ILC Beam Dynamic
description
Transcript of ILC Beam Dynamic
1
Freddy Poirier, 12/06/06, DESY student seminar.
ILC Beam Dynamic Freddy PoirierFLC / EUROTEV group
It is a project designed to smash together electrons and positrons at the center of mass energy of 0.5 TeV initially and 1 TeV later.
The ILC Global Design Effort team, established in 2005, has been making its accelerator design. Recently, it worked out the baseline configuration for the 30-km-long 500 GeV collider.
ILC= International Linear Collider
2
Freddy Poirier, 12/06/06, DESY student seminar.
Why a straight machine?• Synchrotron RadiationBending a particle = loosing some energy
E ~ (E4 /m4 R)
• From a cost point of view:
Rm,E
cost
Energy
CircularCollider
Linear Collider
At high energy,linear collider ismore cost effective
3
Freddy Poirier, 12/06/06, DESY student seminar.
Physics at the ILC (1)• Explore new Physics through high precision at
high energy• Study the properties of new particles (Cross-sections, BR’s,
Quantum numbers) ILC=microscope• Study known SM processes to look for tiny deviations
through virtual effects (needs precision of measurements and theoretical predictions)
– Precision measurements will allow:• Distinction of different physics scenarios• Extrapolation to higher energies
ILC=telescope
ILC will provide a detailed map of new physics
Exemple with e+/e- LEP experiment: Indirect determination ofthe top quark mass.Proves high energy reachthrough virtual processes
4
Freddy Poirier, 12/06/06, DESY student seminar.
Physics at ILC (2)• Comprehensive and
high precision coverage of energy range from Mz to ~ 1TeV
Physics Topics:Higgs MechanismSupersymmetryStrong Electroweak
Symmetry BreakingPrecision Measurements
at lower energies
cross sections few fb to few pb e.g. O(10,000) HZ/yr
5
Freddy Poirier, 12/06/06, DESY student seminar.
Luminosity• Parameters for the ILC from physics point of view:
– Ecms adjustable (90500GeV)– Luminosity int Ldt=500 fb-1 in 4 years– Ability to scan – Energy stability and precision below 0.1%– Polarisation of electrons (at least 80%)
To achieve high luminosity small sizes at the interaction point have to be achieved
What is needed to reach high luminosity?
Before going to the world of beam dynamic, let’s have a look at the ILC
Dyx
repb HfNn
L4
:Luminosity2
factort enhancemen beam-Beam
beam)(gaussian size Transverse
rate Repetition bunchper Particles
nbunch/trai ofNumber where
,
D
yx
rep
b
H
fNn
6
Freddy Poirier, 12/06/06, DESY student seminar.
Layout of the ILC
500 GeV
Upgraded energy (~1TeV)
Long straight sections (e-/e+)
Nominal:nm 5 ,500, yx
10 km~31 km
7
Freddy Poirier, 12/06/06, DESY student seminar.
Scheme of the ILC
Squeeze the beam as small as possible for High luminosity
5 nano m
Electron source
To produce electrons, light from a titanium-sapphire laser hit a target and knock out electrons. The laser emits 2-ns "flashes," each creating billions of electrons. An electric field "sucks" each bunch of particles into a 250-meter-long linear accelerator that speeds up the particles to 5 GeV.
Damping Ring for electron beam
In the 6-kilometer-long damping ring, the electron bunches traverse a wiggler leading to a more uniform, compact spatial distribution of particles.
Each bunch spends roughly 0.2 sec in the ring, making about 10,000 turns before being kicked out. Exiting the damping ring, the bunches are about 6 mm long and thinner than a human hair.
Main Linac
2 main linear accelerators, one for electrons and one for positrons, accelerate bunches of particles up to 250 GeV with 8000 superconducting cavities nestled within cryomodules. The modules use liquid helium to cool the cavities to - 2°K. Two ~10-km-long tunnel segments, house the two accelerators. An adjacent tunnel provides space for support instrumentation, allowing for the maintenance of equipment while the accelerator is running.
8
Freddy Poirier, 12/06/06, DESY student seminar.
