IESNA LM-79: 2008 - EiKO · IESNA LM-28-89 – 1989: Guide for the Selection, Care, and Use of...

Note: This report is not valid as a BEST Test Report unless signed by an approved BEST Test Service Shenzhen Co., Ltd. This report shall not be reproduced except in full w ithout the written approval of the testing laboratory. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. This report is for the exclusive use of BEST’s Client and is provided pursuant to the agreement between BEST and its Client. BEST’s responsibility and Liability are limited to the terms and conditions of the agreement. BEST assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the BEST name or one of its marks for the sale or adver tisement of the tested material, product or service must f irst be approved in writing by BEST. The observations and test results in this report are relevant only to the sample tested. This report by itself does not cover that the material, product, of service is or has ever been under a BEST certif ication program. National Voluntary Laboratory Accreditation Program (NVLAP) has accredited this laboratory under ISO17025: 2005 for specif ic laboratory activities as listed in the NVLAP directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation. This report must not be used by the client to claim product endorsement by NVLAP, NIST or any agency of the U.S. Government.

IESNA LM-79: 2008

Measurement and Test Report

for

EIKO GLOBAL, LLC 23220 W 84th St, Shawnee, KS 66227

Nov 09, 2015

Product Name: LED HID REPLACEMENT

Model No: LED100WPT50KMOG-G6

Test Engineer: David Zhang

Report No.: BTR66.181.15.0019.51

Sample Received Date: Nov 04, 2015

Test Performed Date: Nov 04, 2015 to Nov 09, 2015

Reviewed By: Steven Hsu

Prepared By: BEST Test Service Shenzhen Co., Ltd. 1st Floor, 1st Building, Weitai Industrial Park, Yingrenshi, Shiyan, Baoan, Shenzhen, China TEL: +86-755-28236006 FAX: +86-755-23467087-811 Email: [email protected]

h C Ltd

EIKO GLOBAL, LLC Model: LED100WPT50KMOG-G6

Report No.BTR66.181.15.0019.51 of 9 IESNA LM-79 Test Report

TABLE OF CONTENTS

1 - GENERAL INFORMATION .................................................................................................................................................. 3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT).................................................................................. 3 1.2 OBJECTIVE.............................................................................................................................................................................. 3 1.3 TEST FACILITY DESCRIPTION ............................................................................................................................................. 3 1.4 TEST EQUIPMENT LIST ......................................................................................................................................................... 4

2 - TEST METHOD ........................................................................................................................................................................ 5 2.1 PHOTOMETRIC AND ELECTRICAL MEASUREMENT (INTEGRATED SPHERE METHOD).............................................. 5 2.2 PHOTOMETRIC AND ELECTRICAL MEASUREMENT (GONIOPHOTOMETER METHOD) ............................................... 5 2.3 DEVIATION FROM STANDARD OPERATING PROCEDURE ................................................................................................. 5

3 – SUMMARY OF TEST RESULT ......................................................................................................................................... 6

4 – SPECTRAL FLUX PLOTS .................................................................................................................................................. 7

5 – EUT PHOTOS .......................................................................................................................................................................... 8

6 – LUMINOUS INTENSITY DISTRIBUTION TEST PLOTS (CIE CHROMATICITY)........................................... 9



1 - GENERAL INFORMATION 1.1 Product Description for Equipment under Test (EUT)

Applicant : EIKO GLOBAL, LLCProduct Name : LED HID REPLACEMENTModel No : LED100WPT50KMOG-G6Brand : EIKONominal Operation Voltage : AC 100-277V Nominal Power : 100W Nominal CCT : 5000K Nominal CRI : >80Nominal Lumen Output : 11900Lumens Nominal Life Time : 50000Hours Number of hours operated prior to measurement for new sample : 0 Hours

Stabilization Time : 1.5 hours Total operating time for measurement include stabilization time : 3.5 hours

Date of Receiving Sample : Nov 04, 2015 Measurement quantities measured : 1 pcs Orientation During Testing : Base up Test Requested : Electrical and Photometric Test

Luminous Intensity Distribution Test THD

1.2 Objective The following test report is prepared on behalf of EIKO GLOBAL, LLC in accordance with IESNA LM-79-08, used the

following American National Standards or illumination Engineering Society of North America test guides:

ANSI C78.377-2008: Specifications for the Chromaticity of Solid State Lighting Products ; ANSI C79.1– 2002: American National Standard for Electric Lamps – Nomenclature for Glass Bulbs Intended for Use with Electric Lamps; ANSI C78.20 – 2003: American National Standard for Electric Lamps – A, G, PS, and Similar Shapes with E26 Medium Screw Bases; ANSI C78.21 – 2011: American National Standard for Electric Lamps – PAR and R Shapes; ANSI C78.24 – 2001: American National Standard for Electric Lamps – Two-inch (51 mm); Integral-reflector Lamps with Front Covers and GU5.3 or GX 5.3 Bases; ANSI/IEC C81.61-2003: American National Standard for Electric Lamp Bases ; ANSI/IEEE C62.41 – 1991 (01-May-1991): Surge Voltages in Low-Voltage AC Power Circuits, Recommended Practice for; CIE Publication No. 13.3 – 1995: Method of Measuring and Specifying Color Rendering of Light Sources; CIE Publication No. 18.2 – 1983: The Basis of Physical Photometry; IESNA LM-16-1993: Practical Guide to Colorimetry of Light Sources; IESNA LM-28-89 – 1989: Guide for the Selection, Care, and Use of Electrical Instruments in the Photometric Laboratory; IESNA LM-79-08 Electrical and Photometric Measurement of Solid State Lighting Products UL 1993 – 1999: Standard for Self-Ballasted Lamps and Lamp Adapters ; UL 8750 – 2009: Light Emitting Diode (LED) Equipment for Use in Lighting Products .

1.3 Test Facility Description The Energy Efficiency Lab used by BEST to collect energy efficiency measurement data is located in 1st Floor, 1st Building, Weitai Industrial Park, Yingrenshi, Shiyan, Baoan, Shenzhen, China. BEST Test Service Shenzhen Co., Ltd



is a National Institute of Standards and Technology (NIST) accredited laboratory, under the National Voluntary Laboratory Accredited Program (Lab Code 200770-0). BEST Test Service Shenzhen Co., Ltd is also an ELI accredited lab for lighting products (ELI Certificate No. ELI-L04-2010) and UL accredited lab for lighting products

1.4 Test Equipment List Apparatus List Device Cal. Date Cal Due Date

1 Integral Sphere+ Spectrophotometer System Mar 10, 2015 Mar 09, 2016

2 Digital Power Meter Oct 18, 2015 Oct 17, 2016

3 Goniophotometer+ Spectrophotometer System Nov 20, 2014 Nov 19, 2015

4 Standard Light Source Sep 17, 2015 Sep 16, 2016

5 Standard Light Source Sep 17, 2015 Sep 16, 2016

6 Digital Storage Oscilloscope Oct 18, 2015 Oct 17, 2016

7 Ultra Compact Simulator Oct 20, 2015 Oct 19, 2016

8 Temperature Chamber Oct 20, 2015 Oct 19, 2016

9 Digital Caliper Nov 20, 2014 Nov 19, 2015

10 Digital CC&CV DC Power Supply(30V 5A) N/A N/A

11 5 1/2 Digital Multimeter Oct 18, 2015 Oct 17, 2016

12 Digital CC&CV DC Power Supply(120V 10A) N/A N/A

13 6 1/2 Digital Multimeter Oct 18, 2015 Oct 17, 2016

14 Digital Multimeter Oct 18, 2015 Oct 17, 2016

15 Temperature Recorder+Thermocouple Nov 20, 2014 Nov 19, 2015

16 Timer Controller Nov 20, 2014 Nov 19, 2015 Statement of Traceability: BEST Test Service Shenzhen Co., Ltd. certifies that all calibration has been performed using suitable standards traceable to the NIM China.



2 - Test Method

2.1 Photometric and Electrical Measurement (Integrated Sphere Method)

Total light output (luminous flux) for the 25 1 ambient temperature conditions is measured using a 1.6m 4geometry integrating sphere. Temperature is measured at a position inside the sphere. Spectral radiant flux measurements are made using Lab sphere to the detector port of the integrating s phere. Each lamp is operated at rated voltage in its designated orientation. Each lamp should be stable before measurements are made. The determining method of stable is as follows:

Step 1 Take 3 measurements of the lamp light output at 15 minute interval (total time=30mintues.)This time period is in addition to the recommended pre-burning time.

Step 2 Calculate the percent difference between the maximum measured value and the minimum measured value for the three consecutive measurements.

