Icc catalog

2

TABLE OF CONTENTSTA

BLE

OF

CO

NTE

NTS

888.ASK.4ICC | [email protected] | icc.com

WORK AREA OUTLETSCAT 6A/6/5e connectors .......04

Integrated VDV outlets ..........10

Audio/Video connectors ......12

Confi gurable faceplates .......18

DecorexTM faceplates .............21

Surface mount jacks ...............24

Mounting boxes ......................27

Surface mount boxes .............28

Mobile patch boxes ...............29

MUTOA outlets .........................30

RACKS & CABLE MANAGEMENT Wall mount racks ....................54

Floor mount racks ...................59

Vertical cable managers .......60

Horizontal cable managers ...62

Plastic rings ..............................64

Metal rings ...............................65

Shelves .....................................66

J-Hooks ....................................68

Ladder Rack ............................70

RESIDENTIAL ENCLOSURESMetal enclosure combos .......96

Plastic enclosure combos .....98

Voice modules ......................102

CAT 6/5e data modules .......103

Video modules ......................104

Multi-media patch panels ...105

Electrical power strip ............105

Electronics bracket ...............105

Cable management covers ..105

PRE-TERMINATED CABLES HiPerLinkTM copper .................118

HiPerLinkTM fi ber optic .............119

PATCH PANELS & CROSS-CONNECTCAT 6A patch panels ............32

CAT 6/5e patch panels .........34

Wall mountable panels .........34

Feed-through panels .............36

Confi gurable blank panels ....37

Telco panels ...........................39

110 wiring blocks ....................40

110 patch panels ...................42

66 wiring blocks .......................44

CORDS & CABLE ASSEMBLIESCAT 6A patch cords ...............72

CAT 6 patch cords .................72

CAT 5e patch cords ...............73

110 patch cords .....................74

Telco cables ...........................75

Modular plugs .........................76

Voice line cords ......................77

Velcro® brand cable ties .........78

Nylon cable ties ......................79

TOOLS & ACCESSORIES JackEasyTM tool .......................106

110/66 punch-down tool ....107

4-Pair punch-down tool ......108

5-Pair punch-down tool ......108

Cable stripping tools ...........109

Crimping tools .......................109

Compression tools ................110

Compression connectors .....111

Wire cutters ...........................112

Raceway cutter ....................112

INDEXPart number index ................120

PREMISE CABLES CAT 6A UTP/FTP ......................48

CAT 6e UTP ...............................48

CAT 6 UTP .................................50

CAT 5e .....................................50

FIBER OPTIC SYSTEM Plug and Play cassettes .........82

Adapters .................................84

Patch panels ..........................85

Rack mount enclosures ..........86

Wall mount enclosures ...........89

Splice trays ..............................90

Couplers ..................................91

MUTOA boxes .........................92

Multimedia outlets .................93

Cable assemblies ..................94

RACEWAY Runway sections ...................114

Compatible outlets...............115

Connecting accessories ......116

Slotted wiring ducts .............117

Solid wiring ducts .................117

WIRING DIAGRAMST568A/B wiring .......................122

ICC is an independent and privately owned California corporation. ICC has been

manufacturing structured cabling products for small and mid-size installers since 1984.

3

HD or EZ®

Faceplates Patch Cords 66 Blocks

High DensityUp to 48-Ports in 1 RMS

EasyEasy to lay wires

HD OutletsDecorexTM and Furniture

EZ® OutletsClassic and Furniture

HD PanelsSingle row ports

EZ® PanelStaggered ports

One Tool For Both

Connectors

Be Green, Buy ValuePacks!We created ValuePacks to shrink storage size, reduce packaging waste, and lower unit cost. Look for

ValuePacks throughout the catalog to save space, save Mother Earth, and save money.

W

OR

K A

RE

A O

UTL

ETS

888.ASK.4ICC | [email protected] | icc.com | MPS

4

WORK AREA OUTLETS CAT 6A CONNECTORS

CAT 6A 10G UTP MODULAR CONNECTORS HD STYLE• Rear split-back IDC

• Shielded termination cap

• 50 micro-inch gold plated contacts

PART NO. DESCRIPTION CARTON / CASE

IC1078GAxx¹ 8P8C, UTP 50 / 400

Color (xx¹) = WH IV BL OR RD BK

0

100

20

40

60

80

0 500

NEXTdB

Frequency (MHz)

PERMANENT LINK PERFORMANCE TEST

Installed with ICC premise cable and tested per TIA Permanent Link specifi cation

0

100

20

40

60

80

0 500

NEXTdB

Frequency (MHz)

CAT 6A 10G FTP MODULAR CONNECTOR HD STYLE• 360O shielding from Electromagnetic Interference and Alien Crosstalk

• Rear split-back IDC



IC1078S6A0 8P8C, FTP 50 / 400

ICACSGK6AS Grounding wire, 18 AWG, 7" length, 10 pcs.


CAT 6A 10G UTP MODULAR COUPLER HD STYLE• No termination required; feed-through the front and rear

• Joins two high performance CAT 6A patch cords



IC107C6Axx¹ 8P8C, UTP 50 / 400

Color (xx¹) = WH BK

TIA standard limit

Headroom

Signal transmission


TIA standard limit

http://www.icc.com/c/19/workstations-outlets

5

WORK AREA OUTLETS CAT 6 CONNECTORS

CAT 6 HD AND EZ® STYLE MODULAR CONNECTORS• Exceeds TIA-568 CAT 6 performance standard

• Built-in PCB technology for maximum signal quality


• Includes a color T568A/B wiring diagram

• Terminate with the JackEasy termination tool


A. IC1078F6xx¹ 8P8C, HD style 50 / 400


B. IC1078L6xx¹ 8P8C, EZ style 50 / 400

• Rear in-line IDC makes seating wires easy

• Pair-to-pair wiring; no splitting

Color (xx¹) = WH IV BL OR RD YL GY BK AL GN PR

CAT 6 MODULAR COUPLER HD STYLE VALUEPACKS• Packaged in a resealable bag for easy storage

• Reduces packaging waste

• 25 pieces per bag

PART NO. DESCRIPTION CARTON / CASE IC107C6Cxx¹ 8P8C, 25 pcs. 10 / 40


A.

B.

CAT 6 MODULAR COUPLERS HD STYLE• No termination required; feed-through the front and rear

• Exceeds TIA-568 CAT 6 performance standard



IC107CP6xx¹ 8P8C 50 / 400


CAT 6 HD AND EZ® STYLE MODULAR CONNECTOR VALUEPACKS• Packaged in a resealable bag for easy storage




A. IC107F6Cxx¹ 8P8C, HD style , 25 pcs. 10 / 40

B. IC107L6Cxx¹ 8P8C, EZ style, 25 pcs. 10 / 40


A.

B.

W

OR

K A

RE

A O

UTL

ETS


6

WORK AREA OUTLETS CAT 5e CONNECTORS

CAT 5e HD AND EZ® STYLE MODULAR CONNECTORS• Exceeds TIA-568 CAT 5e performance standard



• Includes a color T568A/B wiring diagram

• Compatible with VoIP phone systems





B. IC1078E5xx¹ 8P8C, EZ style 50 / 400


• Pair-to-pair wiring; no splitting


CAT 5e MODULAR COUPLERS HD STYLE• No termination required; feed-through the front and rear

• Exceeds TIA-568 CAT 5e performance standard



IC107C5Exx¹ 8P8C 50 / 400


A.

B.

CAT 5e MODULAR COUPLER HD STYLE VALUEPACKS• Packaged in a resealable bag for easy storage



PART NO. DESCRIPTION CARTON / CASE IC107C5Cxx¹ 8P8C, 25 pcs. 10 / 40


CAT 5e HD AND EZ® STYLE MODULAR CONNECTOR VALUEPACKS• Packaged in a resealable bag for easy storage




A. IC107F5Cxx¹ 8P8C, HD style, 25 pcs. 10 / 40

B. IC107E5Cxx¹ 8P8C, EZ style, 25 pcs. 10 / 40


A.

B.


7

WORK AREA OUTLETS VOICE CONNECTORS

VOICE HD AND EZ® STYLE MODULAR CONNECTORS• Supports phone applications

• Compatible with RJ-11 plug

• Accepts category-rated cable and 22~24 AWG solid wire


• Includes a color USOC/UTP wiring diagram





B. IC1076V0xx¹ 6P6C, EZ style 50 / 400



A.

B.

VOICE MODULAR COUPLERS HD STYLE• No termination required; feed-through on the front and rear

• Supports phone applications

• Compatible with RJ-11 plug



IC107C6Sxx¹ 6P6C, Pin 1-6 50 / 400

IC107C6Rxx¹ 6P6C, Pin 1-1 50 / 400

Color (xx¹) = WH IV GY BK

One Vendor, No Compatibility IssueWe fi ne tune premise cables and connectivity

outlets to work together as End-to-End solutions.

Page 46

VOICE HD AND EZ® STYLE MODULAR CONNECTOR VALUEPACKS• Packaged in a resealable bag for easy storage



PART NO. DESCRIPTION CARTON / CASE A. IC1076FCxx¹ 6P6C, HD style, 25 pcs. 10 / 40

B. IC1076VCxx¹ 6P6C, EZ style, 25 pcs. 10 / 40

Color (xx¹) = WH IV

A.

B.

W

OR

K A

RE

A O

UTL

ETS


8

WORK AREA OUTLETS FIBER OPTIC COUPLERS

Snap-in design

FIBER OPTIC COUPLERS IN ELITE™ SURFACE MOUNT BOXES

FIBER OPTIC MODULAR COUPLERS HD STYLE• Female to female coupler

• Feed-through on the front and rear; no termination required

• Designed with ceramic sleeves

• Supports multimode and single-mode


A. IC107LC2xx¹ LC duplex coupler, ceramic sleeves 50 / 400

B. IC107SC2xx¹ SC simplex coupler, ceramic sleeve 50 / 400

C. IC107ST2xx¹ ST simplex coupler, ceramic sleeve 50 / 400


A.

B.

C.

Elite surface mount box

Page 28


9

WORK AREA OUTLETS

B. C. A.

E. Front D.

FIBER OPTIC ELITE™ BEZELS • Fiber couplers are integrated into the bezel

• Designed with metal sleeves

• Install bezels in EliteTM series faceplates, outlets and MUTOA boxes

• Package includes icons

PART NO. DESCRIPTIONA. IC108BFCxx¹ SC duplex to SC duplex, fl atB. IC108BFDxx¹ 2 SC duplex to SC duplex, fl atC. IC108BACxx¹ SC duplex to SC duplex, angledD. IC108BFTxx¹ ST duplex to ST duplex, fl atE. IC108BFRxx¹ SC duplex to ST duplex, fl at


FIBER OPTIC SLIM BEZELS• Fiber couplers are integrated into the bezel

• Install slim bezels inside the bottom of EliteTM multimedia outlets

PART NO. DESCRIPTIONA. ICFOBWLBxx¹ Dual LC duplex to LC duplex, metal sleevesB. ICFOBWCBxx¹ SC duplex to SC duplex, metal sleevesC. ICFOBWTBxx¹ ST duplex to ST duplex, metal sleeves

Color (xx¹) = WH IV GY

B.A.

C.

E. Rear

Elite multimedia outlet

Page 31

ELITE™ MULTIMEDIA OUTLETS AND MUTOA BOXES ARE CONFIGURABLE WITH ELITE BEZELS AND SLIM BEZELS

Slim bezels mount inside the bottom of multimedia outlets allowing fi ber to enter and exit vertically.

Two bezel openings on the front

W

OR

K A

RE

A O

UTL

ETS


10

WORK AREA OUTLETS RESIDENTIAL OUTLETS

Voice Port

Supports:

• Phones

• Fax machines

Retention caps

CAT 5e Data Port

Supports:

• Home networking

• 1 Gigabit per second

• High speed internet

F-Type Port

Supports:

• 2 GHz bandwidth

• Televisions

• Satellite

• Cable

IDC contacts

INTEGRATED FACEPLATES WITH VOICE, CAT 5e DATA AND VIDEO• Integrate all the connectivity into one faceplate

• One-piece design; no assembly required

• Designed with rear 110-Type IDC for fast termination

• Durable ABS plastic body


• Package includes retention caps to secure wiring


A. ICRDSV05xx¹ 6P6C voice and CAT 5e data 25 / 100

B. ICRDSVF0xx¹ 6P6C voice and F-Type video 25 / 100

C. ICRDSVF5xx¹ 6P6C voice, CAT 5e data and F-Type video 25 / 100

D. ICRDSV25xx¹ 6P6C voice, CAT 5e data and 2 F-Type video 25 / 100

E. ICRDS0F5xx¹ CAT 5e data and F-Type video 25 / 100

F. ICRDS2F5xx¹ 2 CAT 5e data and 2 F-Type video 25 / 100

Color (xx¹) = WH IV AL

A.

D.

B.

E.

FACEPLATE FEATURES

INTEGRATED FACEPLATE FEATURESAll ports are embossed to identify applications. All modular connectors have 50 micro inch gold plated contacts for maximum performance.

C.

F.


11

WORK AREA OUTLETS SURFACE MOUNT BOXES

Removable side knockoutsRemovable cover

.30" H

.30" W

Rear cable exit

Snap-in design

Port labeling area

Removable cover

.43" H

.30" W

Rear cable exit

110-Type IDC makes terminating fast

Port labeling areasRemovable side knockouts

SURFACE MOUNT BOX KIT FEATURES

C.

D.

CLASSIC SURFACE MOUNT BOXES KITTED WITH VOICE AND CAT 5e DATA MODULAR CONNECTORS• Comes with a voice or CAT 5e, EZ® style, modular connector

• Connectors are removable

• Package includes adhesive strips and wood screws for mounting

C. IC625S51xx¹ 1-Port box with CAT 5e EZ connectorD. IC625S52xx¹ 2-Port box with 2 CAT 5e EZ connectors

A. IC625SV1xx¹ 1-Port box, with voice EZ connectorB. IC625SV2xx¹ 2-Port box with 2 voice EZ connectors

A.

B.


PART NO. DESCRIPTION

W

OR

K A

RE

A O

UTL

ETS


12

WORK AREA OUTLETS

HDMI MODULAR COUPLERS HD STYLE• Female to female gold plated coupler

• Supports high-defi nition video: 1080p, 3D and HDCP


IC107HDMxx¹ HDMI connector 50 / 400

Color (xx¹) = WH IV BK AL

USB MODULAR COUPLERS HD STYLE• Female to female coupler


A. IC107UAAWH USB coupler, A-to-A 50 / 400

• Supports USB connectivity; backwards compatible

B. IC107UABWH USB coupler, A-to-B 50 / 400

• Supports USB connectivity

• Reversible coupler with either the A or B port facing outward

Color = White

S-VIDEO MODULAR CONNECTORS HD STYLE• Front female connector with rear 110-Type IDC termination

• Rear IDC accepts UTP cable or any 22~24 AWG wire

• Package includes a termination cap to secure wiring


IC107SVIxx¹ S-Video connector 50 / 400


3.5mm STEREO AUDIO PLUG MODULAR COUPLERS HD STYLE• Female to female nickel plated coupler


IC107SACWH 3.5mm coupler, feed-through 50 / 400

Color = White

3.5mm STEREO AUDIO PLUG MODULAR CONNECTORS HD STYLE• Rear push-pins accept UTP cable or any 22~24 AWG wire

• Terminals are marked for correct polarity


IC107SAPxx¹ 3.5mm connector to push pin 50 /400


A. B.


13

WORK AREA OUTLETS

VGA Décorex InsertsConnecting to computer monitors, projectors and fl at screen TV's from the wall outlet.

HDMI DÉCOREX™ INSERTS WITH 2 OPEN HIGH DENSITY PORTS• Female to female gold plated coupler


• Package includes 2 blank modular inserts


IC107DH2xx¹ 1 HDMI coupler, 2 HD ports 25 / 200


DUAL HDMI DÉCOREX INSERTS WITH 2 OPEN HIGH DENSITY PORTS• Female to female gold plated couplers




IC107DDHxx¹ 2 HDMI couplers, 2 HD ports 25 / 200


VGA DÉCOREX INSERTS WITH 2 OPEN HIGH DENSITY PORTS• Female to female 15-Pin VGA coupler

• Supports high quality analog video



IC107DR2xx¹ 1 VGA coupler, 2 HD ports 25 / 200


VGA DÉCOREX INSERTS WITH 4 OPEN HIGH DENSITY PORTS• Female to female 15-Pin VGA coupler

• Supports high quality analog video



IC107DR4xx¹ 1 VGA coupler, 4 HD ports 25 / 200


W

OR

K A

RE

A O

UTL

ETS


14

WORK AREA OUTLETS VIDEO CONNECTORS

F-TYPE VIDEO MODULAR CONNECTOR HD STYLE VALUEPACKS• Packaged in a resealable bag for easy storage



PART NO. DESCRIPTION CARTON / CASE A. IC107BFCWH F-Type nickel plated, 2 GHz, 25 pcs. 10 / 40

B. IC107BGCWH F-Type gold plated, 2 GHz, 25 pcs. 10 / 40

Color = White

F-TYPE VIDEO MODULAR CONNECTORS HD STYLE• Female to female feed-through connector

• Threaded connector to secure connection

• Works with RG-6 and RG-59 coaxial cable


A. IC107B9Fxx¹ F-Type nickel plated, 3 GHz (pictured) 50 / 400

IC107B9Gxx¹ F-Type gold plated, 3 GHz 50 / 400

IC107B5Fxx² F-Type nickel plated, 2 GHz 50 / 400

IC107B5Gxx² F-Type gold plated, 2 GHz 50 / 400

Color (xx¹) = WH IV BK AL Color (xx2) = WH IV GY BK AL

BNC VIDEO MODULAR CONNECTORS HD STYLE• Female to female feed-through nickel plated connector

• Supports CCTV, NTSC Analog video signals and satellite link signals


IC107BNCxx¹ BNC connector, 75 Ohm 50 / 400

IC107B3Gxx¹ BNC connector, 50 Ohm 50 / 400

Color (xx¹) = WH IV BK

A.

A.

B.

F-TYPE VIDEO MODULAR COMPRESSION CONNECTOR HD STYLE• Front female nickel plated connector with rear compression connector

• Rear compression connector works with RG-6 quad shield coaxial cable

• Not compatible with plenum cable


IC107FQGWH F-Type, RG-6Q, blue band 50 / 400

Color = White

BNC VIDEO MODULAR COMPRESSION CONNECTOR HD STYLE• Front female nickel plated connector with rear compression connector




IC107BQCWH BNC, blue band, 75 Ohm 50 / 400

Color = White


15

WORK AREA OUTLETS AUDIO AND VIDEO CONNECTORS

RCA FEMALE-TO-RCA FEMALE MODULAR CONNECTORS HD STYLE• Female to female feed-through connector


A. IC107R6Gxx¹ Red insert (pictured) 50 / 400

IC107G6Gxx¹ Green insert 50 / 400

IC107L6Gxx¹ Blue insert 50 / 400

IC107B6Gxx¹ White insert 50 / 400

IC107Y6Gxx¹ Yellow insert 50 / 400

IC107K6Gxx¹ Black insert 50 / 400


RCA FEMALE-TO-F-TYPE MODULAR CONNECTORS HD STYLE• Front female connector with rear F-Type female connector

• Rear connector works with RG-6 and RG-59 coaxial cable


A. IC107RFGxx¹ Red Insert (pictured) 50 / 400

IC107GFGxx¹ Green Insert 50 / 400

IC107LFGxx¹ Blue Insert 50 / 400

IC107BFGxx¹ White Insert 50 / 400

IC107YFGxx¹ Yellow Insert 50 / 400

IC107KFGxx¹ Black Insert 50 / 400


RCA FEMALE-TO-IDC MODULAR CONNECTORS HD STYLE• Front female connector with rear 110-Type IDC termination

• Rear IDC accepts UTP cable or any 22~24 AWG wire

• Package includes a termination cap to secure wiring


A. IC107R8Gxx¹ Red insert (pictured) 50 / 400

IC107G8Gxx¹ Green insert 50 / 400

IC107L8Gxx¹ Blue insert 50 / 400

IC107B8Gxx¹ White insert 50 / 400

IC107Y8Gxx¹ Yellow insert 50 / 400

IC107K8Gxx¹ Black insert 50 / 400


RCA SOLDER TAIL AND COMPONENT PACK MODULAR CONNECTORS

PART NO. DESCRIPTION A. IC107B7Gxx¹ Solder Tail, Black Insert, HD style

• Front female connector with rear solder tail termination

B. IC107RR5xx2 Female to female connector, HD style, 5 pcs. (pictured) IC107RF5xx2 Front female with rear F-Type female, HD style, 5 pcs. IC107RD5xx2 Front female with rear 110-Type IDC termination, HD style, 5 pcs.

• Includes connectors with 2 red, 1 green, 1 blue and 1 white insert


Color (xx¹) = WH IV AL Color (xx2) = WH IV BK AL

A.

A.

A.

RCA MODULAR COMPRESSION CONNECTORS HD STYLE• Front female nickel plated connector with rear compression connector




A. IC107RQRWH Red insert, blue band (pictured) 50 / 400

IC107RQGWH Green insert, blue band 50 / 400

IC107RQLWH Blue insert, blue band 50 / 400

IC107RQWWH White insert, blue band 50 / 400

IC107RQYWH Yellow insert, blue band 50 / 400

IC107RQKWH Black insert, blue band 50 / 400

Color = White

A.

A. B.

W

OR

K A

RE

A O

UTL

ETS


16

WORK AREA OUTLETS AUDIO SPEAKER CONNECTORS

DUAL FRONT AND BACK AUDIO SPEAKER MODULAR CONNECTORS HD STYLE• Front and rear push buttons

• Black and red push buttons have + and - signs for correct polarity

• Accepts speaker wire up to 16 AWG

• Patented design


IC107DSBxx¹ Front and rear speaker connector 50 / 400


DUAL AUDIO SPEAKER MODULAR CONNECTORS HD STYLE• Front push buttons with rear crimp-on wire connector

• Black and red push buttons have + and - signs for correct polarity


• Patented design


IC107DSCxx¹ Front speaker connector 50 / 400


BINDING POST AUDIO SPEAKER MODULAR CONNECTORS HD STYLE• Front gold plated binding post with female banana plug

• Rear set-screw connection


• Comes in pairs with red and black bands for correct polarity


IC107PMGxx¹ Binding post connectors, gold plated 50 / 400


SPRING CLIP AUDIO SPEAKER MODULAR CONNECTORS HD STYLE

• Front spring clip with rear crimp-on wire connector

• Front accepts speaker wire up to 12 AWG

• Rear accepts speaker wire up to 16 AWG

• Comes in pairs with red and black clips for correct polarity

• Patented design


IC107BSSBK Spring clip connectors 50 / 400

Color = Black

Home Theater SolutionInstall 7.1 surround sound, high

defi nition and component A/V as

well as satellite and cable input in

a DécorexTM quad-gang faceplate.


17

WORK AREA OUTLETS AUDIO AND VIDEO CONNECTORS

A. B. C.

A. B. C.

BINDING POST AUDIO SPEAKER DÉCOREX™ INSERTS• Front gold plated binding post with female banana plug

• Rear set-screw connection


• Red and black bands for correct polarity

PART NO. DESCRIPTION A. ICRDSSBPxx¹ 2 binding postsB. ICRDSDBPxx² 4 binding postsC. ICRDSQBPxx² 8 binding posts

Color (xx¹) = WH IV Color (xx2) = WH IV AL

F-TYPE AND RCA DÉCOREX INSERTS

PART NO. DESCRIPTION A. IC630DSFxx¹ F-Type connectorB. IC630DDFxx¹ 2 F-Type connectors

• Female to female F-Type connector

C. ICRDS3RFxx² F-Type connector and 3 RCA connectors

• Female to female F-Type connector

• 3 RCA female connectors with rear F-Type connectors

• Rear works with RG-6 and RG-59 coaxial cable

Color (xx¹) = WH IV AL Color (xx2) = WH IV

DUST COVER• Works with CAT 6A, CAT 6, CAT 5e and voice

modular connectors and patch panels

• Snaps on the port opening to prevent dust

from entering

PART NO. DESCRIPTIONICACSDCICL Dust cover, 10 pcs.ICACSDCVCL Dust cover, 100 pcs. VALUEPACK

Color = Clear

CABLE FEED-THROUGH MODULAR INSERTS HD STYLE• Allows cable to pass through a 0.30 inch diameter hole


IC107BN2xx¹ Cable feed-through insert, 10 pcs. 75 / 300

Color (xx¹) = WH IV GY AL

A. B. BLANK FILL-IN MODULAR INSERTS HD STYLE• Fills open and unused ports until they are needed

PART NO. DESCRIPTION CARTON / CASE A. IC107BN0xx¹ Blank fi ll-in insert, 10 pcs. 25 / 200

B. IC107BNVxx² Blank fi ll-in insert, 100 pcs. VALUEPACK

Color (xx¹) = WH IV GY BK AL Color (xx2) = WH IV BK

W

OR

K A

RE

A O

UTL

ETS


18

WORK AREA OUTLETS FACEPLATES

CLASSIC CONFIGURABLE FACEPLATES• Flush mount style

• Durable ABS plastic


A. IC107F01xx¹ 1-Port, single gang 25 / 200

B. IC107F02xx¹ 2-Ports, single gang 25 / 200

C. IC107F03xx¹ 3-Ports, single gang 25 / 200

D. IC107F04xx¹ 4-Ports, single gang 25 / 200

E. IC107F06xx¹ 6-Ports, single gang 25 / 200

F. IC107FD8xx¹ 8-Ports, double gang 25 / 100

G. IC107F12xx¹ 12-Ports, double gang 25 / 100

H. IC107FT9xx² 9-Ports, triple gang 25 / 200

I. IC107FT0xx² 12-Ports, triple gang 25 / 100

Color (xx¹) = WH IV GY BK AL Color (xx2) = WH IV GY

A. B. C. D. E.

F. G.

H. I.

Front Rear

Retainer

Classic: Traditional design Stainless Steel: Greater durability, easy-to-clean Angled: Reduces cord bending

CLASSIC CONFIGURABLE FACEPLATE FEATURESWe offer a wide selection of classic faceplates. They are confi gurable with modular connectors, couplers and adapters and are designed to fi t

standard NEMA outlet boxes. Faceplates come in various colors.

