HUNTER AUTOMOTIVE SERVICE EQUIPMENT V.A.G. PRODUCT ... Min Req Equip Misc Info.pdf · Some VAG...
Transcript of HUNTER AUTOMOTIVE SERVICE EQUIPMENT V.A.G. PRODUCT ... Min Req Equip Misc Info.pdf · Some VAG...
Form 700VAG, 04-11Supersedes 700VAG, 09-10
HUNTER AUTOMOTIVE SERVICE EQUIPMENT
V.A.G. PRODUCT ORDERING GUIDE
REFER TO QB4 FOR LATEST PRICING INFORMATION
F.O.B. PLANT POINT OF SHIPMENT-BRIDGETON, MO. / DURANT, MS. / RAYMOND, MS / UNION, MS
PRICE REFERENCE NOTES:
A - Price includes installationB - Price includes installation with major equipment groups
ContentsNew Camera Sensors, Alignment Consoles (VAS6292) and Lifts......................................1
Road Force Measurement System (VAS6230) ...................................................................18
Other Balancers, Brake Lathes and Tire Changer Groups ...............................................18
Upgrading older systems to meet VAG 1944B and VAS6292 Requirements ..................20
Electronic Turnplate Guide..................................................................................................32
Touareg Wheel Adaptors and Spade Sleeve Guide ..........................................................32
Training .................................................................................................................................32
Wheel Alignment Systems
Page 1 of 32
New Camera Sensors, Alignment Consoles (VAS6292) and Lifts
All VAS6292 versions of the HawkEye HS401 Series Sensors ship with High Definition Targets.
HS401 Camera Sensor Type
HS401FMVAGConsole HS401PSVAG HS401WMVAG HS401LCVAG HS401MLVAG HS401CMVAG
WA243VAS VAS6292P-FM VAS6292P-PS VAS6292P-WM VAS6292PLC VAS6292PML VAS6292PCM
WA142VAS VAS6292-FM VAS6292-PS VAS6292-WM VAS6292LC VAS6292ML VAS6292CM
WA245VAS VAS6292PLCD-FM VAS6292PLCD-PS
VAS6292PLCD-WM VAS6292PLCDLC VAS6292PLCDML VAS6292PLCDCM
WA132VAS VAS6292BFM VAS6292BPS VAS6292BWM VAS6292BLC VAS6292BML N/A
LC ML CM
WM(Straight Installation)
WM(Angled Installation)
FM PSSensors shown with optional
alignment rack.P/N HS401 Family Sensors
LCHS401LCVAG Sensors - An electrically operated vertical camera lift provides a full range of travel for additional lift height or to work with the vehicle on the floor. Includes 4 Cameras, High Definition Targets, Wheel Adaptors, and turnplate bridges.
MLHS401MLVAG Sensors - A manually operated vertical camera lift provides a full range of travel for additional lift height or to work with the vehicle on the floor. Includes 4 Cameras, High Definition Targets, Wheel Adaptors, and turnplate bridges.
CMHS401CMVAG Sensors – Portable cabinet mount sensors mount to a WA140 or WA240 console and may be rolled from bay to bay. A manually operated vertical camera lift provides a full range of travel for additional lift height or to work with the vehicle on the floor. Includes 4 Cameras, High Definition Targets, Wheel Adaptors, turnplate bridges, and one set of anchor plates
WMHS401WMVAG Sensors - Suitable for most installations. Wall mounted for straight or angled (herringbone) approach bays. Patented fixed camera configuration. NO MOVING PARTS, yet still allows the technician to lift the vehicle to a comfortable working height. Includes 4 Cameras, High Definition Targets, Wheel Adaptors, and turnplate bridges.
FM
HS401FMVAG Sensors - Floor mounted overhead camera configuration suitable for drive through. Patented fixed camera configuration. NO MOVING PARTS, yet still allows the technician to lift the vehicle to a comfortable working height. Includes 4 Cameras, High Definition Targets, Wheel Adaptors, and turnplate bridges.
PSHS401PSVAG Sensors - Overhead camera mounting configuration suitable for use in a PN pit. Patented fixed camera configuration. NO MOVING PARTS. Includes 4 Cameras, High Definition Targets, Wheel Adaptors, and turnplate bridges.
Wheel Alignment Systems
Page 2 of 32
VAG LDR/ADR/ACC TOOL CLEARANCE NOTE:
Some VAG vehicles have radar-based cruise control options. The aiming of these systems requires a special tool to be placed in front of the vehicle while alignment sensors are mounted to the tool and the rear axle of the vehicle.
The VAG LDR/ADR/ACC tool requires a specific amount of space in front of the vehicle to operate. In tight bays, it is ok to roll the vehicle back to achieve this space.
Refer to the following diagrams for minimum rack to wall and LDR/ADR/ACC tool clearances.
Note: HS401FMVAG and HS401WM sensor do not have supporting structure along the center of the bay, therefore they will not interfere with radar aiming. The HS401CMVAG can be rolled out of the way with the cabinet.
Minimum rack to wall clearance without rolling back:
Minimum rack to wall clearance with rolling back:
Refer to “Hawkeye Series Sensor Placement to Accommodate the Aiming of Radar-Based Cruise Control Systems (LDW, ADR AND ACC)”, Form 5570-T, for more information.
Radar Alignment System Kit 20-1835-1 is standard with all of the VAS6292 equipment packages.The Radar Alignment System Kit is used with VAS6430 calibration bar and fixture for LDW/ADR/ACC adjustment.
If upgrading an existing system to use DSP600 or HS401 Series Sensors, the Radar Alignment System Kit 20-1835-1 is a V.A.G. mandatory tool for LDW/ADR/ACC adjustment and must be ordered.
Wheel Alignment Systems
Page 3 of 32
Recommended VAS6292 Equipment Package(Standard package for new installations)
P/N DescriptionVAS6292PXX A
(WA243VAS)WinAlign WA200 Series with premium large cabinet and 20" Widescreen LCD
See chart on page 1 for “XX” values.
Alignment consoles include: - Computer with;
- Current WinAlign® Software- Electronic Software Authorization Key for VAG software- Two Years of VID Updates- 2 years subscription to WebSpecs�- Intel Core 2 Duo Processor – 2.8 GHz (or greater) - 3 GB RAM- 80.0 GB SATA (or greater)- Single DVD/CD-RW Drive- USB 2.0- Network Module- Wireless Network Module- Mouse- Windows Vista Business- Digital-Photo Option- Digital-Video Option- HP Color Printer- Keyboard- iShop� and ASANet� compatible
- Handheld wireless remote control- Live Ride Height Targets (20-2050-1)- Steering Wheel Holder- Brake Pedal Depressor- Select one of the following camera sensor types:
WM, FM, PS ML, CM- High Definition Targets- Radar Alignment System Kit for LDW/ADR/ACC adjustment (20-1835-1)- Stainless steel turnplates - low friction (20-1918-1)- Kit to modify VAG alignment tool to fit on Hunter alignment racks (20-1194-1)
See “VAG Mandatory Tools” section on page 12 for additional requirements.Radar Alignment System Kit 20-1835-1 is used with VAS6430 calibration bar and fixture for LDW/ADR/ACC adjustment. See page 12 for details.
VAS6292PXX(WA243VAS)
Shown with Radar Alignment System Kit for LDW/ADR/ACC adjustment (20-1835-1)
WMWM
(Angled Installation)FM
PSShown with optional
alignment rack.
ML CM
Wheel Alignment Systems
Page 4 of 32
Recommended VAS6292 Equipment Package - Electric Lift Column(Standard package for new installations)
P/N DescriptionVAS6292PLC A
(WA243VAS) WinAlign WA200 Series with premium large cabinet and 20" Widescreen LCD and Electrically Operated Vertical Camera Lift.Alignment consoles include: - Computer with;
- Current WinAlign® Software- Electronic Software Authorization Key for VAG software- Two Years of VID Updates- 2 years subscription to WebSpecs�- Intel Core 2 Duo Processor – 2.8 GHz (or greater) - 3 GB RAM- 80.0 GB SATA (or greater)- Single DVD/CD-RW Drive- USB 2.0- Network Module- Wireless Network Module- Mouse- Windows Vista Business- Digital-Photo Option- Digital-Video Option- HP Color Printer- Keyboard- iShop� and ASANet� compatible
- Handheld wireless remote control- Live Ride Height Targets (20-2050-1)- Steering Wheel Holder- Brake Pedal Depressor- Camera sensor type: LC- High Definition Targets- Radar Alignment System Kit for LDW/ADR/ACC adjustment (20-1835-1)- Stainless steel turnplates - low friction (20-1918-1)- Kit to modify VAG alignment tool to fit on Hunter alignment racks (20-1194-1)
See “VAG Mandatory Tools” section on page 12 for additional requirements.Radar Alignment System Kit 20-1835-1 is used with VAS6430 calibration bar and fixture for LDW/ADR/ACC adjustment. See page 12 for details.
