IES BIM Faculty - New IESVE Interoperability Navigator
Transcript of IES BIM Faculty - New IESVE Interoperability Navigator
![Page 1: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/1.jpg)
#BIMfaculty
BIM Faculty 2017 Importing Geometry & Data to the Virtual Environment
![Page 2: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/2.jpg)
Douglas Bell, IESDemonstration of the new IESVE Interoperability Navigator
![Page 3: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/3.jpg)
#BIMfaculty
Overview
Key Revit Modelling Points
Updates to Revit 2017
The New BIM Interoperability Navigator
![Page 4: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/4.jpg)
#BIMfaculty
Key Modelling Points - Revit
![Page 5: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/5.jpg)
#BIMfaculty
Rooms & Spaces
![Page 6: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/6.jpg)
#BIMfaculty
Area & Volume Computation
![Page 7: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/7.jpg)
#BIMfaculty
Revit Data Import
![Page 8: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/8.jpg)
#BIMfaculty
Export the Following Properties
NB: Using Revit Spaces all the data list below can be exported, but Using Revit Rooms only data highlighted in Blue can be exported.
• Location • Building type• Constructions• Room Names• Room type – Occupied/Plenum• Occupancy – Heat Gain/Per Person• Electrical – Lighting Loads – Power Loads
Basic Data Properties
![Page 9: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/9.jpg)
#BIMfaculty
Export Room Properties - Constructions
Make sure ‘Include Thermal Properties’ is ticked when exporting constructions from your Revit model utilising ROOMS placed within. If this is not selected analytical constructions will be exported.
Basic Data Properties
![Page 10: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/10.jpg)
#BIMfaculty
Export Space Properties
• Room Names• Room type – Occupied/Plenum• Occupancy – Heat Gain/Per Person• Electrical – Lighting Loads – Power Loads
Basic Data Properties
![Page 11: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/11.jpg)
#BIMfaculty
Tag Constructions/Export Thermal Properties – Revit 2016 & Earlier
Basic Data Properties
![Page 12: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/12.jpg)
#BIMfaculty
Constructions – Revit 2016 & Earlier
• Go to File > Export gbXML
• Make sure Export Default Values is ticked
• Open up Building Constructions
Basic Data Properties
![Page 13: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/13.jpg)
#BIMfaculty
Constructions – Revit 2016 & Earlier
Once in Building Constructions make sure the Override is unticked for all constructions
Basic Data Properties
![Page 14: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/14.jpg)
#BIMfaculty
Constructions – Revit 2017
• Go to ‘Analyze’ Tab > Energy Analysis• Click ‘Energy Settings’• Select Advanced > Other Options• In the Material Thermal Properties Tick
Detailed Elements
Basic Data Properties
![Page 15: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/15.jpg)
#BIMfaculty
Constructions – Revit 2017
• Go to File > Export gbXML• Select ‘Use Room/Space Volumes• Make sure Export Default Values is
ticked
• Open up Building Constructions
Basic Data Properties
![Page 16: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/16.jpg)
#BIMfaculty
Constructions – Revit 2017
Once in Building Constructions make sure the Override is Ticked for all constructions
NB: this is the opposite to Revit 2016
Basic Data Properties
![Page 17: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/17.jpg)
#BIMfaculty
The following checklists/tips are items that are necessary in your Revit model before the translation to a design /building performance model. The following pages of this document will describe in more detail each of these items. 1. Rooms (refer to Section 1.9 - Rooms)Make sure all rooms/spaces are place in every room, and adjacencies of Rooms are correct. 2. Room Bounding Elements (refer to Section 1.12)Check or uncheck room bounding elements that is necessary for design / building Performance model. For example, you can make shaft walls that are located on the exterior side of walls to be non-room bounding rather than placing a separate room into them. If an interior space has many ½ walls or jogs (that protrudes into but does not divide two spaces), these walls can often be made non-room bounding and leave a simple room perimeter to bound the space. Think about where you really need to take account of the walls for your type of analysis. 3. Define all Upper and Lower Boundary (refer to Section 1.14 - Defining the Upper & Lower Boundary) Make sure all the Upper and Lower Limits and Offsets are correct 4. Project Information (refer to Section 1.8 - Project Information)Make sure the Energy Data parameter in the Project Information is filled out correctly either in the plugin if you are using that for export or in Revit project information if you are using Revit to export. 5. Room Volume Computations (refer to Section 1.15 - Room Volume Computations)Make sure Room Volume Computations is checked
Check List
![Page 18: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/18.jpg)
#BIMfaculty
6. If it’s a central model, detach from central. Clean up views, elements that are not related to energy analysis (casework, railings, etc.), and purge unused. This will help reduce the size of the file. 7. Try to keep the model as lean as possible in Revit,This will be worth it when trying to run analysis and will impact runtime greatly. Only keep elements essential to the gbXML. Many firms have separate Revit construction document models and Revit analysis models, though in the future hopefully that will change. Simplicity of your model is paramount. 8. Run a model check once in the VE.
Check List
![Page 19: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/19.jpg)
#BIMfaculty
• Check What Revit is ExportingGo to File > Export gbXML > Details Tab > Select Analytical Surfaces option
• Check Rooms/Space fill the model
• Check the Levels they are set at
• Check Import/Export Settings
Helpful Tips
![Page 20: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/20.jpg)
#BIMfaculty
BIM Interoperability Navigator
![Page 21: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/21.jpg)
#BIMfaculty
BIM Interoperability Navigator
All Information in one place
All Settings in one place
![Page 22: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/22.jpg)
#BIMfaculty
Guidance to check off
Best practice modelling information
BIM Interoperability Navigator
![Page 23: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/23.jpg)
#BIMfaculty
New Quarantine Zone
Add Clarity to the Process
Visibly see the import process
BIM Interoperability Navigator
![Page 24: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/24.jpg)
#BIMfaculty
Improvements to shell correction
View geometry errors in tree view
BIM Interoperability Navigator
![Page 25: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/25.jpg)
#BIMfaculty
Improvements to shell correction
View geometry errors in tree view
BIM Interoperability Navigator
![Page 26: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/26.jpg)
#BIMfaculty
View surface orientation in viewer
BIM Interoperability Navigator
![Page 27: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/27.jpg)
#BIMfaculty
Correct (Shell)
Report
Cap Volumes
Check Gaps
Front Elevation
Filter Surfaces
BIM Interoperability Navigator
![Page 28: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/28.jpg)
#BIMfaculty
Cap Volumes
BIM Interoperability Navigator
![Page 29: IES BIM Faculty - New IESVE Interoperability Navigator](https://reader035.fdocuments.in/reader035/viewer/2022062503/58edf58a1a28abdf688b4625/html5/thumbnails/29.jpg)
#BIMfaculty
Data Only
Geometry Only
Geometry & Assigned Data
Geometry & All Data
Use Merge Wizard
BIM Interoperability Navigator