Increased benefits, lower costs. - liftec.com
4
The Linde RX60 series is ideal for every manufacturing, storage and distribution, and forwarding business where there is a need for high performance trucks without emissions. With annual sales exceeding 100,000 forklift trucks, Linde ranks among the world's leading manufacturers. This position has been justly earned. Linde trucks excel not only with their recognized innovative technology but especially due to their low energy and operating costs. High quality in production is matched by the standard of the services we provide. With our ten manufacturing plants and a comprehensive network of local partners, we are at your call around the clock and around the world. Your local Linde dealer offers a complete single-source package including qualified pre-sales consulting, after-sales service and flexible finance options—whether leasing, renting or purchasing. Linde Material Handling North America Corporation 2450 West 5th North Street, Summerville, SC 29483 Phone: 843.875.8000 . Truck Sales Fax: 843.875.8471 E-mail: [email protected] . www.lmh-na.com ANSI CLASSIFICATION: Standard truck meets all applicable mandatory requirements of ANSI/ITSDF B56.1 standards for powered industrial trucks. NOTE: Performance data may vary due to motor and system efficiency tolerances. The performance depicted represents nominal values obtained under typical operating conditions. Metric dimensions are in millimeters unless otherwise specified. All metric dimensions are not direct equivalents due to rounding data. The descriptions and specifications included on this data sheet were in effect at the time of printing. Linde Material Handling North America Corporation reserves the right to make improvements and changes in specification or design without notice and without incurring obligation. Please check with your authorized Linde dealer for information on possible updates or revisions. linde_brochure_rx60_v03_1010 USA_PUB_1010 Increased benefits, lower costs. Linde RX60 Series. RX60-25C & 30C, RX60-25L, 30L & 35, RX60-40, 45 & 50 Capacity 5,000 to 10,000 lb.
Transcript of Increased benefits, lower costs. - liftec.com
The Linde RX60 series is ideal for every manufacturing, storage and distribution, and forwarding business where there is a need for high
performance trucks without emissions.
With annual sales exceeding 100,000 forklift trucks, Linde ranks among the world's leading manufacturers. This position has been justly
earned. Linde trucks excel not only with their recognized innovative technology but especially due to their low energy and operating
costs.
High quality in production is matched by the standard of the services we provide. With our ten manufacturing plants and a comprehensive
network of local partners, we are at your call around the clock and around the world.
Your local Linde dealer offers a complete single-source package including qualified pre-sales consulting, after-sales service and flexible
finance options—whether leasing, renting or purchasing.
Linde Material Handling North America Corporation2450 West 5th North Street, Summerville, SC 29483Phone: 843.875.8000 . Truck Sales Fax: 843.875.8471E-mail: [email protected] . www.lmh-na.com
ANSI CLASSIFICATION: Standard truck meets all applicable mandatory requirements of ANSI/ITSDF B56.1 standards for powered industrial trucks.NOTE: Performance data may vary due to motor and system efficiency tolerances. The performance depicted represents nominal values obtained under typical operating conditions. Metric dimensions are in millimeters unless otherwise specified. All metric dimensions are not direct equivalents due to rounding data. The descriptions and specifications included on this data sheet were in effect at the time of printing. Linde Material Handling North America Corporation reserves the right to make improvements and changes in specification or design without notice and without incurring obligation. Please check with your authorized Linde dealer for information on possible updates or revisions. lin
de_b
roch
ure_
rx60
_v03
_101
0U
SA_P
UB_
1010
Increased benefits, lower costs.Linde RX60 Series.RX60-25C & 30C, RX60-25L, 30L & 35, RX60-40, 45 & 50
Capacity 5,000 to 10,000 lb.
Unmatched Performance3 High residual capacity
3 Fast acceleration
3 12 mph travel speed (laden and empty)
3 Automatic power boost function
3 Fully programmable hydraulic functions
3 100 fpm lift speed
Ergonomic Excellence3 Adjustable steering column
3 Low noise level (68 dba)
3 High comfort, full suspension seat
3 Floating operator compartment
3 Ergonomically designed floor board
3 Armrest with hydraulic mini levers
3 Display of critical information
Durability By Design3 Cast ductile iron steering axle with shock
mounting
3 Electronic components protected inside
counterweight
3 Three phase AC travel and hydraulics
3 Thermo-sensor — motor protection
3 On-board diagnostics
Advantage 80 Volts3 Comparable performance to LP and diesel
powered forklifts
3 Large battery compartments, fitting standard
and vented batteries
3 80 volts efficiency, prerequisite for fast charge
systems (optional)
With Linde you get ...
RX60-25C and RX60-30C
RX60-25L, RX60-30L, RX60-35
Power and strength inside and out. The customer driven design of Linde’s high performance electric trucks make them versatile and effective even in uncommon applications.
The RX60 series electric trucks have been designed by constantly analyzing customer applications and by adapting to changing design requirements, needs, and requests. Linde will make every effort to develop and apply technology by designing and manufacturing safer, more productive, and more durable forklifts.
Innovation is the foundation of our success.
Over 400 employees in our research and development group assure continuous product improvement and development of new technologies.
Safety 3 Side battery discharge
3 Optimized visibility mast
3 Ramp start assist
3 Programmable performance
3 Available interlocks (optional)
3 “Quick set” parking brake
3 Armrest mounted horn button (optional)
Versatile & Energy Efficient3 Indoor/outdoor operation
3 Full operator cab (optional)
3 Electric heating system (optional)
3 Cold environment operation to -22 F (optional)
3 Energy return system
3 Heat management design
3 Automatic performance adaptation - save
energy with "Blue Zone"
Lowest Maintenance & Operating Cost 3 1000 hour periodic maintenance intervals
3 Easy component access
3 Adjustable automatic deceleration
3 Dual, independent CAN-bus diagnostic systems
3 Long-life multi-disc brakes
RX60-40 shown
Seven good reasons for choosing Linde material handling equipment:
3Unmatched Performance
3Ergonomic excellence
3Durability by design
3 Advantage 80 volts
3Safety
3Versatility
3 Low maintenance
... more than what you see.
Mast: Optimized Visibility
Floating Operator Compartment
AC Technology
Cast Steering AxleSide Battery Discharge
