Hyster H30-40FTS Lift Truck Dimensions1 Manufacturer Name Hyster Company Hyster Company 2 Model...
Transcript of Hyster H30-40FTS Lift Truck Dimensions1 Manufacturer Name Hyster Company Hyster Company 2 Model...
Hyster H30-40FTS Lift Truck Dimensions
Circled dimensions correspond to the line numbers on the tabulated chart inside the Technical Guide. Dimensions are in inches (millimeters).Truck shown with optional equipment - strobe, light package and TouchPoint™ E-hydraulics with adjustable armrest and LP tank.
2
Head ClearanceWhen Seat Is In
Depressed Position(see chart lower left)
15 15
19
10
11
11
37
22 35
16
38
J
G
F
Standard OHG84.6 (2149)
Optional OHG82.0 (2082)
41.1(1043)
22
21
Standard Tread42.0 (1068)
42.0(1068)
2122
For 90˚ Stacking Aisle, Add Outside Turning RadiusPlus Dimension Plus Load Length.
Equal Intersecting Right Angle Aislewith 42.0 (1067) Wide Load and
48.0 (1219) Long Load:H30FT 74.1 (1884)H35FT 74.1 (1884)
H40FTS 74.7 (1897)
Tow Pin12.6 (321)
Standard
Optional
Wide Tread48.7 (1238)
18
L
Seat Type Standard OHG Optional OHGNon-Suspension 42.0 (1067) 39.4 (1001)Semi-Suspension 42.5 (1079) 39.9 (1013)Full-Suspension 42.0 (1067) N/ASwivel Full-Suspension 42.0 (1067) N/A
TRUCK LIFT CAPACITY LOAD CENTER F G J LMODEL lb. (kg) in. (mm) Percent Percent in. (mm) in. (mm)
H30FT 3000 (1360) 24.0 (610) 42% 47.0% 27.2 (691) 14.6 (371)H35FT 3500 (1587) 24.0 (610) 42% 47.0% 27.2 (691) 14.6 (371)H40FTS 4000 (1814) 24.0 (610) 39% 47.0% 27.2 (691) 14.6 (371)
1 Manufacturer Name Hyster Company Hyster Company2 Model H30FT H30FT
Manufacturer Designation Fortis™ Package Fortis™ PackageTransmission Electronic Powershift DuraMatch™Engine Mazda 2.0L Mazda 2.0L
3 Rated Capacity lb. (kg) 3000 (1360) 3000 (1360)4 Load Center, Distance in. (mm) 24.0 (610) 24.0 (610)5 Power Type - Gasoline, LPG, Diesel LP | Gas LP | Gas6 Operator Type Sit-Down Rider Sit-Down Rider7 Step Height in. (mm) 14.6 (371) 14.6 (371)8 Tire Type - Cushion, Solid, Pneumatic Pneumatic Pneumatic9 Wheels, Number - Front / Rear 2x / 2 2x / 2
10 Lift Height, Top of Fork (TOF) in. (mm) 127.0 (3232) 127.0 (3232)11 Lift Heights, Standard Limited Free Lift (LFL) with LBR (TOF) in. (mm) 5.0 (140) 5.0 (140)
Lift Heights, Optional Full Free Lift (FFL) with LBR (TOF) in. (mm) 31.0 (807) 31.0 (807)12 Standard Carriage Width in. (mm) 38.6 (977) 38.6 (977)13 Forks, Thickness x Width x Length in. 1.6 X 3.9 X 42.0 1.6 X 3.9 X 42.0
Forks, Thickness x Width x Length (mm) (40 X 100 X 1067) (40 X 100 X 1067)14 Fork Spread, Outside Dimensions in. (mm) 37.5 (955) 37.5 (955)15 Mast Tilt Angles, Forward / Backward Degrees ˚ 6F / 6B 6F / 6B16 Length To Face of Forks in. (mm) 88.0 (2236) 88.0 (2236)17 Overall Width, Standard Tread in. (mm) 42.0 (1068) 42.0 (1068)
Overall Width, Wide Tread in. (mm) 48.7 (1238) 48.7 (1238)18 Height, Standard Mast - Lowered in. (mm) 84.0 (2125) 84.0 (2125)19 Height, Standard Mast - Extended with LBR in. (mm) 176.0 (4455) 176.0 (4455)
Height, Standard Mast - Extended without LBR in. (mm) 150.0 (3806) 150.0 (3806)20 Height, Standard Overhead Guard in. (mm) 84.6 (2149) 84.6 (2149)
Height, Optional Overhead Guard in. (mm) 82.0 (2082) 82.0 (2082)21 Turning Radius, Minimum Outside (OTR) in. (mm) 77.0 (1955) 77.0 (1955)22 Length, Center of Wheel to Face of Forks in. (mm) 15.1 (384) 15.1 (384)23 Aisle Width, Right Angle Stack (Add Length of Load) in. (mm) 92.0 (2336) 92.0 (2336)24 Equal Aisle, 90-Degree Intersecting Aisle in. (mm) 74.1 (1884) 74.1 (1884)25 Travel Speed, Powershift Transmission RL/NL mph (km / h) 12.7 (20.5) / 13.0 (20.9) N/A
Travel Speed, DuraMatch™ Transmission RL/NL mph (km / h) N/A 12.7 (20.5) / 13.0 (20.9)26 Lift Speed, Standard 2-Stage LFL RL/NL ft. / min (m / s) 112.0 (0.57) / 114.0 (0.58) 112.0 (0.57) / 114.0 (0.58)
Lift Speed, Optional 2-Stage FFL RL/NL ft. / min (m / s) 101.0 (0.51) / 103.0 (0.52) 101.0 (0.51) / 103.0 (0.52)Lift Speed, Optional 3-Stage FFL RL/NL ft. / min (m / s) 105.0 (0.53) / 107.0 (0.54) 105.0 (0.53) / 107.0 (0.54)
27 Lowering Speed, Standard 2-Stage LFL RL/NL ft. / min (m / s) 100.0 (0.51) / 93.0 (0.47) 100.0 (0.51) / 93.0 (0.47)Lowering Speed, Optional 2-Stage FFL RL/NL ft. / min (m / s) 91.0 (0.46) / 73.0 (0.37) 91.0 (0.46) / 73.0 (0.37)Lowering Speed, Optional 3-Stage FFL RL/NL ft. / min (m / s) 95.0 (0.48) / 81.0 (0.41) 95.0 (0.48) / 81.0 (0.41)
28 Drawbar Pull, Standard Transmission @ 1 mph RL/NL lb. (kg) 2547 (11.3) / 1680 (7.47) | 2942 (13.1) / 1680 (7.47) 2547 (11.3) / 1680 (7.47) | 2942 (13.1) / 1680 (7.47)Drawbar Pull, Standard Transmission @ 3 mph RL/NL lb. (kg) 1835 (8.16) / 1680 (7.47) | 2200 (9.8) / 1680 (7.47) 1835 (8.16) / 1680 (7.47) | 2200 (9.8) / 1680 (7.47)
29 Gradeability, Standard Transmission @ 1 mph RL/NL †† Percent % 28 / 29 | 33 / 29 28 / 29 | 33 / 2931 Weight, Stardard Truck (2-Stg. LFL 84 / 127) NL lb. (kg.) 6745 (3059) 6745 (3059)
Weight, Stardard Truck (2-Stg. LFL 84 / 127) RL lb. (kg.) 9745 (4420) 9745 (4420)32 Axle Loading, Static Front / Rear NL lb. (kg.) 3354 (1521) / 3391 (1538) 3354 (1521) / 3391 (1538)
Axle Loading, Static Front / Rear RL lb. (kg.) 8500 (3856) / 1245 (565) 8500 (3856) / 1245 (565)33 Tire Size, Front 6.50 x 10 - 10 6.50 x 10 - 1034 Tire Size, Rear 5.00 x 8.00 5.00 x 8.0035 Wheelbase in. (mm) 54.5 (1385) 54.5 (1385)37 Ground Clearance, Lowest Point NL (with RL subtract -6mm) in. (mm) 5.4 (138) 5.4 (138)38 Ground Clearance, Center of Wheelbase NL in. (mm) 5.7 (144) 5.7 (144)39 Service Brake - Method of Control / Operation Foot / Hydraulic Foot / Hydraulic40 Parking Brake - Method of Control / Operation Hand / Mechanical Hand / Mechanical41 Battery Type Maintenance Free Maintenance Free42 Volts / Cold Cranking Amps v / cca 12 / 475 12 / 47543 Engine, Manufacturer / Model Mazda FE Mazda FE44 Permanent Output hp 40.0 | 46.0 40.0 | 46.045 Torque @ Rated RPM ft.Lbs. (kg / m) 91.0 (12.6) @ 1800 RPM | 104.0 (14.4) @ 1800 RPM 91.0 (12.6) @ 1800 RPM | 104.0 (14.4) @ 1800 RPM46 Number of Cylinders / Displacement No. / cc (ci) 4 / 1998 (122) 4 / 1998 (122)47 Transmission Type, Standard Electronic Powershift DuraMatch™
Standard Speeds, Forward - Reverse 1-1 1-149 Hydraulic Tank Capacity (Drain and Refill) gal. (litre) 7.1 (26.9) 7.1 (26.9)50 Fuel Tank Capacity (Gasoline-Powered Units Only) gal. (litre) 10.1 (38.4) 10.1 (38.4)51 Auxillary Hydraulic Pressure Relief for Attachments PSI (Mpa) 2250 (15.5) 2250 (15.5)
Hyster H30FT Lift Truck Dimensions
CERTIFICATION: These Hyster lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply with Part III ANSI B56.1-revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck.