Beam Dynamic
• Beam dynamic is the study of the evolution of the beam through the various sections:– Here we’ll look at the beam dynamic in the linear
accelerator section.• i.e. after the Bunch compressor and before the Beam
Delivery System (BDS)
– The accelerator section is part of the LET (Low Emittance Transport):
• The goal of game here is to accelerate the beam from 15 GeV up to 250 GeV (for center of mass energy of 500 GeV)
• Keep the emittance growth as low as possible
9
Freddy Poirier, 12/06/06, DESY student seminar.
Lattice• The lattice is a series of components (periodic arrangement) in the
beam line– It is constituted mainly of
• Magnets (quadrupoles, dipoles,…)• Accelerating cavities - SuperConducting Radio Frequency (SCRF)• Diagnostic Systems
– The most basic repetitive sequence of components is called a FODO cell (focusing and defocusing quadrupole interspaced with drift space)
1 FODO cell
Trajectory of an individual electron in the FODO lattice.•The magnetic lattice is periodic (2d)
•The pseudo-sinusoidal motion is referred to as the Betatron oscillation.
•The phase advance per FODO cell period is here µ=π.
x
QF QD
10
Freddy Poirier, 12/06/06, DESY student seminar.
Betatron Oscillation• Property of the focusing arrangement
phase advance variation
• The betatron oscillation are e.g. dependent on the strength of the quadrupole, (independently) for x and y:
y
x
Nominal focus. Quad. strength |k0|= 0.0524 m-2
Changed to |k1|= 0.0624 m-2
k0
k1
QD QF
)(/1)(' ss
11
Freddy Poirier, 12/06/06, DESY student seminar.
Motion• From the equation of motion (Hill’s equa.):
Where K(S) is the quadrupole strength and is periodic i.e. K(S)=K(S+2d) One can get the solution in the form (Floquet’s theorem):
0)('' xsKx
))(cos()( 0 ssx xx
Emittance: (initial condition)
Beta amplitude: periodic(dependant on focusing strength)
Initial phase
Phase advance (dependant on focusing strength)
And get the differentiate along the beam axis:
))(sin()( 0
ssds
dxxx
x
12
Freddy Poirier, 12/06/06, DESY student seminar.
Emittance• To talk to an accelerator physicist, talk in
phase-space diagram (x’ vs x):– 1 particle travelling along the linac will
describe in x’,x plane an ellipse (approx.)
– Now we are not dealing with 1 particle but with a bunch of them.
– At 1 location, x’,x plane:– All particles travelling will form an elliptical
surface on the plane.– The ellipse envelope is a characteristic of
the quality of the beam (it encompasses 95% particles). It is called the emittance .
13
Freddy Poirier, 12/06/06, DESY student seminar.
Beam Size• The Beam size is computed with
Luminosity is then defined (gaussian beam) by:
yxyxyx ,,,
D
yyxx
repb HfNn
L****
2
4
Defined by focussing arrangement at IP
Quality of the beam at IP and dependent of emittance prior to IP
The challenge with the (normalised) emittance is that along a transport line it can only get worse.
Dispersion not included
14
Freddy Poirier, 12/06/06, DESY student seminar.
Degradation of emittance
• In a linac the emittance will inevitably degrade due to:– Synchrotron Radiation– Collective effects
• Wakefields– Residual gas scattering– Accelerator errors:
• Beam mismatch (field errors)• Dispersion, x-y coupling
– Magnet alignment errors
15
Freddy Poirier, 12/06/06, DESY student seminar.
Wakefields• Passage of charged particle beams induce
electromagnetic field in RF cavities and other structures in accelerator.
• These wakefields act back on the beams and may cause instabilities– Long range Wakes: acts on following beam– Short range W: head of bunch acts on its tail
16
Freddy Poirier, 12/06/06, DESY student seminar.
Wakefields
• Bunch ‘current’ generates wake that decelerates trailing bunches.
• Bunch current generates transverse deflecting modes when bunches are not on cavity axis
• Fields build up resonantly: latter bunches are kicked transversely
tb
bunch
0 km 5 km 10 km
head
head
headtailtail
tail
accelerator axis
cavities
y
tail performsoscillation
Long range:
Short range:When bunch is offset wrt cavity axis, transverse (dipole) wake is excited.
