ICP DAS CAN Total solutions · Module Name I-2532 I-2533 I-2533CS series Product Type Extend CAN...
Transcript of ICP DAS CAN Total solutions · Module Name I-2532 I-2533 I-2533CS series Product Type Extend CAN...
CAN bus & RS-485 RS-485 CAN Bus
BusDistance
40 m |
1.2 km1.2 k
|115.2 k
Not support
Popularity
---
40 m |
10 km
Baud Rate5 k |
1 M bps
Multi-Master Multi-Master
Benefit Safety
Feature Arbitration Mechanism
CAN Converter SolutionsCAN Converter, Repeater, Bridge, Switch
Fiber / CAN Converter I-2532 , I-2533 , I-2533CS
Wi-Fi / CAN Converter I-7540D-WF
CAN bus Repeater I-7531
CAN bus Switch I-2534, I-5534-M
CAN bus Bridge I-7532
Serial / CAN ConverterI-7530 , I-7530-FT , I-7530A , I-7530A-MR ,tM-7530
Ethernet / CAN Converter I-7540D , I-7540D-MTCPUSB / CAN Converter I-7565 , I-7565-H1 , I-7565-H2
CAN Converter PerformanceCAN Converter Performance Delay Time or Max. FPS
I-2532 Delay Time = 125 nsI-2533 Delay Time = 120 us
I-7530A-MR 370 FPS
Fiber / CAN Converter
Serial / CAN Converter
tM-7530 420 ~ 520 FPS
I-7565-H1 / H2 3000 FPS
I-7540D-MTCP 2300 FPS
USB / CAN Converter
Ethernet / CAN Converter
Wi-Fi / CAN ConverterCAN bus RepeaterCAN bus BridgeCAN bus Switch
I-2533CS Delay Time = 190 usI-7530 , I-7530A I-7530-FT ,
I-7565
I-7540D
I-7540D-WFI-7531I-7532I-2534
320 ~ 420 FPS
250 FPS
1600 FPS
700 FPSDelay Time = 125 nsDelay Time = 120 usDelay Time = 360 ~ 560 us
Module Name I-2532 I-2533 I-2533CS series
Product Type
Extend CAN bus
Propagation Delay
Fiber Type
Fiber Distance (km)
Converter Bridge Bridge
No Yes Yes
125ns max. 120us max. 190us max.
Multi-Mode (ST) Multi-Mode (ST) Single Mode (SC)
1.4 2 15 / 30 / 60
Isolated CAN bus
Topology
CAN Baud Rate
Yes Yes Yes
One-to-One One-to-One One-to-many
Auto-detect(500K max.)
10k~1Mbps 10k~1Mbps
CAN / Fiber Converter
I-7531 I-7532 I-2534 / I-5534-M
Bridge
5k~1Mbps
120 usYes
2
Yes
Yes
Switch
5k~1Mbps
240 us ~ 1360 usYes
4
Yes
Yes
Product Type Repeater
Baud Rate Auto-detect
Propagation Delay 125 nsExtend CAN bus X
CAN port 2
Integrate two CANnetworks atdifferent baud rate
No
Isolated CAN Yes
CAN Bridge Repeater Solutions
UART / CAN Converter Solutions(1/2)
tM-7530
RS-232 / CAN
CAN 2.0A/2.0B
10k ~ 1M bps< 3.5ms
Yes
Full-Duplex
One-to-OneOne-to-Many
I-7530 / I-7530T I-7530-FT
Product Type RS-232 / CAN RS-232 / CAN
Specification CAN 2.0A/2.0B Fault Tolerance CAN
CAN Baud Rate 10k ~ 1M bps 10k ~ 125k bps
Convert Time < 3.5ms < 3.5ms
Isolated CAN Yes Yes
UART / CAN Conversion Half-Duplex Half-Duplex
Pair ConnectionOne-to-OneOne-to-Many
One-to-OneOne-to-Many
UART / CAN Converter Solutions(2/2) I-7530A
RS-232 / 485 / 422 & CAN
CAN 2.0A/2.0B
10k ~ 1M bps< 3.5ms
Yes
Modbus RTU No RTU Slave
Full-Duplex
One-to-OneOne-to-Many
I-7530A-MR
Product Type RS-232 / 485 / 422 & CAN
Specification CAN 2.0A/2.0B
CAN Baud Rate 10k ~ 1M bps
Convert Time < 3.5ms
Isolated CAN Yes
UART / CAN Conversion Full-Duplex
Pair ConnectionOne-to-OneOne-to-Many
• RS-232 to CAN Converter ( I-7530 )
Pair Connection (Transparent Communication)
CAN Converter Solutions
• RS-232 to CAN Fault Tolerant Converter ( I-7530-FT )
Pair Connection (Transparent Communication)
CAN Converter Solutions
CAN Converter Solutions
• Modbus RTU to CAN Converter ( I-7530A-MR )
I-7530A-MR
Modbus RTUSlave Inside!!