† NOTE: Performance specifications / ratings are for truck equipped as described under Standard Equipment in this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the nature and condition of the operating area. Specifications are subject to change and the proposed application should be discussed with your authorized Hyster Company Dealer.
†† Limited by traction. For further information on this dimension, please contact your local Hyster Company dealer.
PER
FOR
MAN
CE
†W
EIG
HT
TIR
ES&
WH
LSPO
WER
TRAI
ND
IMEN
SIO
NS
GEN
ERAL
3
1 Manufacturer Name Hyster Company Hyster Company2 Model H30FT H30FT
Manufacturer Designation Fortis™ Package Fortis™ PackageTransmission Electronic Powershift DuraMatch™Engine Yanmar 2.6L Yanmar 2.6L
3 Rated Capacity lb. (kg) 3000 (1360) 3000 (1360)4 Load Center, Distance in. (mm) 24.0 (610) 24.0 (610)5 Power Type - Gasoline, LPG, Diesel Diesel Diesel6 Operator Type Sit-Down Rider Sit-Down Rider7 Step Height in. (mm) 14.6 (371) 14.6 (371)8 Tire Type - Cushion, Solid, Pneumatic Pneumatic Pneumatic9 Wheels, Number - Front / Rear 2x / 2 2x / 2
10 Lift Height, Top of Fork (TOF) in. (mm) 127.0 (3232) 127.0 (3232)11 Lift Heights, Standard Limited Free Lift (LFL) with LBR (TOF) in. (mm) 5.0 (140) 5.0 (140)
Lift Heights, Optional Full Free Lift (FFL) with LBR (TOF) in. (mm) 31.0 (807) 31.0 (807)12 Standard Carriage Width in. (mm) 38.6 (977) 38.6 (977)13 Forks, Thickness x Width x Length in. 1.6 X 3.9 X 42.0 1.6 X 3.9 X 42.0
Forks, Thickness x Width x Length (mm) (40 X 100 X 1067) (40 X 100 X 1067)14 Fork Spread, Outside Dimensions in. (mm) 37.5 (955) 37.5 (955)15 Mast Tilt Angles, Forward / Backward Degrees ˚ 6F / 6B 6F / 6B16 Length To Face of Forks in. (mm) 88.0 (2236) 88.0 (2236)17 Overall Width, Standard Tread in. (mm) 42.0 (1068) 42.0 (1068)
Overall Width, Wide Tread in. (mm) 48.7 (1238) 48.7 (1238)18 Height, Standard Mast - Lowered in. (mm) 84.0 (2125) 84.0 (2125)19 Height, Standard Mast - Extended with LBR in. (mm) 176.0 (4455) 176.0 (4455)
Height, Standard Mast - Extended without LBR in. (mm) 150.0 (3806) 150.0 (3806)20 Height, Standard Overhead Guard in. (mm) 84.6 (2149) 84.6 (2149)
Height, Optional Overhead Guard in. (mm) 82.0 (2082) 82.0 (2082)21 Turning Radius, Minimum Outside (OTR) in. (mm) 77.0 (1955) 77.0 (1955)22 Length, Center of Wheel to Face of Forks in. (mm) 15.1 (384) 15.1 (384)23 Aisle Width, Right Angle Stack (Add Length of Load) in. (mm) 92.0 (2336) 92.0 (2336)24 Equal Aisle, 90-Degree Intersecting Aisle in. (mm) 74.1 (1884) 74.1 (1884)25 Travel Speed, Powershift Transmission RL/NL mph (km / h) 12.7 (20.5) / 13.0 (20.9) N/A
Travel Speed, DuraMatch™ Transmission RL/NL mph (km / h) N/A 12.7 (20.5) / 13.0 (20.9)26 Lift Speed, Standard 2-Stage LFL RL/NL ft. / min (m / s) 112.0 (0.57) / 114.0 (0.58) 112.0 (0.57) / 114.0 (0.58)
Lift Speed, Optional 2-Stage FFL RL/NL ft. / min (m / s) 101.0 ( 0.51) / 103.0 (0.52) 101.0 (0.51) / 103.0 (0.52)Lift Speed, Optional 3-Stage FFL RL/NL ft. / min (m / s) 105.0 (0.53) / 107.0 (0.54) 105.0 (0.53) / 107.0 (0.54)
27 Lowering Speed, Standard 2-Stage LFL RL/NL ft. / min (m / s) 100.0 (0.51) / 93.0 (0.47) 100.0 (0.51) / 93.0 (0.47)Lowering Speed, Optional 2-Stage FFL RL/NL ft. / min (m / s) 91.0 (0.46) / 73.0 (0.37) 91.0 (0.46) / 73.0 (0.37)Lowering Speed, Optional 3-Stage FFL RL/NL ft. / min (m / s) 95.0 (0.48) / 81.0 (0.41) 95.0 (0.48) / 81.0 (0.41)
28 Drawbar Pull, Standard Transmission @ 1 mph RL/NL lb. (kg) 2786 (12.39) / 1680 (7.47) 2786 (12.39) / 1680 (7.47)Drawbar Pull, Standard Transmission @ 3 mph RL/NL lb. (kg) 2012 (8.95) / 1680 (7.47) 2012 (8.95) / 1680 (7.47)
29 Gradeability, Standard Transmission @ 1 mph RL/NL †† Percent % 31 / 29 31 / 2931 Weight, Stardard Truck (2-Stg. LFL 84 / 127) NL lb. (kg.) 6745 (3059) 6745 (3059)
Weight, Stardard Truck (2-Stg. LFL 84 / 127) RL lb. (kg.) 9745 (4420) 9745 (4420)32 Axle Loading, Static Front / Rear NL lb. (kg.) 3354 (1521) / 3391 (1538) 3354 (1521) / 3391 (1538)
Axle Loading, Static Front / Rear RL lb. (kg.) 8500 (3856) / 1245 (565) 8500 (3856) / 1245 (565)33 Tire Size, Front 6.50 x 10 - 10 6.50 x 10 - 1034 Tire Size, Rear 5.00 x 8.00 5.00 x 8.0035 Wheelbase in. (mm) 54.5 (1385) 54.5 (1385)37 Ground Clearance, Lowest Point NL (with RL subtract -6mm) in. (mm) 5.4 (138) 5.4 (138)38 Ground Clearance, Center of Wheelbase NL in. (mm) 5.7 (144) 5.7 (144)39 Service Brake - Method of Control / Operation Foot / Hydraulic Foot / Hydraulic40 Parking Brake - Method of Control / Operation Hand / Mechanical Hand / Mechanical41 Battery Type Maintenance Free Maintenance Free42 Volts / Cold Cranking Amps v / cca 12 / 770 12 / 77043 Engine, Manufacturer / Model Yanmar Yanmar44 Permanent Output hp 40.0 40.045 Torque @ Rated RPM ft.Lbs. (kg / m) 108.0 (14.9) @ 1400 RPM 108.0 (14.9) @ 1400 RPM46 Number of Cylinders / Displacement No. / cc (ci) 4 / 2659 (162) 4 / 2659 (162)47 Transmission Type, Standard Electronic Powershift DuraMatch™
Standard Speeds, Forward - Reverse 1-1 1-149 Hydraulic Tank Capacity (Drain and Refill) gal. (litre) 7.1 (26.9) 7.1 (26.9)50 Fuel Tank Capacity (Gasoline-Powered Units Only) gal. (litre) 10.1 (38.4) 10.1 (38.4)51 Auxillary Hydraulic Pressure Relief for Attachments PSI (Mpa) 2250 (15.5) 2250 (15.5)
Hyster H30FT Lift Truck Dimensions
CERTIFICATION: These Hyster lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply with Part III ANSI B56.1-revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck.
