iBC roof Hook “MaMMut forM s”
Transcript of iBC roof Hook “MaMMut forM s”
MiniMuM work – MaxiMuM tiMe-savings
TopFix 200
iBC roof Hook “MaMMut forM s”
IBC TopFix 200 roof hook “Mammut Form S” puts an end to time-consuming handling of roof tiles. Broken tiles or other roof damages are also a thing of the past with this.The roof hook “Mammut Form S” distributes loads on its additional beam on the bottom side homogeneously among roof battens and rafters and consequently pre-vents damage to the roofing.Thanks to the combination of roof hooks and shaped tiles, only the existing roof tile needs to be replaced by “Mammut Form S” – as a result, time-consuming and ex-pensive handling of the roof tiles is no longer.In addition, all TF-50 carrier profiles of the TopFix 200 system can be used. The roof hook “Mammut Form S” is available for numerous shaped tiles and in various colors. Its safety aspect is also convincing: static tests confirmed its especially good suitability for regions with heavy snow and wind load.*
*Static design using PV Manager is required.
HIgHlIgHTS
Roof hook combined with shaped roof tilesComplete with 400 mm support beam including
self-drilling screws for screwing to the roof structureStatically suitable for high snow and wind loads Corrosion protection thanks to combination of hot-dip
galvanized steel and powder coating10-year product warranty**Available in the colors chestnut brown1), dark brown1),
brick-red1), anthracite2) and red brown2).Can be designed using “PV Manager”Approval by the Building Supervisory Authority is in
preparationCertified by the german Technical Standards
Board (TÜV)
1) per order2) ex stock IBC
Your IBC SOlAR partner:
www.ibc-solar.com IBC SOlAR Ag | Am Hochgericht 10 | 96231 Bad Staffelstein, germany | Phone +49 (0) 9573 9224 0
Rooftop module holder riveted on metal roof panel, complete with 400 mm batten rail, including drilling screws for mounting to roof
Can be used with high static loads (wind load zone 4, snow load zone 3)
Corrosion protection with a combination of hot-dip galvanized steel and powder coating
Available in the following colors: chestnut brown1), dark brown1), brick red1), anthracite2) and auburn2)
Approval by the Building Supervisory Authority in preperation
TÜV certified
1) per order2) ex stock IBC
Articlenumber Designation Color
6700700001 Roof Hook Mammut form S – Biber red brown
6700700002 Roof Hook Mammut form S – Biber anthracite
6700700003 Roof Hook Mammut form S – Interlocking tiles A (Jungmeier+Bogen/Koramic, Erlus) red brown
6700700004 Roof Hook Mammut form S – Interlocking tiles A (Jungmeier+Bogen/Koramic, Erlus) anthracite
6700700005 Roof Hook Mammut form S – Flat roof socket red brown
6700700006 Roof Hook Mammut form S – Flat roof socket anthracite
6700700007 Roof Hook Mammut form S – Frankfurter Pfanne red brown
6700700008 Roof Hook Mammut form S – Frankfurter Pfanne anthracite
6700700009 Roof Hook Mammut form S – Heidelberger Dachstein red brown
6700700010 Roof Hook Mammut form S – Heidelberger Dachstein anthracite
6700700011 Roof Hook Mammut form S – more tiles roof and -colours chestnut brown, brick red, dark brown
07.11.2011
** Product and power warranty in accordance with the version of the full warranty conditions received from your specialized IBC SOlAR partner at the time of installation. This warranty is valid only when the relevant prod-uct is installed in accordance with the applicable installation instructions. Subject to modifications that represent process.
* Please refer to the current installation instructions for the required ballast figures and installation specifications. All dimensions in cm.