Step 3 if the value calculated in Step 2 does not exceed 0.5 percent, the lamp is considered stable. Luminous flux, chromaticity coordinates, correlated color temperature and color rendering index for each lamp are calculated from the spectral radiant flux measurements taken at 2 nm intervals over the range 350 to 1050 nm. The calibration of the sphere photometer-spectrometer system is traceable to the NIST USA. Lamp efficacy (lumens per watts) for each lamp model is computed based on the revised luminous flux result. Electrical measurements including voltage, current, power and power factor are measured using the digital power Meter.

The total uncertainty of the light output measurements is estimated, at the 95% confidence level, not to exceed ±1.12% over the wavelength range 350-1050 nm.

2.2 Photometric and Electrical Measurement (GonioPhotometer Method)

A Goniometer was used to measure the intensity (candelas) at each angle of distribution for each sample; the photometric distance is 24m. Ambient temperature was measured equal to the height of the sample mounted on the Goniometer equipment. Each sample was operated at input rated voltage in its designated orientation. Each sample was allowed to be stable before measurement was made. Electrical measurements including voltage, current, power and power factor were measured using the Power Analyzer

Before each measurement, the method below should be used to determine the lamp is stable or not.

Step 1 Take 3 measurements of the lamp intensity at 15 minute interval (tota l time=30mintues.)This time period is in addition to the recommended pre-burning time.

Step 2 Calculate the percent difference between the maximum measured value and the minimum measured value for the three consecutive measurements.

Step 3 if the value calculated in Step 2 does not exceed 0.5 percent, the lamp is considered stable.

Some graphics were created with Photometric Plus software.

2.3 Deviation from standard operating procedure

None.



3 – Summary of Test Result

Item Test Result Accreditation

Required Fields

ITHD 8.30% NVLAP/EPA

Lumen Output (Lumens) 11950.00 NVLAP/EPA

Luminous Efficacy (lm/w) 120.56 NVLAP/EPA

Correlated Color Temperature (CCT) 5213 NVLAP/EPA

Color Rendering Index– CRI 85.6 NVLAP/EPA

Input Power (W) 99.12 NVLAP/EPA

Optional Fields

Power Type AC DC /

Input Voltage (V) 120.0 NVLAP/EPA

Input Current (A) 0.8338 NVLAP/EPA

Power Factor 0.9905 NVLAP/EPA

x(CIE 1931) 0.3385 NVLAP/EPA

y(CIE 1931) 0.3399 NVLAP/EPA

u’ (CIE 1976) 0.2115 NVLAP/EPA

v’ (CIE 1976) 0.4778 NVLAP/EPA

Duv(CIE 1976) -0.0044 NVLAP/EPA

R9 25 NVLAP/EPA

Beam Angle: (Degree) 303.2 NVLAP/EPA

Center beam candlepower: (cd) 1246 NVLAP/EPA

Zonal lumen density (0-60°): 26.7% NVLAP/EPA






4 – Spectral Flux Plots



5 – EUT Photos



6 – Luminous Intensity Distribution Test Plots (CIE Chromaticity) This page is blank and see next page.

BEST TEST SERVICE SHENZHEN CO.,LTD Page 1 Of 14

LUMINAIRE PHOTOMETRIC TEST REPORT

NAME:

SPEC.:

MFR.: EIKO GLOBAL, LLC

TYPE:LED100WPT50KMOG-G6

DIM.:

SUR.:

WEIGHT:

SERIAL No.:

PROTECTION ANGLE:

Test:U:120.0V I:0.8338A P:99.12W PF:0.9905 Lamp Flux:11950x1 lm

0

30

60

90

120

150

-/+180

-150

-120

-90

-60

-30

UNIT:cdC0/180,302.6deg

UNIT:cd

C90/270,303.8deg

AVERAGE BEAM ANGLE(50%):303.2 DEG

0

300

600

900

1200

1500

LUMINOUS INTENSITY DISTRIBUTION DIAGRAM PLANAR ISOLUX DIAGRAM(UNIT:lx)

MH=1m

S(m)0

1

2

3

90

80

70

60

50

40

30

20100

C(DEG)

520460390330260

20066.033.020.06.60

DATA OF LAMP PHOTOMETRIC DATA Eff: 120.56 lm/W

MODEL

NOMINAL POWER(W)

RATED VOLTAGE(V)

NOMINAL FLUX(lm)

LAMPS INSIDE

TEST VOLTAGE(V)

Imax(cd)

LOR(%)

TOTAL FLUX(lm)

CIE CLASS

up(%)

down(%)

S/MH(C0/180)

S/MH(C90/270)

UP,DN(C0-180)

UP,DN(C180-360)

