I. EARNED DEGREES - City University of Hong Kong · 4 Postdoc at CityU (co-advised with A....
Transcript of I. EARNED DEGREES - City University of Hong Kong · 4 Postdoc at CityU (co-advised with A....
1
October 2016
Kwok-Leung Tsui
City University of Hong Kong
(last five year highlighted)
I. EARNED DEGREES
Ph.D. in Statistics, University of Wisconsin, Madison.
M.Ph. in Mathematics, The Chinese University of Hong Kong.
B.Sc. in Chemistry, The Chinese University of Hong Kong.
II. EXPERIENCE
Academic:
Head of SEEM Dept. City University of Hong Kong 2011 - present
Chair Professor City University of Hong Kong 2009 - present
Professor Georgia Institute of Technology 2001 – 2011
Reader/Professor H K Univ. of Science & Tech 1996 – 1999
Associate Professor Georgia Institute of Technology 1990 - 2000
Member of Technical AT&T Bell Laboratories 1986 - 1990
Staff (Quality Assurance Center)
Statistical Consultant CALS Statistical Consulting Service 1985 - 1986
Research & Teaching University of Wisconsin, Madison 1981 - 1985
Assistant
Teaching Assistant The Chinese University of Hong Kong 1979 - 1981
Engineering and Statistical Consulting:
Technical Consultant in quality, statistics, and engineering:
AT&T, Philips, Motorola, SAIC, UPS, Six Continent Hotel Groups; Barnes and
Thornburg; AAMCO; Balch & Bingham.
Expert witness for Wilson, Sonsini, Goodrich, & Rosati: Case No. 1-03-CV-009885,
Amkor Technologies, Inc. Vs. Fujitsu Limited. Case in evaluating the testing and
inspection method for the defect problem and quality control responsibility of
computer hard-drives, October 2004 – April 2005.
Expert witness for Parker, Hudson, Rainer & Dobbs: Case in evaluating and testing
the quality and effectiveness of insecticide, 2006.
2
III. TEACHING
A. Individual Student Guidance
Ph.D. Students Supervised.
1. A. Li; started advising in Fall 1991; Comprehensive exam Spring 1992;
Graduated January 1995; Thesis title: "Analysis of Robust Design
Experiments and Taguchi Method in Quality Control".
2. G. R. Tucker; started in Fall 1993; graduated Summer 1995;
Thesis title: “A Quality Control Chart for Ordinal Categorical Data,”
(co-advised with W. Woodall at Univ. of Alabama.), Auburn University.
3. K. Palmer; started advising Summer 1994; graduated Summer 1998;
Project title: "Robust Optimization of Chemical Process Simulations.”
University of Southern California.
4. W. Jiang, started advising Fall 1996; graduated December 1999; Thesis
title: “Statistical Process Control and Automatic Process Control,”
Shanghai JiaoTong Univesity, (co-advised with F. Tsung.)
5. H. Liu, started advising Fall 1997, graduated June 2001; Thesis title,
“Statistical Quality Control on Supply Chain Management.” post-doc. in
University of Alberta, (co-advised with F. Tsung).
6. A. Luximon, started advising Spring 1999, graduated October 2001;
Thesis title: “Foot Modeling for Shoe Last Design,” (co-advised with R.
Goonetilleke), post-doc at Hong Kong Polytechnic University.
7. L. Shu, started advising Fall 1999, Thesis title, “Multi-stage Process
Control and Monitoring,” finished in Summer 2002, (co-advised with F.
Tsung), University of Macau.
8. S. Bae, Started advising Fall 2000, passed comprehensive exam. in 2000,
(co-advised with P. Kvam), graduated in December 2003, Hangyang
University.
9. T. Murphy, started advising Fall 2001, passed comprehensive exam in
2001, passed proposal in 2003, graduated in December 2004, Yale
University.
10. S.B. Kim, started advising Spring 2001, passed comprehensive exam in
2001, passed proposal in 2003, graduated in June 2005, Univ. of Texas-
Arlington, Korea University.
11. L. Bai, started advising Fall, 2000, passed comprehensive exam in 2002,
passed proposal in 2003, graduated in June 2005, Carlson Capital.
3
12. Y. Park, started advising Spring 2001, passed comprehensive exam in
2001, passed proposal in 2003, graduated in December 2004, Samsung.
13. S. Wang, started advising Fall, 2001, passed comprehensive exam in 2002,
passed proposal in 2005, graduated in August 2006, Bank of America.
14. X. Liu, started advising in Summer, 2006, passed comprehensive in Spring
2007, passed proposal in May, 2009, graduated in Summer 2011, Expedia.
15. S. Lo, started advising in Fall, 2006, passed comprehensive in Fall 2008,
passed proposal in Dec. 2008, graduated in August, 2010, Travelers Inc.
(co-advised with Y. Hung).
16. S. Han, started advising in Fall, 2007, passed comprehensive in Fall 2007,
passed proposal in Oct. 2008, graduated in June 2010, Korea Univ. (co-
advised with Y. Mei).
17. S. Reynolds, started advising in Spring 2008, passed comprehensive in
Fall 2007, passed proposal in 2014, graduated in Spring 2015, Center for
Disease Control and Prevention (co-advised with D. Goldsman).
18. M. L. Lee, started advising in Spring 2009, passed comprehensive in
Spring 2009, graduated in Fall 2013, Hongik University (co-advised with
S. Kim).
19. H. Zhao, started advising in Fall 2009, graduated in Mar. 2014, Macau
University of Science and Technology.
20. Y. Wang, started advising in Fall 2010, graduated in Jan. 2014, Xi’an Jiao
Tong University.
21. Y. Xing, started advising in Fall 2010, graduated in Mar. 2014, Postdoc at
Univ. of Maryland.
22. J. Cao, started advising in Fall 2010, graduated in Dec. 2014 (co-advised
with L. Shu).
23. Y. Hai, started advising in Fall 2010, graduated in Aug. 2015, Postdoc at
CityU.
24. S.S.Y. Ng, started advising in Fall 2011, graduated in Dec. 2014, Data
Scientist, ASTRI.
25. J. Tang, started advising in Fall 2011, graduated in May 2016, Postdoc at
Guangzhou University.
26. Y. Zhao, started advising in Summer 2013, graduated in Oct. 2015,
4
Postdoc at CityU (co-advised with A. Shrivastava).
27. F. Yang, started advising in Fall 2013.
28. H. Guo, started advising in Fall 2013, expected to graduate in Nov. 2016.
29. Q. Xu, started advising in Fall 2013.
30. M. Bakker, started advising in Fall 2014, (co-advised with H. Fung).
31. L. Yu, started advising in Fall 2015.
32. P. Xu, started advising in Summer 2016.
33. J. Omoleye, started advising in Fall 2016.
34. C.P. Lin, started advising in Fall 2016.
M.S. Thesis Students Supervised
1. S. McCaskey; started advising Fall 1993; Graduated December 1994;
Thesis title: "Analysis of Dynamic Characteristics in Robust Design
Experiments," works at Lucent Technology.
2. E. Ho; started advising Fall 1996; Graduated Summer 1998. Thesis title:
“Three Dimensional Foot Digitization.”
B. Other Teaching Activities
1. "Quality Improvement Using SPC and Taguchi Methods", April, 1992,
Jointly developed with H. Wadsworth and R. Heikes.
2. New course "DOE and the Taguchi Method".
IV. SCHOLARLY ACCOMPLISHMENTS
A. PATENTS, PUBLISHED BOOKS and CHAPTERS
1. Tsui, K.-L., "Taguchi's Robust Design and Some Alternatives," Chapter in
Statistics for Quality, 1996.
2. Patent No.: US 8,568,680 B2
Gas Treatment by Catalytic Ozone Oxidation
Inventor: K.S. Hui (Hong Kong, CN);K.L Tsui (Hong Kong, CN); M.O.
Fu (Hong Kong, CN), 2013.
Assignee: City University of Hong Kong.
5
3. Edesess, M., Tsui, K.-L., Fabbri, C., Peacock, G., “The Three Simple
Rules of Investing”, Berrett-Koehler, San Francisco, 2014.
B. Refereed Publications
Published:
p1. Lee, S. Y. and Tsui, K-L., "Covariance Structure Analysis in Several
Populations," Psychometrika, vol. 47, no. 3, pp. 297-308, 1982.
p2. Tsui, K. W., Matsumura, E. M. and Tsui, K.-L.,"Multinomial Dirichlet
Bounds for Dollar Unit Sampling in Auditing," The Accounting Review,
vol. LX, no. 1, pp. 76-96, 1985.
p3. Tsui, K.-L., Jewell, N. and Wu, C. F. J., “A Nonparametric Approach to
the Truncated Regression Problem,” Journal of the American Statistical
Association, vol. 83, pp. 785-792, 1988.
p4. Shoemaker, A. C., Tsui, K.-L. and Leon, R., "Discussion on Signal to
Noise Ratios, Performance Criteria and Transformation," Technometrics,
vol. 30, pp. 19-21, 1988.
p5. Tsui, K.-L., "Strategies for Planning Experiments Using Confounding
Tables and Orthogonal Arrays," The Quality and Reliability Engineering
International, vol. 4, pp. 113-122, 1988.
p6. Kacker, R. and Tsui, K.-L. "Interaction Graphs: Tools for Planning
Experiments," Journal of Quality Technology," vol. 22, no. 1, pp. 1-14,
1990.
p7. Shoemaker, A. C., Tsui, K.-L. and Wu, C.F.J.,"Economical
Experimentation Methods for Robust Parameter Design,” Technometrics,
vol. 33, pp. 415-428, 1991.
p8. Barton, R. R. and K.-L. Tsui, “Multivariate Yield Maximization using
CAD/CAE Models: Efficient Approximations Based on Mean and
Variance,” Design Theory and Methodology, ASME, 31, 1991.
p9. Barton, R. and Tsui, K.-L., “Multivariate Yield Maximization Using CAD
Models: Efficient Approximations Using Means and Variance,” Third
International ASME Conference, February, 1991.
p10. Jiang, H., Damodaran, S., Desai, P., Kumar, S., and Tsui, K.-L., “Analysis
of Tensile Recoil Method for the Compressive Strength Measurement,”
Polymer Materials Science & Engr., April 1991.
6
p11. Sun, X.-D. and Tsui, K.-L., “Consistency of Biased-Corrected Estimator
in Truncated Regression,” Proceedings of the International Symposium on
Nonparametric Statistics and Related Topics, Ottawa, 1991.
p12. Shoemaker, A.C. and Tsui, K.-L., "Taguchi's Parameter Design: A Panel
Discussion", Technometrics, vol. 34, pp. 127-161, 1992.
p13. Ng, K. and Tsui, K.-L., "Expressing Variability and Yield with a Focus on
the Customers," Quality Engineering, vol. 5, no. 2, pp. 255-268, 1992.
p14. Tsui, K.-L., "An Overview of Taguchi Method and Newly Developed
Statistical Methods on Robust Design", IIE Transactions, vol. 24/5, pp.
44-59, 1992.
p15. Shoemaker, A.C. and Tsui, K.-L., “Response Model Analysis for Robust
Design Experiments," Communications in Statistics, pp. 1037-1064, 1993.
p16. Leon, R.V., Shoemaker, A.S., and Tsui, K-L., "Discussion on “A
Systematic Approach to Planning for a Designed Industrial Experiment”,
Technometrics, vol. 35, no. 1, pp. 21-24, 1993.
p17. Tsui, K.-L. and Woodall, W.H., "Multivariate Control Charts Based on
Loss Functions", Sequential Analysis, vol. 12, no. 1, pp. 79-92, 1993.
p18. Amster, S. and Tsui, K.-L., "Counter Examples for the Component Search
Procedure", Quality Engineering, vol. 6, pp. 545-552, 1993.
p19. Jiang, H., Abhiraman, A.S., Tsui, K.-L., "Analysis of Failure in Recoil
FromTension of Pan-Based Carbon Fibers," Carbon, pp. 887-894, 1993.
p20. Chan, W., Allen, J., Mistree, F., and Tsui, K.-L., “Integration of Response
Surface Methods with the Compromise Decision Support Problem in
Developing Robust Design Procedure,” ASME Design Automation
Conference proceeding, Boston, ASME, p. 485-492, 1993.
p21. Hayter, A.J. and Tsui, K.-L., "Identification and Qualification in
Multivariate Quality Control Problems," Journal of Quality Technology,
vol. 26, no. 3, p. 197-208, 1994.
p22. Tsui, K.-L., "Avoiding Unnecessary Bias in Robust Design,"
Computational Statistics and Data Analysis, pp. 535-546, 1994.
p23. Tsui, K.-L. and Li, A., "Analysis of Smaller and Longer-the-Better Robust
Design Experiments," International Journal of Industrial Engineering, pp.
