HVAC PRODUCT APPLICATIONS...• UL classified and meets NFPA-90A and 90B 25/50 requirements Childers...
Transcript of HVAC PRODUCT APPLICATIONS...• UL classified and meets NFPA-90A and 90B 25/50 requirements Childers...
Water-Based:Childers™ Chil-Quik™ CP-127
Solvent-Based:Childers™ Chil-Grip™ CP-124-6
Foster® Fos-Stick™ 85-45™
Duct Liner and Duct Wrap Adhesives
Duct Sealants
Smooth:Childers™ Chil-Flex™ CP-146
Childers™ CP-147
HVAC PRODUCT APPLICATIONS
HVAC PRODUCTS
Form# CHVAC N0915–16
H.B. Fuller Construction Products Inc.1105 South Frontenac Street
Aurora, IL 60504-6451Phone: (800) 832-9002 fosterproducts.com
Fibrated:Childers™ Chil-Duct™ CP-148Childers™ Chil-Tuff™ CP-181-1
For more information visit fosterproducts.com, call 1-800-832-9002 or contact your Childers™ sales representative.
Childers™ Chil-Duct™ CP-148 (Gray)
• Fibrated formula provides a tough, flexible seal preventing air leakage
• Excellent weather resistance for indoor and outdoor applications
• Low water vapor permeance and good water resistance for high-humidity applications
• UL-181B-M listed and classified
Childers™ Chil-Flex™ CP-146 (Gray)
• Non-fibrated duct sealant designed for indoor and outdoor use
• Water-based, low VOC adhesive. Meets LEED IEQ 4.1 requirements
• Flexible, durable seals on all pressure class ducts and flexible air ducts to rigid connectors
• Smooth consistency allows easy application by brush, glove, trowel, power extrusion or caulking gun
• UL 181B-M listed and classified
Childers™ Chil-Tuff™ CP-181-1 (Gray)
• Water-based, low VOC adhesive. Meets LEED IEQ 4.1 requirements
• Economical, fibrated, multi-purpose sealant for use on all pressure classes up to 10" w.g.
• Can be used to seal ASJ, FRK and FSK jackets and board facings at joints and laps
• UL 181B-M listed and classified
Childers™ CP-147 (Gray)
• Non-fibrated duct sealant designed for indoor and outdoor use
• Smooth consistency for easy application by brush
• Forms a flexible, yet durable seal against air leakage on all pressure class ducts
• UL 181B-M listed and classified
Childers™ Chil-Quik™ CP-127 (Dries Clear) • Designed for adhering fiber glass and mineral wool duct liner insulation to galvanized steel
• High volume spray and coil line operations
• Runs smoothly on spray head, roll coater or drip line equipment
• UL classified and meets NFPA-90A and 90B 25/50 requirements
Childers™ Chil-Grip™ CP-124-6 (Red)
• Use for adhering duct liner and duct wrap to the inside or outside of HVAC duct work
• Solvent-based, fast tacking and fast drying adhesive
• UL classified and meets NFPA-90A and 90B 25/50 requirements
Childers™ Chil-Spred™ CP-135-2 (Black)
• Use as a “duct butter” for sealing exposed fibers to prevent air erosion and release
• Use as a lagging adhesive and coating with cloth to seal seams and provide a protective finish over insulation
Fibrated
Smooth
Adhesives
Edge Coating and Lagging Adhesive
Water-BasedLow VOC
Water-BasedLow VOC
Water-BasedLow VOC
Water-BasedLow VOC
Water-BasedLow VOC
Water-BasedLow VOC
Foster® Fos-Stick™ 85-45™ (Dries Clear) • Adheres a wide variety of insulation materials to metal or other construction surfaces where immediate adhesion and high initial adhesive strength are required
• Rapid tacking, web spray aerosol adhesive
• Meets California Air Resources Board Standard and Green Seal Standards
Duct Sealants