HUAWEI Outdoor Power System TP48120A-HD09A1 Datasheet
description
Transcript of HUAWEI Outdoor Power System TP48120A-HD09A1 Datasheet
Outdoor Power System
TP48120A-HD09A1 is a small outdoor cabinet to supply power for
wireless site. It configures 30A/50A rectifier modules to supply
rated of 120A output current, with heat exchange cooling for
equipment cabin and fan cooling for battery cabin. The cabinet is
compactly designed and support various installation scenarios
such as wall mounted, pole mounted or grounding. It has excellent
performance such as wide range of AC input voltage, high power
efficiency, surge protection, intelligent temperature and battery
management, and remote management.
Application Scenarios
Features
Introduction
TP48120A-HD09A1
High protection level:IP55
High efficiency of rectifier module: >96%
Super temperature performance for rectifiers with range from
-40℃ to 75℃
The power module supports hot-swapping, easy to install and
maintain
Temperature control system built-in door, easy to maintain,
clean, replace
Strong anti-theft design: Door embedded, hinge hidden, 3-
point lock, door sensor, support padlock
Intelligent battery management, prolong battery lifespan
Support battery anti-reverse function, reducing operating risk
Support remote management, reducing customer operating
cost
Outdoor wireless site
Outdoor enterprise communication network
Wall Mounted
Pole Mounted (Pole size:Φ114~220mm)
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
www.huawei.com
Specifications
Copyright © Huawei Technologies Co., Ltd. 2014. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
General Disclaimer
The information in this document may contain predictive statements including,without limitation, statements regarding the future
financial and operating results, future product portfolio, new technology, etc. There are a number of factors that could cause actual
results and developments to differ materially from those expressed or implied in the predictive statements. Therefore,
such information is provided for reference purpose only and constitutes neither an offer nor an acceptance.
Huawei may change the information at any time without notice.
System
Dimension 650mm(W)×650mm(D)×900mm(H) (excluding base)
Weight ≤75kg (without rectifier module and battery)
Cooling mode Heat exchange(equipment cabin) +Fan cooling(battery cabin)
Cooling capacity 1500W
Heater 500W(optional)
Installation mode On ground\Wall mounted\Pole mounted
Cabling mode At the bottom, inlet/outlet downwards
Maintenance mode In front
Noise ETS300 753 4.1E standard
Protection level IP55
Battery space 8U (100AH)
User space 8U
MTBF 200,000 hours
AC Distribution
Input mode Three phase, single phase
Input voltage 85VAC~300VAC, rated: 220VAC;
Input frequency 45~65Hz, rated value: 50Hz/60Hz
Input capacity 1×63A/3P
SPD 20kA/40kA, 8/20μs
Maintenance socket(AC output) Universal
AC output
Three phase/single phase: 1×16A/1P(maintenance socket) 1×16A/1P
DC Distribution
Output voltage 42~58VDC, rated value: 53.5VDC
Maximum capacity 120A
Battery branch 1x125A MCB
LLVD branch 1×80A MCB, 3×30A FUSE
BLVD branch 3×30A FUSE
SPD 10kA/20kA, 8/20μs
Rectifier
Input voltage 85VAC~300VAC, rated 220VAC
Rated power 30A/50A
Working temperature -40℃~+75℃
Weight <2kg
Power factor ≥0.99
THD ≤5%
Controller
Signal input 3 AI(battery temp., ambient temp., ambient humidity)
9 DI(water, smoke, gate, 6 common DI)
Alarm output 8 dry contact
Communication port RS232, RS485, SNMP
Storage capacity Up to 1000 historical records
Display mode LCD
Environment
Operating temperature -40℃~+45℃ (+ solar radiation)
Storage temperature -40℃~+70℃
Operating humidity 5%~95%(non-condensing)
Altitude 0~4000m