USB / CAN Converter Solutions I-7565
USB to CAN
1
279 ~ 360 FPS10k ~ 1M bps and
user-definedYes
Send CAN with hardware timer No Yes (resolution = 0.1ms)
No
Windows 2K/XP/Vista/7 (32 & 64 bit)/8.x, and Linux
I-7565-H1 / I-7565-H2
Product Type USB to CAN
CAN Channel 1 / 2
Max. CAN FPS. 3000 FPS
CAN Baud Rate.5k ~ 1M bps and
user-defined
Isolated CAN Yes
Show Error Frame Yes
USB Driver
Ethernet / CAN Converter Solutions(2/2) I-7540D I-7540D-MTCP
Ethernet to CAN Ethernet to CAN
1
2118 ~ 2241 FPS10k ~ 1M bps and
user-definedYes
Modbus TCP
Server24
Acts as ModbusRTU slave
1
1852 ~ 2244 FPS10k ~ 1M bps and
user-definedYes
LAN Protocol TCP / UDP Socket
TCP Socket (Client / Server)
Infrastructure & Ad-hoc mode
25Support Virtual COM
I-7540D-WF
Product Type Wi-Fi to CAN
CAN Channel 1
Max. CAN FPS. 700 FPS
CAN Baud Rate.5k ~ 1M bps and
user-defined
Isolated CAN Yes
Socket clients 3
Others
CAN bus uPAC SolutionsCAN bus PAC Products
Palm size CAN PAC with UART and DI/DO
I-7188XBD-CAN
Palm size CAN PACWith Ethernet / microSD / UART
uPAC-5001D-CAN1uPAC-5001D-CAN2
Palm size CAN PAC with Ethernet / UART and DI/DO
uPAC-7186EXD-CAN
CAN PAC Module for XPAC / WinPAC / ViewPAC
I-87120 , I-8120W
CAN bus uPAC Solutions
• Palm size CAN PAC ( I-7188XBD-CAN )Feature :• 80186, 40MHz CPU. • 512K bytes SRAM. • 512K bytes Flash.• 2K byte EEPROM.• Support C/C++ programming language.• Built-in ICP DAS’s MiniOS 7.• Built-in an unique Hardware Serial No.• Built-in CAN / UART / DO / DI channels.• 7-segment LED display.• 2500 Vrms isolation on the CAN side.• 3 kV galvanic isolation among power
supply.
CAN bus uPAC Solutions
• Palm size CAN PAC with Ethernet ( uPAC-7186EXD-CAN )Feature :• 80186, 80MHz CPU. • 512K bytes SRAM. • 512K bytes Flash.• 2K byte EEPROM.• Support C/C++ programming language.• Built-in ICP DAS’s MiniOS 7.• Built-in an unique Hardware Serial No.• Built-in CAN / UART / DO / DI channels.• 10/100 BASE-T Ethernet Controller.• 2500 Vrms isolation on the CAN side.• 3 kV galvanic isolation among power
supply.
CAN bus uPAC Solutions
• CAN PAC with various storage media ( uPAC-5001D-CAN )Feature :• 80186, 80MHz CPU. • 512K bytes SRAM. • 512K bytes Flash.• 16K byte EEPROM.• Support 2GB microSD.• Support C/C++ programming language.• Built-in ICP DAS’s MiniOS 7.• Built-in an unique Hardware Serial No.• Built-in CAN / UART / Ethernet channels.• 2500 Vrms isolation on the CAN side.• 3 kV galvanic isolation among power
supply.
