ICAR-Central Institute of Post-Harvest Engineering and ... · Machinery and Equipment Testing...
Transcript of ICAR-Central Institute of Post-Harvest Engineering and ... · Machinery and Equipment Testing...
ICAR-Central Institute of Post-Harvest Engineering and Technology
P.O. PAU, Ludhiana-141004 (Punjab)
F.N: PHMETC/CIPHET/CSR /2018 Date: 06/09/2019
Walk-in-interview
Application are invited for engagement of one Senior Research Fellow (SRF) in Post-Harvest
Machinery and Equipment Testing Center (PHMETC) of ICAR- Central Institute of Post-Harvest
Engineering and Technology (ICAR-CIPHET), Ludhiana, Punjab. The appointment will be purely
temporary under contractual and co-terminus basis, following the prescribed process, for six
months or till the completion date of the project. Appointment may be terminated at any time
without notice or assigning any reason thereof. The candidate possessing required qualification
given below may appear before selection committee at the Conference Hall-2, ICAR- Central
Institute of Post-Harvest Engineering and Technology (ICAR-CIPHET), PO: PAU, Ludhiana,
Punjab.
Name of the project: “Post-harvest machinery and equipment testing centre” at
ICAR-CIPHET, Ludhiana under Sub Mission on Agricultural
Mechanization (SMAM)
Date and time of interview 23rd September, 2019; 10:30 AM
Place of interview Conference Hall-2, ICAR- Central Institute of Post-harvest
Engineering and Technology (CIPHET), PO:PAU, Ludhiana-
141 004 (Punjab)
Date of completion of project: Till further Order
Name of the post Senior Research Fellow (SRF)
Number of posts 01 (one)
Qualification Essential:
Master’s degree in Agricultural Process Engineering/ Food
Process Engineering/Process and food Engineering/Post
harvest Technology & Engineering/ Mechanical Engineering/
Food Technology/Food Science & Technology
Desirable:
Good knowledge of SolidWorks or AutoCAD Software
Knowledge of language: English and Hindi
Remuneration Rs, 25000 plus HRA or As per rules
Age limit 35 years (with relaxation in case of SC/ST/OBC and woman as
per existing rules)
Terms and Conditions:
i) The above position is purely on temporary basis and co-terminus with the project.
ii) There is no provision for absorption/ re-employment in ICAR/ CIPHET/ after completion of
time bound project.
iii) Place of work will be ICAR-CIPHET, Ludhiana, however, the candidate may be placed
anywhere in India depending upon requirement of the project.
iv) No TA/ DA will be paid for attending the interview.
v) The applicants must bring with them original documents and a brief of research work carried
out during post-graduation / PhD along with one set of photocopy at the time of interview.
vi) No objection certificate from the employer in case he/she is employed elsewhere.
vii) Experience certificate in original (if any).
viii) No separate interview call letter will be issued to the candidates.
ix) All eligible candidates are requested to be present 30 minutes before scheduled time on the
date of Interview for necessary formalities.
x) Canvassing in any form will render the candidate disqualified for the post.
xi) The Director, ICAR-CIPHET, Ludhiana’s decision will be final and binding in all respects.
Note: The applications with detailed bio-data in the following proforma (1) Name of the candidate
(2) Father’s Name (3) Date of birth (4) Present address (5) Permanent address (6) Qualifications
(starting from 10th board) (7) Experience, if any (9) Publications etc. may be sent through
registered post or email ([email protected]) with a passport size photograph, to Dr. Pankaj
Kumar, Officer In-Charge Post-Harvest Machinery and Equipment (PHME) Testing Centre,
ICAR- Central Institute of Post-Harvest Engineering and Technology (ICAR-CIPHET), PO: PAU,
Ludhiana, (Punjab), and attend the walk-in-interview as per above schedule. Superscribe the
envelope with “Application for the post of ___________________ under _________________
(Project Name)”.
Dr. Pankaj Kumar
Officer In-charge, PHME Testing Centre,
ICAR-CIPHET, Ludhiana
Application Format for SRF Position
1. Name:
2. Father’s name:
3. Date of Birth:
4. Address for correspondence:
5. E-mail:
6. Contact telephone/mobile no:
7. Category: SC/ST/OBC/General
8. Educational qualifications:
S.No Degree
/Certificate
Board /University Year Marks/Grade
points obtained
Ph. D
M.Tech
B.Tech
XII
X
9. Research Experience (number of years):
S.No. Name of
Position
From To Pl/Incharge Name of
project
Organization
10. Publications:
11. Any other relevant information:
Declaration: I, hereby declare that the information furnished here are true.
Date: Signature
Passport Size
Photo