HYDRA (IP65 / IP66)Tight enclosures made of glass-fi bre reinforced polyester (GRP)

Z.U.P. EMITER Sp. j.ul. Skrudlak 334-600 LimanowaPoland

tel. 0048 18 337 00 94fax 0048 18 333 76 41

export@emiter.comwww.emiter.com

2016

2

Tight Enclosures HYDRA are applicable, among others, in the energy sector, automation, telecommunication industry, and especially in places with a lar-ge extent of contamination and also places exposed to � ooding (production plants, waste water treatment plants, coastal area). Specially designed con-struction of the enclosure provides e� ective protection of internal devices against the negative in� uence of external factors (dust, corrosive fumes, wa-ter). HYDRA enclosures are made of glass � ber reinforced polyester, they are cor-rosion resistant against the impact of chemicals and solvents.Enclosures HYDRA are available in two versions, depending on the degree of protection IP:• IP65 with 2-point locking system with 2 locks;• IP66 - equipped with 4-point locking system, which includes: tight lock

ZIP66, rod and locking elements, arranged on the perimeter.The doors of enclosure are equipped with polyurethane gasket. It is possible to reverse the door (left/right).

Basic parameters:• temperature operating conditions:

-50 ÷ 85 ºC• � ammability category: V0• protection class: II• halogen-free material

BASIC PARAMETERS

enclosure

• IP 65• full door• lock M22 D5 (2 pcs.)

• IP 65• transparent door• lock M22 D5 (2 pcs.)

• IP 66• full door• lock ZIP66 (1 pcs.)

HYDRA 465 HYDRA T 465 HYDRA 466

HYDRA 685 HYDRA T 685 HYDRA 686

additional equipment

pedestal(FH)

short base(KKH)

polyester mounting plate(PMPH)

steel mounting plate(PMSH)

cover caps(ZHT)

internal doors(DWH)

FH46 KKH46 PMPH 46 PMSH 46 ZHT 46 DWH 46

FH68 KKH68 PMPH 68 PMSH 68 ZHT 68 DWH 68

ENCLOSURE CONFIGURATION

!

!! available soon

3

enclosure typedimensions [mm]

A B C A1 A2 B1 B2 C1 C2 C3HYDRA 465 438 618 251 364 317 556 510 257 209 184HYDRA 685 616 816 323 538 495 750 708 329 281 256

enclosure typedimensions [mm]

A B C A1 A2 A3 B1 B2 B3 C1 C2 C3HYDRA T 465 438 618 251 364 317 243 556 510 448 257 209 184HYDRA T 685 616 816 323 538 495 421 750 708 646 329 281 256

IP 65

ENCLOSURES

C

C1

C3

C2A-A

B

A

B1

A1

A2

B2

4×M

8

B3

A3

A

A

C

C1

C3

C2A-A

B

A

A

A

B1

A1

A2

B2

4×M

8

!

!!

available soon

4

enclosure typedimensions [mm]

A B C A1 A2 B1 B2 C1 C2 C3HYDRA 466 438 618 251 364 317 556 510 270 205 180HYDRA 686 616 816 323 538 495 750 708 342 277 252

IP 66

ENCLOSURES

ACCESSORIES

size of enclosure type of pedestaldimensions of pedestal [mm]

A B C A1 B1 B2HYDRA 46X FH46 431 916 245 396 1534 595HYDRA 68X FH68 609 975 320 528 1791 663

Pedestals (FH)

C

C1

B

A

A

A

C3

C2A-A

B1

A1

A2

B2

4×M

8

5

ACCESSORIES

size of enclosure type of short basedimensions of short base [mm]

A B C B1HYDRA 46X K 40 396 244 245 1155HYDRA 68X KK 53 528 244 320 1353

Short bases (K, KK)

size of enclosure type of short basedimensions of short base [mm]

A B C A1 B1HYDRA 46X KKH46 431 297 245 396 911HYDRA 68X KKH68 609 297 320 528 1109

Short bases (KKH)

Fitting of a second short base

6

Mounting plates (PMPH • PMSH)polyester mounting plate (PMPH)

steel mounting plate(PMSH)

size of enclosure type of plate material of platedimensions of plate [mm]

A B C

HYDRA 46XPMPH 46 poliester 356 542 4PMSH 46 stal 356 542 1,5

HYDRA 68XPMPH 68 poliester 530 736 4PMSH 68 stal 530 736 2

size of enclosure type of cover capHYDRA 46X ZHT 46HYDRA 68X ZHT 68

enclosure HYDRAcover cappress-in fastener

! one set contains 4 pcs. of cover caps

Cover caps (ZHT)

ACCESSORIES

Internal doors (DWH)

size of enclosure door typeHYDRA 46X DWH 46HYDRA 68X DWH 68

7

holder typeUMO K3

holder UMO K3

! one set contains 4 pcs. of holders

Holder for enclosures (UMO K3)

screw M8×16holder

pressed sleeve M8

ACCESSORIES

UN 30 K3UN 20 K3

UPN 20 K3 UPN 30 K3grip type quantity of screws

M8x20 quantity of washers

PS M8x30 PVCUN 20 K3 4 4UN 30 K3 8 8UPN 20 K3 4 4UPN 30 K3 8 8

Grips allowing to fi x cabinets on pole (UN • UPN)

! one set contains 2 pcs. of grips

grip (body)

special washerPS M8×30 PVCscrew M8×20

Lock (M22 D5) Lock (ZIP66)

M22 D5

ZIP66

type 1022-U73 1022-U72 1022-U74 1022-U66 1022-U69

pin end shape

standard option option option optionkey repeatable unrepeatable

enclosure type lock typeHYDRA XX5 M22 D5

typ obudowy typ zamkaHYDRA XX6 ZIP66

Pin end shape

Locks for internal doors (1022)

standard ---------- options ----------

8

ACCESSORIES

Pressure compensation device - ventilation (DA)

Drainage device - conveying the condensate (DD)

DA 084 (IP55)

DD 084 (IP66)

DA 284 (IP66)

technical detailscut-out dimension Ø37+1

tightening torque 5 Nm (10 Nm max.)material plastic, light greyfi lter -surface of air fl ow approx. 1,5 cm²ingress protection IP55

technical detailscut-out dimension Ø50,5+0,5

tightening torque 6 Nm max.material plastic, greywater fl ow-through approx. 200 ml/h at a water column of 5 mmingress protection IP66

typeDD 084 (set: 1 pcs.)

typeDA 084 (set: 2 pcs.)

typeDA 284 (komplet: 2 szt.)technical detailscut-out dimension Ø40,5+0,5

tightening torque 5 Nm (10 Nm max.)material plastic, light greyfi lter waterproof membraneair permeability 1200 l/h at a pressure diff erence of min. 70 mbaringress protection IP66

Example of elements (DA, DD) assembly

DA 084 or DA 284

DD 084

2016

en