IMPORTANT SAFETY INSTRUCTIONS - XtraLight€¦ · INSTALLATION THIS LUMINAIRE IS INTENDED FOR...
4
LED COMMERCIAL FLOOD (SMALL & MEDIUM) IMPORTANT SAFETY INSTRUCTIONS THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED. CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D’INSTALLATION PERTINENT, PAR UNE PERSONNE QUI CONNAÎT BIEN LE PRODUIT ET SON FONCTIONNEMENT AINSI QUE LES RISQUES INHÉRENTS. 1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS. 2. INSTALLATION REQUIRES KNOWLEDGE OF LED LIGHTING AND ELECTRICAL SYSTEMS. 3. THE LED LUMINAIRE MUST BE WIRED IN ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE AND APPLICABLE LOCAL CODES. 4. PROPER GROUNDING IS REQUIRED FOR SAFETY. 5. THIS LED LUMINAIRE MUST BE INSTALLED PER THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT. DO NOT ATTEMPT INSTALLATION IF THIS CONDITION IS NOT MET. CONTACT A QUALIFIED ELECTRICIAN. 6. DO NOT USE THIS LUMINAIRE FOR ANYTHING OTHER THAN ITS INTENDED USE. 7. DANGER-RISK OF FIRE OR ELECTRICAL SHOCK- DISCONNECT POWER BEFORE BEGINNING INSTALLATION.
Transcript of IMPORTANT SAFETY INSTRUCTIONS - XtraLight€¦ · INSTALLATION THIS LUMINAIRE IS INTENDED FOR...
LED COMMERCIAL FLOOD
(SMALL & MEDIUM)
IMPORTANT SAFETY INSTRUCTIONS
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH T HE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D’INSTA LLATION PERTINENT, PAR UNE PERSONNE QUI CONNAÎT BIEN LE PRODUIT ET SON FONCTIO NNEMENT AINSI QUE LES RISQUES INHÉRENTS.
1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
2. INSTALLATION REQUIRES KNOWLEDGE OF LED LIGHTING AND ELECTRICAL
SYSTEMS.
3. THE LED LUMINAIRE MUST BE WIRED IN ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE AND APPLICABLE
LOCAL CODES.
4. PROPER GROUNDING IS REQUIRED FOR
SAFETY.
5. THIS LED LUMINAIRE MUST BE INSTALLED PER THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT. DO NOT ATTEMPT INSTALLATION IF THIS CONDITION IS NOT MET. CONTACT A
QUALIFIED ELECTRICIAN.
6. DO NOT USE THIS LUMINAIRE FOR ANYTHING OTHER THAN ITS INTENDED
USE.
7. DANGER-RISK OF FIRE OR ELECTRICAL SHOCK-DISCONNECT POWER BEFORE BEGINNING INSTALLATION.
LED COMMERCIAL FLOOD
(SMALL & MEDIUM)
INSTALLATION THIS LUMINAIRE IS INTENDED FOR JUNCTION BOX OR POST MOUNTING ONLY.
1. Screw the LFL arm into a junction box or landscape post which has a ½” NPS hole.
2. Use the Locknut to secure the fixture.
3. Make all wiring connections in the junction box or landscape post per wiring instructions on following
page.
4. Loosen the Arm Bolt and aim the fixture to the desired angle. Angle Indicators are provided for
precise aiming.
5. Re-tighten the Arm Bolt.
6. Seal all unused holes and threads with weatherproof silicone grease.
Locknut
Arm Bolt
Angle Indicators
LED COMMERCIAL FLOOD
(SMALL & MEDIUM)
WIRING
Universal driver: 120V - 277V, 50/60HZ
1. Verify that the electrical power to the Luminaire is in the OFF position. 2. Connect the black lead to Line supply lead. 3. Connect the white lead to Neutral supply lead. 4. Connect the ground wire to Fixture ground. 5. Energize the electrical power and verify for proper operation.
LED COMMERCIAL FLOOD
(SMALL & MEDIUM)
DIMENSIONAL DATA
IN0003 Rev. 1 09/27/2016
