HydroXtreme Flyer
-
Upload
luciano-fucello -
Category
Documents
-
view
216 -
download
0
description
Transcript of HydroXtreme Flyer
BATTLEFIELD TESTEDOver 1,000 miles supplied to the US Military for fuel and
AAHOSEOG.COM • (814)-438-7616
OILFIELD PERFECTED•
Oil & Gas industry• Proven performance for large-volume transfer of fresh
• 200 psi working pressure• 660’ lengths available in 6, 8, 10, and 12 inch diameter• 5X the abrasion and UV resistance of rubber
nitrile substitutes•
•
RISK ANALYSIS• • • • • •
HYDROXTREME™Polyurethane Lay-Flat Hose is lightweight and weather, abrasion
2424 West 23rd Street. Erie, PA 16506Phone 814-438-7616. Fax 814-438-8163
http://www.aahoseog.com/
that demands the highest performance in environmental protection, workplace safety,
Engineered Tough:• • 150,000+ cycle tabor abrasion without exposure of fabric reinforcement• 50% higher puncture resistance than that of woven and rubber nitrile hose•
Added UV Resistance:• Proprietary UV inhibitor compound increases UV resistant properties
by more than 30%•
gloss the most resistant option•
in demanding environments
Innovative Features:• One-piece construction of cover,
reinforcement, and liner with no adhesives•
urethane guaranteed against liner delamination
• 100% high tenacity polyester yarn reinforcement
• Tube and outer cover materials are
Environmentally Safe:•
coupling connections per mile)• • Highly resistant to hydrolysis, ozone, and a wide range of fuels/chemicals• Chemical resistant to hydrocarbons and low concentrations of alkalis/acids• Rapid deployment and retrieval• Hose follows demanding terrain without bracing• Fully insured with catastrophic environmental policy
Standard Lengths Available: 660’, 330’, 200’, 100’, & 50’
PART NUMBER
INSIDE DIAMETER
WEIGHTLBS/FT
OVERALL WALL
THICKNESS
COVER THICKNESS
WORKING PRESSURE
BURST PRESSURE
SAFETY FACTOR
MAX HOSE LAY48 BPM: 2000GPM
INLET PUMP
XLF40 4” Consult Factory
XLF60 6”
XLF80 8”
XLF100 10”
XLF120 12”
Color: BlackCustom colors for large volume orders
Polyester Fabric Reinforcement
Polyurethane Thru-the-weave