iBOND Self Etch & iBOND Total Etch Bonding with confidence. · 4 iBOND® Self Etch One layer, many...
Transcript of iBOND Self Etch & iBOND Total Etch Bonding with confidence. · 4 iBOND® Self Etch One layer, many...
Product Information
iBOND® Self Etch & iBOND® Total EtchBonding with confidence.
Giving a hand to oral health.
2
iBOND®
Bonding with confidence.
All-round, everyday adhesives.
They need to be fast, and must be stable – for life. This is the assurance you need on a daily basis. You can rely on iBOND: it’s everything you need when it comes to solid bonding.
3
Two adhesives, one promise: precise bonding with Kulzer.
Your patients expect efficiency and reliability from you every day. These are precisely the qualities you expect from an adhesive.
iBOND Self Etch and iBOND Total Etch are the result of our many years of expertise in the development of bonding agents, providing you with the materials you need to create direct and indirect restorations. Simple, safe and scientifi-cally proven.
Our iBOND adhesives are a trusty team, delivering exactly what you need for perfect bonding: reliable adhesion, whatever the indication and technique.
■ All-in-one iBOND Self Etch. ■ Etch & Rinse two-step iBOND Total Etch.
X You have the choice, we have the right adhesive!
4
iBOND® Self EtchOne layer, many benefits.
iBOND Self Etch – The light-curing, self-etching, All-in-One adhesive.
■ Simplified application: etching, priming, bonding and desensitisation in a single step. ■ Reliable bonding, both to enamel and dentine. ■ Optimal marginal sealing. ■ Many years of clinical expertise; confirmed by numerous universities and practising dentists worldwide. ■ No refrigeration necessary.
iBOND Self Etch indications
■ Bonding of direct, light-curing composite restorations. ■ Bonding of indirect restorations in combination with a light-curing, luting cement. ■ Sealing hypersensitive areas of teeth.
0
5
10
15
20
25
30
35
Bond
Adper™ Prompt™L-Pop™
iBOND® Self Etch
Shear bond strength to deciduous teeth (dentine)*
Shea
r bo
nd s
tren
gth
(MP
a)
Multi-step
Source: Nelson et al., J Dent Res 86 (Spec Iss A): 1992, 2007.
* After thermocycling (1,000 cycles)
Self-etch, single-step
Clearfil™ SEBond
Clearfil™ S3
0
20
40
60
80
100
iBOND® GLUMA® Inside
OptiBond™ FL
Bond
iBOND® Self Etch
86.
095
.8
90.
510
0.0
100.
095
.8
99.
49
9.3
Marginal integrity of class II composite fillings with iBOND Self Etch
Inte
grity
of
cerv
ical
den
tine
mar
gins
(%)
Source: Prof. Haller, University of Ulm, Germany.
Unpublished data. Documentation available.
Before thermomechanical stress After thermomechanical stress
Clearfil™ S3
5
iBOND Self Etch – High initial bond strength equivalent to a three-step adhesive
iBOND Self Etch – High bond strength in a single step, from just one bottle
iBOND Self Etch – Perfect margins even after ageingiBOND Self Etch – High bond strength comparable with total-etch adhesives
15.0
13.4
13.6
13.9
14.1
14.6
14.6
14.2
14.1
13.4
14.4
1614121086420
Opt
iBon
d™
FL
B
ond
Hyb
rid
Bon
d
G-B
ond™
iBO
ND
®
Self
Etch
Scot
ch -
bond
™1
XT
Opt
iBon
d™
Solo
Plu
sA
dmira
®
Bon
d
Bon
d
Adh
eSE®
XP B
ond™
Initial shear bond strength to dentine
Two- step
Three-step
Shea
r bo
nd s
tren
gth
(MP
a)
Source: Degrange M, University of Paris, France, 2007.
Unpublished data. Documentation available.
Single- step
Cle
arfil
™ S
E
Cle
arfil
™ S
3
OptiBond™ Solo Plus iBOND® Self EtchiBOND® Total Etch0
5
10
15
20
25
21.9
26.8
24.0
22.9
25.7
27.3
Shear bond strength to enamel and dentine
Shea
r bo
nd s
tren
gth
(MP
a)
Source: Test of shear bond strength on enamel and dentine, Dr Miller M, Reality Research Lab, USA Test report, September 2009. Documentation available.