Wt α a-3.5
17
Freddy Poirier, 12/06/06, DESY student seminar.
Effect of misalignment
Multibunch emittance growth for cavities with 500m RMS misalignment
The misalignements contribute largerly into the emittance growth along the linac.
18
Freddy Poirier, 12/06/06, DESY student seminar.
A challengeRMS random misalignments to produce 5%
vertical emittance growthBPM offsets 11 mRF cavity offsets 300 mRF cavity tilts 240 rad
• Impossible to achieve with conventional mechanical alignment and survey techniques
• Typical ‘installation’ tolerance: 300 m RMS– On BPM this would imply an emittance growth of
3800%• At Beginning of linac y=20 nm.rad• At IP y=~40 nm.rad
Beam Based Alignment is crucial
19
Freddy Poirier, 12/06/06, DESY student seminar.
Beam Based Alignment• Alignment performed on the beam using
the beam itself.• It involves steerers and BPM (measure beam centroid position)
• BACK to BASIC:
YjYi
Ki
gij 1. A particle arriving non centered on a quad will get a kick.
2. Betatron oscillation surimposed
3. Emittance grows
1
j
j ij i i ji
y g K Y Y
yj
Standard notation used: i.e. focusing for x, but defocusing of y
20
Freddy Poirier, 12/06/06, DESY student seminar.
A BBA solution? 1-to-1 steering
• To limitate the kick one could think of a solution:
simply apply one to one steering to orbit: i.e. at each BPM zeroing the orbit with a steerer such that the bunch centroid is in the central axis of the quad.
steererquad mover
dipole corrector
Assuming:
-A BPM adjacent to each quad,
-A ‘steerer at each quad
BPM
1-2-1 corrected orbit But BPM are offset wrt quad.
Dispersion are increased(Particle with different energy will undergo a different angle in electromagnetic field)
Emittance grows
21
Freddy Poirier, 12/06/06, DESY student seminar.
BBA - DFS
• Dispersion Free Steering (DFS)– Measure beam orbit (BPM) for a beam at E0– Measure beam orbit for beam(s) at other
energies– Find a set of steerer settings which minimise
the orbit difference. (for the case of curved linac: minimize wrt to the designed orbit difference)
22
Freddy Poirier, 12/06/06, DESY student seminar.
BBA (2)• An exemple of results for the BBA:
Good result for DFS technique.
- Benchmarking of the various DFS algorithm are being done
- Dynamic effect of ground motion not included
DFS lower emittance growth
Nor
mal
ized
em
ittan
ce (m
.rad)
DFS along linacWith 2 beams
No position jitter
Energy (GeV)
Transverse Quadrupole 300 µm Wrt to CM axis
Rotation Quadrupole 300 µrad
Transverse BPM Alignment error 200 µm CM
Transverse RF Structure 300 µm CM
Rotation RF Structure 300 µrad CM
Cryomodule Offset 200 µm Accel. Ref
BPM Resolution 5 µm (10 µm in TDR)
With jitter
23
Freddy Poirier, 12/06/06, DESY student seminar.
BBA(3)
• BBA when?– In general following a startup, or at regular
intervals (DFS for SLC: monthly basis)
– this process takes time; during which the machine is not integrating luminosity (TT)
– typically takes ~ 100 pulses per focusing magnet; with ~5 different energies.
– 300 magnets: ~ 2 hours per linac
24
Freddy Poirier, 12/06/06, DESY student seminar.
Measuring the Emittance
• Conventional (wire scanners) diagnostic: damaged
• Need for a non-invasive system
How to measure the emittance:
At Several (≥3) locations measure beam size emittance
It is foreseen to use laser-wires (finally focused laser) diagnotics system to perform emittance measurements.
25
Freddy Poirier, 12/06/06, DESY student seminar.
Laser-Wire Principle•Collision between electron and laser beam
•Detection of scattered photons
•Waist of laser < e- beam size
•Number of scattered photons depend on:
*Compton cross section
*Number of electrons / bunch
*Laser power and wavelength
*1/ interaction area
*relative position of laser and el. beam
26
Freddy Poirier, 12/06/06, DESY student seminar.
