ICIATE 2018 CONFERENCE SOUVENIR ISBN: 978-93-5311-039-0 · 2018-08-02 · The success of this...

INTERNATIONAL CONFERENCE ON INNOVATIVE AND

ADVANCED TECHNOLOGIES IN ENGINEERING

(ICIATE 2018)

DATE: 21ST to 23rd MARCH, 2018

VENUE: ATHARVA COLLEGE OF ENGINEERING

ICIATE 2018

CONFERENCE SOUVENIR

ISBN: 978-93-5311-039-0

ORGANIZED BY

AET’s

ATHARVA COLLEGE OF ENGINEERING

MUMBAI

Atharva Educational Complex, Malad Marve Road, Charkop Naka, Malad (West), Mumbai-95

Tel.: 91-022-40294949 (30 Lines)

www.aceiciate.in www.atharvacoe.ac.in

http://www.atharvacoe.ac.in/

This is proceeding of a conference entitled “International Conference on Innovative and Advanced

Technologies in Engineering ICIATE-2018, which was sponsored by Atharva College of Engineering,

Malad, Mumbai and held on 21st to 23

rd of March 2018.

Chief Editor

Dr. P.N. Nemade

Dr. S.P. Kallukar

Editor

Prof. Neelima Pathak

Prof. Sachin Gavhane

Joint Editor

Prof. Amruta Pokhare

Prof. Kunal Shrivas

Prof. Sarang Kulkarni

Prof. Amruta Pavte

Prof. Neha Bansal

Prof. Payal Varangaonkar

Advisory Board

Prof. Mahendra Patil

Prof. Pragya Jain

Prof. Jyoti Kolap

Prof. Disha Bhosale

Prof. Poonam Deshpande

Dr. Bhushan Sonawane

Editorial Board

Prof. Karuna Nikum

Prof. Deepthi Sekhar

Copyright © ICIATE 2018 – International Conference on Innovative and Advanced Technologies in

Engineering

ISBN:

Enquiries to

The Editor

ICIATE-2018 Conference Proceeding

Atharva College of Engineering,

Malad Marve Road, Charkop Naka,

Malad (W), Mumbai, 400095, India

Tel.No. (022) 40294949

Fax: +912240294911

Email ID: [email protected]

Conference website: www.aceiciate.in

Website: www.atharvacoe.ac.in

Instruction to authors:

For a paper to be considered for publication it is a pre condition that it is not submitted for publication elsewhere,

contains results that are new significant and of interest to a wide section of engineering and science community.

Editors may invite papers on special topics of current interest.

Patron

Hon. Shri Sunil Rane

Executive President

Conference Advisors

Dr. P. N. Nemade Dr. S. P. Kallurkar

Director Principal

Organising Secretary

Prof. Karuna Nikum Prof. Neha Kunte

Prof. Kavita Bani Prof. Niranjan Samudre

Central Organising Committee

Prof. Mahendra Patil Prof. Neelima Pathak

Prof. Jyoti Kolap Prof. Pragya Jain

Prof. Disha Bhosle Prof. Poonam Deshpande

Dr. Bhushan Sonawane

Core Organising Committee

Prof. Smita Patil Prof. Snigdha Bangal Dr. Mamta Meena

Prof. Sangeeta Kotecha Prof. Chandana Nighut Prof. Kishor Bhosale

Prof. Rashmi Chaugale Prof. Ashmita Shetty Prof. Priti Rumao

Prof. Supriya Awasthi Prof. Priti Singh Prof. Ditixa Vyas Prof. Deepthi Shekhar

Advisory Committee

Dr. Abhay Wagh Dr. Venkata Yaramasu Dr. Rakesh Saxena

Director, MSBTE Northern Arizona University Director, SGSITS

Govt. of Maharashtra, India USA MP, India

Dr. Jonathan Joshi Mr. Paul C. Mathew Mr. Sunil Issac

CEO, Eduvance SEA, Nationwide Building Society Vice President & KAM

India Didcot, UK Erricson, Malaysia

Prof. Mathew T Mathew Dr. Vijay Mandke Dr. Ashish Mathur

Associate Professor,USM Ex. Deputy Director BITs Pillani IIT BHU,

Chicago, US Professor at NIIT University Varanasi, India

Dr. Aditya Abhyankar Dr. S.G. Bhirud Dr. Ameya Tripathi

Dean, Faculty of Technology Professor, Dept. of Computer Engg Dean, R&D

University of Pune, India VJTI, Mumbai, India D.B.I.T., Mumbai, India

Mr. Sachin Sadare Mr. David C. Mathew Mr. Manoj O. Jacob

Founder & Director Director, Sales. Lead Mechanical Engineer

Idea Nutz Consulting, Mumbai Wipro, Australia Melbourne, Australia

“Any sufficiently advanced technology is equivalent to magic”

Message from Executive President

Atharva Group of Institutes

Mr. Sunil Rane

PATRON

It gives me immense pleasure that Atharva College of Engineering is organizing an

International Conference on innovative and Advanced Technologies in

Engineering (ICIATE-2018) during March 21st to 23

rd at Atharva College of

Engineering, Malad, Mumbai.

The central theme of the conference is “Virtual Reality”. ICIATE provides an

opportunity for meeting of International Researchers, Engineers, Scientists and

specialists in the various research and development fields of Engineering and

Technology. The conference offers a premise for global experts to gather and interact

intensively on the topics of Electrical and Electronics, Electronics and

Communication, Computer Science and Information Technology.

I hope eminent speakers will cover the theme virtual reality from different

perspectives. I am privileged to say that this conference will definitely offer suitable

solutions to the global issues.

The success of this Conference is solely on the dedication and efforts of innumerable

people who started working on the preparations for almost a year in many ways to

make this Conference become a reality. Eventually I express my special thanks and

appreciation to all. I wish ICIATE 2018 all the best for its success.

Mr. Sunil Rane

Executive President

Atharva Group of Institutes

Malad, Mumbai

“Research, Technology & Innovation”

From Director’s Desk

Dr. P. N. Nemade

Conference Advisor

I am pleased to welcome you all for the International Conference on Innovative

and Advanced Technologies in Engineering being organized during 21st to 23

rd

March, 2018 by Atharva College of Engineering, Malad, Mumbai.

Atharva Campus is a camouflage wealth of knowledge, innovation and technology

that lies within. Atharva in itself is a niche of opportunities to all aspiring engineers

and researchers. The events in the conference are targeted towards researchers,

practitioners, professionals, educators and students to share their experience,

innovative ideas, issues, recent trends and future directions in field of Engineering

and Science and Technology.

This conference is a unique forum for exchange of innovative ideas, technical

expertise for technological advancements etc. in this evergreen field. It includes

keynote address from Academicians and paper presentation by research scholars. It is

a matter of joy for us to welcome the participants to this conference.

In a nutshell, the conference promises to transcend to a new and unprecedented level

of excellence. It is thus the zenith where technology and skill meets opportunities and

guidance. It is a milestone that one would not dare to miss. I wish ICIATE 2018 a

grand success.

Dr. P. N. Nemade

Director

Atharva College of Engineering

Malad, Mumbai

“Excellence through Education”

From Principal’s Desk

Dr. S. P. Kallurkar

Conference Advisor

It gives me immense pleasure to be a part of this hosting team of “2nd

International

Conference on Innovative and Advanced technologies in Engineering 2018”. The

conference intends to bring together scientists, engineers and practitioners from

different disciplines to discuss concerns related to various computation techniques in

science and technology.

I take this opportunity to welcome all the delegates of the conference. On behalf of

whole ICIATE 2018 team, I would like to thank all the authors, sponsors and

keynote speakers for their support and co-operation. The rapid development in

technologies and changes in lifestyle impose various issues in many countries. The

conference ICIATE 2018 has been crafted to challenge the hurdles and we are

fortunate to have leading speakers to share their experience and perspectives to

achieve smart solutions through their innovation.

I hope that the conference serves as a locus for interdisciplinary, a space for discourse

and collaboration. I would like to express my appreciation to the organizing

committee for their dedicated efforts to materialize the conference. I hope all the

participants will have a fruitful and beneficial experience.

Finally, I congratulate HOD, college faculty, student representatives and participant

for their efforts in organizing and participating in this conference and wish the

conference all the success.

Dr. S. P. Kallurkar

Principal


Malad, Mumbai

Messages from

International

Advisory

Committee

Dr. Venkata Yaramasu

It gives me an immense pleasure to be a part of the 2nd

International Conference on

Innovative and Advanced Technologies in Engineering (ICIATE-2018). I strongly

believe that this conference will provide tools and knowledge to overcome significant

problems appearing in our industry and society by identifying innovative ideas and

technologies introduced by the researchers and students.

The success of this conference will encourage us in introducing many more initiatives

for innovative trends in the coming years. I wish the ICIATE-2018 a great success.

Dr. Venkata Yaramasu

PhD

Northern Arizona University

USA

Dr. Rakesh Saxena

I am pleased to know that Atharva College of Engineering is organizing “International

Conference on Innovative and Advanced Technologies in Engineering 2018

(ICIATE18)”. The institution is creating a platform for the industrialist, professionals,

researcher and students to share and express their views on Innovative and Advanced

Technologies in Engineering. It is absolutely essential to nurture the innovative

capabilities of students as they are the future of our country and in that context it is very

relevant that Atharva College of engineering, Mumbai has organized this conference.

Dr. Rakesh Saxena

Director

SGSITS, Madhya Pradesh

India

Dr. Amiya Tripathy

It gives me pleasure to know that Atharva College of Engineering Mumbai is organising

International Conference on “Innovative and Advanced Technology in Engineering”.

I am sure that the interaction of participants throughout the globe, internationally

renowned counterparts will go a long way in knowledge sharing to help Industry,

Society to grow and to compete globally.

This conference will be a grand success and extend my best wishes for the success of

this conference. I congratulate the Institute on preceding this wonderful step.

Dr. Amiya Kumar Tripathy

Dean (R&D), DBIT, Mumbai, India

Adj. Professor, ECU, Perth, Australia

Mr. Paul C. Mathew

The conference titled International conference on Innovative and Advanced

Technologies in Engineering provides a platform for discussions on various technical

topics related to engineering as well as science and technology. This is a conference of

international significance. The proceedings represent scholarly work of advanced and

innovative thinkers and educators from around the world. It is felt that it is only

through the exchange of information that one can hope to keep up with the rapidly

changing world around us. I wish all the delegates, a great educational and informative

experience at the conference. My best wishes to the organizers of the conference.

Mr. Paul C. Mathew

Director

Senior Enterprise Architect

Nationwide Building Society

Didcot, UK

Mr. Sachin Sadare

The conference is an international platform for sharing new perspectives in the areas of

science and technology with transforming context. Many educators share their

experiences, practices, and perspectives to accelerate educational changes in the

environment of today’s world that is always in a state of flux. The papers, discussions,

and interactions during the conference will bring forth multiple viewpoints and address

issues of critical importance. My best wishes to all participants of the conference to

make the most out of this event by learning innovative and advanced technologies.

Mr. Sachin Sadare

Founder & Director

Digital Dojo Pvt. Ltd.

www.digitaldojo.in

http://www.digitaldojo.in/

Dr. S. G. Bhirud

I am glad to be the part of the 2nd International Conference on Innovative Technology

in Engineering -2018. The events in the conference are targeted towards researchers,

practitioners, professionals, educators and students to share their experience, innovative

ideas, issues, recent trends and future directions in field of Engineering and Science and

Technology.. Finally, I congratulate the team members and participant for their efforts

in organizing and participating in this conference and wish the conference all the

success.

Dr. S. G Bhirud

Professor

Computer Department

VJTI, Mumbai

Dr. Ashish Mathur

The technology used in various fields of engineering is advancing at a tremendous pace

every passing day. There has been a boom in the usage of internet and the demand for

high speed access to video and data is ever increasing. 10 years before, 3G and 4G were

a distant dream, but today a lot of research is going in the field of 5G as well.

In such a scenario, organizing such a conference is of paramount importance. This will

enable researchers from different domains to share their views on a common platform.

Particularly, I would like to congratulate Atharva College of Engineering (ACE),

Mumbai for taking such a promising initiative. This will not only help the students by

opening the vistas of opportunities in various fields of engineering, but also promote

learning and sharing of ideas for the faculty members. I am confident that this

conference will indeed generate a lot of interest among the students to explore and

pursue the area of research, thereby bringing laurels to your institute and developing our

society as a whole.

Dr. Aashish Mathur

Assistant Professor

Dept of Electrical Engineering

IIT Jodhpur

Messages

From

Editorial Board

Prof. Nileema Pathak

The efforts taken by Shri Sunil Rane, Executive President-AGI; in the field of Science

and technology has encouraged today’s youth to think innovatively. On behalf of

organizing team of ICIATE 2018, I would like to wish all authors, patrons, and readers

a very Happy, Harmonious, and Prosperous Year 2018! Conferences have a strong zest

to bring researchers together to discuss and enhance their knowledge in the respective

domain. ICIATE is not just a conference but a great meetup for all the technocrats. Such

meetups always help us to collaborate with the people of interest.

It gives me immense pleasure to write as an editor of this 2nd

International conference

on “Innovative and Advanced Technologies” at Atharva College of Engineering ,

Mumbai.

March 2018 ,turned out to be vibrant and zealous because of ICIATE. I am stunned and

amazed by this flamboyant aura of technology and happy to see the efforts taken by the

current generation and of course the diversity was something that left me awestruck. I

appreciate the efforts taken by all the researchers and wish them best of luck for their

future success.


Editor – ICIATE 2018

H.O.D.

Department of Information Technology



With the zest to support digital India and to boost Research and Development at

international platform, Atharva college of engineering has organized an 2nd

International Conference on “Innovative and Advanced Technologies”, from 21st to

23rd March 2018. It gives me immense pleasure in writing this message as an Editor of

this conference.

The theme of the conference is “Virtual Reality”. The proceedings of ICIATE include

abstracts for oral presentations provided by enthusiastic students, practicing researchers,

industry personalities and academicians. I extend my warmest thanks to the authors for

their interest, enthusiasm and timely submission of research papers and participation in

this mega event of more than 400 delegates.

ICIATE was a great platform for all the technocrats. The idea behind this conference

was to help and motivate researchers to carry forward their work to the next level. As

Editor of ICIATE 2018, I anticipate that these proceedings would be of immense value

and will be definitely useful to researchers in their practice or thinking process. This

collection will also offer a window for new perspectives and directions in the respective

horizons.

Happy Tech 2018!!!


Editor

Assistant Professor

Department of Information Technology

Messages

From

Organizers

Prof. Karuna Nikum

It is my great pleasure to announce that the2nd

International Conference on

Innovative and Advanced Technologies in Engineering (ICIATE 2018) which

took place at Atharva College of Engineering, Malad (West), Maharashtra, India

on 21st - 23rd March, 2018 was a grant success. It has been a real honour and

privilege to serve as the Organising Secretary of the conference.

This year, the program spanned three days which included one day of Pre

conference workshop followed by two days of the conference. There were three

very informative Keynote presentations and a Panel Discussion which was an

excellent platform for discussions, debate and exchange of ideas on current

topics like virtual reality, IOT etc.

We thank our HonourableShri. Sunil Rane sir for his vision and leadership. The

conference would not have been possible without the enthusiasm and hard work

of my colleagues. We are also grateful to all the authors for their valuable

contributions.

Karuna Nikum

Assistant Professor

Atharva College of Engineering, Mumbai

Prof. Neha Kunte

ICIATE 2018 was fortunate to attract a high interest among the community, and

the conference received 250 submissions from6 different tracks. The huge number

of submissions provided an excellent opportunity for a high-quality program, but

also called for a demanding and laborious paper evaluation process.

The Review Committee worked efficiently and responsibly under tight time

constraints to produce at least two reviews for each paper that provided the basis

for the final paper selection.

We had an exciting week of insightful presentations, discussions, and sharing of

technical ideas with colleagues from around the world. We thank you for

attending the conference.

Neha Kunte

Assistant Professor


Prof. Deepthi Shekhar

ICIATE 2018 provided international forums for Scientists and Engineers from

academia and industry to exchange and share their experiences, research results,

and new ideas emerging topics in engineering field.

This year we made a concerted effort to raise the standard of the International

Conference. In order to give more time for reviewers to perform thorough reviews

and more time for authors to respond to the reviewer suggestions and improve

their papers, we moved the submission deadline forward by one month. We

promoted the conference heavily through frequent mails and posters out to

departments all over the world.

The final result would not have been possible without the dedication and hard

work of the my colleagues. Special thanks are due to the track chairs, workshop

chairs, the members of the Technical Program Committees, the General Chair,

and to all the reviewers for the quality and depth of the reviews, and their sense of

responsibility and responsiveness.

Deepthi Sekhar

Assistant Professor


Atharva College of Engineering www.aceiciate.in

“INTERNATIONAL CONFERENCE ON

INNOVATIVE AND ADVANCED

TECHNOLOGIES IN ENGINEERING”

(ICIATE 2018)

DATE: 21st To 23

rd MARCH, 2018

Organized By

AET’s


Venue:

Atharva Educational Complex,

Malad Marve Road,

Charkop Naka,

Malad (West), Mumbai-95

Tel.: 91-022-40294949 (30 Lines)

www.atharvacoe.ac.in


INTERNATIONAL CONFERENCE ON INNOVATIVE AND ADVANCED

TECHNOLOGIES IN ENGINEERING

(ICIATE 2018)

Theme Paper

Innovation and proliferation of advance technologies in Engineering is the order of

the day with rapid increase in demand for real time solutions with cutting-edge

technologies. The International conference at Atharva College of Engineering aims to

spark discussion on the recent trends, practical issues and the solutions adopted in the

field of Engineering and Technology by incorporating innovative ideas and

employing advanced technologies. Emphasis is laid on the recent developments in the

field of Electronics, Telecommunication, Electrical, Information Technology and

Computer Engineering covering various aspects.

In the field of applied computing and Computer Engineering, the focus will be on

IOT and Nano sensors, Big Data, Analytics, Cloud Computing, Artificial intelligence

and robotics, Human-computer interaction, Formal semantics, Computer and System

Security, Knowledge Acquisition and Expert systems, Algorithmic information

theory, Design Automation, Smart materials and Intelligent systems, Speech

synthesis, Usability engineering, Android Technology, Data mining and Algorithm

Analysis.

The theme of this workshop is Virtual Reality and organized with the objective of

bringing together academicians, scientists and experts, working in this area of

research. This workshop focuses on both theory and applications in the broad areas of

Virtual Reality in Electrical, Electronics, Electronics and Communication, Computer

Science and Information Technology. Virtual Reality is the computer-generated

simulation of a three-dimensional image or environment that can be interacted with in

a seemingly real or physical way by a person using special electronic equipment, such

as a head mounted display (HMD) with a screen inside or gloves fitted with sensors.

Virtual reality is the paradigm empowered by the advancement of a number of

distinctive technologies, including image processing, the internet, wireless

communication technologies, cloud computing, sensors, big data analytics and

machine learning algorithms. Smart Cities, Smart Grids, Smart Agriculture are no

more hypothetical. Big Data Analytics is another field which was once just all about

gathered information, run analytics and unearthed information that could help with

future decisions. The scenario is no more so, as it has grown to identify insights for

immediate decisions and enable faster and better decision making. As the

advancements in these fields are growing leaps and bounds performance and security

has also become a matter of concern. Cyber crime and data compromises are growing

rapidly as ICT are employed on a large scale for doing important tasks and data stored


in cloud is also increasing. Thus the gravity of developing internet - secure

environment is on high demand.

In electrical domain our conference mainly focuses on the areas of Power Electronics,

drives technology and Power system. Power Electronics is the integral part of drives

technology and power system. It is an application oriented and interdisciplinary area

which plays a crucial role of conversion and control electrical power. Smart grid

technology deals with a variety of operational and energy measures including smart

meters, smart appliances, renewable energy resources, and energy efficiency

resources.

Global communication systems have not only changed the world but are also

advancing at an exceptional rate. We thus encourage researchers to gain insight into

communication systems of the future, and to develop such systems. In ICIATE 2018,

we are exploring newer ideas and evolving technologies such as 5G mobile

communications, machine communications, fiber optical links and networks, and

sensor network communication, with emerging new applications by publishing

papers containing pure knowledge.

ICIATE’18 provides the forum for researchers, practitioners to present their

innovations, technological advances and provides a platform for academicians,

researchers, engineers and industrialists from various disciplines to deliberate the

latest trends, sustainability, practical challenges encountered and the solutions

implemented.




(ICIATE 2018)

DATE: 21st to 23

rd March, 2018

Schedule: Pre-Conference Workshops

Day 1: 21/03/2018

Time Session Venue

08:30AM

onwards Registration for Workshop

Phase I -Ground

Floor 02:00PM

To 05:00PM Registration for Conference(Paper/poster)

Workshop on

Internet of things and Virtual Reality

(For Students only)

Workshop on

Teaching Learning through Social

Networking

(For Professional only)

Venue:

(Lab 10, 1st Floor)

Speakers 1:

Topic: Internet of things

Mr. Rajkumar Singh

(R&D Engineer. Scientech Technologies Pvt. Ltd)

Time: (10:00 AM to 12:00PM)

Speakers: 2

Topic: Virtual reality

Mr. Raj Dedania

(Design & Code: Atharva Chapter)

Time: (12:00 AM to 01:00PM)

Speakers: 3

Mr. Krunal Gediya


Time: (02:00 PM to 03:00PM)

Speaker: 4

Mr. Mrityunjai Mishra


Time: (3:00PM to 4:00PM)

Venue

(CC lab, 5th

Floor)

Speakers 1:

Dr. Deepak Waikar (Managing Partner, EduEnergy Consultant, Singapore)

Topic: Smart Education: Challenges &

Opportunities

Time: (10:00 AM to 11:00AM)

Speakers 2:

Prof. Mahendra Patil

(HOD CMPN Deptt.)

Topic: Teaching Learning through Course

Networking

Time: (11:00 AM to 01:00PM)

Speakers: 3

Dr. Deepak Waikar

Topic: Blended Learning: Challenges &

Opportunities

Time: (02:00 PM to 03:00PM)

Speakers: 4

Prof. Poonam Deshpande

(HOD Humenity and Science)

Topic: New Methodology in Teaching

Time: (3:00PM to 5:00PM)

Workshop Team Members

Prof. Amruta Mhatre Prof. Divya V Kumawat

Prof Ajeet Ghodeswar




(ICIATE 2018)

DATE: 21st to 23

rd March, 2018

Schedule

Paper / Poster Presentation

Day 2: 22/03/2018

Day 2: 22/03/2018

Time Schedule Venue

08:30AM onwards Registration for Conference(Paper/poster) Phase I, Ground Floor

08:30AM-9:30AM Breakfast Phase III, Ground Floor

INAUGURATION

09:30AM-9:35AM Lighting of Lamp

Phase III

2nd Floor,

Auditorium

Phase III. Ground Floor

9:35AM-9:40AM Welcome Address

Prof. Karuna Nikum

9:40AM-9:45AM

Opening Remarks By:

Dr. S. P. Kallurkar

Principal, ACE

Dr. P. N. Nemade

Director, ACE

9:45AM-9:50AM Address by Guest of Honor

Dr.S.G Bhirud Professor Computer Engineering Department, VJTI, Mumbai.

9:50AM-9:55AM Address by Guest of Honor

Shri Shailendra Singh Assistant Director, MSME-Development Institute, Mumbai

09:55AM-10:05AM

Address by Chief Guest

Hon. Dr. Avinash S. Pant Former Vice Chairman, AICTE &

Principal, Govt. college of Engg. & Research, Pune

10:05AM-10:20AM Address by Conference Chair

Dr. Deepak Waikar Managing Partner,EduEnergy Consultant, Singapore

10:20AM-10:25AM Address by Executive President

Hon. Shri. Sunil Rane Executive President, Atharva Group of Institutes

10:25AM-10:30AM Vote of Thanks

Prof. Deepthi Shekhar 10:30AM-11:00AM Tea Break

11:00AM-12:00AM

Key Note Address

Shri Shailendra Singh Assistant Director, MSME-Development Institute, Mumbai

12:00PM- 1:00PM Key Note Address

Dr. Aditya Abhyankar, Dean- Faculty of Technology, Department of Technology, Pune University

01:00PM-02:00PM Lunch

Phase III, Ground Floor

02:00PM-02:05PM Inauguration of Poster Presentation

Dr. Deepak Waikar

Managing Partner,EduEnergy Consultant, Singapore

Phase I

02:00PM-03:30PM Parallel session of Paper/Poster Presentation Phase I

03:30PM-03:40PM Tea Break

Phase I

03:40PM-05:00PM Parallel session of Paper/Poster Presentation

Phase I


INTERNATIONAL CONFERENCE ON “INNOVATIVE AND

ADVANCED TECHNOLOGIES IN ENGINEERING”

(ICIATE 2018)

DATE: 21st to 23

rd March, 2018

Schedule

Paper / Poster Presentation

Day 3: 23/03/2018

Time Schedule Venue

08:30AM onwards Registration for Conference(Paper/poster) Phase I

Ground Floor

09:00AM-09:30AM Breakfast Phase III

Ground Floor

09:30AM-11:30AM Parallel session of Paper/Poster Presentation

Phase I 11:30AM-11:40AM Tea Break

11:40AM-01:30PM Parallel Paper/Poster Presentation

01:30PM-02:30PM Lunch Phase III

Ground Floor

02:30PM -03:30PM

Panel Discussion on Future Of Virtual Reality

Phase III

4th Floor,

Seminar Hall

Dr. Y. S. Rao

Vice Principal, Professor & HOD,

EXTC, SPIT

Dr. Deven Shah

Professor & Mentor Dean (H &

S), IT Dept., TCET


HoD, INFT, ACE

Dr. Jonathan Joshi

Founder & CEO, Eduvance,

Mumbai

Dr. Lochan Jolly

Professor and Dean (Students and

Staff Welfare), EXTC, TCET

Dr. Meena Kumari

Chief Technology Officer, iCRM

03:30PM-03:40PM Tea Break Phase III

Ground Floor

VALEDICTORY

03:40PM-03:50PM Welcome Address

Dr. S. P. Kallurkar

Principal, ACE

Phase III

4th Floor,

Seminar Hall

03:50PM-04:00PM Report of Rapporteur


04:00PM-04:10PM Views of Participants

04:15PM-04:20PM

Address by Chief Guest

Dr. Meena Kumari

Chief Technology Officer,

Institute for Customer Relationship Management

04:20PM-04:35PM Address by Conference Chairperson

Dr. Deepak Waikar

Managing Partner,EduEnergy Consultant,Singapore

04:35PM-04:45PM

Address by Executive President

Hon. Shri. Sunil Rane

Executive President, Atharva Group of Institutes

04:45PM-04:55PM Distribution of Prizes for Paper & Poster Presentation

04:55PM-05:00PM Vote of Thanks

Prof. Karuna Nikum

www.aceiciate.in ISBN : 978-93-5311-039-0International Conference on Innovative and Advanced Technologies in Engineering-2018

Paper ID: 1 Title: An Android based application to find misplaced phone (FIND IT)

Author1: Author2: Author3: Author4: Author5:

Rasika Bhave Ameya Sandim Aditya Sawant Prof. Bhanu Tekwani

-

Abstract: The proposed system will implement an android application which will help the users tofind the phone misplaced in the vicinty. Nowadays, everyone is dependent on their mobile phonesfor almost everything and if the phone is misplaced for a while he/she becomes impatient. Inaddition to this if the phone is on silent mode, this worsens the problem. Using this application willhelp the user to find the phone without manually searching for it. Thus, saving time of the user.This application will work in two different modes viz. 1. Finding the phone with VoiceRecognition. 2. Finding the phone with Message.

Paper ID: 2 Title:Analyzing 5G: Prospects of Future Technological Advancements in Mobile


Siddhika Arunachalam

Shruti Kumar Harsh Kshatriya Prof. MahendraPatil

-

Abstract: A new mobile network generation usually refers to a completely new architecture fromAnalog (1G) to GSM (2G) to CDMA (3G) and finally to LTE (4G). So, the next fundamental stepbeyond fourth-generation LTE networks is being referred to as "5G" by the industry. The term 5Gis also known as World Wide Wireless Web (WWWW). The main purpose of the 5G is to designthe best wireless world that is free from limitations and hindrance of the previous generationsbecause wireless system designers have been facing the continuously increasing demand for highdata rates. This paper throws light on the development of 5G technologies as a cornerstone forrealizing breakthroughs in the transformation of mobile networking. This paper represents theintroduction of 5G technology, evolution, need, hardware and software requirements,specifications, network architecture of 5G wireless technologies and its future scope.