CAN bus uPAC Solutions
• CAN PAC Module ( I-87120 )Feature :• I-87K serial port communication mechanism.• 80186, 80MHz CPU. • 512K bytes SRAM. • 512K bytes Flash.• 2K byte EEPROM.• Firmware support C/C++ language.• Built-in ICP DAS’s MiniOS 7.• Support XPAC / WinPAC / ViewPAC
controller.• 2500 Vrms isolation on the CAN side.• 3 kV galvanic isolation among power supply.
CAN bus uPAC Solutions
• CAN PAC Module ( I-8120W )Feature :• I-8K parallel port communication mechanism.• 80186, 80MHz CPU. • 512K bytes SRAM. • 512K bytes Flash.• 2K byte EEPROM.• Firmware support C/C++ language.• Built-in ICP DAS’s MiniOS 7.• Support XPAC / WinPAC / ViewPAC controller.• 2500 Vrms isolation on the CAN side.• 3 kV galvanic isolation among power supply.
CAN bus PC Board Solutions
※All PC boards have the same CAN bus performance with 7500 FPS.
CAN bus PC Board Products
PISO-CAN 100U 1-port CAN bus Universal PCI Board
PISO-CAN 800U 8-port CAN bus Universal PCI Board
PCM-CAN 200P 2-port CAN bus PC-104+ Board
PISO-CAN 200U 2-port CAN bus Universal PCI Board
PISO-CAN 400U 4-port CAN bus Universal PCI Board
PCM-CAN 200 2-port CAN bus PCI-104 Board
PISO-CM 100U 1-port CAN Universal PCI Board with CPU inside
PCM-CAN 100 1-port CAN bus PCI-104 Board
PEX-CAN 200i 2-port CAN bus PCI-Express Board
PCM-CM100-D 1-port CAN bus PCI-104 Board with CPU inside
CAN bus PC Board Solutions• 1 / 2 / 4 / 8 CAN Ports Universal PCI Board Feature :• Universal PCI interface.• Compatible witch CAN 2.0A and 2.0B. • Baud rate : 10k ~ 1M bps and user-
defined.• Support CAN filter configuration.• Provide software utility and Demos.• Support LabVIEW and DASYLab drivers.• Support CAN OPC server.• 2500 Vrms isolation on the CAN side.• 3 kV galvanic isolation among power
supply.
PISO-CAN 200U
PISO-CAN 400U
PISO-CAN 100U
PISO-CAN 800U
CAN bus PC Board Solutions
• Built-in CPU Universal PCI Board ( PISO-CM100U )Feature :• Universal PCI interface.• Compatible witch CAN 2.0A and 2.0B. • Follow ISO-11898-2 standard. • Baud rate : 10k ~ 1M bps and user-defined.• Support user-defined firmware.• Built-in 80186, 80MHz CPU.• Provide software utility and Demos.• Support LabVIEW and DASYLab drivers.• 2500 Vrms isolation on the CAN side.• 3 kV galvanic isolation among power
supply.
CAN bus PC Board Solutions
• 2-port CAN PCI-Express Board ( PEX-CAN 200i )
Feature :• PCI-Express interface.• Compatible witch CAN 2.0A and 2.0B. • Follow ISO-11898-2 standard. • Baud rate : 10k ~ 1M bps and user-defined.• Support CAN filter configuration.• Provide software utility and Demos.• Support LabVIEW and DASYLab drivers.• Support CAN OPC server.• 2500 Vrms isolation on the CAN side.• 3 kV galvanic isolation among power
supply.
CAN bus PC Board Solutions• 1-port CAN PCI-104 Board ( PCM-CAN 100 )• 2-port CAN PCI-104 Board ( PCM-CAN 200 )Feature :• PCI-104 interface.• Compatible witch CAN 2.0A and 2.0B. • Follow ISO-11898-2 standard. • Baud rate : 10k ~ 1M bps and user-defined.• Support LabVIEW and DASYLab drivers.• Provide software utility and Demos.• Support CAN OPC server.• 2500 Vrms isolation on the CAN side.• 3 kV galvanic isolation among power
supply.
