IEC 61850 enabled UniGear

IEC 61850 enabled UniGearMay 2013

Tenders

0 1 0 0 1 1 0 0 1 0 0 1 1 0 1 0 1 0 1 0 0 1 0 1 0 1 1 1 1 0 0 0 1 0 1 0 1 0 1 00 1 1 0 0 0 1 1 1 0 0 1 0 1 0 1 0 1 0 1 1 0 1 0 1 0 1 1 1 1 0 0 0 1 1 0 1 0 1 00 1 0 1 0 1 0 1 0 1 0 0 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 1 1 1 1 1 1 0 1 0 1 0 1 0

© ABB GroupApril 22, 2023 | Slide 2

IEC 61850 enabled MV Primary switchgearMain Accessories

ABB’s Relion® IEDs with IEC 61850 native support Managed Ethernet Switch/esCommunication Links

H01 H02 H03 H04 H05


IEC 61850 enabled MV Primary switchgearMain Accessories / IED with IEC 61850-8-1 interface

Converter is needed (communication gateway, card …) Supported communication

Vertical


IEC 61850 enabled MV Primary switchgearMain Accessories / IED with IEC 61850-8-1 interface

Relion® protection and control True, native support for IEC 61850 Supported communications

Vertical Horizontal GOOSE

Dedicated web page www.abb.com/relion

http://www.abb.com/relion


IEC 61850 enabled MV Primary switchgearMain Accessories / Ethernet Switch

Managed Ethernet Switch “Substation hardened” to the same level as IEDs Recommended to use all switches from the same vendor,

especially when building ring architecture

ABB AFS family


IEC 61850 enabled MV Primary switchgearMain Accessories / Ethernet Switch

Managed Ethernet Switch Type of switch

Compact – Fixed number of ports (connections) Modular – Variable number of ports and their types

Type of Port Copper / Fiber


IEC 61850 enabled MV Primary switchgearMain Accessories / Communication Links

Optical: Duplex Patch cord with LC-LC connectors

Patch cord (cable) Electrical or optical cable

used to connect one device to another for data routing

It is terminated by connectors on both ends

Electrical cable is susceptible to EMI, therefore should be only used inside cabinets

Electrical : STP cable Cat.6 or better with RJ45-RJ45 connectors

LC

RJ45


IEC 61850 enabled MV Primary switchgearSingle Network Architecture

Typical architecture IEDs are connected directly to Managed Ethernet switch

Supported by all IEDs

Backbone Ring network

… …


IEC 61850 enabled MV Primary switchgearRing (Self-healing)

Data is sent into both directions on the ring Essential part is Managed Ethernet switch Supported by 611, 615 (except RED), 620 Series IEDs

max. 30 IEDs


IEC 61850 enabled MV Primary switchgearRing (HSR) - Redundant Network Architecture

High-availability Seamless Redundancy (HSR) Same data is sent into both directions on the ring Eliminating communication downtime Supported by 615 Series IEC (except RED) and 620 Series IEC

max. 30 IEDs


IEC 61850 enabled MV Primary switchgearDouble (PRP) - Redundant Network Architecture

Parallel Redundancy Protocol (PRP) Same data is sent to both networks with identical topology Eliminating communication downtime Supported by 615 Series IEC (except RED) and 620 Series IEC

LAN BLA

N A


IEC 61850 enabled MV Primary switchgearEthernet Network Topology

Ring Built-in redundancy Centralized /Decentralized

Interconnection Fiber optic

Ring Network Topology

Decentralized ring Architecture


IEC 61850 enabled MV Primary switchgearAccessories Layout

Ethernet switch RSG2100 assembled in LVC of UniGear

Location Inside Low Voltage

Compartment of the switchgear panels

Typically in Bus riser, Metering panel

Main benefits Cubicles are ready for

connection Saving space in

substation building Shorter communication

links Cheaper solution


IEC 61850 enabled MV Primary switchgearUniGear Pro

Global Tendering Tool for Air-insulated UniGear panels


IEC 61850 enabled MV Primary switchgearIED Communication Protocol and Media

3. Select IED Communication protocol• IEC61850 Single + GOOSE• IEC61850 Ring (Self-healing) + GOOSE• IEC61850 Ring (HSR) + GOOSE• IEC61850 Double (PRP) + GOOSE• IEC61850 Single• IEC61850 Ring (Self-healing)• IEC61850 Ring (HSR)• IEC61850 Double (PRP)

4. Select Communication media• Galvanic (RJ45)• Optic Glass Fiber

1. Open Switchgeardata window

2. Select tab Control


3. Select sub-tabRelays

2. Select tabFunctional unit

1. Open Paneldata window

4. Press Add button

IEC 61850 enabled MV Primary switchgearIntelligent Electronic Device (Relay)

5. Select Relay Applied filters• Communication protocol• Communication medium

6. Press OK button


IEC 61850 enabled MV Primary switchgearEthernet Switches

1. Open Switchgear data or Panel data window

2. Select tab Additional articles

3. Select TypeCommunications

4. Select MakeABB …

5. Select VariantEthernet Switches

6. Select Type of Ethernet Switch

7. Press Add button


IEC 61850 enabled MV Primary switchgearCommunication cables (Patchcords)

1. Open Switchgear data or Panel data window

3. Select sub-tab Additional articles

4. Select TypeCommunications

5. Select MakeMiscellaneous

6. Select VariantPatchcords

7. Select Type of Patchcord

8. Press Add button

2. Select tab Functional unit

IEC 61850 enabled UniGear

Documents

Transcript of IEC 61850 enabled UniGear