CIBSE SHR NOM

CIBSE SHR MAX

LED100WPT50KMOG-G6

100

120.0

11950

1

120.0

1246

100.0

11950

DIFFUSE

42.3

57.7

2.28

2.28

20.9,28.9

21.4,28.8

2.00

0.00

C Range: 0 - 360DEGC Interval: 22.5DEG

Range: 0 - 180DEG Interval: 1.0DEG

Test Speed: HIGH Test System:EVERFINE GO-R5000_V2 SYSTEM V2.0.287Temperature:25.6DEG Humidity:67.1%

Test Distance:2.455m [K=1.0000]Operators:DavidTest Date:2015-11-06 Remarks:


ZONAL FLUX DIAGRAMAND LUMINANCE LIMITATION CURVES

ZONAL FLUX DIAGRAM:

10 0- 10

20 10- 20

30 20- 30

40 30- 40

50 40- 50

60 50- 60

70 60- 70

80 70- 80

90 80- 90

100 90-100

110 100-110

120 110-120

130 120-130

140 130-140

150 140-150

160 150-160

170 160-170

180 170-180

C0 C45 C90 C135 C180 C225 C270 C315 zone total %lum,lamp

DEG LUMINOUS INTENSITY:cd UNIT:lm

664.2 664.2 663.2 656.2 656.5 653.8 656.0 657.5 61.78 61.78 0.52,0.52

783.1 791.9 779.4 774.8 755.8 761.6 758.3 765.4 202.5 264.3 2.21,2.21

941.2 953.3 924.1 932.4 902.7 923.3 902.3 924.8 394.2 658.5 5.51,5.51

1074 1094 1046 1080 1029 1057 1027 1054 624.3 1283 10.7,10.7

1156 1184 1125 1175 1123 1152 1115 1153 860.2 2143 17.9,17.9

1190 1224 1159 1225 1150 1203 1149 1204 1051 3194 26.7,26.7

1181 1234 1149 1231 1162 1219 1156 1215 1189 4383 36.7,36.7

1143 1200 1112 1215 1133 1194 1127 1196 1255 5638 47.2,47.2

1107 1178 1097 1200 1115 1172 1094 1167 1261 6899 57.7,57.7

1067 1142 1073 1172 1094 1148 1071 1140 1239 8139 68.1,68.1

996.2 1048 999.3 1081 1022 1068 1001 1058 1147 9286 77.7,77.7

859.2 909.4 869.2 940.0 892.9 932.7 871.6 921.3 966.1 10252 85.8,85.8

712.7 745.5 732.7 777.1 753.6 780.7 735.1 766.8 745.8 10998 92,92

523.1 547.8 550.0 576.4 569.5 594.6 553.5 574.5 513.9 11512 96.3,96.3

324.2 339.4 350.8 363.8 368.6 367.7 365.1 367.5 291.2 11803 98.8,98.8

131.9 141.4 155.1 160.3 170.7 170.6 170.8 165.1 120.5 11923 99.8,99.8

17.72 17.91 22.06 24.56 30.84 31.98 31.56 30.22 25.66 11949 100,100

0.1677 0 0.0347 0.0514 0.1097 0.0579 0.0529 0.0529 1.039 11950 100,100

LUMINANCE LIMITATION CURVES

GLARE CLASS ILLUMINANCE (lx)

1.15 A 2000 1000 500 <=300

1.50 B 2000 1000 500 <=300

1.85 C 2000 1000 500 <=300

2.20 D 2000 1000 500 <=300

2.55 E 2000 1000 500 <=300a b c d e f g h

45

55

65

75

85G(DEG)

8 1000 2 3 4 5 6 8 10000 2 3 4 1

2

3

4

68

a/h

LUMINANCE (cd/(m2))

a b c d e f g h

C0/180 C90/270

LUMINANCE cd/(m2)

G(DEG) C0/180 C90/270

85 6418015 6334575

80 3290215 3201607

75 2267824 2193663

70 1726996 1680131

65 1408058 1367366

60 1189820 1158526

55 1026842 1000487

50 899402 875044

45 793676 774594






CU AND LUMINAIRE BUDGETARY ESTIMATE DIAGRAM

NAME:

SPEC.:



DIM.:

SUR.:

WEIGHT:

SERIAL No.:

