IMC IMC12-04BPPVC0SA00, Product data sheet...IMC12-04BPPVC0SA00 | IMC INDUCTIVE PROXIMITY SENSORS...

Pro

du

ct

da

ta s

he

et

IMC12-04BPPVC0SA00IMC

INDUCTIVE PROXIMITY SENSORS

ABCDEF

HIJKLMNOPQRST

IMC12-04BPPVC0SA00 | IMCINDUCTIVE PROXIMITY SENSORS

Illustration may differ

Ordering information

Type Part no.

IMC12-04BPPVC0SA00 1079286

Included in delivery: BEF-MU-M12N (2)

Other models and accessories www.sick.com/IMC

Detailed technical data

Features

Housing Cylindrical thread design

Thread size M12 x 1

Diameter Ø 12 mm

Sensing range Sn 0 mm ... 4 mm 1)

Safe sensing range Sa 3.24 mm

Number of switching points Up to 4 adjustable switching points or windows

Switching modes Single point, Window mode, Two point mode, Visual adjustment indicator

Switching frequency Qint.1 / Qint.2 on Pin2 1,000 Hz

Installation type Flush

Connection type Male connector M12, 4-pin 2)

Switching output PNP

Output Q/C Switching output or IO-Link mode

Output MFC Switching output or input

Output function NC / NO

Output characteristic Programmable

Electrical wiring DC 4-wire

Enclosure rating IP68 3)

IP69K 4)

Special features Smart Task, Resistant against coolant lubricants, IO-Link

Special applications Zones with coolants and lubricants, Difficult application conditions

1) Adjustable.2) With gold plated contact pins.3) According to EN 60529.4) According to ISO 20653:2013-03.

2 INDUCTIVE PROXIMITY SENSORS | SICK Product data sheet | 2020-08-05 21:43:42

Subject to change without notice

http://www.sick.com/1079286


https://www.sick.com/2103188

https://www.sick.com/IMC


Special characteristic Resistant against coolant lubricants

Diagnosis Chip temperature

Pin 2 configuration External input, Teach-in, switching signal

1) Adjustable.2) With gold plated contact pins.3) According to EN 60529.4) According to ISO 20653:2013-03.

Mechanics/electronics

Supply voltage 10 V DC ... 30 V DC 1)

Ripple ≤ 10 %

Voltage drop ≤ 2 V 2)

Current consumption 35 mA 3)

Hysteresis Programmable 4)

Reproducibility ≤ 5 % 5)

Temperature drift (of Sr) ± 10 %

EMC According to EN 60947-5-2

Continuous current Ia ≤ 200 mA 6)

Short-circuit protection ✔

Reverse polarity protection ✔

Power-up pulse protection ✔

Shock and vibration resistance 100 g / 2 ms / 500 cycles; 150 g / 1 Mio cycles; 10 Hz ... 55 Hz / 1 mm; 55 Hz ... 500 Hz /60 g

Ambient operating temperature –40 °C ... +75 °C

Housing material Stainless steel V2A, DIN 1.4305 / AISI 303

Sensing face material Plastic, LCP

Housing length 65 mm

Thread length 48 mm

Tightening torque, max. Typ. 32 Nm 7)

Items supplied Mounting nut, V2A stainless steel, with locking teeth (2x)

UL File No. E181493

Teach-in accuracy +/- 3% of Sr

Resolution, typical (range) 10 μm (0 mm ... 1 mm)20 μm (1 mm ... 3 mm)40 μm (3 mm ... 4 mm)

Resolution, maximum (area) 20 μm (0 mm ... 1 mm)40 μm (1 mm ... 3 mm)75 μm (3 mm ... 4 mm)

1) IO-Link mode: 18 VDC ... 30 VDC.2) At Ia max.3) Without load.4) To comply with EN 60947-5-2, a hysteresis of approx. 10% must be set.5) Ub and Ta constant.6) 200 mA total for both switching outputs.7) Valid if toothed side of nut is used.

2020-08-05 21:43:42 | Product data sheet


INDUCTIVE PROXIMITY SENSORS | SICK 3

ABCDEF

HIJKLMNOPQRST


Safety-related parametersMTTFD 860 years

DCavg 0%

Communication interfaceCommunication interface IO-Link V1.1

Communication Interface detail COM2 (38,4 kBaud)

Cycle time 5 ms

Process data length 32 Bit

Process data structure Bit 0 = switching signal QL1Bit 1 = switching signal QL2Bit 2 = switching signal QInt3Bit 3 = switching signal QInt4Bit 16 ... 31 = distance value

Factory setting Switching Point 1: reference value 1Output: normally openPin 2 configuration: input

Reference valuesNote Reference value in Digits for switching point in mm stored in the sensor

Reference value 1 4 mm




Reduction factorsStainless steel (V2A, 304) Approx. 0.7

Aluminum (Al) Approx. 0.4

Copper (Cu) Approx. 0.3

Brass (Br) Approx. 0.4

Installation noteRemark Associated graphic see "Installation"

B 12 mm

C 12 mm

D 12 mm

F 32 mm

Smart TaskSmart Task name Base logics

Logic function ANDORXORHysteresis

Timer function On delayOff delayON and OFF delay

1) SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to "direct"/"deacti-vated").2) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used.3) IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters.




