IGLU Graphics and Illustrations Capability Statement (Email)
IGLU Product Guide
-
Upload
trinhnguyet -
Category
Documents
-
view
266 -
download
3
Transcript of IGLU Product Guide
E SPG207 Jun 20151 2
A compact, in-ground, mains on-board dimmable DMX driven, linear LED wallwash luminaire, providing even wash of light up to 5m. Delivering 1350lm per metre - IP67
IGLu acdc1120
3 4
IGLu acdclighting.com/LED/IGLu
Product overview 05
Application images 07
Detailed product performance 09
Product drawings and images 10
Speci�cation codes 11
Installation instructions 13
Speci�cation sheet 17
Contact details 18
CONTENTS
IP67
5 6
IGLu acdclighting.com/LED/IGLu
A compact, in-ground, mains on-board dimmable DMX driven, linear LED wallwash luminaire, providing even wash of light up to 5m. Delivering 1350lm per metre - IP67Provides an even, continuous and powerful light output with excellent colour rendering
Available in 3 lengths, 400mm, 800mm,1200mm.
Choice of three tilt options – 0°, 5° and 10°
Fittings can be installed end to end for a continuous wallwash effect
A micro louvre minimises glare and shields LEDs from view
Architectural grade aluminium extrusion
High ef�ciency LEDs tested to LM80 standards, 50,000hrs lifetime with lumen maintenance at L70
All LEDs are within a 2 step MacAdam ellipse to ensure colour consistency
A range of optics is available to suit every application: 18°, 24°, 30°, 50° x 20°
Choice of �nishes: Extremely durable anodised aluminium black, anodised aluminium titanium. For especially demanding environments use hard anodised black, hard anodised titanium, chlorine anodised black, chlorine anodised titanium.
Suitable for use in ambient temperatures ranging from -20ºC to 50ºC
Maximum static load of 1000kg
Impact resistant to IK 07
OVERVIEW
7 8
IGLu acdclighting.com/LED/IGLu
The Regent Bridge, Edinburgh, Scotland. Lighting Design: FOTO-MA.Distribution partner: Kelvin Lighting. © Stuart Armitt.acdc LED product: IGLu (acdc1120)
APPLICATION IMAGES
All acdc products are independently tested in line with LM80 standards, 50,000 hours lifetime
with lumen maintenance at L70 to guarantee product performance.
Output data �gures stated are typical values.
To download photometric �les please visit www.acdclighting.co.uk/led/IGLu
UX TSI
LED Type CreeLED Quantity 12Drive Current 350mAPower Consumption. Including 85% Ef�cient Driver 14.66WPFC Driver dependant (Typical 0.9)Colour Temp 2700ºK 3000ºK 4200ºK 6000ºKInitial Colour Accuracy 2 Step MacAdam EllipseColour Stability Over Life. Measured at 6000hrs 2 Step MacAdam EllipseCRI 85 85 80 80Initial Lamp Lumen Output 1213 1420 1328 1328Initial Lamp Lumens per Circuit Watt 82.78 96.88 90.62 90.62Lamp Lumen Output including Thermal & Optical Losses 1031 1208 1129 1129Lamp Lumens (Including Thermal & Optical Losses) per Circuit Watt 70.35 82.37 76.98 76.98Luminaire Lumen Output 478 531 478 478Luminaire Lumens per Circuit Watt (lm/W) 32.61 36.22 32.61 32.61Lifetime L70. Based on TM-21 >50,000 hoursLumen Depreciation LIF Cat/Codes for % depreciation at 10 000hrs Cat1/Code9
*Based on 400mm, 3000ºK, 50x20R optics, 0º tilt
*Based on 400mm 50x20R optics 0º tilt
Proj ct
0 . 6 01
i Ki o
e gp a
Luminaire / L C P lar)