VAS6292PLC(WA243VAS)
Shown with Radar Alignment System Kit for LDW/ADR/ACC adjustment (20-1835-1)
LC(Shown with optional Plus Cordless Remote Indicator)
Wheel Alignment Systems
Page 5 of 32
Plus VAS6292 Equipment Package(Standard package for new installations)
P/N DescriptionVAS6292PLCDXXA
(WA245VAS)WinAlign WA200 Series with premium large cabinet and 32" Widescreen LCD
See chart on page 1 for “XX” values.
Alignment consoles include: - Computer with;
- Current WinAlign® Software- Electronic Software Authorization Key for VAG software- Two Years of VID Updates- 2 years subscription to WebSpecs�- Intel Core 2 Duo Processor – 2.8 GHz (or greater) - 3 GB RAM- 80.0 GB SATA (or greater)- Single DVD/CD-RW Drive- USB 2.0- Network Module- Wireless Network Module- Mouse- Windows Vista Business- Digital-Photo Option- Digital-Video Option- HP Color Printer- Keyboard- iShop� and ASANet� compatible
- Handheld wireless remote control- Live Ride Height Targets (20-2050-1)- Steering Wheel Holder- Brake Pedal Depressor- Select one of the following camera sensor types:
WM, FM, PS, ML, CM- High Definition Targets- Radar Alignment System Kit for LDW/ADR/ACC adjustment (20-1835-1)- Stainless steel turnplates - low friction (20-1918-1)- Kit to modify VAG alignment tool to fit on Hunter alignment racks (20-1194-1)
See “VAG Mandatory Tools” section on page 12 for additional requirements.Radar Alignment System Kit 20-1835-1 is used with VAS6430 calibration bar and fixture for LDW/ADR/ACC adjustment. See page 12 for details.
VAS6292PLCDXX(WA245VAS)
Shown with Radar Alignment System Kit for LDW/ADR/ACC adjustment (20-1835-1)
WMWM
(Angled Installation)FM
PSShown with optional
alignment rack.
ML CM
Wheel Alignment Systems
Page 6 of 32
Plus VAS6292 Equipment Package - Electric Lift Column(Standard package for new installations)
P/N DescriptionVAS6292PLCDLCA
(WA245VAS)WinAlign WA200 Series with premium large cabinet and 32" Widescreen LCD and Electrically Operated Vertical Camera Lift.Alignment consoles include: - Computer with;
- Current WinAlign® Software- Electronic Software Authorization Key for VAG software- Two Years of VID Updates- 2 years subscription to WebSpecs�- Intel Core 2 Duo Processor – 2.8 GHz (or greater) - 3 GB RAM- 80.0 GB SATA (or greater)- Single DVD/CD-RW Drive- USB 2.0- Network Module- Wireless Network Module- Mouse- Windows Vista Business- Digital-Photo Option- Digital-Video Option- HP Color Printer- Keyboard- iShop� and ASANet� compatible
- Handheld wireless remote control- Live Ride Height Targets (20-2050-1)- Steering Wheel Holder- Brake Pedal Depressor- Camera sensor type: LC- High Definition Targets- Radar Alignment System Kit for LDW/ADR/ACC adjustment (20-1835-1)- Stainless steel turnplates - low friction (20-1918-1)- Kit to modify VAG alignment tool to fit on Hunter alignment racks (20-1194-1)
See “VAG Mandatory Tools” section on page 12 for additional requirements.Radar Alignment System Kit 20-1835-1 is used with VAS6430 calibration bar and fixture for LDW/ADR/ACC adjustment. See page 12 for details.
VAS6292PLCDLC(WA245VAS)
Shown with Radar Alignment System Kit for LDW/ADR/ACC adjustment (20-1835-1)
LC(Shown with optional Plus Cordless Remote Indicator)
Wheel Alignment Systems
Page 7 of 32
Basic Compliance VAS6292 Equipment Package(Standard package for new installations)
P/N DescriptionVAS6292XX A
(WA142VAS)WinAlign WA100 Series with large cabinet and 19" LCD
See chart on page 1 for “XX” values.
Alignment consoles include: - Computer with;
- Current WinAlign® Software- Electronic Software Authorization Key for VAG software- Two Years of VID Updates- Intel Pentium Dual-Core Processor - 2.4 GHz (or greater) - 2 GB RAM- 80.0 GB SATA (or greater)- Single DVD/CD-RW Drive- USB 2.0- Network Module- Mouse- Windows Vista Basic- HP Color Printer- Keyboard- iShop� and ASANet� compatible
- Handheld wireless remote control- Live Ride Height Targets (20-2050-1)- Steering Wheel Holder- Brake Pedal Depressor- Select one of the following camera sensor types:
WM, FM, PS, ML, CM- High Definition Targets- Radar Alignment System Kit for LDW/ADR/ACC adjustment (20-1835-1)- Stainless steel turnplates - low friction (20-1918-1)- Kit to modify VAG alignment tool to fit on Hunter alignment racks (20-1194-1)
See “VAG Mandatory Tools” section on page 12 for additional requirements.Radar Alignment System Kit 20-1835-1 is used with VAS6430 calibration bar and fixture for LDW/ADR/ACC adjustment. See page 12 for details.
VAS6292XX(WA142VAS)
Shown with Radar Alignment System Kit for LDW/ADR/ACC adjustment (20-1835-1)
WMWM
(Angled Installation)FM
PSShown with optional
alignment rack.
ML CM
Wheel Alignment Systems
Page 8 of 32
Basic Compliance VAS6292 Equipment Package - Electric Lift Column(Standard package for new installations)
P/N DescriptionVAS6292LC A
(WA142VAS)WinAlign WA100 Series with large cabinet and 19" LCD and Electrically Operated Vertical Camera Lift.Alignment consoles include: - Computer with;
- Current WinAlign® Software- Electronic Software Authorization Key for VAG software- Two Years of VID Updates- Intel Pentium Dual-Core Processor - 2.4 GHz (or greater) - 2 GB RAM- 80.0 GB SATA (or greater)- Single DVD/CD-RW Drive- USB 2.0- Network Module- Mouse- Windows Vista Basic- HP Color Printer- Keyboard- iShop� and ASANet� compatible
- Handheld wireless remote control- Live Ride Height Targets (20-2050-1)- Steering Wheel Holder- Brake Pedal Depressor- Camera sensor type: LC- High Definition Targets- Radar Alignment System Kit for LDW/ADR/ACC adjustment (20-1835-1)- Stainless steel turnplates - low friction (20-1918-1)- Kit to modify VAG alignment tool to fit on Hunter alignment racks (20-1194-1)
See “VAG Mandatory Tools” section on page 12 for additional requirements.Radar Alignment System Kit 20-1835-1 is used with VAS6430 calibration bar and fixture for LDW/ADR/ACC adjustment. See page 12 for details.
VAS6292LC(WA142VAS)
Shown with Radar Alignment System Kit for LDW/ADR/ACC adjustment (20-1835-1)
LC(Shown with optional Plus Cordless Remote Indicator)
Wheel Alignment Systems
Page 9 of 32
Minimum Compliance VAS6292 Equipment Package(Standard package for new installations)
P/N DescriptionVAS6292BXX-A
(WA132VAS) WinAlign WA100 Series with compact cabinet and 19" LCD
See chart on page 1 for “XX” values.
Alignment consoles include: - Computer with;
- Current WinAlign® Software- Electronic Software Authorization Key for VAG software- Two Years of VID Updates- Intel Pentium Dual-Core Processor - 2.4 GHz (or greater) - 2 GB RAM- 80.0 GB SATA (or greater)- Single DVD/CD-RW Drive- USB 2.0- Network Module- Mouse- Windows Vista Basic- HP Color Printer- Keyboard- iShop� and ASANet� compatible
- Handheld wireless remote control- Live Ride Height Targets (20-2050-1)- Steering Wheel Holder- Brake Pedal Depressor- Select one of the following camera sensor types:
WM, FM, PS, ML (CM not available for compact cabinet)- High Definition Targets- Radar Alignment System Kit for LDW/ADR/ACC adjustment (20-1835-1)
See “VAG Mandatory Tools” section on page 12 for additional requirements.Radar Alignment System Kit 20-1835-1 is used with VAS6430 calibration bar and fixture for LDW/ADR/ACC adjustment. See page 12 for details.
