Hydraulic operated, dry running multi disc clutch with ...
Transcript of Hydraulic operated, dry running multi disc clutch with ...
W.Jäger, April 2010
„ In between c lutc h“
Hydraulic operated, dry running multi disc clutch
with radial oil input for assembling
between di�erent drive sections
AMSBECK-Maschinentechnik GmbH Boschweg 15 D-48351 Everswinkel Tel. +49 2582/66812-0 Mail: [email protected]
Arrangement of „in between“-clutch
W.Jäger, April 2010 AMSBECK-Maschinentechnik GmbH Boschweg 15 D-48351 Everswinkel Tel. +49 2582/66812-0 Mail: [email protected]
Diesel
Coupling
Pump Gear
Pumps
Diesel
„In between“-clutch
HZK 120 – technical specifications
W.Jäger, April 2010
• Hydraullic operated multi disc clutch
• 1200 Nm stat.,1100 Nm dyn.
• 12 – 14 bar operating pressure
• mounted between gear and pump
• compact housing
• radial pressure input
• leakage free system
• dry running disc
• low idle torque
• axial force transmission across taper roller bearings with lubrication
• pilot bearing
• no external acting force
• high quality PTFE-seals
• aluminium housing
• SAE-flange or special one out of aluminium
• in- and output of shaft according to DIN 5480, DIN 6885, ANSI B92-1, etc.
• completely mounted and tested
AMSBECK-Maschinentechnik GmbH Boschweg 15 D-48351 Everswinkel Tel. +49 2582/66812-0 Mail: [email protected]
HZK 120, gearside
W.Jäger, April 2010 AMSBECK-Maschinentechnik GmbH Boschweg 15 D-48351 Everswinkel Tel. +49 2582/66812-0 Mail: [email protected]
HZK 120, pumpside
W.Jäger,April 2010 AMSBECK-Maschinentechnik GmbH Boschweg 15 D-48351 Everswinkel Tel. +49 2582/66812-0 Mail: [email protected]
HZK 120, gearside, quarter sectionel drawing
W.Jäger, April 2010 AMSBECK-Maschinentechnik GmbH Boschweg 15 D-48351 Everswinkel Tel. +49 2582/66812-0 Mail: [email protected]
HZK 120, pumpside, quarter sectionel drawing
W.Jäger, April 2010 AMSBECK-Maschinentechnik GmbH Boschweg 15 D-48351 Everswinkel Tel. +49 2582/66812-0 Mail: [email protected]
HZK 120, main dimension
W.Jäger, April 2010
276
AMSBECK-Maschinentechnik GmbH Boschweg 15 D-48351 Everswinkel Tel. +49 2582/66812-0 Mail: [email protected]
HZK 120, run of torque and force
inside the clutch
W.Jäger, April 2010
Piston
Pressure
plate
Input hydr. pressure
Torque run
Force run
AMSBECK-Maschinentechnik GmbH Boschweg 15 D-48351 Everswinkel Tel. +49 2582/66812-0 Mail: [email protected]
HZK 120, pumpside, half sectionel drawing
W.Jäger, April 2010 AMSBECK-Maschinentechnik GmbH Boschweg 15 D-48351 Everswinkel Tel. +49 2582/66812-0 Mail: [email protected]
HZK 120 compact – technical specifications
W.Jäger, July 2010
• Hydraullic operated multi disc clutch
• 1200 Nm stat.,1100 Nm dyn.
• 25-28 bar operating pressure
• mounting between gear and pump
• compact housing
• flanges integrated in the housing
• radial pressure input
• leakagefree system
• larger dry running disc
• low idle torque
• reduced axial force transmission across taper roller bearings with oil lubrication
• pilot bearing
• no external acting force
• high quality PTFE-seals
• aluminium housing
• SAE-flange or special out of aluminium
• in- and output of shaft according to DIN 5480, DIN 6885, ANSI B92-1, etc.
• completely mounted and tested
AMSBECK-Maschinentechnik GmbH Boschweg 15 D-48351 Everswinkel Tel. +49 2582/66812-0 Mail: [email protected]
HZK 120 compakt, smaller bearings
W.Jäger,July2010 AMSBECK-Maschinentechnik GmbH Boschweg 15 D-48351 Everswinkel Tel. +49 2582/66812-0 Mail: [email protected]
HZK 120 compakt, smaller bearings,
shorter but bigger
W.Jäger, Juni 2010 AMSBECK-Maschinentechnik GmbH Boschweg 15 D-48351 Everswinkel Tel. +49 2582/66812-0 Mail: [email protected]
HZK 250– technical specifications
W.Jäger, July 2010
• Hydraullic operated multi disc clutch
• 2500 Nm stat.,2300 Nm dyn.
• 150 - 180 bar operating pressure
• mounting between gear and cardan shaft
• compact housing
• special flange for assembling at the frame
• radial pressure input
• leakagefree system
• larger dry running disc
• low idle torque
• reduced axial force transmission across closed angular ball bearings
• pilot bearing
• no external acting force
• high quality PTFE-seals
• aluminium housing
• SAE-flange or special one out of aluminium
• in- and output of shaft according to DIN 5480, DIN 6885, ANSI B92-1, etc.
• completely mounted and tested
AMSBECK-Maschinentechnik GmbH Boschweg 15 D-48351 Everswinkel Tel. +49 2582/66812-0 Mail: [email protected]
HZK 250, quarter sectionel drawing
W.Jäger, Juni 2010 AMSBECK-Maschinentechnik GmbH Boschweg 15 D-48351 Everswinkel Tel. +49 2582/66812-0 Mail: [email protected]
HZK 250, half sectionel drawing
W.Jäger, Juni 2010 AMSBECK-Maschinentechnik GmbH Boschweg 15 D-48351 Everswinkel Tel. +49 2582/66812-0 Mail: [email protected]
Angular ball bearing
HZK 250, with special flange for
connection to the frame
W.Jäger, Juni 2010 AMSBECK-Maschinentechnik GmbH Boschweg 15 D-48351 Everswinkel Tel. +49 2582/66812-0 Mail: [email protected]
HZK 250, dimension
W.Jäger, Juni 2010 AMSBECK-Maschinentechnik GmbH Boschweg 15 D-48351 Everswinkel Tel. +49 2582/66812-0 Mail: [email protected]
AMSBECK-Maschinentechnik GmbH Boschweg 15 D-48351 Everswinkel Tel. +49 2582/66812-0 Mail: [email protected] W.Jäger, Febr. 2011
Hydr. actuated multi-disc-clutch
Typ HZK 250
for connection to cardan shaft