Luminai e ACDC Light ng cdc 20 AAB 30/50x20R/NO D M
9 10
IGLu acdclighting.com/LED/IGLu
PRODUCT PERFORMANCEIGLu
IGLu End
Iglu Lengths
IGLu Sleeve
65mm
91mm
59mm
91mm
52mm
Flush endcap408mm, 808mm or 1208mm
Flanged endcap456mm, 856mm or 1256mm
IGLu, anodised aluminium black, 4200ºK, 50º, dimmable, 1200, 10º, IP67
acdc1120 /AAB /42/50R/DIM/1200/10ADJ/IP67
FinishesAnodised Aluminium Titanium AATAnodised Aluminium Black AABHard Anodised Titanium* HATHard Anodised Black* HABChlorine Anodised Titanium* CATChlorine Anodised Black* CAB
LED Colour2700ºK 273000ºK 304200ºK 426000ºK 60Red RGreen GBlue BAmber ARGB RGB
Optics18º 18R24º 24R30º 30R50º x 20º 50x20R
DimmingDimmable DIMNon-dimmable NON-DIM
Fitting Length400mm** 400800mm 8001200mm 1200
Angle of AdjustmentNone 0ADJ5º 5ADJ10º 10ADJ
IP RatingIP67 IP67
*Upon request. Miniumum order quantity applies **Not available with dimmable/RGB drivers on board (Remote only)
acdc1754 /CSK/AABEnd Cap OptionFlange Mounted End Cap with countersunk hole CSK
Flange Mounted End Cap with no holes NH
FinishedAnodised Aluminium Titanium AATAnodised Aluminium Black AABHard Anodised Titanium HATHard Anodised Black HABChlorine Anodised Titanium CATChlorine Anodised Black CAB
acdc1753 /1200/STELength400mm Extrusion 400800mm Extrusion 8001200mm Extrusion 12002.5m Cut On Site 2500
ILGu end cap used withStandard End Cap STEFlanged End Cap FME
Order Code
Flange mounted end cap Mounting sleeve kit
To order start leads, extension leads and interconnecting, please discuss your requirements with our sales team. Please refer to our white paper for usage in wet or submersed applications. This can be found by visiting www.acdclighting.com/wetapplications
2700°K 3000°K
RED
4200°K
GREEN
6000°K
BLUE AMBER RGB
Anodised Aluminium Titanium
HardAnodised Titanium
ChlorineAnodised Titanium
Anodised Aluminium
Black
HardAnodised
Black
ChlorineAnodised
Black
30º 50º x 20º24º18º
Optics
IGLu acdclighting.com/LED/IGLu
11 12
SPECIFICATION CODES
Length
Angles of Adjustment
IP rating
Finishes
LED colour
400mm 800mm
0º
1200mm
5º 10º
IP67
IGLu acdclighting.com/LED/IGLu
13 14
IGLu sleeveless
IGLu400mm 800mm 1200mm
A B C
SleeveFlanged End Cap 418mm 818mm 1218mm 62mm 91mm
Standard 413mm 813mm 1213mm 62 mm 91mm
SleevelessFlanged End Cap 414mm 814mm 1214mm 48mm 88mm
Standard 408mm 808mm 1208mm 48mm 88mm
A
B
C
5
4
32
1
240v
240v
Non-Dim
DMX
acdc1771
acdc1768acdc1768/10macdc1768/20macdc1768/50m
acdc1760acdc1760/10macdc1760/20macdc1760/50m
A x B x CLive Earth Neutral DMX + DMX-Live Earth Neutral DMX + DMX-Live Earth Neutral DMX + DMX-Live Earth Neutral DMX + DMX-Live Earth Neutral DMX + DMX- DMX
ShieldSwitched Brown Green Blue
DMX Brown Green Blue White Black Silver
Max 10 x 1.2m
Max 10 x 1.2m
240v
Starter Leadacdc1768/2m (2000mm)acdc1768/5m (5000mm)
IGLu IGLuFitting supplied as standard with input and output leads and connectors50mm longer than �tting to enable seemless connection
Max 10 x 1200mm IGLu
Non - Dimmable
End CapLink Lead acdc1769/2m (2000mm)
240v
DMX
Starter Leadacdc1760acdc1760/10m acdc1760/10macdc1760/50m
IGLu IGLu800mm or 1200mm onlyFitting supplied as standard with driver located underneath �tting. link lead required to butt �tttings up together.