Note: This system does NOT include turnplates (Stainless steel - low friction 20-1918-1) and does not include kit to modify VAG alignment tool to fit on Hunter alignment racks (20-1194-1)
VAS6292BXX(WA132VAS)
Shown with Radar Alignment System Kit for LDW/ADR/ACC adjustment (20-1835-1)
WM WM(Angled Installation)
FM
PSShown with optional alignment rack. ML
Wheel Alignment Systems
Page 10 of 32
Minimum Compliance VAS6292 Equipment Package - Electric Lift Column(Standard package for new installations)
P/N DescriptionVAS6292BLC-A
(WA132VAS) WinAlign WA100 Series with compact cabinet and 19" LCD and Electrically Operated Vertical Camera Lift.Alignment consoles include: - Computer with;
- Current WinAlign® Software- Electronic Software Authorization Key for VAG software- Two Years of VID Updates- Intel Pentium Dual-Core Processor - 2.4 GHz (or greater) - 2 GB RAM- 80.0 GB SATA (or greater)- Single DVD/CD-RW Drive- USB 2.0- Network Module- Mouse- Windows Vista Basic- HP Color Printer- Keyboard- iShop� and ASANet� compatible
- Handheld wireless remote control- Live Ride Height Targets (20-2050-1)- Steering Wheel Holder- Brake Pedal Depressor- Camera sensor type: LC- High Definition Targets- Radar Alignment System Kit for LDW/ADR/ACC adjustment (20-1835-1)
See “VAG Mandatory Tools” section on page 12 for additional requirements.Radar Alignment System Kit 20-1835-1 is used with VAS6430 calibration bar and fixture for LDW/ADR/ACC adjustment. See page 12 for details.
Note: This system does NOT include turnplates (Stainless steel - low friction 20-1918-1) and does not include kit to modify VAG alignment tool to fit on Hunter alignment racks (20-1194-1)
VAS6292BLC(WA132VAS)
Shown with Radar Alignment System Kit for LDW/ADR/ACC adjustment (20-1835-1)
LC(Shown with optional Plus Cordless Remote Indicator)
Wheel Alignment Systems
Page 11 of 32
Recommended Aligner OptionsP/N Description
30-419-1 Icon Remote Indicator - New style remote indicator for WinAlign WA100 and WA200, Series 111, 211, 311, 411, 511, 611, 811 or PA100 Aligners.
30-421-1Icon Cordless Remote Indicator - New style cordless remote indicator for WinAlign WA100 and WA200, Series 811, 611 with USB support and PA100 Aligners. Requires XF2 Pod Kit, 20-2072-1. XF2 Pod shipped standard with DSP500 Cordless Sensors after 6-27-06.
30-418-1
Plus Cordless Remote Indicator - New style cordless remote indicator for WinAlign WA100 and WA200 and Series 811 Aligners. Records tire pressure, tread depth, ride height and measures tire temperature and frame angle. Includes Tire Temperature Probe. Requires XF2 Pod Kit, 20-2072-1 and WinAlign® 9.0. XF2 Pod shipped standard with DSP500 Cordless Sensors after 6-27-06.
20-2072-1
XF2 Pod Kit - XF communication for use with Plus Cordless Remote Indicator, 30-418-1-1 and Icon Cordless Remote Indicator, 30-421-1. This XF Pod is not compatible with DSP500 Cordless Sensors built prior to 6-27-06. XF2 Pod shipped standard with DSP500 Cordless Sensors after 6-27-06.
20-2112-1 Live Ride Height Adhesive Strips Kit - For use with Live Ride Height Targets (100 Adhesive Strips)
20-1885-1
Ride Height Handheld Wireless Remote Control. This kit contains only the Ride Height Handheld Wireless Remote Control. This kit requires USB assembly 232-185-1, which shipped standard with VAS6292 aligners after June 15, 2004. If USB board is needed order Ride Height Handheld Wireless Remote Control Upgrade Kit 20-1928-1.
20-1792-1 Extensions for self-centering adaptor. Compatible only with DSP508, DSP600 or HS401 self-centering adaptors 175-321-1 or 175-325-1. (set of sixteen, covers 4 wheel adaptors)
20-1789-1External tire clamp adaptor (Required for Audi Dealers). Compatible only with DSP508, DSP600 or HS401 self-centering adaptors 175-321-1 or 175-325-1. (set of four)
20-1860-1 Touareg Rim Stud Covers Kit. Compatible only with External tire clamp adaptor 20-1789-1.20-1872-1 VAG Rollback plates - used where clearance is limited between rack and wall.20-1970-1 B Digital-Photo Kit, Inspection & Adjustment Photos20-1971-1 B Combination Digital-Photo and Video Kit (includes 20-1970-1)
20-2211-1 B Memory Upgrade Kit (1 GB) provides 1 GB to WinAlign WA100, WA200 and 811-B Aligners. Contains one 1 GB memory module.
Recommended Aligner Options (VAG 1944B)P/N Description
20-1469-1 Burndy Y-Adaptor Kit for use with non-HFSS or XF sensors & Elect turnplates.
20-1097-1Extensions for self-centering adaptor. Compatible only with DSP308/DSP208/DSP258 self-centering adaptors, 175-200-1, 175-285-1, 175-304-1, and 175-305-1. (set of four, covers 4 wheel adaptors)
20-1558-1External tire clamp adaptor (Required for Audi Dealers). Compatible only with DSP308/DSP208/DSP258 self-centering adaptors, 175-200-1, 175-285-1, 175-304-1, and 175-305-1. (set of four)
20-1559-1 Upgrades an existing Tire Clamp Adaptor Kit 20-1108-1 to 20-1558-1. (set of four)
Wheel Alignment Systems
Page 12 of 32
V.A.G. Mandatory ToolsP/N Description
20-1789-1External tire clamp adaptor (Required for Audi Dealers). Compatible only with DSP508,DSP600 or HS401 self-centering adaptors175-321-1 or 175-325-1. (set of four)
V.A.G. Alignment Tool # 1925
Tool used to adjust the Front Axle Toe Curve when using Hunter Engineering Company Racks. This tool must have been modified per Hunter kit 20-1194-1.This tool must be ordered from VWoA.
VAS6430
LDW/ADR/ACC Calibration bar and fixture is used to perform Adaptive Cruise Control (ACC) and or Lane Departure Warning (LDW) calibration on Audi vehicles equipped with these systems. It can also be used to perform Automatic Distance Regulation (ADR) system adjustments on VW models.This tool must be ordered from VWoA.
20-1835-1 VAS6430 (LDW/ADR/ACC)Radar Alignment System Kit 20-1835-1 is standard with all of the VAS6292 equipment packages.The Radar Alignment System Kit is used with VAS6430 calibration bar and fixture for LDW/ADR/ACC adjustment.
V.A.G. Mandatory Tools (VAG 1944B)P/N Description
20-1558-1External tire clamp adaptor (Required for Audi Dealers). Compatible only with DSP308/DSP208/DSP258 self-centering adaptors, 175-200-1, 175-285-1, 175-304-1, and 175-305-1. (set of four)
Wheel Alignment Systems
Page 13 of 32
P/N Alignment Accessories
20-2336-1Pair of PowerSlide Low Friction Turnplates. For use with any vintage of VAG approved RX lift with PowerSlide or Inflation Station.
PowerSlide Low Friction Turnplates
20-1918-1 Pair of Stainless steel turnplates - low friction
Stainless Steel Turnplate
20-1792-1
Increases maximum wheel size that the self-centering adaptor will fit by 3 ½ inches.Compatible only with DSP508, DSP600 or HS401 self-centering adaptors 175-321-1 or 175-325-1.(set of sixteen, covers 4 wheel adaptors)
20-1792-1
20-1789-1
External tire clamp adaptorCompatible only with DSP508, DSP600 or HS401 self-centering adaptors 175-321-1 or 175-325-1.(set of four)
20-1789-1
30-419-1Icon Remote Indicator - New style remote indicator for WinAlign WA100 and WA200, Series 111, 211, 311, 411, 511, 611, 811 or PA100 Aligners.