1


Paper ID: 3 Title: Smart Axibot


Kunal Kashikar Rashmi Bhagat Apurva Nachare Amesha Shigwan Mahalaxmi Palinje

Abstract: CNC based machines are widely used in industries in a variety of tasks such asengraving, drilling, cutting and much more. Making use of such machines will eliminate the laborwork and also efficiency and accuracy will be increased. In this study, design and implementationof a multipurpose robot, based on computer numeric control (CNC) is emphasized. This createdsystem can be used in two different ways. One as a DrawBot, for the activities such as drawing,writing, etc. and the other as laser an engraver which can be used for basic laser engravingapplications. The system is designed to nurture the economic aspect of technology as it makes useof Arduino Uno as a signal generator. The correct and efficient arrangement of mechanicalstructure and proper use of the programs along with the circuitry makes this system worksefficiently and accurately.

Paper ID: 4 Title:A Novel Approach of Load Balancing In Cloud Computing


Prof.Krishnanjali J.Shinde

- - - -

Abstract: Cloud computing is the new technology, which is totally dependent on the internet tomaintain large applications, where data is shared over one platform to provide better services to theclients belonging to a different organization. Load balancing is playing a vital role in maintainingthe rhythm of Cloud computing. The performance metrics of load balancing algorithms in cloudare response time and waiting time. Load balancing is one of the main challenges in cloudcomputing. It is a technique which is required to distribute the dynamic workload across multiplenodes to ensure that no single node is overloaded. So that various Load balancing approaches helpin optimal utilization of resources and hence in enhancing the overall performance of the system.

2


Paper ID: 5 Title:IOT Based Gas Leakage Detection System with Database Logging, Prediction and Smart Alerting- Review


Chaitali Bagwe Vidya Ghadi Vinayshri Naik Neha Kunte -

Abstract: IoT is an expanding network of physical devices that are linked with different types ofsensors and with the help of connectivity to the internet, they are able to exchange data. ThroughIoT, internet has now extended its roots to almost every possible thing present around us and is nomore limited to our personal computers and mobile phones. Safety, the elementary concern of anyproject, has not been left untouched by IoT. Gas Leakages in open or closed areas can prove to bedangerous and lethal. The traditional Gas Leakage Detector Systems though have great precision,fail to acknowledge a few factors in the field of alerting the people about the leakage.

Paper ID: 6 Title:Study of Hand Gesture Recognition System for Indian Sign Language - A Review


Mayank H. Mehta Kamakshi P. Banavalikar

Jigar M. Parekh Prof. Suvarna Pansambal

-

Abstract: Sign Language is the primary means of communication for the hearing and speechimpaired community. The problem arises when speech impaired or deaf people try to expressthemselves to others with the help of these sign language grammars. Whereas other peoplethemselves are not aware of the sign language. Hence it is commonly seen that conversation ofdeaf and speech impaired people are limited to their family members only. Sign languageinterpretation system can be used to help the impaired communicate and interact with peoplewithout the disability. Gesture interpretation systems can be vision based or glove based hardwaresystems. Thus, this paper compares the vision based systems and the traditional hardwareapproach. It has been noticed that the traditional hardware approach has challenges over Visionbased System. By efficient use of computer vision and pattern recognition, it is possible toimplement it for communication purpose.

3


Paper ID: 7 Title:Performance Improvement by Implementation of Kanban in ServiceSector


A. S. Aradhye Dr. S. P. Kallurkar

Abstract: In current competitive scenario, the lean concepts are like solution tools for thecompanies, facing difficulties in making profit. Waste elimination from the process is the mainfocus in the industry thus creating products to the end user with less investment. The Just in Timeis a technique, focusing on providing a guide way to the industries to reach minimum inventorystage. A case study conducted in a temple, where waiting period of pilgrims are more onpilgrimage day. The sole effect of this paper is to identify the problems in the present darshansystem and replace it with Temple - Pull - Kanban system. A kanban board is developed toschedule the darshan system in accordance with arrival of pilgrims. On arrival, pilgrims aregrouped into batches of predesigned capacity.

Paper ID: 8 Title: Anti Drowning system using remote alert


Tejaswini Chaudhari

Yash Kava Gaurang Pandit Pratik Gupta Prof. Mohan Kumar

Abstract: This system is very helpful for saving the life of a person drowning in the water. This isdone by informing the heartbeat rate of any person in the water to the lifeguard. Our system willmonitor the heart rate. It will then transmit using RF. its range would be around 5-6 meters, ifunder water around 2-4 meters. For this the system includes transmitting and receiver circuit. Thereceiver circuit is with the lifeguard to inform about the person's heart beat rate, while thetransmitting circuit is with the person in the water.

4


Paper ID: 9 Title:Traffic Density Based Smart Signaling System Using Image Processing In MATLAB


Priyanka Pote Jyotsna Gosavi Shubham Padwankar

Poonam Salunke Prof. Divya Sharma

Abstract: Today's traffic management system has no significance on live traffic scenario, whichleads to amateurish traffic management systems. These traffic timers just show the pre-set time,this is like using open loop system. If we consolidate a closed loop system using camera, it ispossible to predict the required time on traffic light timers according to the traffic density. If thetraffic light timers are showing only required time to regulate the traffic, then the time wasted onunwanted green signals (green signal, when there is no traffic) will be saved. Timer for each lane isthe simplest way to control traffic and if those timers are predicting required time based on trafficdensity present in the lane then automatically the system will be more efficient. This proposedsystem measures the number of vehicles present in each lane using image processing in MATLABsoftware. It aims to control traffic based on current scenario of the traffic density present on theroads and also gives emergency alert to clear the lane in which emergency vehicle such asambulance is detected irrespective of the traffic density.

Paper ID: 10 Title:Raspberry Pi and Arduino based book management system


Deepak V. Thambi Ankit A. Patil Pranay V. Shah Tanas Ahmed Prof. Manoj Mishra

Abstract: As the world is becoming digital, a book management system will help to reduce thehuman efforts. By using the system that we have created, one can easily check the availability ofbooks in any library, bookstore, etc. In this system that we are implementing, an Android basedapplication is used at the user end to check for the availability of books. Primarily, the user isrequired to go at the issue desk if one wants to borrow any new book. Here a fingerprint module isinterfaced with a microcontroller(Arduino UNO) to authenticate the user in order to give accessthem to the books database. Only users that areauthenticated can borrow a fixed number of booksfor a predefined duration.An RFID (Radio Frequency Identification) tag is embedded in books toprevent theft. The user needs to scan the book before exiting the room. A Raspberry Pi board isused for linking fingerprint module with the user database.

5


Paper ID: 11 Title:High End Security System Based On Internet of Things (IOT)


Shubhangi Dongre Shivali Ghag Shraddha Satpute Nikhil Todankar Prof. Prajakta Pawar

Abstract: Automation is a trending topic in the 21st century making it play an important role inour daily lives. The main attraction of any automated system is reducing human labour, effort, timeand errors due to human negligence. With the development of modern technology, smartphoneshave become a necessity for every person on this planet. Applications are being developed onAndroid systems that are useful to us in various ways. Natural language is the another upcomingtechnology which enables us to control electronics device using voice command. Combining all ofthese, our project presents a microcontroller based voice controlled home automation system usingsmartphones. Every application in his/her home will be control by user with their voice.

Paper ID: 12 Title:Android Based Optimum Configuration for Car Parking


Kajal Patil Pranita Patil Sweeti Rane Radhika Redkar Prof.Gauri Salunkhe

Abstract: Searching for parking space in cities not only consumes time but also becomesinconvenient during peak hours. This leads to traffic congestion and wastage of fuel. The smartparking system is an integrated system to organize cars in public parks. This provides beneficialinformation about the availability, car parking suggestion and guidance, mapping of the parkingIOT and real-time notifications. It offers customers the possibility to reserve their parking slots inadvance. IR sensors and Raspberry Pi are used to detect the vehicle movement and number ofavailable parking slots. The IOT based real-time information is provided on the android app and itis user- friendly. QR code is used for the secured access. The app helps the user to find real-timeparking space and is accordingly navigated. It is cost-effective, saves time and reduces traffic.Commercial complex or residential complex owners can get a full control over their parkingsystem, thus it provides efficient management solution.

6


Paper ID: 13 Title:Wi-fi based Aquaponic system using ARM LPC2148


Vaibhav Thakur Mahek Shaha Karuna Pawar Akanksha Bhargawa

Abstract: Applications related to the web, different databases and multiple advanced mobileplatforms can enable real-time data acquisition for effective monitoring on smart agriculture. Toproduce new facilities for aquaculture production automation and to achieve greater efficiency, thisproject presents an application for wireless network and Android platform that unites with anadvanced control system to collect and monitor variables applied in aquaculture. The test andapplication shows that it is stable, has a high price-performance ratio, great mobility and easy tooperate, It has a strong practicality and application possibility.

Paper ID: 14 Title: Self Balancing Unicycle


Aditya Devaskar Arunkumar Dubey Gautam Prince Tejas Abhange Meenakshi Saraon

Abstract: Self-Balancing Unicycle is based on the principle of inverted pendulum. It consists ofboth hardware and software implementation. Mechanical model is based on the state space designof the cart pendulum system. To find its stable space inverted position, a generic feedbackcontroller i.e. a PID controller is used. According to the situation, we have to control both angle ofpendulum and position of cart. Mechanical design consists of brushless DC motor Hub Motor,Arduino controller unit, IMU sensor Inertial Measurement Unit and motor driver as a basic need.The acceleration and angle with respect to vertical ground is provided by the IMU sensor. Themotor controller which is attached with the motor controls the speed of the motor. These systemparameters determine the force needed to balance the unicycle.

7


Paper ID: 15 Title:Wireless Power Transfer of Renewable Energy


Aniket Pachchhapur

Mihir Joshi Suyog Talekar Ajinkya Lahane Mohan Kumar

Abstract: We Cannot imagine the world without electric power. Generally the power istransmitted through wires. This project describes an original idea to avoid the harmful usage ofelectrical wires which involve tedious process of organizing them. Imagine a future in whichwireless power transfer is feasible: cell phones, household robots, mp3 players, laptop computersand other portable electronics capable of charging wirelessly, instead of using bulky batteries. Thispaper describes about the utilization of solar energy and the wireless transmission of the generatedpower. The solar power is first stored in a battery then transferred through wireless medium byinductive coupling.

Paper ID: 16 Title:Sentry Gun


Niraj Gupta Geet Jaguste Shilpee Jaiswal Niyaz Jamadar Jyoti Dange

Abstract: In classical guard system we may need to have more than one person to guard importantplaces in order to increase the scope of the guard, and keeper cannot continuously monitor theimportant places which were guarded endure some effects such as drowsiness and fatigue whichaffect the accuracy of gun shooting. The main objective of this project is to build an automaticguard system by using control of gun and camera performs tracking depending on that servomotors move and points the gun towards the person using Arduino controller.

8


Paper ID: 17 Title:Immediate Rescue System with Anti-theft Protection


Jigar Bhatt Nimisha Menat Pradnya Mestry Manali Mestry Divya Sharma

Abstract: The work presented in this paper covers the development of a low cost robust embeddedsystem using Global System for Mobile Communication (GSM) and Global PositioningSystem(GPS) technologies that is capable of ensuring prompt action in case of a vehicle crash innotifying emergency hotline services. GSM module Sim900a and GPS module Sim28ml serve asthe key components in the system with Atmega328p as the microcontroller. The system alsoacknowledges the issue of vehicle theft and tactfully notifies the owner in case of a car theft. Anumber of tests of the system in lab proved the system to be extremely accurate and quick in termsof response which can further be replicated in a real working environment as a fully functionalsystem in a car.

Paper ID: 18 Title:M-governance- A Technological Innovation in India


Neha Vora - - - -

Abstract: India is heading towards good governance and globalization at a significantly fast pace.India has been doing things manually for ages, right from managing data, applications and othergovernment operations. The time when digitization took over the world India also welcomed itwith open arms. The idea of digitization would certainly solve much of the problems that thecountry is facing. It is the launch of "Digital India Campaign" by Prime Minister Narendra Modi inJuly of 2015, truly transformed the country while eliminating a lot of human and managementproblems. Most of the government departments now have transformed to digital platforms andmost importantly mobile platforms.

9


Paper ID: 19 Title:Smart, Healthy and Natural Air Cleaner with Microcontroller using Android Application


Soham Kulkarni Irfan Idrisi Jenil Sangoi Narender Singh Prof. Prajakta Pawar

Abstract: Green and clean environment across the globe is very essential for the health of thenature. Unfortunately, different pollutions are affecting the quality of the environment around us.Monitoring is the first step to safety. To avoid pollution situation we need to develop an automatictoxic gas detection and alerting system using android application. Therefore, we proposed a modelby using a natural plant pot, which can detect pollution, waters plant time to time. In pollution,avoiding situations high oxygen release plants plays important role. This project is mainly dealingwith "Air pollution", which is a very sensitive issue in developing and developed countries and isdirectly affecting the human health and disturbs the biological balance of mother earth.

Paper ID: 20 Title:Heart Beat Sensing Without Physical Contact Using Signal and Image Processing


Nayan A. Naik Bablu T. Patel Apurva J. Parulekar

Mahendra Patil -

Abstract: Heart Rate Variability analysis has been gaining attention from researches due to itswide range of applications. As we know there are many ways to sense heart beat but there are veryfew techniques by which we can sense heart beat without any physical contact. The subtle changesin static scene which are invisible to the naked eye can be detected using signal and imageprocessing. This technique involves color change detection and evaluation of heart rate usingfrequency change. This technique also monitors the abnormal movements which cannot be seen bynaked eyes.

10


Paper ID: 21 Title:Smart Web Based Application for Smartphone Addiction


Roshni Katrodia Jinal Harsora Karishma Chogale Nikita Patil -

Abstract: In this rapidly developing world where everything is stepping forward, technology is nobehind. Technology has done such kind of transformations that seemed to be impossible to evenimaginethem few years ago. No doubt it has been serving millions of people with its advantagesand features. But the side effects of the same cannot be neglected. Today the world is so muchinvolved into technology especially smartphones that they are not only affecting them physicallybut also mentally. So it's a high time people especially young adults cut off and limit its use. Theidea of this paper exactly serves the same. We implement this system using an Android app whereuser need to set a time limit for any particular user downloaded app which will get blocked if thetime limit is exceeded by the user. This will help those who are addicted to smartphones.

Paper ID: 22 Title:Can Based Accident Avoidance System


Mayur Shinde Nidhi Pandey Pritham Shetty Harsh Umrania Prof.Manoj Mishra

Abstract: Safety is generally the most significant property for automotive systems, and it isfurther improved by Advanced Driver Assistance Systems (ADAS) in modern automotive systems.To support ADAS and other advanced autonomous functions, automotive electronic systemsbecome more distributed and connected than ever, no matter from the perspective of in-vehiclearchitecture or Vehicle-to-X (V2X) communication. The Controller Area Network (CAN) protocolhas been the main focus of automotive security studies, and it has no direct support for securityprojection. Hoppe et al. demonstrated that the operations of electric window lifts, warning lights,and airbag control systems may be affected through the CAN protocol. A collision avoidancesystem is an arrangement of sensors, microcontrollers and buzzers that is placed within a car toalert its driver of any dangers that may lie ahead on the road.

11


Paper ID: 23 Title:A Study of Variuos Methods to Establish Underwater Wireless Communication


Snehal Gawde Priyanka Ghanekar

Vaishnavi Hajare Dhanashree Hirave

Prof.Jyoti Mali

Abstract: Terrestrial communication has always been on the rise in terms of technologicaladvancement. But in recent years the focus has been shifted on underwater communication. Deepseas and ocean have always been a source of great mystery to mankind. There is still a vast arenayet to be uncovered. Underwater wireless communication in particular is garnering a lot ofattention worldwide. It is of great interest to military, scientific communities, tourist industrialist toname a few. It also plays an important role in oceanography research, pollution monitoring and tostudy aquatic flora and fauna. There has been a surge in underwater communication functionalitydue to increase in its possible potential applications. The objective of this paper is to make acomparative study of the available methods to implement underwater wireless communication.Finally we analyze these techniques and understand the reliability of each of these techniques.

Paper ID: 24 Title:Implementation of Children Tracking System on Android Mobile Terminals


Yuvraj rathod Manoj Dighole Prof. Ritu Sharma

Abstract: Now a day in all over the world in every 40 seconds child become missing orkidnapped. The increasing prevalence of children wandering has many parents very concerned. Wehave to see and read many stories about children's or students who are kidnapped or not reachinghomes. Most of the stories have had tragic endings. This paper focuses on implementing childrentracking location system for every child attending school. Nowadays more children getting lost,Sen. Charles Schumer has proposed that the federal government provide funding for trackingdevices for Autistic children so they do not go missing. These proposed tracking devices can beworn as wrist watches, anklets or in I -cards. The child module include ARDUINO, Globalpositioning system, Global system for mobile communication and receiver include parents mobilephone. It is very useful for women safety.

12


Paper ID: 25 Title:Computer independent USB to USB transfer


Jaimin Shah Awad Shaikh Siddhi Jadhav Gourav Kundu -

Abstract: Portable data storage devices that use the universal serial bus(USB) for data transfer are widely used. Therefore, it is necessary to design a device which will provide quick method to transfer data from one storage device to another without the need of computer. This device stays clear of viruses and malware which can harm the computer. It is a user friendly and compact and optimum data transfer speed.

Paper ID: 26 Title:Smart Antennas for Mobile Communication


Prof. Manoj Mishra

Sushmita Shivalkar

Geeta Yadav Swapnali Patil Rinky Yadav

Abstract: This paper present brief on wireless mobile communication using digital or adaptiveantenna which is also called as smart antenna.Such type of system can place nulls in the directionof interferers via adaptive updating of weights linked to each antenna element. Thus it helps tocancel out most co-channel interference. This paper explains about the radiation pattern of theantenna and why it is highly preferred in its relative field.

13


Paper ID: 27 Title: Organic Led


Prof.Manoj Mishra

Sweety Vade Shrutika Sawant Shriwari Shedge Ketaki Waikul

Abstract: In this paper we propose the information about the organic light emitting diode . ourmain objective in this work is to study the structure, functioning,advantages and disadvantages ofthe organic lED. The information consists of how the organic LEDs will replace the ordinaryLEDs in near future.Self-emissive organic light-emitting diodes (OLEDs) are a new promisingtechnology with high expected profitability on the display market, which is currently dominated byliquid crystals.Despite intense research efforts during the last decade there are still improvementsto be made in OLED-lifetime and OLED-outcoupling.

Paper ID: 28 Title:Detection of Potholes using Image Processing Techniques


Akshata Bhat Pranali Narkar Divya Shetty Ditixa Vyas -

Abstract: Roads are considered to be the main mode of transportation. But due to this heavy useof roads and environmental factors, these roads need a scheduled maintenance. Often thismaintenance is not performed since it is not possible to monitor each and every place or simplybecause of ignorance. This leads to the formation of potholes which causes unwanted traffics andthe majority of accidents. This paper discusses about the detection of potholes using camerainstalled on light poles of roads. Image processing techniques have been used which informs theBMC officials in a timely manner using email system, thus keeping manual labor to the minimum.For testing its performance, the proposed system has been implemented under a Windowsenvironment using OpenCV library. Simple image processing techniques like canny edge andcontour detection with hough transform is used for effective pothole detection.

14


Paper ID: 29 Title:Fitness Solution Using Hybrid Algorithm


Akshay Chougule Sushant Gawade Nimit Dave Prof. Aruna Pavate

Abstract: The paper presents the overview of proposed recommender system which helps tomaintain people healthful eating routine which in turn would raise their energy and efficiency ofwork. The nutrition consists of protein, carbohydrate, and fat. People having the habit of eatingjunk food with high carbohydrate and fat which increases the possibility of suffering from lots ofchronic diseases so there is a need of the system that provides the suggestion for balanced nutritionbased on diet and daily routine. This work proposed sequential hybrid algorithms to optimize thedecisions based on existing knowledge and gives the suggestion of diet and exercise.

Paper ID: 30 Title:Redesign of Gear Shifter Assembly for Indica Vista using Quality Function Deployment – A Case Study


Prof. Shrikant T Jagtap

Prof. ShrikantKallurkar

Abstract: Quality function deployment is one of the total quality management quantitative tooland technique that could be used to translate customer needs and specifications into appropriatetechnical requirements. This paper presents a redesign of Gear Shifter Assembly for Indica Vista.'Voice of the Customer' is translated into customer needs which are then converted into technicalspecifications. Due to this,the frequency of the complaints were reduced drastically hence themarket share of the Indica Vista has also gone up and the customers were satisfied which wasconcluded by the surveys in the public issues, which had a strong impact on the JDP rating as well.

15


Paper ID: 31 Title:Public Distribution System Using Aadhaar Card


Amogh Kamerkar Sonali Mhatre Prof.Nilesh Gode

Abstract: The Public distribution system also called as the ration distribution system is meant todistribute the commodities to the poor people manually. The present PDS system involves a lot ofmalpractices and also it consumes lots of time. To overcome these problems we can use theAadhaar card based PDS system. The Aadhaar card is used instead of the ration card, whichconsist of all the details of the card holder. The proposed system replaces the manual work in theration shop. The main objective of the designed system is the automation of the ration shop toprovide transparency. The customer needs to enter their aadhaar card number and then the systemchecks the number and validates the information. Validation is done by the system from the onlineaadhaar database using the Internet.

Paper ID: 32 Title: Designing a Data Warehouse for an ERP Using Business Intelligence


Sanket Masurkar Aishwarya Datalkar

Nishad Jadhav Sachin Gavhane -

Abstract: To make the process of fetching of the data from the data base faster the system isproposed in this paper. It takes the data regarding various products into consideration so as todemonstrate the processing of the recommendations to the user based on the transactions of theprevious users. The system forms the various schemas to fetch the data at much faster rate. Whilethe previously Organizations used the single database to retrieve and fetch the data, making theprocess slower. Thus this paper put forth the system of the fetching the data at the faster rate and soas to recommend the products to the users using rule based and apriori algorithm.

16


Paper ID: 33 Title:To Study IOT Based Intelligent Billing System


Shweta Sane Sneha Mundale Prof.Sandip Zade

Abstract: This paper studies various methods which are proposed in past few years for automaticmeter reading. The study explains how these meter reading systems are widely useful in order toavoid issues such as manual work, manipulation in reading, inaccurate billing system etc. A lotwork has been carried out to overcome such problems occurred while taking electricity meterreading. Different techniques are introduced in course of time to make electricity meter readingsystem fast and accurate. Some of these methodologies are explained in this paper.

Paper ID: 34 Title:Automatic Energy Meter Reading System Based On IOT


Mitalee Nagvekar Megha Mane Prof.Sandip Zade

Abstract: All human beings use different types of technologies in many fields. Nowadays, theenergy provider company's employs visit each house and record the meter reading manually. Thisproduces errors due to human intervention, hence proposed system reduces manual work, time andmakes this system accurate and user friendly. Common errors like extra bill amount or notificationfrom electric board even though the bills are paid will be overcome. Design and implementation ofproject is mainly based on PIC microcontroller using IOT. In this system, the live meter readingcan be displayed on the VB application to the service provider and for consumer android app isdesigned through which bill is calculated and a message is sent to user. Any person can pay theirbills through the android app using two options , either they can do recharge of specific amountlike prepaid system or they can pay the bill using account. A specific amount equal to the bill isdeducted from users account. This system also can be used to complaint when needed.

17


Paper ID: 35 Title:Exploratory Data Analysis Using Dimension Reduction


Tejas Nanaware Prashant Mahajan Ravi Chandak Pratik Deshpande Prof. Mahendra Patil

Abstract: Exploratory Data Analysis (EDA) is a complex process having multiple steps. Themotive of this paper is to explain how the method of dimensionality reduction is used to performEDA. This paper outlines techniques used for EDA as well as approaches adopted to achievedimensionality reduction. Particularly, two approaches are explained with the help visualrepresentation of the data, namely Principal Component Analysis (PCA) and t- DistributedStochastic Neighbor Embedding (t-SNE). We explain how high-dimensional data set can bevisualized into the lower dimensions, retaining the implicit structure of the data. The visualizationsproduced by the two methods are compared to discuss the pros and cons of each method pertainingto our system.

Paper ID: 36 Title:Souls of the Wrath: The VR Game


Niryan Valia Shikha Doshi Parth Patel Samira Nigrel -

Abstract: Educational VR game is designed for Vocabulary building and is implemented tocultivate student's language skills. The proposed framework consist of video game play which istraditionally associated with sedentary activity and is also ubiquitous game play paradigm thatencourages users to engage in Vocabulary building using First Player Shooting (FPS). Use ofeducation in VR technology will promote development in VR industry, also provides educationalresources and also supports students autonomy learning which rises the idea of smart learning. Thefeature of providing education in form of VR game will be a key point as application of VRtechnology in the field of education.

18


Paper ID: 37 Title:Rf Energy Harvesting & Data Analytics


Divyansh Singh Darshan Rawal Mahesh Sahani Aman Patel Jyoti Dange

Abstract: With the increasing use of non-renewable sources of energy in today's world, it becomesvery important to preserve the resources for the upcoming generations. So in this paper we presentan alternative source of energy as RF energy. This RF energy can be converted into electric energyand be used in low powered wireless devices. And we can find maximum energy at particularlocation by Data Analytics. Machine learning proves to be one of the best way to do the dataanalytics. Thus, in short, having a continous source of electricity with its data analysis proves toserve a better way of using and preserving energy.

Paper ID: 38 Title:Leukemia Detection With Image Processing Using Matlab And Display The Results In Graphical User Interface


Prof. Jyoti Dange Karan Goraksh Jay Herekar Manish Nishad Kishan Sharma

Abstract: Different approaches in Image Processing are widely used in the field of medicine andsince health is the factor being considered, it must be vigilantly done. This study aims to develop asystem that will apply the different techniques of Image Processing and Genetic Algorithm,specifically in automating the detection of Leukemia. The benchmarks in detecting Leukemia thatare being used by the medical experts on a blood sample structure are taken into account. Theresearchers will create a system that will accept a blood image and process it using the saidmethods and added a Naïve Bayes Classifier in the detection process. A total of 100 blood imagesare used in evaluating the system..

19


Paper ID: 39 Title:CRISICROSS: One Stop Application For All Kind Of Emergencies


Patra Ganesh Sah Eshant Yadav Rupnarayan

Yadav Pradeep Chandak Sumita

Abstract: The epoch of information technology has become a pivotal part of our dynamic life ofevery human being in the world and usage of smartphones is rising exponentially. Althoughtechnology is advancing, but its results are seen only in fewer fields. For example, Emergencymedical service in India is lagging behind other countries. This is partially because of lack oftechnology implementation at ground zero. This paper presents a proposed idea that tries to figureout various loopholes of the present emergency medical response system, also emphasizes to givea measure to find a substitute or an altogether different approach to ensure person's safety. Thus,this paper discusses the various issues and also gives an idea of the proposed system and itsworking details too.

Paper ID: 40 Title:Bike Part E-Tailer System Using Apriori Algorithm


Omkar Kale Vikrant Kharatmal Amey Ghodke Shweta Sharma

Abstract: This is an online Bike and bike parts store that has listings of various bikes along withtheir features. It also consists of Bike service Registration. The system allows user to checkvarious articles submitted by user and even comment on them. User can even rent bikes using oursystem feature dubbed 'Rent a bike' . This system allows user to buy a bike, bike parts andinventory online. The visitor who visits the system must register himself before making apurchase. After registration user can login to the system with his username and password in orderto access the system.

20


Paper ID: 41 Title:Structural Health Monitoring Of River Bridge


Siddhesh Mulik Rohan Kalapad Amit Upadhyay Gaurav Shirke Ankur Bhattacharjee

Abstract: Bridges are extremely important part of society's infrastructure and reliablemethods are necessary to monitor them and ensure their safety and efficiency. Bridgesdeteriorate with age and early detection of damage helps in prolonging the lives and preventcatastrophic failures. Most bridges still in used today were built decades ago and are nowsubjected to changes in load patterns, which can cause localized distress and if not correctedcan result in bridge failure. One of the major causes of the structural health degradation isscour. There are other parameters like vibration of bridges, vibration near pier which alsoaffects structural health of bridges. This proposed work consist the various existing scourmonitoring techniques. This system consists of 8051 controller which uses IOT technology.

