixture Hole ø Tight Rec. Working Load kN Complete Pack Tab Only Pack Size Length x x Torque 32 MPa Anchor Quantity Order No. Quantity

hL Hole Depth t Nom. Fixture Thickness Tensile Shear Order No.

1/4” /6.5 mm 65 6.5 x 70 8 x 30 5 turns 2.1 2.7 BAC04065 100 BAC04 1003/8” /10 mm 60 10 x 70 12 x 6 5 turns 5.2 5.9 BAC06060 100 BAC06 100

75 10 x 80 12 x 20 5 turns 5.2 5.9 BAC06075 100 BAC06 100 100 10 x 90 12 x 45 5 turns 5.2 5.9 BAC06100 50 BAC06 1001/2” /13 mm 75 13 x 90 16 x 6 5 turns 8.7 10.7 BAC08075 50 BAC08 100

100 13 x 105 16 x 30 5 turns 8.7 10.7 BAC08100 25 BAC08 100 140 13 x 130 16 x 70 5 turns 8.7 10.7 BAC08140 25 BAC08 1005/8” /16 mm 90 16 x 105 19 x 6 5 turns 13.2 18.4 BAC10090 25 BAC10 50

125 16 x 134 19 x 40 5 turns 13.2 18.4 BAC10125 25 BAC10 503/4” /19 mm 85 19 x 105 21 x 6 5 turns 14.2 20.5 BAC12085 20 BAC12 50

115 19 x 130 21 x 15 5 turns 18.7 26.9 BAC12115 20 BAC12 50 150 19 x 155 21 x 50 5 turns 18.7 26.9 BAC12150 10 BAC12 50

Refer to page 13 for details of limitations.

BOA™ COIL ANCHOR INSTALLATION (Refer to page 13 for hole preparation.)


Mechanical Anchors

15

2

Mechanical Anchors

Zn

TRUBOLT™ STUD ANCHORS~ Through fixing.~ One piece wrap around sleeve.~ Anti-rotation lugs.~ True dimension.~ Pull down capacity.

INSTALLATION TORQUE RECOMMENDATIONS All values in Nm.

d Anchor Size 6 8 10 12 16 20 24

Zinc 10 20 35 50 155 355 595Galvanised 10 20 35 50 155 355 595Stainless Steel 10 20 35 50 155 355 595

d Anchor L Anchor db Thread Size do Hole ø df Fixture Hole ø Rec. Working Load kN Order No. Pack Size Length x x x 32 MPa Quantity

Lt Thread Length hL Hole Depth t Nom. Fixt. Thickness Tensile Shear

6 45 M6 x 20 6 x 40 8 x 5 2.1 2.8 T06045 – T06045SS 100 55 M6 x 30 6 x 45 8 x 15 2.1 2.8 T06055 – T06055SS 100 85 M6 x 60 6 x 70 8 x 45 2.1 2.8 T06085 – T06085SS 100 120 M6 x 95 6 x 70 8 x 80 2.1 2.8 T06120 – – 508 50 M8 x 20 8 x 40 10 x 3 2.6 4.9 T08050 – T08050SS 100

65 M8 x 35 8 x 60 10 x 15 3.1 4.9 T08065 T08065GH T08065SS 100 80 M8 x 50 8 x 60 10 x 30 3.1 4.9 T08080 – – 50 90 M8 x 60 8 x 60 10 x 40 3.1 4.9 T08090 – T08090SS 100 130 M8 x 85 8 x 95 10 x 85 3.1 4.9 T08130 – T08130SS 5010 65 M10 x 30 10 x 65 12 x 5 4.2 6.8 T10065 – T10065SS 50

75 M10 x 40 10 x 70 12 x 15 4.2 6.8 T10075 T10075GH T10075SS 50 90 M10 x 55 10 x 70 12 x 30 4.2 6.8 T10090 T10090GH T10090SS 50 120 M10 x 85 10 x 85 12 x 50 4.2 6.8 T10120 – T10120SS 2012 80 M12 x 35 12 x 75 15 x 12 5.8 8.6 T12080 T12080GH T12080SS 20

100 M12 x 50 12 x 80 15 x 25 5.8 8.6 T12100 T12100GH T12100SS 20 120 M12 x 70 12 x 90 15 x 45 5.8 8.6 T12120 – – 20 140 M12 x 80 12 x 90 15 x 65 5.8 8.6 T12140 T12140GH T12140SS 20 180 M12 x 80 12 x 105 15 x 100 5.8 8.6 T12180 T12180GH T12180SS 2016 100 M16 x 45 16 x 95 19 x 5 9.1 14.4 T16100 T16100GH T16100SS 20

125 M16 x 65 16 x 110 19 x 20 9.8 14.4 T16125 T16125GH T16125SS 20 150 M16 x 85 16 x 120 19 x 45 9.8 14.4 T16150 T16150GH T16150SS 20 175 M16 x 85 16 x 120 19 x 70 9.8 14.4 T16175 T16175GH T16175SS 20 220 M16 x 85 16 x 145 19 x 115 9.8 14.4 T16220 – – 2020 120 M20 x 50 20 x 115 24 x 10 12.1 22.3 T20120 T20120GH T20120SS 10

160 M20 x 50 20 x 135 24 x 40 12.1 22.3 T20160 T20160GH T20160SS 10 215 M20 x 50 20 x 160 24 x 95 12.1 22.3 T20215 T20215GH – 1024 175 M24 x 65 24 x 165 28 x 40 13.1 39.4 T24175 – – 5

260 M24 x 65 24 x 205 28 x 125 13.1 39.4 T24260 – – 10


TRUFAST PUSH-PULL ANCHORS~ Tie wires for suspended ceilings.~ Catenary wire fixing.

d Anchor L Anchor db Thread Size do Hole ø Rec. Working Load kN Order No. Pack Size Length x 32 MPa Quantity

hL Hole Depth Tensile

6 55 - 6 x 45 1.4 TFE06 100



16

2

Mechanical AnchorsDYNABOLT™ ANCHORS~ Through fixing.~ Fully assembled.~ Variety of head designs.~ Unique sleeve design.~ Integral nut and washer.~ Pull down capacity.

INSTALLATION TORQUE RECOMMENDATIONS All values in Nm.

d Anchor Size 6 8 10 12 16 20

Zinc 4 9 20 40 70 150Galvanised 4 9 20 40 70 150Stainless Steel 4 9 20 40 70 150

d Anchor L Anchor db Thread Size do Hole ø df Fixture Hole ø Rec. Working Load kN Order No. Pack Size Length x x 32 MPa Quantity

hL Hole Depth t Nom. Fixt. Thickness Tensile Shear

6 38 M4.5 6 x 45 8 x 3 1.8 2.5 DP06040 – DP06040SS 100 57 M4.5 6 x 60 8 x 6 1.8 2.5 DP06060 – DP06060SS 1008 40 M6 8 x 45 10 x 3 4.2 4.0 DP08040 – DP08040SS 100

66 M6 8 x 65 10 x 30 4.2 4.0 DP08065 – DP08065SS 50 92 M6 8 x 65 10 x 50 4.2 4.0 DP08090 – DP08090SS 5010 41 M8 10 x 45 12 x 3 3.8 6.4 DP10040 DP10040GH – 50

49 M8 10 x 55 12 x 12 3.8 6.4 DP10050 DP10050GH DP10050SS 50 76 M8 10 x 70 12 x 30 5.9 6.4 DP10075 DP10075GH DP10075SS 50 103 M8 10 x 75 12 x 50 5.9 6.4 DP10100 DP10100GH DP10100SS 25 124 M8 10 x 80 12 x 75 5.9 6.4 DP10125 – – 2012 55 M10 12 x 65 15 x 10 5.0 7.9 DP12060 DP12060GH DP12060SS 25

70 M10 12 x 65 15 x 15 7.7 7.9 DP12070 DP12070GH DP12070SS 25 98 M10 12 x 90 15 x 40 7.7 7.9 DP12100 DP12100GH DP12100SS 20 126 M10 12 x 90 15 x 75 7.7 7.9 DP12125 DP12125GH DP12125SS 2016 62 M12 16 x 75 19 x 3 7.7 10.5 DP16065 DP16065GH – 20

106 M12 16 x 115 19 x 30 11.9 10.5 DP16110 DP16110GH – 10 140 M12 16 x 120 19 x 65 11.9 10.5 DP16140 DP16140GH – 1020 81 M16 20 x 90 24 x 10 10.8 15.6 DP20080 DP20080GH – 10

113 M16 20 x 115 24 x 20 16.6 15.6 DP20115 DP20115GH – 5 157 M16 20 x 150 24 x 65 16.6 15.6 DP20160 – – 5


DYNABOLT™ HEX BOLT ANCHORS~ Ideal for hollow brick and block applications.~ Decorative hex head.

d Anchor L Anchor db Thread Size do Hole ø df Fixture Hole ø Rec. Working Load kN Order No. Pack Size Length x x 32 MPa Quantity


8 45 M6 8 x 45 10 x 10 2.7 4.0 DP08045H DP08045HSS 100 70 M6 8 x 65 10 x 30 4.2 4.0 DP08070H DP08070HSS 50 95 M6 8 x 70 10 x 50 4.2 4.0 DP08095H – 5010 45 M8 10 x 50 12 x 3 3.8 6.4 DP10045H DP10045HSS 50

55 M8 10 x 60 12 x 12 3.8 6.4 DP10055H – 50 60 M8 10 x 65 12 x 10 5.9 5.4 – DP10060HSS 50 80 M8 10 x 85 12 x 30 5.9 6.4 DP10080H DP10080HSS 50 105 M8 10 x 80 12 x 50 5.9 6.4 DP10105H DP10105HSS 2512 65 M10 12 x 70 15 x 10 5.0 7.9 DP12065H - 25

75 M10 12 x 75 15 x 15 7.7 7.9 DP12075H DP12075HSS 25 110 M10 12 x 100 15 x 40 7.7 7.9 DP12105H - 2016 70 M12 16 x 80 19 x 3 7.7 10.5 DP16070H - 20

110 M12 16 x 115 19 x 30 11.9 10.5 DP16110H - 10



Mechanical Anchors

17

2

Mechanical Anchors

Round Head (R)

Component Sets

Flat Head (F)

DYNABOLT™ POST HEAD ANCHORS~ Decorative finish.

d Anchor L Anchor db Thread Size do Hole ø df Fixture Hole ø Bolt Style Rec. Working Load kN Order No. Pack Size Length x x 32 MPa Quantity


6 55 M4.5 6 x 55 8 x 20 Round 1.8 2.5 DP06055R - 100 60 M4.5 6 x 45 8 x 10 Flat 1.8 2.5 DP06060F DP06060FSS 100 75 M4.5 6 x 60 8 x 40 Round 1.8 2.5 DP06075R - 100 75 M4.5 6 x 70 8 x 40 Flat 1.8 2.5 DP06075F DP06075FSS 100 95 M4.5 6 x 60 8 x 60 Round 1.8 2.5 DP06095R - 100 100 M4.5 8 x 70 8 x 50 Flat 1.8 2.5 DP06100F - 1008 60 M6 8 x 55 10 x 25 Round 2.7 4.0 DP08060R - 100

60 M6 8 x 55 10 x 25 Flat 2.7 4.0 DP08060F - 100 85 M6 8 x 65 10 x 50 Flat 2.7 4.0 DP08085F - 5010 75 M8 10 x 30 12 x 40 Flat 3.8 6.4 DP10075F - 50

100 M8 10 x 65 12 x 65 Flat 3.8 6.4 DP10100F - 50 125 M8 10 x 70 12 x 80 Flat 3.8 10.1 DP10125F - 25


DYNABOLT™ SPECIALS

d Anchor L Anchor db Thread Size do Hole ø Bolt Style Rec. Working Load kg Order No. Pack Size Length x 32 MPa Quantity

hL Hole Depth Tensile

6 26 M4.5 6 x 30 Set Lok 50 kg - 0.49 D06026S 500 28 M4.5 6 x 41 Set Lok 75 kg - 0.74 D06038S 1008 – M6 8 x 35 Component Set - DC08040 100

31 M6 8 x 40 Tire Wire 250 kg - 2.45 D08045E 100 31 M6 8 x 40 Hook Bolt 60 kg - 0.59 D08045K 100 40 M6 8 x 45 Eye Bolt 60 kg - 0.59 D08042X 10010 – M8 10 x 40 Component Set - DC10050 10012 – M10 12 x 50 Component Set - DC12060 50


DYNABOLT™ POST SCREWS

d Anchor L Anchor db Thread Size df Fixture Hole ø Head Style Order No. Pack Size Length Quantity

6 19 M4.5 8 Round - DR045SS 100 20 M4.5 8 Flat RFM045 DF045SS 1008 22 M6 10 Round DR06 DR06SS 100

23 M6 10 Flat RFM06 DF06SS 100 18 M6 10 Acorn RAM06 - 100 44 M6 10 Tie Wire REM06 - 10010 24 M8 12 Round DR08 - 100

27 M8 12 Flat RFM08 DF08SS 100 47 M8 12 Tie Wire REM08 - 10012 52 M10 15 Tie Wire REM10 - 5016 53 M12 19 Tie Wire REM12 - 25


18

2

Mechanical Anchors

Flanged

Standard

Setting Tool

LOXIN™ SHIELD ANCHORS~ Available in both metric and imperial.~ Female thread.~ Shallow embedment.~ Captive expander nut.

d Anchor L Anchor db Thread Size do Hole ø df Fixture Hole ø Rec. Working Load kN Order No. Pack Size Length x 32 MPa Quantity

hL Hole Depth Tensile Shear

1/4” * 35 1/4” 1/2” x 40 3/8” 2.2 1.3 RLW04 505/16” * 52 5/16” 5/8” x 60 7/16” 4.0 2.4 RLW05 253/8” * 52 3/8” 5/8” x 60 1/2” 5.6 3.8 RLW06 251/2” * 65 1/2” 7/8” x 70 5/8” 8.0 5.5 RLW08 256 35 M6 13 x 40 8 2.2 1.3 RLM06 508 52 M8 16 x 60 10 4.0 2.4 RLM08 2510 52 M10 16 x 60 12 5.6 3.8 RLM10 2512 65 M12 22 x 70 15 8.0 5.5 RLM12 2516 75 M16 25 x 80 19 10.1 10.2 RLM16 25

* BSW “ Whitworth” imperial threads.Refer to page 13 for details of installation recommendations and limitations.

DYNASET™ ANCHORSDROP-IN ANCHORS~ Available in both metric and imperial. ~ Thin walled-smaller drill size used.~ Flush fitting-no protrusions.~ Shallow embedment.~ Permanent anchorage.

d Anchor L Anchor db Thread Size do Hole ø Style Setting Rec. Working Load kN Order No. Pack Size Length x x Tool 32 MPa Quantity

Lt Thread Length hL Hole Depth Tensile Shear

6 25 M6 x 11 8 x 28 Standard SETDS1 2.8 2.2 DSM06 DSM06SS 1008 30 M8 x 13 10 x 33 Standard SETDS2 3.8 2.9 DSM08 DSM08SS 5010 30 M10 x 14 12 x 30 Flanged SETDF3 3.8 2.9 DSF10 - 50

40 M10 x 16 12 x 43 Standard SETDS3 6.0 3.5 DSM10 DSM10SS 5012 50 M12 x 21 16 x 53 Standard SETDS4 8.5 6.6 DSM12 DSM12SS* 2516 65 M16 x 28 20 x 68 Standard SETDS5 12.7 10.4 DSM16 DSM16SS 2020 80 M20 x 35 25 x 83 Standard SETDS6 17.5 13.1 DSM20 - 10

Note: All imperial threads are UNC except 1/2” which comes in UNC and BSW.* SS requires 15mm hole.Refer to page 13 for details of installation recommendations and limitations.

SAFETY RING ANCHORS~ For use with Dynaset DSM12SS only.~ Secure fixing for high rise maintenance.~ Complies with AS/NZS1891.4.

d Anchor L Anchor db Thread Size dh Ring ø do Hole ø Setting Order No. Pack Size Length x Tool Quantity

hL Hole Depth

16 138 M12 16 15 x 125 SETSA4 RSR12GM RSR12SS 10

Note: Request Ramset Tech Data Sheet for installation instructions.


Mechanical Anchors

19

2

Mechanical AnchorsALLTHREAD ROD~ Available in metric.~ Overhead pipework and cable tray.~ Cast in anchor bolt.~ Bracing and formwork systems.~ Tie down systems in high wind areas.

db Thread L Thread Order No. Pack Size Length Quantity

M6 3000 RTRM06L3 - 10M8 3000 RTRM08L3 - 10M10 3000 RTRM10L3 - 10M12 3000 RTRM12L3 - 10M16 1000 RTRM16L1 RTRM16L1GH 10M20 1000 RTRM20L1 RTRM20L1GH 10M24 1000 - RTRM24L1GH 5

COUPLINGS, NUTS & WASHERS~ For use with threaded rod and PA threaded studs (see page 5).

db Thread L Thread Coupling Pack Nut & Washer Pack Size Length Order No. Quantity Order No. Quantity

M6 - - - RTKM06 - 100M10 30 RTCM10 50 RTKM10 - 50M12 36 RTCM12 20 RTKM12 RTKM12GH 20M16 - - - RTKM16 RTKM16GH 20M20 60 RTCM20 10 RTKM20 RTKM20GH 20M24 72 RTCM24 10 - - -


20

2

Chemical AnchorsRAMSET CHEMSET™ CAPSULESCHEMSET™ HAMMER CAPSULES~ Stress free anchoring.~ Chemical bonding highly resistant to dynamic loads.~ No power tools or accessories required to set stud.~ Suitable for use with Chemset anchor studs and deformed rebar.

d Stud Size do Drill Size Rec. Working Load kN Deform Rebar do Drill Size Rec. Working Load kN Capsule ø Order No. Pack x Stud 30 MPa Nominal Size Bar 32 MPa x Quantity

hL Hole Depth Tensile Shear Tensile Shear Capsule Length

8 10 x 80 6.4 4.4 - - 6.4 4.4 9 x 80 HAC08 1010 12 x 90 8.7 7.1 - - 8.7 7.1 11 x 90 HAC10 1012 14 x 110 12.4 10.5 12 15 12.4 10.5 13 x 110 HAC12 1016 18 x 125 20.1 19.8 16 20 19.1 19.8 17 x 125 HAC16 10


CHEMSET™ MAXIMA™ SPIN CAPSULES~ Stress free anchoring.~ Chemical bonding.~ Use with Chemset anchor studs.~ Fast curing.~ Flooded holes.~ Overhead use possible.

d Anchor Size do Drill Size Capsule ø Rec. Working Load kN Order No. Pack x x 32 MPa Quantity

hL Hole Depth Capsule Length Tensile Shear

8 10 x 80 9.5 x 80 6.4 4.4 CHEM08 1010 12 x 90 11.0 x 80 8.7 7.1 CHEM10 1012 14 x 110 13.0 x 95 12.4 10.5 CHEM12 1016 18 x 125 17.0 x 95 18.1 19.8 CHEM16 1020 24 x 150 21.5 x 115 29.0 30.0 CHEM2024 624 26 x 160 21.5 x 115 33.5 43.4 CHEM2024 6


CHEMSET™ ANCHOR STUDS~ Reliable heavy duty anchoring system.~ Suits all Chemset systems including injection.~ Stress free system with small span and edge distance.~ Easy to install.~ Grade 5.8 carbon steel.~ Hex drive for spin capsules.

d Anchor L Anchor db Thread do Drill Size t Nominal Fixture Order No. Pack Size Length Size x Thickness Quantity

hL Hole Depth

8 110 M8 10 x 80 15 CS08110 CS08110GH CS08110SS 1010 130 M10 12 x 90 25 CS10130 CS10130GH CS10130SS 1012 160 M12 14 x 110 30 CS12160 CS12160GH CS12160SS 10

180 M12 14 x 110 50 CS12180 - - 2016 190 M16 18 x 125 40 CS16190 CS16190GH CS16190SS 1020 260 M20 24 x 150 80 CS20260 CS20260GH CS20260SS 624 300 M24 26 x 160 105 CS24300 CS24300GH CS24300SS 6


21

2

Chemical Anchors

RAMSET CHEMSET™ INJECTION MORTARCHEMSET™ INJECTION 100 SERIES~ Multi purpose.~ Can be used close to the edge.~ Good strength, low shrinkage.~ Hollow block and overhead applications.~ Damp holes.~ Fast curing.


Standard Chemset Kit (2 x 400ml Cartridges & 4 Mixer Nozzles) ISKP 2/4Chemset 101 Mini Cartridge - 150ml (temperate climate) C101M 1Chemset 101 Cartridge - 400ml (temperate climate)* C101C 1Chemset 101 Jumbo Cartridge - 750ml (temperate climate)* C101J 1

Tropical Chemset Kit (x 2 400ml Cartridges & 4 Mixer Nozzles) ISKPT 2/4Chemset 102 Cartridge - 400ml (tropical climate)* C102C 1Chemset 102 Jumbo Cartridge - 750ml (tropical climate)* C102J 1

Mixer Nozzle for 100 Series ISNP 5

* Nozzles sold separately.

CHEMSET™ INJECTION 800 SERIES~ High performance.~ Excellent chemical and moisture

resistance.~ Tough and durable for long term high strength.~ No shrinkage, low odour.~ Excellent vibration and dynamic load resistance.