30-419-1
30-421-1
Icon Cordless Remote Indicator - New style cordless remote indicator for WinAlign WA100 and WA200, Series 811, 611 with USB support and PA100 Aligners. Requires XF2 Pod Kit, 20-2072-1. XF2 Pod shipped standard with DSP500 Cordless Sensors after 6-27-06.
30-421-1
Wheel Alignment Systems
Page 14 of 32
P/N Alignment Accessories
30-418-1
Plus Cordless Remote Indicator - New style cordless remote indicator for WinAlign WA100 and WA200 and Series 811 Aligners. Records tire pressure, tread depth, ride height and measures tire temperature and frame angle. Includes Tire Temperature Probe. Requires XF2 Pod Kit, 20-2072-1 and WinAlign® 9.0. XF2 Pod shipped standard with DSP500 Cordless Sensors after 6-27-06.
30-418-1
20-2072-1
XF2 Pod Kit - XF communication for use with Plus Cordless Remote Indicator, 30-418-1-1 and Icon Cordless Remote Indicator, 30-421-1.This XF Pod is not compatible with DSP500 Cordless Sensors built prior to 6-27-06. XF2 Pod shipped standard with DSP500 Cordless Sensors after 6-27-06.
20-2072-1
20-1477-1Pair of 50mm electronic turnplates with protective covers. (Includes 20-664-1 cable kit for connecting to Hunter rack wiring kits.)
Electronic Turnplates
20-1487-1 Pair of 50mm electronic turnplates with protective covers (turnplates only)
Electronic Turnplates
20-1386-1Cable Kit - Connects (2) 50mm turnplates to DSP300HFSS sensors.
Cable Kit
20-1469-1Y-Cable Kit - Connects (2) 50mm turnplates to DSP300 non-HFSS and DSP500 non-XF sensors). (requires 20-1386-1, above)
20-1469-1
Wheel Alignment Systems
Page 15 of 32
P/N Alignment Accessories
20-1097-1
Increases maximum wheel size that the self-centering adaptor will fit by 2 ½ inches.Use with DSP308/DSP208/DSP258 Sensors self-centering adaptors, 175-200-1, 175-285-1, 175-304-1, and 175-305-1.(set of four, covers 4 wheel adaptors) (For VAG 1944B “conventional” systems only)
20-1097-1
20-1558-1
External tire clamp adaptorUse with DSP308/DSP208/DSP258 Sensors self-centering adaptors, 175-200-1, 175-285-1, 175-304-1, and 175-305-1.(set of four)
20-1558-1
20-1559-1
Upgrades Tire Clamp Adaptor Kit 20-1108-1 to 20-1558-1Use with self-centering adaptors, 175-200-1, 175-285-1, 175-304-1, and 175-305-1.(set of four)
20-1559-1
Wheel Alignment Systems
Page 16 of 32
Recommended Rack Groups
RX10-ISAU
P/N DescriptionNEW
RX10-ISAUARX Scissor Rack, 10,000 lb. Capacity, Air line kit included, (2) 6,000 lb. Capacity Swing Air Jacks, 161” max. Align Wheelbase, w/Power Slide Slipplates, w/InflationStation.
NEW
RX10-PSAUARX Scissor Rack, 10,000 lb. Capacity, Air line kit included, (2) 6,000 lb. Capacity Swing AirJacks, 161” max. Align Wheelbase, w/Power Slide Slipplates.
NEW
RX10JAUARX Scissor Rack, 10,000 lb. Capacity, Air line kit included (2) 6,000 lb. Capacity Swing Air Jacks, 161” max. Align Wheelbase.
-AU is medium gray and dark gray color scheme.
Rack Groups for Flush Mount Applications
RX10F-ISAU
P/N DescriptionNEW
RX10F-ISAUARX Scissor Rack, 10,000 lb. Capacity, Air line kit included, (2) 6,000 lb. Capacity Swing Air Jacks, 161” max. Align Wheelbase, w/Power Slide Slipplates, w/InflationStation. Flush Mount.
NEW
RX10F-PSAUARX Scissor Rack, 10,000 lb. Capacity, Air line kit included, (2) 6,000 lb. Capacity Swing Air Jacks, 161” max. Align Wheelbase, w/Power Slide Slipplates. Flush Mount.
NEW
RX10JFAUARX Scissor Rack, 10,000 lb. Capacity, Air line kit included (2) 6,000 lb. Capacity Swing Air Jacks, 161” max. Align Wheelbase. Flush Mount.
-PS and -IS groups suitable for camera or conventional sensors. Use 50mm Low Friction Turnplates.
Note: A rack wiring kit can not be lowered into the pit required for flush mount. Therefore, the electronic turnplates must plug into the sensors. Order 20-1386-1 for HFSS sensors or 20-1386-1 and 20-1469-1 for non-HFSS sensors or HFSS sensors running on cable power.
Options for RX RacksP/N Description
20-2336-1 Powerslide Low Friction Turnplates (50mm)
20-2173-1A Alignment Rack Lighting Kit - (4 light kit) Lighting turns on and off automatically as rack is raised or lowered.
20-1579-1 Center Lift Jack Adaptor for Swing Air jacks, includes clip-on storage tray.
Required Options for Existing Racks (VAG 1944B)
Wheel Alignment Systems
Page 17 of 32
The rack wiring kit and rear spacer kit are required for existing racks when using sensors equipped with 8 toe sensors (DSP208, 258, 308 or 508).
P/N Description20-593-1 Rack wiring kit (4 box)20-719-1 Rack wiring kit (2 Box)20-1192-1 Rear spacer kit (D Racks, L202, RL and RM)20-1193-1 Rear spacer kit (L401, L404 and RLHD)20-1678-1 Rear spacer kit (incl. in pkgs.) (RX-9)20-1679-1 Rear spacer kit (incl. in pkgs.) (RX-9-L, RX-12-L and RX-12-XL)20-1683-1 Rear spacer kit (L421, L424)
Wheel and Tire Service Equipment
Page 18 of 32
Road Force Measurement System (VAS6230)
Recommended VAG VAS6230 Wheel Balancer P/N Description
VAS6230A/4A*(GSP972307VAG)
GSP9723 with printer, wheel lift, StraightTrak, Road Force Measurement, Run Out Measurement, and Balancer, 17” LCD, Auto Double Dataset, Spindle-Lok, Servo- Stop, Direct Weight Placement and Quick Thread Auto Clamping, Precision Direct Fit Collet Kit including Adjustable Flange Plate with Accessories (208-230V/8 Amp, NEMA #L6-20P, 1Ph. direct current patented Servo Drive system)
VAS6230A/2
* Note: Balancers, Lathes and Tire Changers Products with VAG or VASin the part number are painted with the VAG gray and black color scheme, others are standard Hunter red.
Other Balancers, Brake Lathes and Tire Changer Groups
Wheel Balancers
VAS6230A/3A
(GSP972305VAG)
GSP9723 with printer, StraightTrak, Road Force Measurement, Run Out Measurement, and Balancer, 17” LCD, Auto Double Dataset, Spindle-Lok, Servo- Stop, Direct Weight Placement and Quick Thread Auto Clamping, Precision Direct Fit Collet Kit including Adjustable Flange Plate with Accessories (208-230V/8 Amp, NEMA #L6-20P, 1Ph. direct current patented Servo Drive system)
VAS6230A/2A
(GSP972207VAG)
GSP9722 with printer, wheel lift, StraightTrak, Road Force Measurement, Run Out Measurement, and Balancer, 17” LCD, Auto Double Dataset, Spindle-Lok, Servo- Stop, Direct Weight Placement and Wing Nut, Precision Direct Fit Collet Kit including Adjustable FlangePlate with Accessories (208-230V/8 Amp, NEMA #L6-20P, 1Ph. direct current patented Servo Drive system)
VAS6230A/1A
(GSP972205VAG)
GSP9722 with printer, StraightTrak, Road Force Measurement, Run Out Measurement, and Balancer, 17” LCD, Auto Double Dataset, Spindle-Lok, Servo- Stop, Direct Weight Placement and Wing Nut, Precision Direct Fit Collet Kit including Adjustable Flange Plate with Accessories (208-230V/8 Amp, NEMA #L6-20P, 1Ph. direct current patented Servo Drive system)
20-2166-1B HammerHead Top Dead Center Laser, Field Retrofit Kit
P/N Wheel Balancers
P/N Wheel Balancer Options & Accessories
Wheel and Tire Service Equipment
Page 19 of 32
Recommended VAG Tire ChangersP/N Description
TCX575BLKA
(VAS6655)
Leverless Tire Changer, Table-Top Design, Automatic Swing Arm, Bead Press System, 30” Extension Jaws, Std. Accessories (220v, 15-amp, 1 Ph., NEMA #L6-20R & compressed air supply required)
TCX575WBLKA
(VAS6655)
Leverless Tire Changer with Wheel Lift, Table-Top Design, Automatic Swing Arm, Bead Press System, 30” Extension Jaws, Std. Accessories (220v, 15-amp, 1 Ph., NEMA #L6-20R & compressed air supply required)
TCX575BLK
Combination Brake LatheP/N Description
BL505D-ABA BL505 and Bench and Digi-Cal Measuring System, No AdaptorsBL505D-AA BL505 and Digi-Cal, No Bench, No AdaptorsBL505-ABA BL505 and Bench, No AdaptorsBL505-AA BL505, No Bench, No Adaptors
The above groups require a HunterProTM Adaptor Kit listed below.
