IMT-2020 (Fifth Generation) - USER EQUIPMENT · 2020. 7. 23. · i. PVC insulated - flexible cord =...

Public Engagement on Draft

Technical Code

MTSFB2003R0

IMT-2020 (Fifth Generation)

- USER EQUIPMENT

22 July 2020, Wednesday

10.00 am

Presented by Mr Fazli Shamsuddin

Let’s collaborate @ MTSFB!

Outlines

1

2

3

Background

Objective & Benefit

Scope

2

4 Requirements

5 Technical Code Development Progress

6 Acknowledgement


1 BACKGROUND

3

Let’s collaborate @ MTSFB!4

Fixed and Wireless Terminal Working Group

(FWT)

STRUCTURE OF WORKING GROUP

5G UE Sub-Working Group (5G UE SWG)

Technical Code for 5G User Equipment

Technical Code for 5G Base Station

tasked to develop


TECHNICAL CODES FOR IMT SYSTEMS USER EQUIPMENT

3G 4G 5G

Published in 2007 Published in 2017 Target to publish in 2020


2 OBJECTIVE & BENEFIT

6


OBJECTIVE OF TECHNICAL CODE DEVELOPMENT

• Communications and Multimedia Act1998, section 185 Act 588

• Communications and Multimedia (Technical Standards)

Regulations 2000

Pursuant to Act & Regulations

• General and technical specification for certifying IMT-2020 (5G)

user equipment (UE) to be used in Malaysia

Certification of Equipment


BENEFIT OF TECHNICAL CODE

• Provide specification and guideline to manufacturers and importers on UE compliance to regulations and standards

• Ensure compliance of UE to standards

• Ensure compatibility of UE with local network and other

equipments

• Protect consumer from sub-standard or faulty products

Stakeholders

• MCMC

• Public and End User of UE• Manufacturer and importer of UE

• Telecommunications service provider

• Certifying agency

Benefits


WHAT IF THERE’S NO TECHNICAL CODE?

01

02

03

04Pose safety &

health hazard

to users

Compromise

the quality of

service from

service

providers

Interference risk to

telecommunication

services

UE purchased

might be

counterfeit/clone

products


3 SCOPE

10


SCOPE

11

IMT-2020 (FIFTH GENERATION) - USER EQUIPMENT

This technical code specifies the minimum requirement for

User Equipment (UE) that is intended for use in connection with

IMT-2020 public mobile telecommunications service in

Malaysia. The UE may include, but not limited to, cellular

mobile terminals, handheld, portable and vehicle-mounted

equipment, and Radio Frequency (RF) interface cards and

modems.

This Technical Code applies to IMT-2020 (Fifth Generation) 5G

UE based on the following technologies as specified in the

following documents:

a) MTSFB2002R0

b) IR.92 (at least V13.0)

Document has completed Public

Comment & is under Reference Panel

review for submission to Commission


SCOPE (Continued)

Examples of 5G User Equipment

Mobile Phones Notebooks &

Tablet PCs

Wireless Routers


4 REQUIREMENTS

13


CONTENT OF TECHNICAL CODE

SCOPE, NORMATIVE REFERENCES & ABBREVIATION

GENERAL REQUIREMENTS • Power supply

• Cord & mains plug

• Keypad

• Interoperability & Connectivity

• Marking

TECHNICAL REQUIREMENTS

• Radio Frequency (RF)

• Electromagnetic Compatibility (EMC)

• Safety & Health

• Electrical safety

• Electromagnetic Field (EMF)

exposure – SAR & PD


GENERAL REQUIREMENTS (1/2)

• Power Supply

• AC adaptor operating voltage 240V +5% -10% and frequency 50Hz ± 1%

• In accordance to MS 406 or MS IEC 60038

• Adaptor shall be pre-approved by relevant Regulatory Body

Specify the requirements for the following items:

• Power Supply Cord & Mains Plug

• In line with requirements by Suruhanjaya Tenaga

• Power supply cord conformance:

i. PVC insulated - flexible cord = MS 2112-5 or BS 50525-2-11 or IEC 60227-5

ii. Rubber insulated – flexible cord = MS 2127-4 or IEC 60245-1

• Mains plug conformance:

i. 13A fused plug = MS 589-1 or BS 1363

ii. 15A fused plug = MS 1577

iii. Flat non-rewireable 2-pole plug = MS 1578 or BS EN 50075

Refer Information Booklet on Approval of Electrical

Equipment by Suruhanjaya Tenaga


GENERAL REQUIREMENTS (2/2)

• Keypad

• Shall be alphanumeric and relationship between letters and digits

shall comply to items 2.2, 3.1.1 and 3.6 of ITU-T E.161(02/2001)

Specify the requirements for the following items:

• Interoperability & Connectivity

• Interoperability and connectivity with local network shall be demonstrated

• Marking

• Marking on equipment shall contain the following information:

i. Supplier/manufacturer’s name or identification mark,

ii. Supplier/manufacturer’s model or type reference, and

iii. Other markings as required by relevant standard

• Shall be legible, indelible and readily visible

• Shall have marking in either Bahasa Melayu or English


TECHNICAL REQUIREMENTS (1/4)

• RADIO FREQUENCY• 5G UE shall operate within the following frequency bands:

• In addition, 5G UE may operate in other existing bands identified

in Malaysian IMT systems

• 5G UE is recommended to support both NSA and SA mode

Specify the requirements for the following scopes:



• RADIO FREQUENCY (CONTINUED)

• Standard conformance(one or more):

i. 3GPP TS 38.101-1 Release 15;

ii. ETSI TS 138 101-1, -2, and/or -3;

iii. ETSI TS 138 521-1, -2 and/or -3; and/or

iv. ETSI EN 301 908-25 (draft)

For Voice over NR (VoNR) or V05G, shall comply to the

requirements of IR.92 (at elast version 13)

• If the 5G UE support other technologies, shall meet the respective

Technical Codes or Class Assignments




• EMC• Standard conformance:

i. EN 301 489-1; or

ii. EN 301 489-52

• For mobile phones, its adaptor shall comply with:

i. EN 301 489-34; or

ii. Any equivalent standard




• SAFETY

AND

HEALTH


ELECTRICAL SAFETY

ELECTROMAGNETIC FIELD

(EMF) EXPOSURE

SPECIFIC ABSORPTION

RATE (SAR)

POWER DENSITY (PD)• Standard conformance:

i. MC IEC 60950-1; or

ii. IEC 62368-1; or

iii. Any equivalent standard

• EMF Exposure determination for 300 MHz

to 6 GHz

• Standard conformance:

i. BS EN 50360;

ii. IEC 62209-1;

iii. IEC 62209-2; and/or

iv. IEC 62311

• Shall comply to ICNIRP

and the following

standards for

measurement of:

• EMF Exposure determination for

above 6 GHz

• Standard conformance:

i. IEC TR 63170 and/or

ii. Any equivalent standard


5 TECHNICAL CODE DEVELOPMENT PROGRESS

21


REGISTRATION OF

NEW PROPOSAL

25/02/2020

DELIBERATION(6 SWG MEETINGS)

18/03/2020 – 18/06/2020

PUBLIC COMMENT (PC)06/07/2020 - 05/08/2020

Public Engagement:

22/07/2020

PC REVIEW11/08/2020

SUBMISSION TO

MCMC28/08/2020

We are here

TECHNICAL CODE DEVELOPMENT PROGRESS


6 ACKNOWLEDGEMENT

23


• Digi Telecommunications Sdn Bhd

• edotco Malaysia Sdn Bhd

• Huawei Technologies (Malaysia) Sdn Bhd

• Maxis Broadband Sdn Bhd

• Nokia Services and Solutions Sdn Bhd

• Redsun Engineering Sdn Bhd

• Rohde & Schwarz Malaysia Sdn Bhd

• SIRIM Berhad

• Sony EMCS Malaysia Sdn Bhd

• Telekom Malaysia Bhd

• U Mobile Sdn Bhd

• webe digital sdn bhd

• Wideminds Pte Ltd

• YTL Communications Sdn Bhd

• Hansway Solution Sdn Bhd

• ITS Testing Services (M) Sdn Bhd

THANK YOU FOR YOUR CONTRIBUTION!

IMT-2020 (Fifth Generation) - USER EQUIPMENT · 2020. 7. 23. · i. PVC insulated - flexible cord =...

Documents

Transcript of IMT-2020 (Fifth Generation) - USER EQUIPMENT · 2020. 7. 23. · i. PVC insulated - flexible cord =...