Chemset 801 Cartridge - 400ml (temperate climate)* C801C 1Chemset 801 Jumbo Cartridge - 750ml (temperate climate)* C801J 1Chemset 802 Cartridge - 400ml (tropical climate)* C802C 1Chemset 802 Jumbo Cartridge - 750ml (tropical climate)* C802J 1

Mixer Nozzle for 800 Series ISNE 5

* Nozzles sold separately.

CHEMSET™ INJECTION ROD~ Economical.~ Suits Chemset Injection systems.~ For other sizes use Chemset anchor studs pg 20.

d Anchor L Anchor Thread Size do Drill Size t Nominal Fixture Order No. Pack Size Length x Thickness Quantity

hL Hole Depth

12 160 M12 14 x 110 30 CR12160 CR12160GH 2016 190 M16 18 x 125 40 CR16190 CR16190GH 20

PERFORMANCE DETAILS OF RAMSET CHEMSET™ INJECTION

d Anchor Hole Depth Rec. Working Load kN 32 MPa Size 100 Series with Grade 4.6 Steel Injection Rod 800 Series with Grade 5.8 Steel Anchor Stud

Tension Shear Tension Shear

8 80 4.4 3.6 6.5 4.4 10 90 5.8 5.8 9.7 7.1 12 110 8.3 8.4 14.1 10.5 16 125 13.0 15.6 19.2 19.8 20 150 21.4 24.3 27.6 30.0 24 160 31.5 35.0 32.7 43.4



22

2

Chemical Anchors

Sleeve

Sieve

RAMSET CHEMSET™ INJECTION KITCHEMSET™ MORTAR TOOL KIT~ Complete injection system kit. Designed to suit:~ Contains: Impact resistant toolbox. CUA Applicator Eye protection. 1 x jumbo cartridge, or Hole blower. 2 x regular cartridges Hole cleaning brushes x 3. plus nozzles Instruction Manual.


Chemset Anchoring Kit CMTK 1

CHEMSET™ SYSTEMS APPLICATOR~ Tough, versatile, mechanical cartridge applicator.~ Easy to use.~ Suits Chemset 100 & Chemset 800 Series.~ Suits 150ml, 400ml & 750ml cartridges.~ Suits standard caulking cartridges.

Chemset Universal Applicator CUA 1

REMEDIAL WALL TIES~ Non corrosive. ~ Non expansion, stress free fastening~ Flush or below the surface finish.~ Either side or non destructive brick installation.~ Suits standard double block cavity wall.~ For use with Chemset Injection Mortar.

Material L Anchor do Drill Size Order No. Pack Length Quantity

Nylon 225 12 RA225 100

HOLLOW CONCRETE BLOCK SLEEVES AND SIEVES~ Sleeves and sieves for use with Chemset stud bolts and

Chemset Injection Rod.~ Positive fix into cavity of concrete block.

Sleeve/Sieve do Drill Size To Suit Stud Suit All Thread Description Order No. Pack Length Quantity

64 12 8 M8 Nylon Sleeve ISS08 100 64 14 10 M10 Nylon Sleeve ISS10 100 64 16 12 M12 Nylon Sleeve ISS12 100 1000 12 6/8 M6/M8 Fine Metal Mesh Sieve ISM10 1 1000 16 10/12 M10/M12 Fine Metal Mesh Sieve ISM12 1 1000 22 16 M16 Fine Metal Mesh Sieve ISM16 1


23

2

Chemical Anchors

Brush

Blower

CHEMSET™ ANCHORING SYSTEM ACCESSORIESHOLE CLEANING ACCESSORIES~ Brushes for cleaning debris from hole sides.~ Blower for removing debris from hole.

Description do Drill Size Anchor Size Length Order No. Pack Quantity

Brush 10 - 14 8 - 12 220 HCBT13 1 Brush 18 - 22 16 - 20 300 HCBT20 1 Brush 22 - 26 20 - 24 310 HCBT26 1 Blower - - - HCP 1

RETAINING COLLARS~ Retaining collars for overhead application.~ Prevents drips.

Anchor Size To Suit Anchor Order No. Pack Quantity

8 CS08110 ISR08 10010 CS10130 ISR10 10012 CS12160 ISR12 10016 CS16190 ISR16 100


24

2

Mechanical Anchors

ANKASCREW™ ANCHORS~ Screw in anchor.~ Grips without expansion. ~ Self tapping anchor.~ Easy removal. ~ Close to edge fixing.

d Anchor L Anchor do Hole ø Fixture Hole ø Overdrill Minimum Head Type Rec. Working Load kN Order No. Pack Size Length x x Depth Embedment 32 MPa Quantity

hL Hole Depth Max. Fixture Tensile Shear Thickness

6 50 6 x 40 8 x 20 10 30 Csk Pozi 2.45 3.73 AS06050F - - 100 50 6 x 40 8 x 20 10 30 Hex Flange 2.45 3.73 AS06050H - - 100 50 6 x 40 8 x 20 10 30 Hook 2.45 3.73 AS06050K - - 50 50 6 x 40 8 x 20 10 30 Welded Eye 2.45 3.73 AS06050X - - 50 75 6 x 40 8 x 45 10 30 Csk Pozi 2.45 3.73 AS06075F - - 100 75 6 x 40 8 x 45 10 30 Hex Flange 2.45 3.73 AS06075H - - 100 100 6 x 40 8 x 70 10 30 Csk Pozi 2.45 3.73 AS06100F - - 100 100 6 x 40 8 x 70 10 30 Hex Flange 2.45 3.73 AS06100H - - 1008 50 8 x 55 10 x 10 15 40 Csk Int Hex 4.09 5.62 AS08050F - - 100

55 8 x 55 10 x 15 15 40 Hook 4.09 5.62 AS08055K - - 50 55 8 x 55 10 x 15 15 40 Welded Eye 4.09 5.62 AS08055X - - 50 60 8 x 55 10 x 20 15 40 Hex Head 4.09 5.62 AS08060H - - 100 75 8 x 55 10 x 35 15 40 Csk Int Hex 4.09 5.62 AS08075F - - 100 75 8 x 55 10 x 35 15 40 Hex Head 4.09 5.62 AS08075H - - 100 100 8 x 55 10 x 60 15 40 Hex Head 4.09 5.62 AS08100H - - 10010 60 10 x 70 12 x 10 20 50 Hex Head 5.73 9.53 AS10060H - - 50

75 10 x 70 12 x 25 20 50 Hex Head 5.73 9.53 AS10075H - - 50 100 10 x 70 12 x 50 20 50 Hex Head 5.73 9.53 AS10100H - - 50 150 10 x 70 12 x 100 20 50 Hex Head 5.73 9.53 AS10150H - - 2012 75 12 x 85 14 x 15 25 60 Hex Head 6.96 12.90 AS12075H - - 50

100 12 x 85 14 x 40 25 60 Hex Head 6.96 12.90 AS12100H - - 50 150 12 x 85 14 x 90 25 60 Hex Head 6.96 12.90 AS12150H - - 20

Note: Hole Depth = Bolt Length - Fixture Thickness + Overdrill DepthRefer to page 13 for details of installation recommendations and limitations.

SHUREDRIVE ANCHORS~ All metal fixing for thin materials.~ Tamperproof.~ Non corrosive zinc alloy body.~ Flush fitting expander nail head.

d Anchor L Anchor dh Head ø do Hole ø df Fixture Hole ø Rec. Working Load kN Order No. Pack Size Length x x 32 MPa Quantity

hL Hole Depth t Nom. Fixt. Thick. Tensile Shear

5 22 11 5 x 21 6 x 4 0.8 1.0 SDM05022 - 1006 30 13 6 x 22 7 x 10 1.0 1.4 SDM06030 SDM06030SS 100

50 13 6 x 22 7 x 30 1.0 1.4 SDM06050 - 100



Mechanical Anchors

25

2

Mechanical Anchors

EASYDRIVE ANCHORS~ Fully assembled through fixing.~ Installed with hammer or screwdriver.~ Lightweight application.

d Anchor L Anchor dh Head ø do Hole ø t Nominal Fixture Rec. Working Load kN Order No. Pack Size Length x Thickness 32 MPa Quantity

hL Hole Depth Tensile Shear

5 33 9 5 x 27 6 0.18 0.27 ED05033 - ED05033SS 100 50 9 5 x 30 20 0.18 0.27 ED05050 ED05050BL - 1006 42 10 6 x 30 12 0.28 0.42 ED06042 - ED06042SS 100

55 10 6 x 30 25 0.28 0.42 ED06055 ED06055BL ED06055SS 100 75 10 6 x 30 45 0.28 0.42 ED06075 - ED06075SS 1008 80 12 8 x 45 35 0.40 0.60 ED08080 - - 50

120 12 8 x 45 75 0.40 0.60 ED08120 - - 50


NYLON ANCHORSLIGHT DUTY HAMMER IN ANCHOR~ Choice of head styles.~ From 20 to 75 mm long.~ From 5 to 6 mm diameter.~ For fixing to solid and hollow masonry materials.

d Anchor L Anchor dh Head ø do Hole ø df Fixture Hole ø Head Style Rec. Working Load kN Order No. Pack Size Length x x x 32 MPa Quantity

d Anchor ø hL Hole Depth t Nom. Fixt. Thick. Tensile Shear

5 20 11 x 5 5 x 18 5 x 2 Mushroom 0.2 0.5 TNM320 - 100 25 11 x 5 5 x 20 5 x 5 Mushroom 0.2 0.5 TNM325 TNM325SS 100 25 9 x 5 5 x 20 5 x 5 Round 0.2 0.5 TNR325 TNR325SS 100 25 8 x 5 5 x 20 5 x 5 Flat 0.2 0.5 TNL325 - 100 38 9 x 5 5 x 25 5 x 25 Round 0.3 0.5 TNR338 - 1006.5 25 11 x 6.5 6.5 x 20 6.5 x 5 Countersunk 0.2 0.8 TNF425 - 100

25 14 x 6.5 6.5 x 20 6.5 x 5 Mushroom 0.2 0.8 TNM425 TNM425SS 100 25 11 x 6.5 6.5 x 20 6.5 x 5 Round 0.2 0.8 TNR425 - 100 38 11 x 6.5 6.5 x 25 6.5 x 13 Countersunk 0.3 0.8 TNF438 - 100 38 14 x 6.5 6.5 x 25 6.5 x 13 Mushroom 0.3 0.8 TNM438 - 100 38 11 x 6.5 6.5 x 25 6.5 x 13 Round 0.3 0.8 TNR438 - 100 50 11 x 6.5 6.5 x 25 6.5 x 25 Countersunk 0.3 0.8 TNF450 - 100 50 14 x 6.5 6.5 x 25 6.5 x 25 Mushroom 0.3 0.8 TNM450 - 100 50 11 x 6.5 6.5 x 25 6.5 x 25 Round 0.3 0.8 TNR450 - 50 75 11 x 6.5 6.5 x 25 6.5 x 50 Countersunk 0.3 0.8 TNF475 - 50 75 14 x 6.5 6.5 x 25 6.5 x 50 Mushroom 0.3 0.8 TNM475 - 50



26

2

Mechanical AnchorsBRICKPLUGS~ For fixing into hollow and solid brick.~ Light weight fixing.

d Anchor L Anchor do Hole ø Order No. Pack Size Length x Quantity

hL Hole Depth

6 33 6 x 40 DNM06 1008 50 8 x 55 DNM08 5010 60 10 x 65 DNM10 2512 70 12 x 75 DNM12 15

RAMPLUGS~ For light weight screw fixing.~ For fixing to solid concrete and masonry.~ For fixing to hollow bricks.~ Suitable for fixing to AAC.

STANDARD PLUGS

d Anchor L Anchor Screw Gauge do Hole ø Order No. Pack Size Length x Quantity

hL Hole Depth

5 25 5 - 7 5 x 35 DNP05 2006 30 6 - 9 6 x 40 DNP06 2007 35 9 - 12 7 x 50 DNP07 1008 40 10 - 14 8 x 55 DNP08 10010 50 14 - 18 10 x 65 DNP10 5012 60 18 - 24 12 x 75 DNP12 25

LONG PLUGS 6 60 6 - 9 6 x 70 DLP06 100 8 80 10 - 14 8 x 80 DLP08 100 10 90 14 - 18 10 x 95 DLP10 50

ULTRA LONG PLUGS

d Anchor L Anchor do Hole ø t Nominal Fixture Head Style Order No. Pack Size Length x Thickness Quantity

hL Hole Depth

10 80 10 x 100 10 C/S Pozi DUP10080F 25 80 10 x 100 10 Hex Hd DUP10080H 25 100 10 x 110 10 C/S Pozi DUP10100F 25 100 10 x 110 10 Hex Hd DUP10100H 25 140 10 x 150 45 C/S Pozi DUP10135F 25 140 10 x 150 45 Hex Hd DUP10135H 25 160 10 x 170 70 C/S Pozi DUP10160F 25 160 10 x 170 70 Hex Hd DUP10160H 25 No.3 Pozi Bit 527141 1

Long Plugs

Standard Plugs

Ultra Long Plugs


Mechanical Anchors

27

2

Mechanical AnchorsCONCRETE NAILS~ High strength and ductile - will not easily break.~ Available pre-assembled with washers to improve pullover strength.

d Anchor L Anchor dh Head ø Shank Style Order No. Pack Order No. Pack Size Length Washer Quantity No Washer Quantity

2.4 15 4.5 Plain CW415 100 - - 15 4.5 Plain CW415Q500 500 - - 20 4.5 Plain CW420 100 CD420 100 20 4.5 Plain CW420Q500 500 - - 25 4.5 Plain CW425 100 CD425 100 25 4.5 Plain CW425Q500 500 - - 30 4.5 Plain CW430 100 CD430 100 30 4.5 Plain CW430Q500 500 - - 40 4.5 Plain CW440 100 CD440 100 45 4.5 Plain - - CD445 100 50 4.5 Plain - - CD450 1002.45 50 4.5 Plain - - CF450W 70003.2 20 5.0 Plain - - CD520 100

25 5.0 Plain - - CD525 100 30 5.0 Plain - - CD530 100 38 5.0 Striated - - CK540 100 40 5.0 Plain CW540 100 CD540 100 50 5.0 Plain CW550 100 CD550 1003.8 50 6.0 Plain - - CF650 100

60 6.0 Plain - - CF660 100 75 6.0 Plain - - CF675 100 100 6.0 Plain - - CF699 1004.2 50 7.0 Striated - - CK750 100

63 7.0 Striated - - CK760 100 75 7.0 Striated - - CK775 1006.5 70 14.0 Plain - - CR970 500

100 14.0 Plain - - CR999 250

CONCRETE NAIL HOLDER~ Used with washered concrete nails.


Concrete Nail Holder SETCW 1

PLASTIC SPAGHETTI~ Light duty application.~ Economical simple fixing.~ Quick installation. Nail or screw in.~ Cut to required length.

Drill Size Order No. 5 m Roll 50 m Roll

5.5 463609 RSP


28

2

Mechanical AnchorsSTAR PLUG PLASTIC PLUGS~ Tapered point (frame pack or polybag).~ From 5 to 8 mm diameter.~ Choice of frame pack, polybag or 100 m roll.

L Length Colour Drill Size Screw Gauge Order No. Order No. Box Order No. Bag x 100 m Roll Frame Pack Quantity Polybag Quantity Hole Depth of 25

25 White 5 x 25 4.5 - 6 720108 WPWH25 1000 464224 100 38 White 5 x 40 4.5 - 6 720108 WPWH38 1000 464255 100 25 Red 6 x 25 8 - 9 720115 WPRD25 1000 464286 100 32 Red 6 x 35 8 - 9 720115 WPRD32 1000 464316 100 38 Red 6 x 40 8 - 9 720115 WPRD38 1000 464347 100 50 Red 6 x 50 8 - 9 720115 WPRD50 500 464378 50 25 Green 7 x 25 10 - 12 720122 WPGR25 1000 464408 100 32 Green 7 x 35 10 - 12 720122 WPGR32 1000 464439 100 38 Green 7 x 40 10 - 12 720122 WPGR38 500 464460 50 50 Green 7 x 50 10 - 12 720122 WPGR50 500 464491 50 25 Blue 8 x 25 14 - 16 720139 WPBU25 1000 464521 100 38 Blue 8 x 40 14 - 16 720139 WPBU38 500 464552 50 50 Blue 8 x 50 14 - 16 720139 WPBU50 500 464583 50

Roll Frame Pack Polybag

ANKAMATE~ Light weight plastic anchor.~ Universal usage.~ Suits multiple screw sizes.

do Hole Size Sg Screw Gauge Order No. Pack Quantity

5.5 6 - 10 UP0610 1007.0 10 - 14 UP1014 100


29

2

Cast In AnchorsELEPHANTS’ FEET ANCHORS~ All steel threaded ferrule.~ For casting into pre-cast concrete and insitu cast concrete elements.~ High strength fastening point.

d Anchor Size Lt Thread Length AF Base L Depth into ch Cross Hole Rec. Working Load kN Order No. Pack x Dimension Concrete Diameter 32 MPa Quantity

db Thread Size A.F. Tensile Shear

10 20 x M10 19 45 R8 6.9 10.4 FE10045 FE10045GH - 25012 25 x M12 22 55 R8 9.6 13.5 FE12055 FE12055GH - 200

25 x M12 22 70 R8 9.6 17.2 FE12070 FE12070GH - 150 25 x M12 22 95 R8 9.6 21.0 FE12095 FE12095GH - 10016 32 x M16 29 70 R10 17.0 22.2 FE16070 FE16070GH - 100

32 x M16 29 95 R10 17.2 30.1 FE16095 FE16095GH - 7520 35 x M20 32 70 R10 19.1 26.2 FE20070 FE20070GH - 75

38 x M20 32 95 R10 26.4 30.1 FE20095 FE20095GH - 5024 35 x M24 38 70 Y12 20.9 32.3 FE24070 FE24070GH - 50

50 x M24 38 95 Y12 33.0 43.8 FE24095 FE24095GH - 40 50 x M24 38 115 Y12 39.8 53.0 FE24115 FE24115GH - 30


FERRULE CONCRETE INSERTS~ Suitable for use with Ferrule Support Chair.~ Must be installed with a Y12 x 300mm reinforcement cross bar.

d Anchor Size Lt Thread Length AF Base L Depth Into ch Cross Hole Rec. Working Load kN Order No. Pack x Dimension Concrete Diameter 32 MPa Quantity

db Thread Size A.F. Tensile Shear

12 45 x M12 28 65 15.0 13.9 21.0 FH12065 - - 100 49 x M12 28 96 15.0 20.3 21.0 FH12096 - - 10016 35 x M16 28 75 15.0 18.7 39.1 FH16075 FH16075GH - 100

49 x M16 28 96 15.0 28.6 39.1 FH16096 FH16096GH - 10020 35 x M20 28 75 15.0 18.7 61.2 FH20075 FH20075GH - 100

49 x M20 28 96 15.0 28.6 61.2 FH20096 FH20096GH - 100


CONCRETE INSERTS~ Stress free anchoring close to the edge.~ Cast in placement eliminates the need for drilling. ~ Ideal for shallow embedment as the anchor can be tied into

the reinforcing to distribute the load over wider area.

d Anchor Size Lt Thread Length od Outside ø L Depth Into Base Type ch Cross Hole Rec. Working Load kN Order No. Pack x x Concrete Diameter 32 MPa Quantity

db Thread Size AF Base Dim. A.F. Tensile Shear

10 20 x M10 14.2 x 19 44 Hex 8.7 5.0 8.2 - - TCM10RSS 2512 25 x M12 17.4 x 22 54 Hex 8.7 7.3 12.8 - - TCM12RSS 10016 32 x M16 22.2 x 29 75 Hex 15.0 12.3 23.1 - - TCM16RSS 5020 38 x M20 25.4 x 31.8 79.5 Hex 15.0 13.9 28.7 - - TCM20RSS 50



31

3

Power Tools

RD442 Single Speed Rotary Drill 32DD316 Impact Hammer Drill 32CSD12C Battery Operated Drill Driver 32

Straight Shank High Speed Drill Bits

High Speed Twist Drills 32Straight Shank Masonry Drill Bits 32

Dynadrill™ Rotary Hammers

DD521 Rotary Hammer 34DD525 Rotary Hammer 34DD524 Battery Operated Rotary Hammer 34DD530 Rotary Hammer 34DD542 Rotary Hammer 34

Dynadrill™ Accessories

Dynadrill Accessories 35

Carbide Drill Bits

Carbide Drill Bits 35Carbide Quatro Head Drill Bits 35

Rotary Combi-Hammers

DD560 Rotary Combi-Hammer 36DD575 Rotary Combi-Hammer 36

Demolition Hammers

DD605 Demolition Hammer 36DD610 Demolition Hammer 36

SDS-Max Drill Bits

SDS-Max Drill Bits 37

Core Bit Ratio System

Core Bit Ratio System 37

Chisels

Chisels 38

Industrial Angle Grinders

GR115S Angle Grinder 39GR230D Angle Grinder 39

Cutoff & Depressed Centre Wheels

Cutoff Centre Wheels 39Depressed Centre Wheels 39

3 Power Tools and Accessories


32

3

Power Tools and AccessoriesPOWER TOOLS

STRAIGHT SHANK HIGH SPEED DRILL BITSHIGH SPEED TWIST DRILLS~ Available in both metric and imperial.~ TU Point (Double Ended).

d Drill Size Order No. PackQuantity

1/8” DSUS04DE 10No. 30 DSNS30DE 10No. 20 DSNS20DE 10No. 11 DSNS11DE 10

STRAIGHT SHANK MASONRY DRILL BITS

d Drill Size x L Total Length Order No. PackQuantity

5 x 150 529107 15.5 x 150 529138 1

6 x 150 529169 16.5 x 150 529190 1

7 x 100 529015 18 x 150 529251 1

10 x 150 529282 112 x 150 529312 1

CSD12CBATTERY OPERATED DRILL DRIVERDrilling RangeDrill diameter in steel 13 mmDrill diameter in aluminium 15 mmDrill diameter in wood 25 mmMaximum screw diameter 12 gaugeDrill chuck range 2 - 13 mm

Description Order No.