† NOTE: Performance specifications / ratings are for truck equipped as described under Standard Equipment in this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the nature and condition of the operating area. Specifications are subject to change and the proposed application should be discussed with your authorized Hyster Company Dealer.
†† Limited by traction. For further information on this dimension, please contact your local Hyster Company dealer.
PER
FOR
MAN
CE
†W
EIG
HT
TIR
ES&
WH
LSPO
WER
TRAI
ND
IMEN
SIO
NS
GEN
ERAL
4
5
1 Manufacturer Name Hyster Company Hyster Company2 Model H35FT H35FT
Manufacturer Designation Fortis™ Package Fortis™ PackageTransmission Electronic Powershift DuraMatch™Engine Mazda 2.0L Mazda 2.0L
3 Rated Capacity lb. (kg) 3500 (1587) 3500 (1587)4 Load Center, Distance in. (mm) 24.0 (610) 24.0 (610)5 Power Type - Gasoline, LPG, Diesel LP | Gas LP | Gas6 Operator Type Sit-Down Rider Sit-Down Rider7 Step Height in. (mm) 14.6 (371) 14.6 (371)8 Tire Type - Cushion, Solid, Pneumatic Pneumatic Pneumatic9 Wheels, Number - Front / Rear 2x / 2 2x / 2
10 Lift Height, Top of Fork (TOF) in. (mm) 127.0 (3232) 127.0 (3232)11 Lift Heights, Standard Limited Free Lift (LFL) with LBR (TOF) in. (mm) 5.0 (140) 5.0 (140)
Lift Heights, Optional Full Free Lift (FFL) with LBR (TOF) in. (mm) 31.0 (807) 31.0 (807)12 Standard Carriage Width in. (mm) 38.6 (977) 38.6 (977)13 Forks, Thickness x Width x Length in. 1.6 X 3.9 X 42.0 1.6 X 3.9 X 42.0
Forks, Thickness x Width x Length (mm) (40 X 100 X 1067) (40 X 100 X 1067)14 Fork Spread, Outside Dimensions in. (mm) 37.5 (955) 37.5 (955)15 Mast Tilt Angles, Forward / Backward Degrees ˚ 6F / 6B 6F / 6B16 Length To Face of Forks in. (mm) 88.0 (2236) 88.0 (2236)17 Overall Width, Standard Tread in. (mm) 42.0 (1068) 42.0 (1068)
Overall Width, Wide Tread in. (mm) 48.7 (1238) 48.7 (1238)18 Height, Standard Mast - Lowered in. (mm) 84.0 (2125) 84.0 (2125)19 Height, Standard Mast - Extended with LBR in. (mm) 176.0 (4455) 176.0 (4455)
Height, Standard Mast - Extended without LBR in. (mm) 150.0 (3806) 150.0 (3806)20 Height, Standard Overhead Guard in. (mm) 84.6 (2149) 84.6 (2149)
Height, Optional Overhead Guard in. (mm) 82.0 (2082) 82.0 (2082)21 Turning Radius, Minimum Outside (OTR) in. (mm) 77.0 (1955) 77.0 (1955)22 Length, Center of Wheel to Face of Forks in. (mm) 15.1 (384) 15.1 (384)23 Aisle Width, Right Angle Stack (Add Length of Load) in. (mm) 92.0 (2336) 92.0 (2336)24 Equal Aisle, 90-Degree Intersecting Aisle in. (mm) 74.1 (1884) 74.1 (1884)25 Travel Speed, Powershift Transmission RL/NL mph (km / h) 12.7 (20.5) / 13.0 (20.9) N/A
Travel Speed, DuraMatch™ Transmission RL/NL mph (km / h) N/A 12.7 (20.5) / 13.0 (20.9)26 Lift Speed, Standard 2-Stage LFL RL/NL ft. / min (m / s) 112.0 (0.57) / 114.0 (0.58) 112.0 (0.57) / 114.0 (0.58)
Lift Speed, Optional 2-Stage FFL RL/NL ft. / min (m / s) 101.0 (0.51) / 103.0 (0.52) 101.0 (0.51) / 103.0 (0.52)Lift Speed, Optional 3-Stage FFL RL/NL ft. / min (m / s) 105.0 (0.53) / 107.0 (0.54) 105.0 (0.53) / 107.0 (0.54)
27 Lowering Speed, Standard 2-Stage LFL RL/NL ft. / min (m / s) 100.0 (0.51) / 93.0 (0.47) 100.0 (0.51) / 93.0 (0.47)Lowering Speed, Optional 2-Stage FFL RL/NL ft. / min (m / s) 91.0 (0.46) / 73.0 (0.37) 91.0 (0.46) / 73.0 (0.37)Lowering Speed, Optional 3-Stage FFL RL/NL ft. / min (m / s) 95.0 (0.48) / 81.0 (0.41) 95.0 (0.48) / 81.0 (0.41)
28 Drawbar Pull, Standard Transmission @ 1 mph RL/NL lb. (kg) 2515 (11.2) / 1619 (7.2) | 2926 (13.0) / 1619 (7.2) 2515 (11.2) / 1619 (7.2) | 2926 (13.0) / 1619 (7.2)Drawbar Pull, Standard Transmission @ 3 mph RL/NL lb. (kg) 1808 (8.0) / 1619 (7.2) | 2150 (9.56) / 1619 (7.2) 1808 (8.0) / 1619 (7.2) | 2150 (9.56) / 1619 (7.2)
29 Gradeability, Standard Transmission @ 1 mph RL/NL †† Percent % 25 / 26 | 28 / 26 25 / 26 | 28 / 2631 Weight, Stardard Truck (2-Stg. LFL 84 / 127) NL lb. (kg.) 6910 (3134) 6910 (3134)
Weight, Stardard Truck (2-Stg. LFL 84 / 127) RL lb. (kg.) 10360 (4700) 10360 (4700)32 Axle Loading, Static Front / Rear NL lb. (kg.) 3321 (1506) / 3589 (1628) 3321 (1506) / 3589 (1628)
Axle Loading, Static Front / Rear RL lb. (kg.) 9238 (4190) / 1122 (509) 9238 (4190) / 1122 (509)33 Tire Size, Front 6.50 x 10 - 10 6.50 x 10 - 1034 Tire Size, Rear 5.00 x 8.00 5.00 x 8.0035 Wheelbase in. (mm) 54.5 (1385) 54.5 (1385)37 Ground Clearance, Lowest Point NL (with RL subtract -6mm) in. (mm) 5.4 (138) 5.4 (138)38 Ground Clearance, Center of Wheelbase NL in. (mm) 5.7 (144) 5.7 (144)39 Service Brake - Method of Control / Operation Foot / Hydraulic Foot / Hydraulic40 Parking Brake - Method of Control / Operation Hand / Mechanical Hand / Mechanical41 Battery Type Maintenance Free Maintenance Free42 Volts / Cold Cranking Amps v / cca 12 / 475 12 / 47543 Engine, Manufacturer / Model Mazda FE Mazda FE44 Permanent Output hp 40.0 | 46.0 40.0 | 46.045 Torque @ Rated RPM ft.Lbs. (kg / m) 91.0 (12.6) @ 1800 RPM | 104.0 (14.4) @ 1800 RPM 91.0 (12.6) @ 1800 RPM | 104.0 (14.4) @ 1800 RPM46 Number of Cylinders / Displacement No. / cc (ci) 4 / 1998 (122) 4 / 1998 (122)47 Transmission Type, Standard Electronic Powershift DuraMatch™
Standard Speeds, Forward - Reverse 1-1 1-149 Hydraulic Tank Capacity (Drain and Refill) gal. (litre) 7.1 (26.9) 7.1 (26.9)50 Fuel Tank Capacity (Gasoline-Powered Units Only) gal. (litre) 10.1 (38.4) 10.1 (38.4)51 Auxillary Hydraulic Pressure Relief for Attachments PSI (Mpa) 2250 (15.5) 2250 (15.5)
Hyster H35FT Lift Truck Dimensions
CERTIFICATION: These Hyster lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply with Part III ANSI B56.1-revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck.
