Inca Onset - Fujifilm USA

4
FUJIFILM North America Corporation, Graphic Systems Division 913.342.4060 [email protected] www.fujifilmsericol.com High quality, short-run digital printing high quality short-run digital printing INCA ONSET Inca Onset: • Print Speeds up to 10,764 ft 2 /hr • Production Throughput of 6,458 ft 2 /hr • Shuttling bed design for maximum productivity • Double sided printing in precise registration • Fully automatic, semi-automatic, and manual material options • Choice of finish (satin or gloss) Simply put, Onset is the fastest digital wide format press in the world. Onset was designed primarily for the point of purchase display graphics market. Capable of producing in excess of 125 beds per hour, Onset dramatically alters the competitive landscape for commercial printing and is cost competitive with both screen and offset printers. Onset's high speed inkjet capability is unparalleled. With a massive array of 576 printheads and more than 73,000 nozzles, Onset jets over 3 billion droplets of ink per second. The full-width array results in print speeds of over 10,000 square feet per hour but still produces exceptional print quality with no banding, smooth gradients and clean, sharp edges. Onset achieves quality and speeds no one else can reach. Full vacuum table 10,764 ft2/hr. maximum print speed 126" x 60" image size Uvijet UV-curing inks (CMYK) Inca Onset A Breakthrough in Digital Printing

Transcript of Inca Onset - Fujifilm USA

Page 1: Inca Onset - Fujifilm USA

913.342.4060 [email protected] www.fujifilmsericol.com FUJIFILM North America Corporation, Graphic Systems Division 913.342.4060 [email protected] www.fujifilmsericol.com

High quality, short-rundigital printing

high quality short-run digital printingINCA ONSET

Inca Onset:

• Print Speeds up to 10,764 ft2/hr

• Production Throughput of 6,458 ft2/hr

• Shuttling bed design for maximum productivity

• Double sided printing in precise registration

• Fully automatic, semi-automatic, and manual material options

• Choice of finish (satin or gloss)

Simply put, Onset is the fastest digital wide format press in the world. Onset was

designed primarily for the point of purchase display graphics market. Capable of

producing in excess of 125 beds per hour, Onset dramatically alters the competitive

landscape for commercial printing and is cost competitive with both screen and

offset printers.

Onset's high speed inkjet capability is unparalleled. With a massive array of 576

printheads and more than 73,000 nozzles, Onset jets over 3 billion droplets of ink

per second. The full-width array results in print speeds of over 10,000 square feet

per hour but still produces exceptional print quality with no banding, smooth

gradients and clean, sharp edges. Onset achieves quality and speeds no one else

can reach.

Full vacuum table

10,764 ft2/hr. maximum print speed

126" x 60" image size

Uvijet UV-curing inks (CMYK)

Inca OnsetA Breakthrough inDigital Printing

Page 2: Inca Onset - Fujifilm USA

A Breakthrough in Digital PrintingThe adoption of UV inkjet ink technology has provided the print industry with a cost-effective method for producing high quality Point of Purchase display graphics and signage. Having pioneered the development of UV digital flatbed printers, Fujifilm and Inca Digital continue to innovate in terms of productivity and image quality.

PRODUCTIVITY

EASE OF USE APPLICATION

FLEXIBILITY RELIABILITY

Higher output speeds satisfy the needs of screen

and o set printers.

ECONOMICS

Provides the most cost e ective solution

for press runs from 1 to 500+

Limited operator involvement, with

simple material andsize changeover.

Versatile digital printing - from one-o s to fully automatic handling.

Printing onto materials up to

0.39” thick, with a maximum image area

of 126“ x 60” in perfect registration.

Inca Digital’s engineering expertise and backup,

plus Fuji�lm Sericol’s ink formulation experience.

