I-semester - All Branches (Main) June 2011
-
Upload
zaheer-abbas -
Category
Documents
-
view
215 -
download
0
Transcript of I-semester - All Branches (Main) June 2011
-
8/6/2019 I-semester - All Branches (Main) June 2011
1/6
Note:This Time-Table is also applicable for Pre-Ph.D. students registered forFebruary 2011 Examination.
UNIVERSITY COLLEGE OF ENGINEERINGOSMANIA UNIVERSITY, HYDERABAD
M.E. (CIVIL) I-Semester Regular and I, III & V Semester PTPG (Make-up) Examination
June 2011
EXAMINATION TIME TABLE
Time : 2.00 P.M. to 5.00 P.M.
Day & Date
Structural EngineeringGeo-Technical
Engg.Hydromechanics & Water Management Transportation Engg.
Construction
Engg. &
Management
Infrastructure
Engg.
RegularI - Semester
PTPGI - Semester
PTPGIII-Semester
RegularI - Semester
RegularI-Semester
PTPGI - Semester
PTPGIII-Semester
RegularI-Semester
PTPGI-Semester
RegularI - Semester
RegularI-Semester
22-06-2011WEDNESDAY
Structural
Optimisation
Structural
Optimisation
Structural
Optimisation
Advanced Soil
Mechanics
Engg.
Hydrology
Engg.
Hydrology
Water
PowerEngg.
Traffic
Engineering
Traffic
Engg.
Construction
Methods &Equipments
Project
PerformanceManagement
23-06-2011
THURSDAY
Theory of
Elasticity
Theory of
Elasticity======
Soil Dynamicsand Machine
Foundations
Open Channel
Hydraulics=======
OpenChannel
Hydraulics
UrbanTransportation
Systems
Planning
UrbanTransportation
Systems
Planning
GeographicInformation
System
UrbanTransportation
SystemsPlanning
24-06-2011
FRIDAY
Theory of
Plates ======= =======
Sub-Soil
ExplorationMethods
Irrigation
Development& Mgmt.
======= =======Pavement
MaterialCharacterization
Pavement
MaterialCharacterization
Safety
Management
in
Construction
Advanced
ConcreteTechnology
25-06-2011SATURDAY
StructuralAnalysis
=======
Theory of
Shells &Folded
Plates
Adv. Engg.Geology
Flood Control& Mgmt.
FloodControl &
Mgmt.
FloodControl &
Mgmt.
StatisticalTechniques
=======Construction
Project
Administration
StructuralDesign
27-06-2011
MONDAY
Adv.
Reinforced
ConcreteDesign
=======
Adv.
Reinforced
ConcreteDesign
Foundation
Engineering-I
Adv. Fluid
Mechanics======= ======= Rural Roads
=======Quantitative
Methods in
Const.Management
Foundation
Engineering
28-06-2011TUESDAY
Finite
ElementMethods
Finite
ElementMethods
======
Finite
ElementMethods
Water
ResourcesSystems
Mechanics
ofSediment
Transport
Mechanics
ofSediment
Transport
Finite
ElementMethods
=======
Economic
DecisionAnalysis in
Construction
Water ResourcesSystems
-Sd-DIRECTOR OF EVALUATION
EXAMINATION CELL
Examination Centre:
Main Building
UCE (A), O.U.
-
8/6/2019 I-semester - All Branches (Main) June 2011
2/6
Note:This Time-Table is also applicable for Pre-Ph.D. students registered forFebruary 2011 Examination.
UNIVERSITY COLLEGE OF ENGINEERINGOSMANIA UNIVERSITY, HYDERABAD
M.E. (EE) I Semester Regular and I & III - Semester PTPG (Make-up) ExaminationJune 2011
EXAMINATION TIME TABLE
Time : 2.00 P.M. to 5.00 P.M.