193-202, 1994.
p24. Chen, W., Allen, J.K., Mistree, F. and Tsui, K.-L., "A Procedure for
Robust Design: Minimizing Variations Caused by Noise and Control
Factors,” Journal of Mechanical Design, pp. 478-485, 1995.
7
p25. Tsui, K.-L., "Discussion of “Assessing Geometric Integrity Through
Spherical Regression Techniques”," Statistica Sinica, pp. 210-215, 1995.
p26. Dowling, M.M., Griffin, P.M., Tsui, K.-L., and Zhou, C., "A Comparison
of the Orthogonal Least Squares and Minimum Enclosing Zone Methods
for Form Error Estimation," Manufacturing Review, pp. 120-138, 1995.
p27. Tsui, K.-L., "A Multi-Step Analysis Procedure for Robust Design,"
Statistica Sinica, pp. 631-648, 1996.
p28. Tsui, K.-L., "A Critical Look at Taguchi’s Modeling Approach for Robust
Design," Journal of Applied Statistics, pp. 81-95, 1996.
P29. Shao, J. and Tsui, K.-L., “Bias Corrections of Form Tolerance
Estimation,” ASME Proceeding on Manufacturing Engineering, 1996.
p30. Zhou, C., Griffin, P.M., Dowling, M.M., and Tsui, K.-L., “Form
Error Estimation and Functional Tolerancing,” Advanced Tolerancing
Techniques, 1997.
p31. McCaskey, S.D. and Tsui, K.-L., "Analysis of Dynamic Robust Design
Experiments," International Journal of Production Research, pp. 1561-
1574, 1997.
p32. Dowling, M.M., Griffin, P.M., Tsui, K.-L., and Zhou, C., "Statistical
Issues in Geometric Tolerance Verification Using Coordinate Measuring
Machines," Technometrics, pp. 1-24, 1997.
p33. Woodall, W. H., Tsui, K.-L., & Tucker, G. R., “A Review of Statistical &
Fuzzy Quality Control Based on Categorical Data.” Frontiers in Statistical
Quality Control, pp. 83-89, 1997
p34. Tsui, K.-L., "Interpretations of Process Capability Indices and Some
Alternative," Quality Engineering, pp. 587-595, 1997.
p35. Tsui, K.-L., “Multivariate Robust Design Optimization,” Proceedings of
the International Conference on Computer Integrated Manufacturing,
Singapore, October 1997.
p36. Shao, J. and Tsui, K.-L., “Form Error Estimation Using Jackknife
Methods,” Statistica Sinica, pp. 119-133, 1998.
p37. Tsui, K.-L., "Alternatives of Taguchi Modeling Approach for Dynamic
Robust Design Problems," International Journal of Reliability, Quality and
Safety Engineering, pp. 115-131, 1998.
p38. Tsung, F., and Tsui, K.-L., “A Study of Integration of SPC & APC for
Process Monitoring,” Proceeding of Productivity & Quality Management
8
Frontiers VIII, Finland, 1998.
p39. Palmer, K. and Tsui, K.-L., “A Review and Interpretations of Process
Capability Indices,” Annals of Operations Research, pp. 31- 47, 1999.
p40. Tsui, K.-L., “Robust Design Optimization with Multiple Characteristics,”
International Journal of Production Research, pp. 433- 445, 1999.
p41. Tsui, K.-L., "Response Model Analysis of Dynamic Robust Design
Experiments," IIE Transactions, pp.1113-1122, 1999.
p42. Jiang, W. and Tsui, K.-L., “An Economic Model for Integrated Automatic
Process Control and Statistical Process Control,” IIE Transactions, pp.
505-513, 2000.
p43. Jiang, W., Tsui, K.-L. and Woodall, W., “A New SPC Monitoring
Method: the ARMA Chart,” Technometrics, pp. 399-410, 2000.
p44. Tsui, K.-L., “Modeling and Analysis of Dynamic Robust Design
Experiments,” Frontier in Statistical Quality Control, 2000.
p45. Loy, C., Goh, T.N., Xie, M., Tsui, K.-L., “Design of Experiments
Considering Multiple Characteristics”, ICMIT 2000.
p46. Palmer, K. and Tsui, K.-L., “Minimum Bias Latin Hypercube Designs,”
IIE Transactions, 2000.
p47. Jiang, W., & Tsui, K.-L., “Some Properties of the ARMA Charts”
Nonlinear Analysis-Theory Methods and Applications, 47 (3), 2073-2088,
2001.
p48. Yang, Z., Xie, M., Kuralmani, V., Tsui, K.-L., “Performance of Geometric
Charts with Estimated Limits,” Journal of Quality Technology, pp. 448-
458, 2002.
P49. Jiang, W., Tsui, K.-L., “Evaluation of SPC Monitoring for APC-
Controlled Processes,” Journal of Quality Technology, pp. 384-398, 2002.
p50. Jiang, W., Wu, H., Tsung, F., Nair V., & K.-L., Tsui, “PID Charts for
Process Monitoring,” Technometrics, pp. 205-214, 2002.
p51. Tsung, F. and Tsui, K.-L., “A Mean Shift Pattern Study on Integration of
SPC and APC for Process Monitoring, IIE Transactions, Vol. 35, 3, 0.231-
242, 2003.
p52. Woodall, W.H., Koudelik, R., Tsui, K.-L., Kim, K.B., Stoumbos, Z.G.,
Carvounis, C.P., “A Review and Analysis of the Mahalanobos-Taguchi
System”, Technometrics, pp. 1-29, 2003.
9
p53. Chen, V.C.P., Tsui, K.-L., Barton, R.R., Allen, J.K., “A Review of Design
and Modelling in Computer Experiments,” Statistics Handbook in
Industry, 2003.
p54. Tucker, G.R., Tsui, K.-L., & Woodall, W.H., “A Control Chart Method
for Ordinal Data”, American Journal of Mathematical & Management
Sciences, 2003.
p55. Luximon, A., Goonetilleke, R., Tsui, K.-L., “Foot Landmarking for
Footwear Customization”, Mass Customization, edited by M. Tseng, & F.
Piller, Springer, 2003.
p56. Goh, T.N., Low, P.C., Tsui, K.L., & Xie, M., “Impact of Six Sigma
Implementation on Stock Price Performance,” TQM & Business
Excellence, Vol. 14, No. 7, p. 751-781, 2003.
p.57. Xie, M., Tsui, K.-L., Goh, T.N., Cai, D.Q., “Process Capability Index for
Regularly Adjusted Processes,” International Journal of Production
Research, 2367-2377, 2002.
p.58. Alexopoulos, C., Goldsman, D., Tsui, K.-L., & Jiang, W., “SPC
Monitoring and Variance Estimation,” Frontier Statistical Quality Control
VII, 2003.
p.59. Cabrera, J., Tsui, K.-L., Goonetilleke, R., “A Scale Model for Fitting
Object Shape from Fixed Location Data,” IIE Transactions, 1099-1105,
2004.
p.60. Shu, L., Tsung, F., Tsui, K.-L., “Run Length Performance of Regression
Control Charts with Estimated Parameters”, Journal of Quality
Technology, 280-292, 2004.
p.61. Lin, Y., Mistree, F., Tsui, K.-L., & Allen, T.k., “Meta Model Validation
with Deterministic Computer Experiments”, American Institute of
Aeronautics & Astronautics, 2004.
P62. Murphy, T., Tsui, K.-L., Allen, J.K., “Compromise Design Settings for
Multiple Responses”, American Institute of Aeronautics & Astronautics,
2004.
p.63. Neo, H.Y., Xie, M., & Tsui, K.L., “Service Quality Analysis: A Case
Study of a 3PL Company, International of Logistics Systems &
Management., Vol. 1, p.64-80, 2004.
p.64. Shu, L., Tsung, F., & Tsui, K.-L., “Effects of Estimation Errors on Cause-
Selecting Chants”, IIE Transactions, 37, 559-567, 2005.
P65. Murphy, T., Tsui, K.-L., Allen, J.K., “A Review of Robust Design
Methods for Multiple Responses”, Research in Engineering Design, 16,
10
118-132, 2005.
p.66. He, B., Xie, M., Goh, T.N., Tsui, K.-L., “Control Charts Based on
Generalized Poisson Model for Count Data”, Quality Technology and
Quantitative Management, 4, 383-400, 2006.
p.67. Bae, S.J. and Tsui, K.-L., “Analysis of Dynamic Robust Design
Experiments with Explicit and Hidden Noise Variables”, Quality
Technology and Quantitative Management, 1, 55-75, 2006.
P68. Chen, V., Tsui, K.-L., Barton, R.R., Meckesheimer, M., “A Review on
Design, Modeling, and Applications of Computer Experiments”, IIE
Transactions, 38, 273-291, 2006.
p.69. Qian, Z., Jiang, W., Tsui, K.-L., “Churn Detection via Customer Profile
Modeling and Monitoring”, International Journal of Production Research,
2912-2933, 2006.
p.70. Kim, S.B., Tsui, K.-L., Borodovsky, M., “Multiple Testing in Large-Scale
Contingency Tables: Inferring Pair-Wise Amino Acid Patterns in Beta-
Sheets, 2(2), 193-217, International Journal of Bioinformatics Research
and Applications, 2006.
p71. Tsui, K.-L., Chen, V., Jiang, W., Aslandogan, A., “Data Mining Methods
and Applications”, Handbook in Applied Statistics, 2007.
p72. Jiang, W., Murphy, T., and Tsui, K.-L, “Statistical Methods for Quality
and Productivity Improvement”, Handbook in Applied Statistics, 2007.
p73. Huo, X., Kim, S.B., Tsui, K.-L., Wang, S., “FBP: A Frontier-Based Tree
Pruning Algorithm”, 18(4), 494-505, INFORMS Journal of Computing,
2006.
p74. Liu, H., Tsui, K.-L., Tsung, F., “A Nearly Optimal Order Policy to Reduce
Bullwhip Effect”, 2(1), 91-108, Quality Technology & Quantitative
Management, 2005.
p75. Kim, S.-H., Alexopoulos, C., Tsui, K.-L., & Wilson, J. “A Distribution
Free Tabular CuSum Chart for Auto-Correlated Data”, 39, 317-330, IIE
Transactions, 2007.
p76. Jiang, W., Au, T., Tsui, K.-L, “A Statistical Process Control Approach for
Business Activity Monitoring”, 39(3), 235-249, IIE Transactions, 2007.
p77. Chen, W., Xiong, Y., Tsui, K.-L., Wang, S., “Some Metrics and a
Bayesian Procedure for Validating Predictive Models in Engineering
Design”, ASME, IDTEC/CIE Conference, 2006.
p78. Bai, L., Liu, H., Tsui, K.-L., Ye, H., “Reducing Bullwhip Effect in Supply
11
Chains Using Control Variates”, 5(3), 221-241, Quality Technology and
Quantitative Management, 2007.
P79. Wang, S., Jiang, W., and Tsui, K.-L., “Adjusted Support Vector Machines
Based on A New Loss Function”, Proceeding of Workshop in Data
Mining and Machine Learning, 2007.
P80. Xiong, Y., Chen, W., Tsui, K.-L. “A New Variable Fidelity Optimization
Framework Based on Model Fusion and Objective-Oriented Sequential
Sampling”, Proceeding of ISETC/CIE 2007 ASME Conference, Las
Vegas, 2007.
p81. Murphy, T. and Tsui, K.-L., “Performance Measure Independent of
Adjustment (PERMIA): A General Performance Measure for Robust
Design”, Encyclopedia in Quality and Reliability, 2008.
p82. Murphy, T. and Tsui, K.-L., McShane-Vaughn, M., “Signal-to-Noise
Ratio: Taguchi’s Performance Measure for Robust Design”, Encyclopedia
in Quality and Reliability, 2008.
p83. Shu, L., Tsui, K.-L, and Tsung, F., “A Review of Regression Control
Charts”, Encyclopedia in Quality and Reliability, 2008.
p84. Chen, W., Xiong, Y., Tsui, K.-L., Wang, S., “A Design Driven Validation
Approach Using Bayesian Prediction”, 021101-12, Journal of Mechanical
Design, 2008.
p85. Xiong, Y., Chen, W., Tsui, K.-L. “A New Variable Fidelity Optimization
Framework Based on Model Fusion and Objective-Oriented Sequential
Sampling”, Journal of Mechanical Design, 130, 111401, 1-9, 2008.
p86. Shu, L., Jiang, W., & Tsui, K.-L., “A Weighted Cusum Chart for
Detecting Patterned Mean Shifts”, Journal of Quality Technology, 2008.
p87. Jiang, W., and Tsui, K.-L., "A Theoretical Framework and Efficiency
Study of Multivariate Statistical Process Control Charts”, IIE
Transactions, vol. 40, p. 650-663, 2008.
p88. Tsui, K.L., Chiu, W., Gierlich, P., Goldsman, D., Liu, X., Maschek, T., "A
Review of Healthcare, Public Health, and Syndromic Surveillance",
Quality Engineering, 20(4), 435-450, DOI: 10.1115/1.2809439, 2008.
p89. Wang, S., Jiang, W., and Tsui, K.L., "Adjusted Support Vector Machines
Based on A New Loss Function", Annals of Operation Research, 174(1),
83-101, DOI: 10.1007/s10479-008-0495-y, 2010.