Paper ID: 42 Title:Artificial Intelligence Based Traffic Management System


Prathamesh Shetye

Kapil Shetye Isha Doshi Namrata Lade

Abstract: One of the basic necessities which we consider to live in a neighbourhood is how thepeople commute.Roads are the basic means of commutation in any country.Due to the increasingpopulation and the growing economies,the number of vehicles purchased and driven has increasedmanifolds.The result of this drastic increase is traffic jams in metropolitans.The two major reasonsbehind these traffic jams is CONGESTION and CONTENTION between the vehicles.Due to thesecircumstances,there is a considerable loss of time leading to growing frustration indemned in thepeople especially the working class which eventually leads to accidents and breaking traffic laws.The proposed system works on the images captured by the traffic cameras and processed by theDSP processor.

21


Paper ID: 43 Title:Digital Pen For Handicapped And Old Age People


Saurabh Salunkhe Tejal Gotad Rohini Kadam Prof. Sandip Zade

Abstract: This paper presents digital pen for handwritten digit and gesture trajectory recognitionfor Handicapped person. The accelerometer based digital pen for handicapped and old age peopleconsists of basically three main parts i.e triaxial accelerometer, microcontroller and RF wirelesstransmission module. This parts used for sensing and collecting accelerations of handwriting andgesture trajectories of hand motions of paralyzed patient. The minimized features are passed to aneural network for recognition. The main important experimental results have successfullyvalidated the effectiveness of the trajectory recognition algorithm utilized in Digital Pen proposedin this paper.

Paper ID: 44 Title:Motor Controlled Car For Surveillance Using Raspberry Pi


Apurva Gimonkar Priyank Nair Rohan Chache Rudra Jathar Namrata Lade

Abstract: In the present world, everyone is worried about their safety due to increase in crimerate. This has led to an increase in the importance of a surveillance system. A system is designedfor continuous monitoring and also the system provides live streaming. The system can bedeployed at the anyplace i.e. office, house and some remote place where people cannot monitor theparticular place. The system acts like a Robot within a local area network.

22


Paper ID: 45 Title:Design Of Universal Controller System For Fluid Transfer With Wireless Monitoring


Vinod Mandavkar Nikhilkumar Patel Sudhanshu Parkhi Nitesh Hankonkar Niranjan Samudre

Abstract: Fluid management in various industries, buildings, farming, etc is very crucial part yetthe technology to manage them lag behind. This paper discusses an optimum solution for theproblem of managing various fluids using a single type of controller system. The UniversalController system is capable of measuring various parameters for different fluids. Sensors areinstalled in the tanks between which the transfer of Fluid has to be done. The user specifies thecondition for switching the pump ON and OFF, by means of software running wirelessly on acomputer or on an android application. By analyzing the respective conditions of the differentparameters configured by the user, the controller controls the pump. This system makes use ofUltrasonic sensors for level sensing. It has onboard Bluetooth and Wi-Fi for quick and remoteinteraction with the controller and for the purpose of Data Logging.

Paper ID: 46 Title:Teenhub - Recommendation System


Pranav Jain Kedar Kale Ganesh Choudhary

Paresh Aher Deepali Maste

Abstract: The concept of TeenHub falls into two domains: Machine Learning and Advanced WebApplication. In TeenHub, the aim is to visualize the Machine Learning algorithms on the webapplications by using smart data visualization tools, algorithms and techniques and not limitingthem to just run onto terminals. It will be an all in one package for entertainment news and ratings.

23


Paper ID: 47 Title:Different Wireless Data Transfer Techniques &Review


Saideep Shirsat Akash Shinde Akshay Tate Prof. Namrata Lade

Abstract: This paper basically highlight a wireless data transfer that have been proposed from pastfew years on data communication. Red Tecton is a technology that enables communicationbetween people and object in close area.Research on data transfer has widely covered applicationsuch as serial communication , security purpose , marketing applications, inscription of datatransfer ,real time operation base and many more. RedTacton uses the minute electric fieldgenerated by human body as medium for transmitting the data. . In this paper we evaluate thedifferent wireless data transfer technique.

Paper ID: 48 Title:Text Extraction and Translation Using Image Processing and Augmented Reality


Tejas Parkar Devanand Haldar Prof. Snigdha Bangal

Abstract: Augmented Reality is a technology that has changed the face of smartphone apps andgaming.But recently,it also has been emerging in the education fields.With a motive of improvingthe quality of teaching and learning experiences ,there has been a rapid increase in mobile appsdevelopment in education.Therefore, this paper reviews several literatures concerning theinformation about mobile augmented reality and exemplify the potentials for education.

24


Paper ID: 49 Title:Iot BASED INTELLIGENT GARBAGE MONITORING SYSTEM


eveneet Johar pranali Redij rahul Mishra sayali Patil jyoti Mali

Abstract: Waste management is simple yet effective ways of reducing the amount of wastedumped into our landfills. But there are people who are unaware or even choose to ignore the factthat waste segregation and recycling are environment friendly solutions to the problem of wastesmanagement and disposal. In the Philippines, there are recycling centers but the process is tediousand done manually. There are guidelines implemented by the government with regards to recyclingbut these efforts have yet to touch the mindset of the people. Escalating amounts of recyclablesthat are not maximized and indifference in proper waste segregation has led to the group indeveloping a solution to this. This project IOT Based Intelligent Garbage Monitoring system is anewfangled system which will keep the cities clean.

Paper ID: 50 Title:Analysis of Accumulative Effect of Harmonics on Low Voltage Distribution Network


Bharat Mishra Karuna Nikum Rakesh Saxena Abhay Wagh -

Abstract: In typical Low voltage (LV) customer are supplied through single phase and three phasesupply from distribution transformer. As the residential and commercial loads are linear andnonlinear in nature. These nonlinear loads produces harmonics into the system. These harmonicsare varying in nature and the collective effect of harmonics on the LV system is considerable. It isnecessary to analysis of collective harmonic impact of distributed harmonic source on LV system.This paper presents a experimental study of harmonic distortions caused by nonlinear loads inresidential and commercial customers through power quality(PQ) monitoring.

25


Paper ID: 51 Title:CABAL: Training and Placement Departmental Portal


Jidnyasa Raut Komal Patil Payal Gothi Riddhi Kamat Prof. Nileema Pathak

Abstract: This paper is named "CABAL" which is a training and placement portal wherein agroup of people (students) come together to participate in the training and placement relatedactivities in college. Cabal is a web-based portal, which can be accessed securely by the studentswith their credentials. This Portal helps training and placement department for completeautomation i.e. from sending notifications about registration to company visit as well as reports aregenerated according to the students who are selected previously depending on placement year, girlto boy ratio, department wise, graph of the students who were unplaced. This is to minimize themanual work, provide a complete overview of passed placement details and maximumoptimization.

Paper ID: 52 Title:Resume Ranker


Devraj Redkar Sanjay Payiri Durgesh Sawant Vishal Prajapati Nileema Pathak

Abstract: The proposed method is to understand the intelligence behind the hiring pattern andapply the machine learning to accommodate the identified intelligence. The proposed methodoffers the ranking system according to the hiring patterns. This paper proposes a highly trainedmodels along with the traditional search method, predicts the ranking and sorting of resumes withhigh accuracy and simplifies the job of human resourcing efficiently.

26


Paper ID: 53 Title:Camouflage Color Changing Robot For Military Purpose


Hitesh Shinde Kirti Sonawane Pranit Rane Atharva Pathak Sumita Chandak

Abstract: Camouflage robot is solution for reducing human losses in military operations orterrorist attacks. They play major role in saving human lives. The proposed system consists of onecolour sensor camera as part of camouflaging feature and other camera for surveillance purpose.Colour sensor camera senses the colour of surface and according to that robot will change itscolour. Because of this feature this robot can't be easily detected by enemies. We have usedWireless transceiver for communication between transmitter and receiver. This robot can quietlyenter into enemy area and send us the information via camera. The movement of this robot iswirelessly controlled computer. Since human life is always valuable, these robots are thesubstitution of soldiers in war areas.

Paper ID: 54 Title:Wireless Cnc Plotter


Poonam Revankar Shrey Kharde Hitesh Mangaonkar

Nakul Pawar Ameya Jadhav

Abstract: In today's world humans and man labor is being taken over by machines and the futureof humans in the field of engineering will be replaced by these machines which will be fullyautomated, now in today's automation field "CNC" is a machine which is used to do particular jobsby just a click or in a press of buttons, inspiring to this we have created a CNC plotter which doesthe job of creating easy and complex designs by just simple software and it is just made out ofscrap dvd drives, the idea of using dvd drives strikes because it consists of two stepper motorswhich has proper provision of axis. Transmission of command is done wirelessly using Zigbeewhich makes this system portable. The power requirement of this CNC plotter is very low becauseit is based on a very low level motor mechanism. The project has a main Arduino input as its brainto understand the language and convert it to the digital signals understood by the servo motors inaxis.

27


Paper ID: 55 Title:Video Analytics


Prof. Akanksha Bhargava

Santosh Gaikwad Mayur Bangar Vijay Chalke -

Abstract: In today's world, face recognition is an important part for the purpose of security andsurveillance. Hence there is a need for an efficient and cost effective system. Video analytics orintelligent video surveillance (IVS) is a technology that uses software to automatically identifySpecific objects, behavior or attitudes in video footage. Face detection applications employalgorithms focused on detecting human faces within larger images that might contain landscapes,objects and other parts of humans. Video Analytics helps security and public safety organizationsdevelop comprehensive security, intelligence and investigative capabilities using video. Now toprovide two level security we have added abnormal activity detection feature with face recognitionto our proposed system. This is done by using hardware section. Thus our system will provideautomatic monitoring to protect our important things from intruders in efficient and efficient way.

Paper ID: 56 Title:Web Based Farming App


Akshay Chaudhar Arjun Salgaonkar Apoorv Tiwari Amruta Mhatre -

Abstract: We make the direct link between the vendors and farmers through which farmers shouldsale their production directly to vendors without any commission agent. A push towards higherproductivity will require an information-based decision-making agricultural system. Farmers mustbe get information at the right time and place. Farming systems are defined by the patterns in timeand space in which producers grow their crops; the management decisions regarding the inputs andproduction practices used; the management skills, education, and objectives of the producer; thequality of the soil and water; and the nature of the landscapes and ecosystems within whichproduction takes place. It is a web based application.

28


Paper ID: 57 Title:Web Based Student Information Management & Analysis


Sudharani Metkari Afra Shaikh Mahesh Jadhav Omkar Choudhari Reena Mahe

Abstract: Nowadays, maintaining records and information is Very crucial task in any field.However, managing a record of a particular student is a very tedious task as there are lumps ofinformation which needs to be considered starting from student's attendance to their performanceinto tests/semesters and so on. Maintaining records of a student along with their overall growth intheir curriculum and coordinating with their parents is quite difficult in real life. This study on"Web Based Student Information Management & Analysis" is to design and transform the way ofsearching, sorting and accessing the information for a student into electronic records which can beviewed not only by the students or their respective mentors but also by the parents. The existingsystem was studied and hence a computer- based website is provided to replace this manualmethod of reaching out to the parents of a student by a mentor

Paper ID: 58 Title:Rfid Based Attendance System Using Face Recognition


Gayatri Gupta Shweta Jadhav Vinaya Gurav Akshay Juwale Disha Bhosle

Abstract: Face is the identity of a person. The methods to exploit this physical feature have seen agreat change since the advent of image processing techniques. Traditional approach for attendanceis professor calls student name & record attendance. Students attendance in the classroom is veryimportant task and if taken manually wastes a lot of time. This system consists of five phases-RFID tag detection, face database, face detection, face recognition and marking attendance. Thisattendance is recorded by using a RFID card and camera attached in the system that is capturingimages of students. The system first registers student's information , in that student's RFID tagnumber, stores the faces in database, and then face detection is done . The detected faces arecompared with faces stored in database. If system recognizes the face then attendance will bemarked..

29


Paper ID: 59 Title:Obstacle Detection Using Ultrasonic Sensor For Amphibious Surveillance Robot


Shashank Parkar Vaibhav Paradkar Akshar Parmar Devashish Panchal

Dr. Bhavin Shah

Abstract: Obstacle detection is highly significant in remotely operated surveillance devices. In theproposed paper a sensing system using ultrasonic sensor is developed for obstacle detection in anamphibious robot. The sensor used is JSN-SR04T. Using this sensor the device can detect theobstacles in the path for both land and water areas. This sensor is a different version of theconventional and widely used HC-SR04 ultrasonic sensor. It follows the same principle as theorthodox ultrasonic sensor. It can detect any object up to a range of 2-4 meters which is highlyeffective for a small scale underwater drone. The proposed model is controlled by a Raspberry Pi 3module. It has been designed for static and dynamic obstacle detection.

Paper ID: 60 Title:Effectiveness Of Virtual Learning And E-Learning In Engineering Education


Mahendra Patil Dr. Mamta Meena Nikita Patil Foram Shah Nisha Varghese

Abstract: This paper aims to explain didactic learning in engineering education aided by theimplementation of Spoken Tutorial. In experiential learning the learner learns from the experiencesand then develops new skills, different outlook or innovative thinking through reflection of suchexperiences. Experiential learning coupled with Spoken Tutorial guarantee accurate achievementsby improved and increased employability through active and continual learning. This paper forcesone to look into different aspects of experiential learning by means of comparison of TeachingLearning and Spoken Tutorial. It also attempts to present the outcome of experiential learningresulting from identification of environmental effectiveness and facade of the entire learningprocess.

30


Paper ID: 61 Title:Conventional Data Mining And Sentiment Analysis In Predicting Stock Values


Sachin Gavhane Sanchit Chavhan Amruta Pokhare Snigdha Wasnik Jyothi Arun

Abstract: In this research work importance of sentiment analysis for stock market indicators suchas Sensex and Nifty has been done to predict the price of stock. Stock market has traditionallybeen the proving grounds for data mining applications. There is a lack of efficient models whichcan emulate the heuristic reasoning of humans based on current events/trends. The proposedsystem is an attempt to reconcile computed sentiments alongside traditional/more common datamining. Datasets consisting of historical data as well as recent headlines will be mined to ascertainstock price movement. This system aims to predict stock price movement more accurately byemulating instinctual reasoning by implementing sentiment analysis.

Paper ID: 62 Title:Microcontroller Based Fruit Sorting Using Image Processing In Matlab


Devendrasingh Jhala

Anjali Bagade Siddhesh Naik Sayli Lad Dr. Bhavin Shah

Abstract: The objective of this system is to do automatic fruit sorting. For fruit sorting the fruitcolour ratio which is calculated by RGB colour model which is used for classification feature. Forevaluating the quality of fruit, image processing using MATLAB software is used than the sortingpart is done by the microcontroller and motor. The purpose of using automation is to evaluating thequality of fruit using traditional method which can bring human error so to minimize it this systemis being designed.

31


Paper ID: 63 Title:Raspberry Pi Based Live Streaming For Amphibious Surveillance Robot


Devashish Panchal

Vaibhav Paradkar Shashank Parkar Akshar Parmar Dr. Bhavin Shah

Abstract: Surveillance has a paramount importance in today's fast changing world. Real-timesurveillance is an indispensable component in any environment where there is an immense need ofsecurity for both personal and commercial resources. Technology today is used in various ways inorder to provide us such surveillance. This feature is extremely useful for real-time surveillanceand monitoring.The optimum amount of sensing devices must be integrated into the system forefficient real-time surveillance.There is a rise in demand for a compact and robust surveillancesystem that can function both on land and water, which requires a proper real-time surveillanceset-up, for effective supervision of surrounding environments. In this model live streaming isachieved by using net-cat streamer. Raspberry Pi 3 is used for live streaming. The client-servermodel is TCP/IP. This real-time streaming model is a part of a semi-autonomous land and watersurveillance system.

Paper ID: 64 Title:Revolution In Travelling With Intelligent Road Safety System


Vijaykumar Gupta Trilok Patel Tanay Ash Suraj Yadav -

Abstract: Every year there are thousands of highway accidents and serious injuries due to "Run-Off-Road".In most of the cases crashes occurs either due to carelessness or due to lack of roadsafety awareness.Various modules can be installed inside vehicles, embedded with various featuresto improve the safety of road . The features that are proposed in the project are automatic collisionnotification ,sign board notification system which notifies driver about controlling of speed indifferent zones, no honking notification, smart overtaking system for other vehicles specially onsingle lane roads and Alcohol detection system which detects drunk driving . This all are thefeatures which together can give impetus to an efficient road safety system

32


Paper ID: 65 Title:Android Based Secret Information Sharing Using Steganography


Srishanth Shetty Pawan Sharma Om Kadam Ritu Sharma

Abstract: In this paper, we have proposed an Android Application based on Image Steganographyusing Least Significant Bits (LSB) algorithm. Steganography technique helps to share secretinformation behind an image cover object by changing the least significant bits of the Image pixelsas Image acts as a best source for hiding message which cannot be detected by Human Eye. In thisapplication, text information is encoded behind Image cover object at the sender and decoded atthe receiver, provided by additional security features in the application.

Paper ID: 66 Title:Visual Cryptography For Color Images


Akshay Gawade Mitesh Rambade Kuntan Sutar Sudarshan Chavan Prof. Priyanka Sharma

Abstract: Visual Cryptography (VC) is a secret sharing scheme, which implements the techniqueof secretly sharing the visual information like pictures, text etc. Existing VC technologies are notable to maintain the contrast quality of original image after the processing. So to preserve thecontrast quality of original image and provide a higher security, this project presents a novelsolution in which image is broken down into number of shares. These shares are send to receiverthrough different transmitting medium in encrypted format. In this method, the one with all theshares is able to achieve secret information; otherwise it is not possible to reveal any information.

33


Paper ID: 67 Title:Heart Disease Prediction Using Data Mining


Palash Ukey Vinit More Pravin Patil Amruta Sankhe -

Abstract: In today's modern world we have various heart related problems that require immediatediagnosis and remedy. So, to overcome these diseases, we are designing a Web application withthe help of Data Mining Techniques that will help us identify various heart related problems andprovide solutions to it. We decided to build a project which we name as HEART DISEASEPERDICTION. In this, we are giving the user quick guidance about heart disease through anIntelligent System Online. By adding basic details about the heart disease, patient can diagnose thecondition or problem he/she is having with this Web based application. The application is fed withvarious details and the heart disease associated with those details. Through this application weallows user to share their heart related issues. In order to guess the most accurate illness that couldbe associated with patient's details, Data mining techniques are being used. Based on result, systemautomatically shows the result along with the specific doctors for further treatment.

Paper ID: 68 Title:Automated Electric Meter Reading And Monitoring System


Harshvardhan Sakhare

Shaishav Oza Suyash Gaonkar Vishal Gorule Prof. Sumita Chandak

Abstract: In recent years, automated meter reading systems (AMR) are being utilized in mostdeveloped countries. The advantages these electric metering system offers make is a moreaccurate measuring device than the conventional electromechanical meter reading system. AMRscapacity to automatically transmit data real-time increases the reliability of this metering system,unlike electromechanical meters which occasionally make use of previous readings as a basis ofthe consumer's current billing. It also puts consumers at a disadvantage as the accuracy of powerconsumption readings is being compromised.

34


Paper ID: 69 Title:A Study Of Structure From Motion Photogrammetry For Generating 3D Model From 2D Images


Yug Shah Suyog Raut Sagar Wadle Smita Patil -

Abstract: With the advancement in technology and the rapidly increasing usage of internetapplications for online shopping, there is an increase in the need and expectation of the onlineconsumers.The online commerce that are used now for shopping mostly provide a 2D view of theproducts . Therefore buyers have only partial view of the product they intend to purchase.Therefore We aim to develop a 3D grocery review application that would provide a 3D object viewof the products online using reconstruction.3D modeling is a process of mapping an object into thereal-world coordinates in 3 dimensions representing the height, width and also the depth..Traditional and recent technology for building 3D models from images include photogrammetry,structure from motion and other 3D scanning approaches such as laser, lidar, etc have beendiscussed in this study. Photogrammetry is a process of extracting features from images thatmeasurement of an image(distance,height etc) and then structure from motion , to build a 3Dmodel from those images.Later,using three.js generated model will be displayed .THREE.JS is aWEB API for 3d modelling.

Paper ID: 70 Title:Comparative Study on Approaches of Data Masking


Mridul Chavan Ketki Joshi Vidhya Chaudhary Ilu Mandaliya Supriya Mandhare

Abstract: In today's scenario, data is the most valuable commodity for every organization andsecuring organizational data is a top concern of the IT industry. The top data security issues areexternal attacks, lack of accountability, vulnerabilities in the system, data breaches. To tackle them,algorithms and mechanisms are set up for providing security from threats outside the organization,but data is left vulnerable to insider attacks. Data within an organization is accessed based on theprivileges and access levels but this does not ensure complete data security from the breaches andpassive attacks. Data is constantly moving from one environment to the other, that is, fromproduction environment to non- production environment for testing, data interpretation andanalysis, data warehousing, mining and other research purposes. This paper proposes the idea ofmasking the non-production data which contains personally identifiable information (PII) and atthe same time maintaining compliance with various government policies and regulations. The aimis not just simple masking of the data but obfuscating the real data with a pattern that appearsrealistically similar to the real data. This paper illustrates the static and dynamic maskingapproaches to data.

35


Paper ID: 71 Title:Spring Mvc E-Cops Enforcement Portal


Sanket S. Karshinkar

Prajakta R. Kharat Apurva S. Bhagat Neha Singh

Abstract: E-Cops Enforcement Portal aim at Centralizing Information Management in Crime forthe purpose of fast and efficient sharing of critical information across all the police station.Citizens in India are not convenient going to a police station to submit a case because of manyreasons like fear from criminals, lack of time or ignorance. Therefore many of the cases are notregistered in police station and lots of filed cases are not investigated due to lack of properevidences and cooperation of public. This application will provide a platform for public to reportabout crime to nearest police station without any fear. This method will be helpful to generalpublic and police to provide better services for public at the same time using this applicationprocess work can be easily monitored by higher authorities. E-Cops is Web based applicationwhich will be available for every citizen to lodge a complaint and report a crime even when user isin move. At Present Police department is following manual procedure.

Paper ID: 72 Title:Emg Controlled Prosthetic Limb


Mayur Dhonde Yogesh Gaikwad Omkar Phadke Deepesh Povalekar

Niranjan Samudre

Abstract: The EMG Controlled Prosthetic Limb is an electromechanical device which can be usedby amputees to perform their daily physical activities with ease. The system consist of EMGElectrodes which are attached to the body of the user, a signal processing unit to convert the signalinto usable form, a microcontroller to analyse the signal received from signal processing unit andthen send a signal to servo motor unit present in the prosthetic limb to perform motion accordingly.The circuitry is powered by batteries. The signal processing unit consists of InstrumentationAmplifier and Band Pass Filter

36


Paper ID: 73 Title:Building Effective Association Amongst The Academia World And Industry World


Mahendra Patil Dr. Mamta Meena Deepali Maste Rajendra Deshpande

Dr. S. P. Kallurkar

Abstract: Academia and industry share a collegial relationship. Academia produces graduateswho are captivated by the industries in the end. The quality of research works from differentUniversities are too worthy to be taken by the industries and convert those highly engrossingresearch works into products and services. The academia and industry are like two sides of a coinsupporting each other's existence but there always existed a gap between the two spheres. Theobstacles seems to be unseen till a point is reached where a graduate is asked to meet the industryrequirements all at once. The academia must start giving training in an industrial perspective. Theacademia must go hand in hand with the industry in knowing the latest technology updates orideas, job nature in industry, which all can be accomplished with a small regulation in thecurriculum to meet industry requirements thereby moulding the graduate to compete with theoutside industry world.

Paper ID: 74 Title:Advance Mechanized Metro Train


Bomdar Bagra Vinay Kesharwani Neeraj Singh Roheet Khambe Niranjan Samudre

Abstract: The project is a prototype project and this project is to demonstrate the technology usedin all advance metro train system. However, the technology is already adapted in most of thedeveloped countries. The additional features have been added in this project electronically andmechanically as well, so to achieve high safety, quick delivery without any traffic congestions. Thetrain runs between two predefined stations without having any driver inside in it. The mostsignificance attributes of this prototype project is its safety system. This project makes use ofmicrocontroller AT-Mega 328p as central processing unit which control every functions of thetrain. This Advance Mechanized Metro Train perform automatic open and closing of door in eachstation and collision avoidance whenever the two train lies on the same track. The train is highlysensitive to any obstacle that comes into the track. The train will automatically stop when anyobstacle is detected to prevent from being happening of any casualties.

37


Paper ID: 75 Title:Automatic Ques0tion Paper Generation

.Author1: Author2: Author3: Author4: Author5:

Manas Jadye Yash Keer Prof. Smita Patil

Abstract: Generation of question papers through a question bank is an important activity inlearning management systems and educational institutions. The quality of question paper is basedon various design constraints such as whether a question paper assesses different problem solvingskills, whether it covers all units from the syllabus of a course and whether it covers variousdifficulty levels. The basic idea is by using some constraints namely question paper format,coverage of syllabus, coverage of difficulty levels and also it is extensible to support any numberof user defined constraints. Also, with the help of Microsoft Excel it becomes easier to upload bulkdata. Preparing the exam questions is very challenging, tedious and time consuming for theinstructors. Thus we put a solution to this problem as an Automatic Question Paper Generation.From the above constraints the question paper will be generated automatically . The final paperwill be stored as Word file. The generated question paper will be then mailed to the respectedinstitutes before the exam in PDF format.

Paper ID: 76 Title:Paisheya-The Object Tracker


Hemal Oza Ishit Sanghvi Parth Hingu Yash Gandhi Chanda Chouhan

Abstract: An efficient object tracking system calle, Paisheya,is designed and implemented fortracking the movement of any equipped object from any location at any time. The proposed systemmade good use of a popular technology that combines a Smartphone application with amicrocontroller. This will be easy to make and inexpensive compared to others. The designed in-object device works using Global Positioning System (GPS) and Global system for mobilecommunication / General Packet Radio Service (GSM/GPRS) technology that is one of the mostcommon ways for object tracking. The device is embedded inside a object whose position is to bedetermined and tracked in real-time. A microcontroller is used to control the GPS and GSM/GPRSmodules. The object tracking system uses the GPS module to get geographic coordinates at regulartime intervals. The GSM/GPRS module is used to transmit and update the object location to adatabase. A Smartphone.

38


Paper ID: 77 Title:Speaking System For Mute


Padmakshi Bhat Aamir Ansari Sweden D'silva Abhilasha Baphna

Abstract: Human Computer Interaction pushes ahead in the field of communication throughsigning translation. Gesture based communication Interpretation framework is a decent method tohelp the hearing impeded individuals to associate with typical individuals with the assistance ofPC. Vision based hand signal acknowledgment framework have been talked about as hand playscrucial correspondence mode. Thinking about prior announced work, different proceduresaccessible for hand tracking, segmentation, feature extraction and classifications are listed. Theaim of this system is to enable the correspondence of two to individuals, one speaking weakenedand one with no speaking inabilities by changing over speech to finger sign and finger sign tospeech. Finger sign (Gesture) is a subset of Sign Language and utilizes finger signs to spellexpressions of the talked or composed dialect. By proficient utilization of PC vision and patternrecognition, it is conceivable to deal with such framework which will be characteristic andacknowledged as a rule.

Paper ID: 78 Title:Electromagnetic Space Laucher


Abrar A Khan Gaurav Valanju Akshay Surdas Sonam Kandalgaonkar

Abstract: An electromagnetic space launcher was designed to boost large models. In this projectwe are trying to develop a strong electromagnetic field to boost a specific package into the spacewhich can be satellite or launcher missile.EML(electromagnetic launcher) was first design byNASA for satellite launch but this project was just on paper as there are also some of thelimitations accorded. We are trying to develop a launching pad which cans boos a filament in aspecific direction with the help of electromagnetic field. With the help of some of the referencesand the literature review on this paper project can be developed practically so that we can replacethe conventional method of space launcher as huge amount of fuel is used. By electromagneticspace launcher; fuel which is used in conventional method can be saved as this is a main intentionof this project.

