Image and sound optimization
-
Upload
dmydlack -
Category
Technology
-
view
99 -
download
0
Transcript of Image and sound optimization
Download the Media Bits
On the Class Blackboard, find the link to the Image and Sound Optimization Materials
Assemble the Timeline
• Assemble the related clips on the timeline. I’m using Latimer first, Little second, Ahlfeldtthird, Tolland fourth, and the two sound files last.
• Let’s start with the first Latimer clip.
• Notice how the (blue) waveform depicts the brightness levels of the image.
• There are many ways to adjust brightness levels and color balance.
• I’m choosing to use Video Effects/Adjust/Auto Levels
• Drag that effect onto the first clip.
• Under Auto Levels, I adjusted the White Clip until I brought the skin tones in the bright part of the face to around 70 ire.
• Remember, levels are set to skin tones generally.
• I also go and add the Video Effects/Color Correction/Fast Color Corrector filter; the color looks a little too intense and hot.
• I’m interested only in nudging the color balance a teeny bit away from the yellow-green.
• More importantly, I turn down the Saturation a bit.
• Usually, many shots from the same camera session will require the same filter correction.
• Once you figure out one, you can copy and paste the filters with their settings and apply them to the similar clips.