† NOTE: Performance specifications / ratings are for truck equipped as described under Standard Equipment in this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the nature and condition of the operating area. Specifications are subject to change and the proposed application should be discussed with your authorized Hyster Company Dealer.
†† Limited by traction. For further information on this dimension, please contact your local Hyster Company dealer.
PER
FOR
MAN
CE
†W
EIG
HT
TIR
ES&
WH
LSPO
WER
TRAI
ND
IMEN
SIO
NS
GEN
ERAL
6
1 Manufacturer Name Hyster Company Hyster Company2 Model H35FT H35FT
Manufacturer Designation Fortis™ Package Fortis™ PackageTransmission Electronic Powershift DuraMatch™Engine Yanmar 2.6L Yanmar 2.6L
3 Rated Capacity lb. (kg) 3500 (1587) 3500 (1587)4 Load Center, Distance in. (mm) 24.0 (610) 24.0 (610)5 Power Type - Gasoline, LPG, Diesel Diesel Diesel6 Operator Type Sit-Down Rider Sit-Down Rider7 Step Height in. (mm) 14.6 (371) 14.6 (371)8 Tire Type - Cushion, Solid, Pneumatic Pneumatic Pneumatic9 Wheels, Number - Front / Rear 2x / 2 2x / 2
10 Lift Height, Top of Fork (TOF) in. (mm) 127.0 (3232) 127.0 (3232)11 Lift Heights, Standard Limited Free Lift (LFL) with LBR (TOF) in. (mm) 5.0 (140) 5.0 (140)
Lift Heights, Optional Full Free Lift (FFL) with LBR (TOF) in. (mm) 31.0 (807) 31.0 (807)12 Standard Carriage Width in. (mm) 38.6 (977) 38.6 (977)13 Forks, Thickness x Width x Length in. 1.6 X 3.9 X 42.0 1.6 X 3.9 X 42.0
Forks, Thickness x Width x Length (mm) (40 X 100 X 1067) (40 X 100 X 1067)14 Fork Spread, Outside Dimensions in. (mm) 37.5 (955) 37.5 (955)15 Mast Tilt Angles, Forward / Backward Degrees ˚ 6F / 6B 6F / 6B16 Length To Face of Forks in. (mm) 88.0 (2236) 88.0 (2236)17 Overall Width, Standard Tread in. (mm) 42.0 (1068) 42.0 (1068)
Overall Width, Wide Tread in. (mm) 48.7 (1238) 48.7 (1238)18 Height, Standard Mast - Lowered in. (mm) 84.0 (2125) 84.0 (2125)19 Height, Standard Mast - Extended with LBR in. (mm) 176.0 (4455) 176.0 (4455)
Height, Standard Mast - Extended without LBR in. (mm) 150.0 (3806) 150.0 (3806)20 Height, Standard Overhead Guard in. (mm) 84.6 (2149) 84.6 (2149)
Height, Optional Overhead Guard in. (mm) 82.0 (2082) 82.0 (2082)21 Turning Radius, Minimum Outside (OTR) in. (mm) 77.0 (1955) 77.0 (1955)22 Length, Center of Wheel to Face of Forks in. (mm) 15.1 (384) 15.1 (384)23 Aisle Width, Right Angle Stack (Add Length of Load) in. (mm) 92.0 (2336) 92.0 (2336)24 Equal Aisle, 90-Degree Intersecting Aisle in. (mm) 74.1 (1884) 74.1 (1884)25 Travel Speed, Powershift Transmission RL/NL mph (km / h) 12.7 (20.5) / 13.0 (20.9) N/A
Travel Speed, DuraMatch™ Transmission RL/NL mph (km / h) N/A 12.7 (20.5) / 13.0 (20.9)26 Lift Speed, Standard 2-Stage LFL RL/NL ft. / min (m / s) 112.0 (0.57) / 114.0 (0.58) 112.0 (0.57) / 114.0 (0.58)
Lift Speed, Optional 2-Stage FFL RL/NL ft. / min (m / s) 101.0 (0.51) / 103.0 (0.52) 101.0 (0.51) / 103.0 (0.52)Lift Speed, Optional 3-Stage FFL RL/NL ft. / min (m / s) 105.0 (0.53) / 107.0 (0.54) 105.0 (0.53) / 107.0 (0.54)
27 Lowering Speed, Standard 2-Stage LFL RL/NL ft. / min (m / s) 100.0 (0.51) / 93.0 (0.47) 100.0 (0.51) / 93.0 (0.47)Lowering Speed, Optional 2-Stage FFL RL/NL ft. / min (m / s) 91.0 (0.46) / 73.0 (0.37) 91.0 (0.46) / 73.0 (0.37)Lowering Speed, Optional 3-Stage FFL RL/NL ft. / min (m / s) 95.0 (0.48) / 81.0 (0.41) 95.0 (0.48) / 81.0 (0.41)
28 Drawbar Pull, Standard Transmission @ 1 mph RL/NL lb. (kg) 2757 (12.26) / 1619 (7.2) 2757 (12.26) / 1619 (7.2)Drawbar Pull, Standard Transmission @ 3 mph RL/NL lb. (kg) 1991 (8.86) / 1619 (7.2) 1991 (8.86) / 1619 (7.2)
29 Gradeability, Standard Transmission @ 1 mph RL/NL †† Percent % 28 / 26 28 / 2631 Weight, Stardard Truck (2-Stg. LFL 84 / 127) NL lb. (kg.) 6910 (3134) 6910 (3134)
Weight, Stardard Truck (2-Stg. LFL 84 / 127) RL lb. (kg.) 10360 (4700) 10360 (4700)32 Axle Loading, Static Front / Rear NL lb. (kg.) 3321 (1506) / 3589 (1628) 3321 (1506) / 3589 (1628)
Axle Loading, Static Front / Rear RL lb. (kg.) 9238 (4190) / 1122 (509) 9238 (4190) / 1122 (509)33 Tire Size, Front 6.50 x 10 - 10 6.50 x 10 - 1034 Tire Size, Rear 5.00 x 8.00 5.00 x 8.0035 Wheelbase in. (mm) 54.5 (1385) 54.5 (1385)37 Ground Clearance, Lowest Point NL (with RL subtract -6mm) in. (mm) 5.4 (138) 5.4 (138)38 Ground Clearance, Center of Wheelbase NL in. (mm) 5.7 (144) 5.7 (144 *)39 Service Brake - Method of Control / Operation Foot / Hydraulic Foot / Hydraulic40 Parking Brake - Method of Control / Operation Hand / Mechanical Hand / Mechanical41 Battery Type Maintenance Free Maintenance Free42 Volts / Cold Cranking Amps v / cca 12 / 770 12 / 77043 Engine, Manufacturer / Model Yanmar Yanmar44 Permanent Output hp 40.0 40.0 45 Torque @ Rated RPM ft.Lbs. (kg / m) 108.0 (14.9) @ 1400 RPM 108.0 (14.9) @ 1400 RPM46 Number of Cylinders / Displacement No. / cc (ci) 4 / 2659 (162) 4 / 2659 (162)47 Transmission Type, Standard Electronic Powershift DuraMatch™
Standard Speeds, Forward - Reverse 1-1 1-149 Hydraulic Tank Capacity (Drain and Refill) gal. (litre) 7.1 (26.9) 7.1 (26.9)50 Fuel Tank Capacity (Gasoline-Powered Units Only) gal. (litre) 10.1 (38.4) 10.1 (38.4)51 Auxillary Hydraulic Pressure Relief for Attachments PSI (Mpa) 2250 (15.5) 2250 (15.5)
Hyster H35FT Lift Truck Dimensions
CERTIFICATION: These Hyster lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply with Part III ANSI B56.1-revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck.