HunterProTM Adaptor KitP/N Description
20-1665-1 HunterProTM Level 1, Car and some LT Truck Rotors, Drums, some Flywheels 20-1666-1 HunterProTM Level 2, Car and LT Truck Rotors, Drums, some Flywheels
On-Car Brake LatheP/N Description
OCL400-VAOCL410 with ServoDrive, Computer Compensation, Standard Passenger Car Flange Plates, Offset Flange RP9-9032.0941, Tools and Accessories, 25 ft. Power Cable, 1 1/2 HP Motor, 115v/220v, 50/60Hz
Upgrading to VAG 1944B and VAS6292 Specifications
Page 20 of 32
Upgrading older systems to meet VAG 1944B and VAS6292 Requirements
Hunter Mandatory Accessories for Existing Installations with Camera Sensors- For existing installations the following criteria must be met:One of the following Hunter camera sensor types:
DSP600FMW, DSP600PM, DSP600WMH ,DSP600WMSor HS401WM, HS401FM, HS401PS, HS401LC, HS401ML, HS401CM (large cabinet only) with High Definition Targets.
Current WinAlign® Software and specification databaseElectronic Software Authorization Key for V.A.G softwareExternal Tire Clamp Adaptor, 20-1789-1, for DSP600 or HS401 Sensors (Required for Audi
Dealers only)Stainless steel turnplates - low friction (20-1918-1)Radar Alignment System Kit, 20-1835-1, for LDW/ADR/ACC adjustment.Network ModuleWindows 2000, XP Professional or Windows Vista Business or BasicWA Series or Series 811 or 811P computer (or greater)19” UVGA Color monitor (1024 x 768)Color printerLive Ride Height Targets, 20-2050-1Note: Dealer must have or order a VAG compliant rack capable of stainless steel
turnplates and two jacks to meet requirements.
VAG LDR/ADR/ACC TOOL CLEARANCE NOTE:
Some VAG vehicles have radar-based cruise control options. The aiming of these systems requires a special tool to be placed in front of the vehicle while alignment sensors are mounted to the tool and the rear axle of the vehicle.
Refer to page 2 for more information.
Upgrading to VAG 1944B and VAS6292 Specifications
Page 21 of 32
Camera Sensors for Existing Installations
LC ML CM
WM (Straight Installation)
WM(Angled Installation)
FM PSSensors shown with optional
alignment rack.P/N HS401 Family Sensors
LCHS401LCVAG Sensors - An electrically operated vertical camera lift provides a full range of travel for additional lift height or to work with the vehicle on the floor. Includes 4 Cameras, High Definition Targets, Wheel Adaptors, and turnplate bridges.
MLHS401MLVAG Sensors - A manually operated vertical camera lift provides a full range of travel for additional lift height or to work with the vehicle on the floor. Includes 4 Cameras, High Definition Targets, Wheel Adaptors, and turnplate bridges.
CMHS401CMVAG Sensors – Portable cabinet mount sensors mount to a WA140 or WA240 console and may be rolled from bay to bay. A manually operated vertical camera lift provides a full range of travel for additional lift height or to work with the vehicle on the floor. Includes 4 Cameras, High Definition Targets, Wheel Adaptors, turnplate bridges, and one set of anchor plates. (CM not available for compact cabinet)
WMHS401WMVAG Sensors - Suitable for most installations. Wall mounted for straight or angled (herringbone) approach bays. Patented fixed camera configuration. NO MOVING PARTS, yet still allows the technician to lift the vehicle to a comfortable working height. Includes 4 Cameras, High Definition Targets, Wheel Adaptors, and turnplate bridges.
FMHS401FMVAG Sensors - Floor mounted overhead camera configuration suitable for drive through. Patented fixed camera configuration. NO MOVING PARTS, yet still allows the technician to lift the vehicle to a comfortable working height. Includes 4 Cameras, High Definition Targets, Wheel Adaptors, and turnplate bridges.
PSHS401PSVAG Sensors - Overhead camera mounting configuration suitable for use in a PN pit. Patented fixed camera configuration. NO MOVING PARTS. Includes 4 Cameras, High Definition Targets, Wheel Adaptors, and turnplate bridges.
See “VAG Mandatory Tools” section on page 24 for additional requirements.
Radar Alignment System Kit 20-1835-1 is a V.A.G. mandatory tool for LDW/ADR/ACC adjustment and must be ordered for use with DSP600 or HS401 Series Sensors. The Radar Alignment System Kit is used with VAS6430 calibration bar and fixture. See page 24 for details.
If upgrading an existing VAG 811 console to HS401 Series Sensors with High Definition Targets follow the criteria below:
High Definition targets require WinAlign 10.X or higher. WinAlign 10.X is not supported on 811’s with Windows 2000. Please order 811 to WinAlign WA200 Upgrade Kit 20-2177-1-V (existing USB box required) or 811 to WinAlign WA100 Upgrade Kit 20-2176-1-V (existing USB box required).
Upgrading to VAG 1944B and VAS6292 Specifications
Page 22 of 32
If upgrading an existing Hunter 811 console to use HS401 Series Sensors with High Definition Targets follow the criteria below:
High Definition targets require WinAlign 10.X or higher. WinAlign 10.X is not supported on 811’s with Windows 2000. Please order Hunter 811 to WinAlign WA200 Upgrade Kit 20-2296-1-V (existing USB box required) or 811 to WinAlign WA100 Upgrade Kit 20-2295-1-V (existing USB box required).
If upgrading an existing 811 console to use HS401 Series Sensors with Hexagonal Targets follow the criteria below:
811’s with Windows 2000 Professional require WinAlign 7.X, 8.X or 9.X that support HS401 Series Sensors with hexagonal targets
811’s with Windows XP Professional require WinAlign 7.X or higher that support HS401 Series Sensors with hexagonal targets
Upgrading to VAG 1944B and VAS6292 Specifications
Page 23 of 32
V.A.G. Mandatory Tools
P/N Description
20-1835-1A Radar Alignment System Kit for ADR/ACC adjustment. Must be used with VAS6041 or VAS6190 calibration bar and fixture. Includes 2 cameras assemblies and cables.
20-1789-1 External tire clamp adaptor (Required for Audi Dealers). Compatible only with DSP508,DSP600 or HS401 self-centering adaptors 175-321-1 or 175-325-1.
20-2050-1 Live Ride Height Targets - For use with all DSP600 or HS401 sensors. Includes four Live Ride Height Targets and 20 adhesive strips. (Requires WinAlign® 9.0 or greater)
20-2112-1 Live Ride Height Adhesive Strips Kit - For use with Live Ride Height Targets (100 Adhesive Strips)
V.A.G. Alignment Tool # 1925
Tool used to adjust the Front Axle Toe Curve when using Hunter Engineering Company Racks. This tool must have been modified per Hunter kit 20-1194-1.This tool must be ordered from VWoA.
VAS6430 (ADR)
LDW/ADR/ACC Calibration bar and fixture is used to perform Adaptive Cruise Control (ACC) and or Lane Departure Warning (LDW) calibration on Audi vehicles equipped with these systems. It can also be used to perform Automatic Distance Regulation (ADR) system adjustments on VW models.This tool must be ordered from VWoA.
20-1835-1 VAS6430 (LDW/ADR/ACC)Radar Alignment System Kit 20-1835-1 is a V.A.G. mandatory tool for LDW/ADR/ACC adjustment and must be ordered for usewith DSP600 or HS401 Series Sensors. The Radar Alignment System Kit is used with VAS6430 calibration bar and fixture.