Battery Pack PTUB17Charger (4.8 volts to 14 volts) UBC4814Charger (7.2 volts to 24 volts) UBC7224

RD442SINGLE SPEED ROTARY DRILLDrilling RangeDrill diameter in steel 10 mmDrill diameter in aluminium 13 mmDrill diameter in wood 25 mm

DD316IMPACT HAMMER DRILLDrilling RangeDrill dia. in concrete & stone – speed 1 20 mmDrill diameter in steel – speed 1 13 mmDrill diameter in wood – speed 1 40 mmDrill dia. in concrete & stone – speed 2 13 mmDrill diameter in steel – speed 2 8 mmDrill diameter in wood – speed 2 25 mm


Power Tools and Accessories

33

3

Ramset™ Power ToolsRamset Fasteners have been in the forefront of supplying rotaryhammers and power tools into the Australasian Construction marketfor more than 25 years.

With the introduction of the DD640 Dynadrill Rotary Hammer some 25 years ago a new standard in concrete drilling was set.

From that time onwards Ramset has maintained its position as thedominant supplier to the construction industry of the latest in rotaryhammer drilling and power tool technology.

The latest example of this from Ramset is the new range of R-Drivemachines, bringing a new dimension to tool life and performance inrotary hammers under 4 kg.

The new DD530 Dynadrill Rotary Hammer further highlights thisposition with its high performance, low weight and extremely long lifeof 50,000* holes which is almost 35% better than its nearest competitor.

Today when you buy a Dynadrill Rotary Hammer or power tool you canrest assured that these machines will give you the very latest inperformance and life.*(ø14 x 85 mm)

Carbide Drill BitsWith the introduction of the Ramset Rotary Hammer Drill Bits, a new higher level in drilling performance has been reached!

Rotary Hammer Drill Bits provide 25% longer tool holder life formachines fitted with R Drive tool holders! 25% faster drilling speeds!*25% more holes!* 25% tougher!*

And they cost no more than current drill bits!

Features● Suits all SDS Plus Machines.● Compatible with the older Ramset Dynadrill Rotary Hammer range

fitted with 63 Series tool holders.● Harder, tougher and new head design.● 4 fold spiral for efficient removal of drilling debris and dust.

Benefits● 25% more holes per bit.*● 25% faster in concrete.*● Durable head design for even reinforced concrete.● Less drill down time because of the improved R Drive tool holder

and retaining grooves to cope with the higher torque of today’sDynadrill Rotary Hammer range.

* For drill sizes up to 16 mm


34

3


DD521ROTARY HAMMERDrilling RangeDrill diameter in concrete 5 - 20 mmDrill diameter in steel up to 13 mmDrill diameter in wood 20 mmOptimum drilling (concrete) 5 - 8 mmQuick change chuck

DD524 CORDLESS24 V BATTERY OPERATED ROTARY HAMMERDrilling RangeDrill diameter in concrete 5 - 16 mmDrill diameter in steel up to 13 mmDrill diameter in wood 20 mmOptimum drilling (concrete) 5 - 8 mmQuick change chuck


Rapid Battery Charger to suit CSD12C,SDB12 & DD542 (15 min)• (27 min)* UBC72241.7 Ah Battery• DD524BP173.0 Ah Battery* DD524BP30

DD525ROTARY HAMMERDrilling RangeDrill diameter in concrete 5 - 20 mmDrill diameter in steel up to 13 mmDrill diameter in wood 30 mmOptimum drilling (concrete) 5 - 10 mmQuick change chuck

DYNADRILL™ ROTARY HAMMERS AND ROTARY COMBI-HAMMERS

DD530ROTARY HAMMERDrilling RangeDrill diameter in concrete 5 - 26 mmDrill diameter in steel up to 13 mmDrill diameter in wood 30 mmCore cutting 80 mmOptimum drilling (concrete) 10 - 18 mm

DD542ROTARY HAMMERDrilling RangeDrill diameter in concrete 5 - 26 mmDrill diameter in steel up to 13 mmDrill diameter in wood 30 mmCore cutting 90 mmOptimum drilling (concrete) 12 - 20 mmQuick change chuck


35

3

DYNADRILL™ ACCESSORIESDescription Order No.

Drill Chuck Adaptor 342, 521, 525, 530, 540, 524 (to suit 63 Series and R Series machines) DAR3DHDrill Chuck 12mm (1/2” ) DAADCK12Carbide Bit Adaptor 375 to SDS Max DASM37Carbide Bit Adaptor 342 to 63 & R3 Series DA64R3Adaptor SDS Max to R3 DASMR3Quick Change Keyless Chuck complete 540, 542 DAKC4Quick Change Keyless Chuck complete 521, 525, 524 DAKC2

CARBIDE DRILL BITS~ New head design and 4 fold spiral provide high performance and long life.

do Diameter wL Work Length L Total Length For use in Order No.DD521 DD524 DD525 DD530 DD542

1/4” 50 110 ✓ ✓ ✓ DDR306050X31/4” 100 160 ✓ ✓ ✓ DDR306100X31/4” 150 210 ✓ ✓ ✓ DDR306150X31/2” 125 185 ✓ ✓ ✓ ✓ ✓ DDR312125X75 50 110 ✓ ✓ ✓ DDR3050505 100 160 ✓ ✓ ✓ DDR3051005.5 65 125 ✓ ✓ ✓ DDR305065X55.5 125 185 ✓ ✓ ✓ DDR305125X56 50 110 ✓ ✓ ✓ DDR3060506 100 160 ✓ ✓ ✓ DDR3061006 150 210 ✓ ✓ ✓ DDR3061507 65 125 ✓ ✓ ✓ DDR3070658 65 125 ✓ ✓ ✓ ✓ ✓ DDR3080658 150 210 ✓ ✓ ✓ ✓ ✓ DDR30815010 100 160 ✓ ✓ ✓ ✓ ✓ DDR31010010 180 240 ✓ ✓ ✓ ✓ ✓ DDR31018010 400 460 ✓ ✓ ✓ ✓ ✓ DDR31040012 125 185 ✓ ✓ ✓ ✓ ✓ DDR31212512 250 310 ✓ ✓ ✓ ✓ ✓ DDR31225012 400 460 ✓ ✓ ✓ ✓ ✓ DDR31240013 215 275 ✓ ✓ ✓ ✓ ✓ DDR31321514 200 260 ✓ ✓ ✓ ✓ ✓ DDR31420015 150 210 ✓ ✓ ✓ ✓ ✓ DDR31515016 125 185 ✓ ✓ ✓ ✓ ✓ DDR31612516 200 260 ✓ ✓ ✓ ✓ ✓ DDR31620016 400 460 ✓ ✓ ✓ ✓ ✓ DDR316400

CARBIDE QUATRO HEAD DRILL BITS~ Aggressive 4-edged drill head with x-shaped carbide.~ Provides extra long life, higher performance, exact hole size

and smooth running.

do Diameter wL Work Length L Total Length For use in Order No.DD521 DD524 DD525 DD530 DD542

16 200 250 ✓ ✓ ✓ ✓ ✓ DQR31620016 400 450 ✓ ✓ ✓ ✓ ✓ DQR31640018 200 250 ✓ ✓ ✓ ✓ DQR31820018 400 450 ✓ ✓ ✓ ✓ DQR31840019 250 300 ✓ ✓ ✓ ✓ DQR31925020 200 250 ✓ ✓ ✓ ✓ DQR32020020 400 450 ✓ ✓ ✓ ✓ DQR32040022 200 250 ✓ ✓ DQR32220022 400 450 ✓ ✓ DQR32240024 200 250 ✓ ✓ DQR32420024 400 450 ✓ ✓ DQR32440025 400 450 ✓ ✓ DQR32540026 200 250 ✓ ✓ DQR32620026 400 450 ✓ ✓ DQR326400



36

3


DD575ROTARY COMBI-HAMMERChisel RangePoint –Flat 25 mmSpade 50 - 115 mm

DD605DEMOLITION HAMMERChisel RangePoint –Flat 25 mmSpade 50 - 115 mmRemoval rate 145 kg/h

DD610DEMOLITION HAMMERChisel RangePoint –Flat 25 mmSpade 50 - 115 mmRemoval rate 460 kg/h

DD560ROTARY COMBI-HAMMERChisel RangePoint –Flat 25 mmSpade 50 - 115 mm

DYNADRILL™ ROTARY COMBI-HAMMERS AND DEMOLITION HAMMERS



37

3

SDS-MAX DRILL BITS~ For use in DD560 and DD575 and all other SDS Max hammers.

do Diameter wL Work Length L Total Length For use in Order No.DD560 DD575

12 200 340 ✓ ✓ DDSM1220012 400 540 ✓ ✓ DDSM1240014 200 340 ✓ ✓ DDSM1420014 400 540 ✓ ✓ DDSM1440016 200 340 ✓ ✓ DYSM1620016 400 540 ✓ ✓ DYSM1640018 200 340 ✓ ✓ DYSM1820018 400 540 ✓ ✓ DYSM1840019 195 350 ✓ ✓ DYSM1919520 200 320 ✓ ✓ DYSM2020020 400 520 ✓ ✓ DYSM2040020 800 920 ✓ ✓ DYSM2080022 200 320 ✓ ✓ DYSM2220022 400 520 ✓ ✓ DYSM2240024 200 320 ✓ ✓ DYSM2420024 400 520 ✓ ✓ DYSM2440025 200 320 ✓ ✓ DYSM2520025 400 520 ✓ ✓ DYSM2540025 800 920 ✓ ✓ DYSM2580026 250 370 ✓ ✓ DYSM2625026 400 520 ✓ ✓ DYSM2640028 250 370 ✓ ✓ DYSM2825028 400 570 ✓ ✓ DYSM2845028 550 670 ✓ ✓ DYSM2855030 250 370 ✓ ✓ DYSM3025030 450 570 ✓ ✓ DYSM3045032 250 370 ✓ ✓ DYSM3225032 450 570 ✓ ✓ DYSM3245035 250 370 ✓ ✓ DYSM3525035 450 570 ✓ ✓ DYSM3545035 550 670 ✓ ✓ DYSM3555038 450 570 ✓ ✓ DYSM3845040 450 570 ✓ ✓ DYSM40450

CORE BIT RATIO SYSTEM~ An adaptable core drilling system to suit

all machines

d Diameter Description For use in Order No.DD521 DD525 DD530 DD542 DD560 DD575

40 Core Bit ✓ ✓ ✓ ✓ ✓ ✓ DCHR04050 Core Bit ✓ ✓ ✓ ✓ DCHR05065 Core Bit ✓ ✓ ✓ ✓ DCHR06580 Core Bit ✓ ✓ ✓ ✓ DCHR08090 Core Bit ✓ ✓ DCHR090100 Core Bit ✓ ✓ DCHR100- Extension DAHR25280- R3 Series Adaptor DAR3HR- SDS Max Adaptor DASMHR


38

3

Power Tools and AccessoriesCHISELS~ Ramset Demolition Chisels designed

for Ramset Dynadrill Combi-HammersandDemolition Hammers and provide long life.

L Total Cw Chisel Type For use in Order No. Order No. PackLength Width DD525 DD542 DD560 DD575 DD605 DD610 R Drive SDS-Max Quantity

250 - Point ✓ ✓ DHR3PCS - 1280 - Point ✓ ✓ ✓ ✓ - DHSMPCS 1400 - Point ✓ ✓ ✓ ✓ - DHSMPCM 1600 - Point ✓ ✓ ✓ ✓ - DHSMPCL 1250 25 Flat ✓ ✓ DHR3FCS - 1280 25 Flat ✓ ✓ ✓ ✓ - DHSMFCS 1400 25 Flat ✓ ✓ ✓ ✓ - DHSMFCM 1600 25 Flat ✓ ✓ ✓ ✓ - DHSMFCL 1250 35 Spade ✓ ✓ DHR3SC040 - 1300 80 Spade ✓ ✓ ✓ ✓ - DHSMSC080 1300 115 Spade DHSMSC115 - 1400 50 Spade ✓ ✓ ✓ ✓ - DHSMSC050 1

Sharpening ChiselsSince the best results can only be achieved with sharp chisels,sharpen the tool regularly.

RESHARPENING THE CHISELLING TOOLSSharpen chiselling tools using grinding wheels (eg. special fusedalumina) with a steady supply of water. Recommended values for thispurpose are contained in Fig. A. Take care that no annealingcolouration appears on the cutting edges, otherwise the hardness ofthe chiselling tools will be compromised.

FORGING AND HARDENING Forging: Heat the chisel to between 850° C and 1050° C (bright red to

yellow) and forge.Hardening: Heat the chisel to 900° C (bright red) and quench in oil, then

temper in an oven for approx. one hour at 320° C (annealingcolour = light blue). Fig. A


39

3

Grinding Power Tools and Accessories

DEPRESSED CENTRE WHEELS

D ø (mm) D ø (Imperial) RPM Order No. Packx x Metal QuantityW Width (mm) W Width (Imperial)x xB Bore (mm) B Bore (Imperial)

102 x 5 x 16 4” x 3/16” x 5/8” 15280 GA102SG16T 10102 x 6 x 16 4” x 1/4” x 5/8” 15280 GA102SG16 10115 x 6 x 22.2 4 1/2” x 1/4” x 7/8” 13000 GA115SGU7 10115 x 6 x 22.2 5” x 1/4” x 7/8” 12000 GA127SGU7 10356 x 6 x 22.2 9” x 1/4” x 7/8” 6800 GA230SGU7 10

CUTOFF AND DEPRESSED CENTRE WHEELSCUTOFF CENTRE WHEELS~ Manufactured to highest safety standards.~ Tough efficient and reliable.~ For use with Angle Grinders, Circular Saws and

low speed portable Chop Saws.~ Pack quantity: 10

D ø (mm) D ø (Imperial) RPM Order No. Order No. Packx x Masonry Metal QuantityB Bore (mm) B Bore (Imperial)

102 x 16 4” x 5/8” 15280 GA102MC16 GA102SC16 10115 x 22.2 4 1/2” x 7/8” 13000 GA115MCU7 GA115SCU7 10127 x 22.2 5” x 7/8” 12000 – GA127SCU7 10178 x 22.2 7” x 7/8” 8600 – GA178SCU7 10230 x 22.2 9” x 7/8” 6800 GA230MCU7 GA230SCU7 10230 x 25.4 9” x 1” 6800 GA230MCU8 – 10230 x 22.2 9” x 7/8” 6800 – GA230RCU7* 10230 x 25 - 6800 – GA230SC25 10305 x 22.2 12” x 7/8” 6200 GA305MCU7 – 10305 x 25 - 6200 GA305MC25 GA305SC25 10356 x 25 - 4200 GA356MC25 GA356SC25 10

* Sheet Metal

GR115SANGLE GRINDER

GR230DANGLE GRINDER

INDUSTRIAL ANGLE GRINDERS


41

4

Sealants

Blazebrake™ 201 Fire Sealant 42-43Ductseal (WB) 42-43Dynaseal™ Sealant 42-43Gap Seal 42-43Glass Seal 42-43Hiseal™ Sealant 42-43Hiseal™ TG Sealant 42-43Joint Seal 42-43Performance 42-43Roof Seal 42-43Water Seal 42-43

Sealant Accessories

Primers for Polyurethane Sealants 43Polyurethane Foam Backer Rod 42Barrel Gun, Caulking Guns & Accessories 42

Adhesives

Flexifix 43Nailfree 43Safe-T-Bond™ Adhesive 43

Foams

Ramset Fomofill™ Expanding Foam 44Fomoplus 44Handi Foam 44

Coatings

Dynashield 44Glazecoat 44Rainaway 44Sealcoat 44

Concrete Repair & Grouting Compounds

Concremate 45Epoxy Grout 45Epoxy Paste 45Epoxy Putty 45Epoxypatch 45Fillers 45Grouts (Class A) 45

Concrete & Mortar Additives

Cemcrete 46Pluscrete 46Concrebond 46

Accessories

Solvent 46Mixing Paddles 46

4 Construction Chemicals


42

4

Construction Chemicals

GLASS SEAL~ Flexible glass and window silicone sealant.~ General glazing.~ Carton quantity: 12

PERFORMANCE~ A multipurpose elastomeric, flexible

non silicon sealant.~ Transparent and paintable for external use.~ Carton quantity: 20

ROOF SEAL~ High performance superior UV light resistant,

silicone sealant.~ Neutral cure.~ Seals coated steel guttering, down pipes

and roofing.~ Carton quantity: 12

SEALANTS

GAP SEAL~ A non slump flexible acrylic sealant.~ Seals around ceramic tiles.~ Interior crack filling prior to painting.~ Carton quantity: 12

DYNASEAL™ SEALANT~ An acrylic/urethane copolymer flexible

joint sealant.~ Interior and protected exterior expansion

and construction joints.~ Carton quantity: 20

HISEAL™ SEALANT~ High performance single component

polyurethane sealant.~ Seals exterior construction & expansion joints.~ Carton quantity 375 g: 25

720 g: 20

DUCTSEAL (WB)~ A flexible sealant for metal ductwork and

metal lap joints.~ Paintable general purpose adhesive sealant.~ Carton quantity: 25

WATER SEAL~ A construction grade, high performance,

mould resistant silicone sealant.~ Around baths and basins.~ Tile joints.~ Carton quantity: 12

JOINT SEAL~ A high performance, high joint movement,

silicone sealant.~ Brickwork and blockwork.~ Neutral cure.~ Carton quantity: 12

HISEAL™ TG SEALANT~ High performance two component

polyurethane sealant.~ Traffic grade sealant for joints in floors.~ Carton quantity: 1

BLAZEBRAKE™ 201 FIRE SEALANT~ Fire rated construction sealant.~ Fire rated up to 4 hours to AS1530.4 and

AS4072.1.~ Carton quantity 480 g: 20

960 g: 15

PRIMERS FOR POLYURETHANE SEALANTS~ A one component primer.~ Metal construction joints.~ Carton quantity: 1

POLYURETHANE FOAM BACKER ROD~ A closed cell polyethylene foam.~ Expansion joint between building materials.~ Carton quantity ≤10 mm: 250

13 mm: 15015 mm: 10020 mm: 60≥ 25 mm: 2

BARREL GUN, CAULKING GUNS AND ACCESSORIES~ Carton quantity: 1


Caulking Gun for 850ml Cartridge CAGU850Caulking Gun for 300ml Cartridge CAGU30037cm Barrel Gun for Sachet/Cartridges SABGU3737cm Barrel Gun for Bulk Materials BKBGU37Nozzle Set BGUNS250 to 220mm Threaded Follower Plate FWPT6L



43

4

NAILFREE~ Bonds floorboards and wallboards to joists

and studs.~ A general purpose construction adhesive.~ Carton quantity: 10

SAFE-T-BOND™ ADHESIVE~ Bonds chipboard, plywood, masonite and

hardiflex sheeting to joists.~ Water based acrylic timber floor adhesive.~ Carton quantity: 10

FLEXIFIX~ Flexible waterproof tile adhesive.~ Two component, latex based adhesive.~ Carton quantity: 1

Adhesive Colour Order No.320 g 930 g 1.5 kg 4 L 20L

Nailfree Straw NFCAG320 NFCAG930 – – –Safe-T-Bond White – – STBDL1 – –Flexifix Brown – – – FLFXL4 FLFXL20

Sealant Colour Order No.Cartridge 300 mL Sachet 500 mL Sausage 600 mL Pail 6 L

Glass Seal Clear GLSLCLG300 – – –Performance Clear PERFCLG310 – –Roof Seal Translucent RFSLTRG300 – – –

Aluminium RFSLALG300 – – –Grey RFSLGYG410 – – –Off White RFSLFWH410 – – –

Ductseal (WB) Grey DSLWG450 – – –Water Seal White WRSLWHG300 – – –

Translucent WRSLTRG300 – – –Joint Seal Grey JTSLGYG410 – – –

Translucent JTSLTRG300 – – –Gap Seal White GPSLWHG450 – – –Dynaseal™ Sealant Grey DYSLGRG450 DYSLGYG750 – –

White DYSLWHG450 – – –Hiseal™ Sealant Grey HYSLGYG375 – HYSLGYG720 –

White HYSLWHG375 – HYSLWHG720 –Hiseal™ TG Sealant Grey – – – HYTGGYL6Blazebrake™ 201Fire Sealant Grey BLBRGYC – BLBRGYS –Primers for 250 mL 1 LPolyurethane Sealants Yellow – PRPUM250 – PRPUL1

Sealant Colour Order No.6 mm 8 mm 10 mm 13 mm 15 mm 20 mm 25 mm 30 mm 40 mm

Polyurethane FoamBacker Rod White BRPE06 BRPE08 BRPE10 BRPE13 BRPE15 BRPE20 BRPE25 BRPE30 BRPE40

ADHESIVES

SEALANTS cont.