P90. Xiong, Y., Chen, W., Tsui, K.-L., Apley, D., “A Better Understanding of
Updating Strategies in Validating Engineering Models”, Computer
Methods in Applied Mechanics and Engineering, 198, 1327-1337, 2009.
12
P91. Mei, Y., Kim, S.B., and Tsui, K.L., "Linear-mixed effects models for
feature selection in high-dimensional NMR spectra", Expert Systems with
Applications, 36(3), 4703-4708, doi:10.1016/j.eswa.2008.06.032, 2009.
P92. Tsui, K. L., Jiang, W., and Mei, Y., "CUSUM Charts for Multivariate
Monitoring and Forecasting", Encyclopedia of Operations Research and
Management Science, eorms0215, 2010.
P93. Wang, S., Chen, W., and Tsui, K.L. , "Bayesian Validation of Computer
Models", Technometrics, 51(4), 439-451, 2009.
P94. Kim, S.B., Tsui, K.L., Sukchotrat, T., and Chen, V., "A Comparison Study
and Discussion of the Mahalanobis-Taguchi System", International
Journal of Industrial and System Engineering, 4(6), 631-644, DOI:
10.1504/IJISE.2009.026768, 2009.
P95. Han, S. W., Tsui, K. L., Ariyajunya, B., and Kim, S. B., "A Comparison of
CUSUM, EWMA, and Temporal Scan Statistics for Detection of Increases
in Poisson Rates", Quality and Reliability Engineering Internationals,
26(3), 279 – 289, DOI: 10.1002/qre.1056, 2009.
P96. Kim, S.B., Huo, K., & Tsui, K.L., "A finite-sample simulation study of
cross validation in tree-based models", International Journal of
Information Technology and Management, 10:223-233, DOI
10.1007/s10799-009-0052-7, 2009.
P97. Murphy, T.E., McShane-Vaughn, M., and Tsui, K.L., "Principal
components for diagnosing dispersion in multivariate statistical process
control", Georgia Journal of Science, 67(2), 4-20, 2009.
P98. Lee, J., Alexopoulos, C., Goldsman, D., Kim, S.H., Tsui, K.L., and
Wilson, J.R., "Monitoring autocorrelated processes using a distribution-
free tabular CUSUM chart with automated variance estimation", IIE
Transactions, 41(11), 979-994, DOI: 10.1080/07408170902906035, 2009.
P99. Woodall, W. H., and Tsui, K. L., "Comments on ‘Some methodological
issues in biosurveillance’", Statistics in Medicine, 30(5), 430-433, DOI:
10.1002/sim.4047, 2011.
P100. Jiang, W., Han, S. W., Tsui, K. L., and Woodall, W. H., "Spatiotemporal
Surveillance Methods in the Presence of Spatial Correlation", Statistics in
Medicine, 30(5), 569-583, DOI: 10.1002/sim.3877, 2011.
P101. Tsui, K.L., Wong, S.Y., Jiang, W., Lin, C. J., "Recent research and
developments in temporal and spatiotemporal surveillance for public
health", IEEE Transactions on Reliability, 60(1), 49-58, DOI:
10.1109/TR.2010.2104192, 2011.
13
P102. Mei, Y., Han, S. W. and Tsui, K. L., "Early Detection of a Change in
Poisson Rate after Accounting for Population Size effects", Statistical
Sinica, 21(2) 597-624, SS-09-179, 2011.
P103. Shu, L., Jiang, W. and Tsui, K. L., "A comparison of weighted CUSUM
procedures that account for monotone changes in population size",
Statistics in Medicine, 30(7) 725-741, DOI: 10.1002/sim.4122, 2011.
P104. Andradóttir, S. and Chiu, W. and Goldsman, D. and Lee, M. and Tsui,
K.L. and Sander, B. and Fisman, D. and Nizam, A., "Reactive strategies
for containing developing outbreaks of pandemic influenza", BMC Public
Health, 11(Suppl 1):S1, DOI:10.1186/1471-2458-11-S1-S1, 2011.
p105. Su, Y., Shu, L.J., and Tsui, K.L., "Adaptive EWMA Procedures for
Monitoring Processes Subject to Linear Drifts", Computational Statistics
and Data Analysis, 55, 2819-2829, 2011.
p106. Xing, Y., Ma, E.W.M., Tsui, K.L., Pecht, M., "Battery Management
Systems in Electric and Hybrid Vehicles", Energies, 4, 1840-1857, 2011.
p107. Murphy, T., Lin, Y., Tsui, K.L., Chen, V., Allen, J., "Identifying Feasible
Design Concepts for Products with Competing Performance Requirements
by Metamodeling of Loss-Scaled Principal Components", Quality
Engineering, 23(2) 167-179, 2011.
p108. Jiang, W., Shu, L.J., Tsui, K.L., "Weighted CUSUM Control Charts for
Monitoring Poisson Processes with Varying Sample Sizes", Journal of
Quality Technology, 43(4) 346-362, 2011.
p109. Sukchotrat, T., Kim, S.B., Tsui, K.L., and Chen, V., "Integration of
Classification Algorithms and Control Chart Techniques for Monitoring
Multivariate Processes", Journal of Statistical Computation and
Simulation, 81(12) 1897-1911, 2011.
p110. Dai, Y., Baek, S.H., Garcia-Diaz, A., Yang, B., Tsui, K.L., Zhuang, J.,
"An Enhanced Engineering Perspective of Global Climate Systems and
Statistical Formulation of Terrestrial CO2 Exchanges", Theoretical and
Applied Climatology, 107, 347-359; DOI 10.1007/s00704-011-0471-3,
2012.
p111. Su, Y., Chan, L.C., Shu, L., Tsui, K.L., "Real-Time Prediction Models for
Output Power and Efficiency of Grid-Connected Solar Photovoltaic
Systems", Applied Energy, 93, 319-326, 2012.
p112. Di Maio, F., Hu, J., Tse, P., Pecht, M., Tsui, K., and Zio E., "Ensemble-
approaches for clustering health status of oil sand pumps", Expert Systems
with Applications, 39, 4847-4859, 2012.
p113. Tsui, K.L., Han, S.W., Jiang, W., Woodall, W.H., "A Review and
14
Comparison of Likelihood Based Charting Methods", IIE Transactions,
44(9) 724-743, 2012.
p114. Bai, L., Alexopoulos, C., Ferguson, M., Tsui, K.L., "A Simple and Robust
Batch-Ordering Inventory Policy Under Incomplete Demand Knowledge",
Computers and Industrial Engineering, 63(1):343-353, 2012.
p115. di Maio, F., Tsui, K.L., Zio, E., "Combining Relevance Vector Machines
and Exponential Regression for Bearing Residual Life Estimation",
Mechanical Systems and Signal Processing, 31: 405-427, 2012.
p116. Shu, L.J., Jiang, W., Tsui, K.L., "A Standardized Scan Statistic for
Detecting Spatial Clusters with Estimated Parameters", Naval Research
Logistics, 59(6):397-410, 2012.
p117. Hui, K.N., Yin C., Hui, K.S.O., Lee, J.Y., Li, M., Lee S.K., Tsui, K.L.,
Chao, C.Y.H, Kwong, C.W., "Synthesis of Co3O4 nanowire arrays
supported on Ni foam for removal of volatile organic compounds", Journal
of Nanoscience and Nanotechnology, 12(4): 3563-3566, 2012.
p118. Yuan, J., Ng, S.H., Tsui, K.L., "Calibration of Stochastic Computer
Models Using Stochastic Approximation Methods", IEEE Transactions
on Automation Science and Engineering, 10(1): 171-186, 2013.
p119. Wang, D., Tse, P.W., Tsui, K.L., "An enhanced Kurtogram method for
fault diagnosis of rolling element bearings", Mechanical Systems and
Signal Processing, 35(1): 176-199, 2013.
p120. Zhao, D., Wang, Y., Wang, X., Wei, X., Chen, S., Tsui, K.L., "Head Stack
Assembly Off-track Dynamics Investigation via Slider Protrusion Touch
Down", IEEE Transactions on Magnetics, 49(2):703-706, 2013.
p121. Wang, Y., Miao, Q., Ma, E.W.M., Tsui, K.L., Pecht, M.G., "Online
Anomaly Detection for Hard Disk Drive Based on Mahalanobis Distance",
PHM Special Section of IEEE Transactions on Reliability, 62(1): 136-145,
2013.
p122. Cheng, V.C.C., Tai, J.W.M., Wong, Z.S.Y., Chen, J.H.K., Pan, K.B.Q.,
Hai, Y., Ng, W.C., Chow, D.M.K., Yau, M.C.Y., Chan, J.F.W., Wong,
S.C.Y., Tse, H., Chan, S.S.C., Tsui, K.L., Chan, F.H.W., Ho, P.L., Yuen,
K.Y., "Transmission of methicillin-resistant staphylococcus aureus in the
long term care facilities in Hong Kong ", BMC Infectious Diseases,
13:205, 2013.
p123. Chen, N., Tsui, K.L., "Condition Monitoring and Remaining Useful Life
Prediction Using Degradation Signals: Revisited", IIE Transactions,
45(9):939-952, 2013.
p124. Xing, Y., Ma, E.W.M., Tsui, K.L., Pecht, M., "An Ensemble Model for
15
Predicting the Remaining Useful Performance of Lithium-ion Batteries",
Microelectronics Reliability special issue: Enabling Technologies for
Sustainable Battery: Advances in Battery Reliability, 53(6):811-820, 2013.
p125. Huang, W., Shu, L., Jiang, W., Tsui, K.L., "Evaluation of Run-Length
Distribution for CUSUM Charts under Gamma Distribution", IIE
Transactions, 45(9):981-994, 2013.
p126. Shu, L., Huang W., Su, Y., Tsui, K.L., "Computation of the Run Length
Percentiles of CUSUM Control Charts Under Changes in Variances",
Journal of Statistical Computation and Simulation, 83(7): 1238-1251,
2013.
p127. Xu, M., Wong, T.C., Wong, S.Y., Chin, K.S., Tsui, K.L., Hsia, R.Y.,
"Delays in service for non-emergent patients due to arrivals of emergent
patients in the emergency department: a case study in Hong Kong",
Journal of Emergency Medicine, 45(2): 271-280, 2013.
p128. Wang, Y., Jin, X., Chen, S., Wei, X., Tsui, K.L., "Effect of low-frequency
vibration in z-direction (out-of-plane) on slider dynamics", IEEE
Transactions on Magnetics, 49(9): 4977-4981; doi:
10.1109/TMAG.2013.2252359, 2013.
p129. Xing, Y., He W., Pecht, M., Tsui, K.L., "State of charge estimation of
lithium-ion batteries using the open-circuit voltage at various ambient
temperatures", Applied Energy, 113: 106-115, 2014.
p130. Jiang, W., Shu, L., Zhao, H.H., Tsui, K.L., "CUSUM Procedures for
Health Care Surveillance", Quality and Reliability Engineering
International, 29(6): 883-897, 2013.
p131. Ye, Z.S., Tsui, K.L, Wang, Y., Pecht, M., "Degradation data analysis
using Wiener processes with measurement errors", IEEE Transactions on
Reliability, 62(4): 772-780, 2013.
p132. Wang, Y., Ma, E.W.M., Chow, T.W.S., Tsui, K.L., "A Two-step
Parametric Method for Failure Prediction in Hard Disk Drives", IEEE
Transactions on Industrial Informatics, 10(1): 419-430, 2014.
p133. He, F., Shu, L., Tsui, K.L., "Adaptive CUSUM Charts for Monitoring
Linear Drifts in Poisson Rates", International Journal of Production
Economics, 148: 14-20, 2014.
p134. Ng, S.S.Y., Xing, Y., Tsui, K.L., "A naive Bayes model for robust
remaining useful life prediction of lithium-ion battery", Applied Energy,
118:114-123, 2014.
p135. Ng, S.S.Y., Tse, P.W., Tsui, K.L., "A One-Versus-All Class Binarization
Strategy for Bearing Diagnostics of Concurrent Defects", Sensors,
14:1295-1321, 2014.