† NOTE: Performance specifications / ratings are for truck equipped as described under Standard Equipment in this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the nature and condition of the operating area. Specifications are subject to change and the proposed application should be discussed with your authorized Hyster Company Dealer.
†† Limited by traction. For further information on this dimension, please contact your local Hyster Company dealer.
PER
FOR
MAN
CE
†W
EIG
HT
TIR
ES&
WH
LSPO
WER
TRAI
ND
IMEN
SIO
NS
GEN
ERAL
1 Manufacturer Name Hyster Company Hyster Company2 Model H40FTS H40FTS
Manufacturer Designation Fortis™ Package Fortis™ PackageTransmission Electronic Powershift DuraMatch™Engine Mazda 2.0L Mazda 2.0L
3 Rated Capacity lb. (kg) 4000 (1812) 4000 (1812)4 Load Center, Distance in. (mm) 24.0 (610) 24.0 (610)5 Power Type - Gasoline, LPG, Diesel LP | Gas LP | Gas6 Operator Type Sit-Down Rider Sit-Down Rider7 Step Height in. (mm) 14.6 (371) 14.6 (371)8 Tire Type - Cushion, Solid, Pneumatic Pneumatic Pneumatic9 Wheels, Number - Front / Rear 2x / 2 2x / 2
10 Lift Height, Top of Fork (TOF) in. (mm) 127.0 (3232) 127.0 (3232)11 Lift Heights, Standard Limited Free Lift (LFL) with LBR (TOF) in. (mm) 5.0 (140) 5.0 (140)
Lift Heights, Optional Full Free Lift (FFL) with LBR (TOF) in. (mm) 31.0 (807) 31.0 (807)12 Standard Carriage Width in. (mm) 38.6 (977) 38.6 (977)13 Forks, Thickness x Width x Length in. 1.6 X 3.9 X 42.0 1.6 X 3.9 X 42.0
Forks, Thickness x Width x Length (mm) (40 X 100 X 1067) (40 X 100 X 1067)14 Fork Spread, Outside Dimensions in. (mm) 37.5 (955) 37.5 (955)15 Mast Tilt Angles, Forward / Backward Degrees ˚ 6F / 6B 6F / 6B16 Length To Face of Forks in. (mm) 88.0 (2236) 88.0 (2236)17 Overall Width, Standard Tread in. (mm) 42.0 (1068) 42.0 (1068)
Overall Width, Wide Tread in. (mm) 48.7 (1238) 48.7 (1238)18 Height, Standard Mast - Lowered in. (mm) 84.0 (2125) 84.0 (2125)19 Height, Standard Mast - Extended with LBR in. (mm) 176.0 (4455) 176.0 (4455)
Height, Standard Mast - Extended without LBR in. (mm) 150.0 (3806) 150.0 (3806)20 Height, Standard Overhead Guard in. (mm) 84.6 (2149) 84.6 (2149)
Height, Optional Overhead Guard in. (mm) 82.0 (2082) 82.0 (2082)21 Turning Radius, Minimum Outside (OTR) in. (mm) 77.0 (1955) 77.0 (1955)22 Length, Center of Wheel to Face of Forks in. (mm) 15.1 (384) 15.1 (384)23 Aisle Width, Right Angle Stack (Add Length of Load) in. (mm) 92.0 (2336) 92.0 (2336)24 Equal Aisle, 90-Degree Intersecting Aisle in. (mm) 74.1 (1884) 74.1 (1884)25 Travel Speed, Powershift Transmission RL/NL mph (km / h) 12.7 (20.5) / 13.0 (20.9) N/A
Travel Speed, DuraMatch™ Transmission RL/NL mph (km / h) N/A 12.7 (20.5) / 13.0 (20.9)26 Lift Speed, Standard 2-Stage LFL RL/NL ft. / min (m / s) 112.0 (0.57) / 114.0 (0.58) 112.0 (0.57) / 114.0 (0.58)
Lift Speed, Optional 2-Stage FFL RL/NL ft. / min (m / s) 101.0 (0.51) / 103.0 (0.52) 101.0 (0.51) / 103.0 (0.52)Lift Speed, Optional 3-Stage FFL RL/NL ft. / min (m / s) 105.0 (0.53) / 107.0 (0.54) 105.0 (0.53) / 107.0 (0.54)
27 Lowering Speed, Standard 2-Stage LFL RL/NL ft. / min (m / s) 100.0 (0.51) / 93.0 (0.47) 100.0 (0.51) / 93.0 (0.47)Lowering Speed, Optional 2-Stage FFL RL/NL ft. / min (m / s) 91.0 (0.46) / 73.0 (0.37) 91.0 (0.46) / 73.0 (0.37)Lowering Speed, Optional 3-Stage FFL RL/NL ft. / min (m / s) 95.0 (0.48) / 81.0 (0.41) 95.0 (0.48) / 81.0 (0.41)
28 Drawbar Pull, Standard Transmission @ 1 mph RL/NL lb. (kg) 2484 (11.0) / 1558 (6.93) | 2910 (12.94) / 1558 (6.93) 2484 (11.0) / 1558 (6.93) | 2910 (12.94) / 1558 (6.93)Drawbar Pull, Standard Transmission @ 3 mph RL/NL lb. (kg) 1781 (7.92) / 1558 (6.93) | 2100 (9.34) / 1558 (6.93) 1781 (7.92) / 1558 (6.93) | 2100 (9.34) / 1558 (6.93)
29 Gradeability, Standard Transmission @ 1 mph RL/NL †† Percent % 23 / 24 | 24 / 24 23 / 24 | 24 / 2431 Weight, Stardard Truck (2-Stg. LFL 84 / 127) NL lb. (kg.) 7262 (3294) 7262 (3294)
Weight, Stardard Truck (2-Stg. LFL 84 / 127) RL lb. (kg.) 11111 (5040) 11111 (5040)32 Axle Loading, Static Front / Rear NL lb. (kg.) 3229 (1465) / 4033 (1829) 3229 (1465) / 4033 (1829)
Axle Loading, Static Front / Rear RL lb. (kg.) 9832 (4460) / 1279 (580) 9832 (4460) / 1279 (580)33 Tire Size, Front 6.50 x 10 - 10 6.50 x 10 - 1034 Tire Size, Rear 5.00 x 8.00 5.00 x 8.0035 Wheelbase in. (mm) 54.5 (1385) 54.5 (1385)37 Ground Clearance, Lowest Point NL (with RL subtract -6mm) in. (mm) 5.4 (138) 5.4 (138)38 Ground Clearance, Center of Wheelbase NL in. (mm) 5.7 (144) 5.7 (144)39 Service Brake - Method of Control / Operation Foot / Hydraulic Foot / Hydraulic40 Parking Brake - Method of Control / Operation Hand / Mechanical Hand / Mechanical41 Battery Type Maintenance Free Maintenance Free42 Volts / Cold Cranking Amps v / cca 12 / 475 12 / 47543 Engine, Manufacturer / Model Mazda FE Mazda FE44 Permanent Output hp 40.0 | 46.0 40.0 | 46.045 Torque @ Rated RPM ft.Lbs. (kg / m) 91.0 (12.6) @ 1800 RPM | 104.0 (14.4) @ 1800 RPM 91.0 (12.6) @ 1800 RPM | 104.0 (14.4) @ 1800 RPM46 Number of Cylinders / Displacement No. / cc (ci) 4 / 1998 (122) 4 / 1998 (122)47 Transmission Type, Standard Electronic Powershift DuraMatch™
Standard Speeds, Forward - Reverse 1-1 1-149 Hydraulic Tank Capacity (Drain and Refill) gal. (litre) 7.1 (26.9) 7.1 (26.9)50 Fuel Tank Capacity (Gasoline-Powered Units Only) gal. (litre) 10.1 (38.4) 10.1 (38.4)51 Auxillary Hydraulic Pressure Relief for Attachments PSI (Mpa) 2250 (15.5) 2250 (15.5)
Hyster H40FTS Lift Truck Dimensions
CERTIFICATION: These Hyster lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply with Part III ANSI B56.1-revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck.