Dentine Enamel
6
iBOND Self Etch – Numerous dentists in Europe have already used iBOND Self Etch in more than 73,000 restorations*
iBOND Self Etch was rated as follows:
■ 95 % of dentists rated iBOND Self Etch as easy to use. ■ 86 % of dentists rated iBOND Self Etch as better than their current bonding system. ■ 93 % of dentists would recommend iBOND Self Etch to their colleagues.
* iBOND Self Etch field test involving dentists in Germany, Austria, Switzerland, Great Britain, Italy and France. Data available from the manufacturer.
Source: R&D Wehrheim, documentation available.Courtesy of: Boer WM, Euskirchen, Germany.
iBOND® Self EtchTried and tested, and rated good.
iBOND Self Etch – The enhanced film-forming properties guarantee optimal user safety
iBOND Self Etch – Class V restoration
X The clinical results obtained with iBOND Self Etch do not differ significantly from those of the control group in this five-year study.
iBOND Self Etch – Clinically proven.
Adhesive layer
Enamel
Composite
iBOND Self Etch behaves as good as total etch adhesive
0
20
40
60
80
100
B
B
A A A A A A A A A A A A
BBCB
BB
S
elf
Etch
Tota
l etc
had
hesi
ve
Tota
l etc
had
hesi
ve
Tota
l etc
had
hesi
ve
Tota
l etc
had
hesi
ve
Tota
l etc
had
hesi
ve
Tota
l etc
had
hesi
ve
iBO
ND
®
iBO
ND
®
iBO
ND
®
iBO
ND
®
iBO
ND
®
iBO
ND
®
Sel
f Et
ch
S
elf
Etch
S
elf
Etch
S
elf
Etch
S
elf
Etch
Res
tora
tion
s [%
]
Retention Caries Post- op sensitivity Anatomic form Marginal adaptation Marginal discolouration
A = excellent B = clinical acceptable C/D = repair/replacement needed
5years data: Lee L, University of Loma Linda, Loma Linda, USA, test report. Unpublished data. Data on file. Publication of 4-years report: Lee SS, Meharry M, Arambula M, Lee DH, Li Y: iBOND Self Etch and GLUMA, A 48-Month Clinical Evaluation. J Dent Res 91 (Spec Iss B): 706, 2012
7
iBOND® Self EtchBonding with confidence.
iBOND Self Etch – Etching, priming, bonding and desensitisation in a single step!
■ One step: iBOND Self Etch is applied as a single layer.
■ Clear results after air-drying: A perfectly identifiable, glossy surface after air-drying the adhesive signifies that it has been effectively cross-linked with the surface of the tooth.
■ Homogeneous layer: Due to its optimised consistency, iBOND Self Etch is not dispersed and creates a homogeneous adhesive layer on the dentine and enamel – the foundation for outstanding, long-lasting results.
■ Stable: The excellent stability of iBOND Self Etch permits storage at room temperature.
iBOND Self Etch – Step-by-step application
8
iBOND® Total EtchFor a stable bond.
The light-curing Etch & Rinse (two-step) bonding system.
■ Easy to use with application of just a single layer and rapid air-drying. ■ Clinically proven, reliable bond strength. ■ Maximum desensitisation. ■ Outstanding marginal quality. ■ Impressive handling. ■ Endorsed by numerous universities and practising dentists worldwide. ■ No refrigeration necessary.
iBOND Total Etch indications:
■ Bonding of direct composite, Polyglas® and compomer restorations. ■ Bonding of indirect laboratory-fabricated ceramic, Polyglas® and composite restorations. ■ Treatment of hypersensitive tooth regions.
9
iBOND Total Etch – Excellent bonding with the total-etch technique
iBOND Total Etch – Excellent bonding stability after 6 months iBOND Total Etch – Outstanding marginal integrity
05
101520253035404550
Source: Kulzer GmbH, F&E Bondings, Wehrheim, Germany. Unpublished data. Documentation available.
XP Bond™ iBOND® Total EtchOptiBond™ SoloPlusPrime & Bond® NT™ExciTE®
Shea
r bo
nd s
tren
gth
(MP
a)
High bond strength
Enamel Dentine
Adper™ Scotchbond™ 1XT
–20
–15
–10
–5
0
5
10
15
–16.1–5.82.0
OptiBond™ Solo Plus
Prime & Bond® NT™
iBOND® Total Etch
Change in bond strength to dentine after storage in water
Source: Navarra CO, Mazzoni A, Di Leonarda R, Cadenaro M, Breschi L: Immediate and 6-month bonding effectiveness of different two-step
etch-and-rinse adhesives. J Dent Res 89 (Spec Iss B), abstract 1346, 2010.