PROTECTION ANGLE:


cc

w

fc

RCR Coefficients of Utilization(CU)RCR:Room Cavity Ratio

80%

50% 30% 10%

20%

70%

50% 30% 10%

20%

50%

50% 30% 10%

20%

30%

50% 30% 10%

20%

10%

50% 30% 10%

20%

0

0

0

0.0

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

1.09

.87

.73

.63

.54

.48

.42

.38

.34

.31

.28

1.09

.82

.65

.53

.45

.38

.33

.29

.25

.23

.20

1.09

.76

.58

.46

.37

.31

.26

.22

.19

.17

.15

1.02

.81

.68

.58

.50

.44

.39

.35

.32

.29

.26

1.02

.76

.60

.49

.41

.35

.31

.27

.24

.21

.19

1.02

.71

.54

.43

.35

.29

.24

.21

.18

.16

.14

.88

.69

.57

.49

.42

.37

.33

.30

.27

.24

.22

.88

.65

.51

.42

.35

.30

.26

.23

.20

.18

.16

.88

.61

.46

.37

.30

.25

.21

.18

.15

.13

.12

.75

.58

.48

.40

.35

.31

.27

.25

.22

.20

.19

.75

.55

.43

.35

.29

.25

.22

.19

.17

.15

.14

.75

.52

.39

.31

.25

.21

.17

.15

.13

.11

.10

.63

.47

.39

.33

.28

.25

.22

.20

.18

.17

.15

.63

.45

.35

.28

.24

.20

.17

.15

.14

.12

.11

.63

.43

.32

.25

.20

.17

.14

.12

.10

.09

.08

.58

.38

.27

.21

.16

.13

.11

.09

.08

.07

.06

AREA(m2)10 20 30 40 50 70 100 200 300 500 700 1k 2k 3k 4k 5k 7k2

3

4

5

6789

10

20

30

40

50LAMPS LUMINAIRE BUDGETARY DIAGRAM

4

55

66

H=7H=7

44

55

66

H=7H=7 CONDITIONSFLUX 5000lm

FACTOR 0.70Hdown 0.00mHwork 0.00m

Ework(AVE) 100lxcc w fc70 50 3050 30 20






WEC AND CCEC

NAME:

SPEC.:



DIM.:

SUR.:

WEIGHT:

SERIAL No.:

PROTECTION ANGLE:


cc

w

fc

RCR Wall Exitance Coeffcients(WEC)RCR:Room Cavity Ratio

80%

50% 30% 10%

20%

70%

50% 30% 10%

20%

50%

50% 30% 10%

20%

30%

50% 30% 10%

20%

10%

50% 30% 10%

20%

0

0

0

0.0

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

.430

.357

.310

.275

.248

.225

.207

.191

.177

.165

.244

.196

.165

.143

.126

.113

.102

.093

.086

.079

.077

.060

.049

.042

.037

.032

.029

.026

.024

.022

.409

.339

.294

.260

.234

.213

.195

.180

.167

.156

.234

.187

.157

.136

.120

.107

.097

.089

.081

.075

.074

.057

.047

.040

.035

.031

.028

.025

.023

.021

.372

.304

.262

.231

.207

.188

.172

.159

.147

.138

.213

.169

.142

.123

.108

.096

.087

.079

.073

.067

.068

.053

.043

.037

.032

.028

.025

.023

.021

.019

.337

.272

.233

.205

.183

.165

.151

.139

.129

.120

.194

.153

.128

.110

.096

.086

.078

.071

.065

.060

.062

.048

.039

.033

.029

.025

.023

.020

.019

.017

.305

.243

.206

.180

.160

.144

.131

.121

.112

.104

.177

.137

.114

.098

.085

.076

.068

.062

.057

.052

.057

.043

.035

.030

.026

.023

.020

.018

.016

.015

cc

w

fc

RCR Ceiling Cavity Exitance Coefficients(CCEC)RCR:Room Cavity Ratio

80%

50% 30% 10%

20%

70%

50% 30% 10%

20%

50%

50% 30% 10%

20%

30%

50% 30% 10%

20%

10%

50% 30% 10%

20%

0

0

0

0.0

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

10.0

.512

.513

.508

.501

.493

.486

.478

.471

.465

.458

.453

.512

.480

.458

.443

.432

.423

.415

.409

.404

.399

.395

.512

.450

.417

.397

.384

.376

.370

.365

.362

.359

.357

.438

.439

.435

.429

.423

.417

.411

.406

.400

.395

.390

.438

.412

.395

.382

.373

.366

.360

.354

.350

.346

.343

.438

.387

.360

.344

.334

.327

.322

.318

.315

.313

.312

.299

.300

.298

.295

.291

.287

.284

.280

.277

.274

.271

.299

.283

.273

.266

.260

.255

.252

.249

.246

.244

.241

.299

.268

.251

.242

.235

.231

.228

.225

.224

.222

.221

.172

.173

.172

.170

.168

.166

.165

.163

.161

.159

.158

.172

.164

.159

.155

.152

.150

.148

.146

.145

.144

.143

.172

.156

.147

.142

.139

.137

.135

.134

.133

.133

.132

.055

.055

.055

.055

.054

.054

.053

.053

.052

.052

.051

.055

.053

.051

.050

.050

.049

.048

.048

.048

.047

.047

.055

.050

.048

.047

.046

.045

.045

.044

.044

.044

.044






UGR(Unified Glare Rating) Table

NAME:

SPEC.:



DIM.:

SUR.:

WEIGHT:

SERIAL No.:

PROTECTION ANGLE:


ceiling/cavity

walls

working plane

Room dimensions Viewed crosswise Viewed endwise

0.7 0.7

0.5 0.5

0.2 0.2

0.7 0.7

0.3 0.3

0.2 0.2

0.5 0.5

0.5 0.5

0.2 0.2

0.5 0.5

0.3 0.3

0.2 0.2

0.3 0.3

0.3 0.3

0.2 0.2

x = 2H y = 2H

3H

4H

6H

8H

12H

4H 2H

3H

4H

6H

8H

12H

8H 4H

6H

8H

12H

12H 4H

6H

8H

34.6 34.5 35.7 35.7 35.3 35.3 36.6 36.5 37.6 37.5

37.8 37.7 38.8 38.7 38.6 38.5 39.7 39.6 40.7 40.7

39.5 39.4 40.6 40.4 40.4 40.3 41.4 41.3 42.5 42.4

41.5 41.4 42.5 42.3 42.3 42.2 43.3 43.2 44.4 44.3

42.6 42.4 43.5 43.4 43.4 43.3 44.4 44.2 45.5 45.4

43.8 43.7 44.7 44.6 44.7 44.5 45.6 45.5 46.7 46.6

35.6 35.6 36.6 36.6 36.4 36.4 37.5 37.5 38.6 38.5

38.9 38.9 39.8 39.8 39.8 39.7 40.7 40.6 41.8 41.8

40.8 40.7 41.6 41.6 41.7 41.6 42.6 42.5 43.7 43.6

42.9 42.8 43.7 43.6 43.8 43.7 44.6 44.5 45.7 45.7

44.1 44.0 44.8 44.7 45.0 44.9 45.7 45.6 46.9 46.8

45.4 45.3 46.0 46.0 46.3 46.2 47.0 46.9 48.2 48.1

41.6 41.5 42.3 42.2 42.5 42.4 43.2 43.1 44.4 44.3

43.9 43.9 44.5 44.4 44.9 44.8 45.5 45.4 46.7 46.6

45.3 45.2 45.8 45.7 46.2 46.1 46.8 46.7 48.0 47.9

46.8 46.7 47.3 47.2 47.8 47.7 48.3 48.2 49.5 49.4

41.8 41.7 42.4 42.3 42.7 42.6 43.3 43.3 44.5 44.5

44.2 44.2 44.8 44.7 45.2 45.1 45.7 45.7 47.0 46.9

45.7 45.6 46.2 46.1 46.7 46.6 47.2 47.1 48.4 48.3

Variations with the observer position at spacings:

S = 1.0H + 0.1 / - 0.1 + 0.1 / - 0.1

1.5H + 0.2 / - 0.3 + 0.2 / - 0.3

2.0H + 0.3 / - 0.4 + 0.3 / - 0.4

CIE Pub.117 Corrected 11950 lm Total Lamp Luminous Flux.(8log(F/F0) = 8.6)






UTILIZATION FACTORS TABLE

NAME:

SPEC.:



DIM.:

SUR.:

WEIGHT:

SERIAL No.:

PROTECTION ANGLE:


REFLECTANCE

Ceiling

Walls

Working plane

0.8

0.7

0.2

0.8

0.5

0.2

0.8

0.3

0.2

0.7

0.7

0.2

0.7

0.5

0.2

0.7

0.3

0.2

0.5

0.7

0.2

0.5

0.5

0.2

0.5

0.3

0.2

0

0

0

ROOM INDEX UTILIZATION FACTORS(PERCENT) k(RI) x RCR = 5

k = 0.60 36 23 16 35 23 16 32 21 15 7

0.80 45 31 22 43 30 21 38 27 20 11

1.00 52 38 28 49 36 27 44 35 25 14

1.25 59 45 35 56 42 33 49 38 30 18

1.50 65 50 40 60 48 38 53 42 35 21

2.00 72 59 49 68 56 47 59 49 42 25

2.50 78 65 56 72 61 53 63 54 47 29

3.00 82 70 61 76 66 58 66 58 51 32

4.00 87 77 69 81 72 65 70 63 57 36

5.00 91 82 75 84 77 70 73 67 61 38

ROOM INDEX UF(total) Direct

According to DIN EN 13032-2 2004 SHRNOM = 1.25Suspended






ISOCANDELA DIAGRAM

NAME:

SPEC.:



DIM.:

SUR.:

WEIGHT:

SERIAL No.:

PROTECTION ANGLE:


-90-90

-80

-80

-70

-70

-60

-60

-50

-50

-40

-40

-30

-30

-20

-20

-10

-10

0

0

10

10

20

20

30

30

40

40

50

50

60

60

70

70

80

80

90

90

HORIZONTAL(DEG)

VERTICAL(DEG)

Imax:1246(H40.0,V-56.5) (At:C=45.0,Gamma=65.0)UNIT: cd

10% 124.620% 249.130% 373.740% 498.350% 622.860% 747.470% 872.080% 996.590% 1121

Conical surface Flux(90deg):1685.4 lm%lum = 14.1%%lamp = 14.1%

Conical surface Flux(120deg):3194.3 lm%lum = 26.7%%lamp = 26.7%






AAI Figure

NAME:

SPEC.:



DIM.:

SUR.:

WEIGHT:

SERIAL No.:

PROTECTION ANGLE:


1m3.281ft

200.00cm6.562ft

536.5,657.2lx49.84,61.06fc

2m6.562ft

400.00cm13.12ft

134.1,164.3lx12.46,15.26fc

3m9.843ft

600.00cm19.69ft

59.61,73.03lx5.538,6.784fc

4m13.12ft

800.00cm26.25ft

33.53,41.08lx3.115,3.816fc

5m16.4ft

1000.00cm32.81ft

21.46,26.29lx1.994,2.442fc

Height Eavg,Emax DiameterAngle:90.00deg

Flux out:1685 lm

Note:The Curves indicate the illuminated area and the average illumination when the luminaire is at different distance.






ISOLUX DIAGRAM

NAME:

SPEC.:



DIM.:

SUR.:

WEIGHT:

SERIAL No.:

PROTECTION ANGLE:


127.3' 38.81m

101.9' 31.05m

31.05m

101.9'

76.4' 23.28m

50.9' 15.52m

15.52m

50.9'

25.5' 7.76m

0.0' 0.00m

0.00m

0.0'

25.5' 7.76m

50.9' 15.52m

15.52m

50.9'

76.4' 23.28m

101.9' 31.05m

31.05m

101.9'

127.3' 38.81m

MOUNTING HEIGHT: 33'(10.0m)

3% 0.1971lx 0.01831fc

5% 0.3285lx 0.03052fc

10% 0.6570lx 0.06104fc

30% 1.971lx 0.1831fc

50% 3.285lx 0.3052fc






Planar Illuminance Curve

Planar Illuminance Curve

-25 -20 -15 -10 -5 0 5 10 15 20 25

Distance(m)

0

0.7

1.4

2.1

2.8

3.5

4.2

4.9

5.6

6.3

7E(lx) MH = 10 m

C0/180

C90/270






LUMINOUS DISTRIBUTION INTENSITY DATA

NAME:

SPEC.:



DIM.:

SUR.:

WEIGHT:

SERIAL No.:

PROTECTION ANGLE:


(DEG)