Impulse (one shot)

Inverter Adjustable

Switching frequency SIO Direct: 1000 Hz 1)

SIO Logic: 1000 Hz 2)

IOL: 1000 Hz 3)

Switching signal QL1 Switching output

Switching signal QL2 Switching output

1) SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to "direct"/"deacti-vated").2) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used.3) IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters.

Classifications

ECl@ss 5.0 27270101

ECl@ss 5.1.4 27270101

ECl@ss 6.0 27270101

ECl@ss 6.2 27270101

ECl@ss 7.0 27270101

ECl@ss 8.0 27270101

ECl@ss 8.1 27270101

ECl@ss 9.0 27270101

ECl@ss 10.0 27270101

ECl@ss 11.0 27270101

ETIM 5.0 EC002714

ETIM 6.0 EC002714

ETIM 7.0 EC002714

UNSPSC 16.0901 39122230

Installation noteFlush installation

F

CB

D




ABCDEF

HIJKLMNOPQRST


Connection diagramCd-367

1+ (L+)

QL1/C

MF

– (M)

4

2

3

BN

BK

WH

BU

Characteristic curveResponse diagram

0

0

8(0.31)

4(0.16)

4(0.16)

1(0.04)

3(0.12)

2(0.08)

4(0.16)

8(0.31)

Sn in mm (inch)

Distance in mm (inch)

Dimensional drawing (Dimensions in mm (inch))

IMC12 Standard, connector, M12, flush

M1

2x1

65 (2.56)

8.9 (0.35)48 (1.89)




Recommended accessoriesOther models and accessories www.sick.com/IMC

Brief description Type Part no.

Universal bar clamp systems

Plate N05N for universal clamp bracket, M12, Stainless steel 1.4571 (sheet), Stainlesssteel 1.4408 (clamp), Universal clamp (5322626), mounting hardware

BEF-KHS-N05N 2051621

Plate N11N for universal clamp bracket, Stainless steel 1.4571 (sheet), Stainless steel1.4408 (clamp), Universal clamp (5322626), mounting hardware

BEF-KHS-N11N 2071081

Mounting brackets and plates

Mounting plate for M12 sensors, stainless steel, without mounting hardware BEF-WG-M12N 5320950

Mounting bracket for M12 housing, stainless steel, without mounting hardware BEF-WN-M12N 5320949

Modules and gateways

IO-Link V1.1 Class A port, USB2.0 port, optional external power supply 24V / 1A IOLA2US-01101(SiLink2 Master)

1061790

EtherCAT IO-Link Master, IO-Link V1.1, Port Class A, power supply via 7/8'' cable 24 V /8 A, fieldbus connection via M12 cable

IOLG2EC-03208R01(IO-Link Master)

6053254

EtherNet/IP IO-Link Master, IO-Link V1.1, Port Class A, power supply via 7/8'' cable24 V / 8 A, fieldbus connection via M12-cable

IOLG2EI-03208R01(IO-Link Master)

6053255

PROFINET IO-Link Master, IO-Link V1.1, Port Class A, power supply via 7/8'' cable 24 V /8 A, fieldbus connection via M12 cable

IOLG2PN-03208R01(IO-Link Master)

6053253

Plug connectors and cables

Head A: female connector, M12, 4-pin, straightHead B: Flying leadsCable: PP, unshielded, 2 mThis product is generally resistant to chemical cleaning agents (see ECOLAB) and otherchemical compounds such as H2O2 and CH2O2. Before permanent installation is car-ried out, the material's resistance to the cleaning agent being used must be checked.,Resistant against lactic acid & hydrogen peroxide (H2O2)

DOL-1204-G02MRN 6058291

Head A: female connector, M12, 4-pin, straightHead B: Flying leadsCable: PP, unshielded, 5 mThis product is generally resistant to chemical cleaning agents (see ECOLAB) and otherchemical compounds such as H2O2 and CH2O2. Before permanent installation is car-ried out, the material's resistance to the cleaning agent being used must be checked.,Resistant against lactic acid & hydrogen peroxide (H2O2)

DOL-1204-G05MRN 6058476

Head A: female connector, M12, 4-pin, angled with LEDHead B: Flying leadsCable: PP, unshielded, 2 mThis product is generally resistant to chemical cleaning agents (see ECOLAB) and otherchemical compounds such as H2O2 and CH2O2. Before permanent installation is car-ried out, the material's resistance to the cleaning agent being used must be checked.,Resistant against lactic acid & hydrogen peroxide (H2O2), only suitable for PNP sensors

DOL-1204-L02MRN 6058482































ABCDEF

HIJKLMNOPQRST


Brief description Type Part no.