PCM-CAN 100
PCM-CAN 200
CAN bus PC Board Solutions• 2-port CAN PC-104+ Board ( PCM-CAN 200P )Feature :• PC-104+ interface.• Compatible witch CAN 2.0A and 2.0B. • Follow ISO-11898-2 standard. • Baud rate : 10k ~ 1M bps and user-define.• Support LabVIEW and DASYLab drivers.• Provide software utility and Demos.• Support CAN OPC server.• 2500 Vrms isolation on the CAN side.• 3 kV galvanic isolation among power
supply.
CAN bus PC Board Solutions
• Built-in CPU PCI-104 Board ( PCM-CM100-D )Feature :• PCI-104 interface.• Compatible witch CAN 2.0A and 2.0B. • Follow ISO-11898-2 standard. • Baud rate : 10k ~ 1M bps and user-defined.• Support user-defined firmware.• Built-in 80186, 80MHz CPU.• Provide software utility and Demos.• Support LabVIEW and DASYLab drivers.• 2500 Vrms isolation on the CAN side.• 3 kV galvanic isolation among power
supply.
Other CAN ProductsDescription Product Name
3-Phase Smart Power Meter PM-3133-CPS
CAN bus Connector CNT-CAN
2 Loops single-phase Smart Power Meter PM-3112-CPS4 Loops single-phase Smart Power Meter PM-3114-CPS
7/14 channels Surge Protector SG-770
9-pin Female D-sub & 3-wire CAN bus cable CA-0910-C
CAN bus Power Meter• 2 Loops single-phase Smart Power Meter( PM-3112-CPS )• 4 Loop single-phase Smart Power Meter( PM-3114-CPS )Feature :
True RMS Power MeasurementsEnergy Analysis for 1P2W, 1P4WCurrent Measurements Up to 200 A with Different CT RatioVoltage Measurements Up to 300 VClip-on CT for Easy InstallationW Accuracy Better than 1% (PF=1)Supports RS-485, Ethernet or CAN bus InterfaceSupports Modbus RTU, Modbus TCP or CANopen ProtocolSupports 2 Power Relay Output (Form A)
CAN bus Power Meter• 2 Loops single-phase Smart Power Meter( PM-3112-CPS )• 4 Loop single-phase Smart Power Meter( PM-3114-CPS )Feature :
True RMS Power MeasurementsEnergy Analysis for 3P4W, 3P3W, 1P3W, 1P2WCurrent Measurements Up to 200 A with Different CT RatioVoltage Measurements Up to 300 VClip-on CT for Easy InstallationW Accuracy Better than 1% (PF=1)Supports RS-485, Ethernet or CAN bus InterfaceSupports Modbus RTU, Modbus TCP or CANopen ProtocolSupports 2 Power Relay Output (Form A)
CAN Bus Surge Protector• 7 / 14 channels Surge ProtectorFeature :• Follow the IEC 61000-4-5 and IEC 61000-4-
12 • 7 differential or 14 single-ended input
channels.• Input Signal Type : Voltage, Current,
Thermocouple, RTD, RS-485/422, RS-232, CAN bus, FRnet
• 6 kV Surge Protection
CAN Bus Connector• CNT-CANFeature :• Built-in switch to select 120Ω terminal resistor.• 2 cable entries.• Available with programming interface.• 90° cable outlet• Baud rate10kbps ~ 1Mbps
High protection and Certification
•DC/DC power supply to galvanically isolated bus drivers •Photo-isolation protection on bus•4KV ESD protection•CE, FCC certification
The Advantage in ICP DAS
• All kinds of CAN total Solutions• DeviceNet/CANopen protocol series• CAN ODM products• Good technology support Team
Industrial Computer Product Data Acquisition System
More Information in theCAN bus Website
http://www.icpdas.com/root/product/solutions/industrial_communication/fieldbus/products_catalog.html