C(DEG) Table--1 UNIT: cd

0

0 641

5 647

10 664

15 716

20 783

25 865

30 941

35 1012

40 1074

45 1122

50 1156

55 1178

60 1190

65 1190

70 1181

75 1174

80 1143

85 1119

90 1107

95 1094

100 1067

105 1038

110 996

115 928

120 859

125 792

130 713

135 622

140 523

145 427

150 324

155 222

160 132

165 60.2

170 17.7

175 2.84

180 0.17

23

640

645

662

715

782

859

930

997

1059

1121

1152

1173

1192

1202

1199

1189

1165

1156

1146

1135

1112

1072

1021

958

888

808

729

631

530

430

327

226

132

60.1

15.3

1.85

0.00

45

640

643

664

717

792

877

953

1028

1094

1151

1184

1206

1224

1246

1234

1231

1200

1191

1178

1167

1142

1104

1048

984

909

827

745

649

548

444

339

234

141

65.4

17.9

1.73

0.00

68

640

642

664

716

782

857

932

999

1063

1112

1146

1171

1189

1198

1191

1186

1160

1151

1143

1134

1115

1082

1032

967

894

819

737

649

544

444

344

238

146

69.8

18.8

2.18

0.00

90

640

642

663

715

779

855

924

993

1046

1095

1125

1148

1159

1156

1149

1136

1112

1104

1097

1090

1073

1045

999

937

869

804

733

646

550

452

351

249

155

76.8

22.1

2.19

0.03

113

640

641

658

706

766

841

910

977

1036

1082

1113

1131

1142

1143

1146

1127

1106

1097

1090

1083

1065

1035

989

926

857

790

717

633

535

436

340

240

149

74.1

22.7

2.82

0.05

135

639

640

656

705

775

857

932

1003

1080

1138

1175

1206

1225

1244

1231

1237

1215

1207

1200

1191

1172

1137

1081

1014

940

863

777

686

576

468

364

255

160

80.0

24.6

3.25

0.05

158

639

640

654

697

757

837

906

979

1052

1117

1153

1176

1203

1219

1217

1212

1197

1190

1184

1176

1158

1125

1073

1007

935

857

775

683

577

471

366

256

164

83.5

27.2

3.97

0.05

180

641

641

657

696

756

834

903

968

1029

1085

1123

1139

1150

1163

1162

1154

1133

1121

1115

1109

1094

1067

1022

961

893

826

754

666

569

470

369

263

171

90.0

30.8

5.11

0.11

203

640

641

656

703

770

849

927

999

1059

1120

1159

1175

1196

1212

1208

1202

1180

1166

1158

1151

1134

1105

1059

997

927

857

782

694

597

497

395

272

167

88.7

30.8

5.21

0.11

225

640

641

654

695

762

842

923

988

1057

1125

1152

1180

1203

1216

1219

1209

1194

1182

1172

1165

1148

1118

1068

1002

933

860

781

696

595

486

368

257

171

93.0

32.0

5.71

0.06

248

640

642

655

700

765

834

918

987

1057

1126

1160

1195

1216

1232

1231

1226

1213

1193

1183

1175

1158

1129

1080

1014

944

869

787

696

584

473

374

266

172

91.8

31.3

6.03

0.05

270

640

643

656

696

758

826

902

970

1027

1083

1115

1144

1149

1159

1156

1157

1127

1106

1094

1086

1071

1044

1001

939

872

806

735

649

553

458

365

265

171

88.9

31.6

5.95

0.05

293

640

645

658

701

764

838

913

981

1042

1103

1143

1165

1179

1190

1188

1184

1164

1145

1134

1126

1110

1081

1035

972

903

833

759

669

569

471

379

269

166

83.5

29.9

5.95

0.05

315

639

646

657

702

765

841

925

989

1054

1117

1153

1181

1204

1218

1215

1220

1196

1179

1167

1157

1140

1109

1058

992

921

848

767

680

575

469

368

261

165

85.2

30.2

5.60

0.05

338

639

646

660

707

771

848

931

1003

1065

1126

1166

1195

1216

1227

1224

1220

1202

1186

1175

1160

1138

1102

1048

981

909

830

746

657

556

451

353

250

158

78.9

27.5

4.98

0.05





0 1020

30

40

50

60

70

80

90270

280

290

300

310

320

330

340350

ABAB

150

300

450

600

750

900

1050

1200

1350

1500

I(cd)

1000 lm K = 1

d/h

0

1

2

3

90

80

70

60

50

40

30

20100

40

3020

10 lx

5

S(m2)102 2 3 4 5 6 7 8 9103 2 3 4 5 6 7 8 91041

2

3

4

5

6789

10

20

30

40

50

60708090

100

N

4

5

H=64

5

H=6

F = 5000 lmK = 0.7Hcc = 0.0 mHfc = 0.0 mEave = 100 lx

Pcc Pw Pfc70 50 3050 30 20

IESNA LM-79: 2008 - EiKO · IESNA LM-28-89 – 1989: Guide for the Selection, Care, and Use of...

Documents

Transcript of IESNA LM-79: 2008 - EiKO · IESNA LM-28-89 – 1989: Guide for the Selection, Care, and Use of...