Head A: female connector, M12, 4-pin, angled with LEDHead B: Flying leadsCable: PP, unshielded, 5 mThis product is generally resistant to chemical cleaning agents (see ECOLAB) and otherchemical compounds such as H2O2 and CH2O2. Before permanent installation is car-ried out, the material's resistance to the cleaning agent being used must be checked.,Resistant against lactic acid & hydrogen peroxide (H2O2), only suitable for PNP sensors

DOL-1204-L05MRN 6058483

Head A: female connector, M12, 4-pin, angledHead B: Flying leadsCable: PP, unshielded, 2 mThis product is generally resistant to chemical cleaning agents (see ECOLAB) and otherchemical compounds such as H2O2 and CH2O2. Before permanent installation is car-ried out, the material's resistance to the cleaning agent being used must be checked.,Resistant against lactic acid & hydrogen peroxide (H2O2)

DOL-1204-W02MRN 6058474

Head A: female connector, M12, 4-pin, angledHead B: Flying leadsCable: PP, unshielded, 5 mThis product is generally resistant to chemical cleaning agents (see ECOLAB) and otherchemical compounds such as H2O2 and CH2O2. Before permanent installation is car-ried out, the material's resistance to the cleaning agent being used must be checked.,Resistant against lactic acid & hydrogen peroxide (H2O2)

DOL-1204-W05MRN 6058477

Head A: female connector, M12, 4-pin, angledHead B: male connector, M12, 4-pin, straightCable: PP, unshielded, 2 mThis product is generally resistant to chemical cleaning agents (see ECOLAB) and otherchemical compounds such as H2O2 and CH2O2. Before permanent installation is car-ried out, the material's resistance to the cleaning agent being used must be checked.,Resistant against lactic acid & hydrogen peroxide (H2O2)

DSL-1204-B02MRN 6058502

Head A: female connector, M12, 4-pin, angledHead B: male connector, M12, 4-pin, straightCable: PP, unshielded, 5 mThis product is generally resistant to chemical cleaning agents (see ECOLAB) and otherchemical compounds such as H2O2 and CH2O2. Before permanent installation is car-ried out, the material's resistance to the cleaning agent being used must be checked.,Resistant against lactic acid & hydrogen peroxide (H2O2)

DSL-1204-B05MRN 6058503

Head A: female connector, M12, 4-pin, straightHead B: male connector, M12, 4-pin, straightCable: PP, unshielded, 2 mThis product is generally resistant to chemical cleaning agents (see ECOLAB) and otherchemical compounds such as H2O2 and CH2O2. Before permanent installation is car-ried out, the material's resistance to the cleaning agent being used must be checked.,Resistant against lactic acid & hydrogen peroxide (H2O2)

DSL-1204-G02MRN 6058499

Head A: female connector, M12, 4-pin, straightHead B: male connector, M12, 4-pin, straightCable: PP, unshielded, 5 mThis product is generally resistant to chemical cleaning agents (see ECOLAB) and otherchemical compounds such as H2O2 and CH2O2. Before permanent installation is car-ried out, the material's resistance to the cleaning agent being used must be checked.,Resistant against lactic acid & hydrogen peroxide (H2O2)

DSL-1204-G05MRN 6058500


















Recommended servicesAdditional services www.sick.com/IMC

Type Part no.

Function Block Factory

• Brief description: The Function Block Factory supports common programmable logic con-trollers (PLCs) from various manufacturers, such as Siemens, Beckhoff, Rockwell Automa-tion and B&R. More information on the FBF can be found <a href=https://fbf.cloud.sick.comtarget="_blank"> here</a>.

Function Block Factory On request





http://www.sick.com/p/p653518

http://www.sick.com/p/p653518

Onlin

e da

ta s

heet

SICK AG | Waldkirch | Germany | www.sick.com

SICK At A GlAnCeSICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica-tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment.

We have extensive experience in a wide range of industries and understand their processes and require-ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner.

Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma-chine life cycle and ensure safety and productivity.

For us, that is “Sensor Intelligence.”

WOrldWIde preSenCe:Contacts and other locations – www.sick.com

IMC IMC12-04BPPVC0SA00, Product data sheet...IMC12-04BPPVC0SA00 | IMC INDUCTIVE PROXIMITY SENSORS...

Documents

Transcript of IMC IMC12-04BPPVC0SA00, Product data sheet...IMC12-04BPPVC0SA00 | IMC INDUCTIVE PROXIMITY SENSORS...