ILLUMINA NMPK2-3LED 12V LED Puck Light Kit Source: 4.2W ...light/nora-nmpk2-specs.pdf · ILLUMINA e...

®

®

®

®

6505 Gayhart St., Commerce, CA 90040 | Phone: 800.686.6672 | FAX: 800.500.9955 www.noralighting.com | e-mail: [email protected] Specifications subject to change without notice. © 2016

®

®

®

®

ILLUMINATING THE FUTURE.. .SINCE 1989

Type

Project

Catalog No.

Lamp/Wattage

NMPK2-3LED 12V LED Puck Light Kit Source: 4.2W LEDs each Puck Light

Diameter: 2-3/4" Width: 1/2"

of 5

2-3/4"

1/2"

PRODUCT DESCRIPTION Nora Lighting introduces a new slim light disk LED system for accent, under cabinet, cove lighting and jewelry cases, and other appplications with limited space. These low-profile fixtures can be chained together to provide excellent and even illumination on all surfaces. Light disk is one of the most energy efficient products in the market. Combined with ultra low-profile housing, Nora’s light disk offers unique features and a great ease of installation. LED technology eliminates forward heat from the fixture, also no UV or infrared rays to harm artwork, retail displays or heat sensitive foods.

FEaTURES • Availableinsingleunitsorakit,whichincludes3pucklights • Tenlightscanbedaisy-chainedupto90'awayfromdriver • Wellsuitedforverysmallspaces:1/2"deepwith2-3/4"diameter • Easyinstallationusingonescrew • DimmablewithMagneticPowerSupply • Threesets3",6",12"and24"interconnectioncablesincludedwitheachpucklightkit • ExceedsTitle24highefficacyrequirements • Noflickerdelayorwarmuplikecompactfluorescentproducts • NoUVlightorinfraredwavelengths • ThreeYearLimitedWarranty

Included with every puck light kit:(3)12V3000KLEDPuckLight[NMPK1-3LED30],(3)3"InterconnectionCable[NAPK-703],(3)6"InterconnectionCable[NAPK-706],(3)12"InterconnectionCable[NAPK-712],(3)24"InterconnectionCable[NAPK-724],(3)MiniCoupler[NAPK-713],(3)MountingClip,(3)Screw,(1)12"PowerLineInterconnectorwithSwitch[NAPK-711],(1)12V24WDirectPlug-InLEDDriver[NAPK-524/12].

CONSTRUCTION Die-cast aluminum, round, available in 3 different colors with matching cord colors: white and brushed nickel (both with white cord), and bronze (with black cord).

ELECTRICaL Voltage: 12V DC Power Consumption: 4.2 Watts each Lumens:200Lumens@3000Keach/180Lumens@4200Keach Light Source: 3 LEDs each Efficacy: 50LPW@3000Keach Life Expectancy: 30,000Hourseach Maximum Length: Ten daisy-chained per run.

Labels and WarrantycULus Listed for Damp Location RoHSCompliantTitle 24 Compliant California Energy Commission ThreeYearWarranty

DImENSIONS

RoHSC O M P L I A N T2008

12V LED Puck Light KitNMPK2-3LED30BZ: 12V LED Puck Light Kit, 3000K, Bronze

NMPK2-3LED30C: 12V LED Puck Light Kit, 3000K, Chrome

NMPK2-3LED30W: 12V LED Puck Light Kit, 3000K, White

LED DRIVERSHARDWIRE DRIVERS

ACCESSORIES

DRIVER ACCESSORIES

PLUG-IN DRIVERS

Item Number DescriptionNMPKA-RECBZNMPKA-RECCNMPKA-RECWNAPK-701BNAPK-701WNAPK-702NAPK-703NAPK-706NAPK-712NAPK-724NAPK-736NAPK-748NAPK-709BNAPK-709WNAPK-711BNAPK-711WNAPK-713BNAPL-713W

Recess Mount for LED Puck, BronzeRecess Mount for LED Puck, BronzeRecess Mount for LED Puck, BronzeSplitter, BlackSplitter, White2" Interconnection Cable3" Interconnection Cable6" Interconnection Cable12" Interconnection Cable24" Interconnection Cable36" Interconnection Cable48" Interconnection Cable18" Power Line Interconnector, Black18" Power Line Interconnector, White12" Power Line Interconnector with Switch, Black12" Power Line Interconnector with Switch, WhiteMini Coupler, BlackMini Coupler, White