39


Paper ID: 79 Title:Exam Cell Automation System


Prof.Sejal Dmello Ashraf Pinjari Harishchandra Damre

Aishwarya Sankhe Vrushali Ambre

Abstract: Currently Exam cell activity mostly includes a lot of manual calculations and is mostlypaper based. The project aims to bring in a centralized system that will ensure the activities in thecontext of an examination that can be effectively managed. This system allows students to enrollthemselves into the system by registering like by providing their Enrollment number, Name, email,examination, semester, etc. Examination Cell Automation System is developed for the college tosimplify the activities of Staff and Students .It facilitates to access the examination information ofa particular student in a particular department. The information is stored into the database,whichwill be provided by the teacher for a respective student. Here the admin updates the student details,staff details and can add or delete them.

Paper ID: 80 Title:Smart Trolley In Malls


Premprakash Pal Harshada Sonawane

Mahalaxmi Palinje

Abstract: Nowadays purchasing and shopping at big malls is becoming a daily activity in metrocities. Customer in shopping malls are facing problems like pulling heavy trolley from rack to rackfor collecting items and after total purchase customer needs to go to billing counter for payments.At the billing counter the cashier prepares the bill using bar code reader which is a time consumingprocess and results in long queues at billing counters. To overcome these problems, amicrocontroller based system is proposed which is totally automatic. The system will be placed inall the trolleys. It aims to reduce the long queues at billing counter by scanning the product bycustomer before placing it in the trolley and displaying the total amount of bill and the quantity ofproduct scanned on the spot. This proposed system follows the customer while shopping andmaintains the safe distance between customer and itself.

40


Paper ID: 81 Title:Impact of IOT on Education System


Priya Borade Sandesh Borade

Abstract: In current era of digital revolutions, IOT Techniques of educations helped to increasethe scope of education, literacy percentage and interest of education in students. It will beeconomical model for students, working humans. This is Transformation of education fromphysical -> Video conferencing -> IOT. Traditional education is currently physical one to oneteaching and learning model in which both the physical entities has to available and It will beconducted for that during the specific timings. Various ways has been initiated to educate peopleand make more people literate but there are limitations due to various factors such as money, timeavailability, physical presences etc. In this paper we have focused on the applications and benefitsof the IOT over the traditional education system.

Paper ID: 82 Title:Ethics: A Doctrine Essential For Humanity


Rajendra Mahajan

Abstract: Ethics are very essential in each and every profession to save humanity. Engineering isno exception to this theory as it is an important and learned profession. It is expected everywhereto show highest level of professionalism. While following the professionalism one should notneglect the ethics for the benefit of self and the employer. The ideas and projects of engineers havea direct and crucial impact on the quality of life for all people. Accordingly, the services providedby engineers require honesty, impartiality, fairness, and equity, and must be dedicated to theprotection of the public health, safety, and welfare. This paper aims to focus on the ethics and togenerate the feelings of moral responsibility towards the society.

41


Paper ID: 83 Title:Recommendation System Using Product Rank Algorithm For E-Commerce


Urvesh Rathod Prof. Aruna Pavate

Vaibhav Patil

Abstract: Evolution of E-commerce in today's scenario is deliberately growing, and in order toboost client's sales and stay ahead of the competition, it is important to get on with online shoppingtrends and understand customer's needs. Shopping websites have shown atremendous rise inproduct availability on the website in past few years. This arises a problem of exploding databases.Websites use many data mining algorithms and recommendation system but still, users might ormight not get the best product for their search which results in declination of customer experience.Minimizing the search results to optimality and integrating products from multiple websites caneconomize time and customer's experience. Moreover, no shopping website has price tracking andprediction algorithm for thecustomer. Our System tends to provide customers with rich andexpensive products from all available shopping websites at thecheapest price of their choicewithout using manual filters, with the help.

Paper ID: 84 Title::A Review on Trajectory Data Mining


Komal Gothwal Varsha Salunkhe Ashmita Shetty Dimple Bafna

Abstract: Fast progress of area procurement innovations supports the age of trajectoryinformation, which track the hints of moving articles. A trajectory is ordinarily spoken to by asuccession of timestamped geological areas. A wide range of utilizations can profit by thetrajectory information mining. Bringing remarkable openings, vast scale trajectory informationlikewise posture incredible difficulties. In this paper, we overview different uses of trajectoryinformation mining, e.g., way disclosure, area expectation, development conduct examination, etcetera. Besides, this paper surveys a broad accumulation of existing trajectory information miningmethods and talks about them in a system of trajectory information mining. This structure and theoverview can be utilized as a rule for planning future trajectory information mining arrangements..

42


Paper ID: 85 Title:A Review on Ocr Systems


Shantanu Wagh Prasad Shetty Kunal Sonawane Vivek Sharma Varsha Salunkhe

Abstract: OCR (optical character recognition) started long back and has evolved step by step to amuch better and efficient system today. Several different approaches were used to recognize thepatterns of the characters. These approaches were later developed and a new OCR machineemerged with each development promising more accuracy and speed with capacity of extractingdifferent types of characters and shapes at a time. There are many articles published on OCR fromthe past few decades and many commercially available OCR are available too. In this review weare going to highlight the history and various techniques used throughout the entire course of OCRevolution and development.

Paper ID: 86 Title:Image Classification By Combining Wavelet Transform And Neural Network


Jyoti Kolap Jay Solanki Avinash Sharma Bhavya Shah Aditya Sawale

Abstract: In present-day classification of multi-class image play an important role in engineeringand computer vision application like image processing in biomedical, retrieval of content basedimage. From some past years researchers and scientists have made a lot of efforts in theimplementation of an advanced image classification approaches. Image classification is one of theclassical problems of concern in image processing. Image classification is both challenging as wellas important task. There are various approaches for solving this problem. In this proposed methodour objective is to successfully classify an image from given large image database. Image featureswhich contained most important information for successful classification are extracted by usingHaar wavelet and Daubechies wavelet (db4) wavelet discrete Mayer wavelet (demy).In thisproposed method received image features are first used with ANN for training and testing and thenused same image features of different wavelet transform for KNN training testing. Finally, weevaluate the performance of both ANN and KNN classifier with different wavelet Features.Highest classification efficiency is received by Dmey based ANN classifier.

43


aper ID: 87 Title:Secure Transfer of University Question Paper Using Image Steganography


Sanjeev Bhogan Sai Kumawat Ajay Chawla Aditya Chaudhary Prof. Snigdha Bangal

Abstract: This paper discusses on how the security of question paper delivery can be enhanced byimage steganography. There are a lot of cases of university question paper leakage. Due to this,university has undergone various problems in order to tackle this event. The current system thatthe university uses for question paper transfer is based on face detection which is not very reliableand can be exploited. Moreover, this transfer process is not very secured and is a complex process,so we have developed our system to enhance the security of the transfer process.

Paper ID: 88 Title:Accelerating The Degradation Kinetics of Azo Dyes Using Iron Oxide Nanoparticles


Priyanka Patel Sudheer Lingayat Nitin Gulvi Purav Badani

Abstract: Azo dyes have a wide spread industrial applications. When released in water bodies,these dyes hinder the penetration of light which results in adverse effects on aquatic life. Hence itis pertinent to treat the dyes before their discharge in environment. Present work focuses ondegradation of azo dyes (via chemical route) using NaBH4 as a reducing agent. For this purpose,Fast Sulphone Black F (FSB-F) dye was used as a model system. FSB-F has an absorption maxima(λmax) at 464 nm in aqueous medium. On reduction, FSB-F is converted into its correspondingleuco-form which has poor absorption in visible region. Time required for complete degradation ofFSB-F was observed to be ~ 7 hrs. With a view to enhance reaction kinetics, system was loadedwith iron oxide nanoparticles, keeping all other experimental conditions identical. In presence ofiron oxide nanoparticles, complete degradation of dye was accomplished within 1 hr. Thus, ourstudy suggests that nanoparticles plays a potent role as catalyst for reaction involving dyedegradation

44


Paper ID: 89 Title:Cloud Computing: A Perspective Study


Sufiyan Kazi Vipul Padgal - - -

Abstract: Cloud computing can be defined as reliable services that are delivered through datacenters which are built on compute and storage technologies. Consumers are able to useapplications and data from a cloud anywhere in the world on demand. Services like Google Docsare cloud Computing , where your document exist on the company's servers and you can reachthese documents easily and work on them without using your own hard drive. A cloud is a type ofparallel and distributed system consisting of interconnected and virtualized computers. Cloudcomputing uses 'Hadoop' software that implements a cloud on a cluster of computers. GoogleApps, Google Maps and Gmail are all based on the cloud .Other major web players includingAmazon, eBay, yahoo and Facebook are running some sort of an enormous cloud computing.Computing at the scale of the cloud allows the users to access supercomputers-level power andstorage. The concept behind cloud computing is to scale your application by deploying it on a largegrid of commodity Hardware boxes. Thus, cloud computing and storage compiles physicalresources into scalable and shareable resources over the internet.

Paper ID: 90 Title:Content-Based Real Time Video Copy Detection Using Hadoop


Pramodini Kamble

Priyanka Shejawal Tejaswi Surve Kushal Yadav Prof. Bhushan Patil

Abstract: Due to emerging interest in videos along with the evolution of new technology andfacilities, today the amount of videos on the internet is increasing enormously. But these videos donot hold original content and are simply revised versions of the original videos. The purpose of theVideo Content Copy Detection is to detect the copied videos and find the similarities among them.The currently available video copy detection algorithms have certain limitations, such as itrequires more time for searching and gives inaccurate output. TIRI-DCT algorithm along withBrightness Sequence algorithm is implemented to overcome the problems in the existing system.For the significant improvement in the processing of videos we use Hadoop platform in distributedfile system and for vital practical significance in video tracking and real time video contentretrieval.

45


Paper ID: 91 Title:Movie Success Prediction


Komal Gothwal Dhiral Sankhe | Nirav Waghela Mitul Sharma Ramanand Yadav

Abstract: In this system we have developed a mathematical model for predicting the success classsuch as flop, hit, neutral of the movies. For doing this we have to develop a methodology in whichthe historical data of each component such as actor, actress, director, music that influences thesuccess or failure of a movie is given is due to weight age and then based on multiple thresholdscalculated on the basis of descriptive statistics of dataset of each component it is given class flop,hit, neutral label. Based on the weight age of historical data of each film crew the movie will belabelled as neutral, hit or flop. This system helps to find out whether the movie is super hit, hit,flop on the basis of historical data of actor, actress, music director, writer, director, marketingbudget and release date of the new movie. If the movie releases on weekend, new movie will gethigher weight age or if the movie releases on week days new movie will get low weight age. Thefactors such as actor, actress, director, writer, music director and marketing budget historical dataof each component are calculated and movie success is predicted. This application helps to find outthe review of the new movie.

Paper ID: 92 Title:Smart Anti-Theft System For Vehicle Security And Tracking


Raj Kupekar Prasad Lawte Prasad Nate Gaurav Narvekar Mahalaxmi Palinje

Abstract: Nowadays most of the public are having their own vehicles also on the other hand thereis a need to provide security for vehicles from any external threats. Smart anti-theft system forvehicle security and tracking is used to provide the fundamental security to vehicles. This systemis accompanied with a keypad part, placed on the door outside the car to authenticate the validuser. Global Positioning System (GPS) and Global System for Mobile communication (GSM)provides the current location of the vehicle. The system is also designed to recognize any unusualvibrations in case if the car undergoes an accident and sends the respective signal to the ownerthrough GSM. This is achieved by using MEMS accelerometer.

46


Paper ID: 93 Title:Recognition And Recall Based Graphical Password Authentication


Mr. Santosh M.Dodamani

Ms. Aarti B.Valsang

Abstract: Security is that the degree of protection to persons or person against danger, damage,loss, and crime. The need for security often means that standard human-computer-interactionapproaches cannot directly apply. Nowadays, as day today activities are more open to the internet,the importance of security for applications is tremendously increased. Using static passwordsalone makes it easy for the hackers to hack the users account. An important usability goal forauthentication system is to support users in selecting better password. User often createsmemorable passwords that are easy for attackers to guess, but strong system assigned passwordsare difficult for users to remember. So researchers of modern days have gone for alternativemethods. Here a graphical password is discussed.

Paper ID: 94 Title:Plagiarism Detection And Visual Inspection Of Data


Pranoti Nage Priyanka Sharma Vaishali Salvi Reena Somani Sejal D'mello

Abstract: Digital documents are vulnerable to being copied. Most existing copy detectionprototypes employ an exhaustive sentence-based comparison method in comparing a potentialplagiarized document against a repository of legal or original documents to identify plagiarismactivities. This approach is not scalable due to the potentially large number of original documentsand the large number of sentences in each document. Furthermore, the security level of existingmechanisms is quite weak; a plagiarized document could simply by-pass the detection mechanismsby performing a minor modification on each sentence. In this paper, we propose a copy detectionmechanism that will eliminate unnecessary comparisons. The system will parse the data tocompare against the data obtained from web to detect plagiarism using Hadoop in the backend toincrease the efficiency of the system.

47


Paper ID: 95 Title:Concise View At The Super-Dense Plasma State


Abhilasha Saini Dr. Sudhir Bhardwaj

Dr.O.S.Lamba Dr.P.N.Nemade

Abstract: The vital intent of the physics behind the relativistic bulky-ion encounters is to unlockthe inherent attributes of the completely novel phase of vigorously interacting nuclear stuff,commonly denominated as the quark-gluon plasma [1]. For the purpose of attaining this goal, oneentails the authentic signals for the creation of such a phase or stage. This probe attempts to detainindispensable proposals also the ongoing stature of the abstract studies made for the mostencouraging quark-gluon plasma indicators. These propounded quark-gluon plasma signatures canbe studied in conformity with the physical traits of super-dense hadronic stuff to which they aresentient of. Here a perfunctory review of the contemporary depiction of the dynamical andconstructional features of QGP phase, its erection and evolution is proffered. This certainly assistsone for better assimilation about the very novel quark gluon state.

Paper ID: 96 Title:Blended Learning By Incorporating LMS, E- Learning & Traditional Learning To Suit The Changing Requirement Of Learner


Mahendra Patil Amruta Mhatre Divya Kumawat Ajeet Ghodeswar

Abstract: This paper discusses one of the best practices for e-learning in Atharva College ofEngineering (ACE) with blended learning. The paper discusses the blended learning and itsadvantages as well as disadvantages. The main focus of this paper is to show how CourseNetworking was introduced as a blended learning tool in the Academics and how it improved theteaching learning process as well as the outcomes. The paper outlines the strategy and theframework designed by the Department of Computer Engineering and how it made the difference.The paper highlights the positives as well as area of improvement of the Course Networking as ablended learning tool.

48


Paper ID: 97 Title:Review on Resource Allocation Strategies In Cloud Computing


Varsha Salunkhe Komal Gothwal Ashmita Shetty Dimple Bafna

Abstract: Cloud Computing has a great impact on IT industries. Central storage is being the needof current generation and this can be achieved using cloud computing. Cloud uses huge number ofresources to provide its services. Managing the resources effectively has become a new challengein today's world. The workload in cloud computing changes as per the demand and thereby needsdynamic resource provisioning and allocation. In cloud computing, resources are allocatedeffectively with high resource utilization and low cost. This work presents a comprehensive In thispaper, we have discussed various optimal resource allocation schemes reviewing the resourceallocation strategies.

Paper ID: 98 Title:A Review on Internet of Things


Ashmita Shetty Varsha Salunkhe Komal Gothwal Dimple Bafna

Abstract: Internet, a progressive creation, is continually changing into some new sort ofequipment and software making it unavoidable for anybody. The type of correspondence that wesee now is either human-human or human-gadget, however the Internet of Things (IoT) guaranteesan awesome future for the internet where the kind of communication is machine-machine(M2M).Internet of Things (IoT), which will make a tremendous system of billions or trillions of"Things" imparting with each other, are confronting numerous security issues..

49


Paper ID: 99 Title:Deploy Hadoop For Processing Text Data To Run Map Reduce Application On A Single Site


Shrusti Talati Dr. Mamta Meena Shrutika Mallya

Abstract: The arrival of many ubiquitous devices, social networking and other sources of data hascreated a large amount of data with greater velocity and variety. Multiple organizations areapplying big data analytics to challenges such as detection of fraud, analysis of risk, analysis ofsentiments, analysis of equities, forecasting of weather, recommendations of various products andtheir classifications. So the big data is a collection of large datasets that cannot be processed usingtraditional computing techniques. Hadoop is a Java based open source platform that can processthis data over thousands of distributed affordable commodity nodes and deliver predictive insights.It is designed to scale up from single servers to thousands of machines, each offering localcomputation and storage. In this paper we have installed and configured Hadoop on Windowsplatform. We have run an application in three wordcount languages , which are MapReduce

Paper ID: 100 Title:Ransomware:Past, Present, And Future.


Shilpa Jaiswal Ritu Sharma Kunal Shriwas Jyoti Gurav

Abstract: On 12 May 2017, a massive ransomware attack occurred across a wide range of sectors,including health care, government, telecommunications and gas. To date, WannaCry has spread toover 300,000 systems in over 150 countries. The countries that appear to be the most affected areRussia and China, probably because of the high percentage of legacy software, with significantimpacts elsewhere, notably to the UK National Health Service. The spread of the ransomwarereportedly slowed in the two days following the launch of the attack, in part due to the discoveryof a "kill switch" in its code. However, there are reports of new variants of the malware (such asUiwix) which do not have this kill switch. Data on new variants is unconfirmed and limited at themoment,and EY wil publish updates as more information becomes available.

50


Paper ID: 101 Title:Mapping Hindi Text Document Into Graph Structure


Yogita Shelar Pragyamani Sharma

Vaishali Salvi Jyothi Arun

Abstract: In this paper, we present a Mapping Hindi text document into graph structure andexternal program for pre- processed frequently, proper or further. It is derived using naturallanguage processing as follows. Firstly subject – verb – object triplets are automatically extractedfrom the Hindi dictionary obtained for each sentence in the document. Secondly, extracting thetriplets and enhanced by linking them to their corresponding co-referenced named entity, byresolving pronominal anaphors as well as attaching the associated Word Net synset.

Paper ID: 102 Title:Overview And Applications of Artificial Neural Networks


Jyoti Jeetendra Gurav

Shilpa Jaiswal Ritu Sharma Kunal Shriwas Divya Sharma

Abstract: ARTIFICIAL NEURAL NETWORK INTRODUCTION The simplest definition of aneural network, more properly referred to as an 'artificial' neural network (ANN), is provided bythe inventor of one of the first neurocomputers, Dr. Robert Hecht-Nielsen. He defines a neuralnetwork as: "...a computing system made up of a number of simple, highly interconnectedprocessing elements, which process information by their dynamic state response to external inputs.ANNs are processing devices (algorithms or actual hardware) that are loosely modeled after theneuronal structure of the mammalian cerebral cortex but on much smaller scales. A large ANNmight have hundreds or thousands of processor units, whereas a mammalian brain has billions ofneurons with a corresponding increase in magnitude of their overall interaction and emergentbehavior. Although ANN researchers are generally not concerned with whether their networksaccurately resemble biological systems, some have. For example, researchers have accuratelysimulated the function of the retina and modeled the eye rather well. Although themathematics...........

51


Paper ID: 103 Title:Wildlife Animal Location Detection And Health Monitoring System


Kushal Naik Rohit Yadav Omprakash Verma Dhruv Zanzrkiya Professor Meenakshi Saraon

Abstract: As we know, animals form a big part of the ecosystem. Their existence is veryimportant for the balance of the ecosystem. But nowadays, more and more animals are gettingendangered and are on the verge of extinction. So, to save these animals from extinction, humansreserved forest areas (Sanctuaries and national parks) for their safety. However, some animals dieddue to bad health which couldn't get any attention to. To avoid such casualties, animal locationtracking system with a health monitoring system is used. This system uses a pulse radar to keep thetrack of animal's health and the usage of Global Positioning System, we get the exact location ofthe animal. So, no time is wasted for the animal to be attended to.

Paper ID: 104 Title:Review Paper on Optimization of Cotton Ginning And Pressing Plant


Ramkrushna S. More

Dr. Ajay U.Awate - - -

Abstract: The process of separation of fibre from cottonseed is called Ginning . Compositeginnery performs ginning and pressing operations to convert lint cotton into a bale. In modern day,various technology and pressing machinery are devolved This review paper discusses a presentwork for modern technology implemented in a modern gin, to configure an optimal set ofequipment during ginning to produce quality cotton. Along with The future expectations oftechnological development in the Cotton Ginning & Pressing Technology.

52


Paper ID: 105 Title:Devices Used For Measuring Solar Radiation – A Review


Vishrut Shenoy || Priyanka Tripathi || abhishek Mahadik || Puja Nalawade || Aditya Mahajan

Abstract: Different instruments, satellite data and simulation softwares are available formeasuring solar irradiation intensities but efficiency and accuracy of all devices are different. Thispaper represents detailed comparison of various measuring instruments based on efficiency, costeffectiveness, availability, accuracy, compactness and reliability .Importing solar radiationmeasurement instruments is very costly from economic and maintenance point of view fordeveloping countries so it is preferred to construct devices from locally available equipments

Paper ID: 106 Title:Analyzing Effect of Structural Equation Modeling (SEM) Approach in E-Commerce


Priyanka Sharma || Pragyamani Sharma || Pranoti Nage || Dimple Bafna || Vaishali Salvi

Abstract: The purpose of this study is to improvise and enhance the existing methods for adoptionof eshopping in India. The intention behind this work is to offer a more comprehensiveunderstanding of online consumer behavior by identifying the compound effects of variousexternal behavioral beliefs, attitude, intentions and perceived risks, social influence, etc usingStructural Equation Modeling Approach. As part of the study a survey has been conducted and thedata obtained has been used as input for the integrated model. The data has been entered in IBMSPSS and after preliminary processing the model is developed using IBM AMOS. StructuralEqationModeling is used to analyse the model..

53


Paper ID: 107 Title:Fog Computing and Its Comparative Study with Other Cloud Based Technologies


Divya Kumawat || Aruna Pavate || Suvarna Pansambal

Abstract: Cloud computing is having a significant impact on IT sectors as it provide economicalsolution for dynamically changing hardware & software related requirement of users but as theusers are moving towards hand held mobile devices having lesser computation capability, storageand power availability. There are different technologies available which solve the above givenproblem. This paper compares several emerging technologies for which cloud has formed thebasis. It also provides general overview and performs comparative study of this technology..

Paper ID: 108 Title:Comparative Analysis of Fine Based 1 Bit Full Adder for Different Logic Styles


Mahalaxmi Palinje

Abstract: Due to physical limitation on scaling and seriousness of the problem of SCE, leakagecurrent the need of low supply voltage is increasing with the scaling of the transistor.There is needfor some alternative to overcome the challenges. Multigate Devices are considered to be the mostattractive to succeed the planar MOSFET. Due to its double gate structure it offers innovativecircuit design styles. As addition is the most commonly used arithmetic operation in micro-electronic system and is one of the speed limiting elements. There are various full adder designshave been designed owing to its significance in many micro-electronic circuits. The developmentof adder in terms of efficient parameters such as speed and power consumption should be pursued.This paper concludes the impact of FinFET on design of 1-Bit full adder using differenttopologies. FinFET based 1-Bit full adder are developed..

54


Paper ID: 109 Title:Design And Development Of Virtual Instrumentation System For Disabledusing Labview


Amita Bhandari || Bhagyashree Koli || Komal Bhosle || Komal Bhosle || Shruti Yadav || Akanksha Bhargava

Abstract: In real life people faces several physiological problems so hospitals should haveimproved version of measurement system. Now a days personal computers are easily available inlow cost so that we can use this personal computer for the people who are suffering from this kindof physiological problem. This project is related to eye blinking which is helpful for the disabledpeople. There are many use of keyboard to operate computer to reduce this dependency handgesture is an alternative way. Hand gesture recognition system is an alternative way which isinterface and communicate to computer via person. This hand gesture system used for uneducatedpeople who can operate keyboard by various types of symbol. This symbol like one finger denotesone alphabet from keyboard after that get the output to check whether it is correct or not throughvia voice. All this can be done by using LabView. The main aim is using virtual instrumentationdesign on LabView helps disabled people..

Paper ID: 110 Title:Proposed System for Iota Based Prepaid Electric Billing Meter


Mukul Ramchandani || Siddharth Bellani || Aishwarya Aryamane || Shraddha Bhinge || Indu Dokare

Abstract: The curve for the demand for electricity in India has always been on the increasing sidewhile the curve for the supply has been on the decreasing side. This paper proposes an IoT basedprepaid electric billing meter with an objective to let the end user know his/her real timeconsumption of electricity. This will enable users to make a conscious effort to reduceconsumption. The end user can track his/her real time consumption of electricity on the webinterface with a unique login id and password. The end user can also recharge from the sameinterface. This real time awareness of consumption will also help end user to control his/herelectricity theft..

55


Paper ID: 111 Title:Thermal Analysis of Liquid Crystal Mixtures


Dr. Jyoti R. Amare

Abstract: The thermal behavior of mixtures formed by ferroelectric nanopowder, monomer, andnematic liquid crystal (LC) were investigated by Differential Scanning Calorimetry (DSC) andphase identified by Polarizing Microscopy (PMS). The DSC and PMS result clearly indicates thatsynthesized mixtures produced display liquid crystalline properties. The phase transitiontemperature (PTT) values obtained in DSC experiment are in line with the PMS observations.Investigation of thermal properties of mixture reveals that nematic range of synthesized mixtures isaffected in a ways that is dependent different in attached moieties to the chain length on both themixtures ratio and furthermore, the phase transition temperature values of ternary mixturesincreases with increasing heating rate..

Paper ID: 112 Title:Comparison of Hormonal Variations Using Mathematical Trivariate Normal Distribution under Placebo and Progesterone Treatments


Akanksha A. Desai || Poonam M. Deshpande

Abstract: The problem of generating Trivariate Normal Distributions from univariate ones isdrawing the attention of the reliability analyst. Amongst these approaches the characterisationapproach and the modelling approach are very appealing. Infact the characterisation approach is ofgreat interest to both theoreticians and applied workers. Here we have used a Trivariate NormalDistribution for application by extending univariate distribution through characterisation approach.In our application part we have considered post-menopausal women. We have concentrated on a24 hr profile of Melatonin, TSH , and GH under the treatment with Placebo and with Progesterone.In this respect we have developed a mathematical model which describes the purpose of thepresent study. The study investigates in post-menopausal women, the effects of a 24-hr profile ofprogesterone and placebo administration both on sleep architecture and on multiple hormonesprofile. The protocol allows us to explore the effects of the placebo and progesterone treatment oncombined effects of hormones.

56


Paper ID: 113 Title:Study of various phishing detection methods


Diksha Todankar || Sakshi Seth || Vidhika Jain || Prof.Reena Mahe

Abstract: Phishing websites are essential to determine as the world is moving towardsdigitalisation and all the major communication and transactions are carried out through variouswebsites. However, many reported methods include Blacklist, content based, non-content basedwhich use various algorithms to differentiate between legitimate and phishing sites. These methodsconsider various features. To name some are page rank, URL features, using blacklisted database,positioning of content in a website, domain name, etc. Given a URL the goal of differentiating it aslegitimate or phishing is quite challenging based on the reported methods as the attacker will trytheir best to deceive the user. Numerous techniques have been developed to detect it efficiently andthe purpose of this paper is to discuss these methods and their limitations.

Paper ID: 114 Title:Autovisionconveyorbeltmechanismusingscilab


SayliLad || SiddheshNaik || DevendrasinghJhala || AnjaliBagade || Dr.BhavinShah

Abstract:Inmanyindustrialapplications,automationofcolorbasedsortinginrawmaterialsistheneedofhourtooptimizeresourcesandsavetime.Theaimofthispaperistominimizethesubjectiveerrorsofvisualinspection.Thesystemisdevelopedforsortingoffoodmaterialsbasedonthresholdinginimageprocessing.Theimageoffoodmaterialwillbecapturedby aUSBCameraandimageprocessingwillbecarriedoutinSCILABsoftwareformoreaccurateresults.OncetheimageprocessingiscompletetheresultswillfurtherbedisplayedonthescreenandaccordingtotheresultobtainedtheMicrocontrollerwillcarryoutthesortingmechanism.Forsortingpurpose,weusethepushingmechanisminterfacedwiththeMicrocontrollercircuitry.Thispaperproposesthesystemforanautovisionfo odindustryusingSCILAB softwareforhigherspeedandaccuracy.

