IC-01: IVI Content check Module (ICM) - EReg › media › 2295 › ivi-content-module-i… · ivi...

Functional Design

IC-01: IVI Content check Module (ICM)

Version Nr.: 1.5.1

Version Date: 0126-1002-202019

Revision history

Version

Nr.

Version

Date

Author(s) Description

1.5.1 26-02-2020 P. Oude Weernink

(The Netherlands,

RDW)

Rule 301 added for FinalDriveVehNumber

1.5 01-10-2019 P. Oude Weernink

(The Netherlands,

RDW)

Possible to receive version 1.4. and 1.5. new fields added.

Checks for replaced fields ClassOfHybridVehicleCode

HybridVehIndicator , checks for new WLTP fields.

1.4b 01-07-2017 P. Oude Weernink

(The Netherlands,

RDW)

Maketable must be present for Incomplete and Completed vehicles

also.

1.4a 01-04-2017 P. Oude Weernink

(The Netherlands,

RDW)

Possibility to receive 1.3 version of XSD and change the checks

accordingly.

The field OffVehicleChargingInd has been moved to vehicle level

as of version 1.2 (OffVehicleChargingVehInd).

Functional Design Version Nr: 1.5.1

Version Date: 0126-1002-20192020

ivi content module (icm) - functional description v1.5.doc pag. 2 van 60


(The Netherlands,

RDW)

Added missing fields to complete the overview per XSD version.


(The Netherlands,

RDW)

Checks for vehicle categories M1,M2,M3,N1,N2,N3 also applied

to the Gelände vehicles.

Bug resolved related to Rulenumber R029 and FuelCode 90. Re-

moved R026 due to overlap with R027.

1.2 21-07-2016 M.A. Juurlink (The

Netherlands, RDW)

Removed SmokeCorrectedAbsorptionCoeff check, changed checks

for AxleTable, MakeTable, MaximumNetPower, MaximumSpeed

and UnladenMassOfTheVehicle.

Make it possible to receive a 1.2 version of the XSD.

No further functional changes based on the 1.2 message yet. These

changes will be implemented in Q4 2016.

1.1.1 M.A. Juurlink (The

Netherlands, RDW)

Added R025, modified R030

1.1 P. Oude Weernink

(The Netherlands,

RDW)

Version for use with XSD version 1.1.

0.0.6 P. Oude Weernink

(The Netherlands,

RDW)

MaximumSpeedNonPropulsion for version 1.1. only mandatory

voor O and R vehiclecategories. The "S" vehicle category will be

added in version 1.2 of the XSD.

Rulenumbers R026, R027, R175 have been added to the documen-

tation.

0.0.5 P. Oude Weernink

(The Netherlands,

RDW)

Changes to controls of Height for N2 and N3 not applicable,

SmokeCorrectedAbsorptionCoeff check has changed to check if a

fuelgroup with a fuelcode is present the attribute has te be present.

(R050)

0.0.4 Theo Jacobs (The

Netherlands, RDW)

Amended version after meeting Groningen

0.0.3 Sjaak Kempe (The

Netherlands, RDW)

Amended version after meeting Venlo


Netherlands, RDW)

Amended version after meeting Venlo


Netherlands, RDW)

Draft.


Version Date: 0126-1002-20192020


Contents

Revision history ............................................................................................................................................... 1

CONTENTS ........................................................................................................................................................... 3

1 GOAL ............................................................................................................................................................. 4

2 INPUT ............................................................................................................................................................ 4

3 PROCESSING (GLOBAL DESCRIPTION) .............................................................................................. 4

4 OUTPUT ........................................................................................................................................................ 4

5 PROCESSING (DETAILS) .......................................................................................................................... 4

5.1 VERSION OF MESSAGE BOOK .................................................................................................................... 4 5.2 GENERAL PRINCIPLES ............................................................................................................................... 4 5.3 LIST OF MESSAGE ITEMS AND APPLICABLE RULES ..................................................................................... 5 5.4 RULES .................................................................................................................................................... 54 5.5 ERROR MESSAGES .................................................................................................................................. 59


Version Date: 0126-1002-20192020


1 Goal Content check of an electronically delivered Certificate of Conformity (CoC) or Individual Type Approval

(IAC).

2 Input A message InitalVehicleInformation.

3 Processing (global description) The contents of a certain message InitialVehicleInformation are checked against a set of business rules (for de-

tails see Chapter 5).

If no errors are detected, the output of the process consists of CheckResult = ‘OK’, otherwise the output consists

of CheckResult = ‘NotOK’, together with 1 or more error messages (code and description). For each error detect-

ed, one message is given.

4 Output

CheckResult (OK or NotOK).

0 …. NRuleNumber, MessageDesc. Only applicable If CheckResult = NotOK: 1 or more messages describ-

ing the error(s) found.

5 Processing (details)

5.1 Version of message book

The checks described below are based on message book version September 2019.

5.2 General principles

Since a content check is performed after successful XSD validation, situations that would not pass XSD

validation are not checked (such as a string that is too long, or a disallowed value for an item with a value

list).

The scope of the check is the contents of the CocDataGroup only. On the contents of other data groups in

the message no checks are performed.

A content check is always carried out completely, so that all errors discovered are reported.

The order in which checks are carried out, is not specified. So, the order of checking does not necessarily

correspond with the numbering of the rules in this document.

StageOfCompletionCode must be present at all times.

In some cases the VehicleCategoryCode within the ruledefinition contains an 'x' value. This always implies

that the rule applies to any value after the value mentioned before the 'x'value. For instance if M1x is

mentioned, the rule will apply to M1 and M1G. If Ox is mentioned the rule will apply to O1,O2,O3,O4.

5.3 List of message items and applicable rules

Note: Message items not part of the CoC data group, are omitted from this list, since no checks are performed on those items.

Rules mentioned in italic, are repeated per attribute they apply to, but in fact the rule has to be implemented only once.

Item name Version Rule in message book Technical

rule(s), vehicle com-plete (StageOfCompletionCode = ‘C’)

Technical rule(s), multi-stage vehicle (StageOfComple-tionCode =’ I’

Technical rule(s), multi-stage vehicle (StageOfComple-tionCode =‘V’)

Remarks

ActualMassIncomplVehicl 1.1 ActualMassOfTheVehicle 1.0 If one of the fields mentioned below is

applicable the ActualMassOfTheVehicle must be less then:

- TechnPermMaxLadenMass;

- TechnPermMaxMassCombina-tion;

- MaxPermLadenMassInternation-al;

- MaxPermMassCombinationInt;

- MaxPermLadenMassNational;

- MaxPermMassCombination-National.

R201,R202,R203,R204,R205,R206

R201,R202,R203,R204,R205, R206

R201,R202,R203,R204,R205, R206

AdditionalCouplingPointsCode 1.2 AdditionalInformation 1.0 AdditionalVehCat23WheelCode 1.0 AddressGroup 1.0 AddressLine1 1.0 AddressLine2 1.0 AddressLine3 1.0 AddressTable 1.0 Mandatory, minimum 1 occurrence Ad-

dressGroup R001 R001 R001

AddressTypeCode 1.0 Mandatory for the specification of the Address

R001 R001 R001

AdvancedBrakingSystemCode 1.1

AllowedEuropeanMarketIndicator 1.1

ApprovalMarkCouplingDevice 1.2


Version Date: 0126-1002-20192020


Item name Version Rule in message book Technical rule(s), vehicle com-plete (StageOfCompletionCode = ‘C’)



Remarks

ApprovalNrCouplingDevice 1.0

ApprovalNrCouplPtTrackTrainSet 1.2

ApprovalNumberCouplPtTyreAxle 1.2

ApprovalTerritoryCountryCode 1.2

ApprovalTerritoryGroup 1.2

ApprovalTerritoryTable 1.2

ArrangementOfCylindersCode 1.0

AveragePayload 1.5

AxleCombinationNumber 1.3

AxleGroup 1.0

AxleGroupGroup 1.0

AxleGroupNumber 1.0 R001,R301 R001,R301 R001,R301 Addition of rule 301 to enforce proper numbering.

AxleGroupTable 1.0

AxleNumber 1.0 From front to rear of the vehicle, starting with number 1. If an AxleTable is entered, this entry is mandatory.

R001,R301 R001,R301 R001,R301 Addition of rule 301 to enforce proper numbering. No rule for the remark Kingpin or coupling is not an axle (see: DistanceCouplPointFirstAxle).

AxleSpacing 1.0 Mandatory for vehicles of the categories M, N with more than two axles. And for the O, R and S categories with more than one axle. The axle with the maximum number cannot have an axle spacing.

R041,R042,R176,R307

R041,R042,R176,R307

R041,R042,R176,R307

Addition of rule 307 to enforce proper use of a single value or range values.

AxleSpacingMaximum 1.0 As AxleSpacing R176 R176 R176 Note that R041.R042. also applies

AxleSpacingMinimum 1.0 As AxleSpacing R176,R302,R303

R176,R302,R303

R176,R302,R303

Note that R041.R042. also applies Rule 302,303 enforces proper use of minimum-maximum items

AxleTable 1.0 Mandatory R001

AxleTrack 1.0 Mandatory for the vehicle categories M1, M2, N1, in case of complete vehicles. The value cannot exceed the value for Width.

R044,R209,R307

R209,R307 R209,R307 Addition of rule 307 to enforce proper use of a single value or range values.

AxleTrackMaximum 1.0 As AxleTrack R209 R209 R209 Note that R044 also applies

AxleTrackMinimum 1.0 As AxleTrack R209,R302,R303

R209,R302,R303

R209,R302,R303

Note that R044 also applies Rule 302,303 enforces proper use of minimum-maximum items

AxleWithAirSuspOrEquivInd 1.0 Mandatory for the vehicle categories O1, O2 O3 and O4 in case of complete vehi-

R004


Version Date: 0126-1002-20192020





Remarks

cles.

BallastMassMaterial 1.0

BallastMassNumberOfComponents 1.0

BallastMassTotal 1.0

BallastSetGroup 1.2

BallastSetMaterial 1.2

BallastSetMethodConstruction 1.2

BallastSetNumber 1.2

BallastSetNumberOfComponents 1.2

BallastSetTable 1.2

BaseVin 1.0

BodyIndicator 1.0

BodyworkGroup 1.0

BodyworkTable 1.0 Mandatory for complete vehicles of catego-ries M,N,O

R002,R003,R004

BrakedAxleInd 1.0

BrakedTrackSetInd 1.2

BrakedTypeTrailCode 1.2

BrakedTypeTrailGroup 1.2

BrakedTypeTrailTable 1.2

BrakingDesc 1.0

BrakingGroup 1.0

BrakingLockingRightLeftInd 1.2

BrakingTable 1.0

BrakingTransmissionTechnCode 1.2

BrakingTypeGroup 1.2

BrakingTypePowerAssistCode 1.2

BrakingTypePrincipalCode 1.2

BrakingTypeTable 1.2

CalculatedMaximumSpeed 1.0


Version Date: 0126-1002-20192020





Remarks

CappedSpeedIndicator 1.4

CategoryOfHybridElectricVehInd 1.1

ClassOfHybridVehicleCode 1.3 If this field has a value then at least two FuelGroups have to be present.

R035

ClassOfVehicleCode 1.0 Mandatory for the vehicle categories M2, M3 for complete vehicles and CodeForBod-ywork is CA-CW.

R012

CngFuellingSystemIndicator 1.0 No rule for the remark “To identify that the vehicle is equiped with a CNG fuelling system in case the fuel is compressed natural gas”

CO2DeterminationTyreInd 1.4

CocDataGroup 1.0

CodeForBodywork 1.0 Either CodeForBodywork or CodeForBod-yworkSpecPurpVeh must be filled in case of complete vehicles for the vehicle categories M,N,O.

R045,R304 R304 to prevent that CodeForBody-work/CodeForBodyworkSpecPurpVeh have the same value. No rule for the remark “Please note that the values SA-SK have been moved to CodeForBodyworkSpecPurpVeh in accordance with 678/2011.

CodeForBodyworkSpecPurpVeh 1.0 Either CodeForBodywork or CodeForBod-yworkSpecPurpVeh must be filled in case of complete vehicles for the vehicle categories M,N,O.

Note that R045 also applies. No rule for the remark “Please note that the values SA-SK have been moved to CodeForBodyworkSpecPurpVeh in accordance with 678/2011.

CombinedCO2 1.0 Mandatory for complete vehicles of the vehicle categories M1 and N1 except for: pure electric vehicles (no FuelCode pre-sent) heavy duty emission test (NrBaseRegu-lActLastAmendEngines) M1 with bodywork type SA, SC and SD (CodeForBodyworkSpecPurpVeh or CodeForBodyWork) OVC-hybrid vehicles - Plug-in hybrids

R021, R022,R191,R210

R210 R210


Version Date: 0126-1002-20192020





Remarks

For OVC-hybrid vehicles (Plug-in hybrids) use the item WeightedCombinedCO2.

The value “0” is not permitted.

CombinedCO2 1.3 CombinedCO2 is relevant for complete vehicles for the vehicle categories M1,M2,N1,N2. Mandatory in case of: ClassOfHybridVehicleCode is NOVC-HEV Or All ElectricEngineIndicators in the message are N. Except for:

Heavy duty emission tested vehi-cles where NrBaseRegulActLas-tAmendEngines is present. MassOfTheVehicleInRun-ningOrder >2585 kg M1 with bodywork type SA, SC and SD (CodeForBodywork-SpecPurpVeh or CodeForBod-yWork).