† NOTE: Performance specifications / ratings are for truck equipped as described under Standard Equipment in this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the nature and condition of the operating area. Specifications are subject to change and the proposed application should be discussed with your authorized Hyster Company Dealer.
†† Limited by traction. For further information on this dimension, please contact your local Hyster Company dealer.
PER
FOR
MAN
CE
†W
EIG
HT
TIR
ES&
WH
LSPO
WER
TRAI
ND
IMEN
SIO
NS
GEN
ERAL
7
8
1 Manufacturer Name Hyster Company Hyster Company2 Model H40FTS H40FTS
Manufacturer Designation Fortis™ Package Fortis™ PackageTransmission Electronic Powershift DuraMatch™Engine Yanmar 2.6L Yanmar 2.6L
3 Rated Capacity lb. (kg) 4000 (1812) 4000 (1812)4 Load Center, Distance in. (mm) 24.0 (610) 24.0 (610)5 Power Type - Gasoline, LPG, Diesel Diesel Diesel6 Operator Type Sit-Down Rider Sit-Down Rider7 Step Height in. (mm) 14.6 (371) 14.6 (371)8 Tire Type - Cushion, Solid, Pneumatic Pneumatic Pneumatic9 Wheels, Number - Front / Rear 2x / 2 2x / 2
10 Lift Height, Top of Fork (TOF) in. (mm) 127.0 (3232) 127.0 (3232)11 Lift Heights, Standard Limited Free Lift (LFL) with LBR (TOF) in. (mm) 5.0 (140) 5.0 (140)
Lift Heights, Optional Full Free Lift (FFL) with LBR (TOF) in. (mm) 31.0 (807) 31.0 (807)12 Standard Carriage Width in. (mm) 38.6 (977) 38.6 (977)13 Forks, Thickness x Width x Length in. 1.6 X 3.9 X 42.0 1.6 X 3.9 X 42.0
Forks, Thickness x Width x Length (mm) (40 X 100 X 1067) (40 X 100 X 1067)14 Fork Spread, Outside Dimensions in. (mm) 37.5 (955) 37.5 (955)15 Mast Tilt Angles, Forward / Backward Degrees ˚ 6F / 6B 6F / 6B16 Length To Face of Forks in. (mm) 88.0 (2236) 88.0 (2236)17 Overall Width, Standard Tread in. (mm) 42.0 (1068) 42.0 (1068)
Overall Width, Wide Tread in. (mm) 48.7 (1238) 48.7 (1238)18 Height, Standard Mast - Lowered in. (mm) 84.0 (2125) 84.0 (2125)19 Height, Standard Mast - Extended with LBR in. (mm) 176.0 (4455) 176.0 (4455)
Height, Standard Mast - Extended without LBR in. (mm) 150.0 (3806) 150.0 (3806)20 Height, Standard Overhead Guard in. (mm) 84.6 (2149) 84.6 (2149)
Height, Optional Overhead Guard in. (mm) 82.0 (2082) 82.0 (2082)21 Turning Radius, Minimum Outside (OTR) in. (mm) 77.0 (1955) 77.0 (1955)22 Length, Center of Wheel to Face of Forks in. (mm) 15.1 (384) 15.1 (384)23 Aisle Width, Right Angle Stack (Add Length of Load) in. (mm) 92.0 (2336) 92.0 (2336)24 Equal Aisle, 90-Degree Intersecting Aisle in. (mm) 74.1 (1884) 74.1 (1884)25 Travel Speed, Powershift Transmission RL/NL mph (km / h) 12.7 (20.5) / 13.0 (20.9) N/A
Travel Speed, DuraMatch™ Transmission RL/NL mph (km / h) N/A 12.7 (20.5) / 13.0 (20.9)26 Lift Speed, Standard 2-Stage LFL RL/NL ft. / min (m / s) 112.0 (0.57) / 114.0 (0.58) 112.0 (0.57) / 114.0 (0.58)
Lift Speed, Optional 2-Stage FFL RL/NL ft. / min (m / s) 101.0 (0.51) / 103.0 (0.52) 101.0 (0.51) / 103.0 (0.52)Lift Speed, Optional 3-Stage FFL RL/NL ft. / min (m / s) 105.0 (0.53) / 107.0 (0.54) 105.0 (0.53) / 107.0 (0.54)
27 Lowering Speed, Standard 2-Stage LFL RL/NL ft. / min (m / s) 100.0 (0.51) / 93.0 (0.47) 100.0 (0.51) / 93.0 (0.47)Lowering Speed, Optional 2-Stage FFL RL/NL ft. / min (m / s) 91.0 (0.46) / 73.0 (0.37) 91.0 (0.46) / 73.0 (0.37)Lowering Speed, Optional 3-Stage FFL RL/NL ft. / min (m / s) 95.0 (0.48) / 81.0 (0.41) 95.0 (0.48) / 81.0 (0.41)
28 Drawbar Pull, Standard Transmission @ 1 mph RL/NL lb. (kg) 3229 (1465) / 4033 (1829) 3229 (1465) / 4033 (1829)Drawbar Pull, Standard Transmission @ 3 mph RL/NL lb. (kg) 9832 (4460) / 1279 (580) 9832 (4460) / 1279 (580)
29 Gradeability, Standard Transmission @ 1 mph RL/NL †† Percent % 25 / 23 | 25 / 24 25 / 23 | 25 / 2431 Weight, Stardard Truck (2-Stg. LFL 84 / 127) NL lb. (kg.) 7262 (3294) 7262 (3294)
Weight, Stardard Truck (2-Stg. LFL 84 / 127) RL lb. (kg.) 11111 (5040) 11111 (5040)32 Axle Loading, Static Front / Rear NL lb. (kg.) 3229 (1465) / 4033 (1829) 3229 (1465) / 4033 (1829)
Axle Loading, Static Front / Rear RL lb. (kg.) 9832 (4460) / 1279 (580) 9832 (4460) / 1279 (580)33 Tire Size, Front 6.50 x 10 - 10 6.50 x 10 - 1034 Tire Size, Rear 5.00 x 8.00 5.00 x 8.0035 Wheelbase in. (mm) 54.5 (1385) 54.5 (1385)37 Ground Clearance, Lowest Point NL (with RL subtract -6mm) in. (mm) 5.4 (138) 5.4 (138)38 Ground Clearance, Center of Wheelbase NL in. (mm) 5.7 (144) 5.7 (144)39 Service Brake - Method of Control / Operation Foot / Hydraulic Foot / Hydraulic40 Parking Brake - Method of Control / Operation Hand / Mechanical Hand / Mechanical41 Battery Type Maintenance Free Maintenance Free42 Volts / Cold Cranking Amps v / cca 12 / 770 12 / 77043 Engine, Manufacturer / Model Yanmar Yanmar44 Permanent Output hp 40.0 40.0 45 Torque @ Rated RPM ft.Lbs. (kg / m) 104.0 (14.4) @ 1800 RPM 104.0 (14.4) @ 1800 RPM46 Number of Cylinders / Displacement No. / cc (ci) 4 / 2659 (162) 4 / 2659 (162)47 Transmission Type, Standard Electronic Powershift DuraMatch™
Standard Speeds, Forward - Reverse 1-1 1-149 Hydraulic Tank Capacity (Drain and Refill) gal. (litre) 7.1 (26.9) 7.1 (26.9)50 Fuel Tank Capacity (Gasoline-Powered Units Only) gal. (litre) 10.1 (38.4) 10.1 (38.4)51 Auxillary Hydraulic Pressure Relief for Attachments PSI (Mpa) 2250 (15.5) 2250 (15.5)
Hyster H40FTS Lift Truck Dimensions
CERTIFICATION: These Hyster lift trucks meet design specifications of Part II ANSI B56.1-1969, as required by OSHA Section 1910.178(a)(2) and also comply with Part III ANSI B56.1-revision in effect at time of manufacture. Certification of compliance with the applicable ANSI standards appears on the lift truck.
† NOTE: Performance specifications / ratings are for truck equipped as described under Standard Equipment in this Technical Guide. Performance specifications are affected by the condition of the vehicle and how it is equipped, as well as by the nature and condition of the operating area. Specifications are subject to change and the proposed application should be discussed with your authorized Hyster Company Dealer.
