HV Cable Jointing Nexans Euromold Elastimold HV ... Kit contents The complete 750LR or 775LR tee...
Transcript of HV Cable Jointing Nexans Euromold Elastimold HV ... Kit contents The complete 750LR or 775LR tee...
4
Up to 36 kV800 A & 1250 A
Separableconnector
type
VoltageUm(kV)
CurrentIr
(A)
Conductor sizes (mm2)
min. max.
750LR775LR
3636
8001250
3535
630630
750LR & 775LRINTERFACE E - 5/8"
TEE CONNECTOR
ApplicationSeparable tee connector (bolted5/8" type) designed to connectpolymeric insulated cable toequipment (transformers, switchgear, motors...).Also connects cable to cable,using the appropriate matingpart.
Technical characteristics• A thick conductive EPDM
jacket provides a total safe totouch screen.
• Each separable connector istested for AC withstand andpartial discharge prior toleaving the factory.
6/10 (12) kV6.35/11 (12) kV8.7/15 (17.5) kV
12/20 (24) kV12.7/22 (24) kV
18/30 (36) kV
Specifications andstandardsThe separable connectors750LR and 775LR meet therequirements of CENELEC HD629.1.
DesignSeparable connectorcomprising:
1. Conductive EPDM insert.2. Conductive EPDM jacket.3. Insulating EPDM layer
moulded between the insertand the jacket.
4. Type E interface asdescribed in ANSI/IEEE std.386.
5. Threaded stud 5/8".6. Conductor connector.7. Cable reducer.8. Dead end plug (with VD
point).9. Conductive rubber cap.
10. Cable adaptor.
295 mm260 mm
355 mm
9
3
1
4
6
10
8
5
7
2
5
Kit contentsThe complete 750LR or 775LRtee connector kit comprises thefollowing components:
The kit also comprises lubricant, wipers,installation instructions and crimp chart.
For use withother cable types.
Please contact ourrepresentative.
For outdoorapplications.
Order: +MWS.
Components can beordered individually.
For use withcopper tape
screened cables.Order: Kit MT.
For use with fabric tape(graphite) screened cables.
Order additionalsemi-conductive tape
(type TSC).
+ + + + = 750LR-W-X1+11TLor
775LR-W-X2+11TLconnector kit
Ordering instructionsSelect the part number whichgives the best centring to thecable core insulation diameter.
Example:The copper wire screened cableis 36 kV, 300 mm2 strandedaluminium with a diameter overcore insulation of 38.8 mm.Order a 750LR-M-300KM-10-2+11TL tee connector kit for+11TL tee connector kit fortee connector kit for800 A application.
Table W
Table X
Ordering partnumber - 800 A
Ordering partnumber - 1250 A
Dia. over core insulation (mm)min. max.
750LR-G-X1+11TL750LR-H-X1+11TL750LR-J-X1+11TL750LR-K-X1+11TL750LR-L-X1+11TL750LR-M-X1+11TL750LR-N-X1+11TL750LR-P-X1+11TL750LR-Q-X1+11TL
775LR-G-X2+11TL775LR-H-X2+11TL775LR-J-X2+11TL775LR-K-X2+11TL775LR-L-X2+11TL775LR-M-X2+11TL775LR-N-X2+11TL775LR-P-X2+11TL775LR-Q-X2+11TL
19.321.624.927.730.034.838.543.848.3
24.126.730.033.337.241.145.249.153.9
Conductorsizes
(mm²)
Table X1: 800 A Table X2: 1250 A
Aluminium conductor Copper conductor Aluminium conductor Copper conductor
DINhexagonal
Deepindent
DINhexagonal
DINhexagonal
Deepindent
DINhexagonal
35507095120150185240300400500630
35(K)M-10-250(K)M-10-270(K)M-10-295(K)M-10-2120(K)M-10-2150(K)M-10-2185(K)M-10-2240(K)M-10-2300(K)M-10-2400(K)M-10-2500(K)M-10-2630(K)M-10-2
35KM-10-150(K)M-10-170(K)M-10-195(K)M-10-1120(K)M-10-1150(K)M-10-1185(K)M-10-1240(K)M-10-1300(K)M-10-1400(K)M-10-1500(K)M-10-1630(K)M-10-1
35(K)M-1450(K)M-1470(K)M-1495(K)M-14120(K)M-14150(K)M-14185(K)M-14240(K)M-14300(K)M-14400(K)M-14500(K)M-14630(K)M-14
35(K)M-12-250(K)M-12-270(K)M-12-295(K)M-12-2120(K)M-12-2150(K)M-12-2185(K)M-12-2240(K)M-12-2300(K)M-12-2400(K)M-12-2500(K)M-12-2630(K)M-12-2
35KM-12-150(K)M-12-170(K)M-12-195(K)M-12-1120(K)M-12-1150(K)M-12-1185(K)M-12-1240(K)M-12-1300(K)M-12-1400(K)M-12-1500(K)M-12-1630(K)M-12-1
35(K)M-11-250(K)M-11-270(K)M-11-295(K)M-11-2
120(K)M-11-2150(K)M-11-2185(K)M-11-2240(K)M-11-2300(K)M-11-2400(K)M-11-2500(K)M-11-2630(K)M-11-2
Connector housing750BLR
Cableadaptor
11TL
ConductorcontactTBC-X1
or TBC-X2
Dead end plug+ rubber cap
750DPor 775DP
Cable reducer755CA-W
For use with copper wirescreened cables.
No earthing device isnecessary.