16
p136. Tsui, K.L., Wong, S.Y., Goldsman, D., Edesess, M., "Tracking Infectious
Disease Spread for Global Pandemic Containment", IEEE Intelligent
Systems, 28(6):60-64, 2013.
p137. Park, Y., Baek, S.H., Kim, S.H., Tsui, K.L., "Statistical Process Control
Based Intrusion Detection and Monitoring", Quality and Reliability
Engineering International, 30(2): 257-273, 2014.
p138. Lin, C.J, Tsui, K.L., Lin, C.Y., "A Spatial-EWMA Framework for
Detecting Clustering", Quality and Reliability Engineering International,
30(2): 181-189, 2014.
p139. Wang, Y., Wei, X., Tsui, K.L., Chow, T.W.S., "Tribological degradation
of head-disk interface in hard disk drives under accelerated wear
condition", IEEE Transactions on Magnetics, 50(3):3301007, 2014.
p140. Jin, X., Chow, T.W.S., Tsui, K.L., "Online Anomaly Detection of
Brushless DC Motor Using Current Monitoring Technique", International
Journal of Performability Engineering, 10(3):263-271, 2014.
p141. Wang, Y., Ye, Z.S., Tsui, K.L., "Stochastic evaluation of magnetic head
wears in hard disk drives", IEEE Transactions on Magnetics, 50(5):1-7,
2014.
p142. Shu, L., Su, Y., Jiang, W., Tsui, K.L., "A Comparison of Exponentially
Weighted Moving Average Based Methods for Monitoring Increases in
Incidence Rate with Varying Population Size", IIE Transactions, 46(8):
798-812, 2014.
p143. Han, S.W., Jiang W., Shu L., Tsui, K.L., "A Comparison of Likelihood-
based Spatiotemporal Monitoring Methods Under Non-homogeneous
Population Size", Communications in Statistics - Simulation and
Computation, 44(1):14-39; DOI:10.1080/03610918.2013.763981, 2014.
p144. Li, M., Lu, S., Guo, J., Tsui, K.L., "Study on Flame Spread over Aviation
Kerosene and Diesel", Advanced Materials Research, 1016: 587-591,
2014.
p145. Shu L, Ling MH, Wong SY, Tsui KL, "Spatial Clustering in Public
Health: Advances and Challenges. In: Yang, H., Kundakcioglu.
Healthcare Intelligence: Turning Data into Knowledge", IEEE Intelligent
Systems, 29(3):65-68, 2014.
p146. Zhao H, Shu L, Tsui KL, A Window-Limited Generalized Likelihood
Ratio Test for Monitoring Poisson Processes with Linear Drifts, Journal of
Statistical Computation and Simulation, 85(15),
DOI:10.1080/00949655.2014.945933, 2014.
17
p147. Li M, Lu S, Guo J, Chen R, Tsui KL, "Flame spread over n-butanol at
sub-flash temperature in normal and elevated altitude environments",
Journal of Termal Analysis and Calorimetry, 119(1):401-409, 2015.
p148. Li M, Lu S, Guo J, Chen R, Tsui KL, "Initial fuel temperature effects on
flame spread over aviation kerosene in low- and high-altitude
environments", Fire Technology, DOI:10.1007/s10694-014-0395-4, 2014.
p149. Li M, Lu S, Guo J, Wu X, Tsui KL, "Effects of pool dimension on flame
spread of aviation kerosene coating on a metal substrate", International
Journal of Heat and Mass Transfer, 84:54-60, 2015.
p150. Ling MH, Tsui KL, Balakrishnan N, Accelerated Degradation Analysis for
the Quality of a System Based on the Gamma Process, IEEE Transactions
on Reliability, 64(1):463-472, 2015.
p151. Ng SSY, Cabrera J, Tse PWT, Chen AH, Tsui KL, Distance-based
analysis of dynamical systems reconstructed from vibrations for bearing
diagnostics, Nonlinear Dynamics, 80(1-2):147-165; DOI: 10.1007/s11071-
014-1857-4, 2015.
p152. Tang J, Brouste A, Tsui KL, Some improvements of wind speed Markov
chain modeling, Renewable Energy, 81:52-56, 2015.
p153. Ye ZS, Chen N, Tsui KL. A Bayesian Approach to Condition Monitoring
with Imperfect Inspections. IEEE Transactions on Reliability. 2015; 31(3):
513-522.
p154. Tsui KL, Chen N, Zhou Q, Hai Y, Wang W, Prognostics and Health
Management: A Review on Data Driven Approaches, Mathematical
Problems in Engineering 2015, (2015).
p155. Liu S, Lo S, Tsui K, Wang W, Modeling Movement Direction Choice and
Collision Avoidance in Agent-Based Model for Pedestrian Flow, Journal
of Transportation Engineering, 141(6), 2015.
p156. Wang Y, Wei XF, Liang XH, Yin SY, Zi YY, Peng YZ, Tsui KL, The
Instability of Angstrom-scale Head-disk Interface Induced by
Electrostatic Force, IEEE transactions on magnetics, 51(11), 2015.
p157. Wang D, Tsui KL, Tse PW, Zuo M, Principal components of super-high
dimensional statistical features and support vector machine for improving
identification accuracies of different gear crack levels under varying
working conditions, Shock and Vibration, 2015.
p158. Lin MY, Chin KS, Tsui KL, Wong TC, Genetic based discrete particle
swarm optimization for elderly Day care center timetabling, Computers
and Operations Research, 65,125-138, 2015.
18
p159. Wang Y., Wei H.F., Zi Y.Y., Tsui K.L., In Situ Measurement of Seeking
Speed and Seeking Induced Head-Disk Interface Instability in Hard Disk
Drives, Shock and Vibration, 501,989854, 2015.
p160. Lee M.L., GOLDSMAN D., KIM E.H., TSUI K.L., Spatiotemporal
biosurveillance with spatial clusters: control limit approximation and
impact of spatial correlation, IIE Transactions, 46(8), 2014.
p161. Zhao HH, Shu LJ, Jiang W, Tsui KL, An Adaptive CUSUM Chart for
Monitoring Poisson Rates with Increasing Population Sizes, European
Journal of Industrial Engineering, 9.5,2015:692-715.
p162. Yang F.F., Xing Y.J., Wang D., Tsui K.L., A comparative study of three
model-based algorithms for estimating state-of-charge of lithium-ion
batteries under a new combined dynamic loading profile, Applied
Energy164(2016): 387-399.
p163. Wang D., Tsui K.L., Zhou Q., Novel Gauss-Hermite integration based
Bayesian inference on optimal wavelet parameters for bearing fault
diagnosis, Mechanical Systems and Signal Processing, 72(2016):80-91.
p164. Wang Y., Wei X.F., Liang X.H., Zi Y.Y., Tsui K.L., Slider Dynamics and
Wear Behaviors at Sub-Nano-Clearance HeadDisk Interface, IEEE
Transaction on Magnetics, 52.1(2016):1-9.
p165. Wang Y., Wei X.F., Liang X.H.,Yin S.Y., Zi Y.Y., Tsui K.L., An In-situ
Measurement Method for Electric Potential at Head-disk Interface Using a
Thermal Asperity Sensor, IEEE Transaction on Magnetics, 52.1(2016):1-6.
p166. Y. Wang, Y. Peng, Y. Z, X. Jin, K. L. Tsui, “A Two-stage Data-driven
Based Prognostic Approach for Bearing Degradation Problem,” IEEE
Transactions on Industrial Informatics, online, doi:
10.1109/TII.2016.2535368.
p167. Wong, Z. S. Y., Goldsman, D., & Tsui, K. L.. Economic Evaluation of
Individual School Closure Strategies: The Hong Kong 2009 H1N1
Pandemic. PloS one, 2016,11(1), e0147052.
P168. Ling M.H., Wong S.Y., Tsui K.L., Efficient heterogeneous sampling for
stochastic simulation with an illustration in healthcare applications,
Communications in Statistics - Simulation and Computation,
DOI:10.1080/03610918.2014.977914, 2015.
Accepted
A1. Chen H, Goldsman D, Schmeiser,BW, Tsui KL, Symmetric X-bar Charts:
19
Sensitivity to Nonnormality and Control-Limit Estimation,
Communication in Statistics - Simulation and Computation,
DOI:10.1080/03610918.2014. 963615,2015.
A2. Shen X, Tsui KL, Woodall WH, Zou C, Self-starting control scheme for
Poisson count data, Technometrics, in press, 2015.
A3. Zhao Y, Shrivastava AK, Tsui KL, Imbalanced Classification by Learning
Hidden Data Structure, IIE Transactions, in press, 2015.
A4. Yang W.A., Zhou Q., Tsui K.L., Differential evolution-based feature
selection and parameter optimisation for extreme learning machine in tool
wear estimation, International Journal of Production Research,
doi:10.1080/00207543.2015.1111534, in press, 2015.
A5. Huang W.P. ,Shu L.J., Woodall W.H. , Tsui K.L., CUSUM Procedures
with probability control limits for monitoring processes with variable
sample sizes, IIE Transactions, editing, 2016.
A6. Huang W.P., Shu L, Cao J, Tsui KL. Probability Distribution of CUSUM
Charting Statistics. IIE Transactions, in press, 2015.
A7. Lin M.Y., Chin K.S., Wang X.J., Tsui K.L., The Therapist Assignment
Problem in Home Healthcare Structures, Expert Systems With
Applications, in press, 2016.
A8. Tsui, K. L., & Zhao, Y. (2016). Discussion of ‘Analyzing Behavioral Big
Data: Methodological, Practical, Ethical, and Moral Issues'. Quality
Engineering, in press, 2016
A9. Xu Q.N., Tsui K.L., Jiang W., Guo H.N., A Hybrid Approach for
Forecasting Patient Visits, Quality and Reliability Engineering
International, accepted, 2016.
A10. Design for Sequential Follow-up Experiments in Computer Emulations,
accepted, Technometrics.
Submitted
S1. Jiang, W., Au, T., Tsui, K.-L., Xie, M., “Process Monitoring with
Univariate & Multivariate C-charts”, submitted.
S2. Huo, X., Chen, J., Wang, S., Tsui, K.-L., “Support Vector Tree:
Simultaneous Maximal Margin & Maximal Purity”, submitted.
S3. Shu, L.J., Jiang, W., and Tsui, K.L., "An Updated Exponentially Weighted
Moving Average Methods for Modeling and Monitoring Increases in
Incidence Rate", submitted.
20
S4. Tsui, K.-L., Chiu, W., Goldsman, D., Han, S., Kim, M., Liu, X., Lo, S.,
Woodall, W.H., “A Two-Step EWMA Chart for Disease Surveillance”,
submitted to Advances in Disease Surveillance.
S5. Hung, Y. Lo, S., Tsui, K.-L., “High Dimension, Low sample Size
Logistics Mixed Model”, submitted.
S6. Shu, L., Jiang, W. and Tsui, K. L., “Weighted CUSUM Procedures for
Surveillance of Health Events with Effects of Inhomogeneous Population
Sizes”, submitted.
S7. Shu, L., Jiang, W. and Tsui, K. L., “A Spatial Scan Statistic”, submitted.
S8. Lin, C.J., Jiang, W., Tsui, K.L., "A uniform power likelihood ratio test and
applications in spatial cluster detection", submitted.
S9. Shen X, Yu Y, Tsui KL, Yan H. Optimal Capacity Allocation in Mass-
Casualty Incidents with Multiple Hospitals. Operations Research. 2014;
submitted.
S10. Shen X, Wong ZSY, Ling MH, Goldsman D, Tsui KL, Comparison of
Disease Transmission Algorithms, PLoS ONE, submitted, 2014.
S11. Wong ZSY, Lit ACH, Leung SY, Chin KS, Tsui KL, The Influence of
Subsequent Treatments and Reassessment Processes after the First
Physician Visit on AED Performance Improvement: A Simulation Study ,
WestJEM, submitted, 2014.
S12. Wong ZSY, Xu J, Guo H, Goldsman D, Tsui KL, An Overview of Aging
Populations and Long-term Care Systems in Developed Countries, BMC
Health Services Research, submitted, 2014.
S13. Liu SB, Lo SM, Wang WL, Tsui KL, Comparison of Lattice-Gas model
and Agent-Based continuous model on modeling bidirectional pedestrian
flow, Physica A, submitted, 2014.
S14. Li M, Lu S, Guo J, Chen R, Tsui KL, Precursor flame characteristics of
flame spread over aviation kerosene, Journal of Thermal Science, Under
review, 2014.
S15. Zhao Y, Shrivastava AK, Tsui KL, Regularized Gaussian Mixture Model
for High-dimensional Clustering, submitted, 2015.
