HYDRAULIC SUBMERSIBLE PUMPS - GM TURBO...HYDRAULIC SUBMERSIBLE PUMPS ‘HS’ Pumps For Deep...
Transcript of HYDRAULIC SUBMERSIBLE PUMPS - GM TURBO...HYDRAULIC SUBMERSIBLE PUMPS ‘HS’ Pumps For Deep...
HYDRAULIC SUBMERSIBLE PUMPS
‘HS’ Pumps For Deep ExcavationsEnvironmentally Friendly - Up To 100m Hose - Simple Maintenance
24 Hour Running - Electric Start / Auto ShutdownSuper Silent At 60db(A)
‘HS’ PUMPS
40
36
32
28
24
20
16
12
8
4
0
24 48 72 96 120
HS75D - Drainer16/5/08
m3/h
m
120
105
90
75
60
45
30
15
ft
HSP20
HSP10
50
45
40
35
30
25
20
15
10
5
0
3 6 9 12 15 18
HS25 - Borehole10/4/08
m3/h
m
160
140
120
100
80
60
40
20
ft
HSP20
HSP10
80
72
64
56
48
40
32
24
16
8
0
12 24 36 48 60
HS50 Range12/7/04
D
m3/h
m
10hp powerpack
J
H
240
210
180
150
120
90
60
30
ft
B
HS75HS50HS25
Detailed pump curves are available at www.selwoodpumps.com
Super SilentSuper Silent versions are available with noise levels from as low as 60 db(A).
Fully BundedAll Super Silent units are fully bunded, ensuring that any fuel or oil spillage is retained within the bund and does not contaminate the surroundings. Drain plugs within the unit’s chassis can then be used to remove the fluids.
Auto Stop/Start & TelemetryFloat control for automatic stopping and starting of the pump using the latest technology to give an easy to use, effective and efficient control.
Telemetry allows remote measurement and reporting of the pumps operation directly to pre-selected mobiles or land lines, providing real time alarm messages for high level float, failure/start, engine fault and emergency stop activation.
HydraulicsThe hydraulic system can run on synthetic biodegradable or vegetable oil.
ENVIRONMENTAL
60db(A)
HSP110
The high performance hydraulic submersible Selwood Hydrosub pumps comprise 50mm to 200mm models with electric start diesel driven hydraulic power packs, fully protected by an automatic shutdown system.
A unique feature of this range of pumps is their versatility. The hydraulic wet ends, available in aluminium, cast iron or stainless steel, are capable of a high flow and low head or a low flow and high head. The power packs can each run a number of different submersible pumps dependant upon the material to be pumped. These encompass drainer, vortex, screw, chopper, high head, jetting and borehole pumps. Also available is the Selwood
Seldredge, a modular system with a 150mm screw pump used to mix heavy
sludges and pump them away.
The hydraulic system can run on synthetic biodegradable or vegetable
oil which significantly reduces harmful environmental pollution. The hydraulics
incorporate a large return filter ensuring that any contaminants are captured and the fuel tank has flushing panels and a drain facility as well as
providing 24hr running capability. Safety features include full engine protection and hydraulic shut off through oil loss.
High specification motors and replaceable stainless steel wear plates are featured throughout the range. Super Silent versions are available with noise levels from as low as 60db(A) at 22ft (7m). The Borehole pump is designed for use in methane environments
such as landfill sites. This pump achieves its high head despite its small diameter utilising two or three stage impellers.
The pump is designed to be as smooth as possible with a bullet profile for easy borehole insertion.
HSP10
HSP20
HSP35
H - High Head, C - Chopper, J - Jetting, S - Vortex, D - Drainer, B - Borehole, SC - Screw, L - Low Head
Canal and river maintenance (UK)
‘HS’ PUMPS
Settlement Tank Clearing - Chopper Pump (UK)Seldredge (UK)
80
70
60
50
40
30
20
10
0
HS100 Range19/3/07
m3/h
m
260
220
180
140
100
60
20
ft
30 60 90 120 150 180
H
S
C
D
SC
30
25
20
15
10
5
0100 200 300 400 500
HS150 Range12/7/04 - 28/1/09
m3/h
m
90
80
70
60
50
40
30
20
10
ft
S
C
D
L
SC
HS200/250D20/5/08
40
36
32
28
24
20
16
12
8
4
0
120 240 360 480 600
m3/h
m
120
105
90
75
60
45
30
15
ft
HS200HS100 HS150
30
25
20
15
10
5
0
60 120 180 240 300 360
HS150 SELDREDGE3/07
m3/h
m
90
80
70
60
50
40
30
20
10
ft
Seldredge
Detailed pump curves are available at www.selwoodpumps.com
HS25 Borehole
Seldredge
H - High Head, C - Chopper, J - Jetting, S - Vortex, D - Drainer, B - Borehole, SC - Screw, L - Low Head
Specification HSP10 HSP20 HSP35 HSP110
Engine Speed rpm 1900 1900 1900 2000
Hydraulic Flow l/min 20 - 24 28 - 31 50 - 602 x 60 1 x 20
Hydraulic Pressure
bar 138 206 206 206
Running Hours hr 36 13 - 24 12 - 24 20
Length, Width, Height (cm) + Dry Weight
180 x 97 x 132
(460kg)
183 x 108 x 163
(760kg)
183 x 108 x 163
(840kg)-
200 x 120 x 1650 (550kg)
355 x 146 x 185
(1100kg)
355 x 146 x 185
(1200 kg)-
-215 x 122
x 173 (1325kg)
215 x 122 x 173
(1350kg)
243 x 139 x 206
(2200kg)
-411 x 177
x 207 (1665kg)
411 x 177 x 207
(1690kg)
Super Silent db(A) @ 7m - 60 60 60
Specifications and illustrations are subject to revision without notice.
Powerpack Wet Ends Description
HSP10
HS25BHS50B HS50D HS50H HS75D
2 Stage Bore Hole50mm - Borehole50mm - Drainer
50mm - High Head75mm - Drainer
HSP20&
HSP35
HS25H HS50JHS75D
HS100D HS100S HS100C
HS100SCHS150L
3 Stage Bore Hole50mm - Jet
75mm - Drainer100mm - Drainer100mm - Vortex
100mm - Chopper100mm - Screw
150mm - Low Head
HSP35&
HSP110
HS100SCHS100H HS150D HS150S HS150C
HS150SCHS200D
100mm - Screw100mm - High Head
150mm - Drainer150mm - Vortex
150mm - Chopper150mm - Screw
200mm - Drainer
HSP110 HS200D Seldredge
200mm - Drainer 150mm - Dredger
Pumps
Des
igne
d by
Sel
woo
d. P
rinte
d on
170
gsm
Reg
ency
Glo
ss u
sing
a X
erox
Doc
uCol
or 2
42.
P092 English 2/13
‘HS’ PUMPSEnvironmentally Friendly
Up To 100m Hose
Simple Maintenance
24 Hour Running
Electric Start / Auto Shutdown
Super Silent At 60db(A)
Selwood Limited, Bournemouth Road, Chandler’s Ford, Eastleigh, Hampshire, SO53 3ZL. UKTel: +44 (0)23 8026 6311 Fax: +44 (0)23 8026 0906 Web: www.selwoodpumps.com E-mail: [email protected]