Not allowed: Pure electric vehicles where no FuelCode is present or ClassOfHybridVehicleCode is OVC-HEV, OVC-FCHV, NOVC-FCHV. CombinedCO2 and WeightedCombined-

R021, R186, R191,R210

R210 R210


Version Date: 0126-1002-20192020





Remarks

CO2 can’t both have a value The value “0” is not permitted.

CombinedCO2ConditionA 1.0 Use only for OVC-hybrid vehicles (Plug-in hybrids)

R175, R178

CombinedCO2ConditionB 1.0 Use only for OVC-hybrid vehicles (Plug-in hybrids)

R175, R178

CombinedFuelConsConditionA 1.0 Use only for OVC-hybrid vehicles (Plug-in hybrids)

R175, R178

CombinedFuelConsConditionB 1.0 Use only for OVC-hybrid vehicles (Plug-in hybrids)

R175, R178

CombinedFuelConsumption 1.0 Use for non hybrid, non plugin (NOVC) vehicles only

R177

CombinedFuelConsumption

1.3 CombinedFuelConsumption is relevant for complete vehicles for the vehicle categories M1,M2,N1,N2. Mandatory in case of: ClassOfHybridVehicleCode is NOVC-HEV Or All ElectricEngineIndicators in the message are N. Except for:

Heavy duty emission tested vehi-cles where NrBaseRegulActLas-tAmendEngines is present.

R021, R186, R0191, R210R022


Version Date: 0126-1002-20192020





Remarks

MassOfTheVehicleInRun-ningOrder >2585 kg M1 with bodywork type SA, SC and SD (CodeForBodywork-SpecPurpVeh or CodeForBod-yWork).

Not allowed: Pure electric vehicles where no FuelCode is present or ClassOfHybridVehicleCode is OVC-HEV, OVC-FCHV, NOVC-FCHV. CombinedFuelConsumption and WeightedCombinedFuelCons can’t both have a value The value “0” is not permitted.

CommercialName 1.0 Mandatory for complete vehicles of the vehicle categories M,N and O.

R002,R003,R004

No rule for the remark “Please use the exact commercial name as mentioned on the whole vehicle type approval and COC. As this field is used for statistical information it’s important to use consistent make descriptions for vehicles of the same commer-cial name. The field is also important in some memberstates for registration purposes.

CommercialNameGroup 1.0

CommercialNameTable 1.0 Mandatory for complete vehicles of catego-ry M,N,O.

R002,R003,R004

CompletedAlteredCode 1.0

ConfigurationOfDoors 1.0

ContinuousBrakedTowableMass 1.0

ConvertingPerformanceIndic 1.1

CountryOfResidence 1.0

CouplCharTechnPermTrailerMass 1.0


Version Date: 0126-1002-20192020





Remarks

CouplingCharacteristicValueD 1.0 For complete vehicles of the vehicle catego-ries M2-M3,N and O with a coupling device occurrence in the Mechanical-CouplingTable, at least one of the items CouplingCharacteristicValueD, Cou-plingCharacteristicValueDC, Cou-plingCharacteristicValueS, CouplingChar-acteristicValueU, CouplingCharacteris-ticValueV must be present

R013

CouplingCharacteristicValueDC 1.0 . For complete vehicles of the vehicle categories M2-M3,N and O with a coupling device occurrence in the Mechanical-CouplingTable. At least one of the items CouplingCharacteristicValueD, Cou-plingCharacteristicValueDC, Cou-plingCharacteristicValueS, CouplingChar-acteristicValueU, CouplingCharacteris-ticValueV must be present

Note that R013 also applies.

CouplingCharacteristicValueS 1.0 . For complete vehicles of the vehicle categories M2-M3,N and O with a coupling device occurrence in the Mechanical-CouplingTable. At least one of the items CouplingCharacteristicValueD, Cou-plingCharacteristicValueDC, Cou-plingCharacteristicValueS, CouplingChar-acteristicValueU, CouplingCharacteris-ticValueV must be present


CouplingCharacteristicValueU 1.0 For complete vehicles of the vehicle catego-ries M2-M3,N and O with a coupling device occurrence in the Mechanical-CouplingTable. At least one of the items CouplingCharacteristicValueD, Cou-plingCharacteristicValueDC, Cou-plingCharacteristicValueS, CouplingChar-acteristicValueU, CouplingCharacteris-ticValueV must be present



Version Date: 0126-1002-20192020





Remarks

CouplingCharacteristicValueV 1.0 For complete vehicles of the vehicle catego-ries M2-M3,N and O with a coupling device occurrence in the Mechanical-CouplingTable. At least one of the items CouplingCharacteristicValueD, Cou-plingCharacteristicValueDC, Cou-plingCharacteristicValueS, CouplingChar-acteristicValueU, CouplingCharacteris-ticValueV must be present


CouplingCharacValueHorizLoad 1.2

CouplingDevicesFittedGroup 1.0

CouplingDevicesFittedTable 1.0

CrawlerUndercarriageConfigCode 1.2

CryptHashCustomerFile 1.5

CryptHashManufacturerRecord 1.4

DateOfApplicationIndividualApp 1.0 Date cannot be in the future. R401 R401 R401

DateOfSignature 1.0 Mandatory for all COC’s. This is date of signature of the COC. Date cannot be in the future.

R102,R401 R102,R401 R102,R401

DeclaredMaximumSpeed 1.3

DeclaredMaximumSpeedRearward 1.3

DescriptionOfCompletion 1.0 For completed or altered incomplete vehi-cles only see 2007/46/EC 0.10(a) on the

COC.

R179

DescriptServiceAndMaintenance 1.2

DirectInjectionIndicator 1.0

DistanceCouplPointFirstAxle 1.0 Mandatory for centre axle trailers, semi trailers and rigid drawbar trailers

R043,R060,R061,R307

R307 R307 Addition of rule 307 to enforce proper use of a single value or range values.

DistanceCouplPointFirstAxleMax 1.0 As DistanceCouplPointFirstAxle Note that R043, R060 and R061 also apply

DistanceCouplPointFirstAxleMin 1.0 As DistanceCouplPointFirstAxle R302,R303 R302,R303 R302,R303 Note that R043, R060 and R061 also apply Rule 302,303 enforces proper use of minimum-maximum items

DistanceCouplPointLastAxle 1.2 R307 R307 R307

DistanceCouplPointLastAxleMax 1.2

DistanceCouplPointLastAxleMin 1.2 R302,R303 R302,R303 R302,R303

DistAxisFifthWheelForemost 1.0 R307 R307 R307 Addition of rule 307 to enforce proper use of a single value or


Version Date: 0126-1002-20192020





Remarks

range values.

DistAxisFifthWheelForemostMax 1.0

DistAxisFifthWheelForemostMin 1.0 R302,R303 R302,R303 R302,R303 Rule 302,303 enforces proper use of minimum-maximum items

DistCentreCouplDevRearVeh 1.0 Mandatory for complete vehicles of the vehicle category O. The value “0” is not permitted.

R047,R210,R227,R307

R210,R307 R210,R307 Addition of rule 307 to enforce proper use of a single value or range values.

DistCentreCouplDevRearVehMax 1.0 As DistCentreCouplDevRearVeh R210 R210 R210 Note that R047 also applies

DistCentreCouplDevRearVehMin 1.0 As DistCentreCouplDevRearVeh R210,R227,R302,R303

R210,R302,R303

R210,R302,R303

Note that R047 also applies. Rule 302,303 enforces proper use of minimum-maximum items

DistFrontVehCentreCouplDev 1.0 Mandatory for complete vehicles of the vehicle category Nx with any CodeForBod-ywork is BC or BD

R053,R307 R307 R307 Addition of rule 307 to enforce proper use of a single value or range values.

DistFrontVehCentreCouplDevMax 1.0 as DistFrontVehCentreCouplDev Note that R053 also applies

DistFrontVehCentreCouplDevMin 1.0 as DistFrontVehCentreCouplDev R302,R303 R302,R303 R302,R303 Note that R053 also applies Rule 302,303 enforces proper use of minimum-maximum items

DistrBallastMassTotalOnAxle 1.2

DistribMassCompletedVehAxleMin 1.0 Only applicable for incomplete vehicles

DistribMassIncompleteVehAxle 1.0 Only applicable for incomplete vehicles

DistribMassIncompleteVehCoupl 1.2

DistribUnladenMassAxle 1.0

DistrMassCompletedVehCouplMin 1.2

DistrMaxLadenMassTyreAxleSpec 1.0

DistrOfActualMassIncomplAxle 1.1

DistrOfActualMassIncomplCoupl 1.2

DistrOfMassRunningOrderAxle 1.0 Mandatory for complete vehicles of the vehicle category M2, M3, N1-N3 and O1-4

R003,R004,R007

DistrOfMassRunningOrderCoupl 1.2

DistrTechnPermisMassAxle 1.0

DownscalingFactor 1.4

DrawbarTypeGroup 1.2

DrawbarTypeTable 1.2

DriveAxleWithAirSuspOrEquivInd 1.0 Mandatory for the vehicle categories M2 , M3 , N2 and N3 in case of complete vehi-cles, in case of a powered axle. For the vehicle categories O1, O2 O3 and

R014,R180,R181

R180,R181 R180,R181


Version Date: 0126-1002-20192020





Remarks

O4, please use the entry AxleWithAir-SuspOrEquivInd

DriverPerceivedSoundLevel 1.0

DriverPercSoundLevNrBaseRegAct 1.0

DriverPercSoundLevTestMethod 1.2

DriverSeatTypeCategClassCode 1.2

DriverSeatTypeCategClassGroup 1.2

DriverSeatTypeCategClassTable 1.2

DriverSeatTypeCategoryCode 1.2

DriverSeatTypeCategoryGroup 1.2

DriverSeatTypeCategoryTable 1.2

DrivingCycleClassCode 1.4

DrivingDirectionCode 1.0

DualFuelType 1.1

EcoInnovationsGroup 1.0

EcoInnovationsTable 1.0

EcTypeApprovalNrFrameCab 1.0

EcTypeApprovalNrRollOverHoop 1.0

ElectricEnergyConsConditionA 1.0 Only applicable for complete vehicles of the vehicle categories M1 and N1 for OVC-hybrid vehicles (Plug-in hybrids).

R175, R178

ElectricEnergyConsConditionB 1.0 Only applicable for complete vehicles of the vehicle categories M1 and N1 for OVC-hybrid vehicles (Plug-in hybrids).

R175, R178

ElectricEnergyConsPureElectric 1.0

ElectricEnergyConsWeightedComb 1.0 Mandatory for complete vehicles of the vehicle categories M1 and N1 for OVC-hybrid vehicles (Plug-in hybrids).

R175, R178


Version Date: 0126-1002-20192020





Remarks

ElectricEngineIndicator 1.0 Mandatory for complete vehicles of the vehicle categories M,N and L. Needed to identify if the vehicle is powered by an

electric engine as electricity is no fueltype.

R002,R003,R005

ElectricRange 1.0

ElectricRangeExternChargeable 1.0 Mandatory for complete vehicles of the vehicle categories M1 and N1 for OVC-hybrid vehicles (Plug-in hybrids)

R175, R178

ElectricRangeExternChargeable

1.3 ElectricRangeExternChargeable is relevant for complete vehicles for the vehicle categories M1,M2,N1,N2. Mandatory in case of: ClassOfHybridVehicleCode is OVC-HEV or OVC-FCHV

R062

ElectricVehicleConfigurCode 1.1

ElectronicBrakingSystemCode 1.2

EmailAddress 1.0

EmisTestMassWLTP 1.3

EngineCapacity 1.0 Mandatory for complete vehicles of the vehicle categories M,N and L with a fuelcode (FuelCode) <>50, 90, 91. Not applicable where electricengineindica-tor = Y and no fuelgroup with a fuelcode is present.

R029 No rule defined for the remark: For rotary-piston (Wankel) engines, double the nominal engine swept volume.

EngineCodeAsMarkedOnTheEngine 1.0

EngineCycleCode 1.2

EngineEcTypeApprovalNumber 1.0

EngineGroup 1.0


Version Date: 0126-1002-20192020





Remarks

EngineNumber 1.0

EngineSpeedMaximumNetPower 1.0

EngineSpeedMaximumNet-PowerMax

1.3

EngineSpeedMaximumNetPowerMin 1.3

EngineSpeedPowerPowerTakeOff 1.0

EngineSpeedRatedEngineNetPower 1.2

EngineTable 1.0 Mandatory for complete vehicles of the vehicle categories M,N and L, T,C

R002,R003,R005,R010

ExceedingDimensionsIndicator 1.0 Mandatory if the vehicle dimensions are exceeding the 97/27/EG,(article 7).

No rule defined for the remark: Mandatory if the vehicle dimensions are exceeding the 97/27/EG,(article 7).

Exemptions 1.0

ExhaustEmissionLevelEuro 1.0 Mandatory for complete vehicles of the vehicle categories M,N with a fuelcode (FuelCode).

R017,R018

1.3 Mandatory for complete vehicles of the vehicle categories Mx,Nx, with a fuelcode (FuelCode). Mandatory for complete vehicles of the vehicle categorie Lx with a fuelcode (FuelCode).

