Huawei Embedded Power Supply Catalogue
Transcript of Huawei Embedded Power Supply Catalogue
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page i
Huawei Embedded Power Supply Catalogue
Huawei Energy Powering the Future
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page ii
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page iii
With the concept of high efficiency, energy saving and the green future, Huawei Network Energy, based on the deep
understanding of telecom power and customers‘ demands for years, aims at providing the leading embedded power
solution for our customers. Embedded power products cover BMP, open-frame power, cassette power system, server
power and so on, whose output power is from 10W to 3kW. Now these power supplies provide service for more than
150 countries all over the world with Huawei main devices. Huawei Network Energy owes the leading research team,8
power R&D centers around the world, and the capability to serve the customers throughout the world at anytime and
anywhere. Huawei Network Energy dedicates to bring the maximum benefits and business success for our customers
continuously.
This manual introduces the main features and parameters of the BMP, POL, server power supply and communication
custom power. We hope that the manual can help our customers to choose the optimum power solution. The detail
features of the product would be specified in the datasheet.
High Efficiency
Huawei embedded power products are characterized with high efficiency and high power density, and they are advanced
in the power supply industry. With the products, customer competitiveness improves and operating costs of end-users
decrease.
High Reliability
Based on high reliable design, high quality materials control, strict manufacture control and perfect life cycle management,
we produce the products with high reliability. With the perfect telecom power reliability test criterion and environmental
devices, Huawei embedded power along with the main device products serve 70