Laser-Wire at PETRA• Positron Electron Tandem Ring
Accelerator• Long free straight section• Easy installation of hardware due to
existing access pipe and hut outside tunnel area
• 1 IP
4.5 to 124.5 to 12~100~1003 to 203 to 201000 to 1001000 to 100100 to 10100 to 10
E/GeVE/GeVzz/ps/ps
nCnCxx//mm
yy//mm
EnergyEnergyBunch LengthBunch LengthCharge/bunchCharge/bunchHor. beam sizeHor. beam sizeVer. beam sizeVer. beam size
27
Freddy Poirier, 12/06/06, DESY student seminar.
Laser-Wire (2)
A new high power laser is being installed at PETRA will be used in 2006
2nd vertical plane at IP is in place for horizontal measurements
First vertical beam size measurements: 2003
2005: New vacuum chamber faster scan
m = (68 ± 3 ± 14) m
28
Freddy Poirier, 12/06/06, DESY student seminar.
2005 2006 2007 2008 2009 2010
Global Design Effort Project
Baseline configuration
Reference Design
ILC R&D Program
Technical Design
Expression of Interest to Host
International Linear Collider Timeline
29
Freddy Poirier, 12/06/06, DESY student seminar.
ILC Design
• Linear collider design is complex due to the interrelationships among the various parameters and the soft constraints on their values.
Bob Palmer1990
Here was presented a snapshot of studies related to the ILC Beam Dynamic.
More is done at DESY on:
Damping Ring, Bunch Compressor, Failure mode, Vibrations,…
Check Beam Dynamic activities website at DESY.
30
Freddy Poirier, 12/06/06, DESY student seminar.
References
Picked up of lot of the plots, drawings, … from: • recent ILC school:
– http://www.linearcollider.org/school/
• Accelerator school:– USPAS 2003
• and other reference papers or conference:– Baseline Configuration Design (BCD) website:
http://www.linearcollider.org/wiki/doku.php?id=bcd:bcd_home
– Talks at Snowmass 2005
31
Freddy Poirier, 12/06/06, DESY student seminar.
More slides / bk-up
32
Freddy Poirier, 12/06/06, DESY student seminar.
Both frequency spectrum and spatial correlation important for LC performance
Ground motion spectra
33
Freddy Poirier, 12/06/06, DESY student seminar.
Bunch Compression• bunch length from ring ~ few mm• required at IP 100-300 mm
RF
z
E /E
z
E /E
z
E /E
z
E /E
z
E /E
dispersive section
34
Freddy Poirier, 12/06/06, DESY student seminar.
Wake Amplitude
NLC RDDS1 bunch spacing
35
Freddy Poirier, 12/06/06, DESY student seminar.
Test of Unification
Extrapolation of SUSY parameters from weak to GUT scale (e.g. within mSUGRA)
Gauge couplings unify at high energies,
Gaugino masses unify at same scale
Precision provided by ILC for sleptons, charginos and neutralinos will allow to test if masses unify at same scale as forces
Gluino (LHC)
SUSY partners of electroweak bosons and Higgs
MSSM: 105 parameters: some from LHC, some from ILC
36
Freddy Poirier, 12/06/06, DESY student seminar.
Extra dimensions
measurement of cross sections at different energies allows to determine number and scale of extra dimensions
(500 fb-1 at 500 GeV,
1000 fb-1 at 800 GeV)
cross section for anomalous single photon production
Energy
= # of extra dimensionse+e- -> G
Emission of gravitons
into extra dimensions
Experimental signature:
single photons
37
Freddy Poirier, 12/06/06, DESY student seminar.
Precision Electroweak Tests
together with
ΔMW = 7 MeV(threshold scan)
and
ΔMtop = 100 MeV
high luminosity running at the Z-poleGiga Z (109 Z/year) ≈ 1000 x “LEP” in 3 months with e- and e+ polarisation
ΔsinΘW = 0.000013
38
Freddy Poirier, 12/06/06, DESY student seminar.