R017,R018, R019

ExtraUrbanConditionsCO2 1.0 Mandatory for complete vehicles of the vehicle categories M1 and N1 except for: pure electric vehicles (no FuelCode pre-sent) heavy duty emission test (NrBaseRegu-lActLastAmendEngines) M1 with bodywork type SA, SC and SD (CodeForBodyworkSpecPurpVeh) OVC-hybrid vehicles – Plug-in hybrids


R021, R022,R210

R210 R210


Version Date: 0126-1002-20192020





Remarks


1.3 ExtraUrbanConditionsCO2 is relevant for complete vehicles for the vehicle categories M1,M2,N1,N2. Mandatory in case of: ClassOfHybridVehicleCode is NOVC-HEV Or All ElectricEngineIndicators in the message are N. Except for:

Heavy duty emission tested vehi-cles where NrBaseRegulActLas-tAmendEngines is present. MassOfTheVehicleInRun-ningOrder >2585 kg M1 with bodywork type SA, SC and SD (CodeForBodywork-SpecPurpVeh or CodeForBod-yWork).

Not allowed: Pure electric vehicles where no FuelCode is present or ClassOfHybridVehicleCode is OVC-HEV, OVC-FCHV, NOVC-FCHV The value “0” is not permitted.

R021, R186, R191, R022,R210

R210 R210

ExtraUrbanConditionsFuelCons 1.0 Mandatory for complete vehicles of the vehicle categories M1 and N1 except for: pure electric vehicles (no FuelCode pre-sent)

R021, R022,R210

R210 R210


Version Date: 0126-1002-20192020





Remarks

heavy duty emission test (NrBaseRegu-lActLastAmendEngines) M1 with bodywork type SA, SC and SD (CodeForBodyworkSpecPurpVeh) OVC-hybrid vehicles – Plug-in hybrids



1.3 ExtraUrbanConditionsFuelCons is relevant for complete vehicles for the vehicle cate-gories M1,M2,N1,N2. Mandatory in case of: ClassOfHybridVehicleCode is NOVC-HEV Or All ElectricEngineIndicators in the message are N. Except for:

Heavy duty emission tested vehi-cles where NrBaseRegulActLas-tAmendEngines is present. MassOfTheVehicleInRun-ningOrder >2585 kg

Not allowed: Pure electric vehicles where no FuelCode is present or ClassOfHybridVehicleCode is OVC-HEV, OVC-FCHV. The value “0” is not permitted.

R021, R186, R191 , R210

R210 R210


Version Date: 0126-1002-20192020





Remarks

ExtSoundLevelNrBaseRegulAct 1.0

FamilyIdentifierCode 1.4

FamilyIdentifierValue 1.4

FifthWheelLead 1.0 Mandatory for complete vehicles of the vehicle categories N1, N2, N3 and type of bodywork BC (CodeForBodywork)

R048,R307 R307 No rule for the remark “In case of a complete or completed vehicle without coupling with slider (adjustable) state only one value.

In case of a complete or completed vehicle with coupling with slider (adjustable) use the FifthWheelLeadMinimum and FifthWheelLeadMaximum. Addition of rule 307 to enforce proper use of a single value or range values.

FifthWheelLeadMaximum 1.0 As FifthWheelLead Note that R048 also applies

FifthWheelLeadMinimum 1.0 As FifthWheelLead R302,R303 R302,R303 R302,R303 Note that R048 also applies Rule 302,303 enforces proper use of minimum-maximum items

FinalDriveGroup 1.1

FinalDriveNumber 1.1 R301 R301 R301

FinalDriveRatio 1.1

FinalDriveRatioVeh 1.2

FinalDriveTable 1.1

FinalDriveVehGroup 1.2

FinalDriveVehNumber 1.2 R301 R301 R301

FinalDriveVehTable 1.2

FiscalPowerOrNatCodeNrs 1.0

FiscalPowerOrNatCodeNrsGroup 1.0

FiscalPowerOrNatCodeNrsTable 1.0

FiscPowOrNatCodeNrsCoun-tryCode

1.0

FrameOrCabMake 1.0

FrontalAreaWLTP 1.3

FuelCode 1.0 Mandatory for non pure electric complete vehicles of the vehicle categories M,N, L,T and C.

R023


Version Date: 0126-1002-20192020





Remarks

1.3 Forbidden in at least one fuelgroup for hybrid vehicles

R023,R037

FuelGroup 1.0

FuelTable 1.0 Mandatory for complete vehicles of the vehicle categories M,N,L,T,C

R002,R003,R005,R010

1.3 Mandatory for complete vehicles of the vehicle categories M,N,L,T,C Must have at least 2 groups when ClassOf-HybridVehicleCode has a value Must have at least 2 groups when Hy-bridVehIndicator is Y

R002,R003,R005,R010,R035,R036

FuelTypeCode 1.0 Trifuel shall not be used in case of a vehicle with a type approval as it is not possible to grant a type approval.

R306 R306 R306

GearboxTypeCode 1.0 Mandatory for complete vehicles of the vehicle categories M2,M3 and N1,N2,N3. Not applicable where electricengineindica-tor = Y and no fuelgroup with a fuelcode is present

R015,R018

GearGroup 1.0 Mandatory for complete vehicles of the vehicle categories M2,M3 and N1,N2,N3.

R015,R018

GearNumber 1.0 Unique sequential number in order to identify the Gear informationset

R301 R301 R301

GearRatio 1.0 No rule defined for the remark In case of GearboxTypeCode = CVT,W or O.

GearRatioGroup 1.0

GearRatioTable 1.0

GeneralCodeOfTheEcoInnovations 1.0

GeneralDescriptionMachinery 1.2

GroundClearanceBetweenAxles 1.1 …

Height 1.0 Complete vehicles maximum value 4000. If the measurement exceeds the European

R040,R220,R307



Version Date: 0126-1002-20192020





Remarks

legal boundaries, the ExceedingDimen-sionsIndicator has to be filled with the value “Y”. Height or HeightMini-mum/HeightMaximum are mandatory in case of complete vehicles Except for vehi-cles with the vehicle categories N2 and N3.

HeightCouplingAboveGroundMax 1.0

HeightCouplingAboveGroundMin 1.0 R302,R303 R302,R303 R302,R303 Rule 302,303 enforces proper use of minimum-maximum items

HeightMaximum 1.0 As Height R220

HeightMinimum 1.0 As Height R220, R302,R303

R302,R303 R302,R303 Rule 302,303 enforces proper use of minimum-maximum items

HybridApplicationCode 1.1

HybridApplicationGroup 1.1

HybridIndicator 1.0 This field is mandatory for complete vehicles of the categories Mx and Nx.

R002,R003,

HybridIndicator 1.3 Forbidden for version 1.3 and higher. R179 R179 R179

HybridVehIndicator 1.3 This field is mandatory for complete vehicles of the categories M3 and N3. If this field is stated “Y” then at least two FuelGroups have to be present.

R016, R036

HydrLiftThreePointCouplingInd 1.0

IdentEngineType 1.2

IdentEngineTypeLocation 1.0

IdentEngineTypeMethodAffixing 1.0

IndependBrakedTowableMass 1.0 No rule defined for the following remarks In case of an incomplete, complete or completed vehicle and the vehicle is equiped with a coupling state maximum value

In case of an incomplete, complete or completed vehicle and the vehicle can be equiped with a coupling state maximum value


Version Date: 0126-1002-20192020





Remarks

In case of an incomplete, complete or completed vehicle and the vehicle can not be equiped with a coupling state maximum value “0” or skip this entry in the xml

IndividualApprovalNumber 1.0 The field has to be used to add the individu-al approval number in case of an Individual Approval Certificate (TypeApprovalType-Code = IND).

R101,R183 R101,R183 R101,R183

IndividualApprovalTypeCode 1.0 The field has to be used in case of an Indi-vidual Approval Certificate.

R101,R183 R101,R183 R101,R183

IndividualApprovalVersionNr 1.0 The field has to be used in case of an Indi-vidual Approval Certificate.

R101,R183 R101,R183 R101,R183 No rule defined for the remark The number has to be increased in case of a revision or correction of the original Individual Approval Certificate. If a new Individual Approval Certificate has been issued the number has to contain the value “0”.

IndivisibleLoadInd 1.2

InertiaBrakedTowableMass 1.0 No rule defined for the remark In case of an incomplete, complete or completed vehicle and the vehicle is equiped with a coupling state maximum value



InServiceMaxMassIntGroup 1.0

InServiceMaxMassIntTable 1.0

InServiceMaxMassNatGroup 1.0

InServiceMaxMassNatTable 1.0

IntendedCountryOfRegistrCode 1.0

InterconnOfBrakedAxle 1.0

InterconnOfPoweredAxles 1.0

InterconnWithBrakedAxleGroup 1.0

InterconnWithBrakedAxleNumber 1.0

InterconnWithBrakedAxleTable 1.0

InterconnWithPoweredAxleGroup 1.0


Version Date: 0126-1002-20192020





Remarks

InterconnWithPoweredAxleNumber 1.0

InterconnWithPoweredAxleTable 1.0

Iso7638ConnectorInd 1.3

IVIReferenceId 1.0

LastPossDateOfRegistration 1.4

Length 1.0 Complete vehicles: maximum value 18750. M1, Nx max 12000 M2,M3 max 18750 Ox AND DB,DC,DE,SA,SG max 12000 If the measurement exceeds the European legal boundaries, the ExceedingDimen-sionsIndicator has to be filled with the value “Y”. Length or LengthMini-mum/LengthMaximum are mandatory in case of complete vehicles.

R046,R221,R222,R223,R307

R307 R307 No rule defined for the remark If the measurement exceeds the European legal boundaries, the ExceedingDimensionsIndicator has to be filled with the value “Y”. Addition of rule 307 to enforce proper use of a single value or range values.

LengthMaximum 1.0 As Length R221,R222,R223

LengthMinimum 1.0 As Length R302,R303 R302,R303 R302,R303 Rule 302,303 enforces proper use of minimum-maximum items

LengthOfTheLoadingArea 1.0 R307 R307 R307 Addition of rule 307 to enforce proper use of a single value or range values.

LengthOfTheLoadingAreaMaximum 1.0

LengthOfTheLoadingAreaMinimum 1.0 R302,R303 R302,R303 R302,R303 Rule 302,303 enforces proper use of minimum-maximum items

LiftAxleInd 1.0 Mandatory for VehicleCategoryCode N2, N3, O1, O2, O3, O4

R004,R020

LimitValueSoundLUrban 1.3

LoadableAxleInd 1.0

LoadCapacityIndexSingleWheel 1.0

LoadCapacityIndexTwinWheel 1.0

LoadPlatformDimensionsHeight 1.0

LoadPlatformDimensionsLength 1.0

LoadPlatformDimensionsWidth 1.0

LoadPlatformGroup 1.2


Version Date: 0126-1002-20192020





Remarks

LoadPlatformHeightAboveGround 1.2

LoadPlatformLength 1.2

LoadPlatformLoadCapacity 1.2

LoadPlatformTable 1.2

LoadPlatformTechPermLoad 1.0

LoadPlatformWidth 1.2

LocationOfEngineIdentification 1.2

LocationOfTheCouplingCode 1.2

LocationOfTheVinCode 1.0

LocationOfTheVinCode23Wheel 1.0 Mandatory for VehicleCategoryCode Lx R005

LocOfTheStatutoryPlates23Wheel 1.0 Mandatory for VehicleCategoryCode Lx R005

LocOfTheStatutoryPlatesCode 1.0

LpgFuellingSystemIndicator 1.0

Make 1.0 No rule defined for the remark Use the exact Make description as mentioned on the whole vehicle type approval and COC. As this field is used for statistical information it’s important to use consistent make descriptions for vehicles of the same make. The field is also important in some member states for registration purposes

MakeGroup 1.0

MakeRollOverHoop 1.0

MakeTable 1.0 Mandatory R001 R001 R001

ManufacturerHybridApplication 1.1

ManufacturerOfTheEngine 1.0

ManufacturerPlateLocation 1.0

ManufacturerPlateMethodOfAffix 1.0

MassIncompleteVehRunningOrder 1.0

MassOfTheVehicleInRunningOrder 1.0 If applicable the value must be less then the values for : TechnPermMaxLadenMass; TechnPermMaxMasCombination; MaxPermLadenMassInternational; MaxPermMassCombinationInt; MaxPermLadenMassNational; MaxPermMassCombinationNational.

R201,R202,R203,R204,R205,R206

R201,R202,R203,R204,R205, R206

R201,R202,R203,R204,R205, R206


Version Date: 0126-1002-20192020





Remarks

Max15MinutesPowerFuel 1.3

MaxHourlyPowerFuel 1.2

Maximum15MinutesPower 1.1

Maximum15MinutesPower 1.2

MaximumAssistanceFactor 1.1

MaximumAssistanceSpeed 1.1

MaximumContinuousRatedPower 1.0 The field can be used for electric engines only. It’s also allowed to add this field in case of a hybrid electrical vehicle.

R185

MaximumHourlyPower 1.1

MaximumNetPower 1.0 The field has to be used for combustion engines only.

R086,R186

MaximumNetPowerElectricEngine 1.1

MaximumPermissibleHeight 1.0

MaximumPermissibleLength 1.0 R307 R307 R307

MaximumPermissibleLengthMax 1.2

MaximumPermissibleLengthMin 1.2 R302,R303 R302,R303 R302,R303

MaximumPermissibleMassTrackSet 1.2

MaximumPermissibleRearOverhang 1.0

MaximumPermissibleWidth 1.0 R307 R307 R307

MaximumPermissibleWidthMax 1.2

MaximumPermissibleWidthMin 1.2 R302,R303 R302,R303 R302,R303

MaximumSpeed 1.0 MaximumSpeed must be present at least once in a FuelTable.