S16. Zhao Y, Tsui KL, Shrivastava AK, Wong SY, Decomposition based
logistic regression on methicillin-resistant staphylococcus aureus (MRSA)
patient prognosis, , in preparation, 2014.
S17. Ling M.H., Wong S.Y., Tsui K.L., Stochastic Disease Transmission model
to Evaluate Attack Rate During Nosocomial, in preparation.
21
S18. C.J. Yan, J.F. Tang, K.L. Tsui and B.W. Jiang, Joint capacity and
appointment scheduling problem with general distribution service time,
IEEE Transactions on automation science and engineering, in preparation,
2015.
S19. Wong S.Y., Chin K.S., Xu J.P., Tsui K.L., Performance assessment
framework of the emergency department: A review, Hospital Practice,
Under review, 2015.
S20. Wong Z.Y., Jiang S.C., Chin K.S., Tsui K.L., A Systematic Review of
the Modelling of Patient Arrivals in Emergency Departments,
Emergency Medicine Journal, Under review, 2015.
S21. Wong Z.Y., Xu J.P., Goldsman D., Tsui K.L., A Comparison of Long-
term Care Systems in Developed Countries , in preparation, 2015.
S22. Wang D., Zhou Q., Tsui K.L., The upper bound of the dimensionless
smoothness index: revisited, Mechanical Systems and Signal Processing,
Under review, 2016.
S23. Wang D., Yang F.F., Tsui K.L., Zhou Q., Suk J.B., Remaining Useful Life
Prediction of Lithium-ion Batteries based o Spherical Cubature Particle
Filter, IEEE Transactions on Instrumentation and Instrument, Under
review, 2015.
S24. Tse P.W., Wang D., Chen H., Tsui K.L., State space formulation of
nonlinear vibration responses collected from a dynamic rotor-bearing
system: Extensions of bearing diagnostics to bearing prognostics,
Mechanical Systems and Signal Processing, Under review, 2016.
S25. Wang D., Zhao Y., Yang F.F., Tsui K.L., Nonlinear-Drifted Brownian
Motion with Multiple Hidden States and Its Application to Prognostics of
Lithium-Ion Batteries, Reliability Engineering and System Safety, Under
review, 2016.
S26. Wang D., Yang F.F., Zhao Y., Tsui K.L. , Remaining Useful Life
Prediction of Lithium-ion Batteries at Different Discharge Current Rates,
Reliability Engineering and System Safety, Under review, 2016.
C. Other Publications
1. Keny, R. and Tsui, K.-L., "Circuit Improvement Using Designed
Simulation Experiments," AT&T Internal Memorandum, 1988.
2. Tsui, K.-L., "An Automatic Experiment Planner for Robust Design,"
AT&T, Internal Memorandum, 1989.
22
3. Feinberg, E. B. and Tsui, K.-L. "Features and Requirements for the
Experimental Design and Statistical Analysis Modules of ATOMS,"
AT&T Technical Memorandum, 1989.
4. Sun, X. D. and Tsui, K.-L. "Consistency of Bias-Corrected Estimator in
Truncated Regression," Technical Report, University of Waterloo, 1990.
5. Kacker, R.N., Cook, H., Hoerl, R., Hooper, J., Lee, T., Lavery, J.E.,
Morgan, C., Nair, V., Oser, H.J. and Tsui, K.-L., "Improving the Quality
of Environmental Data and Regulatory Decisions at the EPA Through
TQM," Panel on Statistical Quality Control Procedures Report, National
Research Council, Washington, D.C., 1993.
6. Lee, S. Y. and Tsui, K.-L., "Some Remarks on Multiple Group Covariance
Structure Analysis," Proceedings of the American Statistical Association,
Section on Statistical Computing, p. 102, 1982.
7. Tsui, K.-L. and Liu, L., "Robust Design of a High Dimensional IC Process
Through Simulation Experiments," Proceedings of the
SEMICON/KOREA 90 Technical Symposium, 1990.
8. Shoemaker, A. C. and Tsui, K.-L., "Response Model Analysis for Robust
Design Experiments", Proceedings of the American Statistical
Association, Section on Physical and Engineering Sciences, 1992.
9. Tsui, K.-L., "New Experimental Design Methods for Quality
Improvement,"Proceedings of the 1993 NSF Design and Manufacturing
Systems Conference, Charlotte, North Carolina, pp. 1247-1251, 1993.
10. Dowling, M. M., Griffin, P.M., Tsui, K.-L., and Zhou, C., "Statistical
Issues in Geometric Tolerance Verification Using Coordinate Measuring
Machines," Proceedings of the American Statistical Association, Section
on Quality and Productivity, Knoxville, 1993.
11. Tsui, K.-L., "New Statistical Methods for Quality and Productivity
Improvement,”Proceedings of the 1994 NSF Design and Manufacturing
Systems Conference, MIT, Massachusetts, 1994.
12. Woodall, W.H., Tsui, K.-L. and Tucker, G.R., “A Review of Statistical
and Fuzzy Quality Control Charts Based on Categorical Data,” Proceeding
of 5th International Workshop on Intelligent Statistical Quality Control,
1995.
13. Tsui, K.-L., “Robust Parameter Design with Dynamic and Multiple
Characteristics,” Proceeding of the ASA Conference, Q&P Section, Los
Angeles, 1997.
14. Tsui, K.-L., An Alternative of Taguchi’s Approach for Dynamic Robust
23
Design,” Proceeding of International Conference on Quality & Reliability,
Hong Kong, September 1997.
15. Tsui, K.-L., “A Comparison of Modeling Approaches for Dynamic Robust
Design,” Proceeding of International Worskhop on Intelligent Statistical
Quality Control, 1998, Germany.
16. Jiang, W and Tsui, K.-L., “An Economical Model of APC & SPC Control
Charts,” Proceeding of ASA Conference, Q&P Section, Dallas, 1998.
17. Jiang, W., Tsui, K.-L., and Woodall, W.H., “An Autocorrelated Moving
Average Chart for Statistical Process Contol”, Proceeding of ASA
Conference, Q&P Section, Baltimore, 1999.
18. Liu, X., Chen, W., Tsui, K.-L , “Regression Model for Computer Model
Validation with Functional Responses’’, ASME DETC Conference, 2008.
19. Tsui, K. L., Goldsman, D., Jiang, W., and Wong, S. Y., "Recent Research
in Public Health Surveillance and Health Management", 2010 Prognostics
& System Health Management Conference (PHM-2010 Macau), pp. 1-7,
2010.
20. Xie, Y.J., Tsui, K.L., Xie, M., Goh, T.N., "Monitoring time-between-
events for health management", Prognostics and Health Management
Conference, 2010. PHM'10 (Jan 2010 Macau), 1-8, 2010.
21. Andradóttir, S., Chiu, W., Goldsman, D., Lee, M.L., Tsui, K.L., Fisman,
D., Sander, B., Nizam, A., "Simulation of Strategies for Containing
Pandemic Influenza", 2010 Winter Simulation Conference (WSC'10 5-8
Dec 2010), p. 2221-2229, 2010.
22. Xing, Y., Williard, N., Tsui, K.L., Pecht, M., "A comparative review of
prognostics-based reliability methods for Lithium batteries", Prognostics
and System Health Management Conference (PHM-Shenzhen), 2011, 1-6,
2011.
23. Wong S.Y., Hai, Y., Cheng, V.C.C., Yuen, K.Y., Tsui, K.L.,
"Prognostication of Methicillin-resistant Staphylococcus aureus (MRSA)
Patient Survival", 2011 Prognostics & System Health Management
Conference. PHM'11 (24-25 May 2011 Shenzhen), MU3177, 2011.
24. Di Maio, F., Ng, S.Y.S., Tsui, K.L., and Zio E., "Naïve Bayesian
Classifier for On-line Remaining Useful Life Prediction of Degrading
Bearings", Special Session on System Health Monitoring, Fault Diagnosis
and Prognosis, MMR 2011 (20-24 June 2011 Beijing), 2011.
25. Hai, Y., Cheng, V.C.C., Wong, S.Y., Tsui, K.L., Yuen, K.Y., "Logistic
Regression Analysis for Predicting Methicillinresistant Staphylococcus
Aureus (MRSA) In-hospital Mortality", The First International
24
Symposium on System Informatics and Engineering. ISSIE'2011 (11-13
Jul 2011 Qingdao), 2011.
26. Xing, Y., Zhang, S., Pecht, M., Tsui, K.L., "Research on Prognostics-
based Reliability for Lithium Batteries", The First International
Symposium on System Informatics and Engineering. ISSIE'2011 (11-13
Jul 2011 Qingdao), 2011.
27. Xing, Y., Miao, Q., Tsui, K.L., Pecht, M., "Prognostics and health
monitoring for Lithium-ion battery", IEEE International Conference on
Intelligence and Security Informatics (ISI-Hong Kong), 2011, 242-247,
2011.
28. Hu, J., Shu, L., Tse, P.W., Tsui, K.L., "A comparison of EWMA-type
charts under linear drifts in Poisson means", The 2011 IEEE International
Conference on Quality and Reliability ICQR (14-17 Sep 2011Thailand),
297-301, 2011.
29. Wong, S.Y., Tsui K.L., Chin, K.S., Xu, M., "A simulation study to
achieve healthcare service quality improvement in accident & emergency
department (AED)", The 2011 IEEE International Conference on Quality
and Reliability ICQR (14-17 Sep 2011Thailand), 259-263, 2011.
30. di Maio, F., Zio, E., Pecht, M., Tse, P.W., Tsui, K.L., "Ensemble of
unsupervised fuzzy C-Means classifiers for clustering health status of oil
sand pumps", European Safety and Reliability Conference ESREL 2011
(10-22 Sep 2011 France), , 2011.
31. Xu, M., Wong, T.C., Chin, K.S., Wong, S.Y., Tsui, K.L., "Modeling
patient visits to Hong Kong Accident and Emergency Department", The
IEEE International Conference on Industrial Engineering and Engineering
Management IEEM 2011 (6-9 Dec 2011), , 2011.
32. Hai, Y., Pan, B., Wong, S.Y., Cheng, V.C., Yuen, K.Y. Tsui, K.L., "Cox
model and model-based partition tree for the study of MRSA acquisition
in RCHE and hospital", International Symposium on Public Health and
Environmental Protection PHEP (28-30 May 2012 Macau), , 2012.
33. Zhao, H., Shu, L., Jiang, W., Tsui, K.-L., "A comparison of detection
probability of CUSUM procedures under increasing population sizes ",
2012 International Conference on Biomedical Engineering and
Biotechnology, iCBEB 2012; Macau; China; 28-30 May 2012, 1152-1155,
2012.
34. Wang, Y., Ma., E.W.M., Tsui, K.L., Pecht, M., "A Fusion Approach for
Anomaly Detection in Hard Disk Drives", 2012 Prognostics & System
Health Management Conference. PHM2012 (23-25 May 2012 Beijing),
MU3279, 2012.
25
35. Cao, J. Pan, K.B., Tsui, K.L., Wong, S.Y., "Disease surveillance by
clustering based on minimal internal distance", 2012 Prognostics &
System Health Management Conference. PHM2012 (23-25 May 2012
Beijing), article no. 6228842, 2012.
36. Hai, Y., Tsui, K.L., Zuo, M.J., "Gear Crack Level Classification Based on
Multinomial Logit Model and Cumulative Link Model", 2012 Prognostics
& System Health Management Conference. PHM2012 (23-25 May 2012
Beijing), 1-6, 2012.
37. Xing, Y., Ma, E.W.M., Tsui, K.-L., Pecht, M., "A case study on battery
life prediction using particle filtering", 2012 Prognostics & System Health
Management Conference. PHM2012 (23-25 May 2012 Beijing), article
no. 6228847, 2012.
38. Xing, Y., Ma, E.W.M., Tsui, K.-L., Pecht, M., "Influence of parameter
initialization on battery life prediction for online applications ", 2012 13th
International Conference on Electronic Packaging Technology and High
Density Packaging, ICEPT-HDP 2012; Guilin; China; 13-16 August 2012,
1042-1046, 2012.
39. Tse, P.W., Hu, J., Shrivastava, A.K., Tsui, K.L., "A Multivariate Control
Chart for Detecting a Possible Outbreak of Disease", 7th World Congress
on Engineering Asset Management (WCEAM 2012); South Korea, 8-12
Oct 2012, 2012.
40. Hai, Y., Tang J., Tsui, K.L., "Estimating the remaining useful life of Li-
ion batteries with a Bayesian updating model", The IEEE International
Conference on Industrial Engineering and Engineering Management
IEEM 2012, (10-13 Dec 2012 Hong Kong), 2254-2258, 2012.