Item Number DescriptionNAPK-530HW/12NAPK-560HW/12NMTD-40/12DNMTD-60/12DNMT-244/12C2D1

12V 30W Class II Hardwired Electronic LED Driver12V 60W Class II Hardwired Electronic LED Driver12V 40W Dimmable Class II Hardwire Magnetic Driver 120/227V Input (Includes NAPK-10)12V 60W Dimmable Class II Hardwire Magnetic Driver 120/227V Input (Includes NAPK-10)12V Dimmable Class II Hardwire Magnetic Driver (Includes 4 NAPK-10 Connectors)

NAPK-524/12 12V 24W Direct Plug-In LED Driver

NAPK-10 NAPK-30 NATL-415 NRA-125/6 NRA-125/12 NRA-125/18 NRA-125/72 NRA-6035W/6 NRA-6035W/10 NUSP-JBox

Replacement 10' Power Line Connector for NMT Series Replacement 30' Power Line Connector for NMT Series Low Voltage Splice Box 6" Extension Cord for NAPK-530HW/12 & NAPK-560HW/12 12" Extension Cord for NAPK-530HW/12 & NAPK-560HW/12 18" Extension Cord for NAPK-530HW/12 & NAPK-560HW/12 72" Extension Cord for NAPK-530HW/12 & NAPK-560HW/12 6' Cord and Plug for NAPK-530HW/12 & NAPK-560HW/12 10' Cord and Plug for NAPK-530HW/12 & NAPK-560HW/12 Junction Box required for hardwiring NAPK-530HW/12 & NAPK-560HW/12

®

®

®

®


LED Puck Light Optional Accessories

of 5

SplitterAllowssplittingthepucklightfromarunor,intofour separate runs or pucks.

NAPK-701B: Splitter, Black

NAPK-701W: Splitter, White

Interconnection CableThe interconnection cables allow for linking of any puck lights in any direction or extension of power line interconnectors when used with coupler. Interconnection cables may be joined together for custom lengths when used with coupler.

NAPK-702B: 2" Interconnection Cable

NAPK-702W: 2" Interconnection Cable













Power Line InterconnectorToconnectaPuckLightrundirectlytoLEDDriver.

Power Line Interconnector with SwitchAllowsforindividualswitchingonanyPuckLightrun.ConnectsaPuckLightrundirectlytoLEDDriver.OneisincludedwitheveryPuckLightKit.

NAPK-713B: Mini Coupler, Black

NAPK-713W: Mini Coupler, White

Mini CouplerUsed to connect two interconnection cables together. Can also be used to extend power line interconnectors. Three are included with every PuckLightKit.

NAPK-709B: 18" Power Line Interconnector, Black

NAPK-709W: 18" Power Line Interconnector, White

NAPK-711B: 12" Power Line Inter. w/Switch, Black

NAPK-711W: 12" Power Line Inter. w/Switch, White

0.78"0.38"

1.57"0.99"

0.49"

0.49"

Recess MountForLEDPuck

NMPKA-RECBZ: Recess Mount for LED Puck, Bronze NMPKA-RECC: Recess Mount for LED Puck, ChromeNMPKA-RECW: Recess Mount for LED Puck, White

3.5"

0.55"

2.92"

®

®

®

®


12V LED Puck Light Drivers

of 5

30W 12V Class II Hardwire Electronic LED DriverAllowshardwiringTapeLightrunbyusing NUSP-JBox.Canalsobeconvertedintodirectplug-indriverbyusingNRA-6035.Requirespowerline interconnection cable. Non-Dimmable.

3.25"

1.25"

NAPK-530HW/12: 12V 30W Class II Hardwire Driver

4"

60W 12V Class II Hardwire Electronic LED DriverAllowshardwiringTapeLightrunbyusing NUSP-JBox.Canalsobeconvertedintodirectplug-indriverbyusingNRA-6035.Requirespowerline interconnection cable. Non-Dimmable.

NAPK-560HW/12: 12V 60W Class II Hardwire Driver

1.75"5.63"

3.25"

2.25"

4"

2.5"6"

240W 12V Class II Dimmable Hardwire LED DriverIncludesfour60Wbreakers,whichallowshardwiring four Tape Light runs and dimming with MagneticLowVoltageDimmer.Includes(4)10'powerlineconnector(NAPK-10).Requirespowerlineinterconnectioncable.Manualresetthermalcircuit - secondary side. Integral regulator for constantcurrentandvoltage.Canbemounted30'from start of fun.