R025 R025 only applies for COC based on xsd version 1.0

MaximumSpeed 1.1 MaximumSpeed or must be present at least once in a FuelTable or MaximumSpeed-NonPropulsion must be present.

R030 R030 only applies for COC based on xsd version 1.1

MaximumSpeedNonPropulsion 1.1 Mandatory for complete vehicle categories O,R

R004,R008,R009

Note that R030 also applies

MaximumSpeedRearward 1.2

MaxNetPowerElectricEngFuel 1.2

MaxPercentBiofuelAcceptInFuel 1.0


Version Date: 0126-1002-20192020





Remarks

MaxPermLadenMassAxleCoun-trCode

1.0

MaxPermLadenMassAxleGrCCode 1.0

MaxPermLadenMassAxleGrInt 1.0 The value has to be less then or equal to the TechPermMassAxleGroup

R211 R211 R211 Value has to be less or equal to TechPermMassAxleGroup

MaxPermLadenMassAxleGrIntGroup 1.0

MaxPermLadenMassAxleGrIntTable 1.0

MaxPermLadenMassAxleGrNat 1.0 The value has to be less then or equal to the TechPermMassAxleGroup

R211 R211 R211

MaxPermLadenMassAxleGrNat-Group

1.0

MaxPermLadenMassAxleGrNatTable 1.0

MaxPermLadenMassAxleInt 1.0 The value has to be less then or equal to the TechnicallyPermMassAxle.

R213 R213 R213

MaxPermLadenMassAxleIntGroup 1.0

MaxPermLadenMassAxleIntTable 1.0

MaxPermLadenMassAxleNatGroup 1.0

MaxPermLadenMassAxleNational 1.0 The value has to be less then or equal to the TechnicallyPermMassAxle.

R213 R213 R213

MaxPermLadenMassAxleNatTable 1.0

MaxPermLadenMassGrTrafficRegul 1.0

MaxPermLadenMassInternational 1.0 The value has to be less then or equal to the TechnPermMaxLadenMass.

R207 R207 R207

MaxPermLadenMassNational 1.0 The value has to be less then or equal to the TechnPermMaxLadenMass.

R207 R207 R207

MaxPermLadenMassTrafficRegul 1.0

MaxPermMassCombinationInt 1.0 The value has to be less then or equal to the TechPermMaxMassCombination.

R208 R208 R208 No rule defined for the remark In case of an incomplete, complete or completed vehicle and the vehicle is equiped with a coupling state maximum value


In case of an incomplete, complete or completed vehicle and the vehicle can not be equiped with a coupling state maximum value


Version Date: 0126-1002-20192020





Remarks

“0” or skip this entry in the xml MaxPermMassCombinationNational 1.0 The value has to be less then or equal to the

TechPermMaxMassCombination. R208 R208 R208 No rule defined for the remark

In case of an incomplete, complete or completed vehicle and the vehicle is equiped with a coupling state maximum value



MaxPermMassIntTrafficRegul 1.0

MaxPermMassNatTraffCountryCode 1.0

MaxPermPosCOGCompletedVeh 1.0

MaxPermVertLoadCplPoint 1.2

MeansOfIdentificationOfType 1.0

MechanicalCouplingGroup 1.0

MechanicalCouplingTable 1.0 R004,R020

MechanicalCouplingTypeEu 1.2

MechnicalCouplingMake 1.0

MechnicalCouplingType 1.0

MethodOfAffixEngineIdentNumber 1.2

MethodOfAttachmStatPlatesCode 1.0

MetricImperialSpeedometerCode 1.0

MinMassVehCompleted 1.0 The field is mandatory for incomplete vehicles of the vehicle category M,N and O

R002,R003,R004

Name 1.0 R001 R001 R001

NameOfSigner 1.0

NEDCDeviationFactor 1.3

NEDCVerificationFactor 1.3

NrBaseRegulActLastAmendEngines 1.0 Either this field is mandatory for vehicles with a WVTA and a combustion engine or the NrBaseRegulActLastAmendMotVeh depending on the method of testing. The field must always contain the character

R111 Seems that a WVTA is mandatory in 2015. Simplified the rule to: For any vehicle with a combustion engine, either this field or NrBaseRegulLastAmendMotVeh is present. No rule defined for the remark “The field must always contain


Version Date: 0126-1002-20192020





Remarks

corresponding to the provisions used for the type approval. In some member states environmental zones for entering city centres are based on this field.

the character corresponding to the provisions used for the type approval”.

NrBaseRegulActLastAmendMotVeh 1.0 Either this field is mandatory for vehicles with a WVTA and a combustion engine or the NrBaseRegulActLastAmendEngines depending on the method of testing. The field must always contain the character corresponding to the provisions used for the type approval. In some member states environmental zones for entering city centres are based on this field.

See NrBaseRegulActLastAmendEngines

NrOfPassSeatingPosLowerDeck 1.0 Forbidden for <> M2,M3 R190 R190 R190

NrOfPassSeatingPosUpperDeck 1.0 Forbidden for <> M2,M3 R190 R190 R190

NrOfSeatingPositionExclDriver 1.0

NrOfSeatingPositions 1.0

NrOfWheelchairUserAccessPos 1.0

NumberForBodywork 1.0

NumberOfAxles 1.0 This field is mandatory for all vehicle cate-gories. The coupling device is not an axle. The vehicle categories M,N and L must at least have 2 axles. The vehicle categories T,C, R, S and O must at least have 1 axle.

R001,R214,R215

R214,R215 R214,R215

NumberOfAxlesWithTwinWheels 1.0

NumberOfBrakedAxles 1.0

NumberOfBrakedSetOfTrackTrains 1.2

NumberOfCylinders 1.0 No rule defined for the remark “For rotary engines count the number of rotors, to determine the number of cylinders.”

NumberOfDoors 1.0

NumberOfPoweredAxles 1.0 The field is mandatory for the vehicle categories M and N

R002,R003

NumberOfPoweredSetOfTrackTrain 1.2


Version Date: 0126-1002-20192020





Remarks

NumberOfPowerTakeOffs 1.2

NumberOfRatiosFront 1.0

NumberOfRatiosRear 1.0

NumberOfSetsBallastMasses 1.2

NumberOfStandingPlaces 1.0 Forbidden <> M2,M3 R190 R190 R190

NumberOfSteeredAxles 1.0

NumberOfTheMemberState 1.0 This field is mandatory for the Individual Approval Certificate (IAC).

R101

NumberOfWheels 1.0 This field is mandatory for all vehicle cate-gories. Twin wheels have to be indicated as two wheels.

R001,R216

NumericAlphanumIdentifCode 1.0

OdometerReading 1.0

OdometerUnitCode 1.0 R112 R112 R112

OdometerReadingUnitCode 1.4

OffVehicleChargingIndicator 1.0 This field is used to identify Plug-in hybrides. In some memberstates the field is relevant for taxation purposes of environmental policies. Must be absent if OffVehicleChargingVe-hInd is present.

R182 R182 R182 No direct rule on the item itself. Item is, however, used in various rules to identify plug-in hybrids.

OffVehicleChargingVehInd 1.2 This field is used to identify Plug-in hybrides. In some memberstates the field is relevant for taxation purposes of environmental policies.

No direct rule on the item itself. Item is, however, used in various rules to identify plug-in hybrids.

OptionalDevice 1.2

OptionalDevicesGroup 1.2

OptionalDevicesTable 1.2

OptionalLightSignallingDevices 1.0

OtherBodywork 1.2

OtherEmissionLegislation 1.0

OverallGearRatioHighestGear 1.1

OverallGearRatioHighGearVeh 1.2

PartOfAxleGroupNumber 1.0

PhoneNumber 1.0


Version Date: 0126-1002-20192020





Remarks

PlaceOfResidence 1.0

PlaceOfSignature 1.0

PositionOfPassengersSeats 1.2

PositionOfSeats 1.0

PositionOfSigner 1.0

PositionRollOverHoopCode 1.0

PoweredAxleInd 1.0 This field is mandatory for the vehicle categories M and N

R002,R003

PoweredTrackSetInd 1.2

PowerMassRatio 1.0 This field is mandatory for the vehicle category L and FuelCode is present.

R019 R019 R019

PowerPowerTakeOff 1.0

PressFeedLineBraking 1.2

PressFeedLineSingleLineBraking 1.0 No rule defined for the remark In case of an incomplete, complete or completed vehicle and the vehicle is equiped with a coupling state maximum value



PressFeedLineTwoLineBraking 1.0 No rule defined for the remark In case of an incomplete, complete or completed vehicle and the vehicle is equiped with a coupling state maximum value



PrimaryColourCode 1.0 This field is mandatory for the vehicle categories M1 and N1 for complete vehi-

R006


Version Date: 0126-1002-20192020





Remarks

cles.

ProductionSequentialNumber 1.0 This field is mandatory for small series vehicles. As the regulations gives maximum values for the small series it is necessary to state the production sequential number of the vehicle.

R104 R104 R104

ProductionTyreRimVehInd 1.3

ProductionYear 1.0 This field is mandatory for small series vehicles

R104 R104 R104

ProjectFrontAreaAirFrontGrill 1.4

ProtectHazardSubstAerisolInd 1.2

ProtectHazardSubstCabCatGroup 1.2

ProtectHazardSubstCabCatTable 1.2

ProtectHazardSubstCabineCateg 1.2

ProtectHazardSubstCabineGroup 1.2

ProtectHazardSubstDustFiltInd 1.2

ProtectHazardSubstVapFilterInd 1.2

ProtectiveStructFoldAssistCode 1.3

ProtectiveStructureApplicCode 1.2

ProtectiveStructureCode 1.2

ProtectiveStructureEquipmCode 1.2

ProtectiveStructureFoldablCode 1.2

ProtectiveStructureFoldingCode 1.2

ProtectiveStructureGroup 1.2

ProtectiveStructureMake 1.2

ProtectiveStructureRopsByCode 1.2

ProtectiveStructureTable 1.2

ProtectStructLockingMechnCode 1.2

ProtectStructTypeApprovalNumb 1.2

ProtectStructurePositionCode 1.2

ProvisionalApprovalIndicator 1.0

PtoCorrespondingEngineSpeed 1.2

PtoGroup 1.2

PtoLocationCode 1.2


Version Date: 0126-1002-20192020





Remarks

PtoLocationOtherDescription 1.2

PtoPower 1.2

PtoPowerGroup 1.2

PtoPowerTable 1.2

PtoRatedSpeedRange 1.2

PtoRevolutions 1.2

PtoTable 1.2

PtoTypeCode 1.2

PureElectricIndicator 1.0

PureElectricVehIndicator 1.3

RatedEngineNetPower 1.2

RearOverhang 1.0 This field is mandatory for complete vehicles of the categories N2, N3, M2,M3 and O.

R049,R307 R307 R307 Addition of rule 307 to enforce proper use of a single value or range values.

RearOverhangMaximum 1.0 As RearOverhang Note that R049 also applies

RearOverhangMinimum 1.0 As RearOverhang R302,R303 R302,R303 R302,R303 Note that R049 also applies Rule 302,303 enforces proper use of minimum-maximum items

RecomTyrePressurePascalMax 1.5

RecomTyrePressurePascalMin 1.5

RecommendedTyrePressure 1.1

RecomTyrePressureLoadCode 1.1

RecomTyrePressurePascal 1.2

RecomTyrePressureUseCode 1.2

RegulActApprovalCode 1.0

RegulActInclLastAmend 1.0

RegulActInclLastAmendRemark 1.0

RegulActInclLastAmendSubjNr 1.0

RegulationAct 1.0

RegulationsGroup 1.0

RegulationsTable 1.0

Remarks 1.0

RetractableOrLoadableAxleInd 1.0

ReversibleDrivingPositionInd 1.0

RevisionDate 1.0 R401, R401, R401,


Version Date: 0126-1002-20192020





Remarks

RightLeftHandTrafficCode 1.0

RimSizeIncludingOffSet 1.0

RoadLoadCoefF0WLTP 1.3



RollingRadiusTyre 1.2

RollingResistanceClassCode 1.3

SeatForUseOnlyWhenTheVehStat 1.0

SeatingHeight 1.1

SeatingPositionConfigCode 1.2

SecondaryColourCode 1.0 The PrimaryColourCode cannot be the same as SecondaryColourCode

R305 R305 R305

SigningAuthorityGroup 1.0

SigningAuthorityTable 1.0 Mandatory, at least 1 occurrence Sign-ingAuthorityGroup

R001 R001 R001

SmokeCorrectedAbsorptionCoeff 1.0

SoundLevelDriveBy 1.0

SoundLevelStatEngineSpeed 1.0

SoundLevelStationary 1.0

SpecificCO2Emissions 1.5

SpeedCategorySymbol 1.0

StageDate 1.0 Issue date of the stage approval for every entry in the COC for multistage vehicles

R401 R401 Assumed that date cannot be in the future.

StageEcType 1.2

StageEcTypeApprovalNumber 1.0 Type approval number of thestage for every entry in the COC for multistage vehicles.

StageEcVariant 1.2

StageEcVersion 1.2

StageManufacturerName 1.0 Name of the manufacturer of the stage, for every entry in the COC for multistage vehicles.