41. Ng, S.S.Y., Tsui, K.L., "Robust remaining useful life prediction for Li-ion
batteries with a naive Bayesian Classifier", The IEEE International
Conference on Industrial Engineering and Engineering Management
IEEM 2012, (10-13 Dec 2012 Hong Kong), 2254-2258, 2012.
42. Chan, Y.H., Tsui, K.L., Wong, S.Y., "Synthetic population - a case study
of Hong Kong population", The IEEE International Conference on
Industrial Engineering and Engineering Management IEEM 2012, (10-13
Dec 2012 Hong Kong), 2113-2116, 2012.
43. Guo, H. Xu, J., Tsui, K.L., “An overview and comparison of healthcare
systems in developed countries”, Spring Research Conference on Systems
Engineering and Management Science 2014; SRC-SEMS2014 (16-17
May 2014 Shenzhen), 2254-2258, 2014.
44. Ng, S.S.Y., Cabrera, J., Tsui, K.L., “An application of dynamical system
reconstruction from vibrations for bearing diagnostics and prognostics”,
Spring Research Conference on Systems Engineering and Management
26
Science 2014; SRC-SEMS2014 (16-17 May 2014 Shenzhen), 1691-1695,
2014.
45. Zhao, Y., Tsui, K.L., Shrivastava, A.K., Wong, S.Y., “Decomposition
based logistic regression on methicillin-resistant staphylococcus aureus
(MRSA) patient prognosis”, Spring Research Conference on Systems
Engineering and Management Science 2014; SRC-SEMS2014 (16-17
May 2014 Shenzhen), SRC12, 2014.
46. Yang, F.F., Wong, S.Y., Tsui, K.L., “A restructured work shift schedule
discussion for emergency department: a case study in Hong Kong”, Spring
Research Conference on Systems Engineering and Management Science
2014; SRC-SEMS2014 (16-17 May 2014 Shenzhen), SRC31, 2014.
47. Lin, M.Y., Chin, K.S., Tsui, K.L., “Operations improvement in home
health care: the patient assignment problem”, Spring Research Conference
on Systems Engineering and Management Science 2014; SRC-SEMS2014
(16-17 May 2014 Shenzhen), SRC24, 2014.
48. Chan, Y.H., Wong, S.Y., Tsui, K.L., “Modeling influenza pandemic in
Hong Kong”, Spring Research Conference on Systems Engineering and
Management Science 2014; SRC-SEMS2014 (16-17 May 2014
Shenzhen), SRC35, 2014.
49. Xu, Q.N., Wong, S.Y., Tsui, K.L., “A review of modeling influenza
epidemics and pandemics”, Spring Research Conference on Systems
Engineering and Management Science 2014; SRC-SEMS2014 (16-17
May 2014 Shenzhen), SRC04, 2014.
50. Wang, Y., Cao, H., Zi, Y., Wei, X., Tsui, K.L., “An Accelerated Wear
Model for Magnetic Heads with Respect to Sensory Data”, 2014
Prognostics and System Health Management Conference; IEEE PHM
2014 (24-27 Aug 2014 Zhangjiajie, Hunan, China), SRC43, 2014.
51. Shrivastava, A.K., Cao, J., "A decomposition approach to imbalanced
classification", The First International Symposium on System Informatics
and Engineering. ISSIE'2011 (11-13 Jul 2011 Qingdao), SRC21, 2011.
52. Edesess, Michael, Tsui, Kwok L., Fabbri, Carol, Peacock, George, "The 3
Simple Rules Of Investing ", Berrett-Koehler Publishers, 1-240, 2014.
53. Edesess, Michael, Tsui, Kwok L., "How Many Monkeys Does It Take To
Find A Successful Strategy", Advisor Perspectives, 1-6, 2013.
54. Edesess, Michael, Tsui, Kwok L., "Why Does The U.S. Have High-Cost
Low-Quality Healthcare?", Advisor Perspectives, 1-6, 2013.
D. Conference Presentations
27
1. Tsui, K.-L., and Wu, C. F. J., "Nonparametric Inference in Truncated
Regression," Institute of Mathematical Statistics Annual Meeting, Las
Vegas, Nevada, August 7, 1985. (Invited)
2. Tsui, K.-L., Shoemaker, A. C. and Leon, R., "Discussion on Signal to
Noise Ratios, Performance Criteria and Transformation," American
Statistical Association Annual Meeting, San Francisco, California, August
18, 1987. (Invited)
3. Tsui, K.-L., "An Empirical Two-Step Procedure for Robust Design,"
TIMS/ORSA Joint National Conference, Washington, D.C., April 27,
1988. (Invited)
4. Tsui, K.-L., Keny, R., and Beale, R., "Circuit Improvement Using
Designed Simulation Experiments," American Statistical Association
Annual Meeting, New Orleans, Louisiana, August 20, 1988. (Invited)
5. Tsui, K.-L. and Shoemaker, A. C., "An Automatic Experiment Planner for
Robust Design," Design, Quality and Reliability Research Conference,
Murray Hill, New Jersey, October 6, 1988. (Invited)
6. Shoemaker, A. C., Tsui, K.-L. and Wu, C. F. J., "Economical
Experimentation Methods for Robust Parameter Design," American
Statistical Association Annual Meeting, Washington, D.C., August, 1989.
(Invited)
7. Tsui, K.-L. and Shoemaker, A. C., "An Automatic Experiment Planner for
Robust Design," Fall Technical Conference, Houston, Texas, October 26,
1989. (Invited)
8. Kacker, R. N. and Tsui, K.-L., "Interaction Graphs: Graphical Aids for
Planning Experiments," Fall Technical Conference, Journal of Quality
Technology Session, Houston, Texas, October 26, 1989. (Invited)
9. Tsui, K.-L., Shoemaker, A. C. and Wu, C. F. J., "Beyond Taguchi: An
Overview of Improved Statistical Methods for Robust Product and Process
Design," American Statistical Association Winter Conference, Orlando,
Florida, January 4, 1990. (Invited)
10. Tsui, K.-L., "Robust Design: Improving Product and Process Design
Through Efficient Experimentation," Fifth International Electronics
Assembly Conference, Scottsdale, Arizona, February, 1990. (Invited)
11. Tsui, K.-L. and Hooper, J. H., "Robust Parameter Design Through
Efficient Experimentation," SEMATECH Statistical Methods Workshop,
Austin, Texas, February, 1990 (Invited)
12. Liu, L. and Tsui, K.-L., "Design Optimization for an Amplifier with Worst
Case Concerns," Designing for Quality Workshop, Boulder, Colorado,
28
April, 1990. (Invited)
13. Tsui, K.-L. and Hooper, J. H., "Recent Advances in Statistical Methods in
Designing for Quality," Designing for Quality Workshop, Boulder,
Colorado, April, 1990. (Invited)
14. Tsui, K.-L. and Liu, L., "Robust Parameter Design Through Computer
Experiments," American Statistical Association Annual Meeting,
Anaheim, California, August, 1990. (Invited)
15. Tsui, K.-L. and Liu, L, "Robust Parameter Design Through Computer
Experiments," TIMS/ORSA Joint National Conference, Philadelphia,
Pennsylvania, October, 1990. (Invited)
16. Tsui, K.-L., "Simple Tools for Planning Experiments: Interaction Graphs
and Confounding Tables", American Statistical Association Annual
Meeting, Atlanta, Georgia, August, 1991. (Invited)
17. Tsui, K.-L. and Shoemaker, A.C., "Response Model Analysis for Robust
Design Experiments," American Statistical Association Annual Meeting,
Boston, Massachusetts, August, 1992. (Invited)
18. Tsui, K.-L., Dowling, M., Griffin, P., and Zhou, C., "Statistical Problems
in Geometric Tolerance Verification Using Coordinate Measures
Machines," Quality and Productivity Research Conference, Knoxville,
Tennessee, 1993 (Invited).
19. Tsui, K.-L., Dowling, M., Griffin, P., and Zhou, C., "Statistical Issues in
Geometric Tolerance Verification Using CMM," Research Conference on
Statistics in Industry and Technology, Chapel Hill, North Carolina, 1994
(Invited).
20. Tsui, K.-L., “A Critical Look at Taguchi’s Modeling Approach,” 4th
International Conference of ICSA, Beijing, 1995.
21. Tsui, K-L. and Shao, J., “Form Tolerance Evaluation by Jackknife,”
ASME Conference, Atlanta, 1996.
22. Tsui, K.-L., “Response Model Analysis of Dynamic Robust Design
Experiments, ASA Annual Conference, Los Angeles, August 1997.
23. Tsui, K.-L., “An Alternative of Taguchi’s Approach for Robust Design,”
2nd ICQR Conference, Hong Kong, September 1997.
24. Tsui, K.-L., "Robust Design for Multiple and Dynamic Characteristics,"
NSF Grantees Conference, Monterey, Mexico, January 1998.
25. Tsui, K.-L., Robust Design Modeling for Dynamic Problems,” Intelligent
Quality Control Workshop, Wuerzburg, Germany, September 1998.
29
26. Tsui, K.-L., Jiang, W., & Woodall, W.H., “A New SPC Monitoring: the
ARMA Chart,” INFORMS Conference, Philadelphia, 1999.
27. Tsui, K.-L. & Jiang, W., “New SPC charts: ARMA & PID”, ASA Annual
Conference, Atlanta, 2001.
28. Tsui, K.L. & Au, S.T., “Data Mining & Knowledge Discovery,”
INFORMS Conference, Miami, 2001.
29. Tsui, K.L., & Jiang, W., “An Overview of SPC Charts for Autocorrelated
Data,” Spring Research Conference, Ann Arbor, 2002.
30. Tsui, K.L. & Au, S.T., “Data Mining Applications,” INFORMS
Conference, San Jose, 2002.
31. Tsui, K.L., Woodall, W.H., Koudelik, R., Kim, K.B., Stoumbos, Z.,
Carvounis, C.P., “A Review & Analysis of MTS,” Fall Technical
Conference, October 2003.
32. …
E. Other Scholarly Accomplishments
Software
1. "AT&T Quality Workbench - Robust", Quality Technology Center,
AT&T Bell Labs, 1990.
V. SERVICE
A. Professional Contributions
1. Member, American Statistical Association, 1981-Present.
2. Student Representative, Awards Committee, Department of Statistics,
University of Wisconsin, Madison, 1984-1986.
3. Member, American Society for Quality Control, 1987-Present.
4. Chairman, Research Committee, Quality Assurance Center, AT&T Bell
Labs, 1988-1990.
5. Co-organizer, NSF Conference on Design, Quality and Reliability
Research Conference, Murray Hill, New Jersey, October 6, 1988.
6. Co-organizer, Bell Labs Statistics Day Conference, Holmdel, New Jersey,
30
August, 1988.
7. Georgia Tech Representative, Southern Regional Council on Statistics,
1990-2003.
8. Secretary (Elected), American Statistical Association, Atlanta Chapter,
1991.
9. Member, Panel on Statistical Quality Control, National Research Council,
1991-1992.
10. Program Chair, American Statistical Association Annual Conference,
Section on Physical and Engineering Sciences, Boston, 1992.
11. Vice President (Elected), American Statistical Association, Atlanta
Chapter, 1992.
12. President (Elected), Atlanta Chapter of American Statistical Association,
1993-1994.
13. Co-Chair, Distinguished Outside Speakers Committee, Section of Physical
and Engineering Sciences, American Statistical Association, 1993-1994.
14. Member, Proposal Review Panel of NSF Design, Manufacture &
Industrial Innovation Division, Production Systems, 1994.
15. Member, U.S. Technical Advisory Group to Technical Committee 69 (TC
69) in Applications of Statistical Methods, ISO, 1995-Present.
16. Quality Systems Provisional Auditor, Registration Accreditation Board,
ASQC, 1995.
17. Member, International Advisory Committee, the 2nd International
Conference on Quality and Reliability, 1997.
18. Panel Member, Research Grant Council of Hong Kong, 1998 - 2000.
19. Founding Chair-Elect, Section on Quality, Statistics, & Reliability,
INFORMS, 1999.
20. Chair, Section on Quality, Statistics & Reliability, INFORMS, 2000.
21. Program Chair, Cluster Sessions on QSR, INFORMS Annual Conference,
Philadelphia, Nov. 1999.
22. Program Chair, Cluster Sessions on QSR, INFORMS Annual Conference,
Salt Lake City, May 2000.
23. Member, Proposal Review Panel of NSF Design, Manufacture &
31
Industrial Innovation Division, Production Systems, 2000.
25. Member, CAREER Award Review Panel, of NSF Design, Manufacture &
Industrial Innovation Division, 2000.
26. Program Chair, Cluster Sessions on QSR, INFORMS International
Conference, Hawaii, June, 2001.
27. Program Chair, Invited Cluster Sessions on Data Mining, INFORMS
Annual Conference, San Jose, 2002.