Upgrading to VAG 1944B and VAS6292 Specifications
Page 24 of 32
Hunter Mandatory Accessories for Existing Installations with Conventional Sensors- For existing installations the following criteria must be met:Sensors equipped with 8 toe sensors are required. (208, 258, 308 or 508)Current WinAlign® Software and specification databaseElectronic Software Authorization Key for V.A.G softwareExternal tire clamp adaptor 20-1789-1 for DSP508 Sensors or 20-1558-1 for DSP308/DSP208/DSP258
Sensors (Required for Audi Dealers only)Electronic turnplates (convention sensors only)Rack wiring kitNetwork ModuleWindows 2000, XP Professional or Windows VistaWA Series or Series 811 or 811P computer (or greater)19” UVGA Color monitor (1024 x 768)Color printerRide Height Handheld Wireless Remote Control, 20-1928-1 or 20-1885-1Note: Dealer must have or order a VAG compliant rack capable of accepting electronic plates and
two jacks to meet requirements.
RF cordless sensors are not compatible with the WinAlign WA upgrade kit. Alternatives are to either run the sensors with cords, or pay to upgrade the sensors to HFSS. Refer to Sales Bulletin 03-061 and Service Bulletin 03-067 for additional details.
V.A.G. Mandatory ToolsP/N Description
20-1789-1 External tire clamp adaptor (Required for Audi Dealers). Compatible only with DSP508 or DSP600 self-centering adaptors 175-321-1 or 175-325-1.
20-1558-1External tire clamp adaptor (Required for Audi Dealers). Compatible only with DSP308/DSP208/DSP258 self-centering adaptors, 175-200-1, 175-285-1, 175-304-1, and 175-305-1.
20-1885-1
Ride Height Handheld Wireless Remote Control. This kit contains only the Ride Height Handheld Wireless Remote Control. This kit requires USB assembly 232-185-1, which shipped standard with VAS6292 aligners after June 15, 2004. If USB board is needed order Ride Height Handheld Wireless Remote Control Upgrade Kit 20-1928-1.
20-1928-1ARide Height Handheld Wireless Remote Control Upgrade Kit. Includes Ride Height Handheld Wireless Remote Control Kit 20-1885-1 and USB Upgrade Kit 20-1923-1 to upgrade an existing VAS6292 aligner.
V.A.G. Alignment Tool # 1925
Tool used to adjust the Front Axle Toe Curve when using Hunter Engineering Company Racks. This tool must have been modified per Hunter kit 20-1194-1.This tool must be ordered from VWoA.
VAS6430
LDW/ADR/ACC Calibration bar and fixture is used to perform Adaptive Cruise Control (ACC) and or Lane Departure Warning (LDW) calibration on Audi vehicles equipped with these systems. It can also be used to perform Automatic Distance Regulation (ADR) system adjustments on VW models.This tool must be ordered from VWoA.
Upgrading to VAG 1944B and VAS6292 Specifications
Page 25 of 32
Upgraded R Cabinet
211/411/611/811 to WinAlign WA Upgrades include the following:
Upgraded PC Hardware WinAlign® software (current version)Electronic Software Authorization Key for VAG softwareMouseWindows Vista Business or BasiciShop� and ASANet� compatibleRefer to PC Comparison below for additional information
3-Year Warranty(On PC and Installed Components)
Upgrade KitPC Speaker, Brackets and cables to upgrade a 211/411/611 to WAFront cabinet decal to signify compliance with VAG 1944 “B” requirements
PC Comparison
WinAlign WA200 WinAlign WA100Processor Intel Core 2 Duo Processor – 2.8 GHz (or
greater)Intel Pentium Dual-Core Processor - 2.4
GHz (or greater)Operating System Windows Vista Business Windows Vista BasicRAM 3 GB 2 GBHDD 80.0 GB SATA (or greater) 80.0 GB SATA (or greater)Motherboard Intel IntelDVD / CD Drive DVD/CD-RW drive DVD/CD-RW driveUSB USB 2.0 (2 on Front / 4 on Rear) USB 2.0 (2 on Front / 4 on Rear)Video 64 MB (integrated) 64 MB (integrated)Network Connection Kit Standard OptionalWireless Network Connection Kit Standard OptionalDigital Photo Standard OptionalDigital Video Standard OptionalVID Updates 2 Years Free 2 Years FreeWebSpecs 2 Years Free Optional
Upgrading to VAG 1944B and VAS6292 Specifications
Page 26 of 32
Upgrade Options for Existing VAG Aligners with VAG Program KeyAll upgrade kits listed below conform to VAG 1944B and VAS6292 specifications.All upgrade kits on this page should be ordered when upgrading an existing VAG aligner. For the upgrade to work properly, the following must be present in the existing aligner:� VAG Program Key - (verify program key installed by pressing "Show Authorization" key from logo screen)
If a Hunter WinAlign Program Key is installed in the existing aligner, refer to page 31 for upgrade options for these aligners.VAG requires a color printer and 19” UVGA monitor. The older 19” monitor with a sheet metal housing is unacceptable.Select the appropriate upgrade kit below if unit does not have a color printer or 19” UVGA monitor.Additional equipment may be required if upgrading a system with DSP200/250 sensors which utilize RF wireless communications, refer to Sales Bulletin 03-061 and Service Bulletin 03-067.
P/N Series 211/411/611 to WinAlign WA200 Upgrade Kits
WinAlign WA200 Configured ComputerUSB Retrofit Kit (Console specific) WinAlign WA200 PC Retrofit Accessory (Console specific)
20-1752-P-VAP211/P411 to WinAlign WA200 Upgrade Kit - Upgrades any P211 or P411 console configuration to the latest WinAlign WA200 PC hardware. (No exchanges and no deletions.) Note that this upgrade kit requires that a color printer and minimum 19” UVGA monitor be present.
20-1752-S-VAS411/S611 to WinAlign WA200 Upgrade Kit - Upgrades any S411 or S611 console configuration to the latest WinAlign WA200 PC hardware. (No exchanges and no deletions.) Note that this upgrade kit requires that a color printer and a minimum 19” UVGA monitor be present.
20-1752-R-VAR611 to WinAlign WA200 Upgrade Kit - Upgrades any R611 console configuration to the latest WinAlign WA200 PC hardware. (No exchanges and no deletions.) Note that this upgrade kit requires that a color printer and minimum 19” UVGA monitor be present.
WinAlign WA200 Configured ComputerHP Color PrinterUSB Retrofit Kit (Console specific) WinAlign WA200 PC Retrofit Accessory (Console specific)
20-1752-CP-VAP211/P411 to WinAlign WA200 Upgrade Kit with color printer - Upgrades any P211 or P411 configuration to the latest WinAlign WA200 hardware, and color printer. (No exchanges and no deletions.) Note that this upgrade requires that a minimum 19” UVGA monitor be present.
20-1752-CS-VAS411/S611 to WinAlign WA200 Upgrade Kit with color printer - Upgrades any S411 or S611 configuration to the latest WinAlign WA200 hardware, and color printer. (No exchanges and no deletions.) Note that this upgrade requires that a minimum 19” UVGA monitor be present.
20-1752-CR-VAR611 to WinAlign WA200 Upgrade Kit with color printer - Upgrades any R611 configuration to the latest WinAlign WA200 hardware, and color printer. (No exchanges and no deletions.) Note that this upgrade requires that a minimum 19” UVGA monitor be present.
WinAlign WA200 Configured ComputerHP Color Printer20” Widescreen LCD Flat Panel DisplayUSB Retrofit Kit (Console specific) WinAlign WA200 PC Retrofit Accessory (Console specific)
20-1752-C20LP-VAP211/P411 to WinAlign WA200 Upgrade Kit with color printer and 20” Widescreen LCD - Complete kit, upgrades any P211 or P411 configuration to the latest WinAlign WA200 hardware, printer and 20” Widescreen LCD. (No exchanges and no deletions.)
20-1752-C20LS-VAS411/S611 to WinAlign WA200 Upgrade Kit with color printer and 20” Widescreen LCD - Complete kit, upgrades any S411 or S611 configuration to the latest WinAlign WA200 hardware, printer and 20” Widescreen LCD. (No exchanges and no deletions.)
20-1752-C20LR-VAR611 to WinAlign WA200 Upgrade Kit with color printer and 20” Widescreen LCD - Complete kit, upgrades any R611 configuration to the latest WinAlign WA200 hardware, printer and 20” Widescreen LCD. (No exchanges and no deletions.)