Max 10 x 1200mm IGLu
800/1200mm 800mm 1200mmacdc1762
800mm
End Capacdc1771
Link Lead acdc1761 - 650mm link to link 800mm to next �tting.acdc1762 - 1050mm link to link 1200mm to next �tting.acdc1763 - 2650mm link to link 800mm �tting with 2m gap to next �tting.acdc1764 - 3050mm link to link 1200mm �tting with 2m gap to next �tting.
DRIVER DRIVER DRIVER DRIVER
acdc1761acdc1763/64
Dimmable
Wire Brown Blue Green/YellowConnection 240v + 240V - Earth240v + 240V - Earth240v + 240V - Earth
Wire Brown Blue Green/Yellow Shield White BlackConnection 240v + 240v -Connection 240v + 240v -Connection 240v + 240v - Earth DMX Drain DMX + DMX -Earth DMX Drain DMX + DMX -Earth DMX Drain DMX + DMX -Earth DMX Drain DMX + DMX -
INSTALLATION INSTRUCTIONS
• Only to be installed by a quali�ed electrician• Installation must be carried out in accordance with local regulations• Turn off mains power to the driver during installation and any subsequent dis-connecting or re-connecting at
the �tting• Use correct polarity when wiring. If in any doubt contact the installation helpline +44 (0) 845 862 6400• Do not cover the luminaires or drivers with thermal insulation or vapour barrier (see air space guidance)• acdc luminaires are designed for lighting applications and must not be used for any other purpose
IGLu acdclighting.com/LED/IGLu
15 16
IGLu with Sleeve
6
5
4
32
1
acdc1771
acdc1768acdc1768/10macdc1768/20macdc1768/50m
acdc1760acdc1760/10macdc1760/20macdc1760/50m
DMX
240v
240v
6 x 1200mm
Live Earth Neutral DMX + DMX-Live Earth Neutral DMX + DMX-Live Earth Neutral DMX + DMX-Live Earth Neutral DMX + DMX-Live Earth Neutral DMX + DMX- DMX Sheild
Switched Brown Green BlueDMX Brown Green Blue White Black Silver
9
87
INSTALLATION INSTRUCTIONS
This acdc product is• Dual binned within a 2 step MacAdam ellipse to guarantee colour consistency• Supplied with a 5 year guarantee
Speci�cation Codes - IGLu
Speci�cation Codes - Flange mounted end cap Speci�cation Codes - Mounting sleeve kit
IGLu IGLu End IGLu Sleeve IGLu Lengths
A compact, in-ground, mains on-board dimmable DMX driven, linear LED wallwash luminaire, providing even wash of light up to 5m. Delivering 1350lm per metre - IP67
Productacdc1120
Productacdc1754
Productacdc1753
Length
400mm 400800mm 8001200mm 1200
DimmingDimmable DIM
Non-Dimmable NON-DIM
IP RatingIP67 IP67
Angle of adjust-ment
None 0ADJ5º 5ADJ10º 10ADJ
acdc1120
acdc1754 acdc1753
FinishesAnodised aluminium
titanium AAT
Anodised aluminium black AABHard anodised titanium HAT
Hard anodised black HABChlorine anodised titanium CAT
Choline anodised black CAB
FinishesAnodised Aluminium
Titanium AAT
Anodised AluminiumBlack AABHard Anodised Titanium HAT
Hard Anodised Black HABChlorine Anodised Titanium CAT
Choline Anodised Black CAB
IGLu end cap used withStandard End Cap STEFlanged End Cap FME
End cap optionFlange Mounted End Cap
with countersunk holes CSKFlange Mounted End Cap
with no holes NH
Length400mm extrusion 400800mm extrusion 800
1200mm extrusion 12002.5m cut on site 2500
LED Colour2700ºK 273000ºK 304200ºK 426000ºK 60
R RG GB BA A
RGB RGB
Optics
18º 18R24º 24R30º 30R
50ºx20º 50x20R
Speci�cation sheet