57


Paper ID: 115 Title:Analysis for Designing a Micro strip Patch Antenna at 2.4 GHz


Aishwarya Nemade || Priyanka Sale || Shubham Shinde || Apeksha Magar || Prof. Gauri Salunkhe

Abstract: Communication Plays an important role in the worldwide society nowadays andcommunication system are rapidly switching from wired to wireless. The antenna is one of theimportant elements of the wireless communication system. In this Paper, microstrip patch antennais used for wireless communications to provide high Bandwidth, Efficiency, and Gain. TheProposed of this paper is to design microstrip patch antenna at resonant frequency 2.4GHz.

Paper ID: 116 Title:Measurement &Verification off Voltage Optimization by Using Voltage Optimizer for Conserving Energy.


Tarang Chandresh Mehta

Abstract: Talking of Voltage Optimization, concerned topic of interest so far, has been related to aco-ordinate control & reduction of power. We receive power from an energy consumer to reducethe energy use with meeting the reactive power demand. Mostly in Japan, these units areessentially installed at commercial sites in between the raw main transformers & main low voltagedistribution board. Voltage optimizer is the device used for this purpose. The savings we achieve interms of energy by applying this technique is actually aggregation of the efficiency that isimproved which further leads to improvements in power quality problems.

58


Paper ID: 117 Title:Detection of Phishing Site Using Efficient Approach


Dhanashree Pawar || Dhanalakshmi Sherbhai || Akshata Shelar || Neha Singh

Abstract: Phishing is an online criminal act that occurs when a malicious webpage impersonatesas legitimate webpage so as to acquire sensitive information from the user. Phishing attackcontinues to pose a serious risk for web users and annoying threat within the field of electroniccommerce. This paper focuses on discerning the significant features that discriminate betweenlegitimate and phishing URLs. These features are then subjected to associative rule mining. Therules obtained are interpreted to emphasize the features that are more prevalent in phishing URLs.Analyzing the knowledge accessible on phishing URL and considering confidence as an indicator,the features like transport layer security, unavailability of the top level domain in the URL andkeyword within the path portion of the URL were found to be sensible indicators for phishingURL. In addition to this number of slashes in the URL, dot in the host portion of the URL andlength of the URL are also the key factors for phishing URL. The objective of the proposed systemis to provide efficient approach for the detection of phishing site..

Paper ID: 118 Title:Controlling Lights Using Bluetooth


Pradeep Giri || Hardik Dhanmeher || Ajay Shingade || Akshay Shelke || Prof. Dimple Bafna

Abstract: Bluetooth based Home Automation is no more in the beginning stage. HomeAutomation alludes to Controlling of electronic aplliancesin the house utilizing at least one expertsand any Communication medium like Bluetooth, RS232, Ethernet and so forth. Choice ofCommunication medium is very crucial when it comes to home Automation. Factors such asrange, security, data rate, cost and accessibility need to be considered whle choosing a medium.Nowdays Bluetooth is available in almost all the phones, making it perfect medium for wirelesscommunication between a mobile phone and central controller. This paper describes use ofblutooth communication to automate various appliancses in the house through a mobile phone.Any controller can be used for this purpose. In this paper, Aruduino UNO is used for its ease ofprogramming....

59


Paper ID: 119 Title:Simulation and Linear Stability Analysis of Mathematical Model for Bacterial Growth


Poonam M. Deshpande || Prajakta Patil || Akanksha Desai

Abstract: Linear Stability analysis plays a major role in understanding the efficiency ofmathematical models. The analytical methods and numerical methods can be used effectively tocompare the accuracy of the model. In this paper we will investigate the model using linearstability analysis. In particular we find equilibrium of the model, analyze the behaviour of thesystem in the vicinity of the equilibrium, and investigate the behaviour of the equilibrium whenparameter values change especially when it concerns stability properties. We will also investigatethe model numerically, that includes writing a MATLAB function that computes the right-handside of the dynamical equations given by Bacterial.......

Paper ID: 120 Title:Power Factor Improvement of LED by Using Buck-Boost Converter for Residential Load


Karuna Nikum || Prachi Khamitkar || Jyoti Panmand || Akanksha Mane || Namrata Jadhav || SupriyaAwasthi

Abstract: This paper presents Buck-Boost converter which operates in continuous conductionmode (CCM). The proposed methodology improves power factor (PF) by using buck boostconverter through pulse width modulation. To reduce the harmonics in Light Emitting Diode(LED), improved switching topology of DC to DC converter is proposed. This methodology hasbeen simulated in MATLAB for verifying results. The various parameters of LED based powerquality (PQ) has been evaluated. This proposed technology gives satisfactory results for PFimprovement.

60


Paper ID: 121 Title:Automated Parking System Using Web Application Sejal


Sejal D'mello || Prof. Ashmita Shetty || Bhavesh Yadav || Shraddha Shahane || Vidya Ugale

Abstract: As we know, now-a-days population has increased, it also caused to increase vehiclepopulation. So, more spaces are required to park our Vehicle. In this project we are introducing anew parking system called Automated parking system using Web Application. This System givesus efficiency to find vacant slots to park a vehicle in parking area. A user can book a slot usingmobile to park his vehicle. In short, this system helps us to save our time to find vacant place topark our vehicle. The application contains the data of all existing vehicles in parking area, thereserved park area, a vacant place to park vehicle etc. The proposed system is made up of a lesshuman dependent interaction. It helps user to find a parking slot using a short distance algorithm.In our project we use EM 18 module to sense RFID reader, RFID reader to know the status of ourparking system. i.e. which car is on which place in parking slot. This system also proposed ewalletmethod. This system also includes multilevel parking. We will get to know all these features inbrief in our paper..

Paper ID: 122 Title:Electric Vehicle Charging Station


Shreedhar Dawar || Tejas Zimal || Siddharth Bagul || Abhijeet Tambade || Sangeeta Jain

Abstract: Wireless charging of gadgets is one of the new emerging technologies in the world atthe moment. The most common methods used at the moment are wireless power transfer byinductive coupling and resonant coupling. Also, Electric Vehicle is the modern technology to helpreducing the fuel consumption. So, this paper is combining these two technologies to get rid of thecopper cables used for charging the batteries of the Electric Vehicles (EVs). A methodology andprinciple of operation are devised for wireless power transfer through resonant coupling, and afeasible design is modelled accordingly. The resonant coupling technique is used because of highefficiency and large amount of the energy transferred over a longer distance compared to inductivecoupling. Also, to indicate its versatility and range of applications, the power transferred will beused to charge a battery with the aid of additional circuitry

Paper ID: 123 Title:Changing Faces of Education System from Ancient India to Present

61


Digital Education in India


Dr.Ritu Sharma || Dr. P. N. Nemade

Abstract: This paper is going to throw light on the aspect how Digital Education system haschanged the way of teaching and learning from Ancient education system to the present Digitalway of education. The implementation of Hi-Tech technologies in education system is bridging thegap between the modern and old methods of teaching and learning. In Ancient India there wasdifferent education system-1. Gurukul education System, where pupils lives with their guru andhelp them in their daily chorus and Guru taught them about Spiritual, Religious and Vedas. InGurukul education system pupils belonging to different castes were educated. 2. Education inMedieval India: After the Islamic invasion of India education system has changed. The risinginfluence of Islam led to establish of Madrassa for Muslims and Vedic Schools for Hindus. 3.Education in Colonial Period: British stress on English (missionary) schools. The main aim of themissionaries was to convert the native Indian to Christianity. 4. Present education system: Soonafter independence in 1947, giving education to all was a priority.......

Paper ID: 124 Title:Integration of Solar and Wind Energy System for Hybrid Power Generation


Varad Bagwe || Abhijeet Thoke || Charchit Vatsa || Dibyanshu Pandey || Sangeeta Kotecha

Abstract: With the increased global warming concern it is becoming important to find analternative to conventional energy sources causing less pollution and leading to sustainable use ofavailable resources. This has encouraged renewable energy generation to become a leader inenergy sector but the main obstacle in its path is its cost effectiveness. This has motivated forcombining two or more renewable energy resources i.e. hybrid power generation. The paper dealswith the study and design of hybrid system of solar and wind energy for rural area's electrification.

62


Paper ID: 125 Title:Survey on - Smart City Development Using IOT


Nikita Patil || Shrish Nagraj || Ankita Patil || Sharvari Nagraj || Samiksha Khedekar

Abstract: IoT (Internet of Things) is the system of physical articles gadgets, vehicles, structuresand different things implanted with hardware, programming, sensors, and system network thatempowers these items to gather and trade information. The fast advancement of data innovation(IT) has presented a hyper associated society in which objects are associated with cell phones andthe Internet furthermore, speak with each other The web of things enables items to be detected andcontrolled remotely crosswise over existing system foundation. In this paper I have outlinedsubstantial IoT based administration models which are useful to scholarly also, modern world tocomprehend IoT business

Paper ID: 126 Title:Secured Tam Simulator


Geetesh Gadekar || Sarvesh Gadekar || Meghana Rahe || Prof. Renuka Nagpure

Abstract: Security of Money, Data etc. is most important in today's world. This project is based onSecurity of ATM. In this project we will simulate an ATM machine where dynamiccomputergenerated password is provided to user for every transaction. As soon as user entersaccount no, user must provide his/her finger print to ATM machine using a Biometrics Finger PrintScanner, if the finger print is validated properly, a new dynamic computer-generated password willbe sent to user on his/her mobile phone on the number which is registered at bank. Using that autogenerated password user will be able to login into the account. After completing transaction whenuser log's out of the account, the password will be automatically destroyed.This way we can have asecure ATM transaction every time...

63


Paper ID: 127 Title:Proactive Security Analysis in Network


Tanvi Kapdi || Priya Porwal

Abstract: With the advent of new technology and modernization today most of the organizationsopt for multilayer network architecture and heterogeneous server environments in order to fulfillthe organization's increasing demands. But the major concerns for those organizations are"security" and thus every organization should have a build in set of policies that must comply withthe goals and objectives of the organization. To meet up with these goals and objectives theoptimal solution is through penetration testing. The process of penetration testing involves anactive analysis of the system for any potential vulnerability. This analysis is carried out byconsidering oneself as the active attacker and exploiting the security of the system. Effectivepenetration test will couple this information with an accurate assessment of potential impacts tothe organization and outline a range of technical and procedural countermeasures to mitigate therisk. Though being such an exclusive approach still there are certain technical problems in thecurrent penetration testing system which needs a detailed study of the penetration testmethodology to overcome the challenges faced by the information security industry..

Paper ID: 128 Title:Hyper loop: Transportation Redefined


Aditya Kale || Chinmay Bane || Aniruddha Dhurde || Akanksha Wala || Pragya Jain

Abstract: We live in a fast paced world. Cities are the spine of the economy. Transportation facilitates this growth, and it will continue to do so for the foreseeable future. Contrary to the need of the hour, existing transport technologies are slow, expensive or a combination of both. An innovation such as The Hyperloop presents itself as a solution to this. The Hyperloop is a proposedsystem of transport that would see pods or capsules travel at high speeds through a tube that has been conditioned into near-vacuum. The capsules would levitate using air bearings, similar to how pucks travel across an air hockey table. With so little friction in the tunnel, the pods would be able to travel at massive speeds projected up to 1200 kmph. The pod would initially launch using a linear induction motor before levitation takes place and the pod will then glide at immense speeds in the low-pressure environment.

64


Paper ID: 129 Title:Study of Ism Band Technologies


Sejal D'mello || Reena Somani || Vaishali Salvi || Rovina Dbritto || Pranoti Nage

Abstract: The ISM band is a general purpose part of the radio spectrum that can be used without alicense. The only requirement for developing products in the ISM band is compliance with rulesgoverning this part of the frequency spectrum. These rules vary from country to country. In theUnited States, the FCC defines these rules, while ETSI is the governing body in Europe. Mostlyused ISM bands are the 2.4GHz band and the sub-1GHz bands. Because of the cluttering in the2.4GHz bands, some activities have been seen in the 5GHz band, but they remain very limitedbecause of achievable range concerns. The last few years have witnessed the emergence of severalwireless standards operating in the ISM band. These standards along with proprietary solutionsprovide huge opportunities for developing a wide range of wireless products. These standardsdiffer from one another by their data rates, communication ranges, application domains and themodulation techniques used. This article presents an overview of popular ISM bands in differentregions of the world. Furthermore, analysis of some most prominent wireless standards availabletoday like Bluetooth, Wi-Fi, Zigbee and IEEE 802.15.4 is given.

Paper ID: 130 Title:Software Testing Strategies and Techniques


Reena Somani || Sejal D'mello || Vaishali Salvi || Rovina Dibritto || Pranoti Nage

Abstract: Software testing is very important to reduce the errors, maintenanceand overall software costs. One of the major problems in software testing ishow to know a suitable set of test cases to test a software system. We identify a number of concepts that every software engineering faculty and student should have learned. This paper describes Software testing, needfor software testing, Software testing goals and principles. Further it describeabout different Software testing strategies and different software testing techniques. Finally it describes the difference between software testing anddebugging.

65


Paper ID: 131 Title:Four Quadrant Dc Motor Drive


Rajeev Valunjkar || Ketan Teke || Shreyas Vasoliya || Akash Ubale || Vaibhav Dabholkar

Abstract: DC motor drives are used drastically in adjustable pace drives and function manageprograms. This paper proposes a way to govern the rate and route control of a DC motor with thehelp of a 4 quadrant DC-DC chopper. The speed under the base velocity may be controlled by wayof armature voltage manage technique. MOSFETs are used for the switching operation of thechopper. The gates of those MOSFETs are given PWM which affords the 4 quadrant operation.This PWM (Pulse Width Modulation) is generated through programming. of microcontroller theuse of embedded c program language period.

Paper ID: 132 Title:Power Consumption Monitoring and Home Automation using iot


Anket Narkar || Karan Kunnumal || Sagar Kanteliya || Suvarna More || Vikrant More

Abstract: The idea of smart power monitoring using IoT and Arduino have been introduced. Weare using Arduino because it is energy efficient i.e. it consume less power, it is fastest and has twoUARTS. IOT based power saving and consumption using wifi module is a network path in order tocommunicate, exchange data or control each other.Monitoring and keeping tracking of yourelectricity consumption for verification is a tedious task today since you need to go to meterreading room and take down readings.AIM for the planning of a system which will minimizeenergy waste in home environments with efficiency managing devices operation modes. The useof Wi-Fi module provides a feature of notification through internet. One can easily access themonitoring through web page that we designed. Current reading can be seen on web. AutomaticON & OFF of appliances is possible. Threshold value setting and sending of notification is theadditional task..

66


Paper ID: 133 Title:Resonant Converter Based Wireless Power Transmission


Ishani Engineer || Shruti Jadhav || Vijetha Jogu || Pooja Sawant || Pragya Jain

Abstract: This paper presents a wireless transmission system aimed to provide electrical utilitypower to electrical appliances wirelessly. The proposed operation involves, converting utilitypower into high-frequency power signal using resonant converters. This power is transmitted toreceiving side using an antenna, the load being DC load..

Paper ID: 134 Title:Speed Control of DC Motor Using Soft Starter: A Review


Saurav Shama || Vivek Ghadge || Salman Aejaz || Pragya Jain || Priyanka Sharma

Abstract: DC motor has variety of industrial applications which have variable speed and load characteristics due to its ease of control. The speed control can be achieved in many different wayssuch as, Field Control, Armature voltage control, Armature resistance control. The traditional method of speed control has many drawbacks such as, mechanical losses, switching losses. To minimize such losses new and advanced technique is being used. This paper will be focusing on a simplified techniques of speed control by use of Soft Starter. The technique to achieve soft startingis by use of Pulse Width Modulation, Firing Angle method, PID controller, Chopper control, Fuzzylogic. These methods are widely used because of their high efficiency and they can be implemented with any type of dc motor.

67


Paper ID: 135 Title:Theft Detection using Machine Learning


Ajay Kushwaha || Ankita Mishra || Komal Kamble || Rutuja Janbhare || Prof. Amruta Pokhare

Abstract: Theft is increasing day by day and it has become one of the never ending problem in theworld. Since, there are several detecting devices which are already available in the market today,but these devices had no provision to automatically detect theft attempts by alarming the owner. Tosolve this problem, Camera footage based theft detection will be used with the help of machinelearning to detect theft occurrence. System will detect the motion with the help of convolutionneural networks and an alert message will be sent to the owner along with captured image andoptions such as neglect, call the police or fire brigade..

Paper ID: 136 Title:Hybrid Power Generation


Rahul Vichare || Sanket Vaze || Shubham Raut || Vinit Tagarse || Suvarna More

Abstract: Energy today, is the need of 21st century. The renewable energy resources therefore areused in tremendous amount as they are easily available and cost free. But these energies instandalone forms have disadvantages such as unpredictability, availability in all time etc. whichcan be overcome by hybrid energy systems. They are basically consists of combinations of numberof renewable energy resources. They provide efficient response against voltage and frequencyfluctuations, harmonic measures and power issues in standalone systems. Hybrid power systemprovide reduction in complexity, maintain lowest unit cost, energy fluctuations due to DPSP(deficiency of power supply probability), with the help of proper design, advanced fast response,good optimization and control feasibility. There are various research has been done andcontinuously achieve new technologies and idea in this system. The paper report will discuss thedifferent system to organize the generation of renewable sources.

68


Paper ID: 137 Title:Web App Based Interactive Library Management System


Tushar Gawhale || Hemangee Joshi || Sayali Ramane || Sonali Yewale || Prof. Reena Somani

Abstract: As the number of documents in digital library grows, it becomes increasingly difficultto store, manage the large amount of documents and find requested relevant documents by users. AWeb App based Library management System helps to create unlimited quantity of digitalinformation and make it available to the world in parallel. The scope of this software application isto generate the automatic process of manual handling of Library records and to handle the stock aswell as book issues related information. Maintaining records of application for estates, the annualsystem is too complex and cumbersome. Since time and resources available we have beenproposed to develop an inventory system. The development platform and software tool wereidentified as Visual Studio 17 and access of database..

Paper ID: 138 Title:Alumni Tracking System


MihirJayavant || Shashank Kawle || PritiKhergamkar || ShitalGurale || Prof. Reena Somani

Abstract: Aluni Tracking System is an online-based application that helps to enhance the trackingof college graduates. The project primarily aims to replace current tracking procedure of collegegraduates and providing alumni data to college faculties. It aims at developing a mobileapplication and web portal which will be useful for the college to monitor the alumni's and for thealumni to update their current status and get notified about the college activities. ASP.NET CoreWeb API will be used to provide back-end service

69


Paper ID: 139 Title:Intelligent Safety Helmet System


Mansi Patil || Roshni Mudradi || Komal Kadam || Vineet Sharma || Ameya Jadhav

Abstract: This project is designed as the bikers in our country are increasing, the road mishaps arealso increasing day by day, due to which many casualties, most of them are caused due to mostcommon negligence of not wearing the helmets, and also many deaths occur due to lack of promptmedical attention needed by the injured person. This increase trend in accident motivated us tothink about making a system which ensures the safety of biker, by making it necessary to wearhelmet, as per government guidelines, also to get proper and prompt medical attention, aftermeeting with an accident. The proposed system is an intelligent helmet. A module affixed in thehelmet is such that, the module will synchronize with the module affixed on bike and will alsoensure and check that biker has not consumed alcohol. The accident detection module is anadditional feature which will be installed on the bike, which will be able to detect accident and willbe able to notify quickly the accident to police control room and in case if the accident is minor,rider can abort message sending by pressing the abort switch .The main objective of the smarthelmet is to provide safety for rider . This implement by using advance feature due to late medicalhelp or the accident place is unmanned.

Paper ID: 140 Title:Internet of Things in Education


Prof.Payal Varangaonkar || Prof.Dhanashree Pannase || Prof.Supriya Dicholkar || Prof.Payal Mohadikar || Prof.Deepthi Sekhar

Abstract: Today we found technology everywhere. It has changed the way we work.. The largeamount of data available on education and new technologies has made us to think how students aretaught and educational institutions . The way IoT in educational environments supports educatorscan influence how we as a society collaborate, communicate and operate. There are two aspects tolook into here, firstly how students are taught and finally how educational institutions can bring inIoT to improve system. Because of Internet of things in education we can easily coonect to thephysical world and environment. A smart school has the facilities to function smoothly thatprovides higher level of personalized learning. The smart devices that are used in the campus makeus to use Wi-Fi network to send data

70


Paper ID: 141 Title:Minimizing Penalty in Industrial Power Consumption by Engaging APFC Unit


Yash Shinge || Nikhil Shetty || Satyansh Tiwari || Pushpak Patil || Priyanka Tripathi

Abstract: In the industrial division, the numerous motoring loads are continuously running andgenerating the inductive load. Power consumption is increasing day by day at a very high rate. Sothe power factor in this operation gets lessened due to the inductive reactive power. The electricitycompany charges the penalty to the industrial consumers if the power factor goes below thespecified limit;. By using power capacitors the required compensation can be achieved toovercome inductive reactance with the help of APFC panel. The current transformer sends acurrent signal which is received by the microcontroller 8051 and simultaneously the signals are fedto the various contactors to connect the capacitors in the line. Thus due to addition of the capacitorto the line, it will help in compensating the reactive power and thus maintain the power factor nearto unity. This will avoid the penalty to the industrial consumers. In the conventional methods, wewere using the fixed capacitor for compensation. But these led to excessive charging of thecapacitors, which in turn caused the voltage surges. Thus it becomes complicated to maintainpower factor near unity by on and off operation of the fixed capacitor. The contactor switchedcapacitors are connected and disconnected automatically eliminating the previous predicament..

Paper ID: 142 Title:Solar Hybrid Inverter System Using PIC18 Microcontroller


Abhiraj Tawde || Rashmi Chaugule || Rohit Yadav || Pankaj Sabne || Rishabh Sawant

Abstract: It has become clear that the basic architecture of today's electricity grid, which revolvesaround the idea of a top down radial transmission system dependent on unidirectional electricalenergy flows from large centralized power plants, is obsolete, then aggregation platforms, such asthe hybrid inverter, will become vital. Solar Hybrid Inverter are modern, small-scale versions ofthe centralized electricity system, having specific local aims, such as reliability, carbon emissionreduction, diversification of energy sources, cost reduction ,and improved efficiency established bythe community of users being the beneficiaries. This paper presents an intelligent solar hybridinverter system that is installable in small or mostly rural localities and consists of sources likegrid power, solar power etc. By efficient use of sources the overall cost for the users can bereduced. Smart switching is done.

71


Paper ID: 143 Title:Numerical Protection Of Transformer


Namita Gawas || Darshna Jain || Soham Patil || Rudal Shengale || Rajeev Valunjkar || Priti Singh

Abstract: Single phase transformer are one of the most important equipment in power systemnetwork. The data acquisition, condition monitoring, automatic controlling are the importantissues. This paper describes the design and implementation of the micro controller-based systemfor protecting single phase transformer. The proposed system discriminates between internal faultand external faults, differential protection, over current protection, over voltage protection. In thispaper, software and hardware of micro controller based system have been explained and designed.The design implementation and testing of the system are also presented.

Paper ID: 144 Title:Border Surveillance Using Ip Camera


Gaurav Golatkar || Prathmesh Ambekar || Prashant Jadhav || Rohan Jadhav || Prajakta Borole

Abstract: Military people have huge risk on their lives while entering an unknown territory. ThisPaper demonstrates problem and effects of landmines in defense field.The proposing system isconsisting of a robot that will serve as an appropriate machine for the defense sector to reduce theloss of human life and will also prevent from illegal activities. The main objective behinddeveloping this robot is for the surveillance of human activities in the war field or border regionsin order to reduce infiltrations from the enemy side. It will help all the military people and armedforces to know the condition of territory before entering in it. The system is consisting of nightvision wireless camera, PIR sensor for human detection and mine detection unit which areinterfaced with Arduino Uno can transmit the information through NRF module..

72


Paper ID: 145 Title:Simulation Of Rectangular Waveguide In Ku Band For Varying Magnetic Field


Vinayak Kanade || Abhishek Kanerkar || Mayur Khatavkar || Yogesh Mergu

Abstract: Rectangular waveguide is a very promising structure for different applications. It hassome unique characteristics that allow for wide range of application including slow and fast light,meta-material, low loss energy transmission, and sensing. The resemblances and differencesbetween this waveguide configuration and metal-insulator-metal (MIM) are discussed in thispaper.A Description of the guided modes and their operating band is also given. We also studiedthe characteristics of the fundamental TM-like mode of this structure for the first time. Its potentialapplication in sensing and low loss energy transporting is also demonstrated. The effect of thedesign parameters on the performance of the rectangular waveguide is illustrated for differentapplication. Slow light and negative refraction effects using this waveguide design using TE-likemode is also demonstrated. Different designs are proposed using this structure for these differentapplications. Square shape design allow for polarization.

Paper ID: 146 Title:Smart Hospital Using Iot


Jinal Shah || Sahil Soni || Falguni Darji || Prof: Sumita Chandak || Prof: Ashmita Shetty

Abstract: The rapid development of Internet of things (IoT) technology makes it possible forconnecting various smart objects together through the Internet and providing more datainteroperability methods for application purpose. The use of IoT technology in applications hasspurred the increase of real-time data, which makes the information storage and accessing moredifficult and challenging. Most of the time, due to negligence of hospital staff, excessive numberof patients or inattentiveness of relatives some abnormality can go unnoticed which can result inpatient's health issues. Thus, in this paper we have proposed a system which include combinationof sensor technology and Internet of Things(IoT).Using this system one can monitor health of apatient, level of the saline bottle, heartbeat, blood pressure, temperature and control electricityfrom distant position.

73


Paper ID: 147 Title:Secure Storage For Ad Hoc Cloud


Vijay Singh || Nitin Yelwande || Swapnil Kokani || Dr. Mamta Meena

Abstract: The rapidly increasing growth of technology has seen the rise of technologies like cloudsystems among others. The use of these cloud systems enables people to back up their data andaccess it whenever needed. However, an internet connection is required. There are some instances,for mobile clients, where a continuous network connection is not available and in such cases thecloud cannot be accessed. We may make use of an ad hoc cloud system but the major issue withthese is the lack of security and lack of a centralized authority. In this paper, we will be analyzingthe SAS Cloud: ad hoc cloud for secure storage. The SAS (Storage as service) cloud provides acentralized authority for data storage even in network disconnected areas and provides a high levelof security. We will focus on simulating the various conditions and situations that may beencountered using a simulation software. The results can then be analyzed to see the feasibility ofsuch systems and their overall utility.

Paper ID: 148 Title:Iot Based IMU For Home Automation


Suveena Save || Vidhi Suvarna || Nikita Singh || Devednya Vyas || Samuel Jacob

Abstract: Infrared remote controls for controlling the home appliances and electronics gadgets arevery general. The complexity of buttons in these types of remote controls make its handling tough,they are not easy to understand and also to use. In this paper we propose an IOT based inertialmeasuring unit system for home automation which can provide an easy solution to this problemusing gestures in a remote control for handling home appliances..

74


Paper ID: 149 Title:Recent Issues Review In Project Management


Priyanka Tripathi || Suvarna More

Abstract: This paper examines project management research from the perspective of itsrelationship in the management field. Delays have been frequently reported as the cause of severalconflicts that affect the project. Project management now a day is regarded as a very high priorityas all companies or organizations. The development of project management has always been inparallel to the development of general trends in worldwide economics, research has substantialelements of creativity, innovation and predicting the outcome of research the analysis of projectmanagement disciplines reveals an explosion of popularity and strong interest in the last 50 yearsare i) strategy / portfolio management ii) operations research iii_ organizational behavior iv)information technology v) technology application / innovation vi) performance management vii)engineering and construction and viii) quality management / six sigma. Result of this study help usto better understand the evolution of project management as a in the field of practice and anacademic discipline and also us our suggestions for future project management researchopportunities.

Paper ID: 150 Title:Rivulet water treatment of western Mumbai by Coconut Charcoal


Dr.Bhushan Sonawane || Dr.P.N.Nemade

Abstract: Water scarcity is a critical problem throughout the world, so it is need to purify thewaste water .The sources of waste water are kitchen waste, Industrial waste, washing of differenttypes. By using certain important membranes that waste water can be purified and reused. Presentwork is based on easy method of coconut charcoal, which is made by simple heating and powderedform is used to filter water from different sources from western Mumbai. The important advantageis it purifies water, traps bacteria, pigments from waste water sample and that water used forgardening, for concrete work, for washing clothes or for street, railway Platform clearing..

