Dewalt Catalogue Dewalt Catalogue Dewalt Catalogue Dewalt Catalogue Dewalt Catalogue
IDOEET Catalogue
-
Upload
tibor-grohmann -
Category
Documents
-
view
221 -
download
4
description
Transcript of IDOEET Catalogue
Mechanical material transportation
Design, manufacture, delivery and installation of : helical conveyors to the max. diameter 1 000 mmchain conveyors – max. transportation width 4 000 mm belt conveyors - max. transportation width 1 600 mm andbucket conveyors in different sizesrepair of different kinds of existing transportation systems
•••••
helical conveyors
chain conveyors
Pneumatic handling
complex solution of pneumatic conveying systems •
Flaps
Components of industrial air conditioning
Design, manufacture, delivery and installation of closing flaps and sliding valves:single bladed, more bladedjalousiemoving, duplexwith servo drive, pneumatic drive or hand control in all material version
••••
Complex solutions of exhaust and dedusting systems
Complex solutions of exhaust and dedusting systems – delivery on keyDesign and manufacture of chamber and round filters, cyclones, rotary feeders, ducts Measuring of air conditions in exhaust and dust removing systems, medium volume, medium speed ... Optimization of existing exhaust and dust removing systems – design, realisation of solutions, we can
solve following problems : ducts and filter choking, low effectivity of filters and exhaustion ...repair of existing exhaust and dust removing systems Field of application: building industry, paper and pulp industry, wood industry, power engineering,
metallurgy
••••
••
Cyclones
Steel constructions
design, manufacture, delivery and installation of steel constructions and platforms •
Steel constructions
Piping and diffErent kinds of ducts
Piping, ducts and silencers
Design, manufacture, delivery and installation of:round and angular ducts from diameter DN 100 to diameter DN 4 000/ from mild steel, boiler steels,
stainless steel, galvanized steel, flue gas ducts, low and high pressure pipings, insulated pipings, ducts with brickworks
textile and steel compensators
•
•
Deliveries in power engineering
Manufacture of pressure and non pressure parts of boilers in scope:
Non pressure parts of boiler:
Bypass ductsFlue gas ducts with or without insulation BandageExhaust piping and silencers
Pressure parts of boiler:
Low pressure drumsHigh pressure drumsHigh pressure and low pressure connecting
and irrigation piping Fine armatureComplete boiler modules including finned tubesParts of boiler modules:Low and high pressure evaporatorsLow and high pressure economizersLow and high pressure super heaters
••••
•••
•••
Silos, tanks
Silos, tanks
Design, manufacture, delivery and installation of: silos, tanks, vessels in different shapes and sizes common non pressure silos and tanks pressure tanks inclusive take over by the third party
•••
Manufacture according drawings from customer
Manufacture of various technological equipment according drawings from customer •
Manufacture according drawings from customer
Radial fans
own designmanufacture and transportationinstallationguarantee and after guarantee service ( bearing exchange, coupling setting with laser, belt gear setting
with laser )vibrodiagnostics repairs of older fans measuring of air parameters ( air volume, pressure, temperature )silencers, anti noise boxes
••••
••••
Radial fans
Installation
Our company as well as making individual facilities is also in charge of delivering complex works at turn-key. We are able to provide you an equipment from technical design, through production, installation, for putting in operation and behind-training of yours operating staff.
The company is keeping its own assembly team for the following purpose. We are equipped with the complete neces-sary utensils, lifting and operating techniques including a 20 tons car crane. The personnel are technically trained and are competent along with technicians to handle out occurred problems. There is the matter of course the managers of the assembling teams and of the technicians´ fluent knowledge of German language the assembling teams and of the technicians.
A long-time experience through the all continent and acquired know-how by installation of a dust removing, exhaust and forwarding equipment bringing into to ours jobs a hallmark of professionally and that make designed our com-pany to assembly an equipment, insulation of the equipment, disassembly old technology, alternatively repairs and renovation primal and also the facilities produced not by only by our company.
machine park
Technical - engineering equipment of the company: We produce a variety of machine products within the realms of the technical – engineering possibilities of our machine park according to the drawing documentation purchased by the customer. We state the primary data of the individual production facilities to get the picture about our company and its technical – engineering facilities.
