Hydraulic Ram Pumps - Talleres AES, Bolivia
description
Transcript of Hydraulic Ram Pumps - Talleres AES, Bolivia
Talleres AES Los Cafetales 2753 Alto Queru Queru
Teléfono / fax 00591-4-4453973 - Casilla Postal 4082 Cochabamba - Bolivia
e-mail: [email protected]
HHyyddrraauulliicc RRaamm PPuummppss
PERFORMANCE
The performance of a ram pump is determined by the working head �h� and the
manometric delivery height �H� to which water must be raised. Available flow rate is
usually equal to feeding flow rate �Q� of the pump. Pumped flow rate �q� can be
determined as follows:
çH
hQq
where Q is the feeding flow rate in litres / minute h is given in meters
H is given in Meters h is the pump efficiency in %/100.
Example: let Q = 100 Litres / minute, h = 1.1 m, H = 9.0 m an h = 0.6. Therefore:
id2092088 pdfMachine by Broadgun Software - a great PDF writer! - a great PDF creator! - http://www.pdfmachine.com http://www.broadgun.com
Then: Q = 100 x 1.1 / 9.0 x 0.6 = 7.33 litres / minute. = 10.56 m3/day
Working head �h� for our ram pumps can be as low as 0.5 m, but not higher than 15 m.
Flow rate capacity and maximal delivery height can be read from Table 1
Efficiency of our pumps may be adjusted to optimize performance and reach values from 50% to more than 80%.
Flow consumption Ram pump size in inches
1 2 3 4 6
From 4 7 18 34 65 Flow rate of driving water
Litres per minute
To 50 160 250 450 1300
Maximal delivery height in meters. 140 120 100 40 20
Drive pipe diameter in inches 1 2 3 4 6
PRICES in American currency US$ / unit
Effective for deliveries starting July 1st
. 2006
SIZES, DIMMENSIONS Y PACKING WEIGHTS
Size Dimensions (mm) Net weight (kg.) Net weight (kg) STANDARD High pressure
DN 25 550 x 200 x 600 10 12 DN 50 600 x 220 x 700 21 27 DN 80 750 x 240 x 800 41 52 DN 100 800 x 270 x 900 62 76 DN 150 900 x 300 x 1000 95 120
- Our prices include engineering design for installation. Detailed drawings are prepared and sent by e-mail in Acad 2000.
- Prices are understood net, ex works and do not include packing, local taxes neither transport costs.
STANDARD Series HIGH PRESSURE SERIES Size
Complete unit Less GS fittings and less base
frame
Complete unit Less GS fittings and less base
frame
1� (DN25) 249 210 320 280
2� (DN50) 395 345 465 415
3� (DN80) 695 620 869 790
4� (DN100) 1250 1100 - -
6� (DN150) 1990 1630 - -
- Bank costs are to customer�s charge.
- Payment: 100% in advance by bank transfer to our account. See instructions at the end of this document.
- Ex-works delivery term: two to ten weeks for smaller orders; negotiable for higher volumes.
TECHNICAL WARRANTY
We guarantee our products against any design, material or workmanship failure for a period of 5 years after delivery.
TO SELECT A PUMP AND TO PLACE AN ORDER
Each ram pump is �tailored� in our workshop in accordance with specific
parameters of individual projects. Customer should indicate:
- the working head,
- the delivery head,
- the distance from pump to delivery site
- and total daily volume of water to be pumped.
T/T payment instructions: Banco de Crédito de Bolivia, to the favor of: Miguel Alandia,
account number: 301-07130401-2-09 - Cochabamba - Bolivia