28. Member, Canada Research Chairs Council, National Sciences &
Engineering Research, 2002-present.
29. Program Chair, Invited Cluster Sessions on Data Mining, INFORMS
Annual Conference, Atlanta, 2003.
30. Founding Chair, Section on Data Mining, INFORMS, 2003-04.
31. Member of Advisory Board, Section on Data Mining, INFORMS, 2005-
present.
32. External Examiner, Master Program in Data Science and Business
Statistics, The Chinese University of Hong Kong, 2004-2006.
33. External Examiner, Undergraduate Program in Statistics, The Chinese
University of Hong Kong, 2005-2007.
34. Member, Academic Council of the Beta Research School for Operations
Management and Logistics, Technical University of Eindhoven,
Netherlands, 2005-2008.
35. Member of Best Paper Award Committee, IIE Transactions, 2007.
36. Member of Review Panel, CMII, Engineering Design, 2007.
37. Member of Review Panel, CMII, Small Business Innovative Research,
2008.
38. Keynote Speaker, 4th International Symposium of Bioinformatics,
Atlanta, 2008.
39. Program Co-chair, First International Conference for Interface Between
Statistics and Engineering, Beijing, August, 2009.
40. Keynote Speaker, First International Conference in Prognostics and
Systems Health Management, Macau, January, 2010.
41. Keynote Speaker, Second International Conference in Prognostics and
32
Systems Health Management, Shenzhen, May, 2011.
42. General Co-chair, First International Symposium for Systems Informatics
Engineering, Qingdao, July, 2011.
43. General Chair, Spring Research Conference in Systems Engineering and
Management Science, Shenzhen, May, 2013.
44. General Co-chair, Second International Symposium for Systems
Informatics Engineering, Xian, July, 2013.
45. General Chair, ISI Satellite Meeting in Risk, Business and Industrial
Statistics, Hong Kong, August, 2013.
46. Congress Co-Chair, 8th World Congress of Engineering Asset
Management, Hong Kong, August, 2013.
47. Keynote Speaker, 8th World Congress of Engineering Asset Management,
Hong Kong, August, 2013.
48. Keynote Speaker, ISI Satellite Meeting in Risk, Business and Industrial
Statistics, Hong Kong, August, 2013.
49. General Chair, Spring Research Conference in Systems Engineering and
Management Science, Shenzhen, May, 2014.
50. Program Co-chair, Third International Conference for Interface Between
Statistics and Engineering, Hong Kong, December, 2014.
51. Panel Member, Research Assessment Exercise, Hong Kong University
Grants Committee, 2013-14.
52. Member, Science Program Committee, World Statistics Congress,
International Statistics Institute, 2013-15.
53. General Chair, International Research Conference in Systems Engineering
and Management Science, Wuhan, March, 2015.
54. Program Co-chair, Stu Hunter Conference, Leuven, Belgian, March 9-11,
2015.
55. Member, Statistics Advisory Board, Permanent Secretary for Financial
Services and the Treasury, June 2014-May 2016.
56. Program Co-chair, Stu Hunter Conference, Waterloo, Canada, March 7-9,
2015.
57. General Chair, International Research Conference in Systems Engineering
and Management Science, Beijing, May, 2016.
58. Program Co-chair, Fourth International Conference for Interface Between
33
Statistics and Engineering, Palermo, June, 2016.
59. VP for Communications, International Society for Business and Industrial
Statistics, 2015-17.
60. Chair, IIE Transactions Q&P Focused Area, Best Paper Selection
Committee, 2015-16.
61. Member, Stu Hunter Conference Management Committee, 2015-17.
Editorial and Reviewer Work for Technical Journals
1. Referee for: Journal of the American Statistical Association,
Technometrics, Journal of Quality Technology, Quality and Reliability
Engineering International, Institute of Industrial Engineering Transactions,
Association for Computing Machinery Transactions.
2. Department Editor, Quality and Reliability Engineering, IIE Transactions,
2005-present.
3. Guest Co-Editor, Special Issue in Data Mining, IIE Transactions, 2002.
4. Guest Co-Editor, Special Issue in Healthcare and Public Health
Surveillance, IIE Transactions, 2010.
5. Guest Co-Editor, Special issue on Big Data for Service and Manufacturing
Supply Chain Management, International Journal of Production
Economics, 2015.
6. Associate Editor, Technometrics, 2013-present.
7. Member, Technometrics Management Committee, 2017-19.
B. Campus Contributions
1. Member, Ph.D Comprehensive Examination Committee, School of
Industrial and Systems Engineering: Tina Barr, 1990.
2. Member, Institute M.S. in Statistics Committee, Georgia Institute of
Technology, 1990, 1991.
3. Member, Student Research Evaluation Committee, School of Industrial
and Systems Engineering, 1990.
4. Chairman, Ph.D Comprehensive Examination Committee in Statistics,
School of Industrial and Systems Engineering, 1991.
34
5. Chairman, Probability and Statistics Laboratory, School of Industrial and
Systems Engineering, 1991.
6. Member, Ph.D Dissertation Committee, School of Industrial and Systems
Engineering: Sang H. Lee, 1991.
7. Member, Ph.D Comprehensive Exam Committee, School of Industrial
and Systems Engineering: David Gibson, 1991.
8. Member, Statistics Program Ad Hoc Committee, Georgia Institute of
Technology, 1991.
9. Member, Statistics and Probability Program Planning Committee, Georgia
Institute of Technology, 1992.
10. Member, Advisory Committee, School of Industrial and Systems
Engineering, 1992-1993.
11. Member, Ph.D. Dissertation Committee, School of Industrial and Systems
Engineering: Tina Barr, 1992.
12. Member, Ph.D. Dissertation Committee, School of Industrial and Systems
Engineering: David Gibson, 1994.
13. Member, Ph.D. Dissertation Committee, School of Management: Stacy
Nutt, 1994.
14. Member, Ph.D. Dissertation Committee, School of Management: Karim
Hatoum, 1994.
15. Member, Ph.D. Dissertation Committee, School of Mechanical
Engineering: Wei Chen, 1994.
16. Member, Ph.D. Dissertation Committee, School of Industrial and Systems
Engineering: Daniel Ockerman, 1996.
17. Member, Ph.D. Dissertation Committee, School of Mechanical
Engineering: Pat Koch, 1997.
18. Member, Ph.D. Dissertation Committee, Department of Industrial
Engineering, HKUST, Yimin Cai, 1997.
19. Member, Ph.D. Proposal Committee, School of Mechanical Engineering:
M.C. Marston, 1998.
20. Member, Ph.D. Dissertation Committee, Department of Management
Sciences, HKUST: W. S. Cho, 1999.
21. Member, Master Thesis Committee, Department of Management Science,
35
HKUST: K. F. Leung, 1999.
22. Member, Faculty Development Committee, Department of Industrial
Engineering, HKUST: 1995-99 (as chair in 1999).
23. Member, Promotion and Tenure Committee, Department of Industrial
Engineering, HKUST: 1998-99.
24. Member, Engineering Promotion & Substantiation Committee, School of
Engineering, HKUST: 1997-99.
25. Member, Undergraduate Committee, School of Industrial & Systems
Engineering, 1999-2001.
26. Member, Ph.D. Comprehensive Exam Committee, School of Industrial &
Systems Engineering, 1999.
27. Member, Ph.D., Dissertation Committee, School of Mechanical
Engineering: M.C. Marston, 2000.
28. Chair, Ph.D. Comprehensive Exam Committee, Statistics Area, School of
Industrial & Systems Engineering, 2000.
29. Director, Statistics Center, School of Industrial & Systems Engineering,
2000 - present.
30. Member, IT Committee, School of Industrial & Systems Engineering,
2001 – 2003.
31. Member, Reappointment, Promotional & Tenure Committee, School of
Industrial & Systems Engineering, 2002 – 2005.
32. Chair, Reappointment, Promotional & Tenure Committee, School of
Industrial & Systems Engineering, 2002-2004.
33. Member, Reappointment, Promotional & Tenure Committee, College of
Engineering, 2005 – 2007.
34. Member, Faculty Search Committee, School of Industrial & Systems
Engineering, 2006-2008.
35. External Examiner, M.Sc. program in Data Science and Business
Statistics, The Chinese University of Hong Kong, 2009-10.
36. External Examiner, UG program in Statistics, The Chinese University of
Hong Kong, 2007-09.
37. Member, Department Staffing Committee, Department of Manufacturing
Engineering and Engineering Management, 2009-11.
36
38. Member, Dean Interview Committee, College of Science and Engineering,
City University of Hong Kong, 2010.
39. Member, Dean Interview Committee, College of Language Arts and
Social Sciences, City University of Hong Kong, 2011.
40. Member, Head Search Committee, Department of Civil and Architecture
Engineering, City University of Hong Kong, 2011.
41. Member, Head Interview Committee, Department of Civil and
Architecture Engineering, City University of Hong Kong, 2011.
42. Chair, Department Staffing Committee, Department of Systems
Engineering and Engineering Management, 2012-15.
43. Member, Head Reappointment Committee, Department of Applied
Physics, City University of Hong Kong, 2015.
44. Member, Head Search Committee, Department of Accounting, City
University of Hong Kong, 2014-15.
45. Member, University Chair Professor Promotion Committee, City
University of Hong Kong, 2014-15.
VI. GRANTS AND CONTRACTS (all in US dollars unless specified otherwise)
A. As Principal Investigator, Co-Principal Investigator, or Co-Investigator
1. Development of New Experimental Design Methods for Quality
Improvement (PI: Tsui)
NSF Grant # DDM-9114554
Amount Requested: US$75,000, April 1991
Result: Funded US$75,000 (September 1, 1991 - February 28, 1994)
2. Development of New Statistical Methods for Quality and Productivity
Improvement (PI: Tsui)
NSF Young Investigator Award, Grant #9257918
Result: Basic Fund US$25,000/per year for 5 years (from 1992)
Additional dollar-to-dollar matching fund up to $37,500/yr. for 5 years.
