Important Carprog Hardware Modifications
2
All right reserved www.codecard.lt 1 Important CarProg hardware modifications Don’t forget to make these 4 CarProg hardware modifications: 1. Open CarProg and change resistor marked 2R2 to resistor 0R0 or simple bridge like in picture. This hardware modification will improve external power current checking (message “external power consumption is more than 500mA):
-
Upload
vag-corner -
Category
Documents
-
view
330 -
download
20
Transcript of Important Carprog Hardware Modifications
![Page 1: Important Carprog Hardware Modifications](https://reader036.fdocuments.in/reader036/viewer/2022082201/577cce101a28ab9e788d3418/html5/thumbnails/1.jpg)
All right reserved www.codecard.lt 1
Important CarProg hardware modifications
Don’t forget to make these 4 CarProg hardware modifications:
1. Open CarProg and change resistor marked 2R2 to resistor 0R0 or simple bridge like in picture. This hardware modification will improve external power current
checking (message “external power consumption is more than 500mA):
![Page 2: Important Carprog Hardware Modifications](https://reader036.fdocuments.in/reader036/viewer/2022082201/577cce101a28ab9e788d3418/html5/thumbnails/2.jpg)
All right reserved www.codecard.lt 2
2. Add two 1kOm resistors like in picture. This hardware modification will improve
M35080 EEPROM in-circuit programming:
3. With wire short 2 points on CarProg board like in picture. This hardware is
necessary for Opel ECU tool owners – some ECU will not work by K-line without
this update: