Hybrid IP-PBX · 2016. 6. 6. · Model No. KX-NS500 PT Programming Manual ... There are two...

Hybrid IP-PBX

Model No. KX-NS500

PT Programming Manual

Thank you for purchasing this Panasonic product.Please read this manual carefully before using this product and save this manual for future use.

KX-NS500: PFMPR Software File Version 004.10000 or later.

Manuals and supporting information are provided on the Panasonic Web site at:http://panasonic.net/pcc/support/pbx/

WWW.ERTEBATGROUP.COM


http://panasonic.net/pcc/support/pbx/

http://www.ertebatgroup.com



IntroductionAbout this Programming Manual

The PT Programming Manual is designed to serve as a reference to programming the Panasonic IP-PBX usinga Panasonic proprietary telephone (PT) with display.

The PT Programming Manual is divided into the following sections:

Section 1, OverviewProvides an overview of programming the PBX.

Section 2, PT ProgrammingServes as reference operating instructions when using a display PT to programme the PBX.

Feature Programming ReferencesProvides a list of all related PT programming items for each feature.

References Found in the PT Programming ManualPT Programming Manual ReferencesRelated sections of the PT Programming Manual are listed for your reference.

Feature Guide ReferencesThe Feature Guide explains what the PBX can do, as well as how to obtain the most of its many features andfacilities. Sections from the Feature Guide are listed throughout the PT Programming Manual for yourreference.

Links to Other Pages and ManualsIf you are viewing this manual with a PC, certain items are linked to different sections of the PT ProgrammingManual and other IP-PBX manuals. Click on a link to jump to that section.Linked items include:• PT Programming Manual References• Feature Guide References

2 PT Programming Manual

Introduction





Safety NoticesPlease observe the safety notices in this manual in order to avoid danger to users or other people, and preventdamage to property.The notices are classified as follows, according to the severity of injury or damage:

WARNING This notice means that misuse could result in deathor serious injury.

CAUTION This notice means that misuse could result in injuryor damage to property.

WARNINGUnplug the PBX from the AC outlet if it emits smoke, an abnormal smell or makes unusual noise.These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact anauthorised Panasonic Factory Service Centre.

NOTES• The contents of this manual apply to PBXs with a certain software version, as indicated on the cover of

this manual. To confirm the software version of your PBX, see [190] Main Processing (MPR) SoftwareVersion Reference.

• Some optional hardware, software, and features are not available in some countries/areas, or for somePBX models. Please consult your certified Panasonic dealer for more information.

• Product specifications are subject to change without notice.• Throughout this manual, PT displays and other displays are shown in English. Other languages may be

available, depending on the country or area.• In this manual, the suffix of each model number (e.g., KX-NS500NE) is omitted unless necessary.

PT Programming Manual 3

Introduction





Table of Contents1 Overview ...................................................................................................91.1 Introduction .....................................................................................................................101.1.1 Introduction .....................................................................................................................10

Ways to Programme ....................................................................................................101.1.2 Password Security ..........................................................................................................111.1.3 Entering Characters .......................................................................................................12

2 PT Programming ....................................................................................172.1 PT Programming .............................................................................................................182.1.1 Programming Instructions ..............................................................................................182.1.2 Slot Number and Port Number .......................................................................................212.1.3 Basic Programming ........................................................................................................22

[000] Date & Time ........................................................................................................22[001] System Speed Dialling Number ..........................................................................22[002] System Speed Dialling Name .............................................................................22[003] Extension Number ..............................................................................................22[004] Extension Name .................................................................................................23[005] Extension Personal Identification Number (PIN) ................................................23[006] Operator Assignment ..........................................................................................23[007] DSS Console Paired Telephone .........................................................................23[008] Absent Message .................................................................................................24[010] Charge Margin ....................................................................................................24[011] Charge Tax .........................................................................................................24[012] Charge Rate per Unit ..........................................................................................24

2.1.4 System Management Programming ...............................................................................25[100] Flexible Numbering .............................................................................................25[101] Time Service Switching Mode ............................................................................25[102] Time Service Starting Time ................................................................................25[103] Idle Line Access (Local Access) .........................................................................26[110] System Password for Administrator—for PT Programming ...............................26[111] System Password for User—for PT Programming .............................................26[112] Manager Password .............................................................................................26[120] Verification Code ................................................................................................26[121] Verification Code Name ......................................................................................27[122] Verification Code Personal Identification Number (PIN) .....................................27[123] Verification Code COS Number ..........................................................................27[130] Decimal Point Position for Currency ...................................................................27[131] Currency .............................................................................................................27[190] Main Processing (MPR) Software Version Reference ........................................28[191] IP Address Reference ........................................................................................28[194] UM Auto Configuration .......................................................................................28

2.1.5 Timer Programming ........................................................................................................29[200] Hold Recall Time ................................................................................................29[201] Transfer Recall Time ..........................................................................................29[203] Intercept Time .....................................................................................................29[204] Hot Line Waiting Time ........................................................................................29[205] Automatic Redial Repeat Times .........................................................................29[206] Automatic Redial Interval ....................................................................................29[207] Door Unlock Time ...............................................................................................30[208] Call Duration Count Starting Time for LCOT ......................................................30[209] DISA Delayed Answer Time ...............................................................................30[210] DISA Trunk-to-Trunk Call Prolong Time .............................................................30


Table of Contents





[211] DISA Intercept Time ...........................................................................................302.1.6 TRS/Barring/ARS Programming .....................................................................................31

[300] TRS/Barring Override by System Speed Dialling ...............................................31[301] TRS/Barring Denied Code ..................................................................................31[302] TRS/Barring Exception Code .............................................................................31[303] Special Carrier Access Code ..............................................................................31[304] Emergency Number ............................................................................................31[320] ARS Mode ..........................................................................................................31[321] ARS Leading Number .........................................................................................32[322] ARS Routing Plan Table Number .......................................................................32[325] ARS Exception Number ......................................................................................32[330] ARS Routing Plan Time Table ............................................................................32[331–346] ARS Routing Plan Table (1–16) .................................................................33[347] ARS Routing Plan Table (1–48) .........................................................................33[350] ARS Carrier Name ..............................................................................................33[351] ARS Trunk Group for Carrier Access .................................................................33[352] ARS Removed Number of Digits for Carrier Access ..........................................33[353] ARS Carrier Access Code ..................................................................................34

2.1.7 Trunk Programming ........................................................................................................35[400] LCOT/BRI Trunk Connection ..............................................................................35[401] LCOT/BRI Trunk Name ......................................................................................35[402] LCOT/BRI Trunk Group Number ........................................................................35[409] LCOT/BRI Trunk Number Reference .................................................................35[410] LCOT Dialling Mode ...........................................................................................35[411] LCOT Pulse Rate ...............................................................................................35[412] LCOT DTMF Minimum Duration .........................................................................36[413] LCOT CPC Signal Detection Time—Outgoing ...................................................36[414] LCOT CPC Signal Detection Time—Incoming ...................................................36[415] LCOT Reverse Circuit ........................................................................................36[416] LCOT Pause Time ..............................................................................................36[417] LCOT Flash/Recall Time ....................................................................................36[418] LCOT Disconnect Time ......................................................................................37[420] BRI Network Type ..............................................................................................37[421] BRI DIL/DDI/MSN Selection ...............................................................................37[422] BRI Subscriber Number ......................................................................................37[424] BRI Layer 1 Active Mode ....................................................................................37[425] BRI Layer 2 Active Mode ....................................................................................37[426] BRI Configuration ...............................................................................................38[427] BRI TEI Mode .....................................................................................................38[450] DIL 1:1 Destination .............................................................................................38[451] DID Number ........................................................................................................38[452] DID Name ...........................................................................................................38[453] DID Destination ..................................................................................................39[471] Host PBX Access Code ......................................................................................39[472] Extension-to-Trunk Call Duration .......................................................................39[473] Trunk-to-Trunk Call Duration ..............................................................................39[475] DISA Silence Detection ......................................................................................39[476] DISA Continuous Signal Detection .....................................................................39[477] DISA Cyclic Signal Detection .............................................................................40[490] Caller ID Signal Type ..........................................................................................40

2.1.8 COS Programming .........................................................................................................41[500] Trunk Group Number ..........................................................................................41[501] TRS/Barring Level ..............................................................................................41[502] Trunk Call Duration Limitation ............................................................................41[503] Call Transfer to Trunk .........................................................................................41


Table of Contents





[504] Call Forwarding to Trunk ....................................................................................41[505] Executive Busy Override ....................................................................................42[506] Executive Busy Override Deny ...........................................................................42[507] DND Override .....................................................................................................42[508] Account Code Mode ...........................................................................................42[509] TRS/Barring Level for System Speed Dialling ....................................................42[510] TRS/Barring Level for Extension Dial Lock ........................................................42[511] Manager Assignment ..........................................................................................42[512] Permission for Door Open Access .....................................................................43[514] Time Service Manual Switching .........................................................................43[515] Wireless XDP Parallel Mode for Paired Telephone ............................................43[516] Programming Mode Limitation ............................................................................43

2.1.9 Extension Programming .................................................................................................44[600] EXtra Device Port (XDP) Mode ..........................................................................44[601] Terminal Device Assignment ..............................................................................44[602] Class of Service ..................................................................................................44[603] Extension User Group ........................................................................................44[604] Extension Intercept Destination ..........................................................................45[605] Call Forwarding—No Answer Time ....................................................................45[606] CLIP/COLP Number ...........................................................................................45[620] Incoming Call Distribution Group Member ..........................................................45[621] Incoming Call Distribution Group Delayed Ringing ............................................45[622] Incoming Call Distribution Group Floating Extension Number ...........................46[623] Incoming Call Distribution Group Name .............................................................46[624] Incoming Call Distribution Group Distribution Method ........................................46[625] Destination for Overflow Time Expiration ...........................................................46[626] Overflow Time ....................................................................................................46[627] Destination When All Busy .................................................................................47[628] Queuing Call Capacity ........................................................................................47[629] Queuing Hurry-up Level .....................................................................................47[630] Queuing Time Table ...........................................................................................47[631] Sequences in Queuing Time Table ....................................................................47[632] Maximum Number of Agents ..............................................................................48[640] Extension User Groups of a Paging Group ........................................................48[641] External Pagers of a Paging Group ....................................................................48[650] Extension User Groups of a Pickup Group .........................................................48[660] UM Group Floating Extension Number ...............................................................49[661] VM Group Floating Extension Number ...............................................................49[680] Idle Extension Hunting Type ...............................................................................49[681] Idle Extension Hunting Group Member ..............................................................49[690] PS Registration ...................................................................................................49[691] PS Termination ...................................................................................................50[692] Personal Identification Number (PIN) for PS Registration ..................................50[699] CS Status Reference ..........................................................................................50

2.1.10 Resource/Interface Programming ..................................................................................51[700] External Pager Floating Extension Number .......................................................51[711] Music on Hold .....................................................................................................51[712] Music for Transfer ...............................................................................................51[720] Doorphone Call Destination ................................................................................51[729] Doorphone Number Reference ..........................................................................51[730] Outgoing Message (OGM) Floating Extension Number .....................................52[731] Outgoing Message (OGM) Name .......................................................................52[732] DISA Security Mode ...........................................................................................52

2.1.11 SMDR & Maintenance Programming .............................................................................53[801] External Modem Control .....................................................................................53


Table of Contents





[802] SMDR Page Length ............................................................................................53[803] SMDR Skip Perforation ......................................................................................53[804] SMDR Outgoing Call Printing .............................................................................53[805] SMDR Incoming Call Printing .............................................................................53[810] Remote Programming ........................................................................................53[811] Modem Floating Extension Number ...................................................................54[812] ISDN Remote Floating Extension Number .........................................................54

2.1.12 Card Programming .........................................................................................................55[900] Slot Card Type Reference ..................................................................................55[901] Slot Card Deletion ..............................................................................................55[902] Slot Card Reset ..................................................................................................55[914] Expansion Unit Deletion .....................................................................................55

2.2 Revision History ..............................................................................................................562.2.1 PFMPR Software File Version 004.1xxxx ......................................................................56

Feature Programming References .............................................................57


Table of Contents






Table of Contents





Section 1Overview

This section provides an overview of programming thePBX.






1.1 Introduction

1.1.1 IntroductionThese programming instructions are designed to serve as an overall system programming reference for thePanasonic IP-PBX. Each feature in the PBX has default settings that can be changed to customise the PBXto your requirements. These settings control the functions of the PBX, and changing them is referred to as"system programming".Only one person can perform system programming at a time. Any other users trying to enter systemprogramming mode will be denied access.

Ways to ProgrammeThere are two programming methods:• PC (Personal Computer) Programming

All features and settings of the PBX can be programmed through PC programming with MaintenanceConsole. Installing and starting Maintenance Console are explained in the Installation Manual.

• PT (Proprietary Telephone) ProgrammingA subset of the features and settings of the PBX can be programmed using a PT. PT programming isdescribed in Section 2.1 PT Programming. An extension user can perform system programming byentering three-digit programming numbers with a PT.


1.1.1 Introduction





1.1.2 Password SecurityTo maintain system security, system passwords are required to access certain programming functions of thePBX. By giving different users access to different passwords, it is possible to control the amount ofprogramming that each user is able to perform.The following types of system passwords are available:

Password Description Format

System Password (PT) forUser

Used to access user-level PT programming. The specific PTprogramming items that may be programmed at user levelcan be selected through system programming.

4–10 digits

System Password (PT) forAdministrator

Used to access administrator-level PT programming. All PTprogramming settings are available.

CAUTIONTo the Administrator or Installer regarding the system password1. Please provide all system passwords to the customer.2. To avoid unauthorised access and possible abuse of the PBX, keep the passwords secret, and inform

the customer of the importance of the passwords, and the possible dangers if they become known toothers.

3. The PBX has default passwords preset. For security, change these passwords the first time that youprogramme the PBX.

4. Change the passwords periodically.5. It is strongly recommended that passwords of 10 numbers or characters be used for maximum

protection against unauthorised access. For a list of numbers and characters that can be used in systempasswords, refer to Section 1.1.3 Entering Characters.


1.1.2 Password Security





1.1.3 Entering CharactersThe following characters can be used when storing a name, message, or other text entry data using a PT. Thetables below show you the characters available by pushing each button a specific number of times.

NoteFor NE models, the tables for Option mode differ depending on the Area Code selected in Easy Setup.

Table 1 (Standard mode)


1.1.3 Entering Characters





Table 1 (Standard mode for RU/UC model)

Table 2 (Option mode)







Table 2 (Option mode for NE model)

Table 2 (Option mode for Greece)







Table 2 (Option mode for RU/UC model)

[Example of Entering Characters]To enter "Ann":

A n n

6 (5 times) 6 (5 times)2 OR

FWD/DND

Note• To erase the character on the cursor, press CLEAR.• To move the cursor to the left, press .• To move the cursor to the right, press . When entering two or more characters that use the same

button consecutively (e.g., "G" and "I"), you must press this button or the FWD/DND button afterentering the first character.

• If SELECT is pressed, the characters for each button will be displayed in reverse order.• To toggle between Table 1 and Table 2 when using the KX-DT300/KX-DT500/KX-NT300/KX-NT500/

KX-T7600 series, press the leftmost soft button.







Section 2PT Programming

This section serves as reference operating instructionswhen using a display PT to programme the PBX.






2.1 PT Programming

2.1.1 Programming InstructionsRequired Telephone/Extension

PBX settings can be customised through system programming by using a multi-line display Digital ProprietaryTelephone (DPT) or IP Proprietary Telephone (IP-PT), such as the KX-NT343, KX-NT346 or KX-NT500 series.Multi-line display Analogue Proprietary Telephones (APTs) are not supported. To access system programming,the Class of Service (COS) assigned to the PT’s extension must be programmed to allow system programming,or the PT must be connected to the lowest-numbered port on the card installed in the lowest-numbered slot.Only one system programming session can be performed at a time. This means that only one user can accesssystem programming at a time, whether through a PT or PC.For a list of characters that can be entered during system programming, see Section 1.1.3 EnteringCharacters.

Buttons and Functions

Fixed ButtonsFunctionKX-DT300/KX-DT500

KX-NT300/KX-NT500 KX-T7600 KX-T7400/KX-T7500*1

REDIAL PREVIOUS

SP-PHONE NEXT

FWD/DND (Page up)

CONF (Page down)

AUTO DIAL

STORE

ENTER

— Back to Previous Menu(CANCEL)

SHIFT SHIFT SHIFT SHIFT

PAUSE PAUSE

PROGRAM PAUSE

PROGRAM

HOLD HOLD END

AUTO ANS

MUTE

MESSAGE

MUTE

AUTO ANSWER MESSAGE SELECT


2.1.1 Programming Instructions





Fixed ButtonsFunctionKX-DT300/KX-DT500

KX-NT300/KX-NT500 KX-T7600 KX-T7400/KX-T7500*1

FLASH/RECALL FLASH FLASH

TRANSFER

TRANSFERCLEAR

INTERCOM

INTERCOMSECRET

*1 The buttons shown in this column are from the KX-T7400 series.

Entering System Programming ModeUsing a PT to perform system programming allows an authorised extension user to set a wide range of PBXfeatures and parameters.There are two levels of system programming that can be performed with a PT: administrator-level programmingand user-level programming.

Administrator Level:Allows the programming of all settings accessible through PT programming.

PROGRAM/ PAUSE

#

= 1234

System Password for AdministratorProgramming No.

3 digits

—for PT Programming

User Level:Allows the programming of limited settings as permitted through PC programming.

= 1234

Programming No.

3 digits

System Password for User

—for PT ProgrammingPROGRAM/

PAUSE

Note means default value throughout this manual.

Programming StructureProgramming

Number Programming Group Title Description

[0XX] Basic Programming Frequently used programming steps

[1XX] System ManagementProgramming

Global system parameters

[2XX] Timer Programming System timers







ProgrammingNumber Programming Group Title Description

[3XX] TRS/Barring/ARS Programming TRS/Barring and Automatic Route Selection (ARS)programming

[4XX] Trunk Programming Trunk, trunk group, and BRI line settings

[5XX] COS Programming Class of Service parameters

[6XX] Extension Programming Extension feature settings

[7XX] Resource/InterfaceProgramming

PBX interface and external device settings

[8XX] SMDR & MaintenanceProgramming

Station Message Detail Recording (SMDR) andmaintenance feature settings

[9XX]Card Programming Used to display the cards currently installed in the

PBX, or to delete a card from system programmingbefore physically removing it.







2.1.2 Slot Number and Port NumberSome programming items require a slot number and port number to be entered, as in the examples below.

[410]DTMF/Pulse

ENDSELECT

ENTER ENTER

Slot No. Port No.

[699]END

Slot No.Reference only

CS Status

ENTER

Port No.

Slot numbers are entered as three-digit numbers of the form "XYY":• X: Shelf number (1–4) (1: Main Unit, 2–4: Expansion Unit)• YY: Slot number (01–07)(e.g. "102" for Main unit slot 2)

Port numbers are entered as two-digit numbers (e.g., "04" for port 4).

PBX Model Free Slot Number

KX-NS500 101–107

201–205

301–305

401–405


2.1.2 Slot Number and Port Number





2.1.3 Basic Programming[000] Date & Time

[In 12-hour Format]

[000]00–35

Year

01–31

Date

01–12

Hour

00–59

Minute

END

(HOLD)

ENTER ENTER

ENTER

01–12

Month

NEXTAM/PM

SELECT

(AUTO ANS/MESSAGE)

[In 24-hour Format]

[000]00–35

Year

01–31

Date

00–23

Hour

00–59

Minute

END

(HOLD)

ENTER ENTER

ENTER

01–12

Month

NEXT

[001] System Speed Dialling Number

[001]000–999

Speed Dialling No. Telephone No.

Max. 32 digits END

ENTER ENTER

CANCEL

NEXT

To the Next Speed Dialling No.

To the Desired Speed Dialling No.

[002] System Speed Dialling Name

[002] Name

Max. 20 characters000-999 ENDENTER ENTER

Speed Dialling No.

[003] Extension Number

[003] New Extn. No.END

Current Extn. No.

ENTER ENTER1–5 digits 1–5 digits


2.1.3 Basic Programming





NoteIf PC Phone, PC Console, or a CTI application is running on a PC connected to an extension whoseextension number is to be programmed/modified, quit the application first.

[004] Extension Name

[004] Name

Max. 20 characters END

Extn. No.

ENTER ENTER1–5 digits

[005] Extension Personal Identification Number (PIN)

[005]ENDMax. 10 digits

PIN

ENTER ENTER

Extn. No.1–5 digits

CAUTIONThere is a risk that fraudulent telephone calls will be made if a third party discovers a personal identificationnumber (PIN) (verification code PIN or extension PIN) of the PBX.The cost of such calls will be billed to the owner/renter of the PBX.To protect the PBX from this kind of fraudulent use, we strongly recommend:a. Keeping PINs secret.b. Selecting complex, random PINs that cannot be easily guessed.c. Changing PINs frequently.

[006] Operator Assignment

[006]END

Extn. No.

ENTER ENTER1 Day/2 Lunch/

3 Break/4 Night

Time Mode1–5 digits

[007] DSS Console Paired Telephone

[007] DSS Console No.END

ENTER ENTER

Extn. No.

1–5 digits01–08

Note• This programme is only available after the port connected to the DSS Console is assigned as "DSS

Console" in [601] Terminal Device Assignment.• Note that if one or more SDN buttons have been set at the DSS Console, they must be deleted before

this setting can be changed.







[008] Absent Message

[008]1–8

Location No.END

Message

ENTER ENTERMax. 16 characters

[010] Charge Margin

[010]2+2 decimal places

Margin XX.YY%END

ENTER ENTER

[011] Charge Tax

[011]01–03

Location No.2+2 decimal places

Tax XX.YY%END

ENTER ENTER

[012] Charge Rate per Unit

[012] Trunk Group No.

Max. 8 digits

including decimal point

Charge RateEND

ENTER ENTER01–64







2.1.4 System Management Programming[100] Flexible Numbering

[100]01–68

Location No. Feature No.END

(HOLD)ENTER ENTER

CANCEL

NEXT

To the Next Location No.

To the Desired Location No.

1–4 digits

[101] Time Service Switching Mode

[101]

Manual/Automatic

END

SELECT

(AUTO ANS/MESSAGE)

ENTER ENTER

[102] Time Service Starting Time[In 12-hour Format]

[102]

01:00–12:59

Hour:MinuteEND

ENTER

ENTER

Day No. Time Mode0 Sun/1 Mon/

2 Tue/3 Wed/

4 Thu/5 Fri/6 Sat

1 Day-1/2 Lunch/

3 Day-2/4 Night

Page up

NEXT

To the Next Time Mode

To the Next Day No.

AM/PM

SELECT


2.1.4 System Management Programming





[In 24-hour Format]

[102]00:00–23:59

Hour:MinuteEND

ENTER ENTER

Day No. Time Mode0 Sun/1 Mon/

2 Tue/3 Wed/

4 Thu/5 Fri/6 Sat

1 Day-1/2 Lunch/

3 Day-2/4 Night

Page up

NEXT

To the Next Time Mode

To the Next Day No.

[103] Idle Line Access (Local Access)

[103] Location No. Trunk Group No.END

ENTER ENTER01–64 01–64

[110] System Password for Administrator—for PT Programming

[110]4–10 digits

PasswordEND

ENTER ENTER1234

[111] System Password for User—for PT Programming

[111]4–10 digits

PasswordEND

ENTER ENTER1234

[112] Manager Password

[112]4–10 digits

PasswordEND

ENTER ENTER1234

[120] Verification Code

[120]0001–1000

Location No.1–4 digits

Verification CodeEND

ENTER ENTER







[121] Verification Code Name

[121]0001–1000

Location No.Max. 20 characters

NameEND

ENTER ENTER

[122] Verification Code Personal Identification Number (PIN)

[122]0001–1000

Location No.Max. 10 digits

PINEND

ENTER ENTER

CAUTIONThere is a risk that fraudulent telephone calls will be made if a third party discovers a personal identificationnumber (PIN) (verification code PIN or extension PIN) of the PBX.The cost of such calls will be billed to the owner/renter of the PBX.To protect the PBX from this kind of fraudulent use, we strongly recommend:a. Keeping PINs secret.b. Selecting complex, random PINs that cannot be easily guessed.c. Changing PINs frequently.

[123] Verification Code COS Number

[123]0001–1000

Location No.01–64

COS No.END

ENTER ENTER

[130] Decimal Point Position for Currency

[130]0–6

Desired No.END

ENTER ENTER

[131] Currency

[131]3 characters

CurrencyEND

ENTER ENTER







[190] Main Processing (MPR) Software Version Reference

[190]1: For MPR(Main Unit)2: For SPR1(Expansion Unit-1)3: For SPR2(Expansion Unit-2)4: For SPR3(Expansion Unit-3)

Expansion Unit No.

Reference only

MPR/SPR VersionEND

ENTER

[191] IP Address Reference

[191]1: MPR LAN2: MPR-MNT3: DSP14: DSP2

Mode No.Reference only

IP AddressEND

ENTER ENTER

[194] UM Auto Configuration

[194]1: User/UM Execute

2: UM Execute

Mode No.Press Soft Key

Yes/NoEND

ENTER

NoteAutomatically starts creating mailboxes when executed.• Note that it may take some time (e.g., about 30 seconds for 10 mailboxes, and about 300 seconds for

100 mailboxes) for completing mailbox creation. The confirmation tone will be heard and "Complete"will be displayed on the LCD when the process finished.

• In case that some mailboxes are in use or UM System Maintenance is active, the creating mailboxesare terminated. The error tone will be heard and "Rejected" will be displayed on the LCD. Try to executethe process again after a while.







2.1.5 Timer Programming[200] Hold Recall Time

[200]0–240 s

TimeEND

(HOLD)ENTER ENTER

[201] Transfer Recall Time

[201]END

ENTER ENTER1–240 s

Time

[203] Intercept Time

[203]END

ENTER ENTER1–240 s

Time1 Day/2 Lunch

3 Break/4 Night

Time Mode

[204] Hot Line Waiting Time

[204]0–15 s

TimeEND

ENTER ENTER

[205] Automatic Redial Repeat Times

[205]0–10

Number of TimesEND

ENTER ENTER

[206] Automatic Redial Interval

[206](1–120) ×10 s

Time

ENDENTER ENTER


2.1.5 Timer Programming





[207] Door Unlock Time

[207]2–7 s

TimeEND

ENTER ENTER

[208] Call Duration Count Starting Time for LCOT

[208]0–60 s

TimeEND

ENTER ENTER

[209] DISA Delayed Answer Time

[209]0–30 s

TimeEND

ENTER ENTER

[210] DISA Trunk-to-Trunk Call Prolong Time

[210]0–7 min

TimeEND

ENTER ENTER

[211] DISA Intercept Time

[211]0–60 s

TimeEND

ENTER ENTER

1 Day/2 Lunch

3 Break/4 Night

Time Mode


2.1.5 Timer Programming





2.1.6 TRS/Barring/ARS Programming[300] TRS/Barring Override by System Speed Dialling

[300]Disable/Enable

END

(HOLD)

SELECT

(AUTO ANS/MESSAGE)

ENTER ENTER

[301] TRS/Barring Denied Code

ENTER ENTER

[301]2–6

Level No.Max. 16 digits

Denied Code001–100

Location No.END

CANCEL

NEXT

To the Next Location No.

To the Desired Location No.

[302] TRS/Barring Exception Code

[302]2–6

Level No.Max. 16 digits

Exception Code

001–100

Location No.END

ENTER ENTER

[303] Special Carrier Access Code

[303]Max. 16 digits

Carrier Access CodeLocation No.END

ENTER ENTER

01–20

[304] Emergency Number

[304]Max. 32 digits

Emergency No.

01–10

Location No.END

ENTER ENTER

[320] ARS Mode

[320] Off/Idle Line/

All Access

END

SELECT

ENTER ENTER


2.1.6 TRS/Barring/ARS Programming





[321] ARS Leading Number

[321]0001–1000

Location No.

Max. 16 digits

Leading No.END

ENTER ENTER

[322] ARS Routing Plan Table Number

[322]0001–1000

Location No. Plan Table No.END

ENTER ENTER01–48

[325] ARS Exception Number

[325]001–200

Location No.

Max. 16 digits

Exception No.END

ENTER ENTER

[330] ARS Routing Plan Time Table[In 12-hour Format]

Plan Table No.

01–12/00–59

Hour:Minute

0 Sun/1 Mon/2 Tue/

3 Wed/4 Thu/5 Fri/6 Sat

Day No.

END

1 TimeA/2 TimeB/

3 TimeC/4 TimeD

ARS Time No.

ENTER

ENTER

[330]

AM/PM

SELECT

01–48

[In 24-hour Format]

Plan Table No.

00–23/00–59

Hour:Minute

0 Sun/1 Mon/2 Tue/


Day No.

END

1 TimeA/2 TimeB/

3 TimeC/4 TimeD

ARS Time No.

ENTER

ENTER

[330]

01–48







[331–346] ARS Routing Plan Table (1–16)

[331–346] Day No.

01–48/None

Carrier Table No.

1 TimeA/2 TimeB/

3 TimeC/4 TimeD

ARS Time No.

END

1–6

Priority

ENTER

ENTER

0 Sun/1 Mon/2 Tue/


[347] ARS Routing Plan Table (1–48)

01–48

Plan Table No.

END

1 TimeA/2 TimeB/

3 TimeC/4 TimeD

ARS Time No.

ENTER

ENTER

[347]1–6

Priority

01–48/None

Carrier Table No.

[350] ARS Carrier Name

[350] Carrier Table No.

Max. 20 characters

NameEND

ENTER ENTER01–48

[351] ARS Trunk Group for Carrier Access

SELECT[351] Carrier Table No. Trunk Group No.

END

ENTER ENTER

SELECT

Disable/

Enable

01–48 01–64

[352] ARS Removed Number of Digits for Carrier Access


0–15

Digits to RemoveEND

ENTER ENTER01–48







[353] ARS Carrier Access Code


Max. 32 digits

Carrier Access CodeEND

ENTER ENTER 01–48







2.1.7 Trunk Programming[400] LCOT/BRI Trunk Connection

ENTER ENTER

[400]No Connect/

Connect

END

(HOLD)

SELECT

(AUTO ANS/MESSAGE)

CANCELNEXT

To the Next Port No.To the Desired Port No.

Slot No. Port No.

[401] LCOT/BRI Trunk Name

[401]Max. 20 characters

NameEND

ENTER ENTER3 digits

Trunk No.

[402] LCOT/BRI Trunk Group Number

[402]3 digits

Trunk Group No.

END

ENTERENTER

Trunk No.

01–64

[409] LCOT/BRI Trunk Number Reference

[409]Reference only

Slot No. Port No. Trunk No.END

ENTER

[410] LCOT Dialling Mode

[410]DTMF/Pulse

ENDSELECT

ENTER ENTER

Slot No. Port No.

[411] LCOT Pulse Rate

[411]Low/High ENDSELECT

ENTER ENTER

Slot No. Port No.


2.1.7 Trunk Programming





[412] LCOT DTMF Minimum Duration

[412]80/160 ms ENDSELECT

ENTER ENTER

Slot No. Port No.

[413] LCOT CPC Signal Detection Time—Outgoing

[413]0: None/1: 6.5/

2–113: (N–1)×8 ms

END

ENTER ENTER

Slot No. Port No. Mode No.

[414] LCOT CPC Signal Detection Time—Incoming

[414]END

ENTER ENTER

0: None/1: 6.5/

2–113: (N–1)×8 ms

Slot No. Port No. Mode No.

[415] LCOT Reverse Circuit

[415] Disable/

Outgoing/Both Call

ENDSELECT

ENTER ENTER

Slot No. Port No.

[416] LCOT Pause Time

[416] 1.5/2.5/

3.5/4.5 s

ENDSELECT

ENTER ENTER

Slot No. Port No.

[417] LCOT Flash/Recall Time

[417]None/80/96/112/

300/600/900/

1200 ms/option

ENDSELECT

ENTER ENTER

Slot No. Port No.







[418] LCOT Disconnect Time

[418]0.5/1.5/2.0/

4.0/12.0 s

ENDSELECT

ENTER ENTER

Slot No. Port No.

[420] BRI Network Type

ENTER ENTER

[420] Slot No. Port No.

00–56

Network TypeEND

[421] BRI DIL/DDI/MSN Selection


DIL/DDI/MSNEND

SELECT

ENTER ENTER

[422] BRI Subscriber Number

[422] Slot No. Port No.Max. 16 digits

Subscriber No.END

ENTER ENTER

[424] BRI Layer 1 Active Mode

[424] Slot No. Port No. Permanent/

Call by call

ENDSELECT

ENTER ENTER

NoteAfter changing this setting, perform [902] Slot Card Reset to enable the new setting.

[425] BRI Layer 2 Active Mode

[425] Slot No. Port No. Permanent/

Call by call

ENDSELECT

ENTER ENTER








[426] BRI Configuration


P-P/P-MPEND

SELECT

ENTER ENTER


[427] BRI TEI Mode

ENTERENTER


00–63 (for Fix)/

TEIEND

ENTERClear (for Automatic)


[450] DIL 1:1 Destination

[450]

END

ENTER

ENTER

Time Mode Slot No. Port No. Destination No.1 Day/2 Lunch/

3 Break/4 Night

1–5 digits

[451] DID Number

[451]0001–1000

Location No.Max. 32 digits

DDI/DID No.END

ENTER ENTER

[452] DID Name

[452]0001–1000

Location No.Max. 20 characters

NameEND

ENTER ENTER







[453] DID Destination

[453]0001–1000

Location No. Destination No.END

ENTER ENTER

1 Day/2 Lunch/

3 Break/4 Night

Time Mode1–5 digits

[471] Host PBX Access Code


01–10

Location No.

Max.10 digits

Host PBX Access CodeEND

ENTER

ENTER

01–64

[472] Extension-to-Trunk Call Duration


01–60 min

TimeEND

ENTER ENTER01–64

[473] Trunk-to-Trunk Call Duration

[473] Trunk Group No.01–60 min

TimeEND

ENTER ENTER01–64

[475] DISA Silence Detection

ENTER ENTER


No Detect/

Detect

ENDSELECT

01–64

[476] DISA Continuous Signal Detection


No Detect/

Detect

ENDSELECT

ENTER ENTER01–64







[477] DISA Cyclic Signal Detection


No Detect/

Detect

ENDSELECT

ENTER ENTER

01–64

[490] Caller ID Signal Type

ENTER ENTER

[490] Slot No. FSK/FSK with

Visual Caller ID/DTMF

SELECTEND







2.1.8 COS Programming[500] Trunk Group Number

[500]1 Day/2 Lunch/

3 Break/4 Night

01–64

COS No.Time Mode

Trunk Group No.

Disable/Enable

END

(HOLD)

SELECT

(AUTO ANS/MESSAGE)

ENTER

ENTER

NEXT

To the Next

Trunk Group

No.

To the Next

COS No.

Page up

01–64

[501] TRS/Barring Level

[501]01–64

COS No.Time Mode1–7

LevelEND

ENTER ENTER1 Day/2 Lunch/

3 Break/4 Night

[502] Trunk Call Duration Limitation

[502]01–64

COS No.END

ENTER ENTER

SELECT

Disable/

Enable

[503] Call Transfer to Trunk

[503]01–64

COS No.END Disable/

Enable

SELECT

ENTER ENTER

[504] Call Forwarding to Trunk

Disable/

Enable

SELECT[504]

01–64

COS No.END

ENTER ENTER


2.1.8 COS Programming





[505] Executive Busy Override

SELECT

Disable/

Enable

[505]01–64

COS No.END

ENTER ENTER

[506] Executive Busy Override Deny

Disable/

Enable

SELECT

ENTER ENTER

[506]01–64

COS No.END

[507] DND Override

SELECT

Disable/

Enable

[507]01–64

COS No.END

ENTER ENTER

[508] Account Code Mode

[508]01–64

COS No.END Option/

Forced

SELECT

ENTER ENTER

[509] TRS/Barring Level for System Speed Dialling

[509]01–64

COS No.1–7

TRS/Barring LevelEND

ENTER ENTER

[510] TRS/Barring Level for Extension Dial Lock

[510]01–64

COS No.1–7 END

ENTER ENTER

TRS/Barring Level

[511] Manager Assignment

[511]01–64

COS No.END Disable/Enable

SELECT

ENTER ENTER







[512] Permission for Door Open Access

Disable/

Enable

SELECT[512]01–64

COS No.END

ENTER ENTER

[514] Time Service Manual Switching

[514]01–64

COS No.END Disable/

Enable

SELECT

ENTER ENTER

[515] Wireless XDP Parallel Mode for Paired Telephone

SELECT

Disable/

Enable

[515]01–64

COS No.END

ENTER ENTER

[516] Programming Mode Limitation

[516]01–64

COS No.END Disable/Personal/

System&Personal

SELECT

ENTER ENTER







2.1.9 Extension Programming[600] EXtra Device Port (XDP) Mode


Off/On

END

(HOLD)

SELECT

(AUTO ANS/MESSAGE)

ENTER ENTER

CANCEL

NEXT

To the Next Port No.

To the Desired Port No.

[601] Terminal Device Assignment


Telephone/

DSS Console 01–08/

Voice Mail 1–(01–12)/

Voice Mail 2–(01–12)

ENDSELECT

ENTER ENTERSee below

NoteWhen changing the type of a port for which one or more SDN buttons are set (except when changingbetween PC Console and Telephone), all SDN buttons customised for that device will be deleted.

[602] Class of Service

[602]01–64

COS No.END

ENTER ENTER

Extn. No.

1–5 digits

[603] Extension User Group

[603] Extn. User Group No.

END

ENTER ENTER

Extn. No.