3. A Multi-Step Analysis Procedure for Robust Design (PI: Tsui)
NSF Grant #9312698
Amount Requested: US$82,354, April 1993
Result: Funded US$82,354 (September 1, 1993-February 28, 1996)
4. New Statistical Methods for Quality Improvement (PI: Tsui)
IBM (TQM/CQI Research Grant)
Amount Requested: US$11,594, August 1993
37
Result: Funded US$11,594 (September 1, 1993-August 31, 1994)
5. The Identification of Appropriate Control Chart Methods for Monitoring
Indicator Variables in Safety Performance Analysis (PI: Tsui)
Computational Mechanics Center and Federal Aviation Administration
Amount Requested: US$27,668, September 1993
Result: Funded US$27,668 (January 1994-August 31, 1995)
6. Statistical Problems on Coordinate Measuring Machines
Alcoa Technical Center Foundation (PI: Tsui)
Amount Requested: US$7,500
Result: Funded US$7,500 (unrestricted, 1994)
7. Research on Statistical Quality Control (PI: Tsui)
NSF Matching Fund
Amount Requested: US$19,094
Result: Funded US$19,094 (Sept. 1994-Aug. 1995)
8. Control Charts for Safety Performance Analysis (PI: Tsui)
Federal Aviation Administration
Amount Requested; US$21,075
Result: Funded US$21,075 (1995-1996)
9. Robust Design Methods for Circuit Design Optimization (PI: Tsui)
Research Grant Council
Amount Requested: HK$330,000, 1995-1996
Result: Funded
10. Optimization of Dynamic Systems Through Robust Design (PI: Tsui)
Croucher Foundation Research Grant
Amount Requested: HK$620,000, 1996-1997
Result: Funded
11. Foot Modeling for Improved Fit and Comfort (PI: R.Goonetilleke,
Co-I: Tsui)
Research Grant Council
Amount Requested: HK$465,000, 1996-1997
Result: Funded
12. Estimation for Form Tolerance Verification (PI: Tsui)
Direct Allocation Grant
Amount Requested: HK$78,000, 1996-1997
Result: Funded
13. Statistical Process Control & Automatic Process Control (PI: F. Tsung,
Co-I: Tsui)
Research Grant Council
Amount Requested: HK$470,000
Result: Funded (1997-98)
38
14. Computer and Software for Statistics (with other statistics faculty)
Research Laboratory Funding (Dean’s Office)
Amount Funded: US$8,600 (1998)
15. Statistical Quality Control Methods
Georgia Tech Faculty Development Program (Funding for Professor
Charles Champ’s visit)
Amount Funded: US$28,500 (1998)
16. Analysis of Multivariate Robust Design Problems (PI: Tsui)
Research Grant Council
Amount Requested: HK$450,000
Result: Funded (1998-1999)
17. Foot Modeling for Shoe Last Design (PI: R. Gonmetilleke, Co-I: Tsui)
Research Grant Council
Amount Requested: HK$468,000
Result: Funded (1999-2000)
18. Multivariate Methods for On-line & Off-line Quality Control
National Science Foundation
Amount Requested: US$83,665 for Tsui, US$84,000 for Woodall
Result: Funded (1999-2001)
19. Multivariate Statistical Process Control (PI: F. Tsung, Co-I: Tsui)
Research Grant Council
Amount Requested: HK$468,000
Result: Funded (2000-2001)
20. Robust Design Optimization for Product Platform Design (PI: Tsui, Co-
PIs: Mistree, Allen, Chen)
National Science Foundation
Amount Requested: US$436,000
Result: Funded (2001 – 2004)
21. Quality Control and Activity Monitoring for Telecommunication Industry (PI:
Tsui, Co-PIs: Wu, Jiang)
National Science Foundation
Amount Requested: US$221,000
Result: Funded (2002 – 2005)
22. Foot Modeling & Fitness Design (PI: R. Goonetilleke, Co-I: Tsui)
Research Grant Council
Amount Requested: HK$700,000
Result: Funded (2003 – 2005)
23. Statistical Modeling on Implementing Transit Oriented Development in
Atlanta (PI: Tsui)
39
Georgia Regional Transportation Authority
Amount Requested: US$23,710
Result: Funded (2003 – 2004)
24. Validating Predictive Models for Engineering Design (PIs: Tsui and Chen)
National Science Foundation
Amount Requested: US$205,000 for Tsui; US$215,000 for Chen
Result: Funded (2005 – 2008)
25. SACE: Statistics Aided Computer Experiments (PI: Wu, Co-PIs: Allen,
Joseph, Tsui)
National Science Foundation
Amount Requested: US$300,000
Result: Funded (2006-2009)
26. Data Mining, Modeling, and Monitoring of Customer Activities (PI: Tsui, Co-
PI: Goldsman)
Inter-Continental Hotels Groups
Amount Requested: US$12,000
Result: Funded (2007 - 2008)
27. A Web-Based Maternal Mortality Surveillance System (PI: Goldsman, Co-PIs:
Tsui, Alexopoulos)
Pan American Health Organizations
Amount Requested: US$12,000
Result: Funded (2007 - 2008)
28. Simulator of Pandemic Influenza Intervention Strategies (PI: Tsui, Co-PIs:
Goldsman and Nizam)
World Health Organizations
Amount Request: US$100,000
Result: Funded (2008-2009)
29. An Arena Simulator for Pandemic Influenza Intervention (PI: Tsui, Co-PI:
Goldsman) Center for Disease Control and Prevention
Amount Request: US$23,000
Result: Funded (2008-2009)
30. A Web-Based Maternal Mortality Analysis and Surveillance System (PI:
Goldsman, Co-PI: Tsui)
Pan American Health Organizations
Amount Requested: US$25,000
Result: Funded (2009 - 2010)
31. Collaborative Research: Validation, Calibration, and Prediction
of Computer Models with Functional Output (PIs: Tsui and Hung)
National Science Foundation (Service Enterprise System)
Amount Requested: US$229,000 for Tsui; US$140,000 for Hung, Rutgers
Result: Funded (2009-2011)
40
32. Collaborative Research Fund: Self Cognizant Prognostics for Electronics-Rich
Systems, Co-PCs: Tsui and Pecht , Co-Is: NH Chan, TC Chan (8730029)
Research Grant Council (Hong Kong)
Amount Requested: HK$7.3 M + HK$0. 73 M (matching)
Result: Funded (2010-2013)
33. Strategic Research Grant (SRG): Data Mining and Dynamic Monitoring for
Multi-stage Electronics Manufacturing, PI: Tsui, Co-I: SY Wong (7002553)
City University of Hong Kong
Amount Requested: HK$180,000
Result: Funded (2010-2011)
34. Strategic Research Grant (SRG): Process Monitoring and Improvement in a
Realistic Scenario, PI: AK Shrivastava, Co-I: Tsui (7002601)
City University of Hong Kong
Amount Requested: HK$180,000
Result: Funded (2010-2011)
35. Strategic Research Grant (SRG): Develop a Label-free Microfluidic Platform
for Circulating Tumor Cells Isolation and Enumeration, PI: Z Wang, Co-Is:
Tsui, MM Yang (7002578)
City University of Hong Kong
Amount Requested: HK$180,000
Result: Funded (2010-2011)
36. Strategic Research Grant (SRG): FMRI Connectivity Relation Analysis with
Advanced Structural Equation Modeling, PI: SC Ngan, Co-I: Tsui
City University of Hong Kong (7002566)
Amount Requested: HK$180,000
Result: Funded (2010-2011)
37. General Research Fund (GRF): Modeling and Monitoring of Functional
Computer Experiments, PI: Tsui, Co-I: Hung (9041578)
Research Grant Council (Hong Kong)
Amount Requested: HK$761,994
Result: Funded (2011-2014)
38. General Research Fund (GRF): Ozone-catalytic Oxidation System and Process
Optimization for Indoor Air Purification, PI: O. Hui, Co-I: Tsui (9041564)
Research Grant Council (Hong Kong)
Amount Requested: HK$587,477
Result: Funded (2011-2014)
39. Applied Research Grant (ARG): Performance Assessment of Plasma Assisted
Catalytic Oxidation Based Air Purification Technology for Indoor VOCs
Removal, PI: O. Hui, Co-I: Tsui (9667037)
City University of Hong Kong
Amount Requested: HK$ 1.275 M
41
Result: Funded (2011-2013)
40. Contract Research-RO (ConRes-RO): A Novel Prognosis System That Has
Embedded with Effective and Intelligent Performance Indicators for
Determining the Remnant Life of Slurry Pumps, PI: PW Tse, Co-I: Tsui
(9231036)
Syncrude Canada Ltd
Amount Requested: HK$1.2 M
Result: Funded (2011-2014)
41. Research Centres (ResCtrs): Centre for System Informatics Engineering, PI:
Tsui, Co-Is: KS Chin, O Hui, SC Ngan, AK Shrivastava, PW Tse, SY Wong,
M Xie, MG Pecht (9360144)
City University of Hong Kong
Amount Requested: HK$3 M (VPRT) + HK$1 M (CSE) + HK$1.65 M (VPRT)
Result: Funded (2011-14)
42. General Research Fund (FRF): An Innovative Design for Flexible
Magnetostrictive Sensors with Optimized Parameters for the Integrity
Inspection of Cables/ropes, PI: PW Tse, Co-I: Tsui (9041682)
Research Grant Council (Hong Kong)
Amount Requested: HK$600,000
Result: Funded (2011-14)
43. Infrastructure Account of School/College (APR): Safety, Reliability, and
Disruption Management of High Speed Rail (HSR) Systems, PI: Tsui, Co-Is:
M Xie, SM Lo, H Yan, LJ Zhao (910218)
CityU Research Project (Hong Kong)
Amount Requested: HK$ 1 M
Result: Funded (2011-13)
44. Research Fund for the control of Infectious Diseases (RFCID): Development
of Efficient and Adaptable Simulation Models for Pandemic, PI: Tsui, Co-I:
SY Wong (9211026)
Food and Health Bureau (Hong Kong)
Amount Requested: HK$910,000
Result: Funded (2011-14)
45. Strategic Research Grant (SRG-Fd): Temporal and Spatiotemporal Modeling
for Multiple Stream Data, PI: Tsui, Co-I: PW Tse (7002859)
CityU (Hong Kong)
Amount Requested: HK$100,000
Result: Funded (2012-13)
46. Collaborative Research Fund (CRF): Syndromic Surveillance and Modeling
for Infectious Diseases, PC: Tsui, Co-Is: PW Tse, SY Wong, AB Chan, SM Lo,
RK Yuen (8730031)
Research Grant Council (Hong Kong)
Amount Requested: HK$ 4.7 M + HK$ 0.47 M (matching)
42
Result: Funded (2013-16)
47. Strategic Research Grant (SRG-Fd): Reliability Modeling for Prognostics and
Systems Health management, PI: Tsui, Co-I: Q Zhou
CityU (Hong Kong)
Amount Requested: HK$100,000
Result: Funded (2013-14)
48. Innovation and Technology Fund (ITF): Development and Investigation of a
High-energy Efficient Ozone-catalytic Oxidation Based Air Purifier, PI: OKS
Hui, Co-Is: Tsui, M Xie, X Wu (9440087)
Innovation and Technology Commission (Hong Kong)
Amount Requested: HK$ 1.2 M
Result: Funded (2012-14)
49. Theme-based Research Fund (TRS): Delivering 21st Century Healthcare in
Hong Kong –Building a Quality-and-Efficiency Driven System, PC: F. Chen,
Co-PIs: Tsui, KS Chin, G Huang, KK Lai, E Wong, H Yan, D Yau.
Research Grant Council (Hong Kong)
Amount Requested: HK$ 20.45 M (HK$4 M budget for Tsui)
Result: Funded (2015-19)
50. General Research Fund (GRF): Integrated modeling for remaining useful life
prediction and system health management, PI: Q Zhou, Co-I: Tsui
Research Grant Council (Hong Kong)
Amount Requested: HK$500,000
Result: Funded (2015-17)
51. Strategic Research Grant (SRG-Fd): Statistical Methods for Spatiotemporal
Surveillance, PI: Tsui, Co-Is: SH Kim, D Goldsman
CityU (Hong Kong)
Amount Requested: HK$100,000
Result: Funded (2015-16)
52. General Research Fund: Bayesian Modeling for Prognostics and Systems
Health Management, PI: Tsui, Co-I: A Ling
Natural Science Foundation of China
Amount Requested: RMB 600,000
Result: Funded (2014-17)
53. Innovation and Technology Fund (ITF): Innovative Guided-Wave Sensor and
System for Inspecting the Integrity and Corrosion Extent of Buried and
Covered Pipes, PI: P. Tse, Co-Is: Tsui, Xie
Innovation and Technology Commission (Hong Kong)
Amount Requested: HK$ 2.65 M
Result: Funded (2014-16)
43
54. International Collaborative Research Grant: Human health management and
life/disease risk assessment, PI: WB Wang, Co-PIs: Tsui, B Fu, Y Ying, WH
Woodall
Natural Science Foundation of China
Amount Requested: RMB 2.5 M (RMB 300,000 for Tsui)
Result: Funded (2015-18)
55. Innovative Environment Research Grant: Electric Vehicle Energy Management
Systems Key Laboratory, PI: S Liao, Co-PIs: Tsui, X Li
Shenzhen City Government
Amount Request: RMB 3 M
Result: Funded (2015-17)
56. UGC Education Fund: Collaborative Learning Immersive Project, PC: J Shaw,
Co-PIs: Tsui, Kenderdine, Wagner
University Grants Council
Amount Requested: HK$ 14 M (HK$ 4.4 M budget for Tsui)
Result: Funded (2015-17)
57. ECF Fund: Regulatory and Financial Technologies to Increase Incentives for
Energy Efficiency Investments, PI: Tsui, Co-I: M. Edesess
Environment and Conservation Fund (Hong Kong)
Amount Requested: HK$495,000
Result: Funded (2015-17)
58. Theme-based Research Fund (TRS): Safety, Reliability, and Disruption
Management for HSR and Metro Systems, PC: Tsui, Co-PIs: Xie,
Singpurwalla, Bensoussan, Lo, Yuen, Tse, Shou, Yu, etc.
Research Grant Council (Hong Kong)
Amount Requested: HK$ 40.85 M
Result: Funded (2016-20)
VII. HONORS AND AWARDS
1. "Yale University" Scholarship, Chinese University of Hong Kong, 1976.
2. Guaranteed Financial Assistantship, University of Wisconsin, 1981-1984.
3. Quality Award, Quality Assurance Center, AT&T Bell Labs, 1988.
4. Individual Performance Award, Quality Assurance Center, AT&T Bell Labs, 1988 and 1989.
5. NSF Young Investigator Award, National Science Foundation, 1992.
6. Fellow of American Statistics Association, 2003.
7. Jack Youden Award, Technometrics, 2004.
44
8. Fellow of American Society for Quality, 2013.
9. Elected Member, International Statistical Institute, 2013.
10. Fellow of International Society of Engineering Asset management, 2013.
11. United States Patent #8,568,680 B2, “Gas Treatment by Catalytic Ozone Oxidation”,
with KS Hui and MO Fu, 2013.
12. Best Paper Award, IIE Transactions, 2013.
13. Fellow of the Hong Kong Institution of Engineers (HKIE), 2014.
14. Honorary Advisor of International Institute of Utility Specialists (IIUS), 2015.
15. Elected Council Member, International Statistical Institute, 2017-20.