A. CLASSIC CONFIGURABLE FACEPLATE VALUEPACKS• Packaged in a resealable box for easy storage


• 25 pieces per box

PART NO. DESCRIPTION A. IC107F1Cxx¹ 1-Port, single gang, 25 pcs. IC107F2Cxx¹ 2-Ports, single gang, 25 pcs. IC107F3Cxx¹ 3-Ports, single gang, 25 pcs. IC107F4Cxx¹ 4-Ports, single gang, 25 pcs.


4.50" H

2.75" W


19


CLASSIC STAINLESS STEEL CONFIGURABLE FACEPLATES• Flush mount style

• Corrosion resistant 304 stainless steel


A. IC107SF1SS 1-Port, single gang 25 / 200

B. IC107SF2SS 2-Ports, single gang 25 / 200

C. IC107SF3SS 3-Ports, single gang 25 / 200

D. IC107SF4SS 4-Ports, single gang 25 / 200

E. IC107SF6SS 6-Ports, single gang 25 / 200

F. IC107DF4SS 4-Ports, double gang 25 / 100

G. IC107DF8SS 8-Ports, double gang 25 / 100

B. C. D. E. A.

F. G.

CLASSIC ANGLED CONFIGURABLE FACEPLATES• Angled ports help reduce cable stress

• Flush mount style



A. IC107DA1xx¹ 1-Port angled, single gang 25 / 200

B. IC107DA2xx¹ 2-Ports angled, single gang 25 / 200

C. IC107AF2xx² 1-Port fl at, 1-Port angled, single gang 25 / 200

D. IC107DA4xx¹ 4-Ports angled, single gang 25 / 200

E. IC107AF4xx² 2-Ports fl at, 2-Ports angled, single gang 25 / 200

F. IC107AF8xx² 4-Ports fl at, 4-Ports angled, double gang 25 / 200


A. B. C. D. E.

F.

CLASSIC OVERSIZED CONFIGURABLE FACEPLATES• Designed to cover uneven and oversized drywall cuts

• Larger than standard faceplates




A. IC107LF1xx¹ 1-Port, single gang 25 / 200

B. IC107LF2xx¹ 2-Ports, single gang 25 / 200

C. IC107LF3xx¹ 3-Ports, single gang 25 / 200

D. IC107LF4xx¹ 4-Ports, single gang 25 / 200

E. IC107LF6xx¹ 6-Ports, single gang 25 / 200


B. C. D. E. A.

3.12" W

4.87" H

W

OR

K A

RE

A O

UTL

ETS


20


A. B. C. D. E.

F. G.

A. B. C. D. E.

A. B. C.

CLASSIC ANGLED CONFIGURABLE FACEPLATES WITH STATION ID• Angled ports help reduce cable stress



• Package includes paper labels and clear view covers


A. IC107AS2xx¹ 1-Port fl at, 1-Port angled, single gang 25 / 200

B. IC107AS4xx¹ 2-Ports fl at, 2-Ports angled, single gang 25 / 200

C. IC107AS8xx¹ 4-Ports fl at, 4-Ports angled, double gang 25 / 200


CLASSIC CONFIGURABLE FACEPLATES WITH STATION ID• Flush mount style




A. IC107S01xx¹ 1-Port, single gang 25 / 200

B. IC107S02xx¹ 2-Ports, single gang 25 / 200

C. IC107S03xx¹ 3-Ports, single gang 25 / 200

D. IC107S04xx¹ 4-Ports, single gang 25 / 200

E. IC107S06xx¹ 6-Ports, single gang 25 / 200

F. IC107SD8xx¹ 8-Ports, double gang 25 / 100

G. IC107ST9xx¹ 9-Ports, triple gang 25 / 100


CLASSIC STAINLESS STEEL CONFIGURABLE FACEPLATES WITH STATION ID• Flush mount style




A. IC107S01SS 1-Port, single gang 25 / 200

B. IC107S02SS 2-Ports, single gang 25 / 200

C. IC107S03SS 3-Ports, single gang 25 / 200

D. IC107S04SS 4-Ports, single gang 25 / 200

E. IC107S06SS 6-Ports, single gang 25 / 200

THREE STYLES OF CONFIGURABLE FACEPLATES

Station ID ElectricalDécorex

Accept labels up to

1.70” W x 0.40” H

HDMI DécorexTM Inserts


21


A. B. C. D. E. F.

A. B. C.

A. B.

A. B. C. D.

D.

DÉCOREX CONFIGURABLE FACEPLATES • Faceplates are confi gurable with Décorex inserts



A. IC107DFSxx¹ 1-Insert space, single gang 25 / 200

B. IC107DFDxx¹ 2-Insert spaces, double gang 25 / 200

C. IC107DFTxx¹ 3-Insert spaces, triple gang 50 / 200

D. IC107DFQxx¹ 4-Insert spaces, quad gang 25 / 100


DÉCOREX STAINLESS STEEL CONFIGURABLE FACEPLATES • Faceplates are confi gurable with Décorex inserts



A. IC107DFSSS 1-Insert space, single gang 25 / 100

B. IC107DFDSS 2-Insert spaces, double gang 25 / 100

ELECTRICAL CONFIGURABLE FACEPLATES & INSERTS• Durable ABS plastic


A. IC106FP2xx¹ 2-Ports, single gang faceplate 25 / 500

B. IC106FP4xx² 4-Ports, double gang faceplate 25 / 250

• Faceplates are confi gurable with electrical inserts

C. IC107DPIxx¹ 2-Ports, insert 50 / 400

D. IC1074PIxx¹ 4-Ports, insert; works with HD style connectors only 50 / 400

• Inserts are confi gurable with modular connectors


DÉCOREX™ CONFIGURABLE INSERTS• Inserts are confi gurable with modular connectors



A. IC107DI1xx¹ 1-Port 50 / 400

B. IC107DI2xx¹ 2-Ports 50 / 400

C. IC107DI3xx¹ 3-Ports 50 / 400

D. IC107DI4xx¹ 4-Ports; works with HD style connectors only 50 / 400

E. IC107DI6xx¹ 6-Ports; works with HD style connectors only 50 / 400

F. IC630DIBxx² Blank insert 50 / 400

Color (xx¹) = WH IV BK AL Color (xx2) = WH IV

For Electrical Floor BoxesElectrical inserts are confi gurable with voice, data, audio, video and fi ber optic modular connectors. They can also be installed in NEMA electrical boxes on the fl oor.

HD style

W

OR

K A

RE

A O

UTL

ETS


22

WORK AREA OUTLETS

A. B.

A. B.

A. B. C.

RECESSED CONFIGURABLE TELEPHONE WALL PLATES• Designed with standoffs to mount phones on walls and vertical surfaces

• Recessed style

• Use color ID caps for a clean appearance


A. IC107FRWSS 1-Port, single gang, stainless steel 25 / 200

B. IC107FRWxx¹ 1-Port, single gang, ABS plastic 25 / 200


RECESSED CONFIGURABLE TELEPHONE WALL PLATES• Designed with standoffs to mount phones on walls and vertical surfaces

• Recessed style


• Use color ID caps for a clean appearance


IC107FWPxx¹ 1-Port, single gang 25 / 200 Color (xx¹) = WH IV BK AL

FLUSH CONFIGURABLE TELEPHONE WALL PLATES• Designed with standoffs to mount phones on walls and vertical surfaces



A. IC107FFWSS 1-Port, single gang, stainless steel 25 / 200

B. IC107FFWxx¹ 1-Port, single gang, ABS plastic 25 / 200


BLANK FACEPLATES• Covers open and unused wall outlets until needed


A. IC630EBSSS Blank, single gang, stainless steel 25 / 200

B. IC630EB0xx¹ Blank, single gang, ABS plastic 25 / 200

C. IC630EBDxx¹ Blank, double gang, ABS plastic 25 / 100


Blank Faceplates


23

WORK AREA OUTLETS

A. B.

BULK NOSE FACEPLATES• Faceplates are molded with large opening

• Allows bulky cable to pass through the wall outlet



A. IC640BSSxx¹ Single gang 15 / 120

• 1.25" W x 0.90" D opening

B. IC640BDSxx¹ Double gang 10 / 80

• 2.75" W x 1.15" D opening


INTERNATIONAL CONFIGURABLE FACEPLATES• Works with international wall outlet dimensions

• Spring loaded shutters in ports, prevent dust from entering

• Recessed areas above and below ports for easy labeling


A. IC107EF1WH 1-Port, 86 mm H x 86 mm W 25 / 200

B. IC107EF2WH 2-Ports, 86 mm H x 86 mm W 25 / 200

Color = White

EURO STYLE CONFIGURABLE ELITE™ MULTIMEDIA BOXES• Works with international European wall outlet dimensions

• Two-piece design, faceplate and mounting box

• Confi gurable with Elite bezels

• Box is designed with knockouts to work with raceway systems

• Package includes paper labels, clear view covers and mounting screws

PART NO. DESCRIPTIONIC108CE1xx¹ 1-Bezel opening, 83.5 mm H x 83.5 mm W x 55.626 mm D


A.

B.

Bulk Nose Faceplates

W

OR

K A

RE

A O

UTL

ETS


24

WORK AREA OUTLETS SCREW TERMINAL OUTLETS

Removable side knockouts

Wiring diagram is molded under the cover

Double washers so wires will not unwind

WALL PLATES INTEGRATED WITH VOICE AND VIDEO• One-piece design; no assembly required

• Designed with rear Phillips screw down terminals



A. IC630E60xx¹ 6P6C, single gang 25 / 200

B. IC630E66xx¹ 2 6P6C, single gang 25 / 200

C. IC630EG0xx¹ F-Type, single gang 25 / 200

D. IC630EGGxx¹ 2 F-Type, single gang 25 / 200

E. IC630E6Gxx¹ 6P6C and F-Type, single gang 25 / 200


SURFACE MOUNT JACKS INTEGRATED WITH VOICE• Two-piece design; cover and base

• Wiring diagram is molded under the cover

• Designed with a keyed RJ31X jack with shorting bar




A. IC635DS4xx¹ 8P4C 75 / 300

B. IC635DS8xx¹ 8P8C 75 / 300


SURFACE MOUNT JACKS INTEGRATED WITH VOICE• Two-piece design; cover and base

• Wiring diagram is molded under the cover




A. IC625SB6xx¹ 6P6C 100 / 400

B. IC625SB8xx¹ 8P8C 100 / 400


A. B. C. D. E.

SCREW DOWN TERMINATION FEATURESWall plates, surface mount jacks and DécorexTM inserts are designed with deep slotted Phillips screw heads to provide a traditional way to terminate wires.

A. B.

Deep slotted and fl at Phillips screws will not slip

when using automatic screw drivers

A. B.


25

WORK AREA OUTLETS

DÉCOREX INSERTS INTEGRATED WITH VOICE AND VIDEO• Designed with rear Phillips screw down terminals



A. IC630DI6xx¹ 6P6C 25 / 200

B. IC630DD6xx¹ 2 6P6C 50 / 400

C. IC630DVFxx¹ 6P6C and F-Type 25 / 200


TELEPHONE WALL PLATES INTEGRATED WITH VOICE• Designed with standoffs to mount phones on walls and vertical surfaces




IC630DB6xx¹ 6P6C, single gang 25 / 200


TELEPHONE WALL PLATES INTEGRATED WITH VOICE• Designed with standoffs to mount phones on walls and vertical surfaces


• Package includes 110 punch-down termination tool


A. IC630DA6SS 6P6C, single gang, stainless steel 25 / 200

B. IC630SS6xx¹ 6P6C, single gang, ABS plastic 25 / 200


A. B. C.

A. B.

Telephone Wall PlatesDesigned with mounting standoffs so phones can be hung securely on the wall.

Page 22 and 25

W

OR

K A

RE

A O

UTL

ETS


26

WORK AREA OUTLETS FURNITURE FACEPLATES

CONFIGURABLE UNIVERSAL MODULAR FURNITURE FACEPLATES WITH ADJUSTABLE LOCKING TABS• Two-piece design, faceplate and mounting box

• Faceplates are confi gurable with EZ® and HD style connectors

• Package includes wood screws for mounting

Adjustable 2.0" to 3.5" WPART NO. IC108UF4xx¹

Adjustable 0.875" to 2.375" H

Station ID 1.76" D

CONFIGURABLE MODULAR FURNITURE FACEPLATES• Fits in offi ce furniture with TIA size openings

• Faceplates are confi gurable with EZ® and HD style connectors

PART NO. IC107FM3xx¹

EZ modular connectors

1.30" HPort labeling areas

2.56" W0.19" D

CONFIGURABLE HIGH DENSITY TIA MODULAR FURNITURE FACEPLATES• Fits in offi ce furniture with TIA size openings

• Faceplates are confi gurable with HD style connectors only

PART NO. IC107FT4xx¹

Station ID 2.60" W

1.33" H

0.19" D

Port labeling areas

HD modular connectors

PART NO. IC107FN4xx¹

CONFIGURABLE HIGH DENSITY NEMA MODULAR FURNITURE FACEPLATES• Fits in offi ce furniture with NEMA size openings

• Faceplates are confi gurable with HD style connectors only

1.83" HPort labeling areas

HD modular connectors

Station ID0.19" D

2.60" W

2.34" to 3.50" W

0.82" to 1.93" H


GY


GY


GY


GY


27

WORK AREA OUTLETS MOUNTING BOXES

LOW-PROFILE MOUNTING BOXES• Works with wall plates and Décorex inserts with screw-down terminals only



PART NO. DESCRIPTIONIC250MBSxx¹ Single gang, 4.5" H x 2.75" W x 0.93" D


JUNCTION BOXES• Two-piece design; mounting box and base



• Package includes cable ties for cable management

PART NO. DESCRIPTIONA. ICACSMBSxx¹ Single gang, 4.5" H x 2.75" W x 1.89" DB. ICACSMBDxx¹ Double gang, 4.5" H x 4.6" W x 1.89" D


MOUNTING BOXES• Durable ABS plastic



PART NO. DESCRIPTIONA. IC107MRSxx¹ Single gang, 4.5" H x 2.75" W x 1.89" DB. IC107MRDxx¹ Double gang, 4.5" H x 4.6" W x 1.89" D


A. B.

A. B.

MOUNTING AND JUNCTION BOX FEATURESMounting and junction boxes fi t standard NEMA outlet boxes. They work with single and double gang faceplates. Designed with routing posts,

cable tie points and knockouts to work with raceway systems.

Mounting boxes: Cables need to be pulled

through the box prior to mounting.

Junction boxes: Bases and raceway can be

mounted prior to cable pulling.

Routing postsKnockout

W

OR

K A

RE

A O

UTL

ETS


28

WORK AREA OUTLETS SURFACE MOUNT BOXES

SURFACE MOUNT BOX FEATURESClassic and EliteTM surface mount boxes are confi gurable with HD and EZ® style modular connectors.

A. CLASSIC CONFIGURABLE SURFACE MOUNT BOX VALUEPACKS• Packaged in a resealable box for easy storage



PART NO. DESCRIPTION A. IC107BC1xx¹ 1-Port, 25 pcs. IC107BC2xx¹ 2-Ports, 25 pcs.


CLASSIC CONFIGURABLE SURFACE MOUNT BOXES• Two-piece design; cover and base



PART NO. DESCRIPTION A. IC107SB1xx¹ 1-PortB. IC107SB2xx¹ 2-PortsC. IC107SB4xx² 4-PortsD. IC107SB6xx² 6-PortsE. IC107SBTxx² 12-Ports, 1 station ID, works with raceway and magnets

Color (xx¹) = WH IV GY BK Color (xx2) = WH IV BK

A. B. C.

D. E.

ELITE™ CONFIGURABLE SURFACE MOUNT BOXES• Two-piece design; cover and base

• Designed to work with raceway and magnets




PART NO. DESCRIPTION A. IC108SB1xx¹ 1-PortB. IC108SB2xx¹ 2-PortsC. IC108SB4xx¹ 4-Ports, includes cable tiesD. IC108SB6xx¹ 6-Ports, includes cable ties


C. A.

B. D.

Magnets (optional) Cable tie anchor pointsRemovable cover

Elite boxes and 12-Port classic box work with raceway

Classic 2-Port box Classic 12-Port box Elite 4-Port box


29

WORK AREA OUTLETS MOBILE PATCH BOXES

6-PORT CONFIGURABLE MOBILE PATCH BOX• Two-piece design; cover and base

• Box is confi gurable with modular connectors




PART NO. DESCRIPTIONIC107MB6BK 6-Ports blank

6-PORT CAT 6 AND CAT 5e MOBILE PATCH BOXES• Two-piece design; cover and base



• Exceeds TIA-568 CAT 6 and CAT 5e performance standards




PART NO. DESCRIPTIONA. ICMPPMB606 CAT 6, 8P8C, 6-PortsB. ICMPPMB506 CAT 5e, 8P8C, 6-Ports

A.

B.

METAL AND ADHESIVE MAGNETS• To mount boxes on fl at metal surfaces

PART NO. DESCRIPTION A. ICMAGBLOCK Metal magnet, 2 pcs.

• Works with boxes designed with magnet holders

B. IC317MTAPE Adhesive magnet, 2 pcs.

• Magnetic front with rear adhesive tape

• Works with all boxes

A. B.

Confi gurable Integrated

MOBILE PATCH BOX FEATURESMobile patch boxes allow connectivity in open environments where outlet is unavailable. Use for temporary workstations, POS terminals, warehouses,

industrial environment, tradeshows, retail showrooms and more.

Universal T568A and T568B wiring Strain relief

Magnets (optional)

Dust covers

Snap-in design

Magnets (optional)

W

OR

K A

RE

A O

UTL

ETS


30

WORK AREA OUTLETS ELITE FACEPLATES AND OUTLETS

FLAT AND ANGLED ELITE™ BEZELS• Install bezels in EliteTM series faceplates, outlets and MUTOA boxes




IC108BF1xx¹1-Port, fl at

IC108BF2xx¹2-Ports, fl at

IC108BA1xx¹1-Port, angled

IC108BA2xx¹2-Ports, angled

IC108BFBxx¹Blank, fl at

MULTI-USER TELECOMMUNICATIONS OUTLET ASSEMBLY (MUTOA) ELITE™ MULTIMEDIA BOXESPackage includes:

• Cover and base

• Cable ties for cable management

• Paper labels and clear view covers

• Adhesive strips and wood screws for mounting


8.50" W

8.67" H

2.41" D

1-Bezel opening

Circuit identifi cation label

6-Bezel openings

Knockouts on top and bottom work with raceway

Magnets (optional)

PART NO. DESCRIPTIONIC108MMBxx¹ MUTOA multimedia box with 7 Elite bezel openings

SINGLE AND DOUBLE GANG ELITE™ FACEPLATES WITH STATION ID Color (xx¹) = WH IV


IC108F01xx¹1-Bezel opening

IC108F02xx¹2-Bezel openings

IC108FD4xx¹4-Bezel openings

Confi gurable with

EliteTM bezels


31

WORK AREA OUTLETS ELITE FACEPLATES AND OUTLETS

SINGLE GANG ELITE™ MULTIMEDIA OUTLETSPackage includes:

• Cover and base



• Wood screws for mounting

DOUBLE GANG ELITE™ MULTIMEDIA OUTLETSPackage includes:

• Cover and base





6" W1" D3 slim bezel openings

4-Bezel openings


4.45" W

7.50" H

1" D

PART NO. DESCRIPTIONIC108WBDxx¹ Double gang multimedia outlet with 4 Elite and 3 slim bezel openings

PART NO. DESCRIPTIONIC108WBSxx¹ Single gang multimedia outlet with 2 Elite and 2 slim bezel openings

2 slim bezel openings

2-Bezel openings

Fits single gang outlet

Fits double gang outlet

Confi gurable with EliteTM bezels

7.50" H

PA

TCH

PA

NE

LS &

CR

OS

S-C

ON

NE

CT

32

PATCH PANELS & CROSS-CONNECT

888.ASK.4ICC | [email protected] | icc.com | CXS

CAT 6A PATCH PANELS

CAT 6A 10G UNSHIELDED TWISTED PAIR (UTP) PATCH PANEL• Permanent Link performance tested up to 7.3dB headroom at 500 MHz

• Panel comes with 24 CAT 6A UTP HD style black modular connectors


• Fits standard 19” EIA rack mount widths

• Package includes cable management bar, cable ties and #12 rack screws

PART NO. DESCRIPTION ICMPP246AU 24-Port CAT 6A UTP patch panel, 1 RMS*

CAT 6A 10G FOILED TWISTED PAIR (FTP) PATCH PANEL• Permanent Link performance tested up to 2.8dB headroom at 500 MHz

• FTP provides excellent protection against EMI/RFI interferences

• Panel comes with 24 CAT 6A FTP HD style modular connectors


• Pre-installed grounding studs


• Package includes cable management bar, cable ties and #12 rack screws

PART NO. DESCRIPTION ICMPP246AS 24-Port CAT 6A FTP patch panel, 1 RMS*

0

100

20

40

60

80

0 500

NEXTdB

Frequency (MHz)



0

100

20

40

60

80

0 500

NEXTdB

Frequency (MHz)



*1 RMS (rack mount space) = 1.75" H

TIA standard limit

Headroom

Signal transmission

TIA standard limit

http://www.icc.com/c/20/patch-panels-cross-connect

33

PATCH PANELS & CROSS-CONNECT PATCH PANEL FEATURES

HORIZONTAL PATCH PANEL FEATURES• Exceeds TIA-568 performance standards


• 50 micro-inch gold plated contacts Nylon cable ties

Color wiring diagram makes termination fast and easy

4-Pair punch-down tool

VERTICAL ZERO-U PATCH PANEL FEATURES• Designed to mount on walls and distribution racks, uses no rack space

• Exceeds TIA-568 performance standards



Retention caps

Purchased separately

Rear 110-Type IDC

FRONT ACCESS ZERO-U PATCH PANEL FEATURES• Designed to mount on walls and distribution racks, uses no rack space

• Exceeds TIA-568 performance standards

• Front access 110-Type IDC terminations


• Designed for wall mount

• Removable cover

PA

TCH

PA

NE

LS &

CR

OS

S-C

ON

NE

CT

34



CAT 6 AND CAT 5e PATCH PANELS

DUST COVER• Works with CAT 6A, CAT 6, CAT 5e and voice modular

connectors and patch panels

• Snaps on the port opening to prevent dust from entering


Color = Clear

CAT 6 AND CAT 5e 12-PORT FRONT ACCESS ZERO-U PATCH PANELS• Two-piece design; patch panel with removable cover

• Front access 110-Type IDC terminations

• Designed to mount on walls and distribution racks, uses no rack space

PART NO. DESCRIPTION CARTON

ICMPP12F6E CAT 6, 12-Ports, 8P8C, front access 10

ICMPP12F5E CAT 5e, 12-Ports, 8P8C, front access 10


CAT 6 AND CAT 5e 24-PORT PATCH PANEL• Fits standard 19” EIA rack mount widths

• Package includes cable ties and #12 rack screws


ICMPP02460 CAT 6, 24-Ports, 8P8C, 1 RMS* 16

ICMPP0245E CAT 5e, 24-Ports, 8P8C, 1 RMS* 16

CAT 6 AND CAT 5e 12-PORT VERTICAL ZERO-U PATCH PANELS• Two-piece design; patch panel with 89D mounting bracket