75


Paper ID: 151 Title:Hybrid Approach For Securing Data


Amit Singh || Nayan Solanki || Prof. Foram Shah

Abstract: During data transmission over the internet, it is important to transfer data in highsecurity and high confidentiality, information security is the most important issue of datacommunication in networks and internet. To secure transferred information from intruders, it isimportant to convert information into the cryptic format. Different methods are used to ensure datasecurity and confidentiality during transmissions like Steganography and cryptography. Proposedwork improves information security through developing efficient compression of texts andencryption of texts by cryptography with steganography. The Proposed algorithm ensures theencryption and decryption using AES, compression and decompression by using LZW and RGBpixel shuffling with steganography. LSB method is used to insert data bits in LSB of RGB pixelsof the cover image. In this Multi-threading use to retrieve information from image rapidly. Henceproposed system can reduce the data transmission time and cost. These algorithms are performedby using JAVA program..

Paper ID: 152 Title:Bottle Sorting in Production Line


Niranjan More || Kalpesh Koli || Saifali Khan || Jatin Mangela

Abstract: The project is based on the field of Image Processing and mainly used in manufacturingplants and industries.It finds it extensive use in automation process due to its reliability, lack ofmanpower required.The main objective of this project is to highlight how Image Processing can beeffeciently used for Automation and Inspection without the need of human supervision.The mainconcept or element of this project is the ―VISUAL INSPECTION SYSTEM . The VIS is an‖important element which carries out the primary function of capturng the images of the productand inspecting it to determine if any fault is present.In presence of any fault the VIS will in formthe processing section to intercept and remove the bottle from the production line. The imageprocessing is done by the use of morphological operators and use of algorithms. The image isprocessed through MATLAB software

76


Paper ID: 153 Title:5 Stage, 50 V, 500 Hz, 50 μs MOSFET Based Design Of Unipolar Pulse Power Marx Generator


Ashish Sojitra || Hardik Rana || Sandesh Govari || Shubham More || Shreyashi De

Abstract: The Marx Generator is a multistage pulse generator which is a prime source forgeneration of high voltage pulse by connecting number of stage capacitors in parallel and series forcharging and discharging during ON and OFF period respectively. Marx Generator has wideapplications in various field with different characteristics of high voltage output pulse for differentrequirements. This paper deals with design and simulation in Multisim software of five stageUnipolar solid state Marx Generator having 50 V of output pulse with 10% voltage droop withrepetition frequency of 500 Hz and 50 μs maximum pulse width using MOSFET switch. Thediodes are used to charge the capacitor at each stage. A 555 timer generates control pulses for thecapacitors to charge in parallel during ON time. During OFF time of the pulses the capacitors arebrought in series with the help of MOSFET switches. Hence the simulation results confirms thevalidity of simple multistage Marx Generator topology to generate pulses....

Paper ID: 154 Title:Impedance Calculation Algorithm For Microprocessor Based DigitalProtective Relay


Neel Pawar || Saniya Vichare || Shikha Singh || Vedant Bhatkar || Rajeev Valunjkar

Abstract: Earlier, line relaying algorithms represented most of the activity in computer relaying.This paper presents an algorithm to calculate the impedance of a transmission line fault. Theimpedance is calculated using differential equation algorithm (DEA) from sampled data. DEA,which is a parameter estimation method, is model-based and is independent of any form of inputsignal (voltage/current). The intended algorithm requires 3 samples at successive intervals of time.In this, examination of differential equation algorithm is done and attempts are made to draw aconclusion about the characteristics of this algorithm. DEA is an alternative method to FourierTransform and similar algorithms and it shows that it can be used effectively in digital relays tofind the distance of a fault from the relaying point in a transmission line..

77


Paper ID: 155 Title:A Comparative Study of Data Migration Techniques


Ajeet Ghodeswar || Trupti Shah || Amruta Mhatre || Santosh Dodamani

Abstract: This Paper Gives The Overview Of The Data Migration And Its Basic Concepts. TheNeed For The Data Migration In Terms Of Business Needs, Different Environments And TheCriticality Of The Legacy Databases Are Discussed. The Data Migration Process GenerallyCarried Out In Three Steps: Plan, Migrate, And Validation. An Automated ETL (Extract-Transform-Load) Process/Tools Is Use To Move The Data From Source To Target Database. ETLIs The Process Of Data Cleaning, Transforming And Finally Loading It Into A New TargetDatabase. Existing Methodologies Like Line Of Code, Sampling Techniques And MINUS QueriesAre Briefly Discussed In The Paper. During The Process Of The Data Migration (DM), Too MuchData Is Extracted, Transformed, Structured, And Loaded (ETL) From Legacy/Source DatabaseInto A Newer Structure That Is The Target Database. This Process Leads To Various Types OfChanges In Data, Known As Data Inconsistencies /Quality Issues

Paper ID: 156 Title:RF Based Secure Coded Communication System


Aditya Shah || Shahbaz Shaikh || Divyesh Parmar || Sarang Kulkarni

Abstract: The project is designed to send secured messages by using an encryption from acomputer keyboard connected to the transmitting unit via RF technology. The message is retrievedat the receiver end only upon entering the secret code used by the transmitter. Thus, completesecrecy is maintained in this communication process. This system has a secret code attached to thetransmission. The message typed in by the user is transmitted to the receiving end through RFtransmitter. At the receiving end the RF receiver is integrated with a code and display system. Userat receiving end can only view the message if he enters the right code.

78


Paper ID: 157 Title:Software Configuration Management


Rovina D'britto || Pragyamani Sharma || Sejal D'mello || Reena Somani || Jyothi Arun

Abstract: While Building Any Software, Changes Happen Throughout The Software Process AndChanges Increases The Level Of Confusion Among The Software Engineers Who Are Working OnThat Project. Change Management, Also Known As Software Configuration Management Is A SetOf Activities Designed To Manage Change And Auditing And Reporting On The Changes Made.Everyone Involved In The Software Process Is Involved With Change Management. This Paper IsFor Anyone Who Will Have Recently Detected Regarding Change Management And Desires ToGrasp A Lot Of Regarding Software Configuration Management. During This Paper, WeDescribed Software Configuration Management, The SCM Process, Different Tools For SCM,Different Features Of SCM, And Elements Of Configuration Management System..

Paper ID: 158 Title:Emplacing Security Devices in a Cloud Network: Survey & Implementation


Rashika Abbi || Priyanka Paygude || Snehal Chaudhary || Sonali Idate

Abstract: Cloud Networking Is Extensively Used And Cloud Service Providers (Csps) DeployVarious Security Devices. In Our Work We Consider Only The Placement Of Security DevicesBetween Servers Is Defined Using Four Partition Patterns - Firewall, Ipsec, IDS And NAT – ToMeet The Security Needs In A Cost Effective Manner. This Paper, Presents An AutomatedFramework For Analyzing Data Centre Security Configurations. We Have Considered A DummyData Centre Topology, Requirements By CSP (Basically Connectivity And Isolation), BusinessConstraints As Inputs (Basically Usability And Cost Optimization) And Then Analyzes TheOptimal Data Centre Security. Henceforth, Determining The Emplacement Of Different SecurityDevices In The Data Centre..

79


Paper ID: 159 Title:Election Prediction Using Deep Learning and Opinion Mining


Smeet Rupapara || Saksham Tiwari || Manas Kore || Kunal Waval || Prof.Reena Mahe

Abstract: Election is a very popular word. As per definition, the term "election" means a formaland organized choice by vote of a person for a political office or other position. But the processand properties may vary for different sectors. There are different types of elections like GeneralElection (Lok Sabha), Rajya Sabha Election (Upper House), State Assembly Elections or LocalBody Elections. As election is very famous, same way election prediction is again not a newkeyword. It has same long life as election. But it is quite a challenging task to predict accurateresult. The use of opinion mining and deep learning in social science to evaluate the prediction isthe core part of this paper.

Paper ID: 160 Title:Defies, Prospects and Skills for Entrepreneurship in India


Priynka Sharma || Garima Gurjar || Pragya Jain || Priyanka Tripathi || Suvarna More

Abstract: Entrepreneurship Is The Use Of Knowledge And Skill To Create A New Venture. Entrepreneurship Significantly Contributes In The Economy Of Nation By Creating Wealth And Employment. India Has A Rich Tradition Of Entrepreneurship, Practiced In Diverse Ways. India Offers A Unique Hunting Environment For Business With Its Diversity And Vastness. Entrepreneurship Depends Upon Individual Motivations, Educational Opportunities, Financial Support, Supporting Infrastructure, Communication Support, Manpower And Political Stability. Entrepreneurship Also Deals With Empowering The Peoples Who Are Innovative And Ready To Explore Their Ideas To Help The Society. In This Paper We Are Analyzing All These Factors And Exploring All The Possible Opportunities Of Entrepreneurship In India. Huge No Of Population InIndia, Low Cost Of Establishing A Company, Vibrant Ecosystem And Huge No Of Peoples Below Poverty Line Gives An Excellent Opportunities For Stakeholders For Investment

80


Paper ID: 161 Title:Iot Based Air and Sound Pollution Supervising System


Dhruvil Shah || Prathmesh Kudale || Prasad Shirwadkar || Samuel Jacob

Abstract: In The Present Aeon, Noise And Air Contamination Is The Amplifying Perilous Issue. ItIs Essential To Surveil Air Quality And Retain It Under Sway For A Healthy Lifestyle AndDesirable Future For All. Here We Present A Sound Contamination As Well As An Air QualityTracking System That Allows Us To Surveil And Check Live Air Quality As Well As SoundAdulteration In Specific Areas Through Iot. The System Uses Air Sensors To Perceive TheExistence Of Hazardous Gases/Compounds In The Air And Constantly Impart This Data To TheCloud. Also, The System Keeps Measuring Sound Level And Reports It To The Online ServerOver Iot. The Sensors Gets Involved With A Micro-Controller Which Processes This Data AndTransmits It Over The Internet. This Allows Prerogative To Track Air Pollution In Different PlacesAnd Takes Action Against It. Also, Prerogative Can Keep A Watch On The Noise Pollution NearSchools, Hospitals And No Honking Areas, And If The System Perceive Air Quality And NoiseIssues It Notify Prerogative So They Can Take Measures To Control The Issue....

Paper ID: 162 Title:Intelligent Process Automation:The Next Generation Operating Model


Nishad Akash || PadhyAmit || Shah Parth || Shetty Pravira || Prof. JyotiKolap

Abstract: FourthIndustrialRevolution ,thegenerator of the smart factoriesis the current trend forautomation and data exchange in technologieswhichincludeIoT, cyber physicalsystems,cloudcomputing and cognitive computing.This paperfocuses on the cognitive processingofdifferentindustrialprocesses.Over the whichrequiredhuman supervision and manual assistancewhichthengraduallyupdated to RPA thatisRoboticProcess automationwithlesshuman assistance andlowcomplexity.Now the industry has been developedwith the Intelligence ProcessAutomation(Artificial Intelligence)beingbetterthan the RDARobotic Desktop Automation and RPAsinceit has large learningdata sets and whichsimulates the humanwork force withautomatedrobotsyears automationindustry have developed in the market.Startingfrom the RDA,whichismonitoredthrough consoles..

81


Paper ID: 163 Title:Efficient Use of SDN in LTE for Better Cellular Traffic Control


Prof. Nilesh R. Gode || Dr. Bhavin Shah || Prof. Mohan Kumar

Abstract: This paper give detail study of the relationship between Software-Defined Networking(SDN) and Autonomic Network Management (ANM) under the prism of Long Term Evolution(LTE) Self-Organizing Networks (SONs). A complete revolution of mobile networks foraccommodating over-growing demands of users, services and application. LTE Technologies alsoadopted much complex management requirements based on the softwarization of networkresources. This will require a real time management based system on a hierarchy of complexdecision making techniques that analyses historical, temporal and frequency network data. In thispaper we discuss to solve the problem of wasting of network resources, SDN is considered as oneof the best approaches. SDN traffic engineering gives the immense solution to enhance thenetwork performance at both traffic and resource levels. Being the centralized authority SDN isable to give better results in network load balancing and improve delay.....

Paper ID: 164 Title:Design of a Mini Robot Using Iot Through Ipv6 End To End Connectivity & High-Level System Design Using Wireless Sensor Networks


Dr. Bhavin Shah || Prof. Nilesh Gode || Prof. Mohan Kumar

Abstract: The Proposed Paper Presents A Mini Robot Using Iot Through IPV6 End To EndConnectivity, Assembled From Low-Cost Hardware Parts, And Open-Source Software BuildingBlocks. These Building Blocks Provide A Reusable & Extensible Base For Emerging ApplicationsMixing Robotics With The Internet Of Things And High-Level System Design Using WirelessSensor Networks & Programming For Handling Traffic Using NS2.

82


Paper ID: 165 Title:Smart Home


Jha Abhay || Mihir Kothari

Abstract: the paper is about the smart home concept. We discussed in this paper the definition ofsmart home, who it works, need, current technology, challenge and advantage, disadvantage andfuture development in this field .we also listed same big smart home project which is underresearch and developments in different countries and companies..

Paper ID: 166 Title:Smart Attendance System Using Radio Frequency Identification (RFID) And Android


Bhushan Y. Shejwal || Akash H. Walke || Rahul M. Solanki || Aditya Pandit || Prof. Yogita M. Shelar

Abstract: Attendance system is a system that is used to track the attendance of a particular personand is applied in the industries, schools, universities or working places. The traditional way fortaking attendance has a drawback, which is the data of the attendance list cannot be reused andtracking and tracing student's attendance is harder. The technology-based attendance system suchas Radio Frequency Identification (RFID) and Near Field Communication (NFC) technologybased attendance system reduce human involvement and errors. Thus in this paper, we areemphasizing on developing this project that will help the lecturers to take attendance easily,securely and less prone to error and proxies. For this, we are implementing software based onAndroid Technology. A comparative study of both the RFID and NFC is also discussed thoroughly,especially in terms of their architectures, functionalities.......

83


Paper ID: 167 Title:Transformer Monitoring and Control Using Iot


Deepraj Duttachowdhury || Vivek Patil || Arya Parab || Raj Patel || Karuna Nikum

Abstract: Distribution Transformers Is One Of The Most Important Element Of Electrical PowerSystem.Transformer Is A Device Which Is Continuously Working In Order To Improve TheEfficiency Of The Transmission System.The Present Paper Proposes Continuous OnlineMonitoring Of Distribution Transformer Using IOT(Internet Of Things). The Internet Of ThingsConnects The Unconnected Things.Previously The Things That Weren't Accessible Have BeenMade Accessible Because Of It.The Transformer Is Subjected To Various Faults Such As Over-Voltage,Over-Current,Increase In Temperature,Oil-Level,Humidity Etc.All These Faults ArePersistently Monitored Throughout By The Arduino Which Regularly Sends The HealthInformation Of The Transformer Via The Wifi Module.This Data Can Be Accessed FromAnywhere In The World By A Android Application.So The Maintainence Of The DistributionTransformer Can Be Successfully Implemented By The Use Of This Project Ideology.

Paper ID: 168 Title:Estimating SINR In A Millimeter-Wave Propagation


Prof.Jyoti Dange || Dr. R.P. Singh || Dr.Vikas Gupta

Abstract: A New Edge For Cellular Communication Is Defined By Millimeter-Wave (Mmw)WithFre- Quencies Between 30 And 300 Ghz To Offers The Assurance In Orders Of Magnitude GreaterBandwidths Which Is Combined With Further Gains Via Beam Forming And Spatial MultiplexingFrom Multielement Antenna Ar-Rays. To Brought A Focus On Small Cell Deployments In UrbanEnvironments Special Studies Is Made On Sur-Veys Of Measurements And Capacity. On TheBasis Of Statistical Model Obtain From Demonstratation Of 28 And 73 Ghz In An UrbanEnvironment It Is Proved That Mmw Systems Can Present Extra Than An Order Of Magni-TudeAdd To In Capacity Over Current State-Of-The-Art 4G Cellular Networks At Current CellDensities. Cellular Systems, However, Will Need To Be Significantly Recontruct To Fully RealizeThese Gains. The Requirement Of Highly Directional And Adaptive Transmissions, DirectionalIsolation Between Links, And Significant Possibilities Of Outage Have Strong Implications OnMultiple Access Channel Structure, Synchronization.........

84


Paper ID: 169 Title:Automated Neural Image Caption Generator for Visually Impaired People


Yash Badani || Gunjan Bagayatkar || Sandesh Bhat || Sanket Benke || Prof. Sonali Jadhav

Abstract: Automated Neural Image Caption Generator Can Generate The Content Of An ImageUsing Well- Formed Meaningful English Sentences. Image Is Continuously Captured Real-TimeUsing User's Camera/Mobile Phone. Our Models Use A Convolutional Neural Network (CNN) ToExtract Features From An Image. These Features Are Given To A Recurrent Neural Network(RNN) Or A Long Short-Term Memory (LSTM) Network To Generate A Valid Image DescriptionIn English. To Extract Features From The Image, We Use A CNN. Cnns Have Been Used AndStudied For Variety Of Image Tasks, And Are Currently State-Of-The- Art Methods For ObjectRecognition And Detection. Concretely, For All Input Images, We Extract Features From The Fc7Layer Of The VGG-16 Network Pre-Trained On Imagenet, Which Is Well Tuned For ObjectDetection. After Obtaining A 4096-Dimensional Image Feature Vector, We Reduce It UsingPrincipal Component Analysis (PCA) To A 512-Dimensional Image Feature Vector Because OfComputational Constraints In LSTM. We Feed These Features Into LSTM Network To Generate ADescription Of The Image In Valid English, Which Could Then Converted To Audio Using Text-To-Speech Technology.

Paper ID: 170 Title:Computation of various optical properties of a Single Nanowire withup to two shell layers using Mie-Formalism


Ms.Jyoti Mali || Dr.Omprakash

Abstract: In this paper we tried to compute the optical properties of a single nanowire using theMie- Formalisim methodology on the nanohub open source tool availability. The current version ofthe tool is limited to only up to two shells and has pre-chosen materials options. Here the totaloptical properties such as total scattering, absorption and extinction efficiency are computed.Absorption efficiency of individual layers can also be calculated and studied using the samemethod. The integrated photon flux absorbed and the ideal photocurrent density under AM 1.5 Gillumination as a function of layer thickness is used. Different electric and magnetic polarizabilityunder the TE polarization of the E field perpendicular to nanowire axis is computed to study thevarious optical properties of a single nanowire with two shell layer.The simulations are based onrigorous solutions to the Maxwell's equations using Mie-formalism. Overall absorption as well asproperties within each layer can be calculated for given thicknesses of each layer for the CMS(Core multi shell) NW (Nanowires) structures.

85


Paper ID: 171 Title:Fuzzy Logic Based DC –DC Converter: A Review


Garima Gurjar || Priynka Sharma || Sangeeta Jain || Rashmi Chaugle || Shreyashi De

Abstract: In This Paper Reviewd Différent Approach For DC-DC Converter Fuzzy Logic BasedApproach Is Used For DC-DC Converters. Design Of Fuzzy Controllers Is Based On HeuristicKnowledge Of Converter Behavior, And Tuning Requires Some Expertise To MinimizeUnproductive Trial And Error. The Design Of PID Control Is Based On The Frequency ResponseOf The Dc–Dc Converter. . The Fuzzy Logic Controller Has Been Implemented To The System ByDeveloping Fuzzy Logic Control Algorithm. The Design And Calculation Of The ComponentsEspecially For The Inductor Has Been Done To Ensure The Converter Operates In ContinuousConduction Mode. The Design Of A Fuzzy Logic Controller Using Voltage Output As FeedbackFor Significantly Improving The Dynamic Performance Of Boost Dc-Dc Converter By UsingMATLA On Simulink Software.

Paper ID: 172 Title:Human Gait Recognition


Priti Rumao || Damini Tembhurne || Gaurav Shetty || Amey Zagade

Abstract: CTo Compare Various Appearance-Based Approaches In The Terms Of TheRecognition Rate, For A Walking Gait Of A Human, Is Proposed In This Paper. The First StepComprises Of Obtaining Binary Silhouettes From A Video Sequence Of A Human Using VariousMorphological Image Processing Techniques And A Relevant Gait Energy Image (GEI) IsCaptured. Utilizing The Fact That The Frequency-Domain Information Of Gait Is Unique To EachHuman, Discrete Cosine Transform (DCT) Is Used For Feature Extraction. Further, FeaturesObtained From DCT Are Mapped Onto Vector Space By Applying Linear Discriminant Analysis(LDA) And Principal Component Analysis (PCA) Independently For Feature Reduction. ToIdentify A Human Corresponding To His/Her Gait, Euclidean Distance Is Measured In Each Case.Results Obtained After Applying LDA And PCA Are Compared. Alternatively, Another ApproachConsists Of An Object (Human) Detection From........

86


Paper ID: 173 Title:Casper- The Intelligent Software


Amrata Joshi || Aneri Chandura || Chanda Chauhan

Abstract: Casper-The Intelligent Software, Implements The Basics Of Artificial Intelligence AndImage Processing, To Facilitate The Function To Provide Identification Of An Object In Focus OfThe Device. The Run-Time Application Is Swift Enough To Avoid Load On The Device. DeepLearning Algorithms Are A Subset Of The Machine Learning Algorithms, Which Aim AtDiscovering Multiple Levels Of Distributed Representations. Recently, Numerous Deep LearningAlgorithms Have Been Proposed To Solve Traditional Artificial Intelligence Problems. This WorkAims To Review The State-Of-The-Art In Deep Learning Algorithms In Computer Vision ByHighlighting The Contributions And Challenges From Recent Research Papers. It First Gives AnOverview Of Various Deep Learning Approaches And Their Recent Developments, And ThenBriefly Describes Their Applications......

Paper ID: 174 Title:The Substation Automation through Smart Grid


Prof.Dhanashree Pannase || Prof.Payal Varangaonkar || Prof.Meenal Pannase || Prof.Rucha Jichkar || Prof. Preeti.R.Lawhale

Abstract: Substitution Automation (SA) Can Give Essential Capacities To The DisseminationOrganize Mechanization. SA Has Been Centered Around Robotization Capacities, For Example,Observing, Controlling, And Gathering Information Inside The Substation. This Restricted DegreeTakes Into Consideration Successful Control Of Programmed Gadgets Situated Inside TheSubstation Fence. Substation Automation Is Relied Upon To Extend With Expanded Control OfTransfers, Capacitor Banks, And Voltage Controllers Along The Feeders. This Paper Gives ACutting Edge Investigation On Models, Advances, Applications, Data Norms And CorrespondenceProtocols. It For The Most Part Centers Around Substation Robotization In The Transmission AndDissemination Area. From The Investigation It Is Seen That There Are Gigantic Endeavors TakenBy The Smart Grid Key Partners To Enhance Interoperability Over The Different SegmentsRunning An Electrical Matrix, From Field Procedures To Advertise Trades, Permitting The StreamOf Data More Unreservedly Crosswise Over Applications And Areas And Making Open Door ForNew Applications Which Are Relevant Various Space.

87


Paper ID: 175 Title:Underwater Pick and Place Arm


Rahul Sogam || Shubham Rane || Amruta Mhatre || Shubham Vengurlekar

Abstract: The design analysis of Underwater Remote Controlled "Pick and Place" RoboticVehicle has been presented in this paper. This Remotely operated vehicles (ROV) helpoceanographers study parts of the ocean that are too dark, too cold, or too deep for human divers.Build a real underwater ROV, and take a video showing how you control it while it's underneathwater. We are trying to make a mechanical arm with all its basic applications which can be alsouseful underwater that is we can search, locate, and pick or place it on another location underwater.This arm will able to pick and place object which cannot handled or not accessible to human bodywhich are beneath the water, as it is underwater the arm and its other parts will be fully waterproof.

Paper ID: 176 Title:IOT Based Smart Parking System


Apeksha P. Bari || Manali A. Parab || Amey U. Kokate || Nida Parkar

Abstract: Now a days the concept of smart cities have gained grate popularity. Thanks to theevolution of Internet of things the idea of smart city now seems to be achievable. Major efforts arebeing made in the field of IOT in order to maximize the productivity and reliability of urban areas.Problems such as, traffic congestion, limited car parking facilities and road safety are beingaddressed by IOT. In this paper, we present an IOT based Server integrated smart parking system.This system consists of an IOT module which check the state of availability of parking lot. Amobile application is also provided that allows an end user to check the availability of parkingspace and book a parking slot accordingly. The paper also describes a high-level view of thesystem architecture. Towards the end, the paper discusses the working of the system in form of ause case that proves the correctness of the proposed model

88


Paper ID: 177 Title:Obstacles to the Success of NFC To Non NFC Ticketing System WithImprove NDEF Technology


Amruta Mhatre || Anup Maurya

Abstract: Unique The NFC Data Exchange Format (NDEF) is an institutionalized configurationfor the putting away arranged information on NFC (Near Field Communication) labels and fortransporting information over a shared NFC interface. The NDEF and its different record writesThe occasions can be activated on a NFC gadget by just touching a NFC-empowered object.Thenumber of utilization cases and genuine applications around NFC and NDEF innovationincrements ceaselessly. In this manner the NFC Forum - which is in charge of the detail ofinformation organizations, conventions and applications as to the NFC innovation - is taking a shotat adding advanced marks to The their NDEF arrange. While the motivation behind letter recordwrite is still in draft status and has not been discharged to the general population this paper talksabout the different parts of carefully marking NDEF records

Paper ID: 178 Title:Bridging The I.T.Industry And Academia Curriculum Gap


Sandesh Borade || Priya Borade

Abstract: This paper focuses on current industry demands, gaps between the industry demandsand university curriculum and how to bridge those gaps by coordination of universities andinformation technology industries. AS effect of increase in gap there is people of not gettingdesired jobs, expected packages, drop in percentages of campus recruitment and most importantlythe increase in gap period between getting job and candidate degree pass out leads to get moraldown of students, failure of colleges/universities and frustrations to Information technologyindustry for not getting required number of resources and affecting the growth which ultimatelyleads industry to think of relocate to other location or opening of new offices at other locations.This paper will put focus on bridging the gap between university curriculum and industry demand

89


Paper ID: 179 Title:Remote Administration Software


Advaita Kharat || Prof. Dishabhosle

Abstract: Remote monitoring and control (M&C) systems are designed to control large orcomplex facilities such as factories, power plants, network operations centers, airports, andspacecraft, with some degree of automation. This software aims at providing High Performanceadministration system. A sincere effort is made to design and deploy these application software sothat anybody who is computer literate can access it and operate with ease and make benefitthrough it.This project is developed to provide remote network auditing function.

Paper ID: 180 Title:Camera Based Product Identification Android Application For BlindPeople


Ashwini Desai || Prianka Mestry || Divyesh Parab || Prof.Santosh Dodamani

Abstract: We propose camera based Product identification android application for Blind people.These days every Commercial business may it be a small pin to large products, business cards toWebpages uses Barcodes or QR codes. So we take these developments in technology to helpvisually impaired people to identify a product using barcode Scanners and Text to Speech. Theuser opens the app, which in turn opens the camera and ready to scan the barcode, one it finds itwill read all the details of the product like Name, description, cost, expiry date etc.

90


Paper ID: 181 Title:Fingerprint Authentication System


Juilee Shelar || Meghana Vengurlekar || Akash Jogi || Gaurav Kamat || Disha Bhosle

Abstract: The proposed system is smart document tracker. The document can either be a hardcopy of the document or soft copy. The system deals with the hard copy of documents. Althoughnowadays all work is computerized but then too massive amount of previous data is in the systemof hard copy. Users don't want to lose a track of the data. Further, elaborating on the title. Thissystem is smart because of its unique feature of detecting whether that clip attached to file containany paper in it or not? Now comes tracker. Tracker means the system is going to track that filecontaining document wirelessly. An accelerometer and a BLE module will work as a tracker andwill provide the user with necessary information. This advanced system will help many asmismanagement and misplacing of documents is one big issue in big companies, banks etc.

Paper ID: 182 Title:Fingerprint Authentication System


Ajit Yadav || Chandan Maurya || Endreshkumar Nayak || Sarvesh Yadav

Abstract: Fingerprint authentication is one of the safest and the easiest method as compared toother biometric authentication system. In this reprt, we have present the use of fingerprint towardsthe security. Fingerprint authentication provides an alternative and easiest approach to the exisitingmethod of providing the security for the log-in purpose.

