IGEP COM ELECTRON
Transcript of IGEP COM ELECTRON
The IGEP™ COM ELECTRON is an industrial processor board. It can be used as a computer-on-module for your product but also as a stand alone computer without the need of a baseboard.You don't need anything else than a USB cable to power the IGEP™ COM ELECTRON and communicate with it by using Ethernet over USB gadget implemented on Linux kernel. The IGEP™ COM ELECTRON provides a lot of features in a small size. You can build your project anywhere you want.
Fully tested, highly reliable, scalable, efficient and high performing board that allows customers to focus on their end application.
Designed for industrial and commercial purposes.
With its ultra compact design and extended temperature range it’s adaptable to any custom baseboard.
Can be used as a standalone computer without the need of a baseboard.
You don’t need anything more than a USB cable to power the computer-on-module and communicate with it by using Ethernet over USB gadget implementation.
It is based on TI’s 1GHz AM3703 processor which has an advanced Cortex-A8 ARM CPU.
The AM37xx Family processors are based on the enhanced device architecture and are integrated on 45nm process technology.
Compact and powerfull core for new products
Reduce time to market
Low power comsumption
Industrial Tempurature Range (-40 to +85 ºC)
Extended life range
Expansion boards available
FREE reference design
OPEN SOURCE software
IGEP Community
advantages
highlights This architecture of high performance applications processor is designed to provide best in class ARM and graphics performance while delivering low power consumption.
pay for only what you needARM Cortex-A8 AM3703 CPU 1GHZ / 256 Megabytes RAM + 512 Megabytes FLASH
Portable data terminals
Navigation
Auto Infotainment
Gaming
Medical imaging
Home automation
Human Interface
Industrial Control
Test and Measurement
Single board computers
Audio and image processing
applications
IGEP™ COM ELECTRON
INDUSTRIAL LONG LIFETemperature range -40ºC to 85ºC
overview"#$"%#&
Micro-SD Power management and audio codec
USB 2.0 OTG
Pop Memory (DDR RAM + FLASH)
AM3703
block diagram
J1, J
4 co
nnec
tors
USB mini-AB
USB3326
I2C
SPI
GPIO
PWM
IrDA/CIR
MMC/SDIO
MCBSP
UART
USB HOST
PMICTPS65950
ARM Cortex-A8 Core
Memory: 256 MBFlash: 512 MB
General Purpose Memory Controller (GPMC)
AM3703
POWERPWMGPIO
MADC
AUDIO
USB PHY
processoron board connectorsand devices
memory and storagepower
micro-SD
LED
USB OTG Display Controller
LED
J1, J
4 co
nnec
tors
Vallespir 19, planta 1Sant Cugat del Vallès - 08173 Barcelona - Spain+34 935 763 931 / +34 935 763 [email protected] - www.iseebcn.com
1cm
09/1
2
IGEP™ COM ELECTRON
ARM CPU Texas Instruments AM3703 (1GHz)L1 cache: 112 KB (DSP), 64 KB (ARM)L2 cache: 96 KB (DSP), 256 KB (ARM)NEON SIMD CoprocessorDMA, Interrupt controllers, TimersDDS, Display controller
Connectors 1 x USB 2.0 OTG interface + USB mini-AB connector1 x MICRO-SD socket2 x EXPANSION 70-pin connector
Devices 1 x USB 2.0 HOST (connector NOT included)1 x DOUBLE LED INDICATOR
Power from expansion connectors
Supply Voltage from 3.5 V to 4.2 V DC +-10%
Power from USB OTG connector
5V DC through USB 2.0 OTG (only for standalone operation)
Feature Specifications
Feature Specifications Feature Specifications
RAM Memory 256 MB Mobile DDR, 200 MHz,32-bit
Storage 512 MB NANDFLASH
On board micro-SD socket
Feature Specifications
Scale image 100%
Bottom side Top side