The combination of Inca Digital's engineering and imaging expertise with Fujifilm Sericol's experience of UV ink formulation results in innovative print solutions which deliver the highest return on investment through:

• High print speeds

• Excellent image quality

• World class reliability and performance

Page 3: Inca Onset - Fujifilm USA

World's Fastest Digital PressImagine producing a production quality print on a 10.5 x 5 foot bed in under 30 seconds. The automated Inca Onset delivers an exceptional 125+ full bed sheets (or 360 3' x 5' posters) an hour. In addition, edge-to-edge printing allows Onset to bleed on substrates up to 0.4" thick and up to 22 pounds at full speed, providing enormous versatility in terms of what can be printed as well as the ability to proof a job on the material on which it will finally be produced. For all its sophistication, Onset is extremely easy to operate by one operator, with minimal set up time at the start of each day.

Print-headarray–24printmoduleswith24FUJIFILMDimatixSpectraprintheadspermoduleforatotalof576printheads.

Key Features of FUJIFILM Sericol Uvijet• Improved cure performance – no loss of adhesion at high

print speeds.

• Improved finishing properties – the ink film is less prone to edge chipping when prints are guillotined, routed or folded.

• Improved adhesion to polystyrene, foam PVC and semi-rigid PVC.

• Multi-substrate performance for indoor and outdoor applications for up to two years.

• Less prone to curl on thin gauge PVC than other UV inkjet ink systems.

• Variable print finish increases application range.

FUJIFILM Sericol Uvijet UV curable inks are specifically formulated to match the productivity and expected application range for the Inca Onset. Uvijet inks deliver vibrant colors and durability for both internal and external applications.

Uvijet Ink for OnsetThe use of Micro-V dispersion technology maximizes pigment loading in Uvijet inks to achieve high color strength while maintaining ink stability. The ultra-fine dispersion technique creates a smaller particle size, which prevents filter blockage and doesn't adversely affect print heads.

UvijetinksfortheIncaOnsetaresuppliedin5kgboxeswhichensuresquick,cleanandsimplechangeover,withnodowntime.

THE ADVANTAGE

Page 4: Inca Onset - Fujifilm USA

FUJIFILM North America Corporation, Graphic Systems Division 913.342.4060 [email protected] www.fujifilmsericol.com

Material HandlingFULLY AUTOMATIC OR MANUALThe Inca Onset is equipped with a fully automatic material handling system for maximum production efficiency. But recognizing the fact that not all material printed will be a standard format size or thickness, the print bed is immediately accessible – maximizing versatility.

PRINT ACCURACY AND RELIABILITYThe Inca Onset is configured to produce the highest print quality. It has 24 print modules each containing 24 FUJIFILM Dimatix Spectra print heads (CMYK). A built-in automatic head cleaning station ensures consistent quality and simple ease of use.

CURINGThe Uvijet UV inks are cured instantly by a dual lamp system. This ensures that the inks are fully cured using the lowest energy levels possible per media type, and the print finish can be adjusted for satin or gloss.

APPLICATION RANGEThe Inca Onset can be used for a wide variety of applications, including:

• Point of Purchase displays

• Exhibition graphics

• Backlit displays

• Outdoor signage

• Lenticular 3D printing

Print Area• 126" x 60"

Substrate Thickness• .39" with Automatic

• .60" with Manual

Physical Characteristics• Power Supply

• Printer – 380-420V AC, 3-phase

• AutoSpeed unloader – 415V AC, 3-phase positive

• Dimensions

• Width – 33'5"

• Length – 42'2"

• Height – 6'8"

• Space Requirement – 70' x 43'

• Approximate Weight

• Printer – 26,455 lbs

• AutoSpeed unloader – 5,512 lbs

Factory Air Requirement• Printer – 90psi

• AutoSpeed unloader – 50psi

RIP• ColorGATE Production Server (Fujifilm or Inca Edition),

Version 5.3 or later

• Wasatch SoftRIP® v6.3 or higher

Machine Features• Printing Systems

• Technology – Piezo drop-on-demand inkjet

• Process – 4 color, CMYK

Print Modules• 24 (6 per color)

* Subjecttochangeascontinuedoptimizationoccurs.

SPECIFICATIONS:

Production Throughput Speed ft2/hr.

Standard – satin 6,458

Quality – satin 5,424

Standard – gloss 5,100

Quality – gloss 4,520

Theautofeederallowsthepresstorununattended.Thisoptimizesoperatorproductivityandreduceslaborcostsforlongerruns.