• 10” H x 3.30” W x 2.40” D



ICMPP12V60 CAT 6, 12-Ports, 8P8C 25

ICMPP12V5E CAT 5e, 12-Ports, 8P8C 25

CAT 6 AND CAT 5e 48-PORT PATCH PANEL• Fits standard 19” EIA rack mount widths



ICMPP04860 CAT 6, 48-Ports, 8P8C, 2 RMS* 10

ICMPP0485E CAT 5e, 48-Ports, 8P8C, 2 RMS* 10


35

PATCH PANELS & CROSS-CONNECT VOICE PATCH PANELS

VOICE 24-PORT USOC PATCH PANEL• Fits standard 19” EIA rack mount widths



ICMPP024U6 24-Ports, 6P6C, USOC wiring, 1 RMS* 15

VOICE 12-PORT USOC VERTICAL ZERO-U PATCH PANEL• Two-piece design; patch panel with 89D mounting bracket


• 10” H x 3.30” W x 2.40” D



ICMPP012U6 12-Ports, 6P6C, USOC wiring 25

VOICE 48-PORT USOC PATCH PANEL• Fits standard 19” EIA rack mount widths



ICMPP048U6 48-Ports, 6P6C, USOC wiring, 2 RMS* 10

PATCH PANEL CABLE MANAGEMENT BAR• Mount on rear of 19" rack mount patch panels

• Works with CAT 6, CAT 5e and voice patch panels

• Designed to support terminated cable



ICMPP25CMB Cable management bar 40


PATCH PANEL COLOR ICONS• Apply to patch panels for system administration

• Icons are molded with text identifi cation

• 12 icons per tree

PART NO. DESCRIPTIONICMPPSCIxx¹ 6 voice and 6 data iconsICMPPICDxx¹ 12 data iconsICMPPICVxx¹ 12 voice icons

Color (xx¹) = WH IV BL OR RD YL GY GN PR

PA

TCH

PA

NE

LS &

CR

OS

S-C

ON

NE

CT

36



FEED-THROUGH PATCH PANELS

HIGH DENSITY PATCH PANELS WITH CAT 6 FEED-THROUGH MODULAR COUPLERS• Fits standard 19” EIA rack mount widths

• 24 modular couplers pre-installed

• Package includes #12 rack screws

PART NO. DESCRIPTION ICMPP24CP6 24-Ports, CAT 6, 8P8C,1 RMS* ICMPP48CP6 48-Ports, CAT 6, 8P8C, 2 RMS*

48-PORT HIGH DENSITY PATCH PANEL WITH CAT 6 AND CAT 5e FEED-THROUGH MODULAR COUPLERS• Fits standard 19” EIA rack mount widths



PART NO. DESCRIPTION ICMPP48C61 48-Ports, CAT 6, 8P8C,1 RMS* ICMPP48C51 48-Ports, CAT 5e, 8P8C, 1 RMS*

HIGH DENSITY PATCH PANELS WITH CAT 5e FEED-THROUGH MODULAR COUPLERS• Fits standard 19” EIA rack mount widths



PART NO. DESCRIPTION ICMPP24CP5 24-Ports, CAT 5e, 8P8C,1 RMS* ICMPP48CP5 48-Ports, CAT 5e, 8P8C, 2 RMS*

FEED-THROUGH PATCH PANEL FEATURES

Connect patch cords on both ends

• CAT 6 or CAT 5e modular couplers pre-installed


No assembly and no termination is required


37

PATCH PANELS & CROSS-CONNECT BLANK PATCH PANELS


CONFIGURABLE HIGH DENSITY BLANK PATCH PANEL• Panel is confi gurable with HD style modular connectors

PART NO. DESCRIPTIONIC107BP481 48-Ports blank, 1 RMS*

CONFIGURABLE CAT 6A UTP BLANK PATCH PANEL• Panel is confi gurable with CAT 6A UTP modular connectors

PART NO. DESCRIPTION IC107PPU6A 24-Ports blank, 1 RMS*

CONFIGURABLE CAT 6A FTP BLANK PATCH PANEL• Panel is confi gurable with CAT 6A FTP modular connectors

PART NO. DESCRIPTIONIC107PPS6A 24-Ports blank, 1 RMS*

CONFIGURABLE HIGH DENSITY BLANK PATCH PANEL• Panel is confi gurable with HD style modular connectors

PART NO. DESCRIPTIONIC107BP241 24-Ports blank, 1 RMS*IC107BP482 48-Ports blank, 2 RMS*

CONFIGURABLE BLANK PATCH PANEL• Panel is confi gurable with EZ style modular connectors

PART NO. DESCRIPTIONIC107BE241 24-Ports blank, 1 RMS*

PA

TCH

PA

NE

LS &

CR

OS

S-C

ON

NE

CT

38



VERTICAL BLANK PATCH PANELS

CONFIGURABLE WALL MOUNT VERTICAL ZERO-U BLANK PATCH PANEL• Two-piece design; patch panel with 89U mounting bracket

• Panel is confi gurable with EZ® style modular connectors

• 10” H x 3.30” W x 2.80” D


IC107BP8VB 8-Ports blank 30

CONFIGURABLE HIGH DENSITY WALL MOUNT VERTICAL ZERO-U BLANK PATCH PANEL• Two-piece design; patch panel with 89U mounting bracket

• Panel is confi gurable with HD style modular connectors only

• 10” H x 3.30” W x 2.80” D


IC107BP12V 12-Ports blank 30

VERTICAL ZERO-U BLANK PATCH PANEL FEATURES• Vertical patch panels are designed to mount on walls and distribution racks, uses no rack space

• They provide a fl exible solution suitable as a Consolidation Point in the Work Area

• Mounting bracket acts as a channel for routing cable behind the termination

12-Port HD styleFront view Rear view

8-Port EZ styleFront view Rear view


39

PATCH PANELS & CROSS-CONNECT TELCO PATCH PANELS

VOICE 8P4C PATCH PANELS WITH REAR TELCO CONNECTORS• Fits standard 19” EIA rack mount widths



ICMPP24T4C 24-Ports, active pins: 3/4 and 5/6, 1 RMS* 15

ICMPP48T4C 48-Ports, active pins: 3/4 and 5/6, 2 RMS* 15

• Male 50-Pin Telco connector(s) on the rear

ICMPP24TF4 24-Ports, active pins: 3/4 and 5/6, 1 RMS* 15

ICMPP48TF4 48-Ports, active pins: 3/4 and 5/6, 2 RMS* 15

• Female 50-Pin Telco connector(s) on the rear




ICMPP24T2C 24-Ports, active pins: 4 and 5, 1 RMS* 15

ICMPP48T2C 48-Ports, active pins: 4 and 5, 2 RMS* 10


ICMPP24TF2 24-Ports, active pins: 4 and 5, 1 RMS* 15

ICMPP48TF2 48-Ports, active pins: 4 and 5, 2 RMS* 10





ICMPP024T2 24-Ports, active pins: 3 and 4, 1 RMS* 15

ICMPP048T2 48-Ports, active pins: 3 and 4, 2 RMS* 10


ICMPPTF242 24-Ports, active pins: 3 and 4, 1 RMS* 15

ICMPPTF482 48-Ports, active pins: 3 and 4, 2 RMS* 10





ICMPP024T4 24-Ports, active pins: 3/4 and 2/5, 1 RMS* 15

ICMPP048T4 48-Ports, active pins: 3/4 and 2/5, 2 RMS* 10


ICMPPTF244 24-Ports, active pins: 3/4 and 2/5, 1 RMS* 15

ICMPPTF484 48-Ports, active pins: 3/4 and 2/5, 2 RMS* 10



Male Telco Connector Female Telco Connector

PA

TCH

PA

NE

LS &

CR

OS

S-C

ON

NE

CT

40



110 WIRING

CAT 5e 110 WIRING BLOCK KITS


IC110W1004 100-Pair wiring block kit 10

• 100-Pair base with feet

• Package includes 20 4-Pair and 4 5-Pair 110 connecting blocks

IC110W3004 300-Pair wiring block kit 5

• 300-Pair base with feet


CAT 6 110 WIRING BLOCK KIT• 96-Pair base with feet

• Package includes 24 4-Pair 110 connecting blocks


IC110WK966 96-Pair wiring block kit 10

110 WIRING BLOCKS WITH FEET


IC110WF100 100-Pair wiring block 10

IC110WF300 300-Pair wiring block 5

110 WIRING BLOCKS WITHOUT FEET


IC110NF100 100-Pair wiring block 40

IC110NF300 300-Pair wiring block 10

110 CABLE MANAGEMENT BLOCKS• Works with 110 wiring blocks

• Helps organize cable


A. IC110CMBWF Block with feet 25

B. IC110CMBNF Block without feet 50

A.

B.


41

PATCH PANELS & CROSS-CONNECT 110 WIRING

110 HINGED WIRING BLOCK• 100-Pair hinged base

• Hinge design allows access to the rear of the block


IC110WH100 100-Pair hinged wiring block 10

CAT 5e 110 HINGED WIRING BLOCK KIT• 100-Pair hinged base

• Hinge design allows access to the rear of the block



IC110H1004 100-Pair hinged wiring block kit 10

110 HINGED CABLE MANAGEMENT BLOCK• Works with 110 hinged wiring blocks

• Hinge design allows access to the rear of the cable channel



IC110WHCMS Hinged cable management block 25

110 WIRING LABEL HOLDERS• Use with 110 wiring blocks

• Holds and protects labels

PART NO. DESCRIPTION IC110LHLDR Label holders, 6 pcs.

110 WIRING SYSTEM FEATURES• High performance solution for phone and data communications

• Ideal in a Telco Room, Main Distribution Frame, Intermediate

Distribution Frame and Consolidation Point

PA

TCH

PA

NE

LS &

CR

OS

S-C

ON

NE

CT

42



110 WIRING

RACK MOUNT 110 WIRING BLOCK PANELS• Works with 3-Pair, 4-Pair and 5-Pair connecting blocks


• Package includes labels, label holders and #12 rack screws


A. IC110RM100 100-Pair wiring block, 1 RMS* 15

• 100-Pair base with steel panel

B. IC110RM200 300-Pair wiring block, 2 RMS* 10

• 300-Pair base with steel panel

CAT 6 RACK MOUNT 110 WIRING BLOCK PANEL KIT• 96-Pair base with steel panel


• Package includes 24 4-Pair 110 connecting blocks

• Package includes labels, label holders and #12 rack screws


IC110PRK61 96-Pair wiring block kit, 1 RMS* 15

RACK MOUNT 110 CABLE MANAGEMENT PANEL• Plastic clips with steel panel




IC110RMCMB 110 cable management panel, 1 RMS* 15


A.

B.

Connect 110 Systems with 110 Patch Cords

110 patch cords

Page 74


43

PATCH PANELS & CROSS-CONNECT 110 WIRING

110 PATCH PLUGS

PART NO. DESCRIPTION A. ICMP1101PR Terminates 1-Pair of CAT 5e cableB. ICMP1102PR Terminates 2-Pairs of CAT 5e cableC. ICMP1103PR Terminates 3-Pairs of CAT 5e cableD. ICMP1104PR Terminates 4-Pairs of CAT 6 cable

• Terminate with solid or stranded UTP cable

A. B.

C. D. Termination tools

Page 107

110 CONNECTING BLOCKS• Works with 110 wiring blocks

• Supports Category 5e data

• Terminate with 22~26 AWG solid or stranded wires

• Color coded for easy termination


A. IC110CB4PR 4-Pair, 10 pcs. 300

B. IC110CB5PR 5-Pair, 10 pcs. 320

C. IC110CB4PC 4-Pair, 100 pcs. VALUEPACKD. IC110CB5PC 5-Pair, 100 pcs. VALUEPACK

110 RETENTION CAP• Secures and protects terminated wires

• Works with 110 connecting blocks and patch panels



IC110TC450 4 Conductor, 2-Pair, 110 retention cap, 50 pcs. 400

A. B.

CABLE MANAGEMENT SPOOLS• Wall mounts to help retain and guide cable



A. ICACSWDS20 Spool with built-in wood screw, 10 pcs. 30

B. ICACSWDS10 Spool without screw, 10 pcs. 30

A. B.

C. D.

PA

TCH

PA

NE

LS &

CR

OS

S-C

ON

NE

CT

44



66 WIRING

66 WIRING BLOCK SYSTEM

Labeling strips

Bridging clips electrically interconnect

adjacent terminals within the same row

Terminals are designed for repeated termination

Terminate with solid insulated or stripped

cable (22~26 AWG)

89B mounting bracket

66 WIRING BLOCK AND MOUNTING BRACKET VALUEPACKS • Packaged in a resealable box for easy storage



PART NO. DESCRIPTION A. IC066NBC50 66 wiring block, 25 pcs. B. ICMB89BCWH 89B mounting bracket, 25 pcs.

66 WIRING BLOCK COVER, LABELING STRIPS AND BRIDGING CLIPS

PART NO. DESCRIPTION A. IC066CV050 Wiring block cover

• Protects terminated wires from dust and debris

B. IC066LS050 Labeling strips, 10 pcs.

• Use a standard labeler or pen

C. IC066BRCLP Bridging clips, 100 pcs.

• Electrically interconnect adjacent terminals within the same row

66 WIRING BLOCK, 50 PAIR• Wall mountable

• Made of high impact fl ame retardant material UL 94V-0

PART NO. DESCRIPTION A. IC066NB050 66 wiring block

MOUNTING BRACKETS• Snaps on the rear of 66 wiring blocks

PART NO. DESCRIPTION B. ICMB89B0WH 89B bracket, open rear, 10” H x 3.30” W x 1.90” DC. ICMB89D0WH 89D bracket, open front, 10” H x 3.30” W x 1.90” DD. ICMB89U0WH 89U bracket, open front, 10” H x 3.30” W x 2.35” D

B. A.

C. A. B.

A. B. C. D.


45

PATCH PANELS & CROSS-CONNECT PRE-WIRED 66 WIRING

66 WIRING BLOCKS PRE-WIRED WITH VOICE PORTS• Pre-wired voice ports

• Integrated with 89D mounting bracket for wall mounting

• 10” H x 3.30” W x 3.00” D


A. IC06686P6C 8-Ports, 6P6C 25

B. IC06626P4C 12-Ports, 6P4C 25

66 WIRING BLOCK PRE-WIRED WITH DATA PORTS• Pre-wired data ports


• 10” H x 3.30” W x 3.00” D


IC06628P8C 12-Ports, 8P8C 25

A. B.

66 WIRING BLOCKS PRE-WIRED WITH TELCO CONNECTORS• Pre-wired with 1 or 2 female Telco connectors (25/50-Pair)


• 10” H x 3.30” W x 3.00” D


A. IC066SFT25 Pre-wired with 1 25-pair female Telco connector 25

B. IC066DFT50 Pre-wired with 2 25-pair female Telco connectors 25

A. B.

66 WIRING BLOCK PRE-WIRED WITH MODULAR CONNECTORS 66 WIRING BLOCK PRE-WIRED WITH TELCO CONNECTORS

Hinged cover

Security strap

Telco cable

Works with color icons

P

RE

MIS

E C

AB

LES

46

PREMISE CABLES

888.ASK.4ICC | [email protected] | icc.com | CAB

One Vendor, No Compatibility IssuePremise cables and connectivity outlets are fi ne tuned to work together as End-to-End solutions. CAT 6

Permanent Link solution including modular connectors, patch panels and premise cables stack up to

7.6dB NEXT headroom when installed and tested per TIA specifi cation. We also work with Elite InstallersTM to

offer warranty programs that are simple and effective. Using End-to-End solutions, Elite Installers can offer

a 15 Year Performance Warranty without certifi cation. Better yet, Certifi ed Elite Installers can verify the site

and offer a Lifetime Performance Warranty.

+ + =

Protecting the Installation• 15 Year Performance Limited WarrantyTM for Elite Installers: no certifi cation required

• Lifetime Performance Limited WarrantyTM for Certifi ed Elite Installers for verifi ed sites

• Go online to icc.com/warranty for complete terms and conditions

1515YEARYEAR

TM

12YEAR

3YEARWARRANTYWARRANTY

LIFELIFETM

or

Work Area (WA)

Horizontal Cabling

Choosing the Right CablingChoose different category-rated cables to support any installation requirement. Premise cables exceed

TIA and IEEE standards and are backwards compatible with lower category-rated products.

TIA-568-C.2 Standards Frequency Applications Distance Maximum Pair Untwist

500 MHz10/100/1000 Base-T/10 GbE, Digital Video,

IEEE 802.3at for PoE Plus100 m. (328 ft.) 13 mm. (0.5 in.)

250 MHz10/100/1000 Base-T, Digital Video, Phone,

IEEE 802.3at for PoE Plus100 m. (328 ft.) 13 mm. (0.5 in.)

100 MHz 10/100 Base-T/1000 Base-T/ Phone 100 m. (328 ft.) 13 mm. (0.5 in.)

Permanent

Page 48Page 34Page 5

http://www.icc.com/c/25/premise-cables

47

PREMISE CABLES

Link

Telecom Room (TR)

CMR vs. CMP• Use Riser Rated Cable in vertical settings, such as cable runs

between fl oors through cable risers. These spaces cannot

be used for environmental air. The cable must self-extinguish

to prevent the fl ame from traveling up the cable.

• Use Plenum Rated Cable in spaces like raised fl ooring systems

and air handling ducts. Plenum cable must self-extinguish

and not reignite. They produce less smoke than traditional

PVC cable.

UTP vs. FTP• Use Unshielded Twisted Pair (UTP) cable in low Electromagnetic

Interference (EMI) environments. UTP cable is more cost

effective compared to FTP since it does not require the

manufacturing cost of the shielding in FTP cable.

• Use Foiled Twisted Pair (FTP) cable in environments with high

Electromagnetic Interference (EMI) or Radio Frequency

Interference (RFI).

Premium Quality• With stringent quality control procedures, premise cables

have been inspected and tested to comply with the strict

FCC®, TIA® and UL® standards.

• Premise cables are Restriction of Hazardous Substance (RoHS)

compliant to protect the environment.

Foiled shielding

P

RE

MIS

E C

AB

LES

48

PREMISE CABLES


0

100

20

40

60

80

0 250

NEXTdB

Frequency (MHz)PART NO. DESCRIPTION PALLET

ICCABP6Exx¹ CAT 6e UTP cable, CMP (Plenum) 36

ICCABR6Exx¹ CAT 6e UTP cable, CMR (Riser) 30 Color (xx¹) = BL WH GY YL GN

Tested per TIA Channel Link specifi cation

CAT 6e UTP 600 MHz PREMISE CABLES• 4-Pair, 23 AWG, UTP, solid copper cable

• Designed with an X separator

• 0.234" outer diameter

• Packaged in an EZ pull box; 15.55” H x 9.60” W x 15.75” D

• 1000 feet per box (305 meters)

GRAPH EXPLANATION: The graphs shown below display channel-rated performance tests of structured cabling systems, modular connectors, patch panels and patch cords installed with premise cable.

0

100

20

40

60

80

0 500

NEXTdB


ICCABP6Axx¹ CAT 6A UTP cable, CMP (Plenum) 15

ICCABR6Axx¹ CAT 6A UTP cable, CMR (Riser) 15 Color (xx¹) = BL WH


CAT 6A UTP 650 MHz 10G PREMISE CABLES• 4-Pair, 23 AWG, UTP, solid copper cable



• Packaged on a reel; 13.0" H x 17.3" W

• 1000 feet per reel (305 meters)

TIA standard limit

TIA standard limit

0

100

20

40

60

80

0 500

NEXTdB


ICCABP6Fxx¹ CAT 6A FTP cable, CMP (Plenum) 15

ICCABR6Fxx¹ CAT 6A FTP cable, CMR (Riser) 15 Color (xx¹) = BL


CAT 6A FTP 650 MHz 10G PREMISE CABLES• 4-Pair, 23 AWG, FTP, solid copper cable

• Shielded jacket protects from EMI and RFI noise



• Packaged on a reel; 13.0" H x 17.3" W

• 1000 feet per reel (305 meters)

TIA standard limit

Headroom

Signal transmission


49

PREMISE CABLES

FREQUENCY(MHz) 1 10 16 62.5 100 200 250 350 500 600

ATTENUATION(max) 2.0 5.9 7.4 14.9 19.1 27.7 31.2 37.5 45.8 50.7

RETURN LOSS(min) 21.0 25.5 26.0 26.0 22.5 19.8 19.0 17.8 16.2 15.7

NEXT(min) 82.3 67.3 64.2 55.4 52.3 47.8 46.3 45.7 44.8 44.2

PS NEXT(min) 80.3 65.3 62.2 53.4 50.3 45.8 44.3 43.7 42.8 42.2

ACR(min) 80.3 61.4 56.8 40.4 33.2 20.1 15.1 8.2 0.0 -

PS ACR(min) 78.3 59.4 54.8 38.4 31.2 18.1 13.1 6.2 - -

ACRF(min) 73.8 53.8 49.7 37.9 33.9 27.8 25.8 22.9 19.8 18.2

PS ACRF(min) 71.8 51.8 47.7 35.9 31.8 25.8 23.8 20.9 17.8 16.2

CAT 6e UTP 600 MHz PREMISE CABLE PERFORMANCE CHART

CHART EXPLANATION: The charts below show frequency and electrical performance values for reference only. Actual compliance testing is based on swept frequency measurements. The specifi cation values are based on TIA-568 standard and are expressed in dB per 100M (328 Ft.).

FREQUENCY(MHz) 1 10 16 62.5 100 200 250 350 500 600 650

ATTENUATION(max) 2.1 5.9 7.5 15.0 19.1 27.6 31.1 37.2 45.3 50.1 52.3

RETURN LOSS(min) 20.0 27.0 27.0 23.5 22.1 20.0 19.3 18.3 17.5 16.9 16.7

NEXT(min) 78.3 63.3 60.2 51.4 48.3 43.8 42.3 40.1 37.8 36.6 36.1

PS NEXT(min) 76.3 61.3 58.2 49.4 46.3 41.8 40.3 38.1 35.8 34.6 34.1

ACR(min) 71.8 51.8 47.7 35.9 31.8 25.8 23.8 20.9 17.8 - -

PS ACR(min) 68.8 48.8 44.7 32.9 28.8 22.8 20.8 17.9 14.8 - -

ACRF(min) 67.0 67.0 67.0 65.6 62.5 58.0 56.5 54.3 52.0 - -

PS ACRF(min) 67.0 58.2 54.1 42.3 38.2 32.2 30.2 27.3 24.2 - -

CAT 6A UTP 650 MHz 10G PREMISE CABLE PERFORMANCE CHART

FREQUENCY(MHz) 1 10 16 62.5 100 200 250 350 500 600 650

ATTENUATION(max) 2.1 5.9 7.5 15.0 19.1 27.6 31.1 37.2 45.3 50.1 52.3

RETURN LOSS(min) 20.0 27.0 27.0 23.5 22.1 20.0 19.3 18.3 17.5 16.9 16.7

NEXT(min) 78.3 63.3 60.2 51.4 48.3 43.8 42.3 40.1 37.8 36.6 36.1

PS NEXT(min) 76.3 61.3 58.2 49.4 46.3 41.8 40.3 38.1 35.8 34.6 34.1

ACR(min) 71.8 51.8 47.7 35.9 31.8 25.8 23.8 20.9 17.8 - -

PS ACR(min) 68.8 48.8 44.7 32.9 28.8 22.8 20.8 17.9 14.8 - -

ACRF(min) 67.0 67.0 67.0 65.6 62.5 58.0 56.5 54.3 52.0 - -

PS ACRF(min) 67.0 58.2 54.1 42.3 38.2 32.2 30.2 27.3 24.2 - -

CAT 6A FTP 650 MHz 10G PREMISE CABLE PERFORMANCE CHART

P

RE

MIS

E C

AB

LES

50

PREMISE CABLES


0

100

20

40

60

80

0 250

NEXTdB


ICCABP6Vxx¹ CAT 6 UTP cable, CMP (Plenum) 30 Color (xx¹) = BL WH GY YL GN


CAT 6 UTP 500 MHz PREMISE CABLES, PLENUM• 4-Pair, 23 AWG, UTP, solid copper cable




0

100

20

40

60

80

0 250

NEXTdB


ICCABR6Vxx¹ CAT 6 UTP cable, CMR (Riser) 36 Color (xx¹) = BL WH GY YL GN


CAT 6 UTP 500 MHz PREMISE CABLES, RISER• 4-Pair, 23 AWG, UTP, solid copper cable




0

100

20

40

60

80

0 100

NEXTdB


ICCABP5Exx¹ CAT 5e UTP cable, CMP (Plenum) 39

ICCABR5Exx¹ CAT 5e UTP cable, CMR (Riser) 45 Color (xx¹) = BL WH GY YL GN


CAT 5e UTP 350 MHz PREMISE CABLES• 4-Pair, 24 AWG, UTP, solid copper cable




TIA standard limit

Headroom

Signal transmission

TIA standard limit

TIA standard limit

GRAPH EXPLANATION: The graphs shown below display channel-rated performance tests of structured cabling systems, modular connectors, patch panels and patch cords installed with premise cable.


