IEC 61508:2010 - Valvometal · CERTIFICATO No registrazione certificato 70 900 4629 Rapporto di...
2
Certificate registration No. 70 900 4629 Audit report No. 4329 8985 First certification 2017-12-21 Certificate valid from 2017-12-21 to 2020-12-20 scope: PAGE 1 OF 1. This certification was conducted in accordance with the TÜV PROFiCERT-plus auditing and certification procedures and is subject to regular surveillance audits. Verifiable under www.tuev-club.de. Original certificates contain a glued on hologram. TÜV Technische Überwachung Hessen GmbH, Robert-Bosch-Straße 16, D-64293 Darmstadt, Tel. +49 6151/600331 Rev-GB-1711 Darmstadt, 2017-12-21 Certification body of TÜV Hessen – Head of Certification body – IEC 61508:2010 (Parts 1-7 - Functional safety of electrical/electronic/programmable electronic safety-related systems) for By means of periodical audits it is assured, that the inspection process assures the product/service conformity including all requirements therefor. This certificate does not acquit the company of its responsibility for the compliance with all legal requirements and service properties. Sitindustrie Valvometal - Ital Parts Group S.r.l. Registered Office: Via per Cuggiono, 7 - I - 20022 Castano Primo (MI) Operating Site: Via Orlonghetto, 3 - I - 13018 Valduggia (VC) Compliance of Side Entry Ball Valves - Type 09; Top Entry Ball Valves - Type 09; Gate Valves - Type 01; Through Conduit Gate Valves - Type 04 (ref. Report n° 51312-1-R rev. 00) Scope: 18G02 (EA: 17/2)
Transcript of IEC 61508:2010 - Valvometal · CERTIFICATO No registrazione certificato 70 900 4629 Rapporto di...
CER TIFICATE
Certificate registration No. 70 900 4629
Audit report No. 4329 8985 First certification 2017-12-21
Certificate valid from 2017-12-21 to 2020-12-20
scope:
PAGE 1 OF 1. This certification was conducted in accordance with the TÜV PROFiCERT-plus auditing and certification procedures and is subject to
regular surveillance audits. Verifiable under www.tuev-club.de. Original certificates contain a glued on hologram.TÜV Technische Überwachung Hessen GmbH, Robert-Bosch-Straße 16, D-64293 Darmstadt, Tel. +49 6151/600331 Rev-GB-1711
Darmstadt, 2017-12-21 Certification body of TÜV Hessen
– Head of Certification body –
IEC 61508:2010 (Parts 1-7 - Functional safety of electrical/electronic/programmable electronic safety-related systems)
for
By means of periodical audits it is assured, that the inspection process assures the product/service conformity including all requirements therefor. This certificate does not acquit the company of its responsibility for the compliance with all legal requirements and service properties.
Sitindustrie Valvometal - Ital Parts Group S.r.l.Registered Office: Via per Cuggiono, 7 - I - 20022 Castano Primo (MI)
Operating Site: Via Orlonghetto, 3 - I - 13018 Valduggia (VC)
Compliance of Side Entry Ball Valves - Type 09; Top Entry Ball Valves - Type 09; Gate Valves - Type 01; Through Conduit Gate Valves - Type 04
(ref. Report n° 51312-1-R rev. 00)
Scope: 18G02 (EA: 17/2)
CER TIFICATO
No registrazione certificato 70 900 4629
Rapporto di Audit 4329 8985 Prima certificazione 2017-12-21
Certificato valido da 2017-12-21 a 2020-12-20
Campo di applicazione:
PAGINA 1 DI 1Questa certificazione è stata eseguita secondo la procedura TÜV PROFiCERT-plus per verifiche e certificazioni e viene periodicamente sorvegliata.
Verificabile sul sito www.tuev-club.de. I certificati originali contengono un ologramma incollato.TÜV Technische Überwachung Hessen GmbH, Robert-Bosch-Straße 16, D-64293 Darmstadt, Tel. +49 6151/600331 Rev-IT-1711
Darmstadt, 2017-12-21 Organismo di Certificazione del TÜV Hessen
– Responsabile della certificazione –
IEC 61508:2010 (Parts 1-7 - Functional safety of electrical/electronic/programmable electronic safety-related systems)
per
Attraverso lo strumento degli audit periodici è assicurato che il processo di ispezione del prodotto/servizio garantisce la conformità dello stesso a tutti i requisiti applicabili. Questo certificato non esonera l’azienda dalla sua responsabilità relativamente all’adempimento di tutti i requisiti legali applicabili e dal garantire le caratteristiche del servizio.
Sitindustrie Valvometal - Ital Parts Group S.r.l.Sede Legale: Via per Cuggiono, 7 - I - 20022 Castano Primo (MI)
Sede Operativa: Via Orlonghetto, 3 - I - 13018 Valduggia (VC)
Conformità di Side Entry Ball Valves -Type 09; Top Entry Ball Valves - Type 09; Gate Valves - Type 01; Through Conduit Gate Valves - Type 04
(ref. Report n° 51312-1-R rev. 00)
Scopo: 18G02 (EA: 17/2)