44

4COATINGS

SEALCOAT~ A two part, water based epoxy water proof

membrane.~ Water containment structures.~ Carton quantity: 1

GLAZECOAT~ An acrylic, surface sealer and coating for

concrete and masonry.~ Protects against staining.~ Suppresses dust.~ Carton quantity: 1

RAINAWAY~ A concrete and masonry water absorption

repellent.~ Prevents water absorbtion into concrete and

block walls.~ Carton quantity: 1

DYNASHIELD™ PROTECTIVE COATING~ A masonry and concrete acrylic protective

and anti graffiti coating.~ Carton quantity: 1

Coating Colour Order No.4 L 8 L 20L

Sealcoat White SLCTWHL4 SLCTWHL8 SLCTWHL20Grey SLCTGYL4 SLCTGYL8 SLCTGYL20

Glazecoat Clear GLCTCLL4 – GLCTCLL20Rainaway Clear RNWYCLL4 – RNWYCLL20Dynashield™ Coating White DYSHCLL4 – DYSHCLL20

Foam Colour Order No.500 ml 500 g 750 g 6.8 kg Kit 18.6 kg Kit 40.0 kg Kit

Fomofill Off White – FMFLG500 FMFLG750 – – –Fomoplus – – – FMPLG750 – – –Solvent – FMSVM500 – – – – –Handi Foam Off White – – – HDFM105 HDFM205 HDFM605

FOAMS

RAMSET FOMOFILL™ EXPANDING FOAM~ Filling large holes.~ Seals, fills, insulates.~ Carton quantity 500 g: 6

750 g: 12

FOMOPLUS~ Easy no mess applicator.~ Seals, fills, insulates.~ Dispensed using applicator gun FMPLGU.~ Carton quantity Fomoplus/Solvent: 12

HANDI FOAM~ Expanding fast cure, two part polyurethane

construction foam.~ Fills cavities and holes.~ Seals, fills, insulates.~ Uses nozzles HDFMN8C and HDFMN50C.~ Carton quantity: 1



45

4

CONCRETE REPAIR AND GROUTING COMPOUNDS

EPOXY PASTE~ A non sag, epoxy based, adhesive paste.~ Fill and repair holes and broken concrete.~ Manhole repairs.~ Carton quantity: 1

EPOXY PUTTY~ A non sag trowellable epoxy based

adhesive paste.~ High build.~ For general purpose repair to concrete.~ Carton quantity: 1

EPOXYPATCH~ Two part epoxy resin binder system.~ Add fillers to create mortars.~ Grouting.~ Repair broken concrete.~ Carton quantity: 1

EPOXY GROUT~ High performance pourable epoxy.~ Suitable for use on damp substrate.~ Mix with fillers to create high strength grout.~ Carton quantity: 1

CONCREMATE~ A quick setting, super strength, shrinkage

compensated cement for patching, repairingand anchoring.

~ Carton quantity 500 g: 121 kg: 64 kg, 10 kg & 25 kg: 1

GROUTS (CLASS A)~ High performance, cementitious grout.~ Class A, non shrink.~ Carton quantity: 1

FILLERS~ A inorganic pre blended mineral filler.~ Use for mixing with epoxy resin binders to

produce mortars of various consistencies.~ Carton quantity: 1

Concrete Repair & Colour Order No.Grouting Compounds 1 L 2 L 3 L 4 L 8 L 15 L 20 L

Epoxy Paste Grey – – EPPSL3 – – EPPSL15 –Epoxy Putty Grey EPPYL1 EPPYL2 – EPPYL4 EPPYL8 – EPPYL20Epoxypatch Clear EPPHL1 – EPPHL3 – – – EPPHL20

Concrete Repair & Colour Order No.Grouting Compounds 2 L 4 L 16 L 500 g 1 kg 4 kg 10 kg 20 kg 25 kg

Fillers Beige – – – – – – – RFLFG –– – – – – – – RFLCG –

Concremate Grey – – – 830050 830074 830098 830104 – 830111Grouts (Class A) Grey – – – – – – – RPGMP –Epoxy Grout Grey EPGRL2 EPGRL4 EPGRL16 – – – – – –



46

4

SOLVENT~ A general purpose hydrocarbon based

solvent and thinner.~ Cleans tools and equipment.~ Carton quantity: 4

Colour Pack Size Pack Type Order No.

Clear 4 litre Tin SVGPL4

MIXING PADDLES~ Suitable for use with hand or bench mounted

mixers and they are manufactured from zincplated steel.

~ Carton quantity: 1


Small Spiral SSMPLarge Spiral LSMP

ACCESSORIES

CONCRETE AND MORTAR ADDITIVES

CEMCRETE~ Resin based cement additive.~ Bonds new to old concrete.~ Improves strength of mortar.~ Carton quantity 5 Litre: 4

20 Litre: 1

PLUSCRETE~ A synthetic rubber cement mortar additive.~ Improves mortars to provide water proof

repairs, renders and topping.~ Carton quantity: 1

CONCREBOND~ Acrylic cement mortar additive.~ Improves strength and water resistance of

concrete and mortars.~ Carton quantity ≤ 1 Litre: 10

2 Litre: 65 Litre: 420 Litre: 1

Concrete and Colour Order No.Mortar Additive 250 ml 500 ml 1 L 2 L 5 L 20 L

Cemcrete White – – – – CMCRL5 CMCRL20Pluscrete White – – – – – PSCRL20Concrebond Clear CNBDM250 CNBDM500 CNBDL1 CNBDL2 CNBDL5 CNBDL20


Self Drilling Treated Pine Screws

Countersunk Self Embedding Head Coarse Thread 52

Self Drilling Timber Screws

Type 17 Bugle Head Batten Coarse Thread 53Type 17 Coarse Thread 53Type 17 Hex Washer Head Coarse Thread 54Standard Woodscrew Countersunk HeadCoarse Thread 54

Self Drilling Metal Screws

Countersunk Head Drill Point 55Countersunk Self Embedding Head Winged Drill Point 55Countersunk Head Extended Drill Point 55Pan & Wafer Head 56Large Wafer (Truss) Head Drill Point 56Hex Washer Head Drill Point 57Hex Washer Head Series 5 Extended Drill Point 57

Self Drilling Roof & Wall Screws - Timber

Type 17 Hex Washer Head with Seal 58

Self Drilling Roof & Wall Screws - Metal

Hex Washer Head with Seal Drill Point 59Hex Washer Head Series 5 Extended Drill Point with Seal 60

Self Drilling Screws Cyclone Assemblies

Type 17 & Drill Point Hex Washer Head with Cyclone Assemblies - Timber & Metal 60

Cyclone Assembly Accessories

Cyclone Assembly Accessories 60

Self Drilling Stitching Screws

Needle Point 61

Self Tapping Screws

Countersunk Head Self Tapping Screws 61Undercut Self Tapping Screws Zinc Plates 62Pan Head Self Tapping Screws 62

Boustead™ Rivets

Aluminium/Steel/Monel Rivets 63Multi Grip/Snap Head Rivets 63Hand Riveting Tool 63

47

5

Ramset Screwdrivers

SD2000 48SD4000 48SDB12 48

Drivers & Accessories

Screwdriver Bits 48

Boustead™ Screws

Self Drilling Plasterboard Screws

Bugle Head Needle Point Twinfast Thread 49Bugle Head Needle Point Coarse Thread 49Bugle Head Drill Point 49

Self Drilling Cement Sheet Screws

Countersunk Self Embedding HeadNeedle Point Twinfast Thread 50Countersunk Self Embedding Winged Drill Point 50Type 17 Countersunk Self Embedding HeadCoarse Thread 50Flower Self Embedding Head Drill Point 50

Self Drilling Chipboard Screws

Countersunk Self Embedding Head Coarse Thread 51Supa-Chip Countersunk Head Coarse Thread 51

Plastic Push On Caps

Plastic Push On Caps 51

Self Drilling Cabinet Screws

Large Wafer (Truss Head) Needle PointTwinfast Thread 52

5 Metal and Timber Fastening


Metal and Timber Fastening

48

5

SDB12BATTERY OPERATED SCREWDRIVERCapacitySelf drilling screws up to 10 gaugeNeedle point screws up to 8 gauge


1.7 Ah Battery PTUB17Charger (12 min.) UBC4814Charger (60 min.) UBC7224Tool Case B2605438374Light B2609200171

SD2000SINGLE SPEED ROTARY DRILLCapacityScrews up to 14 gauge

SD4000SCREWDRIVERCapacityScrews up to 10 gauge

RAMSET™ SCREWDRIVERS

DRIVERS & ACCESSORIESSCREWDRIVER BITS

Driver Type Order No. Packx Quantityl Driver Length

#2 PH x 25mm HDPH02025 10#2 PH x 50mm HDPH02050 10#2 PH x 100mm HDPH02100 10#2 PH x 150mm HDPH02150 10#2 PH x 45mm Doubled End HDPH02045DE 10#2 PH x 65mm Doubled End HDPH02065DE 10

5 x 32mm Internal Hex Drive HDHX05032 10T25 x 25mm Tamperproof Torx® Drive HDTT25025 10

Screwdriver Insert Bits Merchandiser XMR110 11/4” x 45mm Hex Drive Magnetic Nutsetter 6g & 8g HDUN04045 101/4” x 65mm Hex Drive Magnetic Nutsetter 6g & 8g HDUN04065 10

5/16” x 45mm Hex Drive Magnetic Nutsetter 10g & 12g HDUN05050 105/16” x 65mm Hex Drive Magnetic Nutsetter 10g & 12g HDUN05065 105/16” x 81mm Hex Drive Magnetic Nutsetter 10g & 12g HDUN05081 103/8” x 45mm Hex Drive Magnetic Nutsetter 14g HDUN06045 103/8” x 65mm Hex Drive Magnetic Nutsetter 14g HDUN06065 10

Ceiling Hanger Driver SETES 10Note: PH = Phillips Head Driver. PZ = Pozi® Head Driver.

Single Ended Bit

Double Ended Bit

Internal Hex Bit

Tamperproof Torx® Drive

Hex Drive Magnetic Nutsetter

Hex Drive Magnetic Nutsetter

Ceiling Driver



49

5

BOUSTEAD™ SELF DRILLING PLASTERBOARD SCREWSBUGLE HEAD NEEDLE POINT TWINFAST THREAD~ Yellow Zinc finish.~ For fixing plasterboard to timber or

light gauge steel framing.

d Gauge L Screw t Maximum f1 Maximum f2 Maximum Order No. Bag Order No. BoxLength Metal Capacity Fixing Capacity Fixing Quantity Quantity

Thickness to Timber to Steel

6 20 0.75 5 14 468031 100 SN06020YBT 100025 0.75 10 19 468048 100 SN06025YBT 100030 0.75 15 24 468055 100 SN06030YBT 100035 0.75 20 29 - - SN06035YBT 100041 0.75 26 35 468062 100 SN06041YBT 500

7 45 0.75 30 39 - - SN07045YBT 50051 0.75 36 45 468130 100 SN07051YBT 50057 0.75 42 51 468147 75 SN07057YBT 500

8 65 0.75 50 59 - - SN08065YBT 25075 0.75 60 69 - - SN08075YBT 250

10 100 0.75 85 94 - - SN10100YBT 250

~ Collated.

d Gauge Finish Point Style L Screw t Maximum f1 Maximum f2 Maximum Order No. BoxLength Metal Capacity Fixing Capacity Fixing Quantity


6 Yellow Zinc Needle 25 0.75 10 19 SN06025YBTC 1000Blk Phosphate Needle 25 0.75 10 19 SN06025PBT 1000

6 - 20 Yellow Zinc Drill 25 2.8 - 19 SD06025YBBC 1000

BUGLE HEAD NEEDLE POINT COARSE THREAD~ Yellow Zinc finish.~ For fixing plasterboard to timber or

light gauge steel framing.



7 20 0.75 5 12 - - SN07020YBF 100025 0.75 10 17 468109 100 SN07025YBF 100028 0.75 13 20 - - SN07028YBF 100030 0.75 15 22 468116 100 SN07030YBF 100035 0.75 30 27 - - SN07035YBF 100041 0.75 26 33 - - SN07041YBF 500

8 45 0.75 30 37 468161 100 SN08045YBF 50050 0.75 35 42 468178 100 SN08050YBF 50057 0.75 42 49 - - SN08057YBF 50075 0.75 60 67 - - SN08075YBF 250

10 38 0.75 23 28 - - SN10038YBF* 500* Laminating screw for fire rated walls.

BUGLE HEAD DRILL POINT~ Yellow Zinc finish.~ For fixing plasterboard to metal framing.

d Gauge L Screw t Maximum f1 Maximum f2 Maximum Order No. Bag Order No. Box- Pitch Length Metal Capacity Fixing Capacity Fixing Quantity Quantity


6 - 20 25 2.8 - 14 467980 100 SD06025YBB 100030 2.8 - 19 - - SD06030YBB 100040 2.8 - 29 - - SD06040YBB 100045 2.8 - 34 467997 100 SD06045YBB 1000


Metal and Timber FasteningBOUSTEAD™ SELF DRILLING CEMENT SHEET SCREWSCOUNTERSUNK SELF EMBEDDING HEAD NEEDLE POINT TWINFAST THREAD~ Yellow Zinc finish.~ For fixing cement sheet to thin gauge metal or timber.



8 20 0.75 5 14 - - SN08020YST 100030 0.75 15 24 308809 100 SN08030YST 1000

COUNTERSUNK SELF EMBEDDING WINGED DRILL POINT~ XP3™ AS3566 Class 3 finish.~ For fixing cement sheet to steel framing.



8 - 18 22 3.6 - 8 - - SD08022MSBW 100032 3.6 - 18 - - SD08032MSBW 100040 3.6 - 26 - - SD08040MSBW 1000

TYPE 17 COUNTERSUNK SELF EMBEDDING HEAD COARSE THREAD~ Yellow Zinc finish.~ For fixing timber to timber or cement sheet to timber.~ Internal applications.

d Gauge L Screw f1 Maximum Order No. Bag Order No. Box- Pitch Length Capacity Fixing Quantity Quantity

to Timber

8 - 15 30 15 468635 100 ST08030YSA 1000

FLOWER SELF EMBEDDING HEAD DRILL POINT~ Yellow Zinc finish.~ For fixing chipboard and cement sheet to metal.



8 - 18 20 3.6 - 9 - - QD08020Y9B 100030 3.6 - 19 - - QD08030Y9B 100035 3.6 - 24 - - QD08035Y9BW 500

50

5



51

5

BOUSTEAD™ SELF DRILLING CHIPBOARD SCREWSCOUNTERSUNK SELF EMBEDDING HEAD COARSE THREAD~ Yellow Zinc finish.~ For fixing chipboard to chipboard and chipboard to timber.

d Gauge L Screw f1 Maximum Order No. Bag Order No. BoxLength Capacity Fixing Quantity Quantity

to Timber

8 20 2 468680 100 SC08020YSF 100022 4 - - SC08022YSF 100025 7 468697 100 SC08025YSF 100028 10 - - SC08028YSF 100032 14 468703 100 SC08032YSF 100035 17 468710 100 SC08035YSF 100038 20 300605 100 SC08038YSF 100041 23 468727 100 SC08041YSF 50045 27 468734 100 SC08045YSF 50051 33 468741 100 SC08051YSF 50057 39 468758 50 SC08057YSF 500

10 65 47 468802 50 SC10065YSF 25075 57 468819 50 SC10075YSF 250

SUPA-CHIP COUNTERSUNK HEAD COARSE THREAD~ Yellow Zinc finish.~ Pozi Drive heads .~ For general purpose soft timber fixing,

where coloured plastic cap is required.

10 20 2 - - SC10020YFAA 100025 7 - - SC10025YFAA 100030 12 - - SC10030YFAA 100035 17 - - SC10035YFAA 100040 22 - - SC10040YFAA 50050 32 - - SC10050YFAA 50060 42 - - SC10060YFAA 50070 52 - - SC10070YFAA 500

PLASTIC PUSH ON CAPSCOLOURED PLASTIC PUSH ON CAPS~ To fit into the recess in screws.~ To hide the screw head for a professional finish.

Colour Order No. Suits Box Order No. Box#PH Head Screws Quantity Suits Supa-Chip Quantity

White SACPRFW 1000 SACSWH 1000

Suits #2 PH Head Screws

* Plastic cover not included.

Suits Supa-Chip


Metal and Timber FasteningBOUSTEAD™ SELF DRILLING CABINET SCREWSLARGE WAFER (TRUSS HEAD) NEEDLE POINT TWINFAST THREAD~ Yellow Zinc finish.~ Chipboard, timber, or insulation foil fixing to timber.


to Timber

8 - 15 12 1 - - SN08012YLT 100016 3 930109 100 SN08016YLT 100020 6 468932 100 SN08020YLT 100025 10 468949 100 SN08025YLT 100032 16 473141 100 SN08032YLT 100040 20 473158 100 SN08040YLT 1000

BOUSTEAD™ SELF DRILLING TREATED PINE SCREWSCOUNTERSUNK SELF EMBEDDING HEAD COARSE THREAD FOR TREATED PINE~ Mechanically plated for treated timber finish.~ For fixing to CCA and chemically treated timber.

d Gauge L Screw f1 Maximum Order No. Bag Order No. BoxLength Capacity Fixing Quantity Quantity

to Timber

8 25 5 468826 100 SC08025GSF 100032 8 - - SC08032GSF 100035 12 - - SC08035GSF 100041 18 468840 100 SC08041GSF 50045 20 468857 100 SC08045GSF 50051 25 468864 100 SC08051GSF 50057 28 - - SC08057GSF 50065 35 468871 50 SC08065GSF 500

10 65 35 - - SC10065GSF 25075 40 012965 50 SC10075GSF 250100 55 468888 50 SC10100GSF 250

52

5



53

5

BOUSTEAD™ SELF DRILLING TIMBER SCREWSTYPE 17 BUGLE HEAD BATTEN COARSE THREAD~ Yellow Zinc finish.~ For securing timber batten to timber roof beams (kiln dried timber).

d Gauge L Screw Material f1 Maximum Order No. Bag Order No. Box- Pitch Length Capacity Fixing Quantity Quantity

to Timber

14 - 10 50 - 20 468550 25 ST14050YBAH 50075 - 45 468567 25 ST14075YBAH 500100 - 50 468574 25 ST14100YBAH 500

~ XP3™ AS3566 Class 3 finish.~ For securing timber batten to timber roof beams

(Treated Pine or green sawn timber).

14 - 10 50 - 20 - - ST14050GBA 100075 - 45 - - ST14075GBA 500100 - 50 013009 25 ST14100GBA 500

~ 304 Stainless Steel material finish.~ Securing timber battens to timber roof beams (Treated Pine)

in marine environments.

14 - 10 75 304 S/S 45 - - ST14075SBAH 500100 304 S/S 50 - - ST14100SBAH 500

TYPE 17 COARSE THREAD~ For fixing timber to timber and pre drilled

metal to timber.

d Gauge Head Style Finish L Screw f1 Maximum Order No. Bag Order No. Box- Pitch Length Capacity Fixing Quantity Quantity

to Timber

6 - 18 Countersunk Yellow Zinc 25 10 468499 100 ST06025YFA 10008 - 15 Countersunk Yellow Zinc 20 5 468505 100 ST08020YFA 1000

Pan Yellow Zinc 20 8 - - ST08020YPA 1000Countersunk Yellow Zinc 25 10 468512 100 ST08025YFA 1000Pan Yellow Zinc 25 12 468406 100 ST08025YPA 1000Countersunk Yellow Zinc 30 15 - - ST08030YFA 1000

10 - 12 Mushroom Yellow Zinc 20 5 - - ST10020YLAT 1000Wafer Yellow Zinc 25 5 468581 100 ST10025YWA 1000Wafer XP3™ AS3566 Class 3 25 5 - - ST10025MWA 1000Mushroom Yellow Zinc 25 10 - - ST10025YLAT 1000Countersunk Yellow Zinc 30 15 468529 100 ST10030YFA 1000Wafer Yellow Zinc 35 15 468598 75 ST10035YWA 1000Countersunk Yellow Zinc 40 20 468536 75 ST10040YFA 500Mushroom Yellow Zinc 40 20 - - ST10040YLAT 1000Wafer Yellow Zinc 45 25 473134 75 ST10045YWA 500Countersunk Yellow Zinc 50 25 468543 50 ST10050YFA 500Countersunk Yellow Zinc 60 30 - - ST10060YFA 500Countersunk Yellow Zinc 75 35 - - ST10075YFA 500

Countersunk Head

Pan Head

Wafer Head

(Tamper Resistant) Mushroom Head


Metal and Timber FasteningTYPE 17 HEX WASHER HEAD COARSE THREAD~ Yellow Zinc finish.~ For fixing timber to timber or pre drilled metal to timber.~ Internal applications.


to Timber

10 - 12 20 5 - - ST10020YHA 100025 5 468413 75 ST10025YHA 1000

12 - 11 25 5 - - ST12025YHA 100030 10 - - ST12030YHA 100045 15 - - ST12045YHA 100050 20 468444 50 ST12050YHA 100065 35 468468 40 ST12065YHA 1000

14 - 10 25 5 - - ST14025YHA 10005 45 - - ST14075YHA 100090 60 - - ST14090YHA 1000

~ XP3™ AS3566 Class 3 finish.~ For fixing timber to timber or pre drilled metal to timber in

external applications.