51

PREMISE CABLES

FREQUENCY(MHz) 1 10 16 62.5 100 200 250

ATTENUATION(max) 2.0 6.0 7.6 15.4 19.8 29.0 32.8

RETURN LOSS(min) 20.0 25.0 25.0 21.5 20.1 18.0 17.3

NEXT(min) 74.3 59.3 56.2 47.4 44.3 39.8 38.3

PS NEXT(min) 72.3 57.3 54.2 45.4 42.3 37.8 36.3

ACR(min) 72.3 53.3 48.7 32.0 24.5 10.8 5.5

PS ACR(min) 70.3 51.3 46.7 29.9 22.5 8.8 3.5

ACRF(min) 67.8 47.8 43.7 31.8 27.8 21.8 19.8

PS ACRF(min) 64.8 44.8 40.7 28.9 24.8 18.8 16.8

CAT 6 UTP 500 MHz PLENUM PREMISE CABLE PERFORMANCE CHART

FREQUENCY(MHz) 1 10 16 62.5 100 200 250

ATTENUATION(max) 2.0 6.0 7.6 15.4 19.8 29.0 32.8

RETURN LOSS(min) 20.0 25.0 25.0 21.5 20.1 18.0 17.3

NEXT(min) 74.3 59.3 56.3 47.4 44.3 39.8 38.3

PS NEXT(min) 72.3 57.3 54.3 45.1 42.3 37.8 36.3

ACR(min) 72.3 53.3 48.7 32.0 24.5 10.8 5.5

PS ACR(min) 70.3 51.3 46.7 30.0 22.5 8.8 3.5

ACRF(min) 67.8 47.8 43.7 31.8 27.8 21.7 19.8

PS ACRF(min) 64.8 44.8 40.7 28.8 24.8 18.7 16.8

CAT 6 UTP 500 MHz RISER PREMISE CABLE PERFORMANCE CHART

FREQUENCY(MHz) 1 10 16 62.5 100 200 250

ATTENUATION(max) 2.0 6.3 8.0 16.0 20.5 29.5 33.2

RETURN LOSS(min) 21.0 26.0 26.0 22.5 21.1 19.0 18.3

NEXT(min) 70.3 55.3 52.2 43.4 40.3 35.8 34.3

PS NEXT(min) 68.3 53.3 50.2 41.4 38.3 33.8 32.3

ACR(min) 68.3 49.0 44.2 27.3 19.8 6.3 1.2

PS ACR(min) 66.3 47.0 42.2 25.3 17.8 4.3 0

ACRF(min) 67.8 47.8 43.7 31.9 27.8 21.8 19.8

PS ACRF(min) 64.8 44.8 40.7 28.9 24.8 18.8 16.8

CAT 5e UTP 350 MHz PREMISE CABLE PERFORMANCE CHART

CHART EXPLANATION: The charts below show frequency and electrical performance values for reference only. Actual compliance testing is based on swept frequency measurements. The specifi cation values are based on TIA-568 standard and are expressed in dB per 100M (328 Ft.).

52

RACKS & CABLE MANAGEMENTR

AC

KS

& C

AB

LE M

AN

AG

EM

EN

T

888.ASK.4ICC | [email protected] | icc.com | CMS

WALL AND FLOOR MOUNT SOLUTIONS

Hinged Wall Mount Brackets• Limited space / closet installations

• Available in EZ-Fold or regular style

• Supports up to 60 lb. of equipment

Fixed Frame Wall Mount Racks• Limited fl oor space / small room installations

• Self-squaring design; easy to assemble


6" D

15" D

18" D

http://www.icc.com/c/22/racks-cable-management

53

RACKS & CABLE MANAGEMENT WALL AND FLOOR MOUNT SOLUTIONS

Swing Gate Wall Mount Racks• Small room / space for swing out

• Swing out to access rear cable or equipment


Floor Mount Distribution Racks• Regulation size Telecom Rooms

• Available with 2 and 4 posts


19" D

54


AC

KS

& C

AB

LE M

AN

AG

EM

EN

T


WALL MOUNT BRACKETS

EZ-FOLD WALL MOUNT BRACKET FEATURES• Unfold to 6 inch depth

• No weight bearing at the hinge

• Heavy duty 16 gauge steel

6" D

2.5" H

Folds like a book to save storage space

Double mounting, double the strength

Hinged every 2 RMS allowing panels to swing out

giving access to the rear

Optional top cover

EZ-FOLD WALL MOUNT BRACKET FEATURES• No weight bearing at the hinge

• Hinged every 2 RMS for easy upgrade access and maintenance

• Double mounting, double the strength


15" D2.5" H

Optional top and bottom covers

Folds like a book to save storage space

HINGED WALL MOUNT BRACKET FEATURES• Large rear opening for cable entry

• Standard EIA-310-D hole pattern

• Roll tapped threading limits rack screws from stripping

• 0.25" wall mounting holes


• Optional cover can be mounted on top only

Hinged for quick and easy rear access6" D


55

RACKS & CABLE MANAGEMENT

ICCMSHBCVR

WALL MOUNT BRACKETS

EZ-FOLD WALL MOUNT BRACKETS, 6" DEPTH• Designed with heavy duty steel supporting up to 30 lb. of equipment

• 6” depth for network and phone equipment


PART NO. DESCRIPTIONICCMSHBCVR Wall mount bracket cover, 1 pc.ICCMSABR62 3.50” H x 19.30” W x 6” D, 30 lb. capacity, 2 RMS*ICCMSABR64 7.00” H x 19.30” W x 6” D, 30 lb. capacity, 4 RMS*ICCMSABR66 10.50” H x 19.30” W x 6” D, 30 lb. capacity, 6 RMS*ICCMSABR68 14.00” H x 19.30” W x 6” D, 30 lb. capacity, 8 RMS*

ICCMSABR62 ICCMSABR64 ICCMSABR66 ICCMSABR68


ICCMSABRSCICCMSABRS2 ICCMSABRS4 ICCMSABRS6 ICCMSABRS8

EZ-FOLD WALL MOUNT BRACKETS, 15" DEPTH• Designed with heavy duty steel supporting up to 30 lb. of equipment



PART NO. DESCRIPTIONICCMSABRSC Wall mount bracket cover kit, top and bottom covers, 2 pcs.ICCMSABRS2 3.50” H x 19.30” W x 15” D, 30 lb. capacity, 2 RMS*ICCMSABRS4 7.00” H x 19.30” W x 15” D, 30 lb. capacity, 4 RMS*ICCMSABRS6 10.50” H x 19.30” W x 15” D, 30 lb. capacity, 6 RMS*ICCMSABRS8 14.00” H x 19.30” W x 15” D, 30 lb. capacity, 8 RMS*

ICCMSHBCVR

HINGED WALL MOUNT BRACKETS, 6" DEPTH• Designed with heavy duty steel supporting up to 40 lb. of equipment


• Package includes #10 wood screws and #12 rack screws

PART NO. DESCRIPTIONICCMSHBCVR Wall mount bracket cover, 1 pc.ICCMSHB1RS 1.75” H x 19.31” W x 6” D, 10 lb. capacity, 1 RMS*ICCMSHB1RC 1.75” H x 19.31” W x 6” D, 10 lb. capacity, 1 RMS*, 2 pcs. VALUEPACKICCMSHB2RS 3.50” H x 19.31” W x 6” D, 20 lb. capacity, 2 RMS*ICCMSHB2RC 3.50” H x 19.31” W x 6” D, 20 lb. capacity, 2 RMS*, 2 pcs. VALUEPACKICCMSHB4RS 7.00” H x 19.31” W x 6” D, 40 lb. capacity, 4 RMS*ICCMSHB4RC 7.00” H x 19.31” W x 6” D, 40 lb. capacity, 4 RMS*, 2 pcs. VALUEPACK

ICCMSHB1RS ICCMSHB2RS ICCMSHB4RS

56


AC

KS

& C

AB

LE M

AN

AG

EM

EN

T


SWING MOUNT RACKS

SWING FRAME WALL MOUNT RACK FEATURES• Assemble and install in four easy steps

• Supports up to 85 lb.

• The frame is designed to swing outward


• Steel construction for strength and durability

WALL MOUNT RACK FEATURES• 18” depth for network and phone equipment




SWING GATE WALL MOUNT RACK FEATURES• Swings open left or right for quick and easy access

• Punch down while fully open

• 150 lb. weight capacity




Swings open

Swings open

"Positive stop" locking mechanism

Self-squaring design

The frame can be installed to swing open left or right

The frame can be installed to swing open left or right

Package includes a template to mark holes

Studs

Wall

Wing bolt locking system

Template

16"


57


ICCMSWMR08 ICCMSWMR15 ICCMSWMR30

SWING MOUNT RACKS

ICCMSSFR12 ICCMSSFR25

ICCMSSGR21 ICCMSSGR22

SWING GATE WALL MOUNT RACKS, 19" DEPTH• Designed with heavy duty steel, supporting up to 150 lb. of equipment


PART NO. DESCRIPTIONICCMSSGR21 27" H x 20.5" W x 19" D, 150 lb. capacity, 12 RMS*ICCMSSGR22 41" H x 20.5" W x 19" D, 150 lb. capacity, 20 RMS*


WALL MOUNT RACKS, 18" DEPTH• Designed with heavy duty steel, supporting up to 125 lb. of equipment


PART NO. DESCRIPTIONICCMSWMR08 17.75" H x 19.75" W x 18" D, 8 RMS*ICCMSWMR15 30.00" H x 19.75" W x 18" D, 15 RMS*ICCMSWMR30 56.25" H x 19.75" W x 18" D, 30 RMS*

SWING FRAME WALL MOUNT RACKS, 18" DEPTH• Designed with heavy duty steel, supporting up to 85 lb. of equipment


PART NO. DESCRIPTIONICCMSSFR12 25.60” H x 19.50” W x 18”D, 85 lb. capacity, 12 RMS*ICCMSSFR25 49.13” H x 19.50” W x 18”D, 85 lb. capacity, 25 RMS*

58


AC

KS

& C

AB

LE M

AN

AG

EM

EN

T


Swings down 90 degrees

WALL MOUNT RACKS

UTILITY WALL MOUNT RACK• Suitable for areas where fl oor or wall space is limited





PART NO. DESCRIPTIONICCMSWMUR5 Wall mount utility rack, 5 RMS*


VERTICAL HINGED WALL MOUNT BRACKET FEATURES• Mounting rails tilt downward for easy access to rear equipment

• Rail is designed with twist-lock to secure mounted equipment

• The frame comes assembled





PART NO. DESCRIPTIONICCMSVHB06 12.75" H x 19.75" W x 12" D, 40 lb. capacity, 6 RMS*ICCMSVHB08 16.25" H x 19.75" W x 12" D, 60 lb. capacity, 8 RMS*ICCMSVHB18 16.25" H x 19.75" W x 18" D, 60 lb. capacity, 8 RMS*

ICCMSVHB06 ICCMSVHB08 ICCMSVHB18

Equipment mounts vertically

75 lb. weight capacity


59

RACKS & CABLE MANAGEMENT FLOOR MOUNT RACKS

2-POST DISTRIBUTION RACKS• 19” EIA rack mount width

• Supports up to 750 lb. when fl oor anchored

• Lightweight aluminum construction

PART NO. DESCRIPTION ICCMSR1984 7' H, 45 RMS* ICCMSR1972 6' H, 38 RMS* ICCMSR1948 4' H, 24 RMS* ICCMSRFLKT Concrete rack mount kit

Roll tapped mounting holes


ICCMSR1948 ICCMSR1972 ICCMSR1984

ADJUSTABLE 4-POST DISTRIBUTION RACK• Designed to be adjusted from 27" and up to 32" depth

• Works with 4-post rack shelves

• 19” EIA rack mount width

• Side rail holes for linking racks or vertical cable channels

• Supports up to 1500 lb. when properly loaded and fl oor anchored


• Mounts to concrete fl oor with optional anchor kit

PART NO. DESCRIPTIONICCMSR4P84 7' H, 45 RMS*ICCMSRFLKT Concrete rack mount kit

Rack is designed to adjust

from 27" up to 32" depth

ICCMSRFLKT

The rails on all racks have Rack

Mount Space (RMS) numbered

markings

Numbered markings

60


AC

KS

& C

AB

LE M

AN

AG

EM

EN

T


FLOOR MOUNT RACKS


CABLE MANAGEMENT RACK• 19” EIA rack mount width

• Designed with side rail holes for linking racks

• Supports up to 1000 lb. when fl oor anchored

• Mounts to concrete fl oor with optional anchor kit


PART NO. DESCRIPTIONICCMSCMRH7 7' H, 44 RMS*ICCMSRFLKT Concrete rack mount kit

VERTICAL CABLE CHANNEL AND COVER• Joins two 2-Post or 4-Post distribution racks together

• Front swivel latches for easy cable assembly

• Large rear openings for simplifi ed cable routing


• 6.5" H x 6" W x 6.10" D

PART NO. DESCRIPTIONICCMSCC6BK 6.5' H vertical cable channelICCMSCCVBK 3' H vertical cable channel cover

Cable channels can be

mounted back to back

ICCMSCC6BKICCMSCCVBK

Integrated with 6" depth x 3.15" width cable channels

along both sides of rails

Numbered markings

2 covers are required to

cover 1 cable channel


61

RACKS & CABLE MANAGEMENT VERTICAL CABLE MANAGEMENT PANELS

ICCMSCMA84 ICCMSCMA81 ICCMSCMA21 ICCMSCMA83 ICCMSCMA82 ICCMSCMA23 ICCMSCMA22

SINGLE-SIDED VERTICAL FINGER DUCT PANELS, 4" W X 5" D• Package includes cover and #12 rack screws

DOUBLE-SIDED VERTICAL FINGER DUCT PANELS, 4" W X 10" D• Package includes cover and #12 rack screws

PART NO. DESCRIPTION ICCMSCMA84 78" H, front, fl at mount, brackets on one side ICCMSCMA81 78" H, front, side mount, brackets on one side ICCMSCMA21 35" H, front, side mount, brackets on one side

PART NO. DESCRIPTION ICCMSCMA83 78" H, front and rear, side mount, brackets on one side ICCMSCMA82 78" H, front and rear, center mount, brackets on both sidesICCMSCMA23 35" H, front and rear, side mount, brackets on one side ICCMSCMA22 35" H, front and rear, center mount, brackets on both sides

Rear feed-through holes

FINGER DUCT PANEL FEATURES• Route and manage large amounts of cable

• Designed with fl exible fi ngers for easy cable routing

• Durable plastic

MOUNTING OPTIONS

Center MountBrackets on both sides to interconnect two racks

Side MountBracket on one side, mounts on either side

of the rack's rear rails

Flat MountFlat bracket on side, works with ICCMSCMRH7 rack

Slide-on and removable covers

62


AC

KS

& C

AB

LE M

AN

AG

EM

EN

T


PART NO. DESCRIPTIONA. ICCMSCMA51 Interbay panel, 1.75" H x 19" W x 3.88" D, 1 RMS*B. ICCMSCMA52 Interbay panel, 3.50" H x 19" W x 3.88" D, 2 RMS*C. ICCMSCMA31 Ring panel, 1.75" H x 19" W x 3.88" D, 1 RMS*D. ICCMSCMA32 Ring panel, 3.50" H x 19" W x 3.88" D, 2 RMS*

HORIZONTAL CABLE MANAGEMENT PANELS


PART NO. DESCRIPTIONA. ICCMSCMA41 Single-sided, 1.75 H x 19" W x 3.25" D, 1 RMS* B. ICCMSCMA42 Single-sided, 3.50" H x 19" W x 3.25" D, 2 RMS*C. ICCMSCMA61 Double-sided, 1.75" H x 19" W x 7.10" D, 1 RMS*D. ICCMSCMA62 Double-sided, 3.50" H x 19" W x 7.10" D, 2 RMS*

C.

A.

D.

B.

A.

B.

C.

D.

PLASTIC RING AND INTERBAY PANELS• Plastic rings for easy cable routing

• Base is designed with openings for rear cable access and with

cable tie anchor points


• Package includes cover and #12 rack screws

HORIZONTAL FINGER DUCT PANELS• Available in single and double-sided styles

• Designed with fl exible fi ngers for easy cable routing


• Package includes cover and #12 rack screws


63

RACKS & CABLE MANAGEMENT HORIZONTAL CABLE MANAGEMENT PANELS

METAL RING AND INTERBAY PANELS• Steel construction for strength and durability

• Base is designed with openings for rear cable access



PART NO. DESCRIPTIONA. ICCMSCMPK1 Ring panel and cover, 1.75" H x 19" W x 3" D, 1 RMS*B. ICCMSCMPK2 Ring panel and cover, 3.50" H x 19" W x 3" D, 2 RMS*C. ICCMSCMP31 Ring panel, 1.75" H x 19" W x 2.83" D, 1 RMS*D. ICCMSCMP32 Ring panel, 3.50" H x 19" W x 2.83" D, 2 RMS*E. ICCMSCMP51 Interbay panel, 1.75" H x 19" W x 3" D, 1 RMS*F. ICCMSCMP52 Interbay panel, 3.50" H x 19" W x 3" D, 2 RMS*

EXTENDED BRACKETS AND BLANK PANELS• Extended brackets are designed for front or rear cable management

• No extra rack mount spaces are needed

• Blank panels fi ll empty spaces between mounted equipment

• Both fi t standard 19” EIA rack mount widths



A. ICCMSFCMRP Front extended bracket, 3" deepB. ICCMSRCMRP Rear extended bracket, 5" deepC. ICCMSCMPB1 Blank panel, 1.75" H x 19" W, 1 RMS* 60

D. ICCMSCMPB2 Blank panel, 3.50" H x 19" W, 2 RMS* 40

E. ICCMSCMPB3 Blank panel, 5.25" H x 19" W, 3 RMS* 30

F. ICCMSCMPB4 Blank panel, 7.00" H x 19" W, 4 RMS* 30

G. ICCMSCMPC1 Blank panel, 1.75" H x 19" W, 1 RMS*, 12 pcs. VALUEPACK ICCMSCMPC2 Blank panel, 3.50" H x 19" W, 2 RMS*, 12 pcs. VALUEPACK ICCMSCMPC3 Blank panel, 5.25" H x 19" W, 3 RMS*, 6 pcs. VALUEPACK ICCMSCMPC4 Blank panel, 7.00" H x 19" W, 4 RMS*, 6 pcs. VALUEPACK

A.

B.

E.

F.

METAL BLANK PANEL VALUEPACKS

A.

B.

C.

D.

E.

F.

G.


5" D

3" D

C.

D.

64


AC

KS

& C

AB

LE M

AN

AG

EM

EN

T


PLASTIC RINGS

FRONT AND REAR PLASTIC RING, 3" HEIGHT X 3" WIDTH• Mount between distribution racks to route cable horizontally

• Designed with a steel frame


PART NO. DESCRIPTIONICCMSCMPR9 3" H x 3" W dual rings, horizontal

PLASTIC RING, 1.25" HEIGHT• Mount on the sides of racks to route cable horizontally


PART NO. DESCRIPTIONICCMSCMPR6 1.25" H sIngle ring, horizontal

FRONT AND REAR PLASTIC RING, 3" HEIGHT X 3" WIDTH• Mount between distribution racks to route cable vertically

• Designed with a steel frame


PART NO. DESCRIPTIONICCMSCMPR8 3" H x 3" W dual rings, vertical

PLASTIC RING, 1.25" WIDTH• Mount on the sides of racks to route cable vertically


PART NO. DESCRIPTIONICCMSCMPR5 1.25" W sIngle ring, vertical

UNIVERSAL PLASTIC RING, 3" HEIGHT X 3" WIDTH• Mount on the sides of racks to route cable vertically and horizontally

• Mount between distribution racks to join them together


PART NO. DESCRIPTIONICCMSCMPR7 3" H x 3" W sIngle ring, universal


65

RACKS & CABLE MANAGEMENT METAL RINGS AND ACCESSORIES

METAL RINGS• Mount on the sides of racks to route cable vertically

• Available with single-sided and double-sided rings

• Metal construction for durability


PART NO. DESCRIPTION A. ICCMSCMPR1 1.70" single-sided, verticalB. ICCMSCMPR2 3" single-sided, verticalC. ICCMSCMPR3 3" double-sided, verticalD. ICCMSCMPR4 6" double-sided, vertical

METAL RING VALUEPACKS• Packaged in a resealable bag for easy storage



PART NO. DESCRIPTION A. ICCMSCMPT1 1.70" single-sided, vertical, 10 pcs.B. ICCMSCMPT2 3" single-sided, vertical, 10 pcs.

A.

B.

C. D.

"L" BRACKET PANEL, SINGLE AND VALUEPACK

PART NO. DESCRIPTIONA. ICCMSCMPL1 0.95" H x 6" W, 1 pc.

• Designed to mount to any EIA compliant hole spacing

• Provides custom vertical or horizontal cable management

B. ICCMSCMPLC 0.95" H x 6" W, 25 pcs. VALUEPACK

• Packaged in a resealable box for easy storage




A. B.

Cable Radius ManagerCable radius manager sits on the side or mounts on the front of wall mount and distribution racks to support cable bend radius.

PART NO. DESCRIPTIONICCMSRMU02 Radius management units, 2 pcs.ICCMSRMU1C Radius management units, 20 pcs. VALUEPACK

Fits on the side of racks

Fits on the front of racks

A. B.

66


AC

KS

& C

AB

LE M

AN

AG

EM

EN

T


RACK SHELVES


SOLID BOTTOM RACK SHELVES• Supports heavier equipment


10" Depth, 2 RMS*75 lb. capacity

Single-sided

PART NO. ICCMSRSF10

10" Depth VALUEPACK2 pieces per box

PART NO. ICCMSRSFC1


Single-sided

PART NO. ICCMSRSF15

15" Depth VALUEPACK2 pieces per box

PART NO. ICCMSRSFC2


Double-sided

Compatible with 2-Post racks

PART NO. ICCMSRDS20


Double-sided


PART NO. ICCMSRDS30

20" Depth, 3 RMS* Heavyduty250 lb. capacity

Double-sided

PART NO. ICCMSHDS20

VENTED BOTTOM RACK SHELVES• Provides air fl ow to ventilate mounted equipment



Single-sided

PART NO. ICCMSRSV10


Single-sided

PART NO. ICCMSRSV15


Double-sided


PART NO. ICCMSRDV20


Double-sided


PART NO. ICCMSRDV30

125


67


ADJUSTABLE 27" TO 32" SOLID BOTTOM, 2 RMS*125 lb. capacity

PART NO. ICCMSRAS30

32" VENTED BOTTOM, 2 RMS*125 lb. capacity

PART NO. ICCMSRFV32

RACK SHELVES

4-POST RACK SHELVES• Manufactured with durable steel



27" W

32" W


10" SLIDING KEYBOARD SHELF, 3 RMS*• Bottom tray slides out an additional 10" to hold a keyboard

• Top shelf space can hold a fl at screen monitor and a mouse

• 20" fully extended

• 25 lb. capacity


10" KEYBOARD SHELF, 3 RMS*• Keyboard shelf with sliding mouse tray

• 18.25" fully extended

• 10 lb. capacity


ICCMSRKLST ICCMSRKSMTPART NO.

68


AC

KS

& C

AB

LE M

AN

AG

EM

EN

T


J-HOOKS

ICCMSJH922 ICCMSJH933 ICCMSJH944 ICCMSJH955

CEILING MOUNT J-HOOK VALUEPACKS• Secures cable from the ceiling

• Designed with a 90º swivel bracket allowing the hook to pivot from 0O to 180O

• Alternative solution to cable trays

• Made of high quality galvanized steel

• Rust resistant zinc fi nish


WALL MOUNT J-HOOK VALUEPACKS• Secures cable to the wall

• Alternative solution to cable trays

• Made of high quality galvanized steel

• Rust resistant zinc fi nish


ICCMSJHK22 ICCMSJHK33 ICCMSJHK44 ICCMSJHK55

4"

2"

1 5/16"

3/4"

4"

2"

1 5/16"

3/4"

CABLE TYPE

J-HOOK SIZECAT 5e 4-PAIR 23 AWG

0.340" dia.CAT 6 4-PAIR 23 AWG

0.236" dia.CAT 6A 4-PAIR 24 AWG

0.189" dia.

3/4" 15 10 5

1 5/16" 50 30 15

2" 80 50 25

4" 160 100 50

J-HOOK FILL CHART - 50% CAPACITY

Based on 50% fi ll capacity and ICC cabling O.D.

PART NO.

PART NO.


69


#12 RACK SCREWS• #12-24 UNC thread combination drive

• 5/8 inch

• Black oxide fi nish

• Used with racks and rack mount products

PART NO. DESCRIPTIONICACSS01BK #12-24 x 5/8", 25 pcs.