StageManufacturerNumber 1.0 StageManufacturerNumber should be used to indicate the subsequent stages.

StageNrOfManufacturingGroup 1.0

StageNrOfManufacturingTable 1.0


Version Date: 0126-1002-20192020





Remarks

StageOfCompletionCode 1.0 This field is mandatory for all vehicle cate-gories. In some member states the value is needed for registration purposes.

R001 R001 R001 No rule for the remark “For two and three wheeled vehicles state the value “C” with 2002/24/EC Approval. For approvals 168/213 or newer state the actual value. In the regulatory act 168/213 it’s possible to have incomplete vehicles for the L category.”

SteerByArtCentrAxisDirTrTrInd 1.2

SteerByArtCentrAxisTrTrainInd 1.2

SteerByPivotingOpposTracTraInd 1.2

SteeredAxleInd 1.0

SteeringBySpeedSideTracTraInd 1.2

SteeringCategoryCode 1.0

TankCapacityTankerVehicle 1.0

TechnicallyPermMassAxle 1.0 R307 R307 R307

TechnicallyPermMassAxleMax 1.2

TechnicallyPermMassAxleMin 1.2 R302,R303 R302,R303 R302,R303

TechnicallyPermMassTrackSet 1.2 R307 R307 R307

TechnicallyPermMassTrackSetMax 1.2

TechnicallyPermMassTrackSetMin 1.2 R302,R303 R302,R303 R302,R303

TechnPermisMaxMassAxle 1.0

TechnPermisMaxMassVehAxle 1.2

TechnPermisMaxMassVehTrackSet 1.2

TechnPermMaxLadenMass 1.0 This field is mandatory for the vehicle categories M,N,L and O.

R002,R003,R004,R005,R208, R307

R208, R307

R208, R307

Note that R208 is listed under TechnPermMaxMassCombina-tion

TechnPermMaxLadenMassTyreSpec 1.0 The technically permissible maximum laden mass according to the tyre specification is only used by agricultural vehicle. This entry makes it possible to differ in technical permissible maximummasses.

R187 R187 R187

TechnPermMaxMassCombination 1.0 This field is mandatory for the vehicle categories M2,M3 and N for complete vehicles if the vehicle is equipped with a coupling device. (DistFrontVehCentre-CouplDev) has a value.

R011 For the rule “The value has to be higher then the TechnPer-mMaxLadenMass” see TechnPermMaxLadenMass. No rule for the remark In case of an incomplete, complete or completed vehicle, equiped with a coupling system state maximum value


Version Date: 0126-1002-20192020





Remarks

In case of an incomplete, complete or completed vehicle, which can be equiped with a coupling state maximum value

In case of an incomplete, complete or completed vehicle and the vehicle can not be equiped state maximum value maximum value “0” or skip this entry in the xml

TechnPermMaxMassCombinTrail 1.2 R307 R307 R307

TechnPermMaxMassCombinTrail-Max

1.2

TechnPermMaxMassCombin-TrailMin

1.2 R302,R303 R302,R303 R302,R303

TechnPermMaxMassThreePointLift 1.3

TechPermMassAxleGroup 1.0

TechPermMaxLadenMassMax 1.2

TechPermMaxLadenMassMin 1.2 R302,R303 R302,R303 R302,R303

TechPermMaxMassTyreComb 1.3

TechPermMaxStatMassCouplPoint 1.0 This field is only applicable for vehicles of the categories O, R and S.

R188 R188 R188

TechPermMaxStatVertLoadCouplPt 1.0 The technically permissible vertical load on the coupling point according to the tyre specification is only used by agricultural vehicles. This entry makes it possible to differ in technical permissible maximummasses due multiple tyre specifications.

R187 R187 R187

TechPermMaxStatVertMassCouplPt 1.0 This field is only applicable for vehicles of the categorie L,M , N, T and C..

R189 R189 R189 No rule for the remark In case of an incomplete, complete or completed vehicle, equiped with a coupling system state maxi-mum value In case of an incomplete, complete or completed vehicle, which can be equiped with a coupling state maximum value In case of an incomplete, complete or completed vehicle and the vehicle can not be equiped state maximum value maximum


Version Date: 0126-1002-20192020





Remarks

value “0” or skip this entry in the xml

TechPermMaxTowableMassTrailer 1.0 No rule for the remark In case of an incomplete, complete or completed vehicle, equiped with a coupling system state maximum value



TechPermMaxTowMassBrakedTrail 1.0 No rule for the remark In case of an incomplete, complete or completed vehicle, equiped with a coupling system state maxi-mum value In case of an incomplete, complete or completed vehicle, which can be equiped with a coupling state maximum value In case of an incomplete, complete or completed vehicle and the vehicle can not be equiped state maximum value maximum value “0” or skip this entry in the xml

TechPermMaxTowMassCentAxTrail 1.0 For vehicles of the categories M, N1 the value can not exceed the 3500 kg.

R217 R217 R217 No rule for the remark This field is also mandatory for the incomplete vehicles of the categories M and N which are suitable for a coupling device for the centre axle trailer. If the vehicle is not quipped with a coupling device the field has to be ignored In case of an incomplete, complete or completed vehicle, equiped with a coupling system state maximum value In case of an incomplete, complete or completed vehicle, which can be equiped with a coupling state maximum value In case of an incomplete, complete or completed vehicle and the vehicle can not be equiped state maximum value maximum value “0” or skip this entry in the xml


Version Date: 0126-1002-20192020





Remarks

TechPermMaxTowMassDrawbar-Trail

1.0 For vehicles of the categories M, N1 the value can not exceed the 3500 kg.

R217 R217 R217 No rule for the remark This field is also mandatory for the incomplete vehicles of the categories M and N which are suitable for a coupling device for the centre axle trailer. If the vehicle is not quipped with a coupling device the field has to be ignoredIn case of an incomplete, complete or completed vehicle, equiped with a coupling system state maximum value



TechPermMaxTowMassSemiTrailer 1.0 For vehicles of the categories M, N1 the value can not exceed the 3500 kg.

R217 R217 R217 No rule for the remark This field is also mandatory for the incomplete vehicles of the categories M and N which are suitable for a coupling device for the centre axle trailer. If the vehicle is not quipped with a coupling device the field has to be ignored In case of an incomplete, complete or completed vehicle, equiped with a coupling system state maximum value In case of an incomplete, complete or completed vehicle, which can be equiped with a coupling state maximum value In case of an incomplete, complete or completed vehicle and the vehicle can not be equiped state maximum value maximum value “0” or skip this entry in the xml

TechPermMaxTowMassTrailer 1.2 R307 R307 R307

TechPermMaxTowMassTrailerMax 1.2

TechPermMaxTowMassTrailerMin 1.2 R302,R303 R302,R303 R302,R303

TechPermMaxTowMassUnbrTrailer 1.0 For vehicles of the categories M1x, N1x the

value can not exceed the 750 kg.

R218 R218 R218 This field is also mandatory for the incomplete vehicles of the categories M1x and N1x which are suitable for a coupling device for the centre axle trailer.


Version Date: 0126-1002-20192020





Remarks

If the vehicle is not equipped with a coupling device the field has to be ignored No rule for the remark In case of an incomplete, complete or completed vehicle, equiped with a coupling system state maximum value



TecPerMaxStVertLoadCoupPtTyrAx 1.2

TestprocedureElrGroup 1.0

TestprocedureEscGroup 1.0

TestprocedureEtcGroup 1.0

TestprocedureNrscGroup 1.0

TestprocedureNrtcGroup 1.0

TestprocedureRdeGroup 1.3

TestprocedureType1Group 1.0



TestprocedureWhscGroup 1.0

TestprocedureWhtcGroup 1.0

TestprocedureWLTPCO2Group 1.3

TestprocedureWLTPEnergyGroup 1.3

TestprocedureWLTPFuelGroup 1.3

TestprocedureWLTPType1Group 1.3

TestprocElrSmokeValue 1.0

TestprocEscCO 1.0

TestprocEscCO2 1.2

TestprocEscExponentParticles 1.0

TestprocEscNOx 1.0

TestprocEscNumberOfParticles 1.0

TestprocEscParticulates 1.0


Version Date: 0126-1002-20192020





Remarks

TestprocEscStage 1.2

TestprocEscTHC 1.0

TestprocEtcCH4 1.0

TestprocEtcCO 1.0

TestprocEtcCO2 1.2

TestprocEtcExponentParticles 1.0

TestprocEtcHC_NOx 1.2

TestprocEtcNMHC 1.0

TestprocEtcNOx 1.0

TestprocEtcNumberOfParticles 1.0

TestprocEtcParticulates 1.0

TestprocEtcStage 1.2

TestprocEtcTHC 1.0

TestprocNrscCO 1.0

TestprocNrscCO2 1.2

TestprocNrscExponentParticles 1.0

TestprocNrscHC 1.0

TestprocNrscHC_NOx 1.2

TestprocNrscNMHC_Nox 1.0

TestprocNrscNOx 1.0

TestprocNrscNumberOfParticles 1.0

TestprocNrscParticulates 1.0

TestprocNrscStage 1.2

TestprocNrtcCH4 1.0

TestprocNrtcCO 1.0

TestprocNrtcCO2 1.2

TestprocNrtcExponentParticles 1.0

TestprocNrtcHC_NOx 1.2

TestprocNrtcHCWorkHotStNonReg 1.2

TestprocNrtcHotCycleCO2 1.2

TestprocNrtcHotCycleWork 1.2

TestprocNrtcNMHC 1.0

TestprocNrtcNMHC_Nox 1.0

TestprocNrtcNOx 1.0


Version Date: 0126-1002-20192020





Remarks

TestprocNrtcNumberOfParticles 1.0

TestprocNrtcParticulates 1.0

TestprocNrtcStage 1.2

TestprocNrtcTHC 1.0

TestprocRdeCompleteRdeExpPart 1.3

TestprocRdeCompleteRdeNOx 1.3

TestprocRdeCompleteRdeNrOfPart 1.3

TestprocRdeUrbanRdeExpPart 1.3

TestprocRdeUrbanRdeNOx 1.3

TestprocRdeUrbanRdeNrOfPart 1.3

TestprocType1CO 1.0

TestprocType1ExponentParticles 1.0

TestprocType1HC 1.0

TestprocType1HC_Nox 1.0

TestprocType1NMHC 1.0

TestprocType1Nox 1.0

TestprocType1NrOfParticles 1.0

TestprocType1Particulates 1.0

TestprocType2CO 1.0

TestprocType2COAtHighIdleSp 1.0

TestprocType2COAtNormIdleSp 1.0

TestprocType2EngSpHighIdleMax 1.0

TestprocType2EngSpHighIdleMin 1.0

TestprocType2EngSpNormalMax 1.0

TestprocType2EngSpNormalMin 1.0

TestprocType2HC 1.0

TestprocType2HCAtHighIdleSp 1.1

TestprocType2HCAtNormIdleSp 1.1

TestprocType5CO 1.2

TestprocType5HC_NOx 1.2

TestprocType5NMHC 1.2

TestprocType5NOx 1.2

TestprocType5Particulates 1.2

TestprocType5THC 1.2


Version Date: 0126-1002-20192020





Remarks

TestprocTypeVIICO2 1.1

TestprocTypeVIIFuelConsumption 1.1

TestprocTypeVIIGroup 1.1

TestprocWhscCH4 1.0

TestprocWhscCO 1.0

TestprocWhscCO2 1.2

TestprocWhscExponentParticles 1.0

TestprocWhscHC_NOx 1.2

TestprocWhscNH3 1.0

TestprocWhscNMHC 1.0

TestprocWhscNOx 1.0

TestprocWhscNumberOfParticles 1.0

TestprocWhscParticulates 1.0

TestprocWhscStage 1.2

TestprocWhscTHC 1.0

TestprocWhtcCH4 1.0

TestprocWhtcCO 1.0

TestprocWhtcCO2 1.2

TestprocWhtcExponentParticles 1.0

TestprocWhtcHC_NOx 1.2

TestprocWhtcHCWorkHostStNon-Reg

1.2

TestprocWhtcHotCycleCO2 1.2

TestprocWhtcHotCycleWork 1.2

TestprocWhtcNH3 1.0

TestprocWhtcNMHC 1.0

TestprocWhtcNOx 1.0

TestprocWhtcNumberOfParticles 1.0

TestprocWhtcParticulates 1.0

TestprocWhtcStage 1.2

TestprocWhtcTHC 1.0

TestprocWltpType1CO 1.3

TestprocWltpType1ExPart 1.3

TestprocWltpType1NH3 1.3


Version Date: 0126-1002-20192020





Remarks

TestprocWltpType1NMHC 1.3

TestprocWltpType1NOx 1.3

TestprocWltpType1NrOfPart 1.3

TestprocWltpType1Particulates 1.3

TestprocWltpType1THC 1.3

TestprocWltpType1THC_NOx 1.3

ThreePointLiftingMechanismCode 1.2

TotalCO2EmisSavDueEcoInnFuel 1.1

TotalCO2EmisSavingDueEcoInnov 1.0

TotalCO2EmisSavingDueEcoInnov 1.1 Forbidden R179 R179 R179

To-talCO2WLTPEmisSavDueEcoInnov

1.3

To-talCO2WLTPEmisSavDueEcoInnFuel

1.4

TPMStatVertLoadCouplPtTrTraSet 1.2

TrackContactGroundPressure 1.2

TrackLength 1.2

TrackOfAllOtherAxles 1.0 Mandatory for the vehicle categories M3, O1, O2, in case of complete vehicles for the non steered axle. Also see: AxleTrack and TrackOfEachSteeredAxle. This entry has to be added per axlenumber. The value cannot exceed the value for Width.