10 - 12 20 5 - - ST10020MHA 100025 5 468208 50 ST10025MHA 1000

12 - 11 25 5 - - ST12025MHA 100040 10 - - ST12040MHAF* 100045 15 468215 50 ST12045MHA 100050 20 468222 50 ST12050MHA 100065 35 468239 40 ST12065MHA 1000

14 - 10 25 5 - - ST14025MHA 100050 20 468253 50 ST14050MHA 100065 35 468260 25 ST14065MHA 100075 45 468277 25 ST14075MHA 50090 60 468284 25 ST14090MHA 500100 70 468291 25 ST14100MHA 500115 85 - - ST14115MHA 500150 120 - - ST14150MHA 500

* Fully threaded.

STANDARD WOODSCREW COUNTERSUNK HEAD COARSE THREAD~ Stainless Steel and Brass material finishes.~ For holding sanitary appliances to timber flooring.

d Gauge L Screw Material f1 Maximum Order No. Bag Order No. Box- Pitch Length Capacity Fixing Quantity Quantity

to Timber

12 - 11 65 Brass 30 - - SW12065DFA 20068 S/S 30 - - SW12068SFA 200

54

5



55

5

BOUSTEAD™ SELF DRILLING METAL SCREWSCOUNTERSUNK HEAD DRILL POINT~ Yellow Zinc finish.~ For fixing pre drilled timber and metal to metal.~ Internal applications.

d Gauge Head Style L Screw t Maximum f2 Maximum Order No. Bag Order No. Box- Pitch Length Metal Capacity Fixing Quantity Quantity

Thickness to Steel

6 - 20 Standard 16 2.8 7 - - SD06016YFB 1000Standard 25 2.8 16 - - SD06025YFB 1000Standard 50 2.8 41 467829 100 SD06050YFB 1000

8 - 18 Self Embed 20 3.6 9 467911 100 SD08020YSB 1000Standard 25 3.6 14 - - SD08025YFB 1000Self Embed 25 3.6 14 - - SD08025YSB 1000Self Embed 30 3.6 19 467928 100 SD08030YSB 1000

10 - 16 Standard 30 4.5 16 306003 100 SD10030YFB 1000Standard 40 4.5 26 306102 100 SD10040YFB 1000Standard 50 4.5 36 - - SD10050YFB 500Standard 65 4.5 51 - - SD10065YFB 500

10 - 24 Standard 40 4.5 28 467850 100 SD10040YFC 1000Self Embed 40 4.5 28 - - SD10040YSC 500Standard 50 4.5 38 467867 75 SD10050YFC 500Standard 65 5.3 51 - - SD10065YFC 500

COUNTERSUNK SELF EMBEDDING HEAD WINGED DRILL POINT~ Yellow Zinc finish.~ For fixing timber and chipboard to steel framing.~ Internal applications.

6 - 20 42 2.8 - 30 - - SD06042YSBW 100050 2.8 - 38 - - SD06050YSBW 1000

10 - 16 25 4.5 - 9 - - SD10025YSBW 100030 4.5 - 14 - - SD10030YSBW 100035 4.5 - 19 306409 100 SD10035YSBW 100040 4.5 - 24 - - SD10040YSBW 100045 4.5 - 29 467874 100 SD10045YSBW 100060 4.5 - 44 - - SD10060YSBW 100070 4.5 - 54 - - SD10070YSBW 1000

12 - 14 50 4.5 - 34 - - SD12050YSBW 100060 4.5 - 44 - - SD12060YSBW 1000

COUNTERSUNK HEAD EXTENDED DRILL POINT~ Yellow Zinc finish.~ For fixing timber to metal where the drill operation is completed

prior to the thread engaging.~ Internal applications.

6 - 20 50 2.8 - 41 - - SD06050YFBE 100065 2.8 - 51 - - SD06065YFBE 1000

Standard HeadSelf Embedding Head


Metal and Timber FasteningPAN HEAD & WAFER HEAD DRILL POINT~ Yellow Zinc finish for internal use.~ XP3™ AS3566 Class 3 for external use.~ General purpose fixing to metal.~ Internal applications.

d Gauge Head Style Finish L Screw t Maximum f2 Maximum Order No. Bag Order No. Box- Pitch Length Metal Capacity Fixing Quantity Quantity

Thickness to Steel

6 - 20 Pan Yellow Zinc 12 2.8 3 - - SD06012YPB 10008 - 18 Pan Yellow Zinc 12 3.6 1 - - SD08012YPB 1000

Wafer Yellow Zinc 12 3.6 1 305259 100 SD08012YWB 1000Pan Yellow Zinc 16 3.6 5 - - SD08016YPB 1000Pan Yellow Zinc 20 3.6 9 - - SD08020YPB 1000Pan Yellow Zinc 25 3.6 14 - - SD08025YPB 1000

10 - 16 Wafer Yellow Zinc 16 4.5 2 467881 100 SD10016YWB 1000Wafer XP3™ 16 4.5 2 467973 100 SD10016MWB 1000Wafer Yellow Zinc 22 4.5 8 305105 100 SD10022YWB 1000Wafer XP3™ 22 4.5 8 467966 100 SD10022MWB 1000Wafer Yellow Zinc 30 4.5 16 305204 100 SD10030YWB 500Wafer XP3™ 30 4.5 16 467959 100 SD10030MWB 500

10 - 24 Wafer Yellow Zinc 16 4.5 2 - - SD10016YWC 1000Wafer XP3™ 16 4.5 2 - - SD10016MWC 1000Wafer Yellow Zinc 22 4.5 10 467898 100 SD10022YWC 1000Wafer XP3™ 22 4.5 8 - - SD10022MWC 1000Wafer Yellow Zinc 30 4.5 18 467904 100 SD10030YWC 500Wafer XP3™ 30 4.5 16 - - SD10030MWC 500

LARGE WAFER (TRUSS) HEAD DRILL POINT~ Yellow Zinc finish.~ For fixing metal to metal insulation foil to metal, where large

bearing area is required for clamping.~ Internal applications.

8 - 18 Large Wafer Yellow Zinc 12 3.6 1 - - SD08012YLB 1000Large Wafer Yellow Zinc 16 3.6 5 - - SD08016YLB 1000Large Wafer Yellow Zinc 20 3.6 9 304801 100 SD08020YLB 1000Large Wafer Yellow Zinc 25 3.6 14 304856 100 SD08025YLB 1000Large Wafer Yellow Zinc 30 3.6 19 - - SD08030YLB 1000

56

5

Pan Head

Wafer Head

Large Wafer (Truss) Head



57

5

HEX WASHER HEAD DRILL POINT~ Yellow Zinc finish.~ For fixing pre drilled timber or metal to metal.~ Internal applications.



8 - 18 12 3.6 - 1 - - SD08012YHB 100010 - 16 16 4.5 - 2 467751 100 SD10016YHB 1000

20 4.5 - 6 - - SD10020YHB 100025 4.5 - 11 - - SD10025YHB 1000

10 - 24 16 4.5 - 4 - - SD10016YHC 100012 - 14 20 4.5 - 6 467775 100 SD12020YHB 1000

30 4.5 - 16 - - SD12030YHB 100035 4.5 - 21 - - SD12035YHB 100045 4.5 - 31 - - SD12045YHB 1000

14 - 10 22 3.0 - 9 - - SD14022YHA 100014 - 20 22 6.3 - 6 - - SD14022YHC 1000

~ XP3™ AS3566 Class 3 finish.~ For fixing pre drilled metal or timber to metal.~ For external applications.

8 - 18 12 3.6 - 1 - - SD08012MHB 100010 - 16 16 4.5 - 2 467553 100 SD10016MHB ● 1000

25 4.5 - 11 467560 100 SD10025MHB 100010 - 24 16 4.5 - 2 - - SD10016MHC 100012 - 14 20 4.5 - 6 467577 100 SD12020MHB ● 1000

30 4.5 - 16 - - SD12030MHB 100035 4.5 - 21 467584 50 SD12035MHB 100045 4.5 - 31 467591 50 SD12045MHB 100055 4.5 - 41 - - SD12055MHB 100065 4.5 - 51 - - SD12065MHB 100075 4.5 - 61 - - SD12075MHB 1000

14 - 10 22 3.0 - 9 - - SD14022MHA 100042 3.0 - 29 - - SD14042MHA 100050 3.0 - 37 - - SD14050MHA 100065 3.0 - 52 467638 25 SD14065MHA 1000

14 - 20 22 6.3 - 6 467607 100 SD14022MHC 100014 - 14 90 6.3 - 74 - - SD14090MHB 1000

115 6.3 - 99 - - SD14115MHB 1000● Available coloured, see page 62 for further information and ordering details.

HEX WASHER HEAD SERIES 5 EXTENDED DRILL POINT ~ XP3™ AS3566 Class 3 finish.~ For fast fixing of pre drilled metal or timber to

heavy gauge metal.~ External applications.

12 - 24 32 12.7 - 4 - - Q512032MHC 100050 12.7 - 22 - - Q512050MHC 1000


Metal and Timber FasteningBOUSTEAD™ SELF DRILLING ROOF & WALL SCREWS - TIMBERTYPE 17 HEX WASHER HEAD WITH SEAL~ XP3™ AS3566 Class 3 finish.~ For fixing roof or wall cladding where waterproof seal is required.

d Gauge L Screw Bonded t Maximum f1 Maximum f2 Maximum Order No. Bag Order No. Box- Pitch Length Washer Metal Capacity Fixing Capacity Fixing Quantity Quantity


Corrugated Sheet Fixing10 - 12 20 - 1.2 1.2 - - - ST10020MHAN 1000

25 - 1.2 1.2 - - - ST10025MHAN ● 100012 - 11 25 - 1.2 1.2 - 468307 50 ST12025MHAN ● 1000

45 - 1.2 15 - 468314 50 ST12045MHAN 100050 - 1.2 18 - 013221 50 ST12050MHAN ● 100065 - 1.2 33 - 468338 40 ST12065MHAN ● 1000

14 - 10 25 - 1.2 1.2 - - - ST14025MHAN 100050 - 1.2 18 - 013306 35 ST14050MHAN ● 100065 - 1.2 33 - - - ST14065MHAN ● 100075 - 1.2 43 - 468369 25 ST14075MHAN 50090 - 1.2 58 - 468376 25 ST14090MHAN 500100 - 1.2 68 - 468383 25 ST14100MHAN 500115 - 1.2 83 - - - ST14115MHAN 500150 - 1.2 118 - - - ST14150MHAN 250

Square Rib14 - 10 50 16 1.2 16 - - - ST14050MHAZ1 ● 500

65 16 1.2 30 - - - ST14065MHAZ1 50050 25 1.2 16 - - - ST14050MHAZ3 ● 500

Poly Carb Sheet Fixing12 - 11 45 - 1.2 12 - - - ST12045MHAP 500

50 - 1.2 17 - 013245 25 ST12050MHAP 500

Hedlok Fixing12 - 11 50 1.2 18 - 468321 50 ST12050MHAG ● 1000

65 1.2 30 - - - ST12065MHAG ● 1000● Available coloured, see page 62 for further information and ordering details.

58

5

Corrugated Square Rib Poly Carb Sheet Hedlok®



59

5

BOUSTEAD™ SELF DRILLING ROOF & WALL SCREWS - METALHEX WASHER HEAD WITH SEAL DRILL POINT~ XP3™ AS3566 Class 3 finish.~ For fixing roof or wall cladding to metal where a waterproof seal is required.~ External applications.

d Gauge L Screw Bonded t Maximum f1 Maximum f2 Maximum Order No. Bag Order No. Box- Pitch Length Washer Metal Capacity Fixing Capacity Fixing Quantity Quantity


Corrugated Sheet Fixing8 - 18 12 - 3.6 - 1 - - SD08012MHBN 100010 - 16 16 - 4.5 - 2 467645 100 SD10016MHBN ● 1000

25 - 4.5 - 11 - - SD10025MHBN 100010 - 24 16 - 4.5 - 4 - - SD10016MHCN 100012 - 14 20 - 4.5 - 6 467669 100 SD12020MHBN ● 1000

30 - 4.5 - 16 - - SD12030MHBN 100035 - 4.5 - 21 - - SD12035MHBN ● 100045 - 4.5 - 31 - - SD12045MHBN ● 100045 - 4.5 - 31 Off White 304672 100 - -45 - 4.5 - 31 Mist Green 304658 100 - -55 - 4.5 - 41 - - SD12055MHBN 100065 - 4.5 - 51 013108 40 SD12065MHBN 100075 - 4.5 - 61 - - SD12075MHBN 1000

14 - 10 22 - 3.0 - 9 304306 100 SD14022MHAN ● 100042 - 3.0 - 29 304504 100 SD14042MHAN 100050 - 3.0 - 37 467713 50 SD14050MHAN 100065 - 3.0 - 52 467720 25 SD14065MHAN 1000

14 - 14 90 - 6.3 - 76 - - SD14090MHBN 50014 - 20 22 - 6.3 - 6 467706 100 SD14022MHCN 1000

Square Rib14 - 10 50 16 3.0 - 30 - - SD14050MHAZ1 ● 500

22 25 3.0 - 1.2 - - SD14022MHAZ3 50042 25 3.0 - 18 - - SD14042MHAZ3 ● 50050 25 3.0 - 30 - - SD14050MHAZ3 ● 50065 25 3.0 - 41 - - SD14065MHAZ3 ● 500

Poly Carb Sheet Fixing12 - 14 45 - 4.5 - 28 - - SD12045MHBP 1000

Hedlok Fixing12 - 14 38 - 4.5 - 16 467676 50 SD12038MHBG ● 1000

48 - 4.5 - 28 467683 50 SD12048MHBG ● 100055 - 4.5 - 41 467690 50 SD12055MHBG 100

* Fully threaded.● Available coloured, see page 62 for further information and ordering details.

Corrugated Square Rib Poly Carb Sheet Hedlok®



60

5

HEX WASHER HEAD SERIES 5 EXTENDED DRILL POINT WITH SEAL~ XP3™ AS3566 Class 3 finish.~ For fast fixing of roof or wall cladding to heavy gauge metal

where waterproof seal is required.



12 - 24 32 12.7 - 3.2 - - Q512032MHCN 100050 12.7 - 21.2 - - Q512050MHCN 1000

BOUSTEAD™ SELF DRILLING SCREWS - CYCLONE ASSEMBLIESTYPE 17 & DRILL POINT HEX WASHER HEADWITH CYCLONE ASSEMBLIES - TIMBER~ XP3™ AS3566 Class 3 finish.~ For fixing roofing to timber battens in cyclonic areas.

d Gauge Roof Sheet L Screw t Maximum f1 Maximum Order No. Bag Order No. Box- Pitch Style Length Metal Capacity Fixing Quantity Quantity

Thickness to Timber

Fixing to Timber14 - 10 Corrugated 50 1.2 18 - - ST14050MHAZC ● 250

Corrugated 65 1.2 18 - - ST14065MHAZC 250Square Rib 65 1.2 30 - - ST14065MHAZT ● 250

Fixing to Steel14 - 10 Corrugated 42 3.0 18 - - SD14042MHAZC ● 250

Square Rib 50 3.0 30 - - SD14050MHAZT ● 250Square Rib 65 3.0 30 - - SD14065MHAZT 250

● Available coloured, see page 62 for further information and ordering details.

BOUSTEAD™ CYCLONE ASSEMBLY ACCESSORIES~ For use with both metal and timber screws.

d Gauge Description Order No. Bag Order No. BoxQuantity Quantity

8 Seal - - WS08 100010 Seal - - WS10 100012 Seal - - WS12 100014 Seal - - WS14 100014 Corrugated Sheet Seal - - WS14CO 100014 Square Rib Sheet Seal - - WS14TD 100014 High Rib Sheet Seal - - WS14KL 100012 Poly Carb Sheet Seal - - WF12 100014 Bonded Seal - - WB1416 100014 Bonded Seal - - WB1419 100014 Bonded Seal - - WB1425 100014 Corrugated Sheet Cyclone Plate - - WP14CO 100014 Square Rib Sheet Cyclone Plate - - WP14TD 1000

CYCLONE PLATES

SEALING WASHERS



61

5

BOUSTEAD™ SELF DRILLING STITCHING SCREWSNEEDLE POINT~ Yellow Zinc finish.~ XP3™ AS566 Class 3 finish.~ For metal to metal joining, where

thickness does not exceed 0.84mm.~ Internal applications.

d Gauge Head Style Finish L Screw Order No. Bag Order No. Box- Pitch Length Quantity Quantity

6 - 18 Hex Washer Yellow Zinc 10 - - SN06010YHT 10007 - 16 Pan Yellow Zinc 20 - - SN07020YPT 10008 - 15 Hex Washer Yellow Zinc 12 - - SN08012YHT 1000

Hex Washer XP3™ AS566 Class 3 12 - - SN08012MHT 1000Serrated Hex Yellow Zinc 12 - - SN08012YHTS 1000Serrated Hex XP3™ AS566 Class 3 12 - - SN08012MHTS 1000Hex Washer Yellow Zinc 16 - - SN08016YHT 1000Hex Washer XP3™ AS566 Class 3 16 - - SN08016MHT 1000Serrated Hex Yellow Zinc 16 - - SN08016YHTS 1000Serrated Hex XP3™ AS566 Class 3 16 - - SN08016MHTS 1000Serrated Hex Yellow Zinc 32 - - SN08032YHTS 1000

10 - 12 Hex Washer Yellow Zinc 20 - - SN10020YHT 1000Hex Washer XP3™ AS566 Class 3 20 - - SN10020MHT 1000Hex with Seal XP3™ AS566 Class 3 20 - - SN10020MHTN 1000

BOUSTEAD™ SELF TAPPING SCREWSCOUNTERSUNK HEAD SELF TAPPING SCREWS~ Phillips recess.~ General purpose wood and metal fixing.~ Metal fixing requires pre drilled hole.

d Gauge L Screw 304 Stainless Steel Bag Zinc Plated BoxLength Order No. Quantity Order No. Quantity

4 1/2” - - SS04012ZFB 10005/8” - - SS04016ZFB 10003/4” - - SS04020ZFB 1000

5 5/8” - - SS05016ZFB 10006 1/2” SS06012SFB 1000 SS06012ZFB 1000

5/8” - - SS06016ZFB 10003/4” SS06020SFB 1000 SS06020ZFB 10001” SS06025SFB 1000 SS06025ZFB 10001 1/4” SS06030SFB 1000 SS06030ZFB 10001 1/2” SS06038SFB 500 SS06038ZFB 5002” - - SS06050ZFB 500

8 1/2” SS08012SFB 1000 - -5/8” - - SS08016ZFB 10003/4” SS08020SFB 1000 SS08020ZFB 10001” SS08025SFB 1000 SS08025ZFB 5001 1/4” SS08030SFB 500 SS08030ZFB 5001 1/2” SS08038SFB 500 SS08038ZFB 5001 3/4” - - SS08045ZFB 5002” SS08050SFB 500 SS08050ZFB 500

10 5/8” - - SS10016ZFB 10003/4” - - SS10020ZFB 10001” SS10025SFB 500 SS10025ZFB 10001 1/4” SS10030SFB 500 SS10030ZFB 5001 1/2” SS10038SFB 250 SS10038ZFB 5002” SS10050SFB 250 SS10050ZFB 2502 1/2” - - SS10065ZFB 250

Hex Washer Head

Serrated Hex Washer Head

Hex Washer Head with Seal

Pan Head



62

5

UNDERCUT SELF TAPPING SCREWS ZINC PLATED~ Phillips recess.~ For use with hinges on aluminium and steel frames.

d Gauge L Screw 304 Stainless Steel Bag Zinc Plated BoxLength Order No. Quantity Order No. Quantity

8 3/8” - - SS08010ZUB 10001/2” SS08012SUB 1000 - -5/8” - - SS08016ZUB 10003/4” - - SS08020ZUB 1000

10 1/2” SS10012SUB 1000 SS10012ZUB 1000

PAN HEAD SELF TAPPING SCREWS~ Phillips recess.~ General purpose wood and metal fixing.~ Metal fixing requires pre drilled hole.

4 1/4” - - SS04006ZPB 10001/2” - - SS04012ZPB 1000

6 1/4” - - SS06006ZPB 10003/8” SS06010SPB 1000 SS06010ZPB 10001/2” SS06012SPB 1000 SS06012ZPB 10005/8” SS06016SPB 1000 SS06016ZPB 10003/4” SS06020SPB 1000 SS06020ZPB 10001” SS06025SPB 1000 SS06025ZPB 10001 1/4” SS06030SPB 1000 SS06030ZPB 10001 1/2” SS06038SPB 500 SS06038ZPB 500

8 3/8” SS08010SPB 1000 SS08010ZPB 10001/2” SS08012SPB 1000 SS08012ZPB 10005/8” SS08016SPB 1000 SS08016ZPB 10003/4” SS08020SPB 1000 SS08020ZPB 10001” SS08025SPB 1000 SS08025ZPB 5001 1/4” SS08030SPB 500 SS08030ZPB 5001 1/2” SS08038SPB 500 SS08038ZPB 5001 3/4” - - SS08045ZPB 5002” SS08050SPB 500 SS08050ZPB 500

10 1/2” SS10012SPB 1000 SS10012ZPB 10005/8” - - SS10016ZPB 10003/4” - - SS10020ZPB 10001” SS10025SPB 500 SS10025ZPB 10001 1/4” SS10030SPB 500 SS10030ZPB 5001 1/2” SS10038SPB 250 SS10038ZPB 5002” - - SS10050ZPB 2502 1/2” - - SS10065ZPB 250

12 3/4” - - SS12020ZPB 5001 1/4” - - SS12030ZPB 500

Ordering Boustead™ Fasteners in coloursMany self drilling screws are available with coloured heads to suit roofing and cladding materials.