Upgrading to VAG 1944B and VAS6292 Specifications
Page 27 of 32
P/N Series 211/411/611 to WinAlign WA100 Upgrade Kits
WinAlign WA100 Configured ComputerUSB Retrofit Kit (Console specific) WinAlign WA100 PC Retrofit Accessory (Console specific)
20-1751-P-VAP211/P411 to WinAlign WA100 Upgrade Kit - Upgrades any P211 or P411 console configuration to the latest WinAlign WA100 PC hardware. (No exchanges and no deletions.) Note that this upgrade kit requires that a color printer and minimum 19” UVGA monitor be present.
20-1751-S-VAS411/S611 to WinAlign WA100 Upgrade Kit - Upgrades any S411 or S611 console configuration to the latest WinAlign WA100 PC hardware. (No exchanges and no deletions.) Note that this upgrade kit requires that a color printer and a minimum 19” UVGA monitor be present.
20-1751-R-VAR611 to WinAlign WA100 Upgrade Kit - Upgrades any R611 console configuration to the latest WinAlign WA100 PC hardware. (No exchanges and no deletions.) Note that this upgrade kit requires that a color printer and minimum 19” UVGA monitor be present.
WinAlign WA100 Configured ComputerHP Color PrinterUSB Retrofit Kit (Console specific) WinAlign WA100 PC Retrofit Accessory (Console specific)
20-1751-CP-VAP211/P411 to WinAlign WA100 Upgrade Kit with color printer - Upgrades any P211 or P411 configuration to the latest WinAlign WA100 hardware and color printer. (No exchanges and no deletions.) Note that this upgrade requires that a minimum 19” UVGA monitor be present.
20-1751-CS-VAS411/S611 to WinAlign WA100 Upgrade Kit with color printer - Upgrades any S411 or S611 configuration to the latest WinAlign WA100 hardware and color printer. (No exchanges and no deletions.) Note that this upgrade requires that a minimum 19” UVGA monitor be present.
20-1751-CR-VAR611 to WinAlign WA100 Upgrade Kit with color printer - Upgrades any R611 configuration to the latest WinAlign WA100 hardware and color printer. (No exchanges and no deletions.) Note that this upgrade requires that a minimum 19” UVGA monitor be present.
WinAlign WA100 Configured ComputerHP Color Printer19” LCDUSB Retrofit Kit (Console specific) WinAlign WA100 PC Retrofit Accessory (Console specific)
20-1751-C19LP-VAP211/P411 to WinAlign WA100 Upgrade Kit with color printer and 19” LCD monitor - Complete kit, upgrades any P211 or P411 configuration to the latest WinAlign WA100 hardware, printer, and 19” LCD (No exchanges and no deletions.)
20-1751-C19LS-VAS411/S611 to WinAlign WA100 Upgrade Kit with color printer and 19” LCD - Complete kit, upgrades any S411 or S611 configuration to the latest WinAlign WA100 hardware, printer, and 19” LCD. (No exchanges and no deletions.)
20-1751-C19LR-VAR611 to WinAlign WA100 Upgrade Kit with color printer and 19” LCD - Complete kit, upgrades any R611 configuration to the latest WinAlign WA100 hardware, printer, and 19” LCD (No exchanges and no deletions.)
P/N Series WinAlign WA100 and WinAlign WA200 Upgrade Kit Options
20-1970-1BDigital-PHOTO Option - Multimedia Software on DVD. Provides digital inspection and adjustment photos. (Videos require Combination kit 20-1761-1) (If your 211/411/611 user already owns this option, the electronic key will work with the new PC.) (Standard on all WinAlign WA200 upgrade kits.)
20-1971-1BCombination Digital - PHOTO/VIDEO on DVD - Provides both digital inspection and adjustment photos, and AlignGuide� video instruction for inspection, adjustments, and operation. Includes electronic key.(Standard on all WinAlign WA200 upgrade kits.)
20-2211-1B Memory Upgrade Kit (1 GB) increases RAM by 1 GB.20-1760-1B Network Module - connects a Hunter WinAlign WA100 Aligner to a customer’s network. (Standard on all
WinAlign WA200 upgrade kits.)
20-2195-1B Wireless Network Module – connects a Hunter WinAlign WA100 Aligner to a customer’s wireless network. (Standard on all WinAlign WA200 upgrade kits.)
Upgrading to VAG 1944B and VAS6292 Specifications
Page 28 of 32
Upgrade Options for Existing VAG Aligners with VAG Program KeyThe kits below are for 811 consoles that have a USB box.All upgrade kits listed below conform to VAG 1944B and VAS6292 specifications.All upgrade kits on this page should be ordered when upgrading an existing VAG aligner. For the upgrade to work properly, the following must be present in the existing aligner:� VAG Program Key - (verify program key installed by pressing "Show Authorization" key from logo screen)
If a Hunter WinAlign Program Key is installed in the existing aligner, refer to page 31 for upgrade options for these aligners.VAG requires a color printer and 19” UVGA monitor. The older 19” monitor with a sheet metal housing is unacceptable. Select the appropriate upgrade kit below if unit does not have a color printer or 19” UVGA monitor.Additional equipment may be required if upgrading a system with DSP200/250 sensors which utilize RF wireless communications, refer to Sales Bulletin 03-061 and Service Bulletin 03-067.
P/N Series 811 to WinAlign WA200 Upgrade Kits
WinAlign WA200 Configured Computer
20-2177-1-VA811 to WinAlign WA200 Upgrade Kit - Upgrades VAG 811 console w/USB box and VAG key to the latest WinAlign WA200 PC hardware and VAG software/key. (No exchanges and no deletions). Requires that a USB box, color printer and minimum 19" UVGA monitor be present.
P/N Series 811 to WinAlign WA100 Upgrade Kits
WinAlign WA100 Configured Computer
20-2176-1-VA811 to WA100 Upgrade Kit - Upgrades VAG 811 console w/USB box and VAG key to the latest WinAlign WA100 PC hardware and VAG software/key. (No exchanges and no deletions). Requires that a USB box, color printer and minimum 19" UVGA monitor be present.
Upgrading to VAG 1944B and VAS6292 Specifications
Page 29 of 32
Upgrade Options for Existing Hunter Aligners with Hunter WinAlign Program Key to VAGAll upgrade kits listed below conform to VAG 1944B and VAS6292 specifications.All upgrade kits on this page should be ordered when upgrading an existing Hunter aligner. For the upgrade to work properly, the following must be present in the existing aligner:� Standard Hunter WinAlign Program Key - (verify program key installed by pressing "Show Authorization" key from
logo screen)If a VAG Program Key is installed in the existing aligner, refer to page 27 for upgrade options for these aligners.VAG requires a color printer and 19” UVGA monitor. The older 19” monitor with a sheet metal housing is unacceptable. Select the appropriate upgrade kit below if unit does not have a color printer or 19” UVGA monitor.Additional equipment may be required if upgrading a system with DSP200/250 sensors which utilize RF wireless communications, refer to Sales Bulletin 03-061 and Service Bulletin 03-067.
P/N Series 211/411/611 to WinAlign WA200 Upgrade Kits
WinAlign WA200 Configured ComputerUSB Retrofit Kit (Console specific) WinAlign WA200 PC Retrofit Accessory (Console specific)
20-2024-P-VAP211/P411 to WinAlign WA200 Upgrade Kit - Upgrades any P211 or P411 console configuration to the latest WinAlign WA200 PC hardware. (No exchanges and no deletions.) Note that this upgrade kit requires that a color printer and minimum 19” UVGA monitor be present.
20-2024-S-VAS411/S611 to WinAlign WA200 Upgrade Kit - Upgrades any S411 or S611 console configuration to the latest WinAlign WA200 PC hardware. (No exchanges and no deletions.) Note that this upgrade kit requires that a color printer and a minimum 19” UVGA monitor be present.
20-2024-R-VAR611 to WinAlign WA200 Upgrade Kit - Upgrades any R611 console configuration to the latest WinAlignWA200 PC hardware. (No exchanges and no deletions.) Note that this upgrade kit requires that a color printer and minimum 19” UVGA monitor be present.
WinAlign WA200 Configured ComputerHP Color PrinterUSB Retrofit Kit (Console specific) WinAlign WA200 PC Retrofit Accessory (Console specific)
20-2024-CP-VAP211/P411 to WinAlign WA200 Upgrade Kit with color printer - Upgrades any P211 or P411 configuration to the latest WinAlign WA200 hardware, and color printer. (No exchanges and no deletions.) Note that this upgrade requires that a minimum 19” UVGA monitor be present.