R051,R209 R209 R209

TrackOfEachSteeredAxle 1.0 Mandatory for the vehicle categories M3, O1, O2, in case of complete vehicles for the steered axle. Also see: AxleTrack and TrackOfAllOtherAxles. The value cannot exceed the value for Width.

R052,R209 R209 R209

TrackRollerGroup 1.2

TrackRollerMaximumload 1.2

TrackRollerNumber 1.2

TrackRollerTable 1.2


Version Date: 0126-1002-20192020





Remarks

TrackSetGroup 1.2

TrackSetNumber 1.2

TrackSetTable 1.2

TrackTrainCouplPtGroup 1.2

TrackTrainCouplPtTable 1.2

TrackTrainGroup 1.2

TrackTrainSetGroup 1.2

TrackTrainSetTable 1.2

TrackWidth 1.2

TrailerBrakeConnectionsCode 1.0 No rule for the remark: In case of an incomplete, complete or completed vehicle, equiped with a coupling and trailer brake connection state connection code

In case of an incomplete, complete or completed vehicle, which can be equiped with a coupling and is equiped with a trailer brake connection state connection code

In case of an incomplete, complete or completed vehicle and the vehicle can not be equiped with a trailer brake connection skip this entry in the xml

TrailerBrakeConnectTechCode 1.2

TrailerBrakeConnectTypeCode 1.2

TrailerBrakeConnectTypeGroup 1.2

TrailerBrakeConnectTypeTable 1.2

TrailerBrakeGroup 1.0

TrailerBrakeTable 1.0

TwentyFourGHzRadarInd 1.1

TwinWheelsAxleInd 1.0

Type 1.0 This field is mandatory for all vehicle cate-gories with a type approval.

R102 R102 R102

TypeApprovalDateOfIssue 1.0 The field is mandatory for all vehicle cate-gories with a type approval.

R102,R401, R102,R401 R102,R401 No rule for the remark This is the date the type approval (00-extension) has been ap-proved by the type approval authority. For extensions (01+ extensions) the date of issue for the extension has to be used (see


Version Date: 0126-1002-20192020





Remarks

also : 0.10 of the COC 2007/46).

TypeApprovalNumber 1.0 This field is mandatory if the Type Approv-alTypeCode contains the value: EC, KS, NKS or NAT.

R102 R102 R102

TypeApprovalTypeCode 1.0 The field is mandatory for all vehicle cate-gories.

R001 R001 R001

TypeApprTranspDangerGoodsClass 1.0

TypeApprTranspDangerGoodsGroup 1.0

TypeApprTranspDangerGoodsInd 1.0

TypeApprTranspDangerGoodsTable 1.0

TypeOfBrakingVehicleCode 1.2

TypeOfChassisArticulatedInd 1.2

TypeOfChassisBackboneInd 1.2

TypeOfChassisCentralTubeInd 1.2

TypeOfChassisChWithSideMembInd 1.2

TypeOfChassisGroup 1.2

TypeOfChassisLadderInd 1.2

TypeOfChassisOther 1.2

TypeOfChassisOtherInd 1.2

TypeOfCouplingDeviceFitted 1.0

TypeOfMaterialOnTrackShoesCode 1.2

TypeOfRollOverHoopCode 1.0

TypeOfTyre 1.0

TypeTrailerCode 1.2

TyreAxleCombinationGroup 1.3

TyreAxleCombinationNumber 1.3

TyreAxleCombinationTable 1.3

TyreAxleCouplPtGroup 1.2

TyreAxleCouplPtTable 1.2

TyreAxleGroup 1.0

TyreAxlePressureGroup 1.1

TyreAxlePressureTable 1.1

TyreAxleTable 1.0

TyreAxleTrack 1.3


Version Date: 0126-1002-20192020





Remarks

TyreAxleTrackMaximum 1.3

TyreAxleTrackMinimum 1.3

TyreCategoryCode 1.4

TyreClassificationCode 1.2

TyreCombinationNumber 1.3

TyreGroup 1.0

TyreLoadRatingTyre 1.2

TyreMaxSpeedIndicator 1.2

TyreNumber 1.3

TyrePlyRatingNumber 1.2

TyreRemarks 1.2

TyreSize 1.0

TyreSpecification 1.0

TyreTable 1.0

TyreTubeTypeCode 1.1

UnladenMassOfTheVehicle 1.0 For the vehicle categories <> Lx If applicable the value must be less then the values for : MassOfTheVehicleInRunningOrder TechnPermMaxLadenMass. For the vehicle categories = Lx If applicable the value must be less then or equal to the values for : MassOfTheVehicleInRunningOrder TechnPermMaxLadenMass.

R201,R219, R228

R201,R219, R228

R201,R219, R228

UnladenMassVehRunningOrderMax 1.0

UnladenMassVehRunningOrderMin 1.0 R302,R303 R302,R303 R302,R303 Rule 302,303 enforces proper use of minimum-maximum items

UrbanConditionsCO2 1.0

1.3 UrbanConditionsCO2 is relevant for com-plete vehicles for the vehicle categories M1,M2,N1,N2. Mandatory in case of: ClassOfHybridVehicleCode is NOVC-HEV

R021, R186, R191 ,R210

R210 R210


Version Date: 0126-1002-20192020





Remarks

Or All ElectricEngineIndicators in the message are N. Except for:

Heavy duty emission tested vehi-cles where NrBaseRegulActLas-tAmendEngines is present. MassOfTheVehicleInRun-ningOrder >2585 kg


UrbanConditionsFuelConsumption 1.0

1.3 UrbanConditionsFuelConsumption is relevant for complete vehicles for the vehicle categories M1,M2,N1,N2. Mandatory in case of: ClassOfHybridVehicleCode is NOVC-HEV Or All ElectricEngineIndicators in the message are N. Except for:

Heavy duty emission tested vehi-cles where NrBaseRegulActLas-tAmendEngines is present.

R021, R186, R191 ,R210

R210 R210


Version Date: 0126-1002-20192020





Remarks

MassOfTheVehicleInRun-ningOrder >2585 kg


Variant 1.0 This field is mandatory if the TypeApprov-alTypeCode contains the value: EC, KS, NKS.

For the L category if a variant is not appli-cable use the abbreviation : N/A.

R103 R103 R103

VehicleCategoryCode 1.0 This field is mandatory for all vehicle cate-gories if the TypeApprovalTypeCode contains the value: EC, KS, NKS.

R103

VehicleClassGroup 1.0

VehicleClassTable 1.0 R012

VehicleDefinitionCode 1.3

VehicleFittedWithEcoInnovInd 1.0

VehicleIdentificationNumber 1.0 This field is mandatory for all vehicle cate-gories.

R001 R001 R001

VehicleWithMachineryMountedInd 1.2

Version 1.0 This field is mandatory if the TypeApprov-alTypeCode contains the value: EC, KS, NKS.

For the L category if a version is not appli-

R103 R103 R103


Version Date: 0126-1002-20192020





Remarks

cable use the abbreviation : N/A.

VersionCoc 1.0 This field is mandatory for all vehicle cate-gories with a type approval if the TypeAp-provalTypeCode contains the value: EC, KS, NKS and NAT. .

R102,R184 R102,R184 R102,R184 No rule for the remarks For the first COC this entry is “1”. For the next versions (corrections) of the same COC this entry contains “2” etc.

Please note that this field has a relation with the COC versions and not with multistage vehicles.

VersionDateIVI 1.0 This is the sending date of the digital information for COC or IAC, if there is a revision the date and time must be updated.

R001,R401 R001,R401 R001,R401

VersionNumberXsd 1.1 Mandatory as of v1.1 R001 R001 R001

VocationalVehicleInd 1.5

WeightedCombinedCO2 1.0 This field has to be used for the off vehicle charging vehicles (see also: OffVehi-cleChargingIndicator or OffVehicleCharg-ingVehInd OffVehicleChargingIndicator or OffVehi-cleChargingVehInd = N then the use of this field is forbidden.

R027, R178,

WeightedCombinedCO2 1.3 WeightedCombinedCO2 is relevant for complete vehicles for the vehicle categories M1,M2,N1,N2. Mandatory in case of: ClassOfHybridVehicleCode is OVC-HEV Except for:

Heavy duty emission tested vehi-cles where NrBaseRegulActLas-tAmendEngines is present. M1 with bBodywork type SA, SC and SD (CodeForBodywork-SpecPurpVeh or CodeForBod-

RR024, R026, R028, R031


Version Date: 0126-1002-20192020





Remarks

yWork). Not allowed: Pure electric vehicles where no FuelCode is present or ClassOfHybridVehicleCode is NOVC-HEV. or All ElectricEngineIndicators in the message are N. Note In case of several EngineGroups where ElectricEngineIndicator can be stated “Y” or “N”, WeightedCombinedCO2 is allowed for the EngineGroup where the ElectricEn-gineIndicators is stated “N”. WeightedCombinedCO2 and CombinedCO2 can’t both have a value The value “0” is not permitted.

WeightedCombinedFuelCons 1.0 OffVehicleChargingIndicator or OffVehi-cleChargingVehInd = N then the use of this field is forbidden.

R178

Wheelbase 1.0 - R307 R307 R307 No rule for the remarks This is the total wheelbase: in case of the vehicle categories M,N,L,T and C this is the distance between the first and rear axle of the vehicle; in case drawbar trailer of the vehicle categories O, R and S this is the distance between centre of the first axle and the rear axle; in case semi trailers,centre axle and rigid drawbar trailers of the vehicle categories O, R and S this is the distance between centre


Version Date: 0126-1002-20192020





Remarks

of the coupling device and the rear axle; See also: DistanceCouplPointFirstAxle and AxleSpacing. Addition of rule 307 to enforce proper use of a single value or range values.

WheelbaseGroundRatio 1.1

WheelbaseMaximum 1.0

WheelbaseMinimum 1.0 R302,R303 R302,R303 R302,R303 Rule 302,303 enforces proper use of minimum-maximum items

WheelbaseSideCar 1.1 - -

Width 1.0 Must be less than (and equal to?) 2550 mm if VehicleCategoryCode IN (‘N’,’O’) AND ANY (ALL?) NumberForBodyWork <> 4,5 AND ExceedingDimensionsIndicator <> ‘Y’ Must be less than (and equal to?) 2600 mm if VehicleCategoryCode IN (‘N’,’O’) AND ANY (ALL?) NumberForBodyWork = 4,5 AND ExceedingDimensionsIndicator <> ‘Y’ Must be less than (and equal to?) 2550 mm if VehicleCategoryCode = ‘Mx’ AND ExceedingDimensionsIndicator <> ‘Y’ Width or WidthMini-mum/WidthMaximum are mandatory in case of complete vehicles.

R046,R224,R225,R226,R307


WidthMaximum 1.0 R224,R225,R226

WidthMinimum 1.0 R302,R303 R302,R303 R302,R303 Rule 302,303 enforces proper use of minimum-maximum items

WLTPCombinedCO2 1.3 WLTPCombinedCO2 is relevantmandatory for complete vehicles for the vehicle cate-gories M1,M2,N1,N2 where.

R191R024,R032,, R033, R210

R210 R210


Version Date: 0126-1002-20192020





Remarks

If EmisTestMassWLTP has a value thenand : Mandatory in case of: ClassOfHybridVehicleCode is NOVC-HEV or Or All ElectricEngineIndicators in the message are N.

Not allowed: Pure electric vehicles where no FuelCode is present or ClassOfHybridVehicleCode is OVC-HEV, OVC-FCHV, NOVC-FCHV WLTPCombinedCO2 and WLT-PWeightedCombinedCO2 can’t both have a value The value “0” is not permitted.

WLTPCombinedFuelCons 1.3

WLTPElecEnergyConsPureElectric 1.3

WLTPElectEnergyConsExternCharg 1.3 R062

WLTPElectricRangeCityExtCharg 1.3

WLTPElectricRangeCityPureElec 1.3

WLTPElectricRangeExternCharg 1.3

WLTPElectricRangePureElectric 1.3

WLTPEmissionTestParamGroup 1.3

WLTPExtraHighCO2 1.3

WLTPExtraHighFuelConsumption 1.3


Version Date: 0126-1002-20192020





Remarks

WLTPHighCO2 1.3

WLTPHighFuelConsumption 1.3

WLTPLowCO2 1.3

WLTPLowFuelConsumption 1.3

WLTPMediumCO2 1.3

WLTPMediumFuelConsumption 1.3

WLTPTestTyreRimVehInd 1.3

WLTPWeightedCombinedCO2

1.3 WLTPWeightedCombinedCO2 is relevant for complete vehicles for the vehicle cate-gories M1,M2,N1,N2. If EmisTestMassWLTP has a value then: Mandatory in case of: ClassOfHybridVehicleCode is OVC-HEV Not allowed: Pure electric vehicles where no FuelCode is present or ClassOfHybridVehicleCode is NOVC-HEV or All ElectricEngineIndicators in the message are N. Note In case of several EngineGroups where ElectricEngineIndicator can be stated “Y” or “N”, WLTPWeightedCombinedCO2 is allowed for the EngineGroup where the ElectricEngineIndicators is stated “N”.