Diff
eren
ce in
mic
rote
nsile
bon
d st
reng
th a
fter
6 m
onth
s (M
Pa)
0
0.5
1
1.5
Adper™Scotchbond™
1XT
XP Bond™ ExciTE® iBOND® Total Etch
Dye
pen
etra
tion
(mm
)
Dye penetration depth after thermomechanical loading
Along the composite/dentine interface In the tubuli
Source: Prof. Haller, University Hospital, Ulm, Germany.
Unpublished data. Documentation available.
10
iBOND® Total EtchTried and tested, and rated good.
iBOND Total Etch – Dentists in Europe have already tested and rated* iBOND Total Etch.
iBOND Total Etch was rated as follows:
■ 96 % of dentists rated iBOND Total Etch as easy to use. ■ 87 % of dentists would recommend iBOND Total Etch to their colleagues. ■ 75 % of dentists rated iBOND Total Etch as their preferred Etch & Rinse bonding agent.
* iBOND Total Etch field test involving dentists in Germany, Austria, Switzerland, Great Britain and Italy. Data available from the manufacturer.
iBOND Total Etch – The enhanced film-forming properties of iBOND Total Etch guarantee optimal user safety.
Source: R&D Wehrheim, data on file.
Adhesive layer on dentine
Dentine
Composite
20 – 30 s 15 – 20 s
20 s
15 s
20 s
11
iBOND® Total EtchBonding with confidence.
iBOND Total Etch – Easy, convenient bonding with the proven total-etch technique!
■ One step: iBOND Total Etch is applied in just one step after etching with iBOND Etch; laborious rubbing actions are no longer necessary.
■ Clear results after air-drying:A perfectly identifiable, glossy surface after air-drying the adhesive signifies that it has been effectively cross-linked with the surface of the tooth.
■ Homogeneous layer:Due to its optimised consistency, iBOND Total Etch is not dispersed and creates a homo geneous adhesive layer on the dentine and enamel – the foundation for outstanding, long-lasting results.
■ Stable: The excellent stability of iBOND Total Etch ensures that it can be stored at room temperature; no refrigeration is necessary.
For etching enamel and dentine, we recommend iBOND Etch which is supplied with iBOND Total Etch or can be ordered separately.
iBOND Total Etch – Step-by-step application
12
iBOND® Self Etch and iBOND® Total EtchA team you can rely on.
USA ■ Dr Miller, Reality Research Lab1, 2
■ Prof. Lee, Loma Linda University1
■ Dr Lu, Loma Linda University1
■ Prof. Thompson, University of San Antonio1
■ Prof. Soderholm, University of Florida1
■ Dr Yapp, The Dental Advisor1
■ Prof. Kugel and Prof. Perry, Tufts University1, 2
■ Dr Ibarra, University of Washington
■ Dr Özer, University of Pennsylvania2
Asia ■ Prof. Uno, University of Tokyo, Japan1
■ Dr Tsubota, Nihon University, Japan1
■ Prof. Kanehira, Tohoku University, Japan1
Europe ■ Prof. van Meerbeek, University of Leuven, Belgium
■ Prof. Frankenberger, University of Erlangen, Germany1
■ Prof. Finger, University of Cologne, Germany1, 2
■ Prof. Ernst, University of Mainz, Germany1
■ Prof. Haller, University of Ulm, Germany1, 2
■ Prof. Hannig, University of Homburg, Germany1
■ Prof. Ilie, University of Munich, Germany1
■ Prof. Cerutti, University of Brescia, Italy1, 2
■ Prof. Breschi, University of Trieste, Italy2
■ Dr Rupf, University of Leipzig, Germany1
■ Prof. Degrange, University of Paris, France1
■ Dr Foxton, King’s College London, Dental Institute, UK1
■ Dr Blunck, Charité Berlin, Germany1
1 iBOND Self Etch 2 iBOND Total Etch
■ in vivo ■ in vitro
Verified by scientific studies.
We have been developing adhesive systems for more than 25 years: from one of the very first enamel bonding systems to state-of-the-art products now in their 4th and 5th generation, such as GLUMA Solid Bond and iBOND Total Etch, and the 7th generation iBOND Self Etch. Our adhesives are the product of our all-round expertise in composite bonding and decades of market experience with every generation of bonding system.