1–5 digits 001–032


2.1.9 Extension Programming





[604] Extension Intercept Destination

[604]Max. 32 digits

Destination No.1 Day/2 Lunch/

3 Break/4 Night

ENDENTER ENTER

Time Mode Extn. No.1–5 digits

[605] Call Forwarding—No Answer Time

[605]0–120 s

TimeEND

ENTER ENTER


[606] CLIP/COLP Number

[606]Max. 16 digits

CLIP/COLP No.END

ENTER ENTER


[620] Incoming Call Distribution Group Member

[620] Location No.Incoming Call

Distribution

Group No.

END

ENTER

ENTER

Extn. No.

001–128

1–5 digits001–128

[621] Incoming Call Distribution Group Delayed Ringing

[621] Location No.

END

Immediate/

1–6 (rings)/

No ring

SELECT

ENTER

ENTER

Incoming Call

Distribution

Group No.

001–128

001–128







[622] Incoming Call Distribution Group Floating Extension Number

[622]END

ENTER ENTER

Extn. No.Incoming Call

Distribution

Group No.001–128

1–5 digits

[623] Incoming Call Distribution Group Name

[623]Max. 20 characters

NameEND

ENTER ENTER

Incoming Call

Distribution

Group No.

001–128

[624] Incoming Call Distribution Group Distribution Method

[624]END Ring/UCD/

Priority Hunt

SELECT

ENTER ENTER

Incoming Call

Distribution

Group No.

001–128

[625] Destination for Overflow Time Expiration

[625]1 Day/2 Lunch/

3 Break/4 Night

Max. 32 digits

Destination No.

END

ENTER

ENTER

Time ModeIncoming Call

Distribution

Group No.001–128

[626] Overflow Time

[626](1–125)×10 s

001-128

Overflow TimeEND

ENTER ENTER

Incoming Call

Distribution

Group No.







[627] Destination When All Busy

[627]Max. 32 digits

Destination No.

END

ENTER

ENTER

Incoming Call

Distribution

Group No.1 Day/2 Lunch/

3 Break/4 Night

Time Mode

001–128

[628] Queuing Call Capacity

[628]0–100

Number in QueuingEND

ENTER ENTER

Incoming Call

Distribution

Group No.001–128

[629] Queuing Hurry-up Level

[629]None/1–30

Hurry-up LevelEND

ENTER ENTER

Incoming Call

Distribution

Group No.001–128

[630] Queuing Time Table

[630]1 Day/2 Lunch/

3 Break/4 Night

Table No.Time Mode

END

ENTER

ENTER

Incoming Call

Distribution

Group No.

001–128

01–64

[631] Sequences in Queuing Time Table

[631]01–16

* Number must be entered in the "N".

Location No.Table No.

END

None/Overflow/

Disconnect/"N" × 5 s/

Sequence "N"/OGM "N"

SELECT

ENTER

ENTER

01–64







[632] Maximum Number of Agents

[632]No Limitation/01–32

Number of AgentsEND

ENTER ENTER

Incoming Call

Distribution

Group No.

001–128

[640] Extension User Groups of a Paging Group

[640] Extn. User Group No.Paging Group No.

END

No/Yes

SELECT

ENTER

ENTER

01–32 001–032

[641] External Pagers of a Paging Group

[641] External Pager No.Paging Group No.

END

SELECT

ENTER

ENTER

No/Yes 1–601–32

[650] Extension User Groups of a Pickup Group

[650] Pickup Group No.

END

SELECT

ENTER

ENTER

No/Yes

Extn. User Group No.

01–64 001–032







[660] UM Group Floating Extension Number

[660]END

ENTER ENTER

UM Float Extn. No.

1–5 digits

[661] VM Group Floating Extension Number

[661]END

ENTER ENTER

Extn. No.

1–5 digits

VM (DPT) Group No.

[680] Idle Extension Hunting Type

[680] Hunting Group No.END

Circular/

Terminate

SELECT

ENTER ENTER01–64

[681] Idle Extension Hunting Group Member

[681]01–1601–64

Location No.Hunting Group No.

END

ENTER

ENTER

Extn. No.

1–5 digits

[690] PS Registration

[690] PS No.

KX-TD7690

END

ENTER ENTER

To the PS

operation

below

Extn. No.

Push power

button for 2

seconds.

Push F3

key for 2

seconds.

C.Tone

1–5 digits001–128







NoteFor details about PS registration, refer to the Quick Installation Guide for the relevant Cell Station (CS).

[691] PS Termination

[691] PS No.END

ENTER ENTER

001–128

[692] Personal Identification Number (PIN) for PS Registration

[692]4 digits

PIN for PS Registration END

ENTER ENTER1234

[699] CS Status Reference

[699]END

Slot No.Reference only

CS Status

ENTER

Port No.







2.1.10 Resource/Interface Programming[700] External Pager Floating Extension Number

[700]1–6

Pager No.END

(HOLD)ENTER ENTER

CANCEL

NEXT

To the Next Pager No.

To the Desired Pager No.


[711] Music on Hold

[711]ENDTone/BGM 1–8

Music Source No.

ENTER ENTER

[712] Music for Transfer

[712]END Hold Music/

Ring back

SELECT

ENTER ENTER

[720] Doorphone Call Destination

[720]

END

1 Day/2 Lunch/

3 Break/4 Night

Max. 32 digits

Slot No.1–2

Port No.Time Mode

Destination No.

ENTER

ENTER

[729] Doorphone Number Reference

[729]END

Slot No.1–2 Reference only

Doorphone No.

ENTER

Port No.


2.1.10 Resource/Interface Programming





[730] Outgoing Message (OGM) Floating Extension Number

[730]END

Message No.

ENTER ENTER

Extn. No.

01–64 1–5 digits

[731] Outgoing Message (OGM) Name

[731]END

Message No.Max. 20 characters

Name

ENTER ENTER01–64

[732] DISA Security Mode

[732]END None/

Trunk/All

SELECT

ENTER ENTER


2.1.10 Resource/Interface Programming





2.1.11 SMDR & Maintenance Programming[801] External Modem Control

[801]END

ENTER

Command No.1–5 Press Soft Key

Yes/No

[802] SMDR Page Length

[802]END

4–99 lines

Page length

ENTER ENTER

[803] SMDR Skip Perforation

[803]END0–95 lines

Skip Perforation

ENTER ENTER

[804] SMDR Outgoing Call Printing

[804]ENDNo print/Print

SELECT

ENTER ENTER

[805] SMDR Incoming Call Printing

[805]ENDNo print/Print

SELECT

ENTER ENTER

[810] Remote Programming

Disable/

Enable

SELECT[810]END

ENTER ENTER


2.1.11 SMDR & Maintenance Programming





[811] Modem Floating Extension Number

[811]END

ENTER ENTER


[812] ISDN Remote Floating Extension Number

[812]END

ENTER ENTER



2.1.11 SMDR & Maintenance Programming





2.1.12 Card Programming[900] Slot Card Type Reference

[900]Reference only

Slot No. Card NameEND

(HOLD)ENTER

[901] Slot Card Deletion

[901]END

ENTER

Slot No. Delete

ENTER

To the Next Slot No.

To the Desired Slot No.

CANCELNEXT

Confirming the

deleting operation.

[902] Slot Card Reset

[902]END

Slot No. Reset

ENTER ENTERConfirming the

resetting operation.

[914] Expansion Unit Deletion

[914]END

(HOLD)

Expansion Unit No.

Soft key2: Expansion unit-13: Expansion unit-24: Expansion unit-3

Yes/No.

ENTER


2.1.12 Card Programming





2.2 Revision History

2.2.1 PFMPR Software File Version 004.1xxxxChanged Contents

• 2.1.1 Programming Instructions• 2.1.2 Slot Number and Port Number• 2.1.7 Trunk Programming• Feature Programming References


2.2.1 PFMPR Software File Version 004.1xxxx





Feature Programming References






Absent Message• [008] Absent Message

Feature Guide References2.20.2 Absent Message

Account Code Entry• [508] Account Code Mode

Feature Guide References2.5.4.3 Account Code Entry

Automatic Route Selection (ARS)• [320] ARS Mode• [321] ARS Leading Number• [322] ARS Routing Plan Table Number• [325] ARS Exception Number• [330] ARS Routing Plan Time Table• [331–346] ARS Routing Plan Table (1–16)• [347] ARS Routing Plan Table (1–48)• [350] ARS Carrier Name• [351] ARS Trunk Group for Carrier Access• [352] ARS Removed Number of Digits for Carrier Access• [353] ARS Carrier Access Code

Feature Guide References2.8.1 Automatic Route Selection (ARS)

Call Charge Services• [010] Charge Margin• [011] Charge Tax• [012] Charge Rate per Unit• [130] Decimal Point Position for Currency• [131] Currency

Feature Guide References2.22.3 Call Charge Services

Call Forwarding (FWD)• [472] Extension-to-Trunk Call Duration• [473] Trunk-to-Trunk Call Duration• [504] Call Forwarding to Trunk• [605] Call Forwarding—No Answer Time

Feature Guide References2.3.2 Call Forwarding (FWD)

Call Hold• [200] Hold Recall Time







Feature Guide References2.13.1 Call Hold

Call Pickup• [650] Extension User Groups of a Pickup Group

Feature Guide References2.4.3 Call Pickup

Call Transfer• [201] Transfer Recall Time• [503] Call Transfer to Trunk• [712] Music for Transfer

Feature Guide References2.12.1 Call Transfer

Caller ID• [001] System Speed Dialling Number• [002] System Speed Dialling Name• [490] Caller ID Signal Type

Feature Guide References2.19.1 Caller ID

Calling Line Identification (CLI) Distribution• [001] System Speed Dialling Number• [002] System Speed Dialling Name

Feature Guide References2.1.1.5 Calling Line Identification (CLI) Distribution

Calling Party Control (CPC) Signal Detection• [413] LCOT CPC Signal Detection Time—Outgoing• [414] LCOT CPC Signal Detection Time—Incoming

Feature Guide References2.11.9 Calling Party Control (CPC) Signal Detection

Calling/Connected Line Identification Presentation (CLIP/COLP)• [003] Extension Number• [422] BRI Subscriber Number• [606] CLIP/COLP Number

Feature Guide References4.1.2.2 Calling/Connected Line Identification Presentation (CLIP/COLP)

Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected NameIdentification Presentation (CNIP/CONP)—by QSIG

• [003] Extension Number







• [004] Extension Name

Feature Guide References4.3.4.2 Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected NameIdentification Presentation (CNIP/CONP)—by QSIG

Class of Service (COS)• 2.1.8 COS Programming• [602] Class of Service

Feature Guide References3.2.1.11 Class of Service (COS)

Dial Type Selection• [410] LCOT Dialling Mode• [411] LCOT Pulse Rate• [412] LCOT DTMF Minimum Duration

Feature Guide References2.5.4.4 Dial Type Selection

Direct In Line (DIL)• [421] BRI DIL/DDI/MSN Selection• [450] DIL 1:1 Destination

Feature Guide References2.1.1.2 Direct In Line (DIL)

Direct Inward Dialling (DID)/Direct Dialling In (DDI)• [421] BRI DIL/DDI/MSN Selection• [451] DID Number• [452] DID Name• [453] DID Destination

Feature Guide References2.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)

Direct Inward System Access (DISA)• [209] DISA Delayed Answer Time• [210] DISA Trunk-to-Trunk Call Prolong Time• [211] DISA Intercept Time• [475] DISA Silence Detection• [476] DISA Continuous Signal Detection• [477] DISA Cyclic Signal Detection• [604] Extension Intercept Destination• [730] Outgoing Message (OGM) Floating Extension Number• [731] Outgoing Message (OGM) Name• [732] DISA Security Mode

Feature Guide References







2.16.1 Direct Inward System Access (DISA)

Display Information• [130] Decimal Point Position for Currency• [131] Currency

Feature Guide References2.21.4 Display Information

Do Not Disturb (DND)• [507] DND Override

Feature Guide References2.3.3 Do Not Disturb (DND)

Door Open• [207] Door Unlock Time• [512] Permission for Door Open Access

Feature Guide References2.18.2 Door Open

Doorphone Call• [720] Doorphone Call Destination• [729] Doorphone Number Reference

Feature Guide References2.18.1 Doorphone Call

Emergency Call• [304] Emergency Number

Feature Guide References2.5.4.2 Emergency Call

Executive Busy Override• [505] Executive Busy Override• [506] Executive Busy Override Deny

Feature Guide References2.10.2 Executive Busy Override

Extension Dial Lock• [510] TRS/Barring Level for Extension Dial Lock

Feature Guide References2.7.3 Extension Dial Lock

Extension Personal Identification Number (PIN)• [005] Extension Personal Identification Number (PIN)







Feature Guide References2.24.1 Extension Personal Identification Number (PIN)

Extension Port Configuration• [007] DSS Console Paired Telephone• [600] EXtra Device Port (XDP) Mode

Feature Guide References5.2.6 Extension Port Configuration

External Feature Access (EFA)• [417] LCOT Flash/Recall Time

Feature Guide References2.11.7 External Feature Access (EFA)

Flash/Recall/Terminate• [418] LCOT Disconnect Time

Feature Guide References2.11.6 Flash/Recall/Terminate

Flexible Numbering/Fixed Numbering• [100] Flexible Numbering

Feature Guide References5.5.7 Flexible Numbering/Fixed Numbering

Floating Extension• [623] Incoming Call Distribution Group Name• [660] UM Group Floating Extension Number• [661] VM Group Floating Extension Number• [700] External Pager Floating Extension Number• [730] Outgoing Message (OGM) Floating Extension Number• [731] Outgoing Message (OGM) Name• [811] Modem Floating Extension Number• [812] ISDN Remote Floating Extension Number

Feature Guide References5.5.8 Floating Extension

Group Call Distribution• [621] Incoming Call Distribution Group Delayed Ringing• [624] Incoming Call Distribution Group Distribution Method• [632] Maximum Number of Agents

Feature Guide References2.2.2.2 Group Call Distribution







Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)• [471] Host PBX Access Code

Feature Guide References2.5.4.8 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)

Hot Line• [204] Hot Line Waiting Time

Feature Guide References2.6.6 Hot Line

Idle Extension Hunting• [680] Idle Extension Hunting Type• [681] Idle Extension Hunting Group Member

Feature Guide References2.2.1 Idle Extension Hunting

Incoming Call Distribution Group Features• [620] Incoming Call Distribution Group Member• [621] Incoming Call Distribution Group Delayed Ringing• [622] Incoming Call Distribution Group Floating Extension Number• [623] Incoming Call Distribution Group Name• [624] Incoming Call Distribution Group Distribution Method• [625] Destination for Overflow Time Expiration• [626] Overflow Time• [627] Destination When All Busy• [628] Queuing Call Capacity• [629] Queuing Hurry-up Level• [630] Queuing Time Table• [631] Sequences in Queuing Time Table• [632] Maximum Number of Agents

Feature Guide References2.2.2 Incoming Call Distribution Group Features

Integrated Services Digital Network (ISDN)• [420] BRI Network Type• [424] BRI Layer 1 Active Mode• [425] BRI Layer 2 Active Mode• [426] BRI Configuration• [427] BRI TEI Mode

Feature Guide References4.1.2 Integrated Services Digital Network (ISDN) Service Features