91


Paper ID: 183 Title:Bus Tracking System


Vidhi Patel || Amruta Mhatre || Shubham Rane || Shubham Vengurlekar

Abstract: The inconvenience caused because of the lack of management of public transportservices is one of the main reason that general public is not using bus services in order to reducethis inconvenienceand in order to make the commuters more informed about the ongoing serviceswe have implemented this project. In this project commuters will be able to locate the exactlocation of the desired bus using GPS and geolocation technology. By locating their respectivebus, the commuters will not have to wait unnecessarily at the bus stop. Commuters would beinformed about the various details of the arriving buses using an android application so that thebus system could function in an orderly manner. In this paper we propose a system wherein weprovide an application that would enhance the system and will provide an extra layer oftransparency to it.

Paper ID: 184 Title:Connecting IOT with diffrent wireless technologies


Akanksha Bhargava || Jyoti Dange || Jyoti Kolap || Gauri salunkhe || Tanu Sharma

Abstract: In the rapidly growing Internet of Things (IoT), applications from personal electronicsto industrial machines and sensors connect wirelessly to the internet. Covering a wide range of usecases in various environments and serving different requirements, no single wireless standard caneffectively overcome. The Internet of things (IoT) is the network of physical devices, vehicles,home appliances and other items embedded with electronics, software, sensors, actuators, andconnectivity which enables these objects to attach and exchange data. Each thing is exclusivelyparticular through its embedded computing system but is capable to inter-operate within theaccessible Internet infrastructure.

92


Paper ID: 185 Title:Credit Risk Analysis


Harshala Yadav || Hemani Yadav || Divya Kumawat

Abstract: Nowadays There Is Huge Data That Is Being Used By Organizations And It Is RequiredTo Extract Important Patterns And Information From The Database That Is Useful. For ThisPurpose Data Mining Techniques Is Used. Decision Tree Is Very Popular For ClassificationPurpose In Data Mining. As We Know In Banking Sector Huge Databases Are Used For CreditRisk Assessment .Credit Risk Is Any Loss That Can Be Incurred Due To Debt DefaultersEncountered. For This Purpose Data Mining Techniques Like Decision Tree Is Very Efficient ForPrediction Of Defaulters Which Will Lower The Risk Associated With Lending Loans

Paper ID: 186 Title:Crime Reporting Portal


Chandresh Narayan Dewedi || Sarthak Pandita || Snehal Chaudhary || Priyanka Paygude || Sonali Idate

Abstract: Application On Crime Reporting Can Handle Data Of Criminals Who Are Under TheJudicial Surveillance Or Are Trial. This Portal Will Be Most Use For Police Department/DEFENCE For Searching For Criminals. With The Help Of This Software People Can EasilySubmit Their FIR In The Police Station. So All The Processes Of FIR Are Done Very Easily.

93


Paper ID: 187 Title:PID Temperature Controller Infant Incubator Using RTD


Harsh Jadav || Amar Bansode || Prof. Divya Sharma

Abstract: The Birth Problems And Premature Birth Can Be Caused By Birth In Early PregnancyAnd The Lack Of Pregnancy Nutrition So That The Baby Easily Induces Hypothermia. Therefore,Incubator Is Required For The Babies To Adapt The Outside Temperature And To Help ThemSurvive. Proposed System Design Considers The Precision Control For Sensitive ApplicationWhich Is Achieved Using PWM Calculated With PID Algorithm. Fail Safe Provisions Plays AnImportant Role In System Design Which Monitors Sensor Probes, External Power And Heating ToBe In A Defined Range. Sensors Selected Should Be Stable Over A Long Period Of Time WithPrecise Variations. RTD PT100 Suits Best For The Given Application Considering TheTemperature Range Which Sensor Provides Accuracy And Stability.

Paper ID: 188 Title:Polarization Sensitive Metasurface for Holography


Deepthi Sekhar || Supriya Dicholkar || Payal Mohadikar || Payal Varangoankar

Abstract: Metasurfaces for polarisation sensitive holography is suggested here which iscombination of holography and nanotechnology. Metasurface holograms are nanoscale structuresfabricated on firm substrates. A polarization sensitive recording material consists of siliconnanostructured patterns on a glass substrate, which act as superpixels. These superpixels respondto a certain polarization state of the incident light. Huge data can be recorded in the hologram byscheming and positioning the nanofins to respond differently to the chirality of the polarizedincident light.These nanofins can also pave the way to practical applications including polarizationmanipulation, beam steering, novel lenses, and holographic displays.

94


Paper ID: 189 Title:Formative Assessment with Evaluation & Scoring Tool - A-TEST


Jyothi Arun || Rovina D'Britto || Sachin Gavhane || Snigdha Wasnik || Yogita Shelar

Abstract: In large classrooms with limited teacher time, there is a need for automatic evaluation oftext answers and for real-time, personalized feedback as students learn. Most automatic essayscoring systems focus on providing scores that are comparable to human scores. While this helpssave time in large scale or ongoing assessments, it does not provide real time help to learners.Moreover, training the system generally requires the help of experts in machine learning and NLP.We discuss the design of A-TEST, a text evaluation and scoring tool that can learn text answersand the scoring methodology from manually scored answers and also directly from teacher inputusing LSA, NLP and SVD techniques. In addition, A-TEST provides the necessary information toour web tutoring system thus enabling it to provide real-time feedback during the formativeassessment process.

Paper ID: 190 Title:Network Performance Improvement in AODV with Improved Weighted Clustering


Supriya Dicholkar || Payal Mohadikar || Deepthi Sekhar || Payal Varangaonkar || Poonam Chaudhari

Abstract: Mobile Ad-Hoc Network Is Integral Part Of Growing Wireless CommunicationNetwork .Different Protocols Available In MANET Are DSDV, DSR, AODV, TORA. MANET IsInfrastructure Less Mobile Network Without Centralized Administration So Security Is MainConcern In MANET. Research Work Is Carried Out MANET Security As It Is Used For MostCrucial Military Operations And Rescue Operations. In This Paper We Are Focusing On DifferentAttacks On AODV And Security Measures Taken Against Them For Network PerformanceImprovement.

95


Paper ID: Title:A Study on Cyber Crime and Digital Forensics in Network Security

Author1:191 Author2: Author3: Author4: Author5:

Vaishali Salvi || Sejal D'mello || Reena Somani || Pranoti Nage || Pragyamani Sharma

Abstract: The progress of technology has made man dependent on Internet for all his needs.Internet has given man easy access to everything while sitting at one place. With increasinginternet penetration, Cybercrime have also increased in the last few years. A Cyber Crime is acrime in which main objective of the crime is computer or it can be used as a tool to make anoffence like cyber terrorism, credit card fraud. Cyber forensics is an electronic discovery techniqueused to determine and reveal technical criminal evidence. It often involves electronic data storageextraction for legal purposes. In this paper we overview about cyber forensics and networkforensics.

Paper ID: 192 Title:Simple Text Based Shoulder Surfing System Using Resistant Graphical Password


Mr. Krishnashankar Lodh || Akash R. Gupta || Bhupendra Singh Rawat || Abhishek Kumar Mathur || Prof. Rajesh Gaikwad

Abstract: In The Password Scheme Security Process, High Percentage Of Users Are FamiliarWith The Textual Password Scheme Instead Of Graphical Password Scheme But In Text-BasedPassword Scheme Leads To A Threatening Security Problems. Text-Based Shoulder SurfingResistant Graphical Password Schemes Is Both Secure And Efficient Enough. In This ProposedScheme, We Propose An Improved Text-Based Shoulder Surfing Resistant Graphical PasswordScheme By Using Color Pattern In Much Efficient Form And Pattern. The Security And UsabilityScheme Can Easily Be Researched In Well-Mannered Efficient Way In Our Proposed System. It IsBetter Solution Against Shoulder Surfing.

96


Paper ID: 193 Title:A New Way of Viewing Television


Mohan Kumar || Manoj Mishra || Bhavin Shah || Nilesh Gode || Divya Sharma

Abstract: Home display technology has evolved at a fast pace. In the coming years, we willwitness big and unobtrusive 'lifestyle' surfaces that will be capable of covering the entire wall.With such capability we can have a better system that provides viewers with a collective andpersonal experience. This system will be able to adapt to multimedia.

Paper ID: 194 Title:Wireless Sensor Network For Industrial Monitoring


Divya Sharma || Manojmishra || Jyoti || Jyotigurav || Mohan Kumar

Abstract: During Industrial Operations, Many By Products Are Generated Which Can BeHazardous To The Health Of Workers Working There. Very Few Industries Setup Such WirelessSensor Networks (Wsn) In Their Workshops As The Cost Of These Systems Are High. ThePurpose Of This Concept Is To Provide A Low Cost Integrated Sensor System Consisting OfVarious Sensors. This Device Would Collect The Data And Send It To The Main Database Via ApiWhere The Information Would Be Analyzed And Necessary Measures Can Be Taken To AvoidMishaps.

97


Paper ID: 195 Title:An RF Based Intruder Detection Using Radar System


Gauri Salunke || Manoj Mishra || Divya Sharma || Jyoti || Mohan Kumar

Abstract: In Recent Years, Peoples Are Using Electromagnetic Theory For ExchangingInformation In Free Space For Various Home & Defense Applications. From Mobiles To HealthMonitoring Systems. Intruder Detection System Is A Type Of Security System & Object DetectionSystem Using Radar System. Intruder Detection System Development Attracted The ResearchersMind Towards Radar System. As We Know The Nature Of Rf Of Deep Penetration The Vital SignDetection System Includes Various Domain Of Application, Viz. Medical, Security, Etc. ThisPaper Presents Review Of Rf Based Intruder Detection Using Radar. In This Paper, Vital SignDetection Techniques Are Presented.

Paper ID: 196 Title:UWB Antennas


Payal Mohadikar || Supriya Dicholkar || Deepthi Sekhar || Payal Varangaonkar

Abstract: The Demand Of Compact And Low Profile Antennas Has Increased With TheAdvancement In Wireless Communication System. Ultra Wideband Antennas Are Widely UsedFor The Same. A Variety Of Structures Are Analyzed And Designed To Obtain Ultra WidebandResponse. This Paper Explains Printed Monopole Antennas And Discusses Various ModifiedCircular And Rectangular Structures To Obtain Ultra Wideband Characteristics. The DiscussedConfigurations Yield Operating Bandwidth From Less Than 2 Ghz To More Than 10 Ghz WithCo-Polar Gain Of Around 1 To 2 Dbi Over Complete Bandwidth. Due To The Realized BandwidthAnd Gain, The Configurations Can Find Applications In Personal Mobile Communication, Blue-Tooth And Wi-Fi Wi-Max Applications In 3 To 10 Ghz Frequency Range.

98


Paper ID: 197 Title:An Android Based Application to Find Missing Children and Lost Belongings (F.I.N.D.)


Dr. Meenakshi S. Arya || Manali Muley || Pranav Desai || Hemendra More

Abstract: Locating Missing Items Is A Challenging Complication That People Face Frequently.F.I.N.D. Is An Attempt To Solve This Problem By Taking The Advantage Of Interactions AmongPeople. The Proposed System Will Implement An Android Application Which Will Help TheUsers To Find Lost Items And Missing People. Nowadays, Smart Phones Have Brought Us CloserAnd Have Created A Platform For People To Interact Socially. When A Particular Object Is Lost,The Only Way To Find It Is Through Police But The Proposed System Will Help People InteractThrough The Application And Contact The Owner If The Lost Object Is Found. The ApplicationWill Also Help Find Missing People. Using This Application, Will Help The User Register TheirComplaint On The Application And If The Complaint Details Match With The Registration InFound Section, The User Will Be Informed About Object/Person. The Lost Objects Will Be SortedBy Location.

Paper ID: 198 Title:Li-Fi Audio Transmission


Pranay Smendhe || Assistant.Prof.Deepthi Sekhar

Abstract: Li-Fi Stands For Light-Fidelity. Li-Fi Is Transmission Of Data Using Visible Light ByTransmitting Data Through An Led Light Bulb That Operates So Rapidly Than The Human EyeCan Follow. If The Led Is On, The Photo Detector Transmits A Binary One; Otherwise It's ABinary Zero. The Idea Of Li-Fi Was Introduced By A German Physicist, Harald Hass. The TermLi-Fi Was First Introduced By Haas In His Ted Global Talk On Visible Light Communication(Vlc). According To Hass, The Light, Which He Referred To As "Dlight", Can Be Used ToProduce Higher Data Rates Up To 1 Giga Bits Per Second Which Is Much More Faster Than OurBroadband Services Used Today. This Prototype Discusses The Implementation Of The Basic Li-Fi Based System To Transmit Sound Signal From One Device To Another.The Purpose Is ToDemonstrate Visible Light Communication (Vlc) Through An Led And Receive The Signal At TheReceiver Through A Detector. The Sound Transferred By Led In The Form Of Visible Light IsDetected At The Receiver Without Fading.

99


Paper ID: 199 Title:Analysis of RF Harvesting Circuit Using Microstrip Patch Antenna Array at 1.8 GHz as Harvester


Tanu Sharma || Akanksha Bhargva || Gauri Salunke || Jyoti Dange

Abstract: As Per The Growing Number Of Mobile Towers And Simultaneously Increase InDemand To Power Wireless Devices, RF Energy Harvesting System From Mobile Towers WillProve Beneficial For Alternate Energy Harvesting Source. A High Gain Patch Antenna Array IsDeveloped. Germanium Diode As A Two Stage Rectifier Is Also Designed. High Gain AntennaArray Is Designed And Fabricated To Capture Maximum Signal Emitted By Transmitter. TheAntenna Is Fabricated On �� 4 Substrate Having Low Cost Which In Turn Makes The Antenna Array A Cost Effective Solution For RF Energy Harvesting. The Designed, SimulatedAnd Fabricated Antenna Array Which Achieved A Higher Gain Of 9.29db Has Lead To IncreaseThe Size Of Antenna...........

Paper ID: 200 Title:Query Mining Based On User Logs


Ameya Ajgaonkar || Vijay Gupta || Vijay Mistry || Virendra Chauhan || Prof. Komal Gothwal

Abstract: In General, The Queries Inserted In Search Engines Are Short. They Do Not ProvideSufficient Information For An Effective Selection Of Relevant Documents. For User Requests,There May Be More Unrelated Documents Listed Than Those Listed Once. However, The MostCommon Practice Includes Searching For Occurrences Of Query Terms In Documents. In ThisStudy, We Proposed A New Method In Which The Documents Will Be Listed Based On UserRecords.These User Records Contain The Query Term And The Documents That Were ClickedFor The Corresponding Search Term. The Main Idea Is To Extract Correlations Between QueryTerms And Document Terms By Analyzing User Records. After Finding The Correlation, ThisCorrelation Between The Query Term And The Document Term Is Used To Expand The User'sQueries. With The Help Of This Extended Query, The System Can Now Extract More RelevantDocuments.

100


Paper ID: 201 Title:Overview of Iris Recognition with Ubiris.V2


Suvarna Pansambal || Swati Shirke || Aruna Pavate || Divya Kumawat

Abstract: Automated Human Identification At-A-Distance, Using Completely Self Regulating IrisSegmentation, Is Extremely Challenging As Well As Wide Range Of Private Citizens AndForensics Applications. Iris Pictures Obtained At-A-Remove Utilizing Unmistakable And InfraredImaging Are Frequently Uproarious And Experience The Ill Effects Of Dissimilar OtherworldlyChanges To A Great Extent Coming About Because Of Dispersing, Albedo And PhantomAbsorbance Selectivity. Hence Further Research Endeavors Are Required To Create HighlightExtraction Procedures Which Are More Tolerant To Light Changes And Commotion. We ShowThe Iris Rendering Issue As 2-D Gabor Coding Arrangement In Light Of ComputationallyProficient Which Is Comprehended By Generally Considered............

Paper ID: 202 Title:Automation Of Generic Prescription


Anjanikumar Pandey || Atharva Joglekar || Naishadh Kalyanpur || Vaibhav Kangane || Prof. Samira Nigrel

Abstract: An "Automated Generic Prescription" System Is Developed To Assist The Patient ByEradicating Outdated Paper Based System In The Era Of Fast Technology And Big DataManagement. Its Prime Objective Is To Make Masses Aware Of The Cheaper Generic SubstituteTo The Medicines Their Doctors Prescribe, To Make Sure Everyone Is Able To Afford Their CureOf Disease Or Illness Irrespective Of Any Shortcoming In Their Lifestyles. And To Make This AStringent Possibility We Come With A Universal Token As A Reference To The Patient's Data ToBe Stored In Our Database Which Would Be Used By Our System To Get Secured Access OfOne's Details When They Go To Any Of The Medical Fraternity To Avail Their Services. WeMaintain And Fetch Every Previous History Of The Patient's Visit To The Doctor With A SingleReference Id For The Doctors To Help Them Check And Evaluate The Patient's HealthAccordingly And Reach To A More Significant And Precise Decisions.

101


Paper ID: 203 Title:Augmented Reality (Ar) In Education: Current Technologies and the Potential for Education


Bhavna Arora || Nida Parkar || Tejal Rachh || Priti Rumao

Abstract: Therealdomainis3D,Mostlyweuse2d Mediaas Learning Methodology.ThemixtureOfaugmented Reality...........

Paper ID: 204 Title:Educating Masses with Augmented Reality


Apeksha Waghmare || Ajay Singh Thakurathi || Dhavalkumar Sonavaria || Dharmit Viradia

Abstract: Along The Swift Digitalization Taking Place Globally, Augmented Reality Turns Out ToBe The Bridge That Connects Real And Virtual Continuum In Such Cases. The Paper Proposes AnAndroid Application Catering The Needs Of Education Providing A Rich Learning Experience ToStudent Community Through AR Along With Preserving Art Of Reading. Humans Perceive WhatThey See And Sometimes It Might Turn Troublesome To Interpret Real Life Problems Or QueriesWhich In Turn Might Hinder A Sense Of Understanding About A Particular Subject .TraditionalApproaches Today Have Been Trying Hard To Justify The Concepts But Sometimes SomeConcepts Just Require A Visual Representation Which Can Be Put Forward By The Concept OfAugmented Reality. The Paper Proposes A Cloud Based Application Which Provides An IntuitiveLearning Experience With The Help Of Augmented Reality For Students And Learners WithVaried Interests.

102


Paper ID: 205 Title:Review on Effectiveness of Social Networking in Education


Sandip A. Zade || Ameya Jadhav || Ankur Bhattacharjee || Sarang Kulkarni

Abstract: Social Networking Has Become Very Popular During The Past Few Years, And It PlaysAn Important Role In Our Life Currently. It Helps Us In The All Fields Of Life Such As PoliticalField, Economic Field And Educational Field. In Recent Times, The Use Of Social NetworkingHas Been Transitioning From The Recreational To More Formal Uses In Corporate AndEducational Contexts. The Conceptual Structure Of The System Focuses On Four MainFundamentals Of Learning Activities, Namely, Learning Objects, Collaborative Tasks, ReflectionAnd Evaluation. The Learning Object Tool Consists Of A Learning Object Template Which AllowsA Course Manager To Upload Relevant Resources From The Learning Object Library. TheseLearning Objects Stored In The Library Are Meta-Tagged To Allow Students To Search For TheSpecific Ones They Require. This Paper Will Summarize Effectiveness Of Social Networking AsEducation Tool.

Paper ID: 206 Title:Reduction of Leakage Current using Self Controllable Voltage in 4x4Dynamic RAM Cell


Mr. Sarang Kulkarni || Ms. Prajakta Borole || Mr. Sandip Zade || Ms. Ameya Jadhav || Mr. Ankur Bhattacharjee

Abstract: With the rapid development in the technology to improve the semiconductor chipperformance, system designers focused on the circuits for their reliability, low power dissipation,low power consumption, chip density and leakage current. The designers reduced each of these forimproved performance, reduced cost and chip area. CMOS technology increased in level ofimportance to the point where it now clearly holds the center stage as the dominant VLSItechnology. Along-with these improvements, the memories have provided with components ofconsiderable capability and extensive application. The main memory is usually of the randomaccess type..............

103


Paper ID: 207 Title:Secure Steganography Using Geo-Fence


Abhishek Galinde || Ishwar Suryawanshi || Pritesh Sisale || Shweta Sharma

Abstract: This paper is based on a new steganography application to hide the secret messagebehind the image with the help of Geo-Fence technique. This application is design to share secretmessage/information behind the image and that image is stenograph along with the Geo-Coordinates. This purposed system provide an image platform for the user to input image and atext box to insert a secret message. The system encrypt the secret message and image file with geo-coordinates of receiver using modified LSB technique. Once the process is done user can send thestego image to receiver using same application. At the time of retrieving stego file its checks thegeo coordinates using in built technology of android i.e GPS so that the file can only be decryptedat particular location.

Paper ID: 208 Title:Arduino Microcontroller Based Airphibian Robot for Surveillance


Krupali Burute || Mayuri Bansode || Shreyas Naik || Suraj Mhaske || Dr. Bhavin Shah

Abstract: This Paper Is A Arrangement Of The Outline Procedure And Comprehension Of TheAirphibian Surveillance Robot. A Prototype Of Flying Machine Based On Four Rotors Design.The Airphibian Robot Can Be Controlled By The Transmitter And Receiver Also Operated By AnArduino Microcontroller. We Want To Achieve Implementation Of An Arduino Microcontroller AsThe Airphibian Surveillance Robot's Flying Machine Controller.

104


Paper ID: 209 Title:Video Recording Using FPV Camera In Airphibian Robot


Krupali Burute || Mayuri Bansode || Shreyas Naik || Suraj Mhaske || Dr. Bhavin Shah

Abstract: This Paper Is A Arrangement Of The Outline Procedure And Comprehension Of TheSecurity Plays A Vital Role In Day To Day Life. For This Monitoring Of Environment IsNecessary. So Monitoring Of Object As Well As People Is Needed In Every Place At Every TimeImplementing Such System Which Covers Large Amount Of Financial Cost For Hardware DeviceAlso It Consumes Large Space Solution To This Problem Is Using FPV Camera On AirphibianRobot FPV Camera Cover Large With Resolution Of 320X240 QUGA.FPV Camera PerformImage Processing Such As AWB (Auto While Balance) AE (Automatic Experience) And AGC(Automatic Gain Control) For The Video Signal Coming Security Plays A Vital Role In Day ToDay Life..............

Paper ID: 210 Title:Survey on Security Using Honeypot


Ashka Ashani || Deesha Nirmal || Viral Doshi || Nikita Patil

Abstract: With The Recent Advancements In Cyber Attack And Ready Available InternetConnection Security Has Become More And More Of An Issue. Here, Honeypots Can Be Used ToEnsure Security. Honeypot Uses Deception To Trap The Attacker And Also Logs Details AboutThe Attacker. The Purpose Of The Paper Is To Give An In Depth Idea About What Honeypot IsAnd How It Can Be Deployed On A Network For Protecting From Malicious Usage Of AnySensitive Data. It Also Focuses On The Various Attacks That Can Occur On The System.

105


Paper ID: 211 Title:Revised Design Model for New Generation Processor to Tackle Side-Channel Attacks


Viraj Parab || Bhagyesh Kurlekar || Vatsal Agrawal || Asst. Prof. Divya Kumawat

Abstract: Spectre And Meltdown Are The Newly Discovered Security Vulnerabilities. TheseVulnerabilities Exploit The Most Widely Used Techniques In Latest Processors; SpeculativeExecution And Out-Of-Order Execution. These Attacks Are Side-Channel Based. In TheseAttacks, Private And Secured Data Is Manipulated And Transferred To The Cache Memory. CacheMemory Acts As A Side Channel And Leaks Out Data. These Security Vulnerabilities Can BreachInto An Entire System And Gain Access To The Private Data Which Causes The Integrity Of TheSystem To Be Compromised. In This Paper, We Have Discussed Meltdown And Spectre Attacks InDetail And Suggested A Hardware Mitigation To The Existing Architecture Of Modern Processors.This Design Model Works With All The Existing Processors And Reduces The Impact Of Side-Channel Attacks To An Extent That It Can Be Nullified.

Paper ID: 212 Title:Future Shopping Technology Using Hybrid Approach


Namrata Naralkar || Sonal Gurav || Priyanka Maurya || Ditixa Vyas

Abstract: The rapid development of mobile communications systems today, along with thechanging times and technology, both in terms of hardware, operating system used and the use ofInternet bandwidth, making some mobile applications also contribute to exploit thesedevelopments. Mobile Commerce Applications for an example, became the most popularapplications for mobile users who do not want to trouble yourself with having to carry casheverywhere. An important technology behind mobile payments is called Near FieldCommunication (NFC).The NFC (Near Field Communication) became a popular short distancewireless communication technology by providing many convenient services such as an easypayment in a store..........

106


Paper ID: 213 Title:Autonomous Plant Health Indication System Using Image Processing In MATLAB


Prof.Meenakshi Saron || Ajinkya Borse || Rohan Parsekar || Vinit Harsora || Pratik Shirsekar

Abstract: India Is An Agricultural Country And Most Of The People Are Farmers. Farmers AreCultivating Different Types Of Crop. These Crops Affected By Fungi, Bacteria, Viruses And ManyMore. Identification Of Disease Is Very Difficult For Farmers At Its Early Stage. There AreNumber Of Diseases Found In Crop. Farmers Cannot Be Determining Accurate Percentage OfObserved Disease. Patterns Of Diseases Are So Many Complexes That Finding Affected Area IsDifficult. In Modern Science, Taking Image Of These Diseases By Using Digital Camera OnRobot To Collect The Data For Leaf Detection. It Is Very Difficult To Monitor The Plant DiseasesManually. It Requires Tremendous Amount Of Work, Expertise In The Plant Diseases, And AlsoRequire The Excessive Processing Time.................

Paper ID: 214 Title:Review of IOT in Pet Management


Jigarmasekar || Jashsohni || Shweta Sharma

Abstract: With The Advent Of New Technologies And Enhancement In The Ones AlreadyExisting, Particularly In The IT Industry, The Mankind Has Received So Many Technologies AtTheir Disposal Such That They Can Reduce Their Physical Efforts And Adopt To More AutomaticFriendly Methods In Order To Get Their Jobs Done. One Such Technology That Is RapidlyDeveloping Is The IOT, I.E., Internet Of Things.Iot Is Basically A Cluster Of Networking DevicesInterconnected With Each Other And Are Embedded With Sensors And Connectivity Chips ThatEnable Exchange Of Data Between Devices And Thus Making It Responsive. The Concept Of IotCan Well Be Paired To Pets And Managing Their Various Activities. In This Paper, We See HowWe Can Manage Pets Without Much Human Intervention Using The Concept Of Iot.

107


Paper ID: 215 Title:Two Way Authentication Protection for Cloud Storage System


Amit Choudhary || Akshay Mohite || Ravindra Chavan || Sejal D'Mello

Abstract: To design a protected authentication protocol while considering the various kinds ofaspects in system to observe user's behaviour and to make convenient as well as user friendlyprotocol is difficult. Involving human in authentication protocols, while promising, is not easybecause of their limited capability of computation and memorization. Therefore, relying on usersto enhance security necessarily degrades the usability. We demonstrate new technique ofauthentication using visualization which can enhance not only the security but also the usability ofauthentication. To that end, we propose two visual authentication protocols: one is a login id-password protocol, and the other is a QR code-based authentication protocol

Paper ID: 216 Title:Smart Traffic Control Using Opencv


Deepali Kawade || Simran Deshmukh || Snehal Gamare || Prof.Amruta Sankhe

Abstract: We know that, the population of cities and vehicles on the road is increasing rapidly. Onaccount of this, controlling the roads have seamless traffic movement is major issue. Today'straffic management system has no emphasis on live traffic scenario, which leads to inefficientsystems. The traffic timers now installed show the preset time making it an open loop system. Ifincorporated a closed loop system, it will be possible to forecast the exact time to regulate trafficlight timers. If timers are made intelligent to predict exact time then the system will be moreefficient as it will greatly reduce the time wasted on unwanted green signals . This project has beenimplemented by using...........