Material: Robust luminaire made from custom-made aluminium extrusionFinish: Extremely durable anodised aluminium black, anodised aluminium titanium. For especially demanding environments use hard anodised black*, hard anodised titanium*, chlorine anodised black*, chlorine anodised titanium*.Format: Three tilt options – 0°, 5° and 10° available.Lengths: Available in 3 lengths. Flush end cap: 408mm, 808mm,1208mm. Flanged end cap: 458mm, 858mm,1258mm. Beam angles: 18°, 24°, 30°, 50° x 20°Glare control: Micro louvre to minimise glare and shield LEDs from view.Accessories: Flange mounted end cap with holes, �ange mounted end cap (no holes), mounting sleeve kit, start leads, extension leads, interconnecting leads.Run: Fittings can be installed end to end for a continuous wallwash effect. Temperature range: From -20ºC to 50ºCThermal management: Manufactured from bespoke grade aluminium extrusion for optimal heat management.*Upon request. Minimum order qauntity applies
Lumen Maintenance: High ef�ciency LEDs tested to LM80 standards, 50,000hrs lifetime with lumen maintenance at L70.Initial lamp Lumen output*: 1420lmLamp lumens inc thermal and optical losses*: 1208lmLuminaire Lumens output*: 531lmPower consumption (inc 85% ef�cient driver): 14.66WEf�cacy (Lm/W)*: 36.22LED Pitch: 33mm, RGB 33mmCRI: >80Binning: Colour consistency ensured across a project - 2 step MacAdam ellipse.LED Colour: 2700°K, 3000°K, 4200°K, 6000°K, R, G, B, A, RGBDriver: Switched, DMXListings: CE, ETL us/cIP rating: IP67Impact Resistence: IK07Max Load: 1000kgWarranty: 5 yearsWeight: 4.5kg per metre *Based on 400mm, 50x20R optics, 0º tilt
Luminaire Performance
IP67
Speci�cation subject to change without notice. Refer to our website for the most recent product documentation.
acdclighting.com | [email protected] | UK: +44 (0) 845 862 6400 | USA: +1 (410) 220 0088 | Dubai: +971 (0)4 3617365
acdclighting.com/LED/IGLu
E SPG207 Jun 2015
IGLuacdc1120
65mm
91mm
59mm
91mm
52mm
Flush endcap408mm, 808mm or 1208mm
Flanged endcap456mm, 856mm or 1256mm
IGLu acdclighting.com/LED/IGLu
18 19
Tel: +44 (0) 845 862 6400Fax: +44 (0) 845 862 6401Email: [email protected]
Tel: +44 (0) 845 862 6400
Sales Tel: +44 (0) 845 862 6400Deliveries Tel: +44 (0) 845 862 6458Email: [email protected]
Tel: +971 (0) 4 3617365 Email: [email protected]
Tel: +1 (410) 220 0088Email: [email protected]
Wordsworth HouseVantage Court, Riverside WayBarrowfordLancashire UKBB9 6BP
Innovation WorksGisburn RoadBarrowfordLancashireUKBB9 8NB
Ground FloorCentral BlockGreen MewsBevenden StreetLondonN1 6AS
Of�ce 405, Goldcrest Executive TowerCluster C - Jumeirah Lakes Towers (JLT)P.O. Box 643811DubaiUnited Arab Emirates
acdc corp, 841 E Fort Ave, #276Baltimore, MD 21230USA
We have an established and growing global network of over 60 distributors and consider them a vital extension to our British, Dubai and North American based export teams.
This ensures that all customers receive the same outstanding level of world-class service and knowledge regardless of the location of your project.
For contact details of our distribution partners, please visit acdclighting.com/contact/distribution-network/ or contact [email protected]
Speci�cation subject to change without notice. Refer to our website for the most recent product documentation.
Head Of�ce
Manufacturing
London Studio
Dubai Of�ce
USA Of�ce
Global Distribution Network
CONTACT