1

I-PASOLINKI-PASOLINKInitial setting and equipment Initial setting and equipment

configurationconfiguration

TOPC-E4011E-02- ＸＸＸＸＸＸ

I-PASOLINK configuration and initial I-PASOLINK configuration and initial setupsetup

Note; LCT Port supports DHCP Default IP address is 172.17.254.253

10/100 Base-TX (RJ-45)

For iPasolink 1000

For iPasolink 400

For iPasolink 200

TOPC-E4011E-02- ＸＸＸＸＸＸ 3

LCT COMMUNICATION INTERFACELCT COMMUNICATION INTERFACE

THE LOCAL CRAFT TERMINAL IS USED TO SETUP, MONITOR AND MAINTAIN iPASOLINK RADIO. iPASOLINK SUPPLY USER GUI ENVIRONMENT THROUGH WEB BROWSER. LCT SUPPORTS BOTH LOCAL AND REMOTE

CONNECTIONS

COMMUNICATION BETWEEN THE LCT AND THE iPASOLINK IS VIA THE LCT PORT OF IDU CONNECTED BY LAN CABLE.

10/100 Base-TX (RJ-45)

SET THE PC INTERNET PROTOCOL, TCP IP PROPERTIES TO “OBTAIN IP ADDRESS AUTOMATICALLY “ AND “OBTAIN DSN SERVER ADDRESS AUTOMATICALLY”

LCT Port supports DHCP Default IP address is 172.17.254.253

4

LCT Startup and LoginLCT Startup and Login

Start the browser Internet Explorer and enter the URL http://172.17.254.253/weblct/ to open the WebLCT Login screen.

Enter the “User Name” and “Password” in the provided text boxes and Click Ok button

Default Username : Admin

Password: 12345678

LCT main menu opens in the “Current Status screen”

5

WebLCT LOGOUTWebLCT LOGOUT

To Logout of the WebLCT, click on the Logout button on the top right hand of the LCT screen.

When Logout Confirm window appears, Click Yes

LCT Login window appears

Close the Browser window to exit WebLCT.

Always Logout using this button before disconnecting the cable.

6

WebLCT Initial ScreenWebLCT Initial ScreenLogin User Name

Indicate the current logged in user

Summary Alarm Indication

Indicate the summary alarm of ODU, IDU, AUX I/O, TCN, & Maintenance Status

Opposite Site Links

Connect to opposite station (s)

Maintenance

Maintenance ON/OFF button

Logout

Logout button

Menu tree

Indicate the LCT Main Menu

Block Diagram

Indicate the ODU, IDU and Interfaces

mounted

Detail Display

Display detail alarm & status information of items selected from the Tabs

7

WebLCT Initial ScreenWebLCT Initial ScreenF/W Version

Indicate the current Firm Ware Version

Site (NE) Name and IP Address

Indicate Network element name and it’s IP address

Opposite Site Links

Connect to opposite station (s)

Connecting to opposite site

Click on the opposite site links and select the site to connect to. Login screen for selected opposite site

open in a separate browser window

8

NETWORK MANAGEMENT NETWORK MANAGEMENT

9

GENERAL SETTINGGENERAL SETTING

Item Parameter Description

IP Address Setting (Bridge 1)

IP Address x.x.x.x Input Primary IP Address of NE

Subnet Mask x.x.x.x Input Subnet Mask

Default Gateway x.x.x.x Input Default Gateway IP

address

NMS Port Setting

Connect NMS Port to

NMS

Yes Use NMS Port

No Not use NMS Port

1Select General Setting from the Network Management Configuration Menu. NE Primary IP Setting is displayed

1Click the Setup icon, General Setting window opens.

22

Enter the Primary IP address for the NE (Bridge1), Subnet Mask, and Default Gateway for the Bridge1. See the table for details

3

3

10

GENERAL SETTING (DETAIL) 1 of 5GENERAL SETTING (DETAIL) 1 of 5

1

Select General Setting (Detail) from the Network Management Configuration Menu. General Setting Detail screen opens showing the network parameter setting

1

2

2

To change Network parameters, Click the Setup icon, General Setting (Detail) window opens

3

3

After changing/ modifying the parameters click OK button

11

GENERAL SETTING (DETAIL) 2 of 5GENERAL SETTING (DETAIL) 2 of 5Item Parameter Description

NE2 Port Setting

NE2 Port IP

Address

x.x.x.x Input IP Address of NE2 port used

for serial back-back connection

NE2 Port

Usage

Used Use NE2 port

Not Used Not use NE2 port

NE2 Port

Speed

9600 specify the line speed of NE2 port2

19200

Ethernet Port Setting (NMS / NE1 Port)

Usage Used Use Ethernet port

Not Used Not use Ethernet port

Auto

Negotiation

Enable enable the Auto Negotiation of

Ethernet port

Disable Disable the Auto Negotiation of

Ethernet port

Discovery

Usage

Used search of the network access

machinery using Ethernet connectionNot Used

NE Branch Setting

Branch

Number

1 to 4

Branches

Select the Branch Number

Default

Gateway

x.x.x.x Input the Default Gateway

Restrict LCT Connection

LCT Port

Setting

Any Connection from Local/Remote to

LCT Port

Only to

Local NE

only connection from Local to LCT

Port

Item Parameter Description

Inband Management VLAN Setting

VLAN ID 1 to 4094 VLAN ID of Inband Management VLAN

Inband management

VLAN usage

Used Use Inband management VLAN

Not Used Not use inband management function

IP Address x.x.x.x Enter IP address of inband management port

Subnet mask x.x.x.x enter subnet mask for inband management

12

GENERAL SETTING (DETAIL) 3 of 5GENERAL SETTING (DETAIL) 3 of 5

13

GENERAL SETTING (DETAIL) 4 of 5GENERAL SETTING (DETAIL) 4 of 5

When NE2 port is used for serial connection to other PASOLINK configure this NE2 Port Setting

When NE2 port is used for serial connection to other PASOLINK configure this NE2 Port Setting

Select usage of NMS and NE1 ports set the port parameters accordinglySelect usage of NMS and NE1 ports set the port parameters accordingly

LCT Port Setting : select “any” radio button to connect to remote NEs. From the local LCT Port

Select “Only to Local NE” radio button to prevent connection to remote NE from local LCT port.

LCT Port Setting : select “any” radio button to connect to remote NEs. From the local LCT Port

Select “Only to Local NE” radio button to prevent connection to remote NE from local LCT port.

Select Inband Management VLAN SettingSelect Inband Management VLAN Setting

14

GENERAL SETTING (detail) 5 of 5GENERAL SETTING (detail) 5 of 5

Select to which branch NMS port belongs to

Select to which branch Modem-2 port belongs to

Select the number of branches the NE belongs to

Enter the Bridge 2, IP address and Subnet Mask

15

ROUTING SETTINGROUTING SETTING