NMT-244/12C2D1: 120/12V 240W C2 Dimm. Driver

12V Class II Dimmable Hardwire LED DriverAllowshardwiringPuckLightandTapeLightrunanddimmingwithMagneticLowVoltageDimmer.Includes10'powerlineconnector(NAPK-10).Requirespowerlineinterconnectioncable.Manualreset thermal circuit - secondary side. Integral regulator for constant current and voltage. Can be mounted30'fromstartoffun.

NMTD-40/12D 12V 40W Dimmable Class II Hardwire Magnetic Driver 120/227V Input (Includes NAPK-10)

NMTD-60/12D 12V 60W Dimmable Class II Hardwire Magnetic Driver 120/227V Input (Includes NAPK-10)

3.25"11.25"

3.37"

NAPK-524/12: 12V 24W Direct Plug-In LED Driver

12V Direct Plug-In LED DriversAllowsdirectconnectionawalloutletwith47"cord and plug. Requires power line interconnection cable. Non-Dimmable.

2.13"

1.38"

2.88"

4.43"

14.25"8.43"

®

®

®

®


12V LED Puck Light Drivers Accessories

of 5

NUSP-JBox: Junction Box for Hardwiring

Junction Box for HardwiringRequiredforhardwiringNAPK-530HW/12or NAPK-560HW/12.Canbeusedtofeedtoseparateruns.AcceptsRomex®.

4.25"

1.54"

2.75"

Replacement Power Line ConnectorForusewithNMTSeries.Replacesincluded10'leadwire,toallowfor30'orlesslengthbetweenPuckLight/TapeLightrunandLEDDriver.

NAPK-10: 10' 12V Power Line Connector

NAPK-30: 30' 12V Power Line Connector

Cord and Plug for NAPK-530HW/12 or NAPK-560HW/12UsedtoconvertNAPK-530HW/12orNAPK-560HW/12intoadirectplug-indriver.

NRA-6035W/6: 6' Cord and Plug

NRA-6035W/10: 10' Cord and Plug

Low Voltage Splice BoxUsetojoinRomex®lowvoltageleadtopowerlineconnector.

NATL-415: Low Voltage Splice Box

0.8" 2.3"

Extension Cord for NAPK-530HW/12 or NAPK-560HW/12UsedtoextendlengthbetweenNUSP-JBoxandNAPK-530HW/12orNAPK-560HW/12.Canbejoined together to create custom lengths.

NRA-125/6: 6" Flexible Extension Cord




®

®

®

®


of 5

Suggested Layouts

A. NMPK1-3LED 12V LED Puck Light

B. NAPK-702 NAPK-703 NAPK-706 NAPK-712 NAPK-724 NAPK-736 NAPK-748

2" Interconnection Cable 3" Interconnection Cable (included w/ puck light) 6" Interconnection Cable (included w/ each puck light) 12" Interconnection Cable (included w/ each puck light) 24" Interconnection Cable (included w/ each puck light) 36" Interconnection Cable 48" Interconnection Cable

C. NAPK-713 Mini Coupler (included w/ each puck light)

D. NAPK-711 12" Power Line Interconnector with Switch

E. NAPK-524/12 12V 24W Direct Plug-In LED Driver

A. NMPK1-3LED 12V LED Puck Light

B. NAPK-702 NAPK-703 NAPK-706 NAPK-712 NAPK-724 NAPK-736 NAPK-748

2" Interconnection Cable 3" Interconnection Cable (included w/ each puck light) 6" Interconnection Cable (included w/ each puck light) 12" Interconnection Cable (included w/ each puck light) 24" Interconnection Cable (included w/ each puck light) 36" Interconnection Cable 48" Interconnection Cable

C. NAPK-701 Splitter

D. NAPK-709 18" Power Line Interconnector

E. NAPK-10 10' Power Line Connector (included w/NMT-60/12C2D1)

F. NMT-60/12C2D1 120V/12V 60W Class II Dimmable LED Driver

ILLUMINA NMPK2-3LED 12V LED Puck Light Kit Source: 4.2W ...light/nora-nmpk2-specs.pdf · ILLUMINA e...

Documents

Transcript of ILLUMINA NMPK2-3LED 12V LED Puck Light Kit Source: 4.2W ...light/nora-nmpk2-specs.pdf · ILLUMINA e...