CONCRETE RACK MOUNT KIT• Secures racks to concrete fl oors and brick walls

• 1200 lb. of load tension when properly installed as a kit

• Self expanding, no caulking is required

• Package includes 4 anchors, rods, hex nuts and washers

PART NO. DESCRIPTIONICCMSRFLKT Rack mount kit

GROUNDING KIT• Terminates grounding cable to patch panels and racks

• Accepts 6~14 gauge wires

PART NO. DESCRIPTIONICACSGKS00 Grounding kit

RACK ACCESSORIES

19" W

23" W

Convert Panels from 19" to 23"

PART NO. DESCRIPTIONICCMSCBARM 1 RMS*, 2 pcs.ICCMSCBARC 1 RMS*, 20 pcs. VALUEPACKICCMSCBBRM 2 RMS*, 2 pcs.ICCMSCBBRC 2 RMS*, 20 pcs. VALUEPACK


Offset bracket design maintains fl ush mounting of panels

70


AC

KS

& C

AB

LE M

AN

AG

EM

EN

T


9. PROTECTIVE END CAPSCovers runway ends

ICCMSLPECK, 2 each

10. J-BOLT KITInserts over and secures runway

ICCMSLJB01, 2 each

12. BUTT SPLICESJoins ladder rack runway at ends

ICCMSLEBSK, 2 each

11. TEE-JUNCTION SPLICESFastens runway in a tee intersection

ICCMSLTJSK, 2 each

LADDER RACK SYSTEM

7. WALL SUPPORT ANGLEMounts runway to the wall

ICCMSLAWSK

8. RELAY RACK BRACKETMounts and secures runway over racks

ICCMSLRRBK

16

14

12

9

8

7LADDER RACK RUNWAY SECTIONS PART NO. DESCRIPTION

1. ICCMSLST10 Ladder rack runway, 10'

2. ICCMSLST05 Ladder rack runway, 5'

3. ICCMSLRW05 Kit, 5' runway, relay bracket, wall angle and J-bolts

4. ICCMSLFT90 90O fl at turn for a gradual sweeping bend

5. ICCMSLIR90 90O inside corner routes cable vertically

6. ICCMSLOR90 90O outside corner routes cable vertically

1 & 2

1 & 2

3

4

6

5

4

5


71


6' THREADED CEILING RODSCeiling mount to sustain over-hanging runway

ICCMSLCMRK, 2 each

LADDER RACK SYSTEM

13. TRIANGLE WALL SUPPORTHolds ladder rack runway to the

wall, recommended every 5'

ICCMSLTWSK

14. WALL BRACKETSSecures runway fl at against the wall

ICCMSLVWBK, 2 each

16. RADIUS DROPMaintains bend radius at drop points

ICCMSLCRDK

15. SWIVEL BUTT SPLICESAllows ends to adjust in various angles

ICCMSLESSK, 2 each

17. CABLE POSTSPrevents cable from falling

ICCMSLCRPK, 2 each

4-POST RELAY RACK BRACKETSSecures runway over 4-Post racks

ICCMSL4PBK, 2 each

15

13

1110

FLOOR FOOT KITIncludes mounting feet and butt

splice to secure runway to the fl oor

ICCMSLMFFK, 2 each

17

6

*When properly secured on both ends of ladder rack runway straight sections

**Cable fi lls are based on .34” outside diameter (OD) CAT 6A, .24” O.D. CAT 6, and .21” O.D. CAT 5e ICC cable

LADDER RACK WEIGHT CHART - 50% CAPACITY CABLE RUNWAY FILLS

DISTANCE BETWEEN SPAN WEIGHT CAPACITY WIDTH CAT 6A (50%**) CAT 6 (50%**) CAT 5e (50%**)

10' straight section 300 lb.* 12" 500 720 1100

5' straight section 500 lb.* 12" 500 720 1100

72

CORDS & CABLE ASSEMBLIESC

OR

DS

& C

AB

LE A

SS

EM

BLI

ES

888.ASK.4ICC | [email protected] | icc.com | PCS

CAT 6A AND CAT 6 PATCH CORDS

CAT 6A FTP 10G PATCH CORDS• Exceeds TIA-568 CAT 6A performance standard

• Supports 10G bandwidth

• 360O shielding from Electromagnetic Interference and Alien Crosstalk

• RJ-45 plugs with 50 micro inch gold plated contacts

• Factory tested and wired T568

PART NO. DESCRIPTIONICPCSGzzxx¹ 4-Pair, FTP, 26 AWG, stranded conductors

Length (zz¹) = 03, 05, 07, 10, 15 and 25 feet Color (xx¹) = WH BL YL BK

COMPONENT-RATED PERFORMANCE TEST

0

100

20

40

60

80

0 500

NEXTdB

Frequency (MHz)Molded slim profi le strain relief

CAT 6 PATCH CORDS• Exceeds TIA-568 CAT 6 performance standard

• Slim boot fi ts narrow port spacing

• Flexible snag-free strain relief boots help maintain proper bend radius



PART NO. DESCRIPTION ICPCSKzzxx¹ 4-Pair, UTP, 24 AWG, stranded conductors

Length (zz¹) = 01, 03, 05, 07, 10, 14 and 25 feet Color (xx¹) = WH BL OR RD YL GY BK GN


0

100

20

40

60

80

0 250

NEXTdB

Frequency (MHz)

Molded slim profi le strain relief

Tested per TIA Component-Rated specifi cation


Top view

Bottom view

All CAT 6A, CAT 6 and CAT 5e patch cords

have 50 micro inch gold plated contacts

TIA standard limit

Headroom

Signal transmission

TIA standard limit

http://www.icc.com/c/21/cords-cable-assemblies

73

CORDS & CABLE ASSEMBLIES CAT 6 AND CAT 5e PATCH CORDS

CAT 5e PATCH CORDS• Exceeds TIA-568 CAT 5e performance standard

• Slim boot fi ts narrow port spacing

• Flexible snag-free strain relief boots help maintain proper bend radius



PART NO. DESCRIPTION ICPCSJzzxx¹ 4-Pair, UTP, 24 AWG, stranded conductors

Length (zz¹) = 01, 03, 05, 07, 10, 14 and 25 feet Color (xx¹) = WH BL OR RD YL GY BK GN


0

100

20

40

60

80

0 100

NEXTdB

Frequency (MHz)

Molded slim profi le strain relief

CAT 6 AND CAT 5e PATCH CORD VALUEPACKS• 4-Pair, UTP, 24 AWG, stranded conductors

• Packaged in a resealable bag for easy storage



A. CAT 6PART NO. DESCRIPTION ICPCSD01BL 1' L, 25 pcs.ICPCSD03BL 3' L, 25 pcs.ICPCSD05BL 5' L, 25 pcs.ICPCSD07BL 7' L, 25 pcs.ICPCSD10BL 10' L, 25 pcs.Length = 01, 03, 05, 07 and 10 feet Color = Blue


A. B.

Top view

Bottom viewTIA standard limit

Headroom

Signal transmission

B. CAT 5ePART NO. DESCRIPTION ICPCSC01BL 1' L, 25 pcs.ICPCSC03BL 3' L, 25 pcs.ICPCSC05BL 5' L, 25 pcs.ICPCSC07BL 7' L, 25 pcs.ICPCSC10BL 10' L, 25 pcs.

T568 Wiring Diagram

White / OrangeOrangeWhite / GreenBlueWhite / BlueGreenWhite / BrownBrown

12345678

87654321

BrownWhite / Brown

GreenWhite / Blue

BlueWhite / Green

OrangeWhite / Orange

74


OR

DS

& C

AB

LE A

SS

EM

BLI

ES


110 TO RJ-45 CAT 6 PATCH CORD, T568B• Terminated with 110 to RJ-45 patch plugs

• 4-Pair, 8P8C, wired to T568B


• Factory tested

PART NO. DESCRIPTIONICPCSEzzBL¹ 110 to RJ-45

Length (zz¹) = 03, 07 and 10 feet Color = Blue

110 PATCH CORDS

110 Patching110 patch cords are factory terminated and tested to exceed CAT 5e or CAT 6 performance standards.

110 TO 110 CAT 5e PATCH CORD, T568B• Terminated with 110 to 110 patch plugs

• 4-Pair, wired to T568B


• Factory tested

PART NO. DESCRIPTIONICPCSRzzBL¹ 110 to 110


110 TO 110 CAT 6 PATCH CORD, T568B• Terminated with 110 to 110 patch plugs

• 4-Pair, wired to T568B


• Factory tested

PART NO. DESCRIPTIONICPCSQzzBL¹ 110 to 110


110 TO RJ-45 CAT 5e PATCH CORD, T568B• Terminated with 110 to RJ-45 patch plugs

• 4-Pair, 8P8C, wired to T568B


• Factory tested

PART NO. DESCRIPTIONICPCSBzzBL¹ 110 to RJ-45



75

CORDS & CABLE ASSEMBLIES TELCO CABLES

FEMALE TO FEMALE 25-PAIR RJ-21X TELCO CABLE• Terminated with female Telco connectors

• 25-Pair, 24 AWG, UTP cable

PART NO. DESCRIPTION ICPCSTFFzz¹ Female to female 25-Pair Telco cable

Length (zz¹) = 05, 10, 15, 25, 75 and 00 (00 = 100) feet Color = Gray

MALE TO FEMALE 25-PAIR RJ-21X TELCO CABLE• Terminated with male to female Telco connectors


PART NO. DESCRIPTION ICPCSTFMzz¹ Male to female 25-Pair Telco cable


BLUNT 25-PAIR RJ-21X TELCO CABLE TO TELCO CONNECTOR• Blunt end allows cable to be terminated onto 110 and 66 wiring blocks

• The other end is terminated with a male or female Telco connector

PART NO. DESCRIPTION ICPCSTMBzz¹ Blunt cable to male Telco connector (pictured)ICPCSTFBzz¹ Blunt cable to female Telco connector

Length (zz¹) = 05, 10, 15 and 25 feet Color = Gray

Female Female

Male Female

MALE TO MALE 25-PAIR RJ-21X TELCO CABLE• Terminated with male Telco connectors


PART NO. DESCRIPTION ICPCSTMMzz¹ Male to male 25-Pair Telco cable


Male Male

50-Pin, 90O style, CMR rated, Category 3

90O Male Telco Cable 90O Female Telco Cable

MaleBlunt

76


OR

DS

& C

AB

LE A

SS

EM

BLI

ES


MODULAR PLUGS

STRANDED CAT 5e MODULAR PLUG• Accepts 24~26 AWG stranded wires

• Oval cable entry

• Package includes loading bar

PART NO. DESCRIPTIONICMP8P8C5E CAT 5e, 100 pcs.

STRANDED 8P8C MODULAR PLUG• Accepts 24~28 AWG stranded wires


PART NO. DESCRIPTIONICMP8P8CRD 8P8C, 100 pcs.


• Flat cable entry

PART NO. DESCRIPTIONICMP8P8CFT 8P8C, 100 pcs.

SOLID 8P8C MODULAR PLUG• Accepts 24~28 AWG solid wires


PART NO. DESCRIPTIONICMP8P8SRD 8P8C, 100 pcs.

SOLID AND STRANDED CAT 6 MODULAR PLUG• Accepts 24~26 23~24 AWG solid

and stranded wires



PART NO. DESCRIPTIONICMP8P8C6E CAT 6, 100 pcs.

SOLID AND STRANDED CAT 5e AND CAT 6 SHIELDED MODULAR PLUG• Protects from Electromagnetic

Interference

• Accepts 24~26 23~24 AWG solid and

stranded wires



PART NO. DESCRIPTIONICMP8P8C6S CAT 6, 100 pcs.







SOLID 6P6C MODULAR PLUG• Accepts 24~28 AWG solid wires


PART NO. DESCRIPTIONICMP6P6SRD 6P6C, 100 pcs.



PART NO. DESCRIPTIONICMP6P6CRD 6P6C, 100 pcs.


77

CORDS & CABLE ASSEMBLIES MODULAR PLUGS AND LINE CORDS



PART NO. DESCRIPTIONICMP4P4CHS 4P4C, 100 pcs.

FLAT LINE CORDAGE• Works with fl at entry plugs

• 26 AWG stranded copper wire

• 1000 feet per roll

PART NO. DESCRIPTIONIC1000S4SV 4-ConductorIC1000S6SV 6-Conductor

Color = Silver satin

MAKE CUSTOM LENGTH EXTENSION CORDS• Ideal for customizing extension cords for phone and data connectivity

• 50 micro inch gold plated contacts on modular plugs

• Each bag contains 100 plugs

• Factory made patch cords are recommended for consistent performance

STRANDED OR SOLID PLUGS• Always identify the cable types before selecting

the appropriate plug

• For fl at cables, choose fl at plugs

• For round cables, choose oval plugs

• For stranded cables, choose stranded plugs

• For solid cables, choose solid plugs

Loading bar

Termination tools

Page 109

Premise cable

Page 50

6P6C VOICE LINE CORD• 6-Position, 6-Conductor

• Pin 1 to 6

• Designed for phone connectivity

PART NO. DESCRIPTIONICLC6zzFSV¹ 6P6C

Length (zz¹) = 07, 14 and 25 feet Color = Silver satin

6P4C VOICE LINE CORD• 6-Position, 4-Conductor

• Pin 2 to 5

• Designed for phone connectivity

PART NO. DESCRIPTIONICLC4zzFSV¹ 6P4C

Length (zz¹) = 07, 14 and 25 feet Color = Silver satin

78


OR

DS

& C

AB

LE A

SS

EM

BLI

ES


VELCRO® BRAND CABLE TIES

VELCRO® BRAND ONE WRAP® CABLE TIES• Designed for secure cable fastening

• Quick, easy cable management and color-coding

• Comes individually perforated; tear off as needed


BULK VELCRO® BRAND CABLE TIES • 1 continuous roll; cut off as needed

• 75 feet per roll

• Durable material

VELCRO® BRAND ONE WRAP® CABLE TIE VALUEPACKS • Packaged in a resealable bag for easy storage



Velcro® Brand Cable TiesMake cable management and color coding quick and easy.

PART NO. DESCRIPTION A. ICACSVB8BK 8" L x 0.5" W, 100 pcs.B. ICACSVBTBK 12" L x 0.5" W, 100 pcs.

Color = BK

PART NO. DESCRIPTION A. ICACSV75BL 75' L x 0.5" W, 1 roll, blueB. ICACSV75BK 75' L x 0.5" W, 1 roll, black

Color = BL BK

PART NO. DESCRIPTION A. ICACSV08xx¹ 8" L x 0.5" W, 10 pcs.B. ICACSV12xx¹ 12" L x 0.5" W, 10 pcs.

Color (xx¹) = WH IV BL OR RD YL GY BK GN

8” length

12” length

8” length

12” length

Blue

Black


79

CORDS & CABLE ASSEMBLIES NYLON CABLE TIES

4” SUPPORTS 18 lb.

PART NO. ICACSS04BK Black ICACSS04NL Natural 100 pcs. per bag

5.5” SUPPORTS 18 lb.

PART NO. ICACSS55BK Black ICACSS55NL Natural 100 pcs. per bag


PART NO. ICACSM06BK Black ICACSM06NL Natural 100 pcs. per bag


PART NO. ICACSL75BK Black ICACSL75NL Natural 100 pcs. per bagPART NO. ICACSL7KBK Black ICACSL7KNL Natural 1000 pcs. per bag VALUEPACK


PART NO. ICACSS08BK Black ICACSS08NL Natural 100 pcs. per bagPART NO. ICACSS8KBK Black ICACSS8KNL Natural 1000 pcs. per bag VALUEPACK


PART NO. ICACSM85BK Black ICACSM85NL Natural 100 pcs. per bagPART NO. ICACSM8KBK Black ICACSM8KNL Natural 1000 pcs. per bag VALUEPACK


PART NO. ICACSL11BK Black ICACSL11NL Natural 100 pcs. per bagPART NO. ICACSL1KBK Black ICACSL1KNL Natural 1000 pcs. per bag VALUEPACK


PART NO. ICACSM12BK Black ICACSM12NL Natural 100 pcs. per bag


PART NO. ICACSL15BK Black ICACSL15NL Natural 100 pcs. per bag


PART NO. ICACSE15NL Natural 100 pcs. per bag

NYLON CABLE TIES• Durable and strong nylon material

• Loop tensile strength supports from 18 to 120 lb.

NYLON CABLE TIE VALUEPACKS• 1000 pieces packaged in a resealable bag

80

FIBER OPTIC SYSTEMFI

BE

R O

PTI

C S

YS

TEM

888.ASK.4ICC | [email protected] | icc.com | FOS

Enclosed Rack Mount Solutions • Fiber rack mount enclosures provide a safe and clean environment for installing fi ber on racks

Enclosed Wall Mount Solutions• Fiber wall mount enclosures are perfect for

installing fi ber in limited space

DIFFERENT WAYS TO INSTALL FIBER OPTICS

Wall mount enclosures

Page 89

Rack mount enclosures

Page 86

Lockable doors

Rear metal cover

Front metal cover

http://www.icc.com/c/23/fiber-optic-systems

81

FIBER OPTIC SYSTEM

Wall Outlet Solutions• Multimedia outlets are perfect for distributing fi ber to the Work Area

Rack Mount Panel Solutions

DIFFERENT WAYS TO INSTALL FIBER OPTICS

LC quad patch panels

Page 85

LC quad adapter panels

Plug and play MPO cassettes

Page 82


Multimedia boxes

Page 92Multimedia outlets

Page 93

Confi gurable slim bezelsConfi gurable bezels

MPO patch panels

MPO adapter panels

82


BE

R O

PTI

C S

YS

TEM


FIBER PLUG AND PLAY CASSETTES

MPO is a Multi-Fiber Push On connector

that is defi ned by IEC-61754-7 and TIA-604-

5-D. Multi-fi ber push on consist of 12 fi bers

per MPO plug. MTP* plug is backward

compatible with MPO plug.

*MTP is a registered trademark of US Conec

Push-pin style for quick installation

PLUG AND PLAY APPLICATION FEATURES• Supports 10G Ethernet, fi ber channel and link specifi cations

• Eliminates splicing, polishing and testing

• Saves signifi cant time and reduces overall installation costs

• Modular design for easy Moves, Adds, Changes (MACs)

• Confi gurable with fi ber enclosures and blank fi ber patch panels

LC fi ber plug and play cassette

Pre-terminated fi ber jumpers

Dust caps

3.56" D

PLUG AND PLAY CASSETTE FEATURES• 100% factory terminated and tested

• Low Insertion Loss of <0.5dB

• Made of high quality and durable aluminum

LC quad cassettes have 2 MPO and the duplex

cassettes have 1 MPO adapter on the rear

Rack mount enclosures

Page 87

MPO adapter MPO jumper


83

FIBER OPTIC SYSTEM FIBER PLUG AND PLAY CASSETTES

Cassettes sold separately

LC PLUG AND PLAY MPO CASSETTES, 12 FIBERS• 6 LC duplex adapters on the front with 1 MPO adapter on the rear

• Package includes dust caps and performance test results

PART NO. DESCRIPTIONA. ICFC12ML1G 6 LC duplex, multimode, 10G aqua, 50/125µm (OM3)B. ICFC12SLD9 6 LC duplex, single-mode, blue, 9/125µmC. ICFC12ML50 6 LC duplex, multimode, beige, 50/125µm (OM2)D. ICFC12MLD6 6 LC duplex, multimode, beige, 62.5/125µm (OM1)

SC PLUG AND PLAY MPO CASSETTES, 12 FIBERS• 6 SC duplex adapters on the front with 1 MPO adapter on the rear


PART NO. DESCRIPTIONA. ICFC12MS1G 6 SC duplex, multimode, 10G aqua, 50/125µm (OM3)B. ICFC12SSD9 6 SC duplex, single-mode, blue, 9/125µmC. ICFC12MS50 6 SC duplex, multimode, beige, 50/125µm (OM2)D. ICFC12MSD6 6 SC duplex, multimode, beige, 62.5/125µm (OM1)

HD LC QUAD PLUG AND PLAY MPO CASSETTES, 24 FIBERS• 6 LC quad adapters on the front with 2 MPO adapters on the rear


PART NO. DESCRIPTIONA. ICFC24ML1G 6 LC quad, multimode, 10G aqua, 50/125µm (OM3)B. ICFC24SLD9 6 LC quad, single-mode, blue, 9/125µmC. ICFC24ML50 6 LC quad, multimode, beige, 50/125µm (OM2)D. ICFC24MLD6 6 LC quad, multimode, beige, 62.5/125µm (OM1)

A. B.

C. D.

A. B.

C. D.

A. B.

C. D.

PART NO. DESCRIPTIONICFORPP1RM 3-Panel, 1 RMS*ICFORPP2RM 6-Panel, 2 RMS*


RACK MOUNT PLUG AND PLAY CASSETTES WITH BLANK FIBER PATCH PANELS• Fits standard 19” EIA rack mount widths


84


BE

R O

PTI

C S

YS

TEM


FIBER ADAPTER PANELS

*MM=Multimode, SM=Single-mode

LC ADAPTER PANEL, 12 FIBERS• 6 duplex LC blue adapters

• LC to LC

PART NO. DESCRIPTIONICFOPL16BK Ceramic sleeves support MM/SM*

HD MPO ADAPTER PANEL, 72 FIBERS• 6 MPO black adapters

• MPO to MPO

• Key up to key down

PART NO. DESCRIPTIONICFOPM26BK 6-Ports, MM/SM*

HD LC QUAD ADAPTER PANEL, 24 FIBERS• 6 quad LC aqua adapters

• LC to LC

PART NO. DESCRIPTIONICFOPL161G Ceramic sleeves support MM/SM*

Metal sleeves support MM*

HD MPO ADAPTER PANEL, 72 FIBERS• 6 MPO aqua adapters

• MPO to MPO


PART NO. DESCRIPTIONICFOPM261G 6-Ports, MM/SM*

SC ADAPTER PANEL, 6 FIBERS• 6 simplex SC blue adapters

• SC to SC

PART NO. DESCRIPTIONICFOPS16BK Metal sleeves support MM*

ICFOPS26BK Ceramic sleeves support MM/SM*

MPO ADAPTER PANEL, 48 FIBERS 96 FIBERS• 4 MPO black adapters

• MPO to MPO


PART NO. DESCRIPTIONICFOPM24BK 4-Ports, MM/SM*

SC ADAPTER PANEL, 12 FIBERS• 6 duplex SC blue adapters

• SC to SC

PART NO. DESCRIPTIONICFOPC16BK Metal sleeves support MM*

ICFOPC26BK Ceramic sleeves support MM/SM*

ST ADAPTER PANEL, 6 FIBERS• 6 simplex ST metal adapters

• ST to ST

PART NO. DESCRIPTIONICFOPT16BK Metal sleeves support MM*

ICFOPT26BK Ceramic sleeves support MM/SM*

ST ADAPTER PANEL, 8 FIBERS• 8 simplex ST metal adapters

• ST to ST

PART NO. DESCRIPTIONICFOPT18BK Metal sleeves support MM*

ICFOPT28BK Ceramic sleeves support MM/SM*

ST TO SC ADAPTER PANEL, 12 FIBERS• 6 duplex ST to SC metal adapters

• ST to SC

PART NO. DESCRIPTIONICFOPR16BK Metal sleeves support MM*

ICFOPR26BK Ceramic sleeves support MM/SM*

BLANK ADAPTER PANEL• Covers unused panel openings

PART NO. DESCRIPTIONICFOPB00BK Blank

4-PORT BLANK ADAPTER PANEL• Confi gurable with EZ® and HD

data, voice, audio, video and fi ber

optic modular connectors

PART NO. DESCRIPTIONICFOPJ04BK 4-Ports

144 FIBERS

144 FIBERS


85

FIBER OPTIC SYSTEM FIBER PATCH PANELS

Push-pins allow for easy removal and

installation of adapter panels

4-Port blank adapter panel is confi gurable

with fi ber optic modular couplers

All adapter panels come with protective

caps to prevent dust from entering

HD LC QUAD FIBER PATCH PANEL, 96 FIBERS• Patch panel loaded with 24 LC to LC quad adapters


• Package includes dust caps and #12 rack screws

PART NO. DESCRIPTION ICFP96ML1G LC quad patch panel, aqua adapters,1 RMS*

HD MPO FIBER PATCH PANELS, 288 FIBERS 576 FIBERS• Patch panel loaded with 24 MPO to MPO adapters


• Package includes dust caps and #12 rack screws


PART NO. DESCRIPTION A. ICFP24MP1G MPO patch panel, aqua adapters, 1 RMS*B. ICFP24MPBK MPO patch panel, black adapters, 1 RMS*

A.

B.

BLANK FIBER PATCH PANELS• Confi gurable with fi ber adapter panels and plug and play cassettes



PART NO. DESCRIPTION A. ICFORPP1RM 3 panel, 1 RMS*B. ICFORPP2RM 6 panel, 2 RMS*


A.

B.

Fast and Flexible Installations

86


BE

R O

PTI

C S

YS

TEM


FIBER RACK MOUNT ENCLOSURES

SLIDE-OUT FIBER OPTIC RACK MOUNT ENCLOSURE WITH REMOVABLE FRONT AND REAR METAL COVERS, 6 PANEL• Holds up to 6 adapter panels and 1 splice tray 2 splice trays

• Slide-out tray with front and rear metal covers


PART NO. DESCRIPTIONB. ICFORE62RM 6 panel, 3.50" H x 17" W x 12.6" D, 3 RMS* 2 RMS*




PART NO. DESCRIPTIONC. ICFORET4RM 12 panel, 7.00" H x 17" W x 12.6" D, 4 RMS*

SPLICE TRAY• Supports 12 fi bers with fusion sleeves

• Designed to work with the fi ber optic enclosures with removable front

and rear metal covers; see above

PART NO. DESCRIPTIOND. ICFOSKFM12 12 splice





PART NO. DESCRIPTIONA. ICFORE31RM 3 panel, 1.75" H x 17" W x 12.6" D, 1 RMS*

A.

