Hydraulic Puller-Tensioner AFS804 - Tesmec...Hydraulic Puller-Tensioner AFS804 The machine is...
1
5785 7165 2500 3140 1378 Tesmec S.p.A. Headquarters Via Zanica, 17/O - 24050 Grassobbio (BG) - Italy Tel: +39.035.4232911 - Fax: +39.035.4522445 Manufacturing facilities Via Pertegalli, 2 - 24060 Endine Gaiano (BG) - Italy Tel: +39.035.825024 - Fax: +39.035.826375 Manufacturing facilities Via Don Brambilla, 26/28 - 23844 Sirone (LC) - Italy Tel: +39.031.858311 - Fax: +39.031.853562 Ed. 2015/2016 Keep you updated on: www.tesmec.com PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE ISO 9001:2008 Certified Quality System Hydraulic Puller-Tensioner AFS804 The machine is suitable to string one conductor. The bull-wheel grooves are made of wear- proof nylon sectors. The machine is completely electronically controlled. Note: The machine is also available with special nylon sectors kit for two bundle conductors up to 38 mm of diameter. (ALL080). Puller Performance Max pull 200 kN Speed at max pull 1.3 km/h Max speed 5 km/h Pull at max speed 50 kN Hydraulic Transmission 1 hydraulic half-closed circuit that allows very sensitive tensioning control and negligible deviations of tension in case of speed change. The machine is provided with tension pre- setting system. Characteristics Bull-wheel diameter 2400 mm Max conductor diameter 60 mm Max rope diameter 31 mm Mass 16000 kg Engine Diesel 129 kW (173 hp) Cooling system water Electrical system 12 V Tensioner Performance Max tension 200 kN Max speed 5 km/h Note: the basic machine performance is calculated at 20°C and at sea level Available Devices ALL005 Hydraulic power for an external compressor ALL037 Pre-heater arctic kit for use up to -30°C ALL051 Cable remote control kit (instrument not included) ALL059 Radio remote control kit (instrument not included) ALL071 Hydraulic rope/conductor clamp for reel/drum change operations ALL080 Special nylon sectors kit for two bundle conductors up to 38 mm of diameter AXC005 Cable remote control device AXH007 Radio remote control desk Configuration 2 negative self-acting hydraulic brakes Hydraulic dynamometer with set-point and automatic control of maximum pull Hydraulic oil cooling system Digital meter counter Control instruments for hydraulic system and Diesel engine Rigid axle for towing at max speed of 30 km/h with mechanical parking brake Hydraulic power pack to control 2 drum stands with hydraulic motor or 2 reel winders Anchoring point on the side of the machine 2 rear hydraulic stabilizers for levelling and set-up operations 2 front jacks for a better stability under work conditions
Transcript of Hydraulic Puller-Tensioner AFS804 - Tesmec...Hydraulic Puller-Tensioner AFS804 The machine is...
A1 - 841x594
DEN
OM
INAT
ION
N° P
LAN
DRF.
DATE
SCAL
E
This drawing is propety of TESMEC s.p.a.The italian law forbids the reproductionand divulgation to third party.
Le �gure, le denominazioni, i riferimenti ed i dati contenuti nel presente disegno non sono impegnativiFigures, denominations, references a data reppresented in this drawing are not binding.
. PULLER TENSIONER - AFS 804 .
. ASSEMBLY DRAWING .DRAWING FOR COMMERCIAL OFFER
C03-00069F.P.V. 1:1528/05/2014
5785
7165
2500
3140
1378Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2015/2016
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008Certified Quality System
Hydraulic Puller-TensionerAFS804
The machine is suitable to string one conductor.The bull-wheel grooves are made of wear-proof nylon sectors.The machine is completely electronically controlled.
Note: The machine is also available with special nylon sectors kit for two bundle conductors up to 38 mm of diameter.(ALL080).
Puller PerformanceMax pull 200 kNSpeed at max pull 1.3 km/hMax speed 5 km/hPull at max speed 50 kN
Hydraulic Transmission1 hydraulic half-closed circuit that allows very sensitive tensioning control and negligible deviations of tension in case of speed change.The machine is provided with tension pre-setting system.
CharacteristicsBull-wheel diameter 2400 mmMax conductor diameter 60 mmMax rope diameter 31 mmMass 16000 kg
EngineDiesel 129 kW (173 hp)Cooling system waterElectrical system 12 V
Tensioner PerformanceMax tension 200 kNMax speed 5 km/hNote: the basic machine performance is calculated at 20°C and at sea level
Available Devices
ALL005 Hydraulic power for an external compressor
ALL037 Pre-heater arctic kit for use up to -30°C
ALL051 Cable remote control kit(instrument not included)
ALL059 Radio remote control kit (instrument not included)
ALL071 Hydraulic rope/conductor clamp for reel/drum change operations
ALL080 Special nylon sectors kit for two bundle conductors up to 38 mm of diameter
AXC005 Cable remote control deviceAXH007 Radio remote control desk
Configuration 2 negative self-acting hydraulic brakesHydraulic dynamometer with set-point and automatic control of maximum pullHydraulic oil cooling systemDigital meter counterControl instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brakeHydraulic power pack to control 2 drum stands with hydraulic motor or 2 reel windersAnchoring point on the side of the machine2 rear hydraulic stabilizers for levelling and set-up operations2 front jacks for a better stability under work conditions
