ICE/BERG ICE/BERG SHELL ICE MACHINEFrom 5 to 50 tons of ice per day MARKETS SERVED

FishingFishingFood ProcessingBakeryProduceMeat & PoultryConcreteChemical ProcessingPlasma Freezing

STANDARD OPTIONSAir Cooled CondenserWater Cooled Condenser (Sea/Fresh Water)Evaporative CondenserAmmonia/Freon Refrigerant220V/480V/575V 50/60h

OVER 30 YEARS OF RELIABLE ICE

220V/480V/575V 50/60hz

MAKING Based on a proven principle of making ice on a tubular evaporator surface and harvesting it by gravity. The robust, rugged design of BERG ice machines allow for a long life with minimum maintenance and guaranteed to satisfy your icewith minimum maintenance and guaranteed to satisfy your ice needs

Berg Chilling Systems Inc., 51 Nantucket Blvd., Toronto, Ontario, Canada, M1P 2N5 416-755-2221 www.berg-group.com

ICE/BERG

BERG- BUILT FOR THE LONG RUNUser friendly CSA/UL/ULC Easy clean and Removable curtain for

ICE/BERG SHELL ICE MACHINE

microprocessor controller

approved electrical panel with indicating lights, operating switches, and emergency stop button

changeable water rings and nozzles

easy inspection and maintenance

Low maintenance stainless steel ice

Optional weather proof panels (Removed for this photo)

Stainless Steel perforated trough for water return and de

evaporator tubes. Tapered design for reliable discharge

Suction Accumulator with a boil out coil

Easily accessible refrigeration

water return and de-watering of the discharge ice

Stainless Steel discharge auger for reducing ice fragments

prevents liquid refrigerant from reaching the compressor

Standard Features

Semi-Hermetic reciprocating compressor

Aluminum frame

refrigeration components External industrial duty

water pump c/w built in strainer and flow control valve

and delivering ice to the ice handling equipment

Standard Features• All components coming in contact with ice and/or water are all manufactured from stainless steel or food

grade plastic• Double Tapered Stainless Steel Evaporator Tubes allow for quick harvest times• Fully tested under load conditions at our plant to ensure ice production meets or exceeds rated capacity• Variable Ice Thickness Settings• Salt or fresh water ice

O ti l th f l t t t th t f th l t• Optional weatherproof panels to protect the components from the elements• Optional Blygold coated fins on air cooled condenser to ensure resistance to corrosion due to salt• atmosphere• Each ice making tube has its own thermal expansion valve to ensure consistent and equal ice production

per tube

Berg Chilling Systems Inc., 51 Nantucket Blvd., Toronto, Ontario, Canada, M1P 2N5 416-755-2221 www.berg-group.com

SHELL ICESHELL ICEThe Better Ice

BERG SHELL ICEThe Ice/Berg shell ice making machine creates a type of ice called Shell Ice (sometimes referred to as cracked ice). Shell ice differentiates itself in its superior usability Shell ice keeps its superiordifferentiates itself in its superior usability. Shell ice keeps its superior handling characteristics for a longer period of time, helping to increase the productivity of the ice handlers.

OperatorThe operator has full control of the thickness of the ice between 1/8” to 5/8” to suit particular requirements.

Maintenance No cutters or scrapers that are susceptible to failure during ice harvestingRugged construction: all components that contact the water/ice are either built from stainless steel or food grade plastic, allowing ice to be made from fresh water or sea water without any changes to the machine

All components that require regular maintenance are easily accessible and removable

Most replacement components are available through local refrigeration contractors and supply houses.

Bottom LineThe major cost contributor when producing ice is the cost of electricity. An Ice/Berg shell ice machine produces ice more efficiently than other ice machines, requiring less electricity per ton of ice to operate.

HOW IT WORKS1. Water cascades over both the inner and outer surfaces of a 6" diameter stainless steel tapered

evaporatorevaporator.2. The water freezes on the surface of the evaporator and builds up to a desired thickness chosen by

the operator.3. Hot gas is introduced into the evaporator which forms a layer of water between the ice and the tube

surface.4. Gravity pulls the ice off the evaporator. A screw conveyor breaks up the ice to its final size.5. Gravity or a mechanical delivery device will deliver ice to storage. The free water is quickly re-frozen

on the surface of the Shell Ice leaving dry and hard ice fragmentson the surface of the Shell Ice leaving dry and hard ice fragments.

Berg Chilling Systems Inc., 51 Nantucket Blvd., Toronto, Ontario, Canada, M1P 2N5 416-755-2221 www.berg-group.com

SPECIFICATIONSSPECIFICATIONS

Air Cooled Specifications

1Capacities are based on 90°F (32°C) ambient2Compressor type: SH- Semi-Hermetic Reciprocating3 Minimum average flow at 15psi (103kPa) and 60°F (16°C)

ICE HANDLING SYSTEMSWe have many customers who not only want the best in ice making machinery, they also want a complete system of conveyors and storage. Conveyors can be either mechanical or pneumatic, or a combination, to move the ice quickly to the point of use.

Berg Chilling Systems Inc., 51 Nantucket Blvd., Toronto, Ontario, Canada, M1P 2N5 416-755-2221 www.berg-group.com