B.

C.

D.

Easy Front and Rear AccessFiber enclosures are designed with removable front and rear metal covers.

Push-pins

All enclosures have a 3.651" depth starting from the mounting rail to the front 3.651" D

Rear Front


87

FIBER OPTIC SYSTEM FIBER RACK MOUNT ENCLOSURES

SLIDE-OUT FIBER OPTIC RACK MOUNT ENCLOSURE, 3 PANEL• Holds up to 3 adapter panels and 1 small or large splice tray

• Slide-out tray with removable front transparent fl exi-panel door

• Package includes:

- 7 fi ber saddles, 4 hook and loop ties and #12 rack screws

PART NO. DESCRIPTIONB. ICFOR103BK 3 panel, 1.75" H x 17" W x 14" D, 1 RMS*

SLIDE-OUT FIBER OPTIC RACK MOUNT ENCLOSURE, 4 PANEL• Holds up to 4 adapter panels and 4 small or 2 large splice trays

• Slide-out tray with swing-down front transparent fl exi-panel door


- 2 cable management spools and 7 fi ber saddles

- 4 nylon ties, 4 hook and loop ties and #12 rack screws

- 1 grounding lug

PART NO. DESCRIPTIONC. ICFOR204BK 4 panel, 3.50" H x 17" W x 14" D, 2 RMS*






- 1 grounding lug

PART NO. DESCRIPTIOND. ICFOR306BK 6 panel, 5.25" H x 17" W x 14" D, 3 RMS*

SWING-OUT FIBER OPTIC RACK MOUNT ENCLOSURE, 2 PANEL• Holds up to 2 adapter panels and 1 small or large splice tray

• Swing-out tray with open front

• Package includes 8 nylon ties, 2 hook and loop ties and #12 rack screws

PART NO. DESCRIPTIONA. ICFOR102BK 2 panel, 1.75" H x 17" W x 11" D, 1 RMS*






- 1 grounding lug

PART NO. DESCRIPTIONE. ICFOR412BK 12 panel, 7.00" H x 17" W x 14" D, 4 RMS*


A.

B.

C.

D.

E.

88


BE

R O

PTI

C S

YS

TEM


FIBER RACK MOUNT ENCLOSURES

FIBER OPTIC SPLICE RACK MOUNT ENCLOSURE• 1 slide-out tray with front transparent fl exi-panel door

• Tray comes with 1 universal splice tray; holds up to 4


- 7 fi ber saddles, 12 nylon ties and 1 fastener strip

- 1 grounding lug and #12 rack screws

PART NO. DESCRIPTIONB. ICFORS3096 96 splice, 5.25" H x 17" W x 14" D, 3 RMS*

FIBER OPTIC SPLICE RACK MOUNT ENCLOSURE• 1 slide-out tray with front transparent fl exi-panel door

• Tray comes with 6 universal splice trays; holds up to 8


- 7 fi ber saddles, 12 nylon ties and 1 fastener strip

- 1 grounding lug and #12 rack screws

PART NO. DESCRIPTIONC. ICFORS4192 192 splice, 7.00" H x 17" W x 14" D, 4 RMS*

FIBER OPTIC RACK MOUNT ENCLOSURE, 4 PANEL• 2 slide-out trays with front transparent fl exi-panel door

• Top tray holds up to 4 adapter panels

• Bottom tray comes with 1 universal splice tray; holds up to 4


- 14 fi ber saddles

- 8 nylon ties, 8 hook and loop ties

- 2 grounding lugs and #12 rack screws

PART NO. DESCRIPTIONA. ICFOR444BK 4 panel, 96 splice, 7.00" H x 17" W x 14" D, 4 RMS*

LOADED FIBER OPTIC RACK MOUNT ENCLOSURE WITH ST ADAPTERS• Enclosure comes loaded with 24 simplex ST to ST metal adapters

• Holds 1 large splice tray



- 7 fi ber saddles, 2 nylon ties, 4 hook and loop ties and #12 rack screws

PART NO. DESCRIPTIONE. ICFORST024 24 simplex ST adapters, 1.75" H x 17" W x 14" D, 1 RMS*


LOADED FIBER OPTIC RACK MOUNT ENCLOSURE WITH SC ADAPTERS• Enclosure comes loaded with 24 simplex SC to SC blue adapters

• Holds 1 large splice tray



- 7 fi ber saddles, 2 nylon ties, 4 hook and loop ties and #12 rack screws

PART NO. DESCRIPTIOND. ICFORSC024 24 simplex SC adapters, 1.75" H x 17" W x 14" D, 1 RMS*

A.

B.

C.

D.

E.


89

FIBER OPTIC SYSTEM FIBER WALL MOUNT ENCLOSURES

SINGLE DOOR FIBER OPTIC WALL MOUNT ENCLOSURE, 2 PANEL• Holds up to 2 adapter panels and 1 small splice tray

• Single door design


- 2 cable management spools and 4 nylon ties

- 4 standoff harness clips and 4 split fl at cable clamps with adhesive base

PART NO. DESCRIPTIONB. ICFOD102BK 2 panel, single door, 13" H x 9.25" W x 3.5" D

SINGLE DOOR FIBER OPTIC WALL MOUNT ENCLOSURE, 4 PANEL• Holds up to 4 adapter panels and 1 small splice tray



- 2 cable management spools and 4 nylon ties

- 4 standoff harness clips and 4 split fl at cable clamps with adhesive base

PART NO. DESCRIPTIONC. ICFOD104BK 4 panel, single door, 13" H x 11.5" W x 3.5" D

DUAL DOOR FIBER OPTIC WALL MOUNT ENCLOSURE, 2 PANEL• Holds up to 2 adapter panels and 1 small splice tray

• Dual door design; the inner door is designed with a cam lock

• Comes with a built-in and adjustable cable management spool


- 2 nylon ties, 2 hook and loop ties and 2 keys

PART NO. DESCRIPTIOND. ICFOD202BK 2 panel, dual doors, 10.2" H x 12" W x 3.5" D

SINGLE DOOR FIBER OPTIC WALL MOUNT ENCLOSURE, 4 PANEL• Holds up to 4 adapter panels

• Holds 1 splice tray; 12 splice 2 splice trays;12 splices per tray



- 4 nylon ties, 4 hook and loop ties

PART NO. DESCRIPTIONA. ICFODE41WM 4 panel, single door with lock, 10.75" H x 13" W x 3.5" D ICFOSKFM12 12 splice, splice tray (not pictured)

DUAL DOOR FIBER OPTIC WALL MOUNT ENCLOSURE, 4 PANEL• Holds up to 4 adapter panels and 1 small splice tray

• Dual door design; the outer door is designed with a cam lock and the

inner door is designed with a hasp for an optional lock


- 2 cable management spools

- 4 nylon ties and 2 hook and loop ties

- 1 grounding lug and 2 keys

PART NO. DESCRIPTIONE. ICFOD204BK 2 panel, dual doors, 10.8" H x 12" W x 4.0" D

A.

B.

C.

D.

E.

90


BE

R O

PTI

C S

YS

TEM


FIBER SPLICE TRAYS

10G Fiber Optic JumpersLaser optimized aqua fi ber jumpers to support 10G/40G/100G applications, MPO, LC, and SC in a variety of confi gurations and lengths

Page 94

LARGE 24 SPLICE TRAY KIT• Two-piece design for cover and base

• Works with fi ber rack mount enclosures only


- Side holders for bare fusion

- Fusion with sleeve and mechanical splice ribbon fusion

- 4 nylon ties and 4 adhesive hook and loop buttons

PART NO. DESCRIPTIONICFOSTFM24 24 splice, large tray, 11.15" H x 4.00" W x .44" D

SMALL 12 SPLICE TRAY KIT• Two-piece design for cover and base

• Works with fi ber rack and wall mount enclosures


- Side holders for bare fusion

- Fusion with sleeve and mechanical splice ribbon fusion

- 4 nylon ties and 3 adhesive hook and loop buttons

PART NO. DESCRIPTIONICFOSTFM12 12 splice, small tray, 5.95" H x 4.67" W x 0.38" D

UNIVERSAL 24 SPLICE TRAY KIT FOR SPLICE ENCLOSURES• Two-piece design for cover and base

• Works with splice fi ber rack mount enclosures


- 2 left and 2 right mechanical fusion sleeves

- 2 left and 2 right position fusion sleeves

- 4 nylon ties

PART NO. DESCRIPTIONICFOSTUF24 24 splice, 10.66" H x 4.50" W x .4" D

SPLICE TRAY• Supports 12 fi bers with fusion sleeves

• Designed to work with the fi ber optic enclosures with removable front

and rear metal doors

PART NO. DESCRIPTIONICFOSKFM12 12 splice



91

FIBER OPTIC SYSTEM FIBER OPTIC COUPLERS

FIBER OPTIC MODULAR COUPLERS HD STYLE• Female to female couplers


• Designed with ceramic sleeves

• Supports multimode and single-mode


A. IC107LC2xx¹ LC duplex couplers, ceramic sleeves 50 / 400

B. IC107SC2xx¹ SC simplex couplers, ceramic sleeve 50 / 400

C. IC107ST2xx¹ ST simplex couplers, ceramic sleeve 50 / 400


A.

B.

C.

FIBER OPTIC COUPLERS• Female to female couplers


• Joins two fi ber cables

PART NO. DESCRIPTION A. ICFOA5MM02 LC to LC duplex, ceramic sleeves, MM/SM* B. ICFOA8MM01 SC to SC simplex, metal sleeve, MM* ICFOA8SM01 SC to SC simplex, ceramic sleeve, MM/SM*

C. ICFOA8MM02 SC to SC duplex, metal sleeves, MM* ICFOA8SM02 SC to SC duplex, ceramic sleeves, MM/SM*

D. ICFOA7MM01 ST to ST simplex, metal sleeve, MM* ICFOA7SM01 ST to ST simplex, ceramic sleeve, MM/SM*

E. ICFOA9MM02 SC to ST duplex, metal sleeves, MM* ICFOA9SM02 SC to ST duplex, ceramic sleeves, MM/SM*

*MM=Multimode, SM=Single-mode

A.

C.

E.

B.

D.

92


BE

R O

PTI

C S

YS

TEM


ELITE MULTIMEDIA OUTLETS AND BOXES


IC108BF1xx¹1-Port, fl at

IC108BF2xx¹2-Ports, fl at

IC108BA1xx¹1-Port, angled

IC108BA2xx¹2-Ports, angled

IC108BFBxx¹Blank, fl at

IC108BFCxx¹SC to SC duplex, fl at

IC108BFDxx¹2 SC to SC duplex, fl at

IC108BACxx¹SC to SC duplex, angled

IC108BFTxx¹ST to ST duplex, fl at

IC108BFBxx¹SC to ST duplex, fl at


ICFOBWLBxx2

LC to LC duplexICFOBWCBxx2

SC to SC duplexICFOBWTBxx2

ST to ST duplex

Color (xx2) = WH IV GY

FIBER OPTIC SLIM BEZELS WORK WITH MULTIMEDIA OUTLETS

BLANK AND FIBER OPTIC ELITE™ BEZELS WORK WITH MULTIMEDIA OUTLETS AND BOXES

All fi ber optic bezels are designed with metal sleeves

MUTOA ELITE™ MULTIMEDIA BOXESPackage includes:

• Cover and base



• Adhesive strips and wood screws for mounting


8.50" W

8.67" H

2.41" D

1-Bezel openingCircuit identifi cation label

6-Bezel openings

Knockouts on top and bottom work with raceway

Magnets (optional)

PART NO. DESCRIPTIONIC108MMBxx¹ MUTOA multimedia box with 7 Elite bezel openings


93

FIBER OPTIC SYSTEM ELITE MULTIMEDIA OUTLETS AND BOXES

SINGLE GANG ELITE™ MULTIMEDIA OUTLETSPackage includes:

• Cover and base




DOUBLE GANG ELITE™ MULTIMEDIA OUTLETSPackage includes:

• Cover and base





6" W1" D3 slim bezel openings

4-Bezel openings


4.45" W

7.50" H

1" D

PART NO. DESCRIPTIONIC108WBDxx¹ Double gang multimedia outlet with 4 Elite and 3 slim bezel openings

PART NO. DESCRIPTIONIC108WBSxx¹ Single gang multimedia outlet with 2 Elite and 2 slim bezel openings

2 slim bezel openings

2-Bezel openings


Fits double gang outlet

Confi gurable with EliteTM bezels

7.50" H

94


BE

R O

PTI

C S

YS

TEM


FIBER CABLE ASSEMBLIES

3D-Mesh

30,280

Surface Contour5100

5400

5700

6000

(nm)

0.050.0

100.0150.0

200.0(um

)

5400

5700

6000

(nm)

0.0 50.0 100.0 150.0 200.0(um)

Height

6254 nm

Length

0 um

Live Image

PASS

Surface Detail400

440

480

520 (nm

)

0.050.0

100.0150.0

200.0(um

)

440

480

520 (nm)

0.0 50.0 100.0 150.0 200.0 (um)

Height

497 nm

Length

0 um 4005100

Fiber optic cable assemblies are factory built, terminated, and tested to ensure results exceeding ANSI/

TIA-568-C.3 performance standards. Cable assemblies are factory tested to an average Insertion Loss of

0.3dB, the lowest in the industry.

10G 50/125µm MULTIMODE FIBER JUMPERS, OFNR RISER RATED

CONNECTOR TYPE 50/125µm SIMPLEX 50/125µm DUPLEX

LC to LC ICFOJ1G6zz1 ICFOJ1G7zz1

LC to SC ICFOJ2G6zz1 ICFOJ2G7zz1

LC to ST ICFOJ8G6zz1 ICFOJ8G7zz1

Length (zz¹) = 01, 02, 03, 05, 07 and 10 meters (1 meter = 3.28 feet) Note: Housing boot and clip colors may vary

10G LC to SC10G LC to LC 10G SC to SC

MPO FIBER JUMPERS, OFNP PLENUM RATED, 12 FIBERS

CONNECTOR TYPE SIMPLEX

10G MPO to MPO, multimode, 50/125µm ICFOJATGzz1

MPO to MPO, multimode, 50/125µm ICFOJA55zz1

MPO to MPO, multimode, 62.5/125µm ICFOJA55zz1

MPO to MPO, single-mode 9/125µm ICFOJATSzz1


MPO to MPO 50/125µm and 62.5/125µm

10G MPO to MPO MPO to MPO 9/125µmMPO to MPO 9/125µm


95

FIBER OPTIC SYSTEM FIBER CABLE ASSEMBLIES

MULTIMODE FIBER JUMPERS, OFNR RISER RATED

CONNECTOR TYPE 50/125µm SIMPLEX 50/125µm DUPLEX 62.5/125µm SIMPLEX 62.5/125µm DUPLEX

LC to LC ICFOJ1M6zz1 ICFOJ1M7zz1 ICFOJ1M2zz1 ICFOJ1M3zz1

LC to SC ICFOJ2M6zz1 ICFOJ2M7zz1 ICFOJ2M2zz1 ICFOJ2M3zz1

LC to ST - ICFOJ3M7zz1 - ICFOJ3M3zz1

SC to SC ICFOJ8C6zz1 ICFOJ8C7zz1 ICFOJ8C2zz1 ICFOJ8C3zz1

SC to ST ICFOJ9C6zz1 ICFOJ9C7zz1 ICFOJ9C2zz1 ICFOJ9C3zz1

ST to ST ICFOJ7C6zz1 ICFOJ7C7zz1 ICFOJ7C2zz1 ICFOJ7C3zz1


LC to LC

SC to STSC to SC ST to STSC to ST

LC to LCLC to LC

SC to SC

SINGLE-MODE FIBER JUMPERS, OFNR RISER RATED

CONNECTOR TYPE 9/125µm SIMPLEX 9/125µm DUPLEX

LC to LC ICFOJ1M4zz1 ICFOJ1M5zz1

LC to SC ICFOJ2M4zz1 ICFOJ2M5zz1

LC to ST - ICFOJ3M5zz1

SC to SC ICFOJ8C4zz1 ICFOJ8C5zz1

SC to ST ICFOJ9C4zz1 ICFOJ9C5zz1

ST to ST ICFOJ7C4zz1 ICFOJ7C5zz1


LC to LC

SC to STSC to SC ST to STSC to ST

LC to LCLC to LC

SC to SC

LC to ST

LC to SC LC to ST

LC to SC

96

RESIDENTIAL ENCLOSURESR

ES

IDE

NTI

AL

EN

CLO

SU

RE

S

888.ASK.4ICC | [email protected] | icc.com | SRS

NET.MEDIA CENTERSTM

14", 21" and 28" Combos• Ideal solution for small and single-family homes

• Designed to be stud mounted

• Enclosure is compatible with most major brand modules

• Cables pictured are optional

Voice module• 8-Ports, bridged IDC

• Up to 4 incoming

phone lines

• Up to 8 extensions

• Built-in RJ31X

• Built-in expansion port

Rubber grommets protect

cable from damage

The door has a hinged design and can

be reversed to swing open left or right

Extendable mounting tabs work with

different spacing between wall studs

Includes top, bottom, rear and side

2" knockouts for routing cable

Knockout for an optional

door lock with key

CAT 6 data module• 8-Ports

• TIA Category 6 rated

• 50 micro-inch gold

plated contacts

Video splitter module• 1 input x 6 outputs

• 2 GHz, 5~2300 MHz bandwidth

Door latch

14" Combo• 14" H x 14.25" W x 3.68" D

• Modules packaged separately

NET.MEDIA CENTER COMBO REFERENCE GUIDE

ENCLOSURE PART NO. VOICE PORTS DATA PORTS VIDEO PORTS

14" ICRESDC14K 8 8, CAT 6 6, 2 GHz

14" ICRESDC14D 8 - 6, 2 GHz



14" PART NO. DESCRIPTIONICRESDC14K* Enclosure and hinged door with voice, CAT 6 data and 1 x

6 video splitter modules

ICRESDC14D* Enclosure and hinged door with voice and 1 x 6 video split-ter modules

ICRESDC14E* Enclosure and hinged door

ICRESDC14H Hinged doorICRESDR14H

*Includes grommets, rubber bumpers and mounting hardware

http://www.icc.com/c/27/residential-enclosures

97

RESIDENTIAL ENCLOSURES NET.MEDIA CENTERSTM

Rubber bumpers

20 Gauge steel

Includes knockouts for optional AC power outlets

All enclosures are designed with measurements on

each side for accurate installation between studs

21" Combo• 21" H x 14.25" W x 3.68" D


28" Combo• 28" H x 14.25" W x 3.68" D


28" PART NO. DESCRIPTIONICRESDC28K* Enclosure and hinged door with voice, CAT 6 data

and 1 x 6 video splitter modules



21" PART NO. DESCRIPTIONICRESDC21K* Enclosure and hinged door with voice, CAT 6 data

and 1 x 6 video splitter modules



*Includes grommets, rubber bumpers and mounting hardware

Modules can be mounted

vertically or horizontally

98


ES

IDE

NTI

AL

EN

CLO

SU

RE

S


NET.MEDIA CENTERSTM

9", 8" and Mini Combos• Ideal solution for apartments, condos, remodels and retrofi ts

• Can be surface or stud mounted

• 9" enclosure is compatible with most major brand modules

• Package includes mounting hardware

• Cables pictured are optional



phone lines


• Built-in RJ31X

• Built-in expansion port

CAT 6 data module• 8-Ports

• TIA Category 6 rated


plated contacts

CATV module• 1 input x 6 outputs

• 2 GHz, 5~2300 MHz bandwidth

Designed with a pad lock

option for additional security

9.4" H

9" Combo• 9.4" H x 15.10" W x 4.9" D


Tough ABS plastic

Includes knockouts for

optional AC power outlets

9" and 8" enclosures are designed with measurements

on each side for accurate installation between studs

NET.MEDIA CENTER COMBO REFERENCE GUIDE

ENCLOSURE PART NO. VOICE PORTS DATA PORTS VIDEO PORTS

9" ICRESDC9PK 8 8, CAT 6 6, 2 GHz

9" ICRESDC9PD 8 - 6, 2 GHz

8" ICRDSMMBK8 8 - 6, 2 GHz

Mini ICRDSMMBK1 8 8, CAT 5e 4, 1 GHz

Mini ICRDSMMBD1 8 - 4, 1 GHz

9" PART NO. DESCRIPTIONICRESDC9PK Cover and base with voice, CAT 6 data and 1 x 6 video splitter modules

ICRESDC9PD Cover and base with voice and 1 x 6 video splitter modules


99

RESIDENTIAL ENCLOSURES NET.MEDIA CENTERSTM

Mini PART NO. DESCRIPTIONICRDSMMBK1 Cover and base with voice, CAT 5e data and 1 x 4 video splitter modules

ICRDSMMBD1 Cover and base with voice and 1 x 4 video splitter modules

8" ValuePackPART NO. ICRDSMMBK8

DESCRIPTION

• Cover and base, 6 pcs.

• Voice module, 6 pcs.

• 1 x 4 splitter, 6 pcs.• 1 x 6 splitter, 6 pcs.

• Mounting hardware

• Only available in 6 pack

CAT 5e data module• 8-Ports

• TIA Category 5e rated


plated contacts

Designed with a pad lock

option for additional security

Screw-down cover option

Extendable mounting tabsSnap-on cover

Open space for

additional modules

8" Combo 6 Pack• 8" H x 15.10" W x 4.9" D


Mini Combo• 7.5" H x 6.5" W x 3.5" D

CATV module• 1 input x 4 outputs

• 5 MHz - 1 GHz bandwidth

2" knockouts for routing cable

7.50" H

8" H



phone lines


100


ES

IDE

NTI

AL

EN

CLO

SU

RE

S


42" Enclosure• 42" H x 14.25" W x 3.68" D

• Ideal solution for custom homes

• Designed to be stud mounted

• Enclosure is compatible with most major brand modules

PART NO. ICRESDC42E

Ample room for modules

and upgrades

Surface screw mounts

have a recessed design

preventing screws from

interfering when modules

mount over them

All enclosures are designed with measurements on

each side for accurate installation between studs

Vertical and horizontal

cable tie anchor points

All doors are packaged

separately for protection

while enclosure is being

installed

NET.MEDIA CENTERSTM

Knockout for an optional

door lock with key

42" H


101

RESIDENTIAL ENCLOSURES

Confi gure Your 42" Net.Media Center

Universal electronics bracket

Page 105

NET.MEDIA CENTERSTM

Covers to conceal cable

Page 105

RCA modular connectors for

component audio and video

Voice modules

Page 102

Data modules

Page 103

Door lock for added security

Fiber optic modular couplers for

high bandwidth applications

Speaker modular connectors for

whole house audio

HDMI modular couplers for high

defi nition audio and video

Data modular connectors for

multi-user computer networking

Multi-media patch panels Page 105

102


ES

IDE

NTI

AL

EN

CLO

SU

RE

S


VOICE MODULES

WWW.ICC.COM

FRO

M S

OUR

CE

OUTPUTEXPANSION

1 8

Warning!RJ-45 plug only.R TELEPHONE.r socket may be d

SECURITYRJ31X

Telephone Module ICRESVPA3CWWW.ICC.COM

Telephone Expansion Module ICRESVPA3C

OUTPUTEXPANSION

FROMSOURCE

1 8

Phone Wiring Diagram

To security board if available

Voice module Voice expansion module

Additional lines

Wall outlets

Phones

Incoming phone line

6 in. 8P8C jumper cord

To additional locations if required

Line cords

Premise cable

VOICE MODULES• 8-Ports, bridged IDC

• Supports up to 4 incoming phone lines and up to 8 extensions per line

• Built-in RJ31X and expansion port

ICRESVPA3CPCB board design

ICRESVPA2CLight weight ABS plastic bracket

ICRESVPA1CSteel bracket

VOICE EXPANSION MODULES• 8-Ports, bridged IDC

• For an additional 8 extensions per phone line

• Built-in RJ31X and expansion port source

ICRESVPB3CPCB board design

ICRESVPB2CLight weight ABS plastic bracket

ICRESVPB1CSteel bracket




103

RESIDENTIAL ENCLOSURES DATA MODULES

WWW.ICC.COM

1 3 5 7

2 4 6 8

PORT1

PORT8

CAT 5e Data Module

ICRE

SDPA

3C

TIA-568A Wiring

INTERNET 1 2 3 4 5 6 7 8

Data Wiring Diagram

WIRE DATA MODULE TO T568ATIA-570 residential wiring standard specifi es T568A color

code wiring as the standard for residential installations.