Colour Colour Code Colour Colour Code Colour Colour Code

Heritage Red HR Off White FW Ebony BLTuscan Red AR Birch BH Caufield Green CGPale Terracotta PE Stone BG River Gum RGWheat WE Gull Grey GG Mist Green MEMerino MR Armour Grey AG Torres Blue TBSmooth Cream SC Slate Grey SG Mountain Blue MB

Note: Other colours available on request.

HOW TO ORDERSimply add the colour code onto the end of the screw part number.

For example: For a Type 17 12 Gauge x 50 Class 3 Hex Head Screwwith Neoprene Sealing Washer: Part No. ST12050MHAN

To order in Caulfield Green: ST12050MHANCG



63

5

BOUSTEAD™ RIVETSALUMINIUM/STEEL/MONEL RIVETS

Grip Range Bd Body ø Head Type Aluminium/Steel Monel/Steel Steel/Steel PackOrder No. Order No. Order No. Quantity

1.6 - 3.2 3.2 Truss Dome RB42ASDO RMS42 RSS42 10003.2 - 4.8 3.2 Truss Dome RB43ASDO - RSS43 10004.8 - 6.4 3.2 Truss Dome RB44ASDO RMS44 RSS44 10006.4 - 7.9 3.2 Truss Dome RB45ASDO - - 10007.9 - 9.5 3.2 Truss Dome RB46ASDO - RSS46 10004.8 - 6.4 4.0 Truss Dome RB54ASDO - - 10007.9 - 9.5 4.0 Truss Dome RAS56 - - 5004.8 - 6.4 4.8 Truss Dome RB64ASDO - - 500

MULTI GRIP/SNAP HEAD RIVETS

0.8 - 4.8 3.2 Snap Head RAS43M 10004.0 - 8.0 3.2 Snap Head RAS45M 10001.2 - 6.4 4.0 Snap Head RAS54M 10004.8 - 11.1 4.8 Snap Head RAS67M 5006.4 - 12.7 4.8 Large Flange RAS68ML 35012.7 - 19.8 4.8 Large Flange RAS612ML 250

HAND RIVETING TOOL


Heavy duty plier type tradesmen’s tool - for use with all sizes of Ramset Rivets SETASP

Pliers


Togglemate™ and Wallmate™

Togglemate 66Wallmate 66

Hollow Wall Anchor

Hollow Wall Anchor 66Hollow Wall Anchor Setting Tool 66

Ramtoggles

Ramtoggles 66

Gravity, Spring & Hook Toggles

Gravity, Spring & Hook Toggles 67

Multiclip

Multiclip 67

65

6

6 Plasterboard and Cavity Fasteners

Heavy Duty Utility Hook

Heavy Duty Utility Hook 67

Wall Grabb’r

Wall Grabb’r 67

Electrical Support Clips

Dynaclips 67Vertical Flange Clip 67


Plasterboard and Cavity Fasteners

66

6

PLASTERBOARD & CAVITY FASTENERSTOGGLEMATE™ AND WALLMATE™~ Self drilling.~ Self clamping of anchor.~ Screw can be replaced without losing anchor.~ All metal body.

Sg Screw Gauge Wt Wall Thickness Type Order No. Packx Quantity

SL Minimum Screw Length

8 x 20 10 - 13mm Togglemate TM16 508 x 20 5 - 10mm Metal Wallmate WMZ 100

6 - 7 x 20 10 - 12mm Nylon Wallmate WM25 100

HOLLOW WALL ANCHOR~ Flush finish, low profile head.~ Anti rotation barbs on head flange.~ Collapsing legs with integral nut.~ Can be set with a setting tool.

db Thread do Hole ø Wt Wall Thickness Type Order No. PackSize Quantity

M4 8 Up to 5 HW05M4 100M4 8 6 - 10 Pointed HW10M4P 100M4 8 6 - 10 HW10M4 100M4 8 8 - 13 HW13M4 100M4 8 16 - 24 HW24M4 100M4 8 34 - 38 HW38M4 100M5 9 7 - 14 HW14M5 100M6 13 6 - 16 HW16M6 100Hand Setting Tool Gun SETHWGHand Setting Tool Plier SETHWP

RAMTOGGLES~ Suitable for cavity and solid wall applications.~ Wide wing span for maximum holding power.~ Anti rotation fins.~ Nylon body is non-conductive.

do Hole Size Sg Screw Gauge Wt Wall Thickness Type Order No. PackQuantity

8 6 - 8 10 - 12 1 LP12 1008 6 - 8 5 - 10mm 2 RT10 1008 6 - 8 8 - 12mm 2 RT12 1008 6 - 8 12 - 18mm 2 RT16 100

Togglemate™ Wallmate™

Plier Setting ToolGun Setting Tool

1 2


Plasterboard and Cavity Fasteners

67

6

Gravity Toggle Spring Toggle

GRAVITY, SPRING AND HOOK TOGGLES~ Wall and ceiling mounted (spring toggle)~ Wall mounted only(gravity toggle)~ Removable.~ Strong and secure.

do Hole Size db Screw Thread SizeHead Type Hook Toggle Pack Gravity Toggle Pack Spring Toggle Packx Quantity Order No. Quantity Order No. Quantity

SL Screw Length

7/16” 1/8” x 50 Round - - GTR04050 100 STR04050 1009/16” 3/16” x 50 Round - - GTR05050 100 STR05050 1009/16” 3/16” x 50 Countersunk - - GTF05050 100 STF05050 1009/16” 3/16” x 75 Round - - GTR05075 100 STR05075 509/16” 3/16” x 75 Countersunk - - GTF05075 100 STF05075 509/16” 3/16” x 100 Round - - - - STR05100 509/16” 3/16” x 50 Cup Hook STK05050 50 - - - -9/16” 3/16” x 50 Square Hook STQ05050 50 - - - -

MULTICLIP~ Quick and easy fix.~ Fixes cables, conduits and pipes ø6mm to ø25mm.~ Strap can be released for additional cables in future.~ Non-conductive.

L Anchor do Hole ø Cable Diameter Order No. PackLength x Quantity

hL Hole Depth

35 8 x 40 6 - 25 RTCUV25 50

HEAVY DUTY UTILITY HOOK~ A metal, multi purpose hook.

hd Hole Diameter Order No. PackQuantity

6 THH6800 100

WALL GRABB’R™~ Simple to install.~ Easy to remove.~ Secure fixing into plasterboard, masonite and plyboard.

SL Screw Length Wt Wall Thickness Order No. Packx Quantity

Sg Screw Gauge

30 x 8 5 - 16 GP16 100

ELECTRICAL SUPPORT CLIPSFor fast fixing of cables to steel structures

Fastens Cable Flange Type Order No. PackThickness Quantity

8 - 10 2 - 8 mm Dynaclip DK10 10016 - 20 2 - 10 mm Dynaclip DK20 10025 - 32 2 - 10 mm Dynaclip DK32 100- 1.6 - 2.5 Vertical Flange Clip VF1 100

