Huawei Fwt Data Service User Ptcl
-
Upload
sanaullah-iqbal -
Category
Documents
-
view
235 -
download
0
Transcript of Huawei Fwt Data Service User Ptcl
HUAWEI
HUAWEI Fixed Wireless Terminal
Data Service User Guide
V200R002
HUAWEI Fixed Wireless Terminal
Data Service User Guide
Manual Version 01 (2007-07-10)
Product Version V200R002
Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. Please feel free to contact our local office or company headquarters.
Huawei Technologies Co., Ltd.
Address: Administration Building, Huawei Technologies Co., Ltd.,
Bantian, Longgang District, Shenzhen, People's Republic of China
Postal Code: 518129
Website: http://www.huawei.com
Email: [email protected]
Copyright © Huawei Technologies Co., Ltd. 2007. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei
Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.
About This Manual
Related Manuals
The following manuals provide more information about the HUAWEI Fixed Wireless Terminal.
Manual Content
HUAWEI Fixed Wireless Terminal User Guide
It provides information for the terminal installation, operation, usage and maintenance of FWT.
HUAWEI Fixed Wireless Terminal Data Service User Guide
It is used for assisting the users in performing data services of FWT. (Delivered with a CD-ROM)
Organization
HUAWEI Fixed Wireless Terminal Data Service User Guide introduces how to perform the data service of HUAWEI Fixed Wireless Terminal (hereinafter referred to as FWT).
Chapter 1 Overview describes the modem installation integrated with FWT.
Chapter 2 Wireless Data Service elaborates the operation of data service, including Connect management program installation, dial-up and PC fax service, etc.
Chapter 3 Precautions and Troubleshooting describes the precautions of data service conduct and introduces common faults and handling methods.
Intended Audience
The manual is intended for the user who owns the FWT Data Kit.
Environmental Protection
This product has been designed to comply with the requirements on environmental protection. For the proper storage, use and disposal of this product, national laws and regulations must be observed.
i
Contents 1 Overview ...............................................................................................................................1
Installation Overview ....................................................................................................1 PC Requirements ...........................................................................................................1
2 Wireless Data Service ...........................................................................................................2 Installing PTCL Connect ...............................................................................................2 Applying the Data Service ............................................................................................3
3 Precautions and Troubleshooting..........................................................................................8 Precautions.....................................................................................................................8 Troubleshooting.............................................................................................................8
1
1 Overview
Installation Overview The Fixed Wireless Terminal (FWT) has a built-in modem. Thus, you can browse Web pages or download data through a universal serial bus (USB) cable.
The usage ofyou need to in
the modem is as simple as a standard modem. Before accessing the Internet, stall the driver from the delivered CD. A USB cable is delivered with the data
kit. If ne
Note: a PC, see "Connecting the FWT to a PC" of HUAWEI l User Guide.
cessary, you can purchase a USB cable from a local dealer.
To connect a FWT with Fixed Wireless Termina
PC Requirements The configuration requirement of a PC is as follows:
1. CPU: Pentium 100 or above Operating 2. system (OS): Windows 98, Windows 2000 or Windows XP
. USB: USB1.1 or above Applications: Internet Explorer (IE) or a file transfer protocol (FTP) software is
installed
34.
2
2 Service Wireless Data
Installing PTCL Connect This chapter introduces how to install the PTCL Connect management program (hereinafter
and the hardware driver. The procedures are for your referred to as PTCL Connect) eref rence only.
Installing PTCL Connect 1. Use
Noing the program, y
stallation disk into the CD-ROM.
3. The
the USB cable to connect the FWT and a PC.
te: If the Win98 OS is in use, before install ou need to disconnect the FWT with the PC.
2. Put the in
setup program automatically starts. Then, the installation interface appears.
Note:
roceed. nse Agreement carefully. Then select I accept the terms of the license and click Next.
6. Sele
Note:
t box, enter the name. Then click Next. 8. If a prom re has not passed Windows Logo testing is
ontinumplete.
10. A short-cut icon
If the setup program does not automatically start, find the setup.exe file and double-click it to start the installation.
4. According to the instructions, click Next to p5. Read Lice
agreementct an installation path and click Next.
If you do not select a path, the default path is used. You can click Change to change the path.
7. In the Program Folder texpt indicating that the softwa
displayed, click C e Anyway to proceed. 9. Click Finish to co
appears on the PC desktop.
3
Note: If the Win98 OS is in use, after the FWT manager program is installed, you need to connect the FWT to the PC with the provided data cable.
Applying the Data Service You can apply and enjoy such data services as Web browse and PC fax service. For details, consult your service provider.
Configuring the Network Connection Before accessing the Internet, you need to configure the network connection. If you want to apply the default settings of PTCL Connect, you can skip operations in this section.
Creating a Profile 1. Use the USB cable to connect the FWT and a PC.
2. Double-click to access PTCL Connect.
3. Click Settings to access the configuration interface.
4
4. Click New to create a profile. Enter the profile name, number, username, and
password.
Modifying a Profile 1. In the home screen of PTCL Connect, click Settings to access the configuration
interface. 2. In the Choose Profile Name drop-down box, select a profile. Click Modify. 3. Modify the settings and click Save to save the result.
Deleting a Profile 1. In the home screen of PTCL Connect, click Settings to access the configuration
interface. 2. In the Choose Profile Name drop-down box, select a profile. Click Remove to
delete the profile.
5
Dialing Up 1. Click Settings to access the configuration interface. 2. Select a profile In the Choose Profile Name drop-down box or create a profile. Then
click OK. 3. Click Connect to dial up. After the login completes, you can access the Internet.
Caution: The Number, the Username, and the Password vary with networks. For details,
consult your service provider. The connection rate shown after the dial-up is connected may be the
connection rate of the serial port. For details, consult your service provider.
PC Fax Service You can send or receive a fax. You can select PC fax software freely.
Note: For the usage of PC fax software, see the description of particular software. This guide only describes operations on the FWT to use the PC fax function.
Preparations Before using the data service, do the following:
1. Install the modem driver on a PC. 2. Install the PC fax software on the PC. 3. Connect the USB port of the USB cable to a PC and the other side to the FWT.
Using the PC Fax Function Before faxing, set the baud rate of the serial port to 19200 bit/s. For detailed steps, see 0.
Setting the baud rate
Product Steps ETS2000 Series (with the SMS function)
1. Select Data Service> Data Rate. Then press <OK>.The baud rate is displayed.
2. Press or to set the baud rate to 19200 bit/s. 3. Press OK to save the setting.
6
ETS2000 Series (without the SMS function)
1. Press SET/STORE to enter the menu selection.
2. Use the left or right navigation key to select .3. Press SET/STORE to enter the parameter configuration. 4. Use the left or right navigation key to set the serial baud rate as
19200 bit/s. 5. Press SET/STORE to save the configuration.
ETS1000 Series
1. Enter the operation code ##43* through the phone connected
to the FWT (when you hear the dialing tone after picking up the handset).
2. Set the baud rate of the serial port to 19200 bit/s.
Note: If you unplug the USB cable and plug it to the FWT again, the baud rate of
the FWT is restored to 230400 bit/s. The baud rate of the FWT must be the same as that of the PC fax software.
For detailed steps, see the instruction of particular software.
Sending/Receiving a PC Fax Before the FWT receives or sends a PC fax, set the FWT to the fax mode. Then the FWT stays in the fax mode until you power off it. To use the voice services, turn off the fax mode. For detailed steps, see 0.
Setting / Exiting the fax mode
Product Steps ETS2000 Series (with the SMS function)
1. Select Data Service> FAX Mode. Then press OK. 2. Select one of the options to enable or disable the fax
mode. 3. Press OK to save the settings. 4. To turn off the PC fax data sending/receiving mode, press
END. You can also restart the FWT to restore to the voice mode
ETS2000 Series (without the SMS function)
1. Press SET/STORE to enter the menu selection.
2. Use the left or right navigation key to select . 3. Press SET/STORE to enter the status configuration. 4. Select one of the options to enable or disable the fax
mode.
7
Product Steps 5. Press SET/STORE to save the settings. 6. To turn off the PC fax data sending/receiving mode, press
END. You can also restart the FWT to restore to the voice mode.
ETS1000 Series
1. Enter the operation code ##32* through the phone connected to the FWT (when you hear the dialing tone after picking up the handset). After a beep sound is played, the FWT is set to the fax mode.
2. To exit the fax mode, enter the operation code ##30* through the phone connected to the FWT (when you hear the dialing tone after picking up the handset). You can also restart the FWT to restore to the voice mode.
3. After the FWT sends or receives a PC fax, enter the operation code ##90000* through the phone connected to the FWT (when you hear the dialing tone after picking up the handset to end the PC fax operation).
8
3 cautions and
Precautions
PreTroubleshooting
provider.
ord vary with networks. For details, consult your service
To access the Internet, you need to subscribe to the data service with your service
The username and the passwprovider.
While accessing the Internet, the line is in use. Thus, the voice service is unavailable. Before making a phone call, you need to disconnect the dial-up connection.
Troubleshooting At dia t the Modem does not respond.
nstalled.
r the dial-up
Ma xits, contact
prompt indithe access number of the high-speed
your service provider.
3. your service provider that you have subscribed to the data service.
1. Make sure that the USB cable is well connected. 2. Make sure that the data rate of both the PC fax software and the FWT is set to
19200 bit/s. 3. Make sure that the FWT is set to the fax mode. If you have any queries, consult your
service provider.
l-up, a prompt indicates tha1. Make sure that the FWT is powered on and the USB cable is well connected. 2. Make sure that the driver is properly i3. Make sure that the baud rate of the Modem serial port is set to the default value
230400 bit/s. Then restart the FWT.
A prompt indicates that the dial-up cannot be created ois not connected to the server.
ke sure that the username and password are correct. If the problem still eyour service provider.
A cates that the server does not respond. 1. Make sure that the number is correct, such as,
packet data service is "#777". For details, consult 2. It is possible that the server is busy. Try later.
Confirm with
You cannot send or receive a PC fax.
Version: V200R002_01, PTCL