BrownBrown / White

GreenGreen / White

Orange / White

Blue / WhiteBlue

Orange

Data module

12 Volt DCSwitch / Router

Internet

Online gaming consoles

Patch cords

Premise cable

CAT 6 DATA MODULES• 8-Ports, 110-Type IDC

• Supports up to 8 computers

• Exceeds TIA Category 6 performance standards

CAT 5e DATA MODULES• 8-Ports, 110-Type IDC

• Supports up to 8 computers

• Exceeds TIA Category 5e performance standards

ICRESDPB3CPCB board design

ICRESDPB2CLight weight ABS plastic bracket

ICRESDPB1CSteel bracket

ICRESDPA3CPCB board design

ICRESDPA2CLight weight ABS plastic bracket

ICRESDPA1CSteel bracket



Computers

104


ES

IDE

NTI

AL

EN

CLO

SU

RE

S


VIDEO MODULES

Antenna CATV

Televisions Incoming service

Video Splitter Module, 1 input x 8 outputs

Video Wiring Diagram

VIDEO SPLITTER MODULES• Supports 2 GHz, 5~2300 MHz bandwidth

• Light weight metal bracket

ICRESAV42L1 input x 4 outputs



COMBO VIDEO SPLITTER AND VOICE MODULES• Video splitter supports 2 GHz, 5~2300 MHz bandwidth

• Voice module, 8-Ports, bridged IDC, supports up to 4 incoming phone lines and up to 8 extensions per line

• Steel bracket

ICRES8V42S1 input x 4 output video



Wall outlets Coaxial cable




105

RESIDENTIAL ENCLOSURES ACCESSORIES

ELECTRICAL POWER STRIP 125V• Provides power for up to 6 separate devices

• Protects from power surges

• 14 AWG x 3, 3' length power cord

PART NO.ICRESPSB07

4-PORT EZ MULTI-MEDIA PATCH PANELS• Confi gurable with EZ® voice, data and

video modular connectors


PART NO.ICRESBMP04

CABLE MANAGEMENT COVER• Designed to conceal cable

• Make installations look clean

• Steel construction

PART NO.ICRESCMC06

UNIVERSAL ELECTRONICS BRACKET• Designed to hold electronics

• Modems, routers, switches

• Steel bracket

PART NO.ICRESDCBUM

COMPACT 1X4 VIDEO SPLITTERS• 1 input x 4 outputs

• Supports 2 GHz, 5~2050 MHz

• Use in confi ned locations

• Screw mount on fl at surfaces

PART NO. ICRESVS42G

PROTECTIVE PLASTIC AND RUBBER GROMMETS• Install in enclosure knockouts to protects cable from damage


DOOR LOCK AND KEYS• Install on 14", 21", 28" and 42" Net.Media Center doors

• Prevents unwanted access

• Provides added security

PART NO. ICRDSDC2LK

ICRESDCAC2 RubberPART NO. ICRESDCAC3 Plastic

6-PORT HD MULTI-MEDIA PATCH PANELS• Confi gurable with HD voice, data and

video modular connectors


PART NO.ICRESBMP06

Integrated Residential OutletsIntegrated faceplates with voice, data and video connectivity built in. Their is no assembly required and no need to shop for additional components.

Page 10

ICRDSDCAC2

106

TOOLS & ACCESSORIESTO

OLS

& A

CC

ES

SO

RIE

S

888.ASK.4ICC | [email protected] | icc.com | TAS

JACKEASY™ TERMINATION TOOL

PART NO. DESCRIPTIONICACSPDTEH JackEasy termination tool with EZ® and HD blades ICACS8WUEH EZ and HD replacement bladesICACSBAGJE Holster bag

JACKEASYTM TERMINATION TOOL

Step 1A. Strip approximately 1.50" of the jacket

and separate the wires

B. Choose between T568A or T568B wiring

C. Sort out wires and place into IDC

Note: For maximum performance, minimize

the untwisting of individual pairs to 0.125"

Step 2

Switch Blades

B. Insert the module into the JackEasy tool and terminate all 4 pairs of wires at the same time. The tool is designed with a floor base; use the floor or any flat surface for support when terminating.

C. The JackEasy is designed with an anti-slip grip making it easy to hold and control.

Use a flat head screw driver to remove and switch between EZ and HD blades. The floor base is designed with blade storages on both sides.

HOLSTER BAGICACSBAGJE

A. Match the "V" shaped logo on the top of the connector to the inner chamber wall; HD faces sideways (pictured below) and EZ faces forward.

http://www.icc.com/c/26/tools-accessories

107

TOOLS & ACCESSORIES PUNCH-DOWN TOOLS

110 AND 66 SINGLE BLADE PUNCH-DOWN TOOLPART NO. DESCRIPTIONICACSPDT00 Single blade punch-down tool with 110 and 66 bladesICACS110RB 110 replacement bladeICACS066RB 66 replacement blade

HANDHELD TERMINATION AID• Helps terminate EZ® and HD modules and 110 patch plugs

• Provides a base for termination

• Prevents modules or plugs from slipping out of hands

PART NO. ICACSHTA01

The handheld aid can also be screwed down to the work table

Blade storage

110 wiring termination 66 wiring termination

Flip the patch panel and use the

bracket as a base for terminating

108


OLS

& A

CC

ES

SO

RIE

S


PUNCH-DOWN TOOLS

50 kgs impact force

Anti-slip rubber with raised grip prevents hand slippage

Simultaneously terminates and trims 4 pairs of wires

110 4-PAIR PUNCH-DOWN TOOL

PART NO. DESCRIPTIONICACSPDT4P 110 4-Pair punch-down toolICACS04PH5 110 4-Pair replacement blade

110 5-PAIR PUNCH-DOWN TOOL

PART NO. DESCRIPTIONICACSPDT05 110 5-Pair punch-down toolICACS05PRH 110 5-Pair replacement blade

Tip of the shaft engages the blade set eliminating

the possibility of blade misalignment

80 kgs of impact force to terminate 5 pairs

of wires simultaneously

The blade is reversible to hide the cutting edge, permitting the tool

to be used for termination without trimming wires


109

TOOLS & ACCESSORIES STRIPPING AND CRIMPING TOOLS

HEAVY DUTY MODULAR CRIMPING TOOL• Designed to crimp 8-Position 8-Conductor modular plugs

• Built-in steel blade strips and cuts cable

• Steel frame construction and long lasting use

• Rubber handle provides comfortable termination

PART NO. ICACSCT845

UNIVERSAL MODULAR CRIMPING TOOL• Designed to crimp 4, 6 and 8-Position modular plugs

• Built-in steel blade strips and cuts cable


PART NO. ICACSCT864

CATV COAX CABLE STRIPPER TOOL• For stripping RG-58, RG-59, RG-6 and RG-6 quad coax cable

• No cassettes needed, 3 blade types

• Includes an allen wrench to adjust blade positions

• Knife-like blades for high quality stripping

PART NO. ICACSCSCTV

UTP AND COAX CABLE STRIPPER TOOLS

PART NO. DESCRIPTIONA. ICACSTSUCD Deluxe stripper tool

• Strips UTP, STP and coax cable

• 5~06.2mm wire diameter

• RG-59, RG-6, RG-7 and RG-11

B. ICACSTSUS1 Economy stripper tool

• Strips UTP cable

• 5~6.2mm wire diameter

• Tip helps insert wire into 110-Type IDC

A. B.

110


OLS

& A

CC

ES

SO

RIE

S


COMPRESSION TOOLS

Stripping Lengths for Coax Cable

UNIVERSAL COMPRESSION TOOL• Crimps compression connectors and

modular compression connectors

• F-Type, RCA and BNC and BNC 90O right angle


• Rubber handle provides comfortable termination

PART NO. ICACSCT01U

ECONOMY COMPRESSION TOOL• Compress F-Type, RCA and BNC compression connectors

• For use with RG-59, RG-6, and RG-6 quad cable

• Vertically presses the connector to avoid over crimping


• PVC handle for a comfortable grip

PART NO. ICACSCT01E

F-TYPE COMPRESSION TOOL• Compress F-Type compression connectors

• For use with RG-59, RG-6, and RG-6 quad cable

• Ratchet mechanism prevents releasing early

• Vertically presses the connector to avoid over crimping



PART NO. ICACSCT02F

STRIPPING LENGTHS CHART

F-TYPE CONNECTORS RCA CONNECTORS BNC CONNECTORS

X 0.25" ~ 0.30" 0.17" ~ 0.18" 0.17" ~ 0.18"

Y 0.25" ~ 0.30" 0.25" ~ 0.30" 0.25" ~ 0.30"

Z 0.50" ~ 0.55" 0.50" ~ 0.55" 0.50" ~ 0.55"


111

TOOLS & ACCESSORIES COMPRESSION TOOLS

MODULAR COMPRESSION CONNECTORS HD STYLE• Front female nickel plated connector with rear compression connector



• Blue band


A. IC107FQGWH F-Type 50 / 400

B. IC107BQCWH BNC, 75 Ohm 50 / 400

C. IC107RQRWH RCA, red insert 50 / 400

IC107RQGWH RCA, green insert 50 / 400

IC107RQLWH RCA, blue insert 50 / 400

IC107RQWWH RCA, white insert 50 / 400

IC107RQYWH RCA, yellow insert 50 / 400

IC107RQKWH RCA, black insert 50 / 400

Color = White

F-TYPE CONNECTOR VALUEPACKS• Internal O-ring and compression sleeve reduces moisture

• Rust resistant steel prevents signal degradation

• Not for use on plenum cable

• Packaged in a resealable bag for easy storage

PART NO. DESCRIPTION ICRDSAV01F RG-6, black band, 20 pcs.ICRDSAV04F RG-6Q, blue band, 20 pcs.ICRDSAV59F RG-59, black band, 20 pcs.ICRDSAV01C RG-6, black band, 100 pcs.ICRDSAV04C RG-6Q, blue band, 100 pcs.ICRDSAV59C RG-59, black band, 100 pcs.

BNC CONNECTOR VALUEPACKS• Internal O-ring and compression sleeve reduces moisture



PART NO. DESCRIPTIONICRDSB61BC RG-6, black band, 20 pcs.ICRDSB51BC RG-59, white band, 20 pcs.

BNC 90O RIGHT ANGLE CONNECTOR VALUEPACK• Suitable for connecting equipment being mounted in tight corners

• Helps avoid excess bending and stress to the cable

• Internal O-ring and compression sleeve reduces moisture



PART NO. DESCRIPTION ICRDSB6RBC RG-6, 90O angle, black band, 20 pcs.

C.

A.

B.

112


OLS

& A

CC

ES

SO

RIE

S


WIRE CUTTER AND STRIPPER TOOL• Knife-like blades to cut wire easily

• For stripping 12~24 AWG stranded wire

• For stripping 10~22 AWG solid wire

• Designed with a safety lock to prevent injuries



PART NO. ICACSCTRST

WIRE CUTTER TOOL• Cuts up to 18 AWG copper or aluminum wire

• Knife-like blades to cut wire easily



PART NO. ICACSWRCTR

RACEWAY CUTTING TOOL

• Cuts plastic raceway and wall ducts

• 2.5” maximum jaw opening capacity

• Blade cuts cleanly leaving no ragged edges

• Steel frame construction with cushioned grip

• Ratchet mechanism allows safe and controlled cuts

PART NO. ICACSTPE60

CUTTING AND F-TYPE TOOLS

F-TYPE CONNECTOR TOOLS• For installing and removing F-Type connectors

• Ideal solution in hard to reach locations

• Works with RG-59, RG-6 and RG-6 quad connectors

• 3/8-32 threaded end

• Carbon steel frame with chrome plating


PART NO. DESCRIPTIONICACSF06RT 6" lengthICACSF12RT 12" length


113

TOOLS & ACCESSORIES ACCESSORIES

DUST COVER• Works with CAT 6A, CAT 6, CAT 5e and voice modular connectors

and patch panels

• Snaps on the port opening to prevent dust from entering


Color = Clear

PATCH PANEL COLOR ICONS• Apply to patch panels for system administration

• Icons are molded with text identifi cation


PART NO. DESCRIPTIONICMPPSCIxx¹ 6 voice and 6 data iconsICMPPICDxx¹ 12 data iconsICMPPICVxx¹ 12 voice icons

Color (xx¹) = WH IV BL OR RD YL GY GN PR

A. B. C. VOICE PHONE COUPLERS• For connecting line cords together

• Supports phone applications


PART NO. DESCRIPTIONA. ICMA3508DR 8P8C, Pin 1-1, female to female, keyedB. ICMA350A6C 6P6C, Pin 1-6, female to femaleC. ICMA267D66 6P6C, Pin 1-1, male to 2 females

Color = Ivory

METAL AND ADHESIVE MAGNETS• To mount boxes on fl at metal surfaces

PART NO. DESCRIPTION A. ICMAGBLOCK Metal magnet, 2 pcs.

• Works with boxes designed with magnet holders

B. IC317MTAPE Adhesive magnet, 2 pcs.

• Magnetic front with rear adhesive tape

• Works with all boxes

A. B.

ELITE™ COLOR ICONS, TEXT AND GRAPHIC• Works with Elite surface mount boxes and bezels


PART NO. DESCRIPTIONIC108ICDxx¹ 5 data, 5 IC108ICVxx¹ 5 voice, 5 IC108ICAxx¹ 5 voice, 5 data IC108ICNxx¹ Top: 2 data, 2 voice, Line 1, Line 2, Fax, Lan, Modem, Printer Bottom: CAT 5, Aux, Rx, Tx, 2 blank, 2 , 2 Color (xx¹) = WH IV BL OR RD YL BK GN PR

114

RACEWAYR

AC

EW

AY

888.ASK.4ICC | [email protected] | icc.com | RSS

RACEWAY SECTIONS

Raceway Features• Route cables in any open architectural environment

• 94V-0 vinyl, UL® listedCEILING ENTRY

Allows cable to route through the ceiling

TEE AND BASETo attach three sections together

INSIDE CORNER COVER90O bend radius

OUTSIDE CORNER COVER90O bend radius

Adhesive back to mount on walls, wood and concrete

One-piece latching system Route low-voltage cable

BULK PACKAGING

6' SECTIONS (PER FOOT)


ICRWR11Sxx¹ 3/4" W, 1' L 120'

ICRWR12Sxx¹ 1 1/4" W, 1' L 120'

ICRWR13Sxx¹ 1 3/4" W, 1' L 120'

Order by 6' incrementsExample: 1 stick = 6 ICRWR11Sxx

8' SECTIONS (PER FOOT)


ICRWR118xx¹ 3/4" W, 1' L 120'

ICRWR128xx¹ 1 1/4" W, 1' L 120'

ICRWR138xx¹ 1 3/4" W, 1' L 120'

Order by 8' incrementsExample: 1 stick = 8 ICRWR118xxColor (xx¹) = WH IV

INDIVIDUAL PACKAGING

6' SECTIONS (PER STICK)


ICRW22R6xx¹ 3/4" W, 6' L 120'

ICRW33R6xx¹ 1 1/4" W, 6' L 120'

ICRW44R6xx¹ 1 3/4" W, 6' L 120'

Order by single pieceExample: 1 stick = 1 ICRW22R6xx

8' SECTIONS (PER STICK)


ICRW22R8xx¹ 3/4" W, 8' L 120'

ICRW33R8xx¹ 1 1/4" W, 8' L 120'

ICRW44R8xx¹ 1 3/4" W, 8' L 120'

Order by single pieceExample: 1 stick = 1 ICRW22R8xxColor (xx¹) = WH IV

1.750" W

1.033" H

1.250" W

0.780" H

0.750" W

0.530" H

160'

160'

160'

160'

160'

160'

http://www.icc.com/c/24/raceway-wiring-ducts

115

RACEWAY RACEWAY SECTIONS

RACEWAY FILL CHART - 40% CAPACITY

TYPES OF CABLES

SIZE OF RACEWAY CAT 5E CAT 6 CAT 6A 25-PAIR 6 FIBER 1 FIBER COAX

3/4" W x 1/2" H 2 1 - - 1 6 1

1 1/4" W x 3/4" H 6 4 2 1 3 15 2

1 3/4" W x 1" H 11 7 4 2 6 28 5

Based on 40% fi ll capacity and ICC cabling outside diameter (O.D.)

90O FLAT ELBOW AND BASESupports left and right turns

REDUCERConnects smaller sections to larger sections

JOINT COVERJoins two sections together

Compatible products are designed with

knockouts which can be removed easily

with pliers to accommodate raceway.

Raceway Compatible Outlets

ELITETM MULTI-MEDIA BOXESPage 30

MOUNTING BOXESPage 27

JUNCTION BOXESPage 27

SURFACE MOUNT BOXES, 12-PORTSPage 28

ELITETM SURFACE MOUNT BOXES, 2, 4 AND 6-PORTSPage 28

ELITETM SURFACE MOUNT BOXES, 1-PORTPage 28

116

RACEWAYR

AC

EW

AY

888.ASK.4ICC | [email protected] | icc.com | RSS

TEES AND BASES

PART NO. DESCRIPTIONICRW11TBxx¹ 3/4", 10 setsICRW12TBxx¹ 1 1/4", 10 setsICRW13TBxx¹ 1 3/4", 10 setsICRW22TBxx¹ 3/4", 1 setICRW33TBxx¹ 1 1/4", 1 setICRW44TBxx¹ 1 3/4", 1 set

TEES

PART NO. DESCRIPTIONICRW11TOxx¹ 3/4", 10 pcs.ICRW12TOxx¹ 1 1/4", 10 pcs.ICRW13TOxx¹ 1 3/4", 10 pcs.ICRW22TExx¹ 3/4", 1 pc.ICRW33TExx¹ 1 1/4", 1 pc.ICRW44TExx¹ 1 3/4", 1 pc.

INSIDE CORNER COVERS

PART NO. DESCRIPTIONICRW11ICxx¹ 3/4", 10 pcs.ICRW12ICxx¹ 1 1/4", 10 pcs.ICRW13ICxx¹ 1 3/4", 10 pcs.ICRW22NCxx¹ 3/4", 1 pc.ICRW33NCxx¹ 1 1/4", 1 pc.ICRW44NCxx¹ 1 3/4", 1 pc.

90º FLAT ELBOWS AND BASES

PART NO. DESCRIPTIONICRW11EBxx¹ 3/4", 10 setsICRW12EBxx¹ 1 1/4", 10 setsICRW13EBxx¹ 1 3/4", 10 setsICRW22EBxx¹ 3/4", 1 setICRW33EBxx¹ 1 1/4", 1 setICRW44EBxx¹ 1 3/4", 1 set

90º FLAT ELBOWS

PART NO. DESCRIPTIONICRW11EOxx¹ 3/4", 10 pcs.ICRW12EOxx¹ 11/4", 10 pcs.ICRW13EOxx¹ 13/4", 10 pcs.ICRW22FExx¹ 3/4", 1 pc.ICRW33FExx¹ 11/4", 1 pc.ICRW44FExx¹ 13/4", 1 pc.

OUTSIDE CORNER COVERS AND BASES

PART NO. DESCRIPTIONICRW11OBxx¹ 3/4", 10 setsICRW12OBxx¹ 1 1/4", 10 setsICRW13OBxx¹ 1 3/4", 10 setsICRW22UCxx¹ 3/4", 1 setICRW33UCxx¹ 1 1/4", 1 setICRW44UCxx¹ 1 3/4", 1 set

OUTSIDE CORNER COVERS

PART NO. DESCRIPTIONICRW11OCxx¹ 3/4", 10 pcs.ICRW12OCxx¹ 1 1/4", 10 pcs.ICRW13OCxx¹ 1 3/4", 10 pcs.ICRW22CCxx¹ 3/4", 1 pc.ICRW33CCxx¹ 1 1/4", 1 pc.ICRW44CCxx¹ 1 3/4", 1 pc.

CEILING ENTRIES WITH MOUNTING CLIP

PART NO. DESCRIPTIONICRW11CExx¹ 3/4", 10 setsICRW12CExx¹ 1 1/4", 10 setsICRW13CExx¹ 1 3/4", 10 setsICRW22CMxx¹ 3/4", 1 setICRW33CMxx¹ 1 1/4", 1 setICRW44CMxx¹ 1 3/4", 1 set

REDUCERS

PART NO. DESCRIPTIONICRW11ROxx¹ 3/4" to 3/4, 10 pcs.ICRW12ROxx¹ 1 1/4" to 3/4, 10 pcs.ICRW13ROxx¹ 1 3/4" to 1 1/4", 10 pcs.ICRW22RExx¹ 3/4" to 3/4, 1 pc.ICRW33RExx¹ 1 1/4" to 3/4, 1 pc.ICRW44RExx¹ 1 3/4" to 1 1/4", 1 pc.

JOINT COVERS

PART NO. DESCRIPTIONICRW11JCxx¹ 3/4", 10 pcs.ICRW12JCxx¹ 1 1/4", 10 pcs.ICRW13JCxx¹ 1 3/4", 10 pcs.ICRW22JCxx¹ 3/4", 1 pc.ICRW33JCxx¹ 1 1/4", 1 pc.ICRW44JCxx¹ 1 3/4", 1 pc.


RACEWAY CONNECTING ACCESSORIES

Features• Ivory and white colors

• Single and 10 packs

• Retail ready packaging

• Thick bags for protection

• Perforated edge to open easily

• Barcoded to process easily

END CAPS

PART NO. DESCRIPTIONICRW11ECxx¹ 3/4", 10 pcs.ICRW12ECxx¹ 1 1/4", 10 pcs.ICRW13ECxx¹ 1 3/4", 10 pcs.ICRW22ECxx¹ 3/4", 1 pc.ICRW33ECxx¹ 1 1/4", 1 pc.ICRW44ECxx¹ 1 3/4", 1 pc.


1 1/4" to 3/4"1 3/4" to 3/4"

1 1/4" to 3/4"1 3/4" to 3/4"

http://www.icc.com/c/24/raceway-wiring-ducts

117

RACEWAY WIRING DUCTS

Color (xx¹) = WH GY BK

2"W X 2"H SLOTTEDICRWL226xx¹

2"W X 2"H SOLIDICRWS226xx¹

2"W X 4"H SLOTTEDICRWL246xx¹

2"W X 4"H SOLIDICRWS246xx¹PART NO.

Wiring Duct Features• Easy to cut, trim, and paint to fi t virtually any color décor and application layout

• Pre-drilled mounting holes for easy mounting

WIRING DUCT FILL CHART - 40% CAPACITY

TYPES OF CABLES

WIRING DUCT SIZE CAT 5e CAT 6 CAT 6A 25-PAIR 6 FIBER 1 FIBER COAX

2" W x 2" H 25 16 9 6 14 63 12

2" W x 4" H 51 32 19 11 29 127 24

Based on 40% fi ll capacity and ICC cabling outside diameter (O.D.)