DynaclipVertical

Flange Clip


012965 . . . . . . . . . . 52

013009 . . . . . . . . . . 53

013108 . . . . . . . . . . 59

013221 . . . . . . . . . . 58

013245 . . . . . . . . . . 58

013306 . . . . . . . . . . 58

300605 . . . . . . . . . . 51

304306 . . . . . . . . . . 59

304504 . . . . . . . . . . 59

304658 . . . . . . . . . . 59

304672 . . . . . . . . . . 59

304801 . . . . . . . . . . 56

304856 . . . . . . . . . . 56

305105 . . . . . . . . . . 56

305204 . . . . . . . . . . 56

305259 . . . . . . . . . . 56

306003 . . . . . . . . . . 55

306102 . . . . . . . . . . 55

306409 . . . . . . . . . . 55

308809 . . . . . . . . . . 50

463609 . . . . . . . . . . 27

464224 . . . . . . . . . . 28

464255 . . . . . . . . . . 28

464286 . . . . . . . . . . 28

464316 . . . . . . . . . . 28

464347 . . . . . . . . . . 28

464378 . . . . . . . . . . 28

464408 . . . . . . . . . . 28

464439 . . . . . . . . . . 28

464460 . . . . . . . . . . 28

464491 . . . . . . . . . . 28

464521 . . . . . . . . . . 28

464552 . . . . . . . . . . 28

464583 . . . . . . . . . . 28

467553 . . . . . . . . . . 57

467560 . . . . . . . . . . 57

467577 . . . . . . . . . . 57

467584 . . . . . . . . . . 57

467591 . . . . . . . . . . 57

467607 . . . . . . . . . . 57

467638 . . . . . . . . . . 57

467645 . . . . . . . . . . 59

467669 . . . . . . . . . . 59

467676 . . . . . . . . . . 59

467683 . . . . . . . . . . 59

467690 . . . . . . . . . . 59

467706 . . . . . . . . . . 59

467713 . . . . . . . . . . 59

467720 . . . . . . . . . . 59

467751 . . . . . . . . . . 57

467775 . . . . . . . . . . 57

467829 . . . . . . . . . . 55

467850 . . . . . . . . . . 55

467867 . . . . . . . . . . 55

467874 . . . . . . . . . . 55

467881 . . . . . . . . . . 56

467898 . . . . . . . . . . 56

467904 . . . . . . . . . . 56

467911 . . . . . . . . . . 55

467928 . . . . . . . . . . 55

467959 . . . . . . . . . . 56

467966 . . . . . . . . . . 56

467973 . . . . . . . . . . 56

467980 . . . . . . . . . . 49

467997 . . . . . . . . . . 49

468031 . . . . . . . . . . 49

468048 . . . . . . . . . . 49

468055 . . . . . . . . . . 49

468062 . . . . . . . . . . 49

468109 . . . . . . . . . . 49

468116 . . . . . . . . . . 49

468130 . . . . . . . . . . 49

468147 . . . . . . . . . . 49

468161 . . . . . . . . . . 49

468178 . . . . . . . . . . 49

468208 . . . . . . . . . . 54

468215 . . . . . . . . . . 54

468222 . . . . . . . . . . 54

468239 . . . . . . . . . . 54

468253 . . . . . . . . . . 54

468260 . . . . . . . . . . 54

468277 . . . . . . . . . . 54

468284 . . . . . . . . . . 54

468291 . . . . . . . . . . 54

468307 . . . . . . . . . . 58

468314 . . . . . . . . . . 58

468321 . . . . . . . . . . 58

468338 . . . . . . . . . . 58

468369 . . . . . . . . . . 58

468376 . . . . . . . . . . 58

468383 . . . . . . . . . . 58

468406 . . . . . . . . . . 53

468413 . . . . . . . . . . 54

468444 . . . . . . . . . . 54

468468 . . . . . . . . . . 54

468499 . . . . . . . . . . 53

468505 . . . . . . . . . . 53

468512 . . . . . . . . . . 53

468529 . . . . . . . . . . 53

468536 . . . . . . . . . . 53

468543 . . . . . . . . . . 53

468550 . . . . . . . . . . 53

468567 . . . . . . . . . . 53

468574 . . . . . . . . . . 53

468581 . . . . . . . . . . 53

468598 . . . . . . . . . . 53

468635 . . . . . . . . . . 50

468680 . . . . . . . . . . 51

468697 . . . . . . . . . . 51

468703 . . . . . . . . . . 51

468710 . . . . . . . . . . 51

468727 . . . . . . . . . . 51

468734 . . . . . . . . . . 51

468741 . . . . . . . . . . 51

468758 . . . . . . . . . . 51

468802 . . . . . . . . . . 51

468819 . . . . . . . . . . 51

468826 . . . . . . . . . . 52

468840 . . . . . . . . . . 52

468857 . . . . . . . . . . 52

468864 . . . . . . . . . . 52

468871 . . . . . . . . . . 52

468888 . . . . . . . . . . 52

468932 . . . . . . . . . . 52

468949 . . . . . . . . . . 52

473134 . . . . . . . . . . 53

473141 . . . . . . . . . . 52

473158 . . . . . . . . . . 52

527141 . . . . . . . . . . 26

529015 . . . . . . . . . . 32

529107 . . . . . . . . . . 32

529138 . . . . . . . . . . 32

529169 . . . . . . . . . . 32

529190 . . . . . . . . . . 32

529251 . . . . . . . . . . 32

529282 . . . . . . . . . . 32

529312 . . . . . . . . . . 32

720108 . . . . . . . . . . 28

720115 . . . . . . . . . . 28

720122 . . . . . . . . . . 28

720139 . . . . . . . . . . 28

830050 . . . . . . . . . . 45

830074 . . . . . . . . . . 45

830098 . . . . . . . . . . 45

830104 . . . . . . . . . . 45

830111 . . . . . . . . . . 45

930109 . . . . . . . . . . 52

NUMERICAL CODESProduct Code Index

68


69

Product Code Index

A

AS06050F. . . . . . . . 24

AS06050H . . . . . . . 24

AS06050K . . . . . . . 24

AS06050X . . . . . . . 24

AS06075F. . . . . . . . 24

AS06075H . . . . . . . 24

AS06100F. . . . . . . . 24

AS06100H . . . . . . . 24

AS08050F. . . . . . . . 24

AS08055K . . . . . . . 24

AS08055X . . . . . . . 24

AS08060H . . . . . . . 24

AS08075F. . . . . . . . 24

AS08075H . . . . . . . 24

AS08100H . . . . . . . 24

AS10060H . . . . . . . 24

AS10075H . . . . . . . 24

AS10100H . . . . . . . 24

AS10150H . . . . . . . 24

AS12075H . . . . . . . 24

AS12100H . . . . . . . 24

AS12150H . . . . . . . 24

B

BAC04 . . . . . . . . . . 14

BAC04065 . . . . . . . 14

BAC06 . . . . . . . . . . 14

BAC06060 . . . . . . . 14

BAC06075 . . . . . . . 14

BAC06100 . . . . . . . 14

BAC08 . . . . . . . . . . 14

BAC08075 . . . . . . . 14

BAC08100 . . . . . . . 14

BAC08140 . . . . . . . 14

BAC10 . . . . . . . . . . 14

BAC10090 . . . . . . . 14

BAC10125 . . . . . . . 14

BAC12 . . . . . . . . . . 14

BAC12085 . . . . . . . 14

BAC12115 . . . . . . . 14

BAC12150 . . . . . . . 14

BGUNS . . . . . . . . . 42

BKBGU37 . . . . . . . 42

BLBRGYC . . . . . . . 43

BLBRGYS . . . . . . . 43

BRPE06 . . . . . . . . . 43

BRPE08 . . . . . . . . . 43

BRPE10 . . . . . . . . . 43

BRPE13 . . . . . . . . . 43

BRPE15 . . . . . . . . . 43

BRPE20 . . . . . . . . . 43

BRPE25 . . . . . . . . . 43

BRPE30 . . . . . . . . . 43

BRPE40 . . . . . . . . . 43

C

C101C. . . . . . . . . . . 21

C101J . . . . . . . . . . . 21

C101M. . . . . . . . . . 21

C102C. . . . . . . . . . . 21

C102J . . . . . . . . . . . 21

C801C. . . . . . . . . . . 21

C801J . . . . . . . . . . . 21

C802C. . . . . . . . . . . 21

C802J . . . . . . . . . . . 21

CAGU300 . . . . . . . . 42

CAGU850 . . . . . . . . 42

CD420. . . . . . . . . . . 27

CD425. . . . . . . . . . . 27

CD430. . . . . . . . . . . 27

CD440. . . . . . . . . . . 27

CD445. . . . . . . . . . . 27

CD450. . . . . . . . . . . 27

CD520. . . . . . . . . . . 27

CD525. . . . . . . . . . . 27

CD530. . . . . . . . . . . 27

CD540. . . . . . . . . . . 27

CD550. . . . . . . . . . . 27

CF450W . . . . . . . . . 27

CF650 . . . . . . . . . . . 27

CF660 . . . . . . . . . . . 27

CF675 . . . . . . . . . . . 27

CF699 . . . . . . . . . . . 27

CHEM08. . . . . . . . . 20

CHEM10. . . . . . . . . 20

CHEM12. . . . . . . . . 20

CHEM16. . . . . . . . . 20

CHEM2024. . . . . . . 20

CMTK. . . . . . . . . . . 22

CK540. . . . . . . . . . . 27

CK750. . . . . . . . . . . 27

CK760. . . . . . . . . . . 27

CK775. . . . . . . . . . . 27

CMCRL20. . . . . . . . 46

CMCRL5. . . . . . . . . 46

CNBDL1. . . . . . . . . 46

CNBDL2. . . . . . . . . 46

CNBDL20. . . . . . . . 46

CNBDL5. . . . . . . . . 46

CNBDM250 . . . . . . 46

CNBDM500 . . . . . . 46

CR12160. . . . . . . . . 21

CR12160GH . . . . . . 21

CR16190. . . . . . . . . 21

CR16190GH . . . . . . 21

CR970. . . . . . . . . . . 27

CR999. . . . . . . . . . . 27

CS08110. . . . . . . . . 20

CS08110GH . . . . . . 20

CS08110SS . . . . . . 20

CS10130. . . . . . . . . 20

CS10130GH . . . . . . 20

CS10130SS . . . . . . 20

CS12160. . . . . . . . . 20

CS12160GH . . . . . . 20

CS12160SS . . . . . . 20

CS12180. . . . . . . . . 20

CS16190. . . . . . . . . 20

CS16190GH . . . . . . 20

CS16190SS . . . . . . 20

CS20260. . . . . . . . . 20

CS20260GH . . . . . . 20

CS20260SS . . . . . . 20

CS24300. . . . . . . . . 20

CS24300GH . . . . . . 20

CS24300SS . . . . . . 20

CSD12C . . . . . . . . . 32

CUA . . . . . . . . . . . . 22

CW415 . . . . . . . . . . 27

CW415Q500. . . . . . 27

CW420 . . . . . . . . . . 27

CW420Q500. . . . . . 27

CW425 . . . . . . . . . . 27

CW425Q500. . . . . . 27

CW430 . . . . . . . . . . 27

CW430Q500. . . . . . 27

CW440 . . . . . . . . . . 27

CW540 . . . . . . . . . . 27

CW550 . . . . . . . . . . 27

D

D06026S. . . . . . . . . 17

D06038S. . . . . . . . . 17

D08042X. . . . . . . . . 17

D08045E. . . . . . . . . 17

D08045K. . . . . . . . . 17

D230. . . . . . . . . . . . . 6

DA64R3 . . . . . . . . . 35

DAADCK12 . . . . . . 35

DAHR25280 . . . . . . 37

DAKC2 . . . . . . . . . . 35

DAKC4 . . . . . . . . . . 35

DAR3DH . . . . . . . . 35

DAR3HR. . . . . . . . . 37

DASM37 . . . . . . . . 35

DASMHR. . . . . . . . 37

DASMR3 . . . . . . . . 35

DC08040. . . . . . . . . 17

DC10050. . . . . . . . . 17

DC12060. . . . . . . . . 17

DCHR040 . . . . . . . . 37

DCHR050 . . . . . . . . 37

DCHR065 . . . . . . . . 37

DCHR080 . . . . . . . . 37

DCHR090 . . . . . . . . 37

DCHR100 . . . . . . . . 37

DD316 . . . . . . . . . . 32

DD521 . . . . . . . . . . 34

DD524 . . . . . . . . . . 34

DD525 . . . . . . . . . . 34

DD530 . . . . . . . . . . 34

DD542 . . . . . . . . . . 34

DD560 . . . . . . . . . . 36

DD575 . . . . . . . . . . 36

DD605 . . . . . . . . . . 36

DD610 . . . . . . . . . . 36

DDR305050 . . . . . . 35

DDR305065X5 . . . . 35

DDR305100 . . . . . . 35

DDR305125X5 . . . . 35

DDR306050 . . . . . . 35

DDR306050X3 . . . . 35

DDR306100 . . . . . . 35

DDR306100X3 . . . . 35

DDR306150 . . . . . . 35

DDR306150X3 . . . . 35

DDR307065 . . . . . . 35

DDR308065 . . . . . . 35

DDR308150 . . . . . . 35

DDR310100 . . . . . . 35

DDR310180 . . . . . . 35

DDR310400 . . . . . . 35

DDR312125 . . . . . . 35

DDR312125X7 . . . . 35

DDR312250 . . . . . . 35

DDR312400 . . . . . . 35

DDR313215 . . . . . . 35

DDR314200 . . . . . . 35

DDR315150 . . . . . . 35

DDR316125 . . . . . . 35

DDR316200 . . . . . . 35

DDR316400 . . . . . . 35

DDSM12200 . . . . . 37

DDSM12400 . . . . . 37

DDSM14200 . . . . . 37

DDSM14400 . . . . . 37

DF045SS . . . . . . . . 17

DF06SS . . . . . . . . . 17

DF08SS . . . . . . . . . 17

DHR3FCS. . . . . . . . 38

DHR3PCS . . . . . . . 38

DHR3SC040. . . . . . 38

DHSMFCL . . . . . . . 38

DHSMFCM . . . . . . 38

DHSMFCS . . . . . . . 38

DHSMPCL . . . . . . . 38

DHSMPCM . . . . . . 38

DHSMPCS. . . . . . . 38

DHSMSC050 . . . . . 38

DHSMSC080 . . . . . 38

DHSMSC115 . . . . . 38

DK10. . . . . . . . . . . . 67

DK20. . . . . . . . . . . . 67

DK32. . . . . . . . . . . . 67

DLP06. . . . . . . . . . . 26

DLP08. . . . . . . . . . . 26

DLP10. . . . . . . . . . . 26

DNM06 . . . . . . . . . 26

DNM08 . . . . . . . . . 26

DNM10 . . . . . . . . . 26

DNM12 . . . . . . . . . 26

DNP05 . . . . . . . . . . 26

DNP06 . . . . . . . . . . 26

DNP07 . . . . . . . . . . 26

DNP08 . . . . . . . . . . 26

DNP10 . . . . . . . . . . 26

DNP12 . . . . . . . . . . 26

DP06040. . . . . . . . . 16

DP06040SS . . . . . . 16

DP06055R . . . . . . . 17

DP06060. . . . . . . . . 16

DP06060F. . . . . . . . 17

DP06060FSS . . . . . 17

DP06060SS . . . . . . 16

DP06075F. . . . . . . . 17

DP06075FSS . . . . . 17

DP06075R . . . . . . . 17

DP06095R . . . . . . . 17

DP06100F. . . . . . . . 17

DP08040. . . . . . . . . 16

DP08040SS . . . . . . 16

DP08045H . . . . . . . 16

DP08045HSS. . . . . 16

DP08060F. . . . . . . . 17

DP08060R . . . . . . . 17

DP08065. . . . . . . . . 16

DP08065SS . . . . . . 16

DP08070H . . . . . . . 16

DP08070HSS. . . . . 16

DP08085F. . . . . . . . 17

DP08090. . . . . . . . . 16

DP08090SS . . . . . . 16

DP08095H . . . . . . . 16

DP10040. . . . . . . . . 16

DP10040GH . . . . . . 16

DP10045H . . . . . . . 16

DP10045HSS. . . . . 16

DP10050. . . . . . . . . 16

DP10050GH . . . . . . 16

ALPHABETICAL CODES


DP10050SS . . . . . . 16

DP10055H . . . . . . . 16

DP10060HSS. . . . . 16

DP10075. . . . . . . . . 16

DP10075F. . . . . . . . 17

DP10075GH . . . . . . 16

DP10075SS . . . . . . 16

DP10080H . . . . . . . 16

DP10080HSS. . . . . 16

DP10100. . . . . . . . . 16

DP10100F. . . . . . . . 17

DP10100GH . . . . . . 16

DP10100SS . . . . . . 16

DP10105H . . . . . . . 16

DP10105HSS. . . . . 16

DP10125. . . . . . . . . 16

DP10125F. . . . . . . . 17

DP12060. . . . . . . . . 16

DP12060GH . . . . . . 16

DP12060SS . . . . . . 16

DP12065H . . . . . . . 16

DP12070. . . . . . . . . 16

DP12070GH . . . . . . 16

DP12070SS . . . . . . 16

DP12075H . . . . . . . 16

DP12075HSS. . . . . 16

DP12100. . . . . . . . . 16

DP12100GH . . . . . . 16

DP12100SS . . . . . . 16

DP12105H . . . . . . . 16

DP12125. . . . . . . . . 16

DP12125GH . . . . . . 16

DP12125SS . . . . . . 16

DP16065. . . . . . . . . 16

DP16065GH . . . . . . 16

DP16070H . . . . . . . 16

DP16110. . . . . . . . . 16

DP16110GH . . . . . . 16

DP16110H . . . . . . . 16

DP16140. . . . . . . . . 16

DP16140GH . . . . . . 16

DP20080. . . . . . . . . 16

DP20080GH . . . . . . 16

DP20115. . . . . . . . . 16

DP20115GH . . . . . . 16

DP20160. . . . . . . . . 16

DQR316200 . . . . . . 35

DQR316400 . . . . . . 35

DQR318200 . . . . . . 35

DQR318400 . . . . . . 35

DQR319250 . . . . . . 35

DQR320200 . . . . . . 35

DQR320400 . . . . . . 35

DQR322200 . . . . . . 35

DQR322400 . . . . . . 35

DQR324200 . . . . . . 35

DQR324400 . . . . . . 35

DQR325400 . . . . . . 35

DQR326200 . . . . . . 35

DQR326400 . . . . . . 35

DR045SS . . . . . . . . 17

DR06. . . . . . . . . . . . 17

DR06SS . . . . . . . . . 17

DR08. . . . . . . . . . . . 17

DSF10. . . . . . . . . . . 18

DSLWG450 . . . . . . 43

DSM06. . . . . . . . . . 18

DSM06SS . . . . . . . 18

DSM08. . . . . . . . . . 18

DSM08SS . . . . . . . 18

DSM10. . . . . . . . . . 18

DSM10SS . . . . . . . 18

DSM12. . . . . . . . . . 18

DSM12SS . . . . . . . 18

DSM16. . . . . . . . . . 18

DSM16SS . . . . . . . 18

DSM20. . . . . . . . . . 18

DSNS11DE . . . . . . 32

DSNS20DE . . . . . . 32

DSNS30DE . . . . . . 32

DSUS04DE . . . . . . 32

DUP10080F . . . . . . 26

DUP10080H . . . . . . 26

DUP10100F . . . . . . 26

DUP10100H . . . . . . 26

DUP10135F . . . . . . 26

DUP10135H . . . . . . 26

DUP10160F . . . . . . 26

DUP10160H . . . . . . 26

DYSHCLL20 . . . . . . 44

DYSHCLL4 . . . . . . . 44

DYSLGRG450 . . . . 43

DYSLGYG750. . . . . 43

DYSLWHG450 . . . . 43

DYSM16200. . . . . . 37

DYSM16400. . . . . . 37

DYSM18200. . . . . . 37

DYSM18400. . . . . . 37

DYSM19195. . . . . . 37

DYSM20200. . . . . . 37

DYSM20400. . . . . . 37

DYSM20800. . . . . . 37

DYSM22200. . . . . . 37

DYSM22400. . . . . . 37

DYSM24200. . . . . . 37

DYSM24400. . . . . . 37

DYSM25200. . . . . . 37

DYSM25400. . . . . . 37

DYSM25800. . . . . . 37

DYSM26250. . . . . . 37

DYSM26400. . . . . . 37

DYSM28250. . . . . . 37

DYSM28450. . . . . . 37

DYSM28550. . . . . . 37

DYSM30250. . . . . . 37

DYSM30450. . . . . . 37

DYSM32250. . . . . . 37

DYSM32450. . . . . . 37

DYSM35250. . . . . . 37

DYSM35450. . . . . . 37

DYSM35550. . . . . . 37

DYSM38450. . . . . . 37

DYSM40450. . . . . . 37

E

ED05033. . . . . . . . . 25

ED05033SS . . . . . . 25

ED05050. . . . . . . . . 25

ED05050BL . . . . . . 25

ED06042. . . . . . . . . 25

ED06042SS . . . . . . 25

ED06055. . . . . . . . . 25

ED06055BL . . . . . . 25

ED06055SS . . . . . . 25

ED06075. . . . . . . . . 25

ED06075SS . . . . . . 25

ED08080. . . . . . . . . 25

ED08120. . . . . . . . . 25

EPGRL16 . . . . . . . . 45

EPGRL2 . . . . . . . . . 45

EPGRL4 . . . . . . . . . 45

EPPHL1 . . . . . . . . . 45

EPPHL20 . . . . . . . . 45

EPPHL3 . . . . . . . . . 45

EPPSL15 . . . . . . . . 45

EPPSL3 . . . . . . . . . 45

EPPYL1 . . . . . . . . . 45

EPPYL2 . . . . . . . . . 45

EPPYL20 . . . . . . . . 45

EPPYL4 . . . . . . . . . 45

EPPYL8 . . . . . . . . . 45

F

FE10045 . . . . . . . . . 29

FE10045GH . . . . . . 29

FE12055 . . . . . . . . . 29

FE12055GH . . . . . . 29

FE12070 . . . . . . . . . 29

FE12070GH . . . . . . 29

FE12095 . . . . . . . . . 29

FE12095GH . . . . . . 29

FE16070 . . . . . . . . . 29

FE16070GH . . . . . . 29

FE16095 . . . . . . . . . 29

FE16095GH . . . . . . 29

FE20070 . . . . . . . . . 29

FE20070GH . . . . . . 29

FE20095 . . . . . . . . . 29

FE20095GH . . . . . . 29

FE24070 . . . . . . . . . 29

FE24070GH . . . . . . 29

FE24095 . . . . . . . . . 29

FE24095GH . . . . . . 29

FE24115 . . . . . . . . . 29

FE24115GH . . . . . . 29

FH12065 . . . . . . . . . 29

FH12096 . . . . . . . . . 29

FH16075 . . . . . . . . . 29

FH16075GH . . . . . . 29

FH16096 . . . . . . . . . 29

FH16096GH . . . . . . 29

FH20075 . . . . . . . . . 29

FH20075GH . . . . . . 29

FH20096 . . . . . . . . . 29

FH20096GH . . . . . . 29

FLFXL20 . . . . . . . . . 43

FLFXL4 . . . . . . . . . . 43

FMFLG500 . . . . . . . 44

FMFLG750 . . . . . . . 44

FMPLG750. . . . . . . 44

FMSVM500 . . . . . . 44

FormMaster™ . . . . 6

FWPT6L . . . . . . . . . 42

G

GA102MC16 . . . . . 39

GA102SC16 . . . . . . 39

GA102SG16 . . . . . . 39

GA102SG16T. . . . . 39

GA115MCU7 . . . . . 39

GA115SCU7. . . . . . 39

GA115SGU7 . . . . . 39

GA127SCU7. . . . . . 39

GA127SGU7 . . . . . 39

GA178SCU7. . . . . . 39

GA230MCU7 . . . . . 39

GA230MCU8 . . . . . 39

GA230RCU7. . . . . . 39

GA230SC25 . . . . . . 39

GA230SCU7. . . . . . 39

GA230SGU7 . . . . . 39

GA305MCU7 . . . . . 39

GA305SC25 . . . . . . 39

GA356MC25 . . . . . 39

GA356SC25 . . . . . . 39

GLCTCLL20 . . . . . . 44

GLCTCLL4 . . . . . . . 44

GLSLCLG300 . . . . . 43

GP16. . . . . . . . . . . . 67

GPSLWHG450. . . . 43

GR115S . . . . . . . . . 39

GR230D . . . . . . . . . 39

GTF05050. . . . . . . . 67

GTF05075. . . . . . . . 67

GTR04050 . . . . . . . 67

GTR05050 . . . . . . . 67

GTR05075 . . . . . . . 67

H

HAC08 . . . . . . . . . . 20

HAC10 . . . . . . . . . . 20

HAC12 . . . . . . . . . . 20

HAC16 . . . . . . . . . . 20

HCBT13 . . . . . . . . . 23

HCBT20 . . . . . . . . . 23

HCBT26 . . . . . . . . . 23

HCP . . . . . . . . . . . . 23

HD200 . . . . . . . . . . 10

HDB38 . . . . . . . . . . 10

HDB50 . . . . . . . . . . 10

HDB64 . . . . . . . . . . 10

HDB75 . . . . . . . . . . 10

HDFM105. . . . . . . . 44

HDFM205. . . . . . . . 44

HDFM605. . . . . . . . 44

HDHX05032 . . . . . . 48

HDPH02025 . . . . . . 48

HDPH02045DE . . . 48

HDPH02050 . . . . . . 48

HDPH02065DE . . . 48

HDPH02100 . . . . . . 48

HDPH02150 . . . . . . 48

HDTT25025 . . . . . . 48

HDUN04045. . . . . . 48

HDUN04065. . . . . . 48

HDUN05050. . . . . . 48

HDUN05065. . . . . . 48

HDUN05081. . . . . . 48

HDUN06045. . . . . . 48

HDUN06065. . . . . . 48

HW05M4 . . . . . . . . 66

HW10M4 . . . . . . . 66

HW10M4P. . . . . . . 66

HW13M4 . . . . . . . 66

HW14M5 . . . . . . . . 66

HW16M6 . . . . . . . . 66

HW24M4 . . . . . . . . 66

HW38M4 . . . . . . . . 66

HYSLGYG375. . . . . 43

HYSLGYG720. . . . . 43

70

Product Code IndexALPHABETICAL CODES


71

Product Code Index

HYSLWHG375 . . . . 43

HYSLWHG720 . . . . 43

HYTGGYL6. . . . . . . 43

I

ISKP. . . . . . . . . . . . 21

ISKPT. . . . . . . . . . . 21

ISM10 . . . . . . . . . . 22

ISM12 . . . . . . . . . . 22

ISM16 . . . . . . . . . . 22

ISNE. . . . . . . . . . . . 21

ISNP. . . . . . . . . . . . 21

ISR08 . . . . . . . . . . . 23

ISR10 . . . . . . . . . . . 23

ISR12 . . . . . . . . . . . 23

ISR16 . . . . . . . . . . . 23

ISS08 . . . . . . . . . . . 22