108


Paper ID: 217 Title:Data Adaptive Stock Recommendation


Mayank H. Mehta || Kamakshi P. Banavalikar || Jigar M. Parekh || Jeet N. Khetan || Siddharth Maheshwari

Abstract: The volatile nature of the stock market makes it difficult to guess the movement ofstocks. These fluctuations make forecasting complicated. Results of the company in a financialperiod(quarterly, half-yearly or annual), as well as the trend in stocks of peer companies of thesector and the market in general, contribute to these movements. This paper proposes usinghistorical data to understand movements in stocks using various technical indicators. With the helpof these indicators, Technical Analysis is done using Support Vector Machine (SVM) to analyzethe relationship of these factors and predicting the stock performance.

Paper ID: 218 Title:IOT Based Gas Leakage Detection System With Database Logging, Prediction And Smart Alerting


Chaitali Bagwe || Vidya Ghadi || Vinayshri Naik || Neha Kunte

Abstract: Internet of Things is next generation's aggrandizement of Internet, where network ofphysical devices are combined with different types of things such as sensors and they exchangedata with the help of connectivity to the internet. IOT is advantageous, efficient and itsimplementation on a large scale has transformed many aspects of the way we live. It is fullyinterconnected network which provides powerful data collection and analysis capabilities, thus,aiming towards smart world of progress. The leakage of gas if undetected can prove to behazardous and fatal. With the use of IOT, we have implemented Gas Leakage System whichincludes Database logging, Prediction and Smart Alerting techniques involving sending textmessage and an e-mail to the concerned authority..............

109


per ID: 219 Title:Detect Online Spread of Terrorism Using Data Mining


Aakash Negandhi || Soham Gawas || Prem Bhatt || Priya Porwal

Abstract: Terrorism has grown its roots quite deep in certain parts of the world. With increasingterrorist activities, it has become important to curb terrorism and stop its spread before a certaintime. So as identified internet is a major source of spreading terrorism through speeches andvideos. Terrorist organizations use internet to brain wash individuals and promote terroristactivities through provocative web pages that inspire helpless people to join terrorist organizations.So here we propose an efficient web data mining system to detect such web properties and flagthem automatically for human review.

Paper ID: 220 Title:Patient Management System For Doctors Using Cloud Computing


Chandrashekar Bhosale || Nilesh Narkar || Vinay Bhat || Deepali Maste

Abstract: With long waits and all the tackles for user or patients to reach out their respectivedoctors for simple diagnostic tests and their records to update and regular check-up causesenormous amounts of time. This paper give solution to all the problems faced to form newlydeveloped system for patient system. This patient healthcare system provides automated laboratorytests order, appointment system, infrastructure for medical record with a security forunauthenticated person or entry and Global positioning system features. In this patient can accesstheir medical data remotely access at respective location. It makes system compatible to reach outfor doctor using an efficient appointment system. Manage health status for improvement of healthand discover ourselves to give new life. Since all the data storage in particular repository or cloudit is less time and space complexity than paper-based system. It too does increases performancewith lots of learning.

110


Paper ID: 221 Title:Smart watering system for domestic use using IoT


Krishna Gupta || Prathamesh Jadhav || PradeepKumar Maurya || Prof.Krishnanjali Shinde

Abstract: Plants are very important living things. They have a great impact on human lives. Plantsat home are also an important aspect, Today home plants are dying at a very fast rate and thushaving adverse effects on human lives. Many people forget to water plants at their homes due tocertain reasons especially when they are on a vacation or trip, when there's no one present to waterplants at home. Untimely watering and over watering are also other reasons why plants growth getdeteriorated. According to many studies and surveys the two major important reasons for fading ofplants are not watering the plants, overwatering, untimely watering .The proposed system willsolve all these problems. The proposed system is implemented using ArduinoNano/NodeMCUwhere the daylight sensor will alert the users about lack of sunlight via the android app and themoisture sensors will detect the moisture content present in the soil and will alert the users andandroid app.

Paper ID: 222 Title:Erp Billing Software Module


Anisha Gursale || Vijeta Chouhan || Karan Mistry || Prof.Trupti Shah

Abstract: ERP system is implemented to manage all aspects of the business such as timelyrevenue collection, simplified taxation, integrated reports generation, etc. in an integrated manner.Enterprise Resource Planning (ERP) system consists of different sets of software that are used tointegrate the business functions in a company or organization. These systems provide an integratedsolution which satisfy the needs of an organization and are in high demand by all theorganizations. This system needs careful planning and also needs to be organized or else theimplementation process is costly and time consuming. If successfully implemented, ERP systemsprovide many benefits to those organizations that adopt them. Invoices are voucher to reimbursefor official expenses. However, fake paper invoices spread in our lives. The appearance ofelectronic invoices can solve the problem of fake invoices. After a consumer pays for officialexpenses the business generates a detailed consumption inventory which must be signed by theconsumer and inserted into the invoices.

111


Paper ID: 223 Title:Movie Recommender System


Sagar Badhe || Abhishek Prasad || Omkar Jondhale || Prof. Divya Kumawat

Abstract: Usually there are different approaches and algorithms of data filtering andrecommendations. Online content and service providers deal with the problem of providing similarcontent on a regular basis because of the sheer volume of data available. Our project deals with asimilar problem of predicting user preference for movies using the database. We present a memory– based Collaborative Filtering algorithm that learns the behavior of the users. This representationallows us to use traditional clustering algorithm in this space. It also helps us to overcome one ofthe biggest problems which is that of lengths of user features options in the voting space. Here,nearest-neighbor scheme is implemented. In the end we will show the main challengesrecommender systems come across.

Paper ID: 224 Title:Android Application on E-Ticketing Railway System Using Qr-Code


Vinay Maheshwar || Kalpesh Patil || Azim Maredia || Apeksha Waghmare

Abstract: India's population increase day by day; mostly common peoples are depending on therailway locals for traveling to their destinations. One of the biggest challenges in the currentticketing facility is "QUEUE" while buying our suburban railway tickets. In this fast-growingworld of technology and population, we still stand in the queue for tickets at ticket-counter. It isfrustrating at times to stand in the queue or when we forget our cards and the balance in the smartcard is less. E-Ticketing is mainly to buy long way distance tickets whereas the local train ticketsare bought at ticket-counter and no mobile applications for the same are used on daily basis. Thus,we introduce M-ticket application where Mobile tickets are generated conveniently for users usingan application...........

112


Paper ID: 225 Title:Study of Augmented Reality Navigation Systems


Abhishek Jain || Shreyas Sawant || Abhishek Jha || Prof. Suvarna Pansambal

Abstract: Reanimating virtual objects into real world is what strives the Augmented Realitycommunity. By virtue of AR, the user gets to firsthand experience a virtual object which seems toexist in the real world environment, but is paradoxical as the object is just a mere representation.Augmented Reality Techniques are revised and extended from their legacy counterparts leading tobetterment of the existing solutions. These researches have birthed into ideas which earlier wereunheard of, Point-Clouds, SLAM, Kalman Filter are to name a few. Almost every smartphonetoday has the hardware and software capability to process AR on-board, along with this thedevices are designed with various sensors, GPS being one of them

Paper ID: 226 Title:A Study of Translator Camera Using Optical Character Recognition & Natural Language Processing


Aditya Prabhu || Mihir Pitroda || Susmit Wadikar || Prof. Suvarna Pansambal

Abstract: Systems today are constantly evolving to achieve accurate & efficient results day byday. The sole purpose is to help human in their day to day queries. Today Artificial Intelligence(AI) is present in a variety of fields ranging from trivial guidance mechanisms, Virtual Assistants,Navigation Guides, to large scale industrial co-ordination systems. There are numerous AIassistants that help people solve their problems. This paper is a summarization of the overallresearch conducted to achieve the principled goal of digital image data translation, for the targetedcontent of Language. The paper summarizes a brief overview on the existing systems andalgorithms that may be efficient in the process of Language Translation. As countries that have ahuge cultural diversity, tend to have multiple set of languages that are used locally or nation-wide,this creates a communication gap due to existence of a language barrier. Therefore, it is a matter ofpriority to enable the systems to develop or adapt to techniques that ease this barrier.

113


Paper ID: 227 Title:System For 3 Level Security Verification Using Image Based Authentication & OTP


Dr. Mamta Meena || Harshit Singh Lamba || Deepit Taterwal || Moiz Shaikh

Abstract: This paper disucsses about improving authentication and authorization techniqueswhich can be easily implemented and are user friendly Every individual has their own personallife. In a world with internet, the process of communication and personal life management hasdrastically changed from what it was few decades back. But for any internet user, the advantage ofinstant communication comes at a cost. The network infrastructure has loopholes which gives wayto hackers to access any registered users entire data. The hacker can further exploit an individualfor personal benefits. These loopholes can we covered by introducing a multiple authentication andauthorization techniques in the process. We have designed a unique 3 Level Authentication andAuthorization system while keeping in mind the key fundamentals of security which areConfidentiality, Integrity & Availability. We want each and every user to feel secure and safe fromhackers.

Paper ID: 228 Title:Online Grocery Shopping


Anurag Mayekar || Shrinath Keni || Siddhesh Gode || Deepali Maste

Abstract: Online grocery shopping is an entirely novel means of buying preferred grocery goodsfor household consumption. Such a concept has been launched in suburban cities of India in thepast one year by launching websites such as delivery at home.co.in,grocery at home.co.in andkariyana.com to name a few. This also marks the early phase of online grocery selling concept inthe city. This idea is intended to include the factors that affect the intention of the consumers tobuy groceries online. The most prominent factors of them all include Attitude, Subjective Normsand Perceived Behavioural Control.

114


Paper ID: 229 Title:Counterfeit Product Detection


Sandeep Hembade || Mayur Patil || Anmol Gandhi || Prof. Krishnanjali Shinde

Abstract: The systemenvisages developing an app that connects consumers to everyday brandsand products and enables brands to provide offers and loyalty benefits to consumers. It alsoempowers a consumer to ascertain that the product they are purchasing is genuine, along withquintessential information regarding the brand and product, all at their fingertips, on their phone.

Paper ID: 230 Title:Effective Music Player Integrated On User's Mood


Rohit Kadam || Darshan Gosavi || Chaitanya Sankhe || Amruta Mhatre

Abstract: Conventional method of playing music depending upon the mood of a person requireshuman interaction. To achieve this goal, an algorithm is used to classify the human expressionsand play a music track as according to the present emotion detected. It reduces the effort and timerequired in manually searching a song from the list based on the present state of mind of a person.The expressions of a person are detected by extracting the facial features. An inbuilt camera isused to capture the facial expressions of a person which reduces the designing cost of the systemas compared to other methods.

115


Paper ID: 231 Title:Effectiveness of Saas Cloud Model For Retrieving Images From CBIR System


Dr. Mamta Meena || Shrutika Mallya || Shrusti Talati

Abstract: The interest in the digital imaging has led a potential growth thus fuelling up theproblem of its storage and retrieval. The traditional methods which supported for local machineimage retrieval met a lot of problems related to the image indexing and massively the space forefficient storage. The computational capabilities suffered with the growing need for a digitalimagery space leading to a poor computing efficiency. Also, just a huge storage space can merelysolve the problem of efficient image retrieval. In the directory of several images, locating thedesired image might cost considerable time and effort. It makes it easier to search an image by itsfeature thus short listing images, out of many in the database, thus decreasing the computationalcost.........

Paper ID: 232 Title:Sustainable Smart City Iot Applications :Eco-Conscious Cruise Control For Public Transportation


Priti Rumao || Nida Parkar || Bhavna Arora || Tejal Rachh

Abstract: In A World Of Business The Data, Information And Assets Endowment Millions OfReal-Time Interacting And Communicating Products, Systems Created On Internet Of Things (Iot)Technologies Purposes On Exploring These Assets In A Buoyant And Workable Way PermittingThem To Spread Their Complete Potential The Two Innovative Iot Smart City Applications ThatRefers To Energy And Heat Management By Utilizing Different Possessions And Resources I.E,Different Meters, In Mandate Tooptimize Use Of Energy In Commercial And Residential Areas IsDiscussed In This Paper.The Second Application Refers To Cruise Control For PublicTransportation, And Aims At Utilizing Different Resources (Such As Environmental And TrafficSensors) In Order To Provide Driving Recommendations That Aim At Eco Efficiency. We AlsoHighlight The Iot Challenges As Well As Potential Enabling Technologies That Will Allow ForThe Realization Of The Proposed Applications.

116


Paper ID: 233 Title:Home Automation Using Iot: A Survey


Shriya Salunkhe || Deepa Suryavanshi || Jagruti Keni || Trupti Shah

Abstract: Internet of things is now worldwide usage of any field .Home automation is extensionof Internet to provide efficiency and comfort in regular life. Analyzing the current smart phonemarket, novice mobile users are opting for Android based phones. In the present times, we can findmost of the people clinging to their mobile phones and smart devices throughout the day. Hencewith the help of his companion – a mobile phone, some daily household tasks can be accomplishedby personifying the use of an android application. Home automation gives an ability to controlthings around the home using the mobile application. A home appliance is a device or instrumentdesigned to perform a specific function, especially an electrical device, such as a light, fan forhousehold use. The worlds appliance and devices are used interchangeably.

Paper ID: 234 Title:Impact of IT on Indian Economy


Priya Borade || Sandesh Borade

Abstract: In the digital era, Information technology industry is now become one of thecontinuously growing sector of Indian economy. The information technology sector becomes theboon for employment for increasing populations of India. It helped in big way for providing theemployment and reducing the unemployment in India. Information technology includes thesoftware and services, Information Technology Enabled Services and hardware segments hassteady rise in the growth in last few years. The purpose of the paper is to analyze the contributionof information technology in growth of Indian economy and its social impact, education andvarious sectors

117


Paper ID: 235 Title:Personality Prediction By Discrete Methodology


Gayatri Vaidya || Pratima Yadav || Reena Yadav || Prof.Chandana Nighut

Abstract: There is growing interest in personality traits by organization to better-Understand thediversity of responses of candidates to similar circumstances. Personality traits are the relativelyenduring patterns of thoughts, feelings and behavior that reflect the tendency to respond in certainways under certain circumstances. System will be constructed by first constructing a datasetconsisting of photographs, quality factors, personality measurement and intelligence measurementfor building an end to end network for personality prediction where self-reported personality traitscan be predicted reliably from an image. Experimental results shows the personality traits of thecandidate or a person i.e. imagination ability, creativity, leadership, capacity of mutual respect andmany other traits.

Paper ID: 236 Title:Machine Learning Under Attack: Literature Survey


Aruna Pavate || Divya Kumawat || Suvrna Pansambal || Pranav Nerurkar || Dr. Rajesh Bansode

Abstract: Machine Learning is an area that carries many advantages with it for businesses thatassume it. Machine Learning is a data exploration process which influences machine learningalgorithms to repeatedly study from the present data and assist the machine to find hidden patternswithout being programmed for. Most of the present machine learning classifiers are extremelyexposed to adversarial examples. The study clearly indicates that Machine learning is of hugeimportance given in computer vision applications but it may possible to attack the machinelearning algorithm so that it is necessary to design and develop different defense systems. Thisstudy directed the detailed study of the previous approaches and the comparative analysis amongthese approaches.

118


Paper ID: 237 Title:Self Checkout System Using Image Detection


Tanmay Singh || Keshav Yadav || Ketan Kandalkar || Priya Porwal

Abstract: Most of the current self-checkout systems rely on barcodes, RFID tags, or QR codesattached to items to distinguish products. This paper proposes an Intelligent Self Checkout System(ISCOS) embedded with a single camera to detect multiple products without any labels in real-time performance. The bounding boxes are annotated by background subtraction with a fixedcamera to avoid time-consuming process for each image. The Database for storing the products isused to generate the bill. The contribution of this work is to combine deep learning and datamining approaches to real-time multi-object detection in image-based checkout system.

Paper ID: 238 Title:Real Time Bus Tracking System


Manish Chandwani || Bhoomika Batheja || Lokesh Jeswani || Praveen Devnani || Prof. Richard Joseph

Abstract: In the busy metropolitan cities, people don't have time to invest in waiting for transport.Waiting time for transport in such crowded cities leads to less productivity on a whole. People facethis problem in their daily life where they have no idea about the current status of their transport.So the proposed solution is an android based application that will help the user to check out thecurrent location of the bus and also will help the user to know how much time the bus will take toreach the current location of the user. The system will use IoT as the basis for the application andbasic android application will be interfacing with the updated database to provide the real-timedata to the user, hence enhancing the user-experience.

119


Paper ID: 239 Title:Printease - A Smart Printing Application: Implementation


Suren Sughand || Akshata Mohite || Simran Dembla || Deepika Khithani || Richard Joseph

Abstract: PrintEase - A Smart Printing Application is an android based application which isprimarily built for common people so that they can avail printing service at their fingertips. Themain purpose behind building this application is to save people's time and provide value addedpackages to all the users. Value added packages are generated by analyzing the order history andusage of application. By using Data mining concepts users behavior is analyzed. Particle SwarmOptimization (PSO) algorithm is a data mining algorithm that is used for data analysis andgeneration of packages.

Paper ID: 240 Title:Sustainable Agriculture Using Iot And Aquaponics


Kalp Patel || Siddharth S.P || Akhil Patil || Deepali Maste

Abstract: A system to monitor an aquaponic farm and allowing automation to utilize sustainablefarming with the added benefit of real-time data. The system comprises of various sensors thatcommunicate over the internet and provide the live status of the farm regarding various parametersand provides the user with an option to manage the farm and take actions in response to it. Sinceimplemented over an aquaponic farm user gets all the benefits that come with it. It utilizesNodeMcu as the communicator and aggregator of sensor data which is delivered to a web serverand then this data can be visualized as required. The architecture is simple and can easily bereplicated to a large-scale setup. It has the potential to help farmers manage various resources likewater and also get insights regarding plant health for optimum productivity. The system is capableof enabling farmers to get the most out of their efforts.

120


Paper ID: 241 Title:Smart Robotic Wheelchair Using Arduino And Bluetooth Module


Rahul Jiwane || Priyanka Mahamunkar || Ritu Notani

Abstract: The proposed system describes the design of a smart, motorized and voice-controlledwheelchair using an embedded system. The system design depicts the "Smart Wheelchair" thatsupports voice activation system for physically disabled and old aged people by incorporatingvoice commands which would control the movement of the wheelchair. The voice command isgiven through a cellular device such as cell phone having Bluetooth and the command istransferred and converted to the string for Adriano and is transferred to the Bluetooth Module SR-4.0 connected to the Adriano board for the control of the Wheelchair. When the user says "Go" thechair will move in the forward direction, the chair would move in the backward direction for"Back" and similarly "Left", "Right" for rotating it in left and right directions respectively and"Stop" to stop the wheelchair. This system is designed and developed to save cost, time, energyand dependence on the others for the movements of wheelchair-using physically handicappedperson.

Paper ID: 242 Title:A Web-Based Application For Merging XML Files


Arko Sarkar || Saurabh Patil || Shubham Sharma || Neha Kunte

Abstract: Today various applications are developed which are performing various complexoperations simultaneously. Now, it is not important what applications are being developed, ratherthe importance here is what data is being used, and how these data are stored. So the main aim inevery type of applications is to reduce the overall time and space complexities.XML plays an important role in these type of web applications. XML document comparisonbecomes a central issue in database and information retrieval, during development of application.Many heterogeneous XML sources have similar content and different structures or vice-versa.Hence to centralize all related information about a topic, merging of XML files according tocertain standards is of greatest need and many solutions are emerging...............

121


Paper ID: 243 Title:Automatic Visualization of Descriptive Text


Dharmit Viradia || Ajay Singh Thakurathi || Dhavalkumar Sonavaria || Apeksha Waghmare

Abstract: We analyze the case of putting forth a interface for generating 3D scenes from inputtexts. The component of natural language understanding is framed as a problem of semanticparsing, in which a structured representation of input texts is created and then linking it togetherfor a meaningful representation of scenes in space. We incorporate a dataset of 3D objects that arerecorded with natural language texts and learn how to generate 3d scenes from descriptive texts.This system renders 3D scenes for a correct user input by analyzing text parameters and alsoallows user to interact with the generated scene.

Paper ID: 244 Title:Intelligent Autonomous Six Legged Robot Operate On Uneven Surfaces


Rahul Jiwane || SayaliBhagat || SamitaBhusare || Aruna Pavate

Abstract: This paper presents design and development of an intelligent robot that easily operateson uneven surfaces with six-legged arms. The system design depicts the "Intelligent Robot" thatsupports voice activation system as well as operates through the keyboard. Legged robots areappropriate to stroll on troublesome landscapes to the detriment of requiring complex controlframeworks to walk even on level surfaces. Be that as it may, essentially strolling on a levelsurface does not merit utilizing a legged robot. It ought to be expected that strolling on anunexpected landscape is the run of the mill circumstance for a legged robot. In view of thiscommence, we have built up a vigorous controller for a six-legged robot that enables it to strollover troublesome landscapes in a self-sufficient route; with a constrained utilization of tactile data(no vision is included). This walk controller can be driven by an upper level which requires not beworried about the subtle elements of foot arrangement or leg movements, taking consideration justof abnormal state angles.

122


Paper ID: 245 Title:Automated Essay Grading System


Janam Sarmalkar || Mohid Shaikh || Shivam Samaleti || Foram Shah

Abstract: Proposed Work Aims To Study An Intelligent Essay Recommender And Grader UsingNlp Techniques. A Data Set Can Be Acquired And The Grading Engine Will Be Used To GradeThe Essays. An Enhancer Will Be Constructed Which Will Help Students Improve Their Essays. ItIs An Interesting Topic Based On Machine Learning And Can Be Used To Make QualityEducation More Achievable. The Predictions Will Closely Match Human Analysis. The GradingSystem Model Will Be Trained Using Word Features And Essay Statistics From The VariousEssays Procured From The Data Set.

Paper ID: 246 Title:Application software using IoT sensors for vehicles parking


Hardik Joshi || Tushar A. Kamble || Prof. Foram Shah

Abstract: In the modern scenario parking and traffic jams in metropolitan cities have become acommon problem, the number of vehicles being seen on city roads have increased to a large extentand because of this it has become more problematic for the vehicle users as they are not able topark their vehicles due to the limited spaces. The cost for parking expansion is usually prohibitiveor extremely high. There is a need of an application based solution that uses IOT sensors, IOT dataintegration and GPS to guide the people for the best available parking spot. At the same time theapplication should flag an alarm to security personals when there is disobedience of parking rulesin the metropolitan cities. In this paper we propose the system of technologies which can be usedto solve the above stated problem by making the application system automated, easier and faster inthe coming future. Use of RFID technology, Ultrasound sensors, Raspberry Pi, CoAP, NFC can bedone avoid the human interaction which minimizes the cost.

123


Paper ID: 248 Title:Employee Café Management System Using NFC


Sneha Naik || Riya Kanani || Hiral Oza || Prof.Chanda Chouhan || Prof Charmi Chaniyara

Abstract: Near Field Communication is the latest technology which will change many aspects ofeveryday life in order to provide different solution to payment and ticketing where NFC could beutilized. NFC technology grown from RFID includes many RFID standard and standards for NFCtags. Smartphones usage have emerged a lot in the past few years. In this thesis, we offer theenforcement of RFID tags in the identification card which an NFC enabled Smartphone willidentify. The purpose of this research is to give a second opinion regarding the possibilities of m-payments through NFC and the barriers to overcome to make this a reality................

Paper ID: 249 Title:Automatic Protection System And Risk Mitigation In Railway Using PLC


Vishal Kharote || Neha Bansal || Prashant Palkar || Akshay Penta || Shubham Mhatre

Abstract: This Paper Presents An Automatic Railway Protection System By Controlling AndMonitoring The Train Movements Using PLC. Nowadays Even Though Automation Plays A VitalRole In Almost All Areas But Still Railway Protection And Control System Is Not CompletelyAutomated. Currently The Railway Network Protection Parameters Like Gate Control, IdentifyingTrack Cracks, Track Collision, Grade Crossing, Traffic Light Indication Etc. Are ControlledIndividually Either Manually Or Semi-Automatically By Their Respective Processes. Even Then ASystem To Control All Parameters Simultaneous Does Not Exist To Ensure Safety Operation AndAt The Same Time The Entire Control Is Given Only From Control Room Using EmbeddedTechnology Which Is Tedious In Monitoring And Providing Required Control Under CriticalSituations. To Overcome These Problems, The Proposed Research Provides Both Monitoring AndControl Of All The Above Said Parameters With The Provision Of Issuing Automatic Control InThe Locomotive Itself Using PLC.

124


Paper ID: 250 Title:Smart Classroom: Real Time Feedback Using IOT


Nida Parkar || Bhavna Arora || Pritirumao || Tejalrachh

Abstract: We Live In An Era Where Billions Of Computers Are Interconnected. In The Very NearFuture, Not Only Computers But Also Many Different Digital Devices And Other Physical ObjectsWill Be Seamlessly Connected To Each Other And Be Able To Communicate With Little Or NoHuman Intervention. These Connected Objects Are Called Smart Devices, And This PerceptionisCalled Internet Of Things. In This Paper, The Focus Is On The Application Of Iot In The SmartClassrooms. The Aim Of The Paper Is To Discuss How Intelligent Ambient Can Be Used ToProvide Real- Time, Automatic Feedback On The Quality Of The Lecture Based On The NumberOf Parameters. To Our Knowledge, This Is The First Attempt To Specify The Problem AndAnalyze The Requirements. The Parameters Of Interest That Should Be Collected And AnalyzedAre Discussed. Finally, The Main Requirements That Such A System Should Comply With ArePresented And Proposed As The Experimental Design.

Paper ID: 251 Title:Earlyinfrastructureofaninternetofthingsinspacesforlearning


Tejal Rachh || Priti Rumao || Bhavnaarora || Nida Parkar

Abstract: The deployment of mobile and ubiquitous computing in smart objects introduces theconcept of an Internet of things which will offer new scenarios for learning processes. This paperpresents this concept in relation with some other new alternatives of spaces for learning. A basicarchitecture for interaction is proposed and a set of prototypes that we have developed are alsoexplained as part of an early infrastructure.

125

ABOUT THE COLLEGE

An ever increasing demand for Technical Education in Maharashtra as a whole and in

Mumbai in particular, has created fierce competition. As a result many meritorious

students are deprived of the opportunity of taking engineering education. A large number

of students are required to migrate from Mumbai to some other University. This results

not only in extra expenditure for the parents but also leads to depression amongst the

students. After careful observations, through Survey of different institutions ‘The Atharva

Educational Trust’ has decided to come forward forthe noble cause of technical Education

and open the new Technical institution which will impart technical education in High –

Tech areas like Computers, Information Technology and Electronics &

Telecommunication, Electronics Engineering.

‘The Atharva Educational Trust’ believes in producing well discipline, practical oriented,

highly knowledgeable Engineers to serve not only for themselves butforthe society and

nation. To makethis dream come true the Trust has developed the infrastructure first and

proved their merit in getting recognition from Govt, of Maharashtra & A.I.C.T.E. New

Delhi, the body for promoting technical education of high quality in India established by

Govt, of India.

The Atharva Educational Trust’ owns spacious campus in Malad, where an ideal

educational ‘Atharva College of Engineering’ campus has grown in leaps and bound in

short span of time. The Institute has started functioning from the academic year 1999-2000

& has achieved good results in the University of Mumbai since then. The institution has

developed laboratories with sophisticated equipments. Learned, disciplined and qualified

staff is going to be another attraction for the students in this institution.

Atharva was established in the year 1999 for the noble cause of Engineering education

in western suburbs.

Presently caters to the need of 800+ students in various branches.

ISO 9001:2000 Certified Institute.

ISO approved by American Quality Assessors (India) Private Limited & Accredited By

ANAB.

AET’s Educational Complex is set up on a gigantic and spacious campus of 6 acres situated

in the heart of Western suburbs at Malad with convenient access by bus / train. With

classic architecture & interiors, beautiful green landscaping and ambience, state-of-the art

infrastructure and other sophisticated equipment, AET Complex is the perfect setting of a

professional environment with a friendly touch to the scene.

ATHARVA EDUCATIONAL TRUST’S


MUMBAI

Approved by AICTE, DTE & Affiliated to University of Mumbai Excellence In Education……

ICIATE 2018 CONFERENCE SOUVENIR ISBN: 978-93-5311-039-0 · 2018-08-02 · The success of this...

Documents

Transcript of ICIATE 2018 CONFERENCE SOUVENIR ISBN: 978-93-5311-039-0 · 2018-08-02 · The success of this...