†† Limited by traction. For further information on this dimension, please contact your local Hyster Company dealer.
PER
FOR
MAN
CE
†W
EIG
HT
TIR
ES&
WH
LSPO
WER
TRAI
ND
IMEN
SIO
NS
GEN
ERAL
S30-35FT, S40FTS MAST DIMENSIONSMaximum Fork Overall Lowered Overall Extended Height Free-Lift (TOF) Approximate Total Weight of Standard Equipped TruckHeight (TOF) † Height with LBE without LBE with LBE without LBE H30FT/H35FT/H40FTS w/NL H30FT/H35FT/H40FTS w/RL
in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) in. (mm) lbs. (kg) lbs. (kg)2-STAGE LIMITED FREE-LIFT (LFL) VISTA® MAST
123.0 (3132) 82.0 (2075) 172.0 (4355) 146.0 (3706) 5.0 (140) 5.0 (140) 6495 (2952) / 6678 (3035) / 7028 (3195) 9495 (4307) / 10178 (4617) / 11028 (5002)
127.0 (3232) 84.0 (2125) 176.0 (4455) 150.0 (3806) 5.0 (140) 5.0 (140) 6513 (2960) / 6696 (3044) / 7046 (3203) 9513 (4315) / 10196 (4625) / 11046 (5010)
2-STAGE FULL FREE-LIFT (FFL) VISTA® MAST
114.0 (2918) 78.0 (1975) 164.0 (4161) 139.0 (3512) 25.0 (657) 51.0 (1306) 6533 (2970) / 6716 (3053) / 7066 (3212) 9533 (4324) / 10216 (4658) / 11066 (5019)
126.0 (3218) 84.0 (2125) 176.0 (4461) 151.0 (3812) 31.0 (807) 57.0 (1456) 6590 (2995) / 6773 (3079) / 7123 (3238) 9590 (4350) / 10273 (4660) / 11123 (5045)
3-STAGE FULL FREE-LIFT (FFL) VISTA® MAST
175.0 (4450) 80.0 (2025) 224.0 (5673) 198.0 (5024) 27.0 (707) 53.0 (1356) 6802 (3092) / 6985 (3175) / 7335 (3334) 9802 (4446) / 10485 (4756) / 11335 (5141)
187.0 (4750) 84.0 (2125) 236.0 (5973) 210.0 (5324) 31.0 (807) 57.0 (1456) 6846 (3112) / 7029 (3195) / 7379 (3354) 9846 (4466) / 10529 (4776) / 11379 (5161)
198.0 (5050) 90.0 (2275) 247.0 (6273) 222.0 (5624) 37.0 (957) 63.0 (1606) 6903 (3138) / 7086 (3221) / 7436 (3380) 9903 (4491) / 10586 (4802) / 11436 (5187)
216.0 (5510) 96.0 (2425) 265.0 (6723) 240.0 (6074) 43.0 (1107) 69.0 (1756) 7022 (3192) / 7205 (3275) / 7555 (3434) 10022 (4546) / 10705 (4856) / 11555 (5241)
† Lift heights over 157.0” (4000 mm) maximum fork height are considered highlifts and require reduced capacity and restricted back tilt.
Total approximate weights listed include mast, standard carriage, load backrest extension and 70 lbs. LP tank and tank bracket.
RL = Rated Load NL = No Load LBE = Load Backrest Extension
9
Hyster H30-40FTS Mast Specifications
TRUCK CONFIGURATION:• 3-STAGE FFL MAST (169.2 in MFH for H30FT, 163.4 in MFH for H35FT & 151.6 in MFH for H40FT)• 38.5” (978 mm) Standard carriage with load backrest extension (LBE).• Basic truck equipped with the Mazda 2.0L gasoline engine with single-speed electronic powershift transmission.• Standard tires and tread.
Hyster H30-40FTS Lift Truck Rated Capacities
1000
2000
3000
4000
5000
0 10 20 30 40 50 60
RATED LOAD vs. LOAD CENTERSTANDARD CARRIAGE
U. S. CUSTOMARY
RATE
DLO
AD(lb
s)
LOAD CENTER (in)
Standard 24 inch Load Center
RATED LOAD vs. LOAD CENTERSTANDARD CARRIAGE
METRIC
RATE
DLO
AD(k
g)
LOAD CENTER (mm)
Standard 24 inch Load Center
500
1000
1500
2000
2500
0 250 500 750 1000 1250 1500
RATED LOAD vs. LOAD CENTERINTEGRAL CARRIAGE
METRIC
RATE
DLO
AD(k
g)
LOAD CENTER (mm)
Standard 24 inch Load Center
500
1000
1500
2000
2500
0 250 500 750 1000 1250 1500
RATED LOAD vs. LOAD CENTERINTEGRAL CARRIAGE
U.S. CUSTOMARY
RATE
DLO
AD(lb
s)
LOAD CENTER (in)
Standard 24 inch Load Center
1000
2000
3000
4000
5000
0 10 20 30 40 50 60
H30FT
H40FTS
H35FT
H30FT
H40FTS
H35FT
H30FT
H40FTS
H35FT
H30FT
H40FTS
H35FT
10
Hyster H30-40FTS Lift Truck Rated Capacities
STANDARD EQUIPMENTFortis™ Package
Complete truck equipped with:• Mazda 2.0L LP/Gas or the Yanmar 2.6L diesel emissions
compliant engine • Electronic powershift transmission
- Electronic inching- Electronic shift control- Neutral start switch- Anti-restart protection
• MONOTROL® pedal • 2-Stage limited free-lift (LFL) VISTA® mast with maximum fork
height of 127.0" (3232 mm) • 42.0 (1068 mm) wide hook-type carriage with 48.0”
(1219 mm) tall load backrest extension • 42.0" (1067 mm) long forks • 6 degrees forward and 6 degrees backward mast tilt • 3-function valve and hose group• Integrated dashboard display includes:
- LCD Display:-- Fuel level (Gasoline engine only)-- Hour meter-- Coolant temp-- Clock-- Messages
- Service Indicator Lights:-- Alternator-- Transmission oil temperature-- Engine oil pressure-- Brake fluid level-- Fasten seatbelt-- Low fuel level-- Engine malfunction-- System malfunction-- Park brake-- Water temp-- Forward, reverse and neutral direction indicators
• Hydrostatic power steering • Non-suspension vinyl seat• Electronic horn• Adjustable steer column • Rubber floor mat• High air intake• Integral tie downs • Operator restraint system • Serpentine core radiator• Single pedal inch brake• Hyster® Stability Mechanism (HSM)• Cowl-mounted hydraulic control levers• Swing out LPG tank bracket • 84.6” (2149 mm) Overhead guard• 12 months / 2,000 hours manufacturer’s warranty• 12 months / 4,000 hours manufacturer’s powertrain warranty • Operator’s manual• UL Classification LP or D
STANDARD EQUIPMENTFortis™ Advance Package
Complete truck equipped with:• Mazda 2.0L LP/Gas or the Yanmar 2.6L diesel emissions
compliant engine• DuraMatch™ transmission
- Electronic inching- Electronic shift control- Neutral start switch- Anti-restart protection- Auto Deceleration System (ADS)- Controlled power reversal- Controlled roll back on ramps
• MONOTROL® pedal • 2-Stage limited free-lift (LFL) VISTA® mast with maximum fork
height of 127.0" (3232 mm) • 42.0 (1068 mm) wide hook-type carriage with 48.0”
(1219 mm) tall load backrest extension • 42.0" (1067 mm) long forks • 6 degrees forward and 6 degrees backward mast tilt • 3-function valve and hose group• Integrated dashboard display includes:
- LCD Display:-- Fuel level (Gasoline engine only)-- Hour meter-- Coolant temp-- Clock-- Messages
- Service Indicator Lights:-- Alternator-- Transmission oil temperature-- Engine oil pressure-- Brake fluid level-- Fasten seatbelt-- Low fuel level-- Engine malfunction-- System malfunction-- Park brake-- Water temp-- Forward, reverse and neutral direction indicator
• Hydrostatic power steering • Non-suspension vinyl seat • Electronic horn• Adjustable steer column • Rubber floor mat • High air intake• Integral tie downs • Operator restraint system • Serpentine core radiator• Single pedal inch brake• Hyster® Stability Mechanism (HSM)• Cowl-mounted hydraulic control levers• Swing out LPG tank bracket • 84.6” (2149 mm) Overhead guard• 12 months / 2,000 hours manufacturer’s warranty• 12 months / 4,000 hours manufacturer’s powertrain warranty • Operator’s manual• UL Classification LP or D
OPTIONAL EQUIPMENT
• Powertrain protection system (N/A with Fortis Package) • Premium electronic monitoring• High air intake with precleaner• Accumulator• Keyless start (with auxiliary key switch)• TouchPoint™ hydraulics with fully adjustable armrest• TouchControl™ hydraulic control handle with fully
adjustable armrest• Return to set tilt• Square-wave anti-clog radiator• 82.0 (2082 mm) Overhead guard• Semi-suspension seat - vinyl or cloth• Dual inch brake pedals• EZXchange™ LP tank bracket• Password protection• Audible Reverse activated 82-102 dB(A) self-adjusting alarm**• Visible amber strobe light - continuous activated, overhead
guard mounted• Various light packages
- Two brake/back-up high intensity LED lights- Two front and one rear halogen work lights - Two front, one rear halogen work light and two
brake/tail/back-up high intensity LED lights• Parts publications - printed or CD, serial number specific• UL Classification G, GS, LPS• Cab• Michelin XZM radial tires• Pneumatic shaped solids• Various tread widths available• Operator checklist
** A variety of optional alarms are available. For details, contact your local authorized Hyster Dealer or request the Forklift Pedestrian and Accidents brochure - a comprehensive study ofaccidents in the workplace, Part Number: LIFTPED/B 12/03.