Intercept Routing• [203] Intercept Time• [604] Extension Intercept Destination







• [625] Destination for Overflow Time Expiration

Feature Guide References2.1.1.6 Intercept Routing

Intercept Routing—No Destination• [006] Operator Assignment

Feature Guide References2.1.1.7 Intercept Routing—No Destination

Intercom Call• [003] Extension Number• [004] Extension Name

Feature Guide References2.5.3 Intercom Call

Internal Call Features• [720] Doorphone Call Destination

Feature Guide References2.1.2 Internal Call Features

Last Number Redial• [205] Automatic Redial Repeat Times• [206] Automatic Redial Interval

Feature Guide References2.6.3 Last Number Redial

Line Preference—Outgoing• [103] Idle Line Access (Local Access)• [500] Trunk Group Number

Feature Guide References2.5.5.2 Line Preference—Outgoing

Manager Features• [112] Manager Password• [511] Manager Assignment

Feature Guide References5.1.6 Manager Features

Multiple Subscriber Number (MSN) Ringing Service• [421] BRI DIL/DDI/MSN Selection• [426] BRI Configuration








2.1.1.4 Multiple Subscriber Number (MSN) Ringing Service

Music on Hold• [711] Music on Hold

Feature Guide References2.13.4 Music on Hold

Network Direct Station Selection (NDSS)• [511] Manager Assignment

Feature Guide References4.3.5.1 Network Direct Station Selection (NDSS)

Operator Features• [006] Operator Assignment

Feature Guide References5.1.5 Operator Features

Outgoing Message (OGM)• [631] Sequences in Queuing Time Table• [730] Outgoing Message (OGM) Floating Extension Number

Feature Guide References2.30.2 Outgoing Message (OGM)

Outside Destinations in Incoming Call Distribution Group• [620] Incoming Call Distribution Group Member• [621] Incoming Call Distribution Group Delayed Ringing• [622] Incoming Call Distribution Group Floating Extension Number• [624] Incoming Call Distribution Group Distribution Method• [629] Queuing Hurry-up Level

Feature Guide References2.2.2.3 Outside Destinations in Incoming Call Distribution Group

Overflow Feature• [625] Destination for Overflow Time Expiration• [626] Overflow Time• [627] Destination When All Busy• [628] Queuing Call Capacity• [632] Maximum Number of Agents

Feature Guide References2.2.2.7 Overflow Feature

Paging• [640] Extension User Groups of a Paging Group• [641] External Pagers of a Paging Group







Feature Guide References2.17.1 Paging

Parallelled Telephone• [600] EXtra Device Port (XDP) Mode

Feature Guide References2.11.10 Parallelled Telephone

Pause Insertion• [416] LCOT Pause Time

Feature Guide References2.5.4.7 Pause Insertion

Portable Station (PS) Connection• [690] PS Registration• [691] PS Termination• [692] Personal Identification Number (PIN) for PS Registration

Feature Guide References5.2.4.1 Portable Station (PS) Connection

PS Directory• [001] System Speed Dialling Number• [002] System Speed Dialling Name• [004] Extension Name

Feature Guide References5.2.4.3 PS Directory

PS Ring Group• [620] Incoming Call Distribution Group Member

Feature Guide References5.2.4.2 PS Ring Group

PS Roaming by Network ICD Group• [620] Incoming Call Distribution Group Member• [622] Incoming Call Distribution Group Floating Extension Number• [624] Incoming Call Distribution Group Distribution Method

Feature Guide References4.3.6.1 PS Roaming by Network ICD Group

PT Programming• 2.1 PT Programming• [516] Programming Mode Limitation







Feature Guide References5.5.3 PT Programming

Queuing Feature• [628] Queuing Call Capacity• [629] Queuing Hurry-up Level• [630] Queuing Time Table• [631] Sequences in Queuing Time Table• [632] Maximum Number of Agents

Feature Guide References2.2.2.4 Queuing Feature

Reverse Circuit• [415] LCOT Reverse Circuit

Feature Guide References2.5.4.5 Reverse Circuit

Software Upgrading• [190] Main Processing (MPR) Software Version Reference

Feature Guide References5.5.9 Software Upgrading

Special Carrier Access Code• [303] Special Carrier Access Code

Feature Guide References2.5.4.9 Special Carrier Access Code

Speed Dialling—Personal/System• [001] System Speed Dialling Number• [002] System Speed Dialling Name• [509] TRS/Barring Level for System Speed Dialling

Feature Guide References2.6.4 Speed Dialling—Personal/System

Station Message Detail Recording (SMDR)• [802] SMDR Page Length• [803] SMDR Skip Perforation• [804] SMDR Outgoing Call Printing• [805] SMDR Incoming Call Printing

Feature Guide References2.22.1.1 Station Message Detail Recording (SMDR)

Tenant Service• [001] System Speed Dialling Number







• [006] Operator Assignment• [320] ARS Mode• [711] Music on Hold

Feature Guide References5.1.3 Tenant Service

TIE Line Service• [500] Trunk Group Number

Feature Guide References4.3.1 TIE Line Service

Time Service• [101] Time Service Switching Mode• [102] Time Service Starting Time• [514] Time Service Manual Switching

Feature Guide References5.1.4 Time Service

Toll Restriction (TRS)/Call Barring (Barring)• [300] TRS/Barring Override by System Speed Dialling• [301] TRS/Barring Denied Code• [302] TRS/Barring Exception Code• [501] TRS/Barring Level• [509] TRS/Barring Level for System Speed Dialling• [602] Class of Service

Feature Guide References2.7.1 Toll Restriction (TRS)/Call Barring (Barring)

Trunk Access• [400] LCOT/BRI Trunk Connection• [401] LCOT/BRI Trunk Name• [409] LCOT/BRI Trunk Number Reference• [500] Trunk Group Number

Feature Guide References2.5.5.3 Trunk Access

Trunk Answer From Any Station (TAFAS)• [700] External Pager Floating Extension Number

Feature Guide References2.17.2 Trunk Answer From Any Station (TAFAS)

Trunk Busy Out• [511] Manager Assignment







Feature Guide References2.5.4.6 Trunk Busy Out

Trunk Call Limitation• [472] Extension-to-Trunk Call Duration• [473] Trunk-to-Trunk Call Duration• [502] Trunk Call Duration Limitation

Feature Guide References2.11.8 Trunk Call Limitation

Verification Code Entry• [120] Verification Code• [121] Verification Code Name• [122] Verification Code Personal Identification Number (PIN)• [123] Verification Code COS Number

Feature Guide References2.7.6 Verification Code Entry

Virtual PS• [690] PS Registration

Feature Guide References5.2.4.6 Virtual PS

Voice Mail (VM) Group• [601] Terminal Device Assignment• [660] UM Group Floating Extension Number• [661] VM Group Floating Extension Number

Feature Guide References2.28.1 Voice Mail (VM) Group

Voice Mail DPT (Digital) Integration• [201] Transfer Recall Time

Feature Guide References2.28.3 Voice Mail DPT (Digital) Integration

Walking COS• [005] Extension Personal Identification Number (PIN)

Feature Guide References2.7.5 Walking COS

Walking Extension• [007] DSS Console Paired Telephone








2.24.3 Walking Extension Features

Wireless XDP Parallel Mode• [515] Wireless XDP Parallel Mode for Paired Telephone

Feature Guide References5.2.4.5 Wireless XDP Parallel Mode








Notes





PNQX6306WA CC0114AH3104

1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan

Copyright:

This material is copyrighted by Panasonic System Networks Co., Ltd., and may be reproduced for internal use

only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic System

Networks Co., Ltd.

Panasonic System Networks Co., Ltd. 2014

Web Site: http://www.panasonic.net/



http://www.panasonic.net/



Hybrid IP-PBX · 2016. 6. 6. · Model No. KX-NS500 PT Programming Manual ... There are two...

Documents

Transcript of Hybrid IP-PBX · 2016. 6. 6. · Model No. KX-NS500 PT Programming Manual ... There are two...