Wiring DuctsSlotted and solid design

Integrated with snap-on coverAvailable in white, gray and black

• • •

6' SECTIONS, ORDER BY 6' INCREMENTS, 120' PER CARTON

118

PRE-TERMINATED CABLESP

RE

-TE

RM

INA

TED

CA

BLE

S

888.ASK.4ICC | [email protected] | icc.com | HPS

HIPERLINKTM COPPER PLUG & PLAY SOLUTION

CAT 6e and CAT 6A cable

CMP or CMR jackets

Up to 295 feet in length per TIA standard

Tested to exceed TIA performance standards

Average two week lead time

•

•

•

•

•

Copper

COPPER CASSETTE TO CASSETTE MODEL CX

• For installation between racks

• Modular jacks for easy changes

• Modular cassette for tool less installation

• 24 copper ports in 1 RMS

COPPER CASSETTE TO PATCH CORDS MODEL CP

• For installation between cross-connects

• 8P8C RJ-45 modular plugs

50 micro-inch gold plated contacts

http://www.icc.com/c/28/pre-terminated-assemblies

119

PRE-TERMINATED CABLES HIPERLINKTM FIBER PLUG & PLAY SOLUTION

LC connectors

OM4, OM3, 50/125µm, 62.5/125µm

or singlemode fi ber cable

OFNR and OFNP jackets

Tested with 0.2dB or less Insertion Loss

Average two to four week lead time

•

•

•

•

•

•

Fiber Optic

FIBER CASSETTE TO CASSETTE MODEL FCC

• For installation between racks

• Modular couplers for easy changes

• Modular cassette for tool less installation

• 48 fi ber ports in 1 RMS

FIBER CASSETTE TO FIBER JUMPERS MODEL FCN

• For installation between cross-connects

• LC or SC duplex fi ber jumpers

120

INDEXIN

DE

X

888.ASK.4ICC | [email protected] | icc.com | Index

IC066BRCLP ........44IC066CV050 ........44IC066DFT50 ..........45IC066LS050 ..........44IC066NB050 .........44IC066NBC50 ........44IC066SFT25 ...........45IC106FP2xx ..........21IC106FP4xx ..........21IC107AF2xx ..........19IC107AF4xx ..........19IC107AF8xx ..........19IC107AS2xx ..........20IC107AS4xx ..........20IC107AS8xx ..........20IC107B3Gxx .........14IC107B5Fxx ..........14IC107B5Gxx .........14IC107B6Gxx .........15IC107B7Gxx .........15IC107B8Gxx .........15IC107B9Fxx ..........14IC107B9Gxx .........14IC107BC1xx .........28IC107BC2xx .........28IC107BE241 ..........37IC107BFCWH .......14IC107BFGxx .........15IC107BGCWH ......14IC107BN0xx ..........17IC107BN2xx ..........17IC107BNCxx ........14IC107BP8VB .........38IC107BP12V .........38IC107BP241 ..........37IC107BP481 ..........37IC107BP482 ..........37IC107BQCWH ......14, 111IC107BSSBK ..........16IC107C5Cxx ........6IC107C5Exx .........6IC107C6ASH ........4IC107C6Cxx ........5IC107C6Rxx .........7IC107C6Sxx ..........7IC107CP6xx .........5IC107DA1xx .........19IC107DA2xx .........19IC107DA4xx .........19IC107DDHxx ........13IC107DF4SS ..........19IC107DF8SS ..........19IC107DFDSS .........21IC107DFDxx .........21IC107DFQxx .........21IC107DFSSS ..........21IC107DFSxx ..........21IC107DFTxx ..........21IC107DH2xx .........13IC107DI1xx ...........21IC107DI2xx ...........21IC107DI3xx ...........21IC107DI4xx ...........21IC107DI6xx ...........21IC107DPIxx ...........21IC107DR2xx .........13IC107DR4xx .........13IC107DSBxx ..........16IC107DSCxx .........16IC107E5Cxx .........6IC107EF1WH ........23IC107EF2WH ........23IC107F1Cxx ..........18IC107F01xx ...........18IC107F2Cxx ..........18IC107F02xx ...........18IC107F3Cxx ..........18IC107F03xx ...........18IC107F4Cxx ..........18IC107F04xx ...........18IC107F5Cxx ..........6IC107F6Cxx ..........5

IC107F06xx ..........18IC107F12xx ..........18IC107FD8xx .........18IC107FFWSS .........22IC107FFWxx .........22IC107FQGWH ......14, 111IC107FRWSS .........22IC107FRWxx .........22IC107FT0xx ...........18IC107FT9xx ...........18IC107FWPxx .........22IC107G6Gxx ........15IC107G8Gxx ........15IC107GFGxx ........15IC107HDMxx ........12IC107K6Gxx .........15IC107K8Gxx .........15IC107KFGxx .........15IC107L6Cxx ..........5IC107L6Gxx .........15IC107L8Gxx .........15IC107LC2xx .........8, 91IC107LF1xx ...........19IC107LF2xx ...........19IC107LF3xx ...........19IC107LF4xx ...........19IC107LF6xx ...........19IC107LFGxx ..........15IC107MB6BK ........29IC107MRDxx ........27IC107MRSxx .........27IC107PMGxx ........16IC107PPS6A .........37IC107PPU6A ........37IC107R6Gxx .........15IC107R8Gxx .........15IC107RD5xx .........15IC107RF5xx ..........15IC107RFGxx .........15IC107RQGWH .....15, 111IC107RQKWH ......15, 111IC107RQLWH .......15, 111IC107RQRWH ......15, 111IC107RQWWH .....15, 111IC107RQYWH ......15, 111IC107RR5xx ..........15IC107S01SS ..........20IC107S01xx...........20IC107S02SS ..........20IC107S02xx...........20IC107S03SS ..........20IC107S03xx ..........20IC107S04SS ..........20IC107S04xx ..........20IC107S06SS ..........20IC107S06xx ..........20IC107SACWH .......12IC107SAPxx .........12IC107SB1xx ..........28IC107SB2xx ..........28IC107SB4xx ..........28IC107SB6xx ..........28IC107SBTxx ...........28IC107SC2xx ..........8, 91IC107SD8xx ..........20IC107SF1SS ...........19IC107SF2SS ...........19IC107SF3SS ...........19IC107SF4SS ...........19IC107SF6SS ...........19IC107ST2xx ...........8, 91IC107ST9xx ...........20IC107SVIxx ...........12IC107UAAWH.......12IC107UABWH .......12IC107Y6Gxx .........15IC107Y8Gxx .........15IC107YFGxx .........15IC108BA1xx ..........30, 92IC108BA2xx .........30, 92IC108BACxx .........9IC108BACxx ........92

IC108BF1xx ..........30, 92IC108BF2xx...........30, 92IC108BFBxx ..........30, 92IC108BFCxx ..........9IC108BFCxx ..........92IC108BFDxx ..........9IC108BFDxx ..........92IC108BFRxx ..........9IC108BFTxx ...........9IC108BFTxx ...........92IC108CE1xx .........23IC108F01xx ..........30IC108F02xx ..........30IC108FD4xx ..........30IC108ICAxx ..........113IC108ICDxx ..........113IC108ICNxx ..........113IC108ICVxx ..........113IC108MMBxx .......30, 92IC108SB1xx ..........28IC108SB2xx ..........28IC108SB4xx ..........28IC108SB6xx ..........28IC108WBDxx ........31, 93IC108WBSxx .........31, 93IC110CB4PC ........43IC110CB4PR ........43IC110CB5PC ........43IC110CB5PR ........43IC110CMBNF .......40IC110CMBWF ......40IC110H1004 .........41IC110LHLDR .........41IC110NF100 .........40IC110NF300 .........40IC110PRK61 .........42IC110RM100 ........42IC110RM200 ........42IC110RMCMB ......42IC110TC350 .........43IC110TC450 .........43IC110W1004 ........40IC110W3004 ........40IC110WF100 .........40IC110WF300 .........40IC110WH100 ........41IC110WHCMS ......41IC110WK966 ........40IC250MBSxx .........27IC317MTAPE ........29, 113IC625S51xx ..........11IC625S52xx ..........11IC625SB6xx ..........24IC625SB8xx ..........24IC625SV1xx ..........11IC625SV2xx ..........11IC630DA6SS .........25IC630DB6xx ..........25IC630DD6xx .........25IC630DDFxx .........17IC630DI6xx ...........25IC630DIBxx ...........21IC630DSFxx ..........17IC630DVFxx .........25IC630E6Gxx .........24IC630E60xx ..........24IC630E66xx ..........24IC630EB0xx ..........22IC630EBDxx ..........22IC630EBSSS ..........22IC630EG0xx .........24IC630EGGxx ........24IC630SS6xx ...........25IC635DS4xx ..........24IC635DS8xx ..........24IC640BDSWH .......23IC640BSSWH ........23IC1000S4SV ..........77IC1000S6SV ..........77IC1074PIxx ...........21IC1076F0xx ..........7IC1076FCxx .........7

IC1076V0xx .........7IC1076VCxx .........7IC1078E5xx ..........6IC1078F5xx ..........6IC1078F6xx ..........5IC1078GAxx ........4IC1078L6xx ..........5IC1078S6A0 .........4IC06626P4C .........45IC06628P8C .........45IC06686P6C .........45ICACS04PH5 ........108ICACS05PRH ........108ICACS8WUEH ......106ICACS066RB ........107ICACS110RB ........107ICACSBAGJE .......106ICACSBWSBK .......69ICACSCSCTV .......109ICACSCT01E ........110ICACSCT01U ........110ICACSCT02F ........110ICACSCT845 ........109ICACSCT864 ........109ICACSCTRST .........112ICACSDCICL .......17, 34, 113ICACSDCVCL .....17, 34, 113ICACSE15NL ........79ICACSF06RT .........112ICACSF12RT .........112ICACSGK6AS .......4, 32ICACSGKS00 ........69ICACSHTA01 ........107ICACSL1KBK .........79ICACSL1KNL ........79ICACSL7KBK ........79ICACSL7KNL ........79ICACSL11BK ........79ICACSL11NL ........79ICACSL15BK .........79ICACSL15NL ........79ICACSL75BK .........79ICACSL75NL ........79ICACSM06BK .......79ICACSM06NL .......79ICACSM8KBK .......79ICACSM8KNL .......79ICACSM12BK .......79ICACSM12NL .......79ICACSM85BK .......79ICACSM85NL .......79ICACSMBDxx .......27ICACSMBSxx ........27ICACSPDT00 ........107ICACSPDT4P ........108ICACSPDT05 ........108ICACSPDTEH ........106ICACSS01BK ........69ICACSS02BK ........69ICACSS04BK ........79ICACSS04NL ........79ICACSS08BK ........79ICACSS8KBK ........79ICACSS8KNL ........79ICACSS08NL ........79ICACSS55BK .........79ICACSS55NL ........79ICACSTPE60 .........112ICACSTSUCD .......109ICACSTSUS1 .........109ICACSV08xx ........78ICACSV12xx ........78ICACSV75BK ........78ICACSV75BL ........78ICACSVB8BK ........78ICACSVBTBK ........78ICACSWDS10 .......43ICACSWDS20 .......43ICACSWRCTR ......112ICCMSABR62 .......55ICCMSABR64 .......55ICCMSABR66 .......55

ICCMSABR68 .......55ICCMSABRS2 .......55ICCMSABRS4 .......55ICCMSABRS6 .......55ICCMSABRS8 .......55ICCMSABRSC ......55ICCMSCBARC .....69ICCMSCBARM ....69ICCMSCBBRC......69ICCMSCBBRM .....69ICCMSCC6BK .....60ICCMSCCVBK .....60ICCMSCMA21 .....61ICCMSCMA22 .....61ICCMSCMA23 .....61ICCMSCMA31 .....62ICCMSCMA32 .....62ICCMSCMA41 .....62ICCMSCMA42 .....62ICCMSCMA51 .....62ICCMSCMA52 .....62ICCMSCMA61 .....62ICCMSCMA62 .....62ICCMSCMA81 .....61ICCMSCMA82 ....61ICCMSCMA83 ....61ICCMSCMA84 .....61ICCMSCMP31 .....63ICCMSCMP32 .....63ICCMSCMP51 .....63ICCMSCMP52 .....63ICCMSCMPB1 .....63ICCMSCMPB2 .....63ICCMSCMPB3 .....63ICCMSCMPB4 .....63ICCMSCMPC1 ....63ICCMSCMPC2 ....63ICCMSCMPC3 ....63ICCMSCMPC4 ....63ICCMSCMPK1 .....63ICCMSCMPK2 .....63ICCMSCMPL1 ......65ICCMSCMPLC .....65ICCMSCMPR1 .....65ICCMSCMPR2 .....65ICCMSCMPR3 .....65ICCMSCMPR4 .....65ICCMSCMPR5 .....64ICCMSCMPR6 .....64ICCMSCMPR7 .....64ICCMSCMPR8 .....64ICCMSCMPR9 .....64ICCMSCMPT1 ......65ICCMSCMPT2 ......65ICCMSCMRH7 .....60ICCMSFCMRP .....63ICCMSHB1RC ......55ICCMSHB1RS .......55ICCMSHB2RC ......55ICCMSHB2RS .......55ICCMSHB4RC ......55ICCMSHB4RS .......55ICCMSHBCVR .....55ICCMSHDS20 ......66ICCMSJH922 .......68ICCMSJH933 .......68ICCMSJH944 .......68ICCMSJH955 .......68ICCMSJHK22 .......68ICCMSJHK33 .......68ICCMSJHK44 .......68ICCMSJHK55 .......68ICCMSL4PBK ........71ICCMSLAWSK ......70ICCMSLCMRK......71ICCMSLCRDK ......71ICCMSLCRPK .......71ICCMSLEBSK ........70ICCMSLESSK ........71ICCMSLFT90 .........70ICCMSLIR90 .........70ICCMSLJB01 ........70

PART NUMBER INDEX

121

INDEX PART NUMBER INDEX

ICCMSLMFFK .......71 ICCMSLOR90 .......70ICCMSLPECK .......70ICCMSLRRBK .......70ICCMSLRW05 ......70ICCMSLST05 .........70ICCMSLST10 .........70ICCMSLTJSK .........70ICCMSLTWSK .......71ICCMSLVWBK ......71ICCMSR4P84 .......59ICCMSR1948 ........59ICCMSR1972 ........59ICCMSR1984 ........59ICCMSRAS30 .......67ICCMSRCMRP .....63ICCMSRDS20 .......66ICCMSRDS30 .......66ICCMSRDV20.......66ICCMSRDV30.......66ICCMSRFLKT ........59, 60, 69ICCMSRFV32 .......67ICCMSRKLST ........67ICCMSRKSMT .......67ICCMSRMU02 ......65ICCMSRMU1C .....65ICCMSRSF10 ........66ICCMSRSF15 ........66ICCMSRSFC1 .......66ICCMSRSFC2 .......66ICCMSRSV10 .......66ICCMSRSV15 .......66ICCMSSFR12 ........57ICCMSSFR25 ........57ICCMSSGR21 .......57ICCMSSGR22 .......57ICCMSVHB06 .......58ICCMSVHB08 .......58ICCMSVHB18 .......58ICCMSWMR08 .....57ICCMSWMR15 .....57ICCMSWMR30 .....57ICCMSWMUR5 ....58ICFC12ML1G .......83ICFC12ML50 ........83ICFC12MLD6 .......83ICFC12MS1G .......83ICFC12MS50 ........83ICFC12MSD6 .......83ICFC12SLD9 .........83ICFC12SSD9 .........83ICFC24ML1G .......83ICFC24ML50 ........83ICFC24MLD6 .......83ICFC24SLD9 .........83ICFOA5MM02 ......91ICFOA7MM01 ......91ICFOA7SM01 .......91ICFOA8MM01 ......91ICFOA8MM02 ......91ICFOA8SM01 .......91ICFOA8SM02 .......91ICFOA9MM02 ......91ICFOA9SM02 .......91ICFOBWCBxx .......9ICFOBWCBxx .......92ICFOBWLBxx ........9ICFOBWLBxx ........92ICFOBWTBxx ........9ICFOBWTBxx ........92ICFOD102BK ........89ICFOD104BK ........89ICFOD202BK ........89ICFOD204BK ........89ICFODE41WM......89ICFOJ1G6zz .........94ICFOJ1G7zz .........94ICFOJ1M2zz .........95ICFOJ1M3zz .........95ICFOJ1M4zz .........95ICFOJ1M5zz .........95ICFOJ1M6zz .........95

ICFOJ1M7zz .........95ICFOJ2G6zz .........94ICFOJ2G7zz .........94ICFOJ2M2zz .........95ICFOJ2M3zz .........95ICFOJ2M4zz .........95ICFOJ2M5zz .........95ICFOJ2M6zz .........95ICFOJ2M7zz .........95ICFOJ3M3zz .........95ICFOJ3M5zz .........95ICFOJ3M7zz .........95ICFOJ7C2zz .........95ICFOJ7C3zz .........95ICFOJ7C4zz .........95ICFOJ7C5zz .........95ICFOJ7C6zz .........95ICFOJ7C7zz .........95ICFOJ8C2zz .........95ICFOJ8C3zz .........95ICFOJ8C4zz .........95ICFOJ8C5zz .........95ICFOJ8C6zz .........95ICFOJ8C7zz .........95ICFOJ8G6zz .........94ICFOJ8G7zz .........94ICFOJ9C2zz .........95ICFOJ9C3zz .........95ICFOJ9C4zz .........95ICFOJ9C5zz .........95ICFOJ9C6zz .........95ICFOJ9C7zz .........95ICFOJA55zz..........94ICFOJATGzz .........94ICFOJATSzz ..........94ICFOPB00BK ........84ICFOPC16BK ........84ICFOPC26BK ........84ICFOPJ04BK .........84ICFOPL16BK .........84ICFOPL161G ........84ICFOPM24BK .......84ICFOPM26BK .......84ICFOPM261G ......84ICFOPR16BK ........84ICFOPR26BK ........84ICFOPS16BK .........84ICFOPS26BK .........84ICFOPT16BK .........84ICFOPT18BK .........84ICFOPT26BK .........84ICFOPT28BK .........84ICFOR102BK.........87ICFOR103BK.........87ICFOR204BK.........87ICFOR306BK.........87ICFOR412BK.........87ICFOR444BK.........88ICFORE31RM .......86ICFORE62RM .......86ICFORET4RM ........86ICFORPP1RM .......83ICFORPP1RM .......85ICFORPP2RM .......83ICFORPP2RM .......85ICFORS3096 .........88ICFORS4192 .........88ICFORSC024 ........88ICFORST024 .........88ICFOSKFM12 ........86, 89, 90ICFOSTFM12.........90ICFOSTFM24.........90ICFOSTUF24 .........90ICFP24MP1G .......85ICFP24MPBK ........85ICFP96ML1G ........85ICLC4ZZFSV ..........77ICLC6ZZFSV ..........77ICMA267D66 .......113ICMA350A6C ......113ICMA3508DR .......113ICMAGBLOCK .....29, 113

ICMB89B0WH ......44ICMB89BCWH .....44ICMB89D0WH ......44ICMB89U0WH ......44ICMP4P4CHS .......77ICMP6P4CFT ........76ICMP6P6CFT ........76ICMP6P6CRD ......76ICMP6P6SRD........76ICMP8P8C5E .......76ICMP8P8C6E .......76ICMP8P8C6S .......76ICMP8P8CFT ........76ICMP8P8CRD ......76ICMP8P8SRD........76ICMP1101PR ........43ICMP1102PR ........43ICMP1103PR ........43ICMP1104PR ........43ICMPP12F5E.........34ICMPP12F6E.........34ICMPP012U6 ........35ICMPP12V5E ........34ICMPP12V60 ........34ICMPP24CP5 .......36ICMPP24CP6 .......36ICMPP024T2 .........39ICMPP24T2C ........39ICMPP024T4 .........39ICMPP24T4C ........39ICMPP24TF2 ........39ICMPP24TF4 ........39ICMPP024U6 ........35ICMPP25CMB ......35ICMPP48C51 .......36ICMPP48C61 .......36ICMPP48CP5 .......36ICMPP48CP6 .......36ICMPP048T2 .........39ICMPP48T2C ........39ICMPP048T4 .........39ICMPP48T4C ........39ICMPP48TF2 ........39ICMPP48TF4 ........39ICMPP048U6 ........35ICMPP0245E ........34ICMPP246AU .......32ICMPP0485E ........34ICMPP486AS ........32ICMPP02460 ........34ICMPP04860 ........34ICMPPICDxx ........35, 113ICMPPICVxx ........35, 113ICMPPMB506 .......29ICMPPMB606 .......29ICMPPSCIxx .........35, 113ICMPPTF242 ........39ICMPPTF482 ........39ICMPPTF244 ........39ICMPPTF484 ........39ICPCSBZZBL .........74ICPCSEZZBL .........74ICPCSC01BL ........73ICPCSC03BL ........73ICPCSC05BL ........73ICPCSC07BL ........73ICPCSC10BL ........73ICPCSD01BL ........73ICPCSD03BL ........73ICPCSD05BL ........73ICPCSD07BL ........73ICPCSD10BL ........73ICPCSGzzxx .........72ICPCSJzzxx ...........73ICPCSKzzxx ..........72ICPCSQzzBL .........74ICPCSRzzBL ..........74ICPCSTFBzz...........75ICPCSTFFzz ...........75ICPCSTFMzz .........75ICPCSTMBzz .........75ICPCSTMMzz ........75

ICRDS0F5xx ..........10ICRDS2F5xx ..........10ICRDS3RFxx ..........17ICRDSAV01C .......111ICRDSAV01F.........111ICRDSAV04C .......111ICRDSAV04F.........111ICRDSAV59C .......111ICRDSAV59F.........111ICRDSB6RBC ........111ICRDSB51BC ........111ICRDSB61BC ........111ICRDSDBPxx .........17ICRDSDC2LK ........105ICRDSMMBK1 ......99ICRDSMMBK8 ......99ICRDSQBPxx ........17ICRDSSBPxx ..........17ICRDSV05xx .........10ICRDSV25xx .........10ICRDSVF0xx .........10ICRDSVF5xx .........10ICRESAV42L .........104ICRESAV62L .........104ICRESAV82L .........104ICRESBMP04 ........105ICRESBMP06 ........105ICRESCMC06 .......105ICRESDC9PD .......98ICRESDC9PK ........98ICRESDC14E ........96ICRESDC14H ........96ICRESDC14K ........96ICRESDC14P ........96ICRESDC21E ........97ICRESDC21H ........97ICRESDC21K ........97ICRESDC21P ........97ICRESDC28E ........97ICRESDC28H ........97ICRESDC28K ........97ICRESDC28P ........97ICRESDC42E ........100ICRESDCAC2 .......105ICRESDCAC3 .......105ICRESDCBUM.......105ICRESDPA1C ........103ICRESDPA2C ........103ICRESDPA3C ........103ICRESDPB1C ........103ICRESDPB2C ........103ICRESDPB3C ........103ICRESDR14H.........96ICRESDR21H.........97ICRESDR28H.........97ICRESPSB07 ..........105ICRESVPA1C ........102ICRESVPA2C ........102ICRESVPA3C ........102ICRESVPB1C ........102ICRESVPB2C ........102ICRESVPB3C ........102ICRESVS42G ........105ICRW11CExx ........116ICRW11EBxx .........116ICRW11ECxx ........116ICRW11EOxx ........116ICRW11ICxx .........116ICRW11JCxx ........116ICRW11OBxx .......116ICRW11OCxx .......116ICRW11ROxx .......116ICRW11TBxx .........116ICRW11TOxx ........116ICRW12CExx ........116ICRW12EBxx .........116ICRW12ECxx ........116ICRW12EOxx ........116ICRW12ICxx .........116ICRW12JCxx ........116ICRW12OBxx .......116ICRW12OCxx .......116

ICRW12ROxx .......116ICRW12TBxx .........116ICRW12TOxx ........116ICRW13CExx ........116ICRW13EBxx .........116ICRW13ECxx ........116ICRW13EOxx ........116ICRW13ICxx .........116ICRW13JCxx ........116ICRW13OBxx .......116ICRW13OCxx .......116ICRW13ROxx .......116ICRW13TBxx .........116ICRW13TOxx ........116ICRW22CCxx .......116ICRW22CMxx ......116ICRW22EBxx .........116ICRW22ECxx ........116ICRW22FExx .........116ICRW22JCxx ........116ICRW44R8xx ........114ICRW44RExx.........116ICRW44TBxx .........116ICRW44TExx .........116ICRW44UCxx .......116ICRWL226xx .........117ICRWL246xx .........117ICRWR11Sxx .........114ICRWR12Sxx .........114ICRWR13Sxx .........114ICRWR118xx ........114ICRWR128xx ........114ICRWR138xx ........114ICRWS226xx .........117ICRWS246xx .........117

122

WIRING DIAGRAMSW

IRIN

G D

IAG

RA

MS

888.ASK.4ICC | [email protected] | icc.com | Wiring Diagrams

T568 WIRING

ICC products are UL or ETL listed and RoHS compliant where applicable.

123

CORPORATE PROGRAM ELITE INSTALLER PROGRAM

Elite Installer™

Register online for free at icc.com/Elite and start using your benefi ts.1

• 15-Year warranty • Priority tech support• Project discounts • Elite certifi cate• Project rebates • Priority shipping• Sales promotions • Earn reward points• Product notices • CAD drawing usage

+

Certifi ed Elite Installer™

Send us the installer agreement with payment. Your company will be certifi ed for 5 years and be eligible for more benefi ts.1

• Includes 1 training2 • Free product samples• Lifetime Warranty • Project kitting/staging• Site verifi cations • Business referrals• Certifi ed certifi cate • Written success stories• Earn free trainings • Project assistance• Free tools • Media library usage

2 Master TechnicianSend your technician to our 1 day training course to earn a license valid for 5 years.

• Taught by a certifi ed instructor• Covers industry standards and codes• Guidelines for installing a cabling system• How to test and register a site for warranty• Hands-on termination practices

Earn BICSI education credits!

Lifetime Cabling System Performance Warranty™1

Lifetime Warranty

• Master Technician required• Covers parts and labor• Site must be verifi ed• Receive a Proof of Warranty

15-Year Warranty

• No certifi cation needed• Covers parts• Site must be registered• Receive a Proof of Warranty

15-Year Cabling System Performance Warranty™

1 Go online to icc.com for complete details and terms and conditions.

1515YEARYEAR

TM

12YEAR

3YEARWARRANTY

LIFE15YEAR

12YEAR

3YEARWARRANTYWARRANTY

LIFELIFETM

Join Elite, earn rewards and perks!The Elite Installer Program is a reseller program that forms a partnership between installers and ICC.

© Copyright 2012, ICC. ICC and the ICC logo are a registered trade name and trademark. All rights reserved. The materials contained here are protected by copyright, trademark and other intellectual property laws and may not be copied, modified or used in any unauthorized manner without the express, written permission from ICC. The information in this document is deemed to be reliable and accurate, but is subject to change without notice. ICC disclaims any responsibility for any errors or inaccuracies here in. All other trade names and trademarks are the property of their respective owners.

MMILIT0448

ICC14700 Alondra Blvd.

La Mirada, CA 90638 USA +1.562.356.3111 Phone

+1.562.356.3100 Fax888.ASK.4ICC (275.4422)

[email protected]

icc.com/catalog

Icc catalog

Documents

Transcript of Icc catalog