Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.
-
Upload
karly-seader -
Category
Documents
-
view
281 -
download
3
Transcript of Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.
![Page 1: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/1.jpg)
Sound Analysis of an Amphitheatre
![Page 2: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/2.jpg)
Importing Model to Ecotect Anaysis.
![Page 3: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/3.jpg)
.3ds geometry--Ecotect
![Page 4: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/4.jpg)
.3ds geometry--Ecotect
![Page 5: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/5.jpg)
Conclusion: Analysis will retard or take long time.
![Page 6: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/6.jpg)
Revit and Ecotect
Tag the object carefully in Revit for gbxml filetype!
![Page 7: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/7.jpg)
Revit model tagged as shaded part and untagged as un-shaded part.To import gbxml format from revit for analysis, whole part should be completely tagged
![Page 8: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/8.jpg)
Conclusion: Analysis will work but cylindrical geometry will be a mess as ecotect converts it into triangular components.
![Page 9: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/9.jpg)
Cylinder computed by Ecotect becomes more complex triangular geometry
Avoid Complex Geometry as far as possible.
![Page 10: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/10.jpg)
Carefully deleted the outer cylindrical from imported xml file and created cylinder surface on ecotect so that analysis is done smoothly.
More Simplified geometry for Ecotect Model
![Page 11: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/11.jpg)
Acoustical Analysis
![Page 12: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/12.jpg)
Set Sound Source and Reflectors (ceilings)
![Page 13: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/13.jpg)
Generate Rays
![Page 14: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/14.jpg)
Reflector position and orientation calculationAcoustical Analysis
![Page 15: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/15.jpg)
Trial 1Default
![Page 16: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/16.jpg)
Trial 1
12m
dia=30m
![Page 17: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/17.jpg)
Trial 1Default
12m
dia=30m
![Page 18: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/18.jpg)
Trial 1Default
12m
dia=30m
![Page 19: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/19.jpg)
Trial 1Default
dia=30m
12m
![Page 20: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/20.jpg)
Conclusion of Trial 1
• More REVEB sound was detected.• Hence need to modify
-Geometry -Orientation (incident angle etc.)
• Material quality is kept as default.• Hence parameters to control in the analysis
are Reflectors (ceilings) property.
![Page 21: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/21.jpg)
Trial 2Lowering ceiling
Decreased by 3m
9m
dia=30m
![Page 22: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/22.jpg)
Trial 2Lowering ceiling
Decreased by 3m
9m
dia=30m
![Page 23: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/23.jpg)
Decreased by 3m
Trial 2Lowering ceiling
9m
dia=30m
![Page 24: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/24.jpg)
Trial 3Increased by 3m
15m
dia=30m
![Page 25: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/25.jpg)
Trial 3
15m
dia=30m
![Page 26: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/26.jpg)
Conclusion of Trials 2 and 3
• As we change the heights of the ceiling, just above the stage, quality changes drastically
• As we lower more noise is observed• As we higher the ceiling good quality is
observed for same directed ray generated.
![Page 27: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/27.jpg)
Material assignment to the Reflectors at height of 12m
Acoustical Analysis
![Page 28: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/28.jpg)
Assigning all reflectors as Acoustical Tile.
![Page 29: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/29.jpg)
Table to feed different NRC Values
![Page 30: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/30.jpg)
Feeding different Absorptive value for different frequency.
![Page 31: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/31.jpg)
Adding Material-NRC.03
dia=30m
12m
![Page 32: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/32.jpg)
Adding Material-NRC.03
12m
dia=30m
![Page 33: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/33.jpg)
Adding Material-NRC.61
dia=30m
12m
![Page 34: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/34.jpg)
Adding Material-NRC.85
dia=30m
12m
![Page 35: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/35.jpg)
Conclusion of different NRC Values
• For Higher Noise Reduction Coefficients (NRC 0.6 and above) most of the sound waves are observed that leads to Dryness of Sound which seems to be bad of an amphitheatre.
• For lower NRC(0.3) we have variety of sound variation which is not desired
• Hence selected NRC 0.56 which is 12 mm Mineral Fiber Material which is also fire resistant.
![Page 36: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/36.jpg)
Adding Material-NRC.56
12m
dia=30m
![Page 37: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/37.jpg)
Adding Material-NRC.56
12m
dia=30m
![Page 38: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/38.jpg)
Results or Output from Ecotect Analysis.Acoustical Analysis
![Page 39: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/39.jpg)
Acoustical Response
![Page 40: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/40.jpg)
Sound Decay for different frequency
![Page 41: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/41.jpg)
Reverberation Graph
TOTAL SABINE NOR-ER MIL-SEFREQ. ABSPT. RT(60) RT(60) RT(60)------- -------- ------- ------- ------- 63Hz: 104.349 3.35 2.80 4.87125Hz: 110.039 3.21 2.70 1.70250Hz: 206.346 1.53 1.39 1.13500Hz: 519.030 0.86 0.68 0.57 1kHz: 579.543 0.80 0.60 0.49 2kHz: 485.506 0.86 0.71 0.62 4kHz: 390.240 1.04 0.90 0.82 8kHz: 390.551 1.02 0.90 0.8216kHz: 308.554 1.14 1.07 0.99
![Page 42: Importing Model to Ecotect Anaysis. .3ds geometry--Ecotect.](https://reader035.fdocuments.in/reader035/viewer/2022081417/5518ad0a550346881f8b4d64/html5/thumbnails/42.jpg)
STATISTICAL ACOUSTICS - 18 Room
Volume: 4070.390 m3Surface Area: 761.794 m2Occupancy: 680 (850 x 80%)Optimum RT (500Hz - Speech): 0.99 sOptimum RT (500Hz - Music): 1.65 s
Volume per Seat: 4.789 m3Minimum (Speech): 5.329 m3Minimum (Music): 9.129 m3
Most Suitable: Norris-Eyring (Highly absorbant)Selected: Sabine (Uniformly distributed)