Hyster H30-40FTS Standard Features and Options
11
Hyster H30-40FTS Standard Features and OptionsCAPACITY:Model H30FT: 3000 lbs. at 24.0” (1814 kg at 610 mm) load center.Model H35FT: 3500 lbs. at 24.0” (2268 kg at 610 mm) load center.Model H40FTS: 4000 lbs. at 24.0” (2721 kg at 610 mm) load center.
Rated capacities are for trucks equipped with:• 3-Stage full free-lift (FFL) VISTA® mast to 157.0” (4000 mm) maximum fork height• 42.0” (1068 mm) Hook-type carriage with 42.0” (1 067 mm) long forks • 48.0” Tall load backrest extension (LBE)• Standard tread
12
MASTS
Masts are available in 2-stage limited free (LFL) lift and 2- or 3-stage full free-lift (FFL) VISTA® masts.
Masts feature flush-faced, nested-channel design and full-radius, angled load rollers provides increased capacityat height while affording shorter overall length.
CARRIAGE
Carriages are hook-type, ITA Class II mounting. Overall widthwithout load backrest extension (LBE) is 42.0” (1068 mm); withLBE is 43.0” (1094 mm). Minimum inside-to-inside fork spacing,center to center is 5.03” (128 mm). Maximum outside-to-outsidefork spacing, center to center is 38.0” (965 mm).
FORKS
H30-40FTS series features: 1.6” x 3.9” x 36.0” to 60.0”(40 x 100 x 914 to 1 525 mm) long pallet forks.
Polished and tapered forks are also available.
ENGINES
Both the Mazda 2.0L LPG/gasoline or the Yanmar 2.6L dieselengine are emissions compliant powerplants. Their configurationsare specified as follows:Mazda 2.0L emissions compliant engines feature:• 4-cylinder overhead valve and overhead camshaft design• Cast iron block, aluminum cylinder head with hardened
exhaust valve seats• Electronically controlled LPG fuel system• Spin-on full flow oil filter• Single barrel carburetor• Electronic governor• Heavy-duty air cleaner with pre-cleaner • Engine Control Unit (ECU)• Three-way catalytic converter exhaust system• 2.0L engine produces 40.0 horsepower
Yanmar 2.6L emissions compliant engine features:• Naturally aspirated air intake• Cast iron engine block and heads with hardened valve seats• Electric Fuel shut-off• Glow-plugs for fast starts in cold climates• Spin-on full-flow oil filter• Mechanical governor • Counterweight vertical exhaust (optional)• 2.6L engine produces 40.0 horsepower
TRANSMISSION
• Standard Electronic Powershift: Single range powershift,electronic inching (requires no adjustment), electric shift control, neutral start switch, and anti-restart protection.
• DuraMatch™ : All of the features of the standard electronic transmission plus Auto Deceleration System,controlled power reversal, controlled roll back on ramps.
COOLING SYSTEM
• Multiple cooling system designs:- Serpentine core- Square-wave anti-clog
• All radiators utilize cross-flow aluminum cores, pushertype fans and permanently lubricated water pump.
• “Knife-edge” type fan shrouds that direct air flow through the counterweight air passages.
• 15 psi operating system pressure
ELECTRICAL SYSTEM
• CANbus electrical system simplifies truck wiring and enhances truck dependability.
• IPP 66 sealed automotive style electrical connectors.• Standardized wire routing, all wires are color coded, and
marked with numbers for easy identification.• Vehicle System Manager (VSM) directly or indirectly
controls all electrical functions except those controlledby the Engine Control Unit (ECU).
• 12-volt maintenance free battery provides 475 cold cranking amps
• Onboard diagnostics monitoring and feedback.
HYDRAULIC SYSTEM
Manual Hydraulic Control Valve & Electro-Hydraulic Control Valve• Tilt and auxiliary systems have 2,250 psi (15.5 Mpa) relief
pressure in all valve variations.• Hydraulic system is protected by a replaceable 10-micron
paper element in-tank filter assembly.• Hydraulic breather filter includes an anti-splash baffle and is
rated at ten micron absolute.• O-Ring face seal fittings with captive O-Ring grooves are used
on all high pressure connections.• Emergency lowering valve allows load to be lowered in the
event of battery power loss.• 100 Mesh suction line strainer.
STEER AXLE / STEER SYSTEM
• Equal-area, double-ended, hydrostatic steering cylinder is mounted in cast ductile iron axle frame.
• Elastomeric axle mounts absorb shock and allowlubrication free articulation.
• Axle assembly utilizes synthetic boots and seals to retain lubricants and shield components against destructive grit and reduce lube points.
• Wheel hubs rotate on large, tapered roller bearings.• Top spindle bearings lubricated through easy access
lube fittings.• Hydrostatic steer system provides smooth, precise
steering with only 4 turns lock-to-lock.• Hyster® Stability Mechanism (HSM) enhances lateral stability
by limiting steer axle articulation without a compromise inuneven surface travel.
BRAKES
• Asbestos free, self-energizing, automatically adjustingdrum brake assemblies.
• Single circuit master cylinder with sealed fluid reservoir and magnetic fluid level sensor.
• Ratchet-type, hand-activated parking brake lever allowscontrolled application.
OPERATOR COMPARTMENT
• Cowl mounted hydraulic hand levers.• TouchPoint™ electro-hydraulic seat side mini-levers
with full adjustable armrest (optional).• TouchControl™ hydraulic seat side joystick with full
adjustable armrest (optional).• 12-Inch textured steering wheel with spinner knob.• Automotive style foot controls with single braking/inching
pedal (dual pedals are optional).• Integrated dashboard display is backlit, allowing easy
visibility under all lighting conditions.• Grid-style overhead guard offers superb visibility at
extended heights.• Infinitely adjustable tilt steer column.• MONOTROL® pedal controls engine speed and truck
direction, freeing operator’s hands to operate steeringand hydraulic levers.
Special attachments, equipment or accessories not listed above may be available through ApplicationsEngineering for specific application requirements.
Hyster CompanyP.O. Box 7006Greenville, North Carolina27835-7006
Part No.: H3-4FTS/TG6/2005 Litho in U.S.A.
Visit us online at www.hysterusa.com or call us at 1-800-HYSTER-1.
Hyster, , SpaceSaver, VISTA and MONOTROL are registered trademarks of Hyster Company. Fortis,DuraMatch, Pacesetter VSM, TouchPoint, TouchControl, Challenger, and are trademarks of Hyster Company. Hyster products are subject to change without notice.
The Hyster Company products included in this document may be coveredby US Patent 6,684,148, and other patents pending.