R210 R032, R024, R034, R210

R210 R210 Note that R032 also applies


Version Date: 0126-1002-20192020





Remarks

WLTPCombinedCO2 and WLTPWeightedCombinedCO2 can’t both have a value The value “0” is not permitted.

WLTPWeightedCombinedFuelCons

1.3 R210

WorkingPrincipleCode 1.0

ZeroEmisVehInd 1.5

5.4 Rules

Rule num-ber

Version Description Error message

Variables to include in message

R001 1.0 Mandatory E001 <checked item>

R002 1.0 Mandatory if VehicleCategoryCode = ‘Mx’ E001 <checked item>

R003 1.0 Mandatory if VehicleCategoryCode = ‘Nx’ E001 <checked item>

R004 1.0 Mandatory if VehicleCategoryCode = ‘Ox’ E001 <checked item>

R005 1.0 Mandatory if VehicleCategoryCode = ‘Lx’ E001 <checked item>

R006 1.0 Mandatory if VehicleCategoryCode IN (‘M1'x’,‘N1x’) E001 <checked item>

R007 1.0 Mandatory if VehicleCategoryCode IN (‘M2x’,’M3x’) E001 <checked item>

R008 1.0 Mandatory if VehicleCategoryCode = ‘Rx’ E001 <checked item>

R009 1.0 Mandatory if VehicleCategoryCode = ‘Sx’ E001 <checked item>

R010 1.0 Mandatory if VehicleCategoryCode IN (‘Tx’, ‘Cx’) E001 <checked item>

R011 1.0 Mandatory if VehicleCategoryCode IN (‘M2x’, ‘M3x’, ‘Nx’) AND MechanicalCouplingTable is present E001 <checked item>

R012 1.0 Mandatory if VehicleCategoryCode IN (M2x, M3x) AND ANY CodeForBodywork is IN (CA,CB,CC,CD,CE,CF,CG,CH,CI,CJ,CK,CL,CM,CO,CP,CQ,CR,CS,CT,CU,CV,CW)

E001 <checked item>

R013 1.0 At least one of the items CouplingCharacteristicValueD, CouplingCharacteristicValueDC. CouplingCharacteris-ticValueS, CouplingCharacteristicValueU, CouplingCharacteristicValueVmust be present if VehicleCategoryCode IN (‘M2x’, ‘M3x’, ‘Nx’, ‘Ox’)

E042


Version Date: 0126-1002-20192020


Rule num-ber

Version Description Error message

Variables to include in message

R014 1.0 Mandatory if VehicleCategoryCode IN (‘M2x’, ‘M3x’, ‘N2x’, ‘N3x’), AND PoweredAxleInd = ‘Y’ E001 <checked item>

R015 1.0 Mandatory if VehicleCategoryCode IN (‘M2x’, ‘M3x’) AND FuelCode is present E001 <checked item>

R016 1.3 Mandatory if VehicleCategoryCode IN (‘M3x’, ‘N3x’) AND HybridIndicator is absent E001

R017 1.0 Mandatory if VehicleCategoryCode =’Mx’ AND FuelCode is present E001 <checked item>

R018 1.0 Mandatory if VehicleCategoryCode = ‘Nx’ AND FuelCode is present E001 <checked item>

R019 1.0 Mandatory if VehicleCategoryCode = ‘Lx’ AND FuelCode is present E001 <checked item>

R020 1.0 Mandatory if VehicleCategoryCode IN (‘N2x’, ‘N3x’) E001 <checked item>

R021 1.0 Mandatory if VehicleCategoryCode = in (‘M1x’, ‘N1x’) AND FuelCode is present AND NrBaseRegulActLas-tAmendEngines is absent AND ALL CodeForBodyworkSpecPurpVeh <> (SA, SC, SD) AND ALL CodeForBodyWork <> (SA, SC, SD) AND OffVehicleChargingIndicator =<> ‘YN’’

E001 <checked item>

1.2 Mandatory if VehicleCategoryCode = in (‘M1x’, ‘N1x’) AND FuelCode is present AND NrBaseRegulActLas-tAmendEngines is absent AND ALL CodeForBodyworkSpecPurpVeh <> (SA, SC, SD) AND ALL CodeForBodyWork <> (SA, SC, SD) AND either OffVehicleChargingIndicator<>= ‘NY’’ OR AND OffVehicleChargingVehInd = <> ‘NY’

E001 <checked item>

1.3 Mandatory if VehicleCategoryCode IN (‘M1x’, ‘M2x’, ‘N1x’, ‘N2x’) AND FuelCode is present AND NrBaseRegu-lActLastAmendEngines is absent AND MassOfTheVehicleInRun-ningOrder <= 2585 kg ALL CodeForBodywork-SpecPurpVeh <> (SA, SC, SD) AND ALL CodeForBodyWork <> (SA, SC, SD) AND OffVehicleChargingIndicator <> ‘Y’’ AND OffVehicleChargingVehInd <> ‘Y’ AND ClassOfHybridVehicleCode NOT IN (‘OVC-HEV’,’OVC-FCHV’, ‘NOVC-FCHV’)

E001 <checked item>

R022 1.0 CancelledMandatory if VehicleCategoryCode = ‘N1x’ AND FuelCode is present AND NrBaseRegulActLastAmendEn-gines is absent AND OffVehicleChargingIndicator = ‘N’

E001 <checked item>

1.2 Cancelled Mandatory if VehicleCategoryCode = ‘N1x’ AND FuelCode is present AND NrBaseRegulActLastAmendEn-gines is absent AND either OffVehicleChargingIndicator = <> ‘N’ Y’ OR AND OffVehicleChargingVehInd = <> ‘N’Y’

E001 <checked item>

1.3 Cancelled Mandatory if VehicleCategoryCode IN (‘N1x’, ‘N2x’) AND FuelCode is present AND NrBaseRegulActLas-tAmendEngines is absent AND OffVehicleChargingIndicator <> ‘Y’’ AND OffVehicleChargingVehInd <> ‘Y’ AND ClassOfHybridVehicleCode NOT IN (‘OVC-HEV’,’OVC-FCHV’)

E001 <checked item>

R023 1.0 A minimum of one value must be present in the table when VehicleCategoryCode IN (‘Mx‘,‘Nx‘,‘Lx‘,‘Tx‘,‘Cx‘) and EngineCapacity is present

E009 <checked item>,one,<null>

R024 1.3 Forbidden if all ElectricEngineIndicators in the EngineTable are ‘N’

R025 1.0 At least one value should be present in the table E009 <checked item>, one, <null>


Version Date: 0126-1002-20192020


R026 1.3 Mandatory where FuelCode is present in the FuelGroup, andMandatory if VehicleCategoryCode in

(M1x,M2x,N1x,N2x) AND ClassOfHybridVehicleCode = ‘OVC-HEV’ AND NrBaseRegulActLastAmendEngines is absent AND CodeForBodyworkSpecPurpVeh NOT IN (‘SA’,’SC’,‘SD’).

R027 1.0 Mandatory if VehicleCategoryCode = ‘N1x’ AND FuelCode is present AND NrBaseRegulActLastAmendEngines is absent AND OffVehicleChargingIndicator = 'Y'

E001 <checked item>

1.2 Mandatory if VehicleCategoryCode = ‘N1x’ AND FuelCode is present AND NrBaseRegulActLastAmendEngines is absent AND either OffVehicleChargingIndicator = 'Y' OR OffVehicleChargingVehInd = ‘Y’

E001 <checked item>

1.31.3 CancelledMandatory if VehicleCategoryCode = ‘N1x’ AND FuelCode is present AND NrBaseRegulActLastAmendEn-gines is absent AND either OffVehicleChargingIndicator = ‘Y’ OR OffVehicleChargingVehInd = ‘Y’ OR ClassOfHy-bridVehicleCode IN (‘OVC-HEV’,’OVC-FCHV’)

R028 1.3 Forbidden if ClassOfHybridVehicleCode = ‘NOVC-HEV’ E005 <checked item>

R029 1.0 Mandatory if VehicleCategoryCode IN (‘Mx’ ,’Nx’, ‘Lx’) AND ANY FuelCode is present AND NOT IN (50,90,91) E001 <checked item>

R030 1.0 At least one value should be present in the table if MaximumSpeedNonPropulsion is absent. E003 <checked item>, MaximumSpeedNonPro-pulsion

R031 1.3 Forbidden if CombinedCo2 is present.Not both fields WeightedCombinedCo2 OR CombinedCo2 can have a value. E003

R032 1.3 Forbidden if WLTPWeightedCombinedCo2 is present.Not both fields WLTPCombinedCo2 OR WLTPWeightedCom-binedCo2 can have a value.

E003

R033 1.3 Mandatory if VehicleCategoryCode =(M1x,M2x,N1x,N2x) AND ClassOfHybridVehicleCode = ‘NOVC-HEV’ AND EmisTestMassWLTP has a value.

E001

R034 1.3 Mandatory if VehicleCategoryCode =(M1x,M2x,N1x,N2x) AND ClassOfHybridVehicleCode = ‘OVC-HEV’ AND EmisTestMassWLTP has a value.

E001

R035 1.3 At least Ttwo FuelGroups are mandatory if a value for ClassOfHybridVehicleCode is present. E034

R036 1.3 At least Ttwo FuelGroups are mandatory if HybridVehIndicator has the value “Y”. E034

R037 1.3 Forbidden in at least one fuelgroup if HybridVehIndicator has the value “Y” OR a value for ClassOfHybridVehicleCode is present.

E005 <checked item>

R040 1.0 Mandatory if HeightMinimum is absent AND HeightMaximum is absent AND VehicleCategoryCode NOT IN (‘N2x’, ‘N3x’)

E002 <checked item>, HeightMinimum, HeightMaximum

R041 1.0 Mandatory if AxleSpacingMinimum is absent AND AxleSpacingMaximum is absent AND VehicleCategoryCode IN (‘Mx’, ‘Nx’) AND number of AxleGroups > 2 AND not in the group with the highest AxleNumber

E002 <checked item>, AxleSpacingMinimum, AxleSpacingMaximum

R042 1.0 Mandatory if AxleSpacingMinimum is absent AND AxleSpacingMaximum is absent AND VehicleCategoryCode IN (‘Ox’, ‘Rx’, ‘Sx’ ) AND number of AxleGroups > 1 AND not in the group with the highest AxleNumber

E002 <checked item>, AxleSpacingMinimum, AxleSpacingMaximum

R043 1.0 Mandatory if DistanceCouplPointFirstAxleMax is absent AND DistanceCouplPointFirstAxleMin is absent AND Vehi-cleCategoryCode = ‘Ox’ AND ANY CodeForBodywork IN (‘DA’, ‘DC’, ‘DE’)

E002 <checked item>, DistanceCouplPoint-FirstAxleMin, DistanceCouplPoint-FirstAxleMax

R044 1.0 Mandatory if AxleTrackMinimum is absent AND AxleTrackMaximum is absent AND VehicleCategory IN (‘M1x’, ‘M2x’, ‘N1x’ )

E002

<checked item>, AxleTrackMinimum, AxleTrackMaximum

R045 1.0 Mandatory if VehicleCategoryCode IN (‘Mx’, ‘Nx’, ‘Ox’) AND CodeForBodyworkSpecPurpVeh is absent. E003 <checked item>, CodeForBodywork-SpecPurpVeh

R046 1.0 Mandatory if corresponding minimum and maximum are absent. E002 <checked item>, <corresponding mini-mum>, <corresponding maximum>

R047 1.0 Mandatory if DistCentreCouplDevRearVehMin is absent AND DistCentreCouplDevRearVehMax is absent if Vehi-cleCategory = ‘Ox’

E002 <checked item>, DistCentre-CouplDevRearVehMin, DistCentre-


Version Date: 0126-1002-20192020


CouplDevRearVehMax

R048 1.0 Mandatory if FifthWheelLeadMinimum is absent AND FifthWheelLeadMaximum is absent AND VehicleCategory = ‘Nx’ AND ANY CodeForBodywork = ‘BC’

E002 <checked item>, FifthWheelLeadMini-mum, FifthWheelLeadMaximum

R049 1.0 Mandatory if RearOverhangMinimum is absent AND RearOverhangMaximum is absent AND VehicleCategory IN (‘M2x’, ‘M3x’, ‘N2x’, ‘N3x’, ‘Ox’ )

E002 <checked item>, RearOverhangMinimum, RearOverhangMaximum

R051 1.0 Mandatory if VehicleCategoryCode IN (‘M3x’, ‘O1’, ‘O2’) AND SteeredAxleInd <> ‘Y’ E001 <checked item>

R052 1.0 Mandatory if VehicleCategoryCode IN (‘M3x’, ‘O1’, ‘O2’) AND SteeredAxleInd = ‘Y’ E001 <checked item>

R053 1.0 Mandatory if DistFrontVehCentreCouplDevMin is absent AND DistFrontVehCentreCouplDevMax is absent AND VehicleCategory = ‘Nx’ AND ANY CodeForBodywork = ‘BC’OR "BD"

E002 <checked item>, DistFrontVehCentre-CouplDevMin, DistFrontVehCentre-CouplDevMax

R060 1.0 Mandatory if DistanceCouplPointFirstAxleMin is absent AND DistanceCouplPointFirstAxleMax is absent AND Vehi-cleCategory = ‘Ox’ AND ANY CodeForBodyworkSpecPurpVeh = ‘SE’