DivisionPlaSma
Two CNC coordinate tables HS6001.20S ( table dimensions 2050x6100 mm ) for cutting by plasma from Microstep with coordinate system MSNC 500 and software for the creating the ASPERWIN cutting plans
Maximum stroke in axis Z is 150 mm, copying of the surface unevenness Plasma sources OTC DAIHEN D-12000 and HPR 260 enable to burn the sheets of thickness from 1 to 60 mm
Bend saw BOMAR 510x330-DGH – maximum cutting diameter 350mm PILOUS 220 – maximum cutting diameter 220mm
Hydraulic shears The producer of hydraulic shears is PASKOWSKY and STROJÁRNE PIESOK. Shears enables to cut up to the 16 thickness wit-hin clamping dimension mm 3100 mm.
Cold workingPress brake1. Safan with the maximum press power 1600kN, press length 4000mm2. CTO 400A maximum power 4000kN, press length 5000mm3. CTO 80l maximum power 800kN, press length 3000mm4. Semiautomatic sheet bending machine maximum length 2500mm and thickness 3mm5. Semiautomatic sheet bending machine maximum length 6000mm and thickness 3mm
Section roll bending machineBending machine XZPP75/9Bending machine XZPP100/16
Sheet bending machinesBending rolls Type XZMP3150/6,3 are produced in Piesok engineering plant. Maximum width of bending roll is 3150
mm, maximum thickness of bending roll is 6 mm and minimum diameter ф450mm.Portable sheet bending machine – maximum length of bending sheet is 2000mm, maximum thickness is 4mm and mini-
mal diameter ф 250mm Portable sheet bending machine – maximum length of bending sheet is 1000mm maximum thickness is 3mm and mini-
mal diameter ф 150mm
Pipe-bending machineSR 80 Schwarze – Robitec – compressive hydraulic bending tension maximum pipe diameter ф88,9x7,6SGF 060A – small portable bending machine maximum pipe diameter ф51x4 – R=150mm
Mechanical machine shopThere are following devices installed in the mechanical machine shop
1. LatheHigh-speed centre lathe SRH 100-3000, Lathe SUI 32 Versatile centre lathe SUI 63 Vertical lathe SKJ 12 A Centre lathe SU 125/10 000
•
••
••
••
•
•
•
••
•••••
2. Milling machinesVersatile milling machine FAR5U Versatile milling machine FGU32
3. Shaping machinesVertical shaping machine: Vertical trimmer Model 7045 Horizontal shaping machine INFRATIREA Model 594
4. Horizontal boring machineHorizontal boring machine WH63 Horizontal boring machine WH 80
5. GrindersCylindrical grinder maximum diameter 100mm and maximum diameter 500mm
6. Drilling machineMounting drill VR4 – 2ksMounting drill VR6
WeldingMIG/MAG: bypass sources with the water-cooled burners fy BINZEL , FRONIUS, REHM, ROWAC, KEMPPI up to the power 500A TIG/ROZ: inverter and directed transformer sources, for the method TIG – Kemppi with the possibility of the welding
pulse mode MIG/MAG/TIG/ROZ: pulse inverter synergic sources - Fronius Transpulssynergic 4000
Surface adjustmentSeparate cabin with suction Manual colour application, high-pressure device VIZA
Blasting boothBlasting booth dimensions are as following 3200x3200x6000 and blasting device is produced by CLEMCO
Lifting devicesAll the assemblies are equipped by overhead cranes with the load bearing capacity from 3200 to 8000 kgCrane truck with the load bearing capacity 20 000kgHandling manipulative forklifts up to 5000kg
Vibratory processingVibratory device VÚZ-VZ3 is designated for the reduction of residual voltage in welds, forgings and castings. The point of the vibratory processing is in the fact, that there is certain resonance within the specific frequency of vibration .There can occur plastic reshaping of vibrating weld, forging or casting with the forthcoming reallocation and total reduction of resi-dual voltage in the places of voltage concentration. Vibratory processing replaces annealing to the reduction of residual voltage where dimension stability of components is required. The device enables to vibrate on the different preselected frequencies and times of vibration.
Smoothing device Type MATEX Pro 2300
Non - destructive testing Visual method testingRelated directives: STN EN 12062, STN EN 13018,STN EN 25817, STN EN 970, STN EN ISO 5817, STN EN ISO 6520-1Other related directives: STN EN 287, STN EN 15607, STN EN 10042,STN EN 13445
Capillary method testingRelated directives: STN EN 12062, STN EN 1289, STN EN 25817, STN EN 571-1, STN EN 571-2, STN EN ISO 5817, STN EN ISO 6520-1
Magnetic pulverized method testingRelated directives: STN EN 12062, STN EN 1290, STN EN 1291
Measuring material thickness by ultrasonic Related directives: STN EN 12062, STN EN 12223, STN EN 27963, STN 01 5021
••
••
••
•
••
••
•
••
•
•••
•
Machine park