Date & Day Industrial Drives and Control Power Systems
Power
ElectronicSystems
RegularI - Semester
PTPG
I - SemesterPTPG
III - SemesterRegular
I -SemesterPTPG
I - SemesterPTPG
III - SemesterRegular
I -Semester
22-06-2011
WEDNESDAY
Modern
Control Theory========== ==========
Modern Control
Theory========= =========
Modern Control
Theory
23-06-2011
THURSDAY
Optimization
Methods==========
Optimization
Methods
Optimization
Methods
Optimization
Methods
Optimization
Methods
Solid State
Electric Drives
24-06-2011
FRIDAY
========== ==========Solid State AC
Motor Control
High Voltage
DC Transmission
========= =========
High Voltage
DC
Transmission
25-06-2011
SATURDAY
Power
Semiconductor
Devices and
Circuits
Power
Semiconductor
Devices and
Circuits
========== ==========
Flexible AC
Transmission
System
Flexible AC
Transmission
System
Power
Semiconductor
Devices &
Circuits
27-06-2011
MONDAY
Digital
Circuits &
Logic Design
Digital
Circuits &
Logic Design
Digital Circuits
& Logic Design
Computer Aided
Power Systems
Analysis
Computer Aided
Power Systems
Analysis
Computer
Aided Power
Systems
Analysis
Digital Circuits
& Logic Design
28-06-2011
TUESDAY
Machine
Modelling &Analysis
Machine
Modelling &Analysis
==========
Advanced
Synchronous
Machine Theory ========= =========
Power Electronic
Converters-I
29-06-2011
WEDNESDAYSolid State DC
Motor Control========== ========== ========== ========== ========== ==========
30-06-2011
THURSDAY========== ========== ==========
Distribution
Engineering========== ========== ==========
-Sd-DIRECTOR OF EVALUATION
EXAMINATION CELL
Examination Centre:
Main Building
UCE (A), O.U.
-
8/6/2019 I-semester - All Branches (Main) June 2011
3/6
Note:This Time-Table is also applicable for Pre-Ph.D. students registered forFebruary 2011 Examination.
UNIVERSITY COLLEGE OF ENGINEERINGOSMANIA UNIVERSITY, HYDERABAD
M.E. (E.C.E.) I-Semester Regular and I & IIISemester PTPG (Make-up) Examination June 2011
EXAMINATION TIME TABLE
Time : 2.00 P.M. to 5.00 P.M.
Date and Day
Digital Systems Systems & Signal Processing
Microwave &
Radar
Engineering
Embedded
Systems and
VLSI Design
Regular
I-Semester
PTPG
I-Semester
PTPG
III-Semester
Regular
I-Semester
PTPG
I-Semester
PTPG
III-Semester
Regular
I-Semester
Regular
I-Semester
22-06-2011
WEDNESDAY
Coding
Theory
Coding
Theory======
Coding
Theory
Coding
Theory
Real TimeSignal
Processing
OpticalCommunication
Systems
Physics ofSemiconductor
Devices
23-06-2011THURSDAY
====== ====== ======OptimizationTechniques ======
======OptimizationTechniques
======
24-06-2011
FRIDAY
FieldProgrammable
Gate Arrays ======
FieldProgrammable
Gate Arrays
Engineering
Mathematics======
Engineering
Mathematics
Radar Systems
EngineeringDigital Design and
PLDS
25-06-2011
SATURDAY
Modern DSP Modern DSP ====== Modern DSP Modern DSP ====== ======Principles of VLSI
System Design
27-06-2011
MONDAY
VLSI Design &
Technology
VLSI Design &
Technology====== ====== ====== ======
Electromagnetic
Field Theory======
28-06-2011
TUESDAY
Mobile
Computing ======Mobile
Computing
Global
Navigational
Satellite
Systems
====== ======Global
NavigationalSatellite Systems
Digital IC Design
29-06-2011
WEDNESDAY
Low Power
VLSI Design======
Low Power
VLSI Design====== ====== ======
Microwave
Circuits
Low Power
VLSI Design
30-06-2011THURSDAY
====== ====== ====== DigitalControl
DigitalControl
DigitalControl
======
Micro Controllers
for Embedded
Systems Design
-Sd-DIRECTOR OF EVALUATION
EXAMINATION CELL
Examination Centre:
Main Building
UCE (A), O.U.
-
8/6/2019 I-semester - All Branches (Main) June 2011
4/6
Note:This Time-Table is also applicable for Pre-Ph.D. students registered forFebruary 2011 Examination.
UNIVERSITY COLLEGE OF ENGINEERINGOSMANIA UNIVERSITY, HYDERABAD
M.E. (BME) ISemester Regular (Make-up) Examination June 2011
EXAMINATION TIME TABLE
Time : 2.00 P.M. to 5.00 P.M.
Date & DayBIOMEDICAL ELECTRONICS
I-Semester
22-06-2011
WEDNESDAYMEDICAL SENSORS
23-06-2011THURSDAY
MEDI EMBEDDED SYSTEMS
24-06-2011
FRIDAYELECTRONIC SYSTEM DESIGN
25-06-2011
SATURDAYMEDICAL INSTRUMENTATION
27-06-2011
MONDAYPHYSIOLOGY FOR ENGINEERS
28-06-2011
TUESDAYBIO-STATISTICS
-Sd-DIRECTOR OF EVALUATION
EXAMINATION CELL
Examination Centre:Main Building
UCE (A), O.U.