R061 1.0 Mandatory if DistanceCouplPointFirstAxleMin is absent AND DistanceCouplPointFirstAxleMax is absent AND Vehi-cleCategory = ‘Ox’ AND ANY CodeForBosywork = ‘SE’


R062 1.3 Mandatory where FuelCode is not present in the FuelGroup, and VehicleCategoryCode IN (‘M1x’, ‘M2x’, ‘N1x’, ‘N2x’) AND NrBaseRegulActLastAmendMotVeh is present AND (OffVehicleChargingIndicator = ‘Y’ OR OffVehi-cleChargingVehInd = ‘Y’ OR ClassOfHybridVehicleCode IN (OVC-HEV, OVC-FCHV)) AND WltpElectricRang-eExternCharg is not present

E001 <checked item>

R086 1.0 For 1.0 Mandatory if ElectricEngineIndicator <> ‘Y’ and VehicleCategoryCode <> 'Ox' For 1.1 Mandatory if ElectricEngineIndicator <> ‘Y’

E001 <checked item>

1.1 Mandatory if ElectricEngineIndicator <> ‘Y’

R101 1.0 Mandatory if TypeApprovalTypeCode =’IND’ E001 <checked item>

R102 1.0 Mandatory if TypeApprovalTypeCode IN (NAT, NKS, KS, EC). E001 <checked item>

R103 1.0 Mandatory if TypeApprovalTypeCode IN (NKS, KS, EC). E001 <checked item>

R104 1.0 Mandatory if TypeApprovalTypeCode IN (NKS, KS). E001 <checked item>

R111 1.0 Is Present EOR NrBaseRegulActLastAmendMotVeh is present if VehicleCategoryCode NOT IN (‘Ox’, ‘Rx’, ‘Sx’) AND ElectricEngineIndicator <> ‘Y’

E003 <checked item>, NrBaseRegulActLas-tAmendMotVeh

R112 1.0 Is Present equals Mandatory if OdometerReading is present E004 <checked item>, OdometerReading

R174 1.3 Forbidden if HybridVehIndicator is present. E005 <checked item>

R175 1.0 Forbidden if ElectricEngineIndicator = ‘N’ E005 <checked item>

R176 1.0 Forbidden in Group with highest number E005 <checked item>

R177 1.0 Forbidden if OffVehicleChargingIndicator = ‘Y’ E005 <checked item>

1.2 Forbidden if OffVehicleChargingIndicator = ‘Y’ OR OffVehicleChargingVehInd = ‘Y’ E005 <checked item>

1.31.3 CancelledForbidden if OffVehicleChargingIndicator = ‘Y’ OR OffVehicleChargingVehInd = ‘Y’ OR ClassOfHy-bridVehicleCode in (‘OVC-HEV’.’OVC-FCHV’)

E005 <checked item>

R178 1.0 Forbidden if OffVehicleChargingIndicator <> ‘Y’ E005 <checked item>

1.2 Forbidden if OffVehicleChargingIndicator <> ‘Y’ AND OffVehicleChargingVehInd <> ‘Y’ E005 <checked item>

1.3 Forbidden if OffVehicleChargingIndicator <> ‘Y’ AND OffVehicleChargingVehInd <> ‘Y’ AND ClassOfHybridVehi-cleCode NOT in (‘OVC-HEV’.’OVC-FCHV’)


Version Date: 0126-1002-20192020


R179 1.0 Forbidden E005 <checked item>

R180 1.0 Forbidden if PoweredAxleInd <> ‘Y’ E005 <checked item>

R181 1.0 Forbidden if VehicleCategoryCode = ‘Ox’ E005 <checked item>

R182 1.2 Forbidden if OffVehicleChargingVehInd is present. E005 <checked item>

1.3 Forbidden if OffVehicleChargingVehInd is present OR ClassOfHybridVehicleCode is present

R183 1.0 Forbidden if TypeApprovalTypeCode IN (‘NAT’, ‘NKS’, ‘KS, ‘EC’). E005 <checked item>

R184 1.0 Forbidden if TypeApprovalTypeCode=‘IND’ E005 <checked item>

R185 1.0 Forbidden if ElectricEngineIndicator <> ‘Y’ AND HybridIndicator <> ‘Y’ E005 <checked item>

1.3 Forbidden if ElectricEngineIndicator <> ‘Y’ AND HybridIndicator <> ‘Y’ AND HybridVehIndicator <> ‘Y’ AND ClassOfHybridVehicleCode NOT IN (‘OVC-HEV’.’OVC-FCHV’)

E005 <checked item>

R186 1.0 Forbidden if ElectricEngineIndicator = ‘Y’ AND HybridIndicator <> ‘Y’ E005 <checked item>

R186 1.3 Forbidden if ElectricEngineIndicator = ‘Y’ AND HybridIndicator <> ‘Y’ AND HybridVehIndicator <> ‘Y’ AND ClassOfHybridVehicleCode is not present

E005 <checked item>

R187 1.0 Forbidden if VehicleCategoryCode NOT IN (‘Tx’, ‘Cx’, ‘Rx’, ‘Sx’) E005 <checked item>

R188 1.0 Forbidden if VehicleCategoryCode NOT IN (‘Ox’, ‘Rx’, ‘Sx’) E005 <checked item>

R189 1.0 Forbidden if VehicleCategoryCode NOT IN (‘Mx’, ‘Nx’, ‘Lx’, ‘Tx’, ‘Cx’) E005 <checked item>

R190 1.0 Forbidden if VehicleCategoryCode NOT IN (‘M2x’, ‘M3x’) E005 <checked item>

R191 1.0 Forbidden if VehicleCategoryCode = ‘'M1x’ AND FuelCode is present AND OffVehicleChargingIndicator = ‘Y’ E005 <checked item>

1.2 Forbidden if VehicleCategoryCode = ‘'M1x’ AND FuelCode is present AND either OffVehicleChargingIndicator = ‘Y’ OR OffVehicleChargingVehInd = ‘Y’

E005 <checked item>

1.3 Forbidden if VehicleCategoryCode IN (‘M1x’, ‘M2x’, ‘N1x’, ‘N2x’) = ‘'M1x’ AND FuelCode is present AND either OffVehicleChargingIndicator = ‘Y’ OR OffVehicleChargingVehInd = ‘Y’ OR ClassOfHybridVehicleCode in (‘OVC-HEV’.’OVC-FCHV’)

E005 <checked item>

R201 1.0 < TechnPermMaxLadenMass, if both present E023 <checked item>, TechnPer-mMaxLadenMass

R202 1.0 < TechnPermMaxMassCombination, if both present AND TechnPermMaxMassCombination <> 0 E023 <checked item>, TechnPermMax-MasCombination

R203 1.0 < MaxPermLadenMassInternational, if both present E023 <checked item>, MaxPermLadenMassIn-ternational

R204 1.0 <= MaxPermMassCombinationInt, if both present AND MaxPermMassCombinationInt <> 0 E023 <checked item>, MaxPermMassCombina-tionInt

R205 1.0 < MaxPermLadenMassNational, if both present E023 <checked item>, MaxPermLadenMassNa-tional

R206 1.0 <= MaxPermMassCombinationNational, if both present AND MaxPermMassCombinationNational <> 0 E023 <checked item>, MaxPermMassCombina-tionNational

R207 1.0 <= TechnPermMaxLadenMass, if both present E024 <checked item>, TechPermMaxLadenMass

R208 1.0 <= TechnPermMaxMassCombination, if both present AND TechnPermMaxMassCombination <> 0 E024 <checked item>, TechPermMaxMassCom-bination

R209 1.0 <= Width, if both present E024 <checked item>, Width

R210 1.0 Cannot be 0 E033 <checked item>, 0

R211 1.0 <= TechPermMassAxleGroup, if both present E024 <checked item>, TechPermMassAxle-Group

R213 1.0 <= TechnicallyPermMassAxle, if both present E024 <checked item>, TechnicallyPermMassAxle


Version Date: 0126-1002-20192020


R214 1.0 Must be > 1 if VehicleCategoryCode IN (‘Mx’, ‘Nx’, ‘Lx’). E029 <checked item>, 1

R215 1.0 Must be > 0 if VehicleCategoryCode IN (‘Ox’, ‘Tx’, ‘Cx’, ‘Sx’, ‘Rx’). E029 <checked item>, 0

R216 1.0 Must be equal to NumberOfAxles * 2 + NumberOfAxlesWithTwinWheels * 2, if both present E022 <checked item>

R217 1.0 <= 3500 If VehicleCategoryCode IN (‘Mx’, ‘N1x’) E028 <checked item>, 3500

R218 1.0 <= 750 If VehicleCategoryCode IN (‘M1x’, ‘N1x’) E028 <checked item>, 750

R219 1.0 < MassOfTheVehicleInRunningOrder, if VehicleCategoryCode <> ‘Lx’, if both present E023 <checked item>, MassOfTheVehicleInRun-ningOrder

R220 1.0 <= 4000 If VehicldeCategoryCode IN (‘Mx’, ‘Nx’, ‘Ox’) AND ExceedingDimensionsIndicator <> 'Y' E024 <checked item>, 4000

R221 1.0 <= 12000 If VehicleCategoryCode IN (‘M1x’, ‘Nx’) AND ExceedingDimensionsIndicator <> ‘Y’ E024 <checked item>, 12000

R222 1.0 <= 18750 If VehicleCategoryCode IN (‘M2x’, ‘M3x’) AND ExceedingDimensionsIndicator <> ‘Y’ E024 <checked item>,18750

R223 1.0 <= 12000 If VehicleCategoryCode = ‘Ox’ AND ANY CodeForBodywork IN ('DB', 'DC', 'DE', 'SG', 'SE') AND Ex-ceedingDimensionsIndicator <> 'Y'

E024 <checked item>,12000

R224 1.0 <= 2550 If VehicleCategoryCode IN (‘Nx’, ‘Ox’) AND ALL NumberForBodywork NOT IN (4, 5) AND Exceeding-DimensionsIndicator <> ‘Y’


R225 1.0 <= 2600 If VehicleCategoryCode IN (‘Nx', ‘Ox') AND ANY NumberForBodywork IN (4, 5) AND ExceedingDimen-sionsIndicator <> ‘Y'


R226 1.0 <= 2550 If VehicleCategoryCode = ‘Mx’ AND ExceedingDimensionsIndicator <> ‘Y’ E024 <checked item>,2550

R227 1.0 <= 12000 If VehicleCategoryCode = ‘Ox’ AND ExceedingDimensionsIndicator <> ‘Y’ E024 <checked item>,12000

R228 1.0 <= MassOfTheVehicleInRunningOrder, if VehicleCategoryCode = ‘Lx’, if both present E023 <checked item>, MassOfTheVehicleInRun-ningOrder

R301 1.0 The groups of the table should be numbered 1..N E040 <checked item>

R302 1.0 Is present equals corresponding maximum is present e.g. If AxleSpacingMinimum is present, AxleSpacingMaximum must also be present, and vice versa.

E004 <checked item>, <corresponding maxi-mum>

R303 1.0 < corresponding maximum, e.g. AxleSpacingMinimum < AxleSpacingMaximum

E023 <checked item>, <corresponding maxi-mum>

R304 1.0 <> CodeForBodyworkSpecPurpVeh, if both present E021 <checked item>, CodeForBodywork-SpecPurpVeh

R305 1.0 <> SecondaryColourCode, if both present E021 <checked item>, SecondaryColourCode

R306 1.0 <> 'T' If TypeApprovalTypeCode IN ('NAT', 'NKS', 'KS', 'EC') E032 <checked item>, T

R307 1.0 Forbidden when corresponding minimum is present E005 <checked item>

R401 1.0 Cannot be in the future E031 <checked item>

5.5 Error messages

The values to include for the variables are listed in Chapter 5.2.

MessageCode MessageDesc

E001 {0} should be present.

E002 {0} (or Minimum and Maximum equivalent) should be present.

E003 Either {0} or {1} should be present.

E004 {0} and {1} should either both be present, or both be absent.


Version Date: 0126-1002-20192020


E005 {0} should be absent.

E006 {0} should be absent in the group with the highest number.

E007 {0} may be absent in no more than {1} group{2} in the table.

E008 {0} must be absent in exactly {1} group{2} in the table.

E009 {0} must be present in no less than {1} group{2} in the table.

E020 {0} should not have value {1}.

E021 {0} and {1} should not have the same value.

E022 Value of {0} is incorrect.

E023 Value of {0} should be less than value of {1}.

E024 Value of {0} should be less than or equal to value of {1}.

E025 Value of {0} should be greater than value of {1}.

E026 Value of {0} should be greater than or equal to value of {1}.

E027 Value of {0} should be less than {1}.

E028 Value of {0} should be less than or equal to {1}.

E029 Value of {0} should be greater than {1}.

E030 Value of {0} should be greater than or equal to {1}.

E031 Value of {0} should not be in the future.

E032 Value of {0} should be equal to {1}.

E033 Value of {0} should not be equal to {1}.

E034 At least two FuelGroups have to be present.

E040 Numbering of items {0} incorrect.

E041 Either {0} should be present in every FuelGroup or MaximumSpeedNonPropulsion should be present.

E042 At least one of the CouplingCharacteristicValues (D, DC, S, U or V) should be present.

IC-01: IVI Content check Module (ICM) - EReg › media › 2295 › ivi-content-module-i… · ivi...

Documents

Transcript of IC-01: IVI Content check Module (ICM) - EReg › media › 2295 › ivi-content-module-i… · ivi...