ISS10 . . . . . . . . . . . 22

ISS12 . . . . . . . . . . . 22

J

J20S. . . . . . . . . . . . 10

JobMaster™ . . . . . 6

JTSLGYG410 . . . . . 43

JTSLTRG300 . . . . . 43

L

LAU25 . . . . . . . . . . . 8

LAU32 . . . . . . . . . . . 8

LDM14K. . . . . . . . . . 7

LDM16K. . . . . . . . . . 7

LDM18K. . . . . . . . . . 7

LDM22 . . . . . . . . . . . 7

LDM25 . . . . . . . . . . . 7

LDM30 . . . . . . . . . . . 7

LDM40 . . . . . . . . . . . 7

LDU14E . . . . . . . . . . 7

LDU16E . . . . . . . . . . 7

LDU18E . . . . . . . . . . 7

LDU22 . . . . . . . . . . . 7

LDU25 . . . . . . . . . . . 7

LDU32 . . . . . . . . . . . 7

LDU38 . . . . . . . . . . . 7

LDU42 . . . . . . . . . . . 7

LDU50 . . . . . . . . . . . 7

LDU57 . . . . . . . . . . . 7

LDU60F . . . . . . . . . . 7

LDU65 . . . . . . . . . . . 7

LDU75 . . . . . . . . . . . 7

LDU75F . . . . . . . . . . 7

LDU90 . . . . . . . . . . . 7

LDU99 . . . . . . . . . . . 7

LDU99F . . . . . . . . . . 7

LF8050 . . . . . . . . . . . 8

LF8075 . . . . . . . . . . . 8

LHS22. . . . . . . . . . . . 8

LP12 . . . . . . . . . . . . 66

LPU18M620K . . . . . 7

LSMP. . . . . . . . . . . 46

LSU12M609E. . . . . . 7

LTU25M620 . . . . . . . 7

LTU30M616 . . . . . . . 7

LWU25 . . . . . . . . . . . 8

LWU32 . . . . . . . . . . . 8

LWU75 . . . . . . . . . . . 8

N

NFCAG320. . . . . . . 43

NFCAG930. . . . . . . 43

P

PA1613. . . . . . . . . . 11

PA9289. . . . . . . . . . 11

PA9333. . . . . . . . . . 11

PAW58. . . . . . . . . . 11

PERFCLG310 . . . . . 43

PLCBL22L . . . . . . . 10

PLCGR22 . . . . . . . . 10

PLCGR22N. . . . . . . . 9

PLCGR22S . . . . . . . . 9

PLCPU22 . . . . . . . . 10

PLCPU22N. . . . . . . . 9

PLCRD22 . . . . . . . . 10

PLCRD22N. . . . . . . . 9

PLCRD22S . . . . . . . . 9

PLCWH22L . . . . . . 10

PLCWH22N . . . . . . . 9

PLCYW22. . . . . . . . 10

PLCYW22N . . . . . . . 9

PLCYW22S . . . . . . . 9

PLDBR25 . . . . . . . . . 9

PLDBU25X. . . . . . . . 9

PLDGR25 . . . . . . . . . 9

PLDRD25L . . . . . . . . 9

PLDRD25X. . . . . . . . 9

PLDYW25 . . . . . . . . 9

PLDYW25X . . . . . . . 9

PLSGR22 . . . . . . . . . 9

PLSRD22 . . . . . . . . . 9

PLSYW22. . . . . . . . . 9

PRPUL1 . . . . . . . . . 43

PRPUM250 . . . . . . 43

PSCRL20 . . . . . . . . 46

Q

Q512032MHC . . . . 57

Q512032MHCN . . . 60

Q512050MHC . . . . 57

Q512050MHCN . . . 60

QD08020Y9B . . . . . 50

QD08030Y9B . . . . . 50

QD08035Y9BW . . . 50

R

RA225. . . . . . . . . . . 22

RAM06. . . . . . . . . . 17

RAS43M . . . . . . . . 63

RAS45M . . . . . . . . 63

RAS54M . . . . . . . . 63

RAS56 . . . . . . . . . . 63

RAS612ML . . . . . . 63

RAS67M . . . . . . . . 63

RAS68ML . . . . . . . 63

RB42ASDO . . . . . . 63

RB43ASDO . . . . . . 63

RB44ASDO . . . . . . 63

RB45ASDO . . . . . . 63

RB46ASDO . . . . . . 63

RB54ASDO . . . . . . 63

RB64ASDO . . . . . . 63

RCA25F . . . . . . . . . 11

RCA38C . . . . . . . . . 11

RCC10C . . . . . . . . . 11

RCC12C . . . . . . . . . 11

RCC16C . . . . . . . . . 11

RCC20C . . . . . . . . . 11

RCC25C . . . . . . . . . 11

RCD12C . . . . . . . . . 11

RCD16F . . . . . . . . . 11

RCD22F . . . . . . . . . 11

RD442. . . . . . . . . . . 32

REM06 . . . . . . . . . . 11

REM06 . . . . . . . . . . 17

REM08 . . . . . . . . . . 17

REM10 . . . . . . . . . . 17

REM12 . . . . . . . . . . 17

REW06 . . . . . . . . . . 11

RFLCG . . . . . . . . . . 45

RFLFG. . . . . . . . . . . 45

RFM045 . . . . . . . . . 17

RFM06 . . . . . . . . . . 17

RFM08 . . . . . . . . . . 17

RFSLALG300 . . . . . 43

RFSLFWH410 . . . . 43

RFSLGYG410 . . . . . 43

RFSLTRG300 . . . . . 43

RHC16K . . . . . . . . . . 8

RHC22 . . . . . . . . . . . 8

RHC27 . . . . . . . . . . . 8

RHC32 . . . . . . . . . . . 8

RHC37 . . . . . . . . . . . 8

RHC42 . . . . . . . . . . . 8

RHC47 . . . . . . . . . . . 8

RHC52 . . . . . . . . . . . 8

RHC57 . . . . . . . . . . . 8

RHC62 . . . . . . . . . . . 8

RHC72 . . . . . . . . . . . 8

RHP16K . . . . . . . . . . 8

RHP19K . . . . . . . . . . 8

RHP22 . . . . . . . . . . . 8

RHP27 . . . . . . . . . . . 8

RHP32 . . . . . . . . . . . 8

RHP37 . . . . . . . . . . . 8

RHP42 . . . . . . . . . . . 8

RHP47 . . . . . . . . . . . 8

RHP52 . . . . . . . . . . . 8

RHP57 . . . . . . . . . . . 8

RHP62 . . . . . . . . . . . 8

RHP72 . . . . . . . . . . . 8

RLM06 . . . . . . . . . . 18

RLM08 . . . . . . . . . . 18

RLM10 . . . . . . . . . . 18

RLM12 . . . . . . . . . . 18

RLM16 . . . . . . . . . . 18

RLW04 . . . . . . . . . . 18

RLW05 . . . . . . . . . . 18

RLW06 . . . . . . . . . . 18

RLW08 . . . . . . . . . . 18

RMS42 . . . . . . . . . . 63

RMS44 . . . . . . . . . . 63

RNWYCLL20 . . . . . 44

RNWYCLL4 . . . . . . 44

RPGMP . . . . . . . . . 45

RSP . . . . . . . . . . . . 27

RSR12GM . . . . . . . 18

RSR12SS . . . . . . . . 18

RSS42 . . . . . . . . . . 63

RSS43 . . . . . . . . . . 63

RSS44 . . . . . . . . . . 63

RSS46 . . . . . . . . . . 63

RT10 . . . . . . . . . . . . 66

RT12 . . . . . . . . . . . . 66

RT16 . . . . . . . . . . . . 66

RTCM06. . . . . . . . . 11

RTCM10. . . . . . . . . 19

RTCM12. . . . . . . . . 19

RTCM20. . . . . . . . . 19

RTCM24. . . . . . . . . 19

RTCU04 . . . . . . . . . 11

RTCUV25 . . . . . . . . 67

RTKM06. . . . . . . . . 19

RTKM10. . . . . . . . . 19

RTKM12. . . . . . . . . 19

RTKM12GH . . . . . . 19

RTKM16. . . . . . . . . 19

RTKM16GH . . . . . . 19

RTKM20. . . . . . . . . 19

RTKM20GH . . . . . . 19

RTRM06L3. . . . . . . 19

RTRM08L3. . . . . . . 19

RTRM10L3. . . . . . . 19

RTRM12L3. . . . . . . 19

RTRM16L1. . . . . . . 19

RTRM16L1GH . . . . 19

RTRM20L1. . . . . . . 19

RTRM20L1GH . . . . 19

RTRM24L1GH . . . . 19

S

SA10108. . . . . . . . . 14

SA12098. . . . . . . . . 14

SA12124. . . . . . . . . 14

SA12153. . . . . . . . . 14

SA16149. . . . . . . . . 14

SA16167. . . . . . . . . 14

SA20189. . . . . . . . . 14

SA20219. . . . . . . . . 14

SA24197. . . . . . . . . 14

SA24236. . . . . . . . . 14

SABGU37 . . . . . . . 42

SACSWH. . . . . . . . 51

SACPRFW . . . . . . . 51

SC08020YSF . . . . . 51

SC08022YSF . . . . . 51

SC08025GSF . . . . . 52

SC08025YSF . . . . . 51

SC08028YSF . . . . . 51

SC08032GSF . . . . . 52

SC08032YSF . . . . . 51

SC08035GSF . . . . . 52

SC08035YSF . . . . . 51

SC08038YSF . . . . . 51

SC08041GSF . . . . . 52

SC08041YSF . . . . . 51

SC08045GSF . . . . . 52

SC08045YSF . . . . . 51

SC08051GSF . . . . . 52

SC08051YSF . . . . . 51

SC08057GSF . . . . . 52

SC08057YSF . . . . . 51

SC08065GSF . . . . . 52

SC10020YFAA . . . . 51

SC10025YFAA . . . . 51

SC10030YFAA . . . . 51

SC10035YFAA . . . . 51

SC10040YFAA . . . . 51

SC10050YFAA . . . . 51

SC10060YFAA . . . . 51

SC10065GSF . . . . . 52

SC10065YSF . . . . . 51

SC10070YFAA . . . . 51

ALPHABETICAL CODES


SC10075GSF . . . . . 52

SC10075YSF . . . . . 51

SC10100GSF . . . . . 52

SD06012YPB . . . . . 56

SD06016YFB . . . . . 55

SD06025YBB. . . . . 49

SD06025YBBC. . . . 49

SD06025YFB . . . . . 55

SD06030YBB. . . . . 49

SD06040YBB. . . . . 49

SD06042YSBW . . . 55

SD06045YBB. . . . . 49

SD06050YFB . . . . . 55

SD06050YFBE . . . . 55

SD06050YSBW . . . 55

SD06065YFBE . . . . 55

SD08012MHB . . . . 57

SD08012MHBN. . . 59

SD08012YHB. . . . . 57

SD08012YLB . . . . . 56

SD08012YPB . . . . . 56

SD08012YWB . . . . 56

SD08016YLB . . . . . 56

SD08016YPB . . . . . 56

SD08020YLB . . . . . 56

SD08020YPB . . . . . 56

SD08020YSB . . . . . 55

SD08022MSBW . . 50

SD08025YFB . . . . . 55

SD08025YLB . . . . . 56

SD08025YPB . . . . . 56

SD08025YSB . . . . . 55

SD08030YLB . . . . . 56

SD08030YSB . . . . . 55

SD08032MSBW . . 50

SD08040MSBW . . 50

SD10016MHB . . . . 57

SD10016MHBN. . . 59

SD10016MHC . . . . 57

SD10016MHCN. . . 59

SD10016MWB . . . 56

SD10016MWC . . . 56

SD10016YHB. . . . . 57

SD10016YHC . . . . . 57

SD10016YWB . . . . 56

SD10016YWC . . . . 56

SD10020YHB. . . . . 57

SD10022MWB . . . 56

SD10022MWC . . . 56

SD10022YWB . . . . 56

SD10022YWC . . . . 56

SD10025MHB . . . . 57

SD10025MHBN. . . 59

SD10025YHB. . . . . 57

SD10025YSBW . . . 55

SD10030MWB . . . 56

SD10030MWC . . . 56

SD10030YFB . . . . . 55

SD10030YSBW . . . 55

SD10030YWB . . . . 56

SD10030YWC . . . . 56

SD10035YSBW . . . 55

SD10040YFB . . . . . 55

SD10040YFC . . . . . 55

SD10040YSBW . . . 55

SD10040YSC . . . . . 55

SD10045YSBW . . . 55

SD10050YFB . . . . . 55

SD10050YFC . . . . . 55

SD10060YSBW . . . 55

SD10065YFB . . . . . 55

SD10065YFC . . . . . 55

SD10070YSBW . . . 55

SD12020MHB . . . 57

SD12020MHBN. . . 59

SD12020YHB. . . . . 57

SD12030MHB . . . 57

SD12030MHBN. . . 59

SD12030YHB. . . . . 57

SD12035MHB . . . 57

SD12035MHBN. . . 59

SD12035YHB. . . . . 57

SD12038MHBG. . . 59

SD12045MHB . . . 57

SD12045MHBN. . . 59

SD12045MHBP. . . 59

SD12045YHB. . . . . 57

SD12048MHBG. . . 59

SD12050YSBW . . . 55

SD12055MHB . . . 57

SD12055MHBG. . . 59

SD12055MHBN. . . 59

SD12060YSBW . . . 55

SD12065MHB . . . 57

SD12065MHBN. . . 59

SD12075MHB . . . 57

SD12075MHBN. . . 59

SD14022MHA . . . . 57

SD14022MHAN. . . 59

SD14022MHAZ3 . . 59

SD14022MHC . . . . 57

SD14022MHCN. . . 59

SD14022YHA. . . . . 57

SD14022YHC . . . . . 57

SD14042MHA . . . . 57

SD14042MHAN. . . 59

SD14042MHAZC. . 60

SD14050MHA . . . . 57

SD14050MHAN. . . 59

SD14050MHAZ1 . . 59

SD14050MHAZT. . 60

SD14065MHA . . . . 57

SD14065MHAN. . . 59

SD14065MHAZ3 . . 59

SD14065MHAZT. . 60

SD14090MHB . . . 57

SD14090MHBN. . . 59

SD14115MHB . . . . 57

SD2000. . . . . . . . . . 48

SD4000. . . . . . . . . . 48

SDB12 . . . . . . . . . . 48

SDM05022. . . . . . . 24

SDM06030. . . . . . . 24

SDM06030SS . . . . 24

SDM06050. . . . . . . 24

SETASP . . . . . . . . . 63

SETCW . . . . . . . . . 27

SETDS1 . . . . . . . . . 18

SETDS2 . . . . . . . . . 18

SETDS3 . . . . . . . . . 18

SETDS4 . . . . . . . . . 18

SETDS5 . . . . . . . . . 18

SETDS6 . . . . . . . . . 18

SETES . . . . . . . . . . 48

SETHWG . . . . . . . . 66

SETHWP . . . . . . . . 66

SETSA4 . . . . . . . . . 18

SLCTGYL20 . . . . . . 44

SLCTGYL4 . . . . . . . 44

SLCTGYL8 . . . . . . . 44

SLCTWHL20 . . . . . 44

SLCTWHL4 . . . . . . 44

SLCTWHL8 . . . . . . 44

SN06010YHT . . . . . 61

SN06020YBT . . . . . 49

SN06025PBT. . . . . 49

SN06025YBT . . . . . 49

SN06025YBTC. . . . 49

SN06030YBT . . . . . 49

SN06035YBT . . . . . 49

SN06041YBT . . . . . 49

SN07020YBF . . . . . 49

SN07020YPT . . . . . 61

SN07025YBF . . . . . 49

SN07028YBF . . . . . 49

SN07030YBF . . . . . 49

SN07035YBF . . . . . 49

SN07041YBF . . . . . 49

SN07045YBT . . . . . 49

SN07051YBT . . . . . 49

SN07057YBT . . . . . 49

SN08012MHT . . . . 61

SN08012MHTS . . . 61

SN08012YHT . . . . . 61

SN08012YHTS. . . . 61

SN08012YLT . . . . . 52

SN08016MHT . . . . 61

SN08016MHTS . . . 61

SN08016YHT . . . . . 61

SN08016YHTS. . . . 61

SN08016YLT . . . . . 52

SN08020YLT . . . . . 52

SN08020YST . . . . . 50

SN08025YLT . . . . . 52

SN08030YST . . . . . 50

SN08032YHTS. . . . 61

SN08032YLT . . . . . 52

SN08040YLT . . . . . 52

SN08045YBF . . . . . 49

SN08050YBF . . . . . 49

SN08057YBF . . . . . 49

SN08065YBT . . . . . 49

SN08075YBF . . . . . 49

SN08075YBT . . . . . 49

SN10020MHT . . . . 61

SN10020MHTN. . . 61

SN10020YHT . . . . . 61

SN10038YBF . . . . . 49

SN10100YBT . . . . . 49

SS04006ZPB . . . . . 62

SS04012ZFB . . . . . 61

SS04012ZPB . . . . . 62

SS04016ZFB . . . . . 61

SS04020ZFB . . . . . 61

SS05016ZFB . . . . . 61

SS06006ZPB . . . . . 62

SS06010SPB . . . . . 62

SS06010ZPB . . . . . 62

SS06012SFB . . . . . 61

SS06012SPB . . . . . 62

SS06012ZFB . . . . . 61

SS06012ZPB . . . . . 62

SS06016SPB . . . . . 62

SS06016ZFB . . . . . 61

SS06016ZPB . . . . . 62

SS06020SFB . . . . . 61

SS06020SPB . . . . . 62

SS06020ZFB . . . . . 61

SS06020ZPB . . . . . 62

SS06025SFB . . . . . 61

SS06025SPB . . . . . 62

SS06025ZFB . . . . . 61

SS06025ZPB . . . . . 62

SS06030SFB . . . . . 61

SS06030SPB . . . . . 62

SS06030ZFB . . . . . 61

SS06030ZPB . . . . . 62

SS06038SFB . . . . . 61

SS06038SPB . . . . . 62

SS06038ZFB . . . . . 61

SS06038ZPB . . . . . 62

SS06050ZFB . . . . . 61

SS08010SPB . . . . . 62

SS08010ZPB . . . . . 62

SS08010ZUB . . . . . 62

SS08012SFB . . . . . 61

SS08012SPB . . . . . 62

SS08012SUB. . . . . 62

SS08012ZPB . . . . . 62

SS08016SPB . . . . . 62

SS08016ZFB . . . . . 61

SS08016ZPB . . . . . 62

SS08016ZUB . . . . . 62

SS08020SFB . . . . . 61

SS08020SPB . . . . . 62

SS08020ZFB . . . . . 61

SS08020ZPB . . . . . 62

SS08020ZUB . . . . . 62

SS08025SFB . . . . . 61

SS08025SPB . . . . . 62

SS08025ZFB . . . . . 61

SS08025ZPB . . . . . 62

SS08030SFB . . . . . 61

SS08030SPB . . . . . 62

SS08030ZFB . . . . . 61

SS08030ZPB . . . . . 62

SS08038SFB . . . . . 61

SS08038SPB . . . . . 62

SS08038ZFB . . . . . 61

SS08038ZPB . . . . . 62

SS08045ZFB . . . . . 61

SS08045ZPB . . . . . 62

SS08050SFB . . . . . 61

SS08050SPB . . . . . 62

SS08050ZFB . . . . . 61

SS08050ZPB . . . . . 62

SS10012SPB . . . . . 62

SS10012SUB. . . . . 62

SS10012ZPB . . . . . 62

SS10012ZUB . . . . . 62

SS10016ZFB . . . . . 61

SS10016ZPB . . . . . 62

SS10020ZFB . . . . . 61

SS10020ZPB . . . . . 62

SS10025SFB . . . . . 61

SS10025SPB . . . . . 62

SS10025ZFB . . . . . 61

SS10025ZPB . . . . . 62

SS10030SFB . . . . . 61

SS10030SPB . . . . . 62

72

Product Code IndexALPHABETICAL CODES


73

Product Code Index

SS10030ZFB . . . . . 61

SS10030ZPB . . . . . 62

SS10038SFB . . . . . 61

SS10038SPB . . . . . 62

SS10038ZFB . . . . . 61

SS10038ZPB . . . . . 62

SS10050SFB . . . . . 61

SS10050ZFB . . . . . 61

SS10050ZPB . . . . . 62

SS10065ZFB . . . . . 61

SS10065ZPB . . . . . 62

SS12020ZPB . . . . . 62

SS12030ZPB . . . . . 62

SSMP. . . . . . . . . . . 46

ST06025YFA . . . . . 53

ST08020YFA . . . . . 53

ST08020YPA . . . . . 53

ST08025YFA . . . . . 53

ST08025YPA . . . . . 53

ST08030YFA . . . . . 53

ST08030YSA . . . . . 50

ST10020MHA . . . . 54

ST10020MHAN. . . 58

ST10020YHA . . . . . 54

ST10020YLAT . . . . 53

ST10025MHA . . . . 54

ST10025MHAN. . . 58

ST10025MWA. . . . 53

ST10025YHA . . . . . 54

ST10025YLAT . . . . 53

ST10025YWA . . . . 53

ST10030YFA . . . . . 53

ST10035YWA . . . . 53

ST10040YFA . . . . . 53

ST10040YLAT . . . . 53

ST10045YWA . . . . 53

ST10050YFA . . . . . 53

ST10060YFA . . . . . 53

ST10075YFA . . . . . 53

ST12025MHA . . . . 54

ST12025MHAN. . . 58

ST12025YHA . . . . . 54

ST12030YHA . . . . . 54

ST12040MHAF . . . 54

ST12045MHA . . . . 54

ST12045MHAN. . . 58

ST12045MHAP . . . 58

ST12045YHA . . . . . 54

ST12050MHA . . . . 54

ST12050MHAG . . . 58

ST12050MHAN. . . 58

ST12050MHAP . . . 58

ST12050YHA . . . . . 54

ST12065MHA . . . . 54

ST12065MHAG . . . 58

ST12065MHAN. . . 58

ST12065YHA . . . . . 54

ST14025MHA . . . . 54

ST14025MHAN. . . 58

ST14025YHA . . . . . 54

ST14050GBA. . . . . 53

ST14050MHA . . . . 54

ST14050MHAN. . . 58

ST14050MHAZ1 . . 58

ST14050MHAZ3 . . 58

ST14050MHAZC . . 60

ST14050YBAH. . . . 53

ST14065MHA . . . . 54

ST14065MHAN. . . 58

ST14065MHAZ1 . . 58

ST14065MHAZC . . 60

ST14065MHAZT . . 60

ST14075GBA. . . . . 53

ST14075MHA . . . . 54

ST14075MHAN. . . 58

ST14075SBAH. . . . 53

ST14075YBAH. . . . 53

ST14075YHA . . . . . 54

ST14090MHA . . . . 54

ST14090MHAN. . . 58

ST14090YHA . . . . . 54

ST14100GBA. . . . . 53

ST14100MHA . . . . 54

ST14100MHAN. . . 58

ST14100SBAH. . . . 53

ST14100YBAH. . . . 53

ST14115MHA . . . . 54

ST14115MHAN. . . 58

ST14150MHA . . . . 54

ST14150MHAN. . . 58

STBDL1 . . . . . . . . . 43

STF05050 . . . . . . . . 67

STF05075 . . . . . . . . 67

STK05050. . . . . . . . 67

STQ05050 . . . . . . . 67

STR04050. . . . . . . . 67

STR05050. . . . . . . . 67

STR05075. . . . . . . . 67

STR05100. . . . . . . . 67

STRIKER . . . . . . . . . 6

SVGPL4 . . . . . . . . . 46

SW12065DFA . . . . 54

SW12068SFA . . . . 54

T

T06045 . . . . . . . . . . 15

T06045SS. . . . . . . . 15

T06055 . . . . . . . . . . 15

T06055SS. . . . . . . . 15

T06085 . . . . . . . . . . 15

T06085SS. . . . . . . . 15

T06120 . . . . . . . . . . 15

T08050 . . . . . . . . . . 15

T08050SS. . . . . . . . 15

T08065 . . . . . . . . . . 15

T08065GH . . . . . . . 15

T08065SS. . . . . . . . 15

T08080 . . . . . . . . . . 15

T08090 . . . . . . . . . . 15

T08090SS. . . . . . . . 15

T08130 . . . . . . . . . . 15

T08130SS. . . . . . . . 15

T10065 . . . . . . . . . . 15

T10065SS. . . . . . . . 15

T10075 . . . . . . . . . . 15

T10075GH . . . . . . . 15

T10075SS. . . . . . . . 15

T10090 . . . . . . . . . . 15

T10090GH . . . . . . . 15

T10090SS. . . . . . . . 15

T10120 . . . . . . . . . . 15

T10120SS. . . . . . . . 15

T12080 . . . . . . . . . . 15

T12080GH . . . . . . . 15

T12080SS. . . . . . . . 15

T12100 . . . . . . . . . . 15

T12100GH . . . . . . . 15

T12100SS. . . . . . . . 15

T12120 . . . . . . . . . . 15

T12140 . . . . . . . . . . 15

T12140GH . . . . . . . 15

T12140SS. . . . . . . . 15

T12180 . . . . . . . . . . 15

T12180GH . . . . . . . 15

T12180SS. . . . . . . . 15

T16100 . . . . . . . . . . 15

T16100GH . . . . . . . 15

T16100SS. . . . . . . . 15

T16125 . . . . . . . . . . 15

T16125GH . . . . . . . 15

T16125SS. . . . . . . . 15

T16150 . . . . . . . . . . 15

T16150GH . . . . . . . 15

T16150SS. . . . . . . . 15

T16175 . . . . . . . . . . 15

T16175GH . . . . . . . 15

T16175SS. . . . . . . . 15

T16220 . . . . . . . . . . 15

T20120 . . . . . . . . . . 15

T20120GH . . . . . . . 15

T20120SS. . . . . . . . 15

T20160 . . . . . . . . . . 15

T20160GH . . . . . . . 15

T20160SS. . . . . . . . 15

T20215 . . . . . . . . . . 15

T20215GH . . . . . . . 15

T24175 . . . . . . . . . . 15

T24260 . . . . . . . . . . 15

TCM10RSS . . . . . . 29

TCM12RSS . . . . . . 29

TCM16RSS . . . . . . 29

TCM20RSS . . . . . . 29

TCM24RSS . . . . . . 29

TFE06 . . . . . . . . . . . 15

THH6800 . . . . . . . . 67

TM16 . . . . . . . . . . . 66

TM40 . . . . . . . . . . . . 6

TNF425. . . . . . . . . . 25

TNF438. . . . . . . . . . 25

TNF450. . . . . . . . . . 25

TNF475. . . . . . . . . . 25

TNL325. . . . . . . . . . 25

TNM320. . . . . . . . . 25

TNM325. . . . . . . . . 25

TNM325SS . . . . . . 25

TNM425. . . . . . . . . 25

TNM425SS . . . . . . 25

TNM438. . . . . . . . . 25

TNM450. . . . . . . . . 25

TNM475. . . . . . . . . 25

TNR325 . . . . . . . . . 25

TNR325SS . . . . . . . 25

TNR338 . . . . . . . . . 25

TNR425 . . . . . . . . . 25

TNR438 . . . . . . . . . 25

TNR450 . . . . . . . . . 25

TS60P. . . . . . . . . . . . 6

TS750P. . . . . . . . . . . 6

U

UP0610. . . . . . . . . . 28

UP1014. . . . . . . . . . 28

V

VF1 . . . . . . . . . . . . . 67

W

WB1416 . . . . . . . . . 60

WB1419 . . . . . . . . . 60

WB1425 . . . . . . . . . 60

WF12 . . . . . . . . . . . 60

WM25 . . . . . . . . . . 66

WMZ . . . . . . . . . . . 66

WP14CO . . . . . . . . 60

WP14TD . . . . . . . . 60

WPBU25 . . . . . . . . 28

WPBU38 . . . . . . . . 28

WPBU50 . . . . . . . . 28

WPGR25 . . . . . . . . 28

WPGR32 . . . . . . . . 28

WPGR38 . . . . . . . . 28

WPGR50 . . . . . . . . 28

WPRD25 . . . . . . . . 28

WPRD32 . . . . . . . . 28

WPRD38 . . . . . . . . 28

WPRD50 . . . . . . . . 28

WPWH25. . . . . . . . 28

WPWH38. . . . . . . . 28

WRSTRG300 . . . . . 43

WRSLWHG300 . . . 43

WS08 . . . . . . . . . . . 60

WS10 . . . . . . . . . . . 60

WS12 . . . . . . . . . . . 60

WS14 . . . . . . . . . . . 60

WS14CO . . . . . . . . 60

WS14KL. . . . . . . . . 60

WS14TD . . . . . . . . 60

X

XMR110 . . . . . . . . . 48

ALPHABETICAL CODES


INDEX 1 []

Documents

Transcript of INDEX 1 []