The exceptional reliability and quality of iBOND products have been verified by more than 15 research teams.
13
iBOND® Self Etch and iBOND® Total EtchPrecision right down …
iBOND Self Etch and iBOND Total Etch – More precise, more economical – with drop control.
Have you and your assistant ever complained about that drop running down the dropper, jamming the cap? That becomes a thing of the past with our newly designed droppers for bonding agents and desensitizers. The notched design ensures a better cut of the drop. This not only prevents drops from running down the bottle. The new drop control entails several other benefits:
■ No jamming or soiling of the opening. ■ A very precise output of bonding agent: Depending on the applied pressure on the unique soft bottle, you can produce a smaller or bigger drop – always with a clean cut.
■ The amount of single drops goes up to 220 per bottle – saving you about 50 drops per bottle.
Our quality seal: It cracks with the first opening
Every bottle of bonding agent and desensitizer now also comes with aquality seal, that cracks when you first open it. This seal tells you that the bottle fulfils our quality standards and is untapped.
It is always our aim to make your daily business more convenient and efficient for you. You will quickly come to appreciate the precise drop control and the opening protection. Why not enjoy the comfort of quality material in well-thought packaging?
14
iBOND® Self EtchProduct portfolio.
iBOND Self Etch Bottle Refill1 x 4 ml bottle50 application tipsMixing wellPictorial cardArt.-No.: 66046242
iBOND Self Etch Bottle Value Pack 3 x 4 ml bottlePictorial cardArt.-No.: 66046243
iBOND Self Etch Single Dose Refill50 single-dose units50 application tipsPictorial cardArt.-No.: 66046244
iBOND Self Etch Single Dose Value Pack 100 single-dose units100 application tipsPictorial cardArt.-No.: 66046245
15
iBOND® Total EtchProduct portfolio.
iBOND Etch 35 Fluid 1 x 15 ml bottleArt.-No.: 66039868
iBOND Etch
iBOND Etch 35 Gel 2 x 2.5 ml syringe25 cannulasArt.-No.: 66039862
iBOND Total Etch Single Dose Refill 50 single-dose units50 application tipsPictorial cardArt.-No.: 66040093
iBOND Total Etch Single Dose Value Pack 100 single-dose units100 application tipsPictorial cardArt.-No.: 66039870
iBOND Total Etch Bottle Refill 1 x 4 ml bottle50 application tipsMixing wellPictorial cardArt.-No.: 66040094
iBOND Total Etch Bottle Value Pack 3 x 4 ml bottlePictorial cardArt.-No.: 66039867
iBOND Total Etch Bottle Assortment1 x 4 ml bottle50 application tipsMixing wellPictorial card2 x 2.5 ml syringe iBOND Etch 35 Gel25 cannulas Art.-No.: 66039866
kulzer.com
Venus® Diamond and Venus® Pearl – Beauty beyond aesthetics.
Whether firm or creamy, Venus Diamond and Venus Pearl nano-hybrid composites make handling no trouble at all.
■■ Easy and convenient handling: Select the consistency according to preference and indication. Both composites are highly stable, with a low-stick consistency and longer working time, delivering perfect sculptability.
■■ Outstanding physical properties: An innovative formula providing long-lasting, aesthetically pleasing restorations with a permanent, natural lustre.
■■ Pure aesthetics: The material adapts perfectly to the colour of the surrounding teeth, creating an outstandingly natural look. Your patients will be delighted – and so will you!
Contact in GermanyKulzer GmbH Leipziger Straße 2 63450 Hanau, Germany [email protected]
W18
709
66
06
547
8 EN
07/
201
7 O
RT
© 2017 Kulzer GmbH. All Rights Reserved.
Optibond™ FL and OptiBond™ Solo Plus are trademarks of Kerr Corporation • XP Bond™ and Prime & Bond® NT™ are trademarks of Dentsply De Tray GmbH • Adper™ Scotchbond™ 1XT and Adper™ Prompt™ L-Pop™ are trademarks of 3M Company • Admira® Bond is a trademark of Voco GmbH • Clearfil™ SE Bond and Clearfil™ S3 Bond are trademarks of Kuraray Co. Ltd. • AdheSE® and ExciTE® are trademarks of Ivoclar Vivadent, Inc. • Hybrid Bond is a trademark of Sun Medical • G-Bond™ is a trademark of GC America