20-2024-CS-VAS411/S611 to WinAlign WA200 Upgrade Kit with color printer - Upgrades any S411 or S611 configuration to the latest WinAlign WA200 hardware, and color printer. (No exchanges and no deletions.) Note that this upgrade requires that a minimum 19” UVGA monitor be present.
20-2024-CR-VAR611 to WinAlign WA200 Upgrade Kit with color printer - Upgrades any R611 configuration to the latest WinAlign WA200 hardware, and color printer. (No exchanges and no deletions.) Note that this upgrade requires that a minimum 19” UVGA monitor be present.
WinAlign WA200 Configured ComputerHP Color Printer20” Widescreen LCD Flat Panel DisplayUSB Retrofit Kit (Console specific) WinAlign WA200 PC Retrofit Accessory (Console specific)
20-2024-C20LP-VAP211/P411 to WinAlign WA200 Upgrade Kit with color printer and 20” Widescreen LCD - Complete kit, upgrades any P211 or P411 configuration to the latest WinAlign WA200 hardware, printer and 20” Widescreen LCD (No exchanges and no deletions.)
20-2024-C20LS-VAS411/S611 to WinAlign WA200 Upgrade Kit with color printer and 20” Widescreen LCD - Complete kit, upgrades any S411 or S611 configuration to the latest WinAlign WA200 hardware, printer and 20” Widescreen LCD (No exchanges and no deletions.)
20-2024-C20LR-VAR611 to WinAlign WA200 Upgrade Kit with color printer and 20” Widescreen LCD - Complete kit, upgrades any R611 configuration to the latest WinAlign WA200 hardware, printer and 20” Widescreen LCD.(No exchanges and no deletions.)
Upgrading to VAG 1944B and VAS6292 Specifications
Page 30 of 32
P/N Series 211/411/611 to WinAlign WA100 Upgrade Kits
WinAlign WA100 Configured ComputerUSB Retrofit Kit (Console specific) WinAlign WA100 PC Retrofit Accessory (Console specific)
20-2023-P-VAP211/P411 to WinAlign WA100 Upgrade Kit - Upgrades any P211 or P411 console configuration to the latest WinAlign WA100 PC hardware. (No exchanges and no deletions.) Note that this upgrade kit requires that a color printer and minimum 19” UVGA monitor be present.
20-2023-S-VAS411/S611 to WinAlign WA100 Upgrade Kit - Upgrades any S411 or S611 console configuration to the latest WinAlign WA100 PC hardware. (No exchanges and no deletions.) Note that this upgrade kit requires that a color printer and a minimum 19” UVGA monitor be present.
20-2023-R-VAR611 to WinAlign WA100 Upgrade Kit - Upgrades any R611 console configuration to the latest WinAlign WA100 PC hardware. (No exchanges and no deletions.) Note that this upgrade kit requires that a color printer and minimum 19” UVGA monitor be present.
WinAlign WA100 Configured ComputerHP Color PrinterUSB Retrofit Kit (Console specific) WinAlign WA100 PC Retrofit Accessory (Console specific)
20-2023-CP-VAP211/P411 to WinAlign WA100 Upgrade Kit with color printer - Upgrades any P211 or P411 configuration to the latest WinAlign WA100 hardware and color printer. (No exchanges and no deletions.) Note that this upgrade requires that a minimum 19” UVGA monitor be present.
20-2023-CS-VAS411/S611 to WinAlign WA100 Upgrade Kit with color printer - Upgrades any S411 or S611 configuration to the latest WinAlign WA100 hardware and color printer. (No exchanges and no deletions.) Note that this upgrade requires that a minimum 19” UVGA monitor be present.
20-2023-CR-VAR611 to WinAlign WA100 Upgrade Kit with color printer - Upgrades any R611 configuration to the latest WinAlign WA100 hardware and color printer. (No exchanges and no deletions.) Note that this upgrade requires that a minimum 19” UVGA monitor be present.
WinAlign WA100 Configured ComputerHP Color Printer19” LCDUSB Retrofit Kit (Console specific) WinAlign WA100 PC Retrofit Accessory (Console specific)
20-2023-C19LP-VAP211/P411 to WinAlign WA100 Upgrade Kit with color printer and 19” LCD - Complete kit, upgrades any P211 or P411 configuration to the latest WinAlign WA100 hardware, printer, and 19” LCD (No exchanges and no deletions.)
20-2023-C19LS-VAS411/S611 to WinAlign WA100 Upgrade Kit with color printer and 19” LCD - Complete kit, upgradesany S411 or S611 configuration to the latest WinAlign WA100 hardware, printer, and 19” LCD. (No exchanges and no deletions.)
20-2023-C19LR-VAR611 to WinAlign WA100 Upgrade Kit with color printer and 19” LCD - Complete kit, upgrades any R611 configuration to the latest WinAlign WA100 hardware, printer, and 19” LCD (No exchanges and no deletions.)
Upgrading to VAG 1944B and VAS6292 Specifications
Page 31 of 32
Upgrade Options for Existing Hunter Aligners with Hunter WinAlign Program Key to VAGThe kits below are for 811 consoles that have a USB box.All upgrade kits listed below conform to VAG 1944B and VAS6292 specifications.All upgrade kits on this page should be ordered when upgrading an existing Hunter aligner. For the upgrade to work properly, the following must be present in the existing aligner:� Standard Hunter WinAlign Program Key - (verify program key installed by pressing "Show Authorization" key from
logo screen)If a VAG Program Key is installed in the existing aligner, refer to page 30 for upgrade options for these aligners.VAG requires a color printer and 19” UVGA monitor. The older 19” monitor with a sheet metal housing is unacceptable. Select the appropriate upgrade kit below if unit does not have a color printer or 19” UVGA monitor.Additional equipment may be required if upgrading a system with DSP200/250 sensors which utilize RF wireless communications, refer to Sales Bulletin 03-061 and Service Bulletin 03-067.
P/N Series 811 to WinAlign WA200 Upgrade Kits
WinAlign WA200 Configured Computer
20-2296-1-VA811 to WinAlign WA200 Upgrade Kit - Upgrades Hunter 811 console w/USB box and Hunter key to the latest WinAlign WA200 PC hardware and VAG software/key. (No exchanges and no deletions). Requires that a USB box, color printer and minimum 19" UVGA monitor be present.
P/N Series 811 to WinAlign WA100 Upgrade Kits
WinAlign WA100 Configured Computer
20-2295-1-VA811 to WinAlign WA100 Upgrade Kit - Upgrades Hunter 811 console w/USB box and Hunter key to the latest WinAlign WA100 PC hardware and VAG software/key. (No exchanges and no deletions). Requires that a USB box, color printer and minimum 19" UVGA monitor be present.
P/N Series WinAlign WA100 and WinAlign WA200 Upgrade Kit Options
20-1970-1BDigital-PHOTO Option - Multimedia Software on DVD. Provides digital inspection and adjustment photos. (Videos require Combination kit 20-1761-1) (If your 211/411/611 user already owns this option, the electronic key will work with the new PC.) (Standard on all WinAlign WA200 upgrade kits.)
20-1971-1BCombination Digital - PHOTO/VIDEO on DVD - Provides both digital inspection and adjustment photos, and AlignGuide� video instruction for inspection, adjustments, and operation. Includes electronic key.(Standard on all WinAlign WA200 upgrade kits.)
20-2211-1B Memory Upgrade Kit (1 GB) increases RAM by 1 GB.20-1760-1B Network Module - connects a Hunter WinAlign WA100 Aligner to a customer’s network. (Standard on all
WinAlign WA200 upgrade kits.)
20-2195-1B Wireless Network Module – connects a Hunter WinAlign WA100 Aligner to a customer’s wireless network. (Standard on all WinAlign WA200 upgrade kits.)
Reference
Page 32 of 32
Electronic Turnplate GuideRefer to Guide for Using Electronic Turnplates with DSP250/300/500 Sensors and Hunter Rack Wiring Kits Form 4599T.
Touareg Wheel Adaptors and Spade Sleeve GuideRefer to Service Bulletin: 03-051 dated July 18, 2003
TrainingNew VAG package does not include required suspension training. The dealer must call Dennis Tabaczka at VW/Audi headquarters to arrange for Hunter Training class participation. This will be a direct bill to the dealer. Dennis Tabaczka can be reached at: 248-754-4754. He will coordinate the training arrangements with the dealer and Hunter.