-
8/6/2019 I-semester - All Branches (Main) June 2011
5/6
Note:This Time-Table is also applicable for Pre-Ph.D. students registered forFebruary 2011 Examination.
UNIVERSITY COLLEGE OF ENGINEERINGOSMANIA UNIVERSITY, HYDERABAD
M.E. (Mech. Engg.) ISemester (Regular) and I & III-Semester PTPG (Make-up) Examination
June 2011
EXAMINATION TIME TABLE
Time : 2.00 P.M. to 5.00 P.M.
Date & Day
Production Engineering Turbo Machinery Automation & Robotics CAD/CAM Tool Design
Regular
I-Semester
P T P G
I-Semester
P T P G
III-Semester
Regular
I-Semester
P T P G
I-Semester
Regular
I-Semester
P T P G
I-Semester
P T P G
III-Semester
Regular
I-Semester
Regular
I-Semester
22-06-2011WEDNESDAY
Advanced
Metrology========= =========
Fluid Flow and
Gas Dynamics
Fluid Flow and
Gas DynamicsRobotic Engg. ========= =========
Robotic
Engineering
Advanced
Metrology
23-06-2011
THURSDAYAutomation Automation
ProductDesign &
Process
Planning
Principles of
Turbo Machinery========= Automation Automation ========= Automation
Machine Tool
Design
24-06-2011FRIDAY
Metal
FormingScience
Metal
FormingScience
========= ========= =========
Computer Aided
MechanicalDesign and
Analysis
=========
Computer
Aided
MechanicalDesign and
Analysis
Computer
Aided
MechanicalDesign and
Analysis
Metal
ProcessingScience
25-06-2011
SATURDAY
Computer
Integrated
Manufacturing
=========
Computer
Integrated
Manufacturing
Experimental
Techniques in
Turbo Machinery
Experimental
Techniques in
TurboMachinery
Computer
Integrated
Manufacturing
=========
Computer
Integrated
Manufacturing
Computer
Integrated
Manufacturing
=========
27-06-2011MONDAY
Finite ElementTechniques
=========Finite Element
TechniquesDesign of Gas
Turbines========= ========= ========= =========
Finite ElementTechniques
Design of
Metal Cuttingtools and
Accessories
28-06-2011
TUESDAY========= ========= =========
Heat Transfer and
Heat Exchangers
in Power Plants
Heat Transfer
and Heat
Exchangers inPower Plants
Control of
Dynamic System
Control of
Dynamic
System
========= =========Design of
Dies
29-06-2011WEDNESDAY
Experimental
Techniquesand Data
Analysis
Experimental
Techniquesand DataAnalysis
=========Fuels and
Combustion========= ========= ========= ========= =========
Experimental
Techniquesand Data
Analysis
30-06-2011THURSDAY
========= ========= ========= ========= =========OptimizationTechniques
OptimizationTechniques
OptimizationTechniques
OptimizationTechniques
=========
-Sd-
DIRECTOR OF EVALUATION
EXAMINATION CELL
Examination Centre:Main Building
UCE (A), O.U.
-
8/6/2019 I-semester - All Branches (Main) June 2011
6/6
Note:This Time-Table is also applicable for Pre-Ph.D. students registered forFebruary 2011 Examination.
UNIVERSITY COLLEGE OF ENGINEERINGOSMANIA UNIVERSITY, HYDERABAD
M. Tech. (C S E) I-Semester Regular and I & III-Semesters PTPG (Make-up) Examination
June 2011
EXAMINATION TIME TABLE
Time : 2.00 P.M. to 5.00 P.M.
-Sd-
DIRECTOR OF EVALUATION
EXAMINATION CELL
Date and Day
Parallel & Distributed Systems CSE
Regular
I - Semester
Regular
I - Semester
PTPG
I - Semester
PTPG
III - Semester
22-06-2011
WEDNESDAYDistributed Algorithms Advanced Algorithms Advanced Algorithms Grid Computing
23-06-2011
THURSDAYParallel Computer Architectures ======= ======= =======
24-06-2011
FRIDAYDistributed Computing Distributed Computing ======= Distributed Computing
25-06-2011
SATURDAY======= Advanced Operating Systems Advanced Operating Systems ========
27-06-2011
MONDAY
Object Oriented SoftwareEngineering
Object Oriented SoftwareEngineering
=======Information Retrieval
Systems
28-06-2011
TUESDAYWeb Services Advanced Computer Graphics ======= ==========
29-06-2011
WEDNESDAYMobile Computing Mobile Computing Mobile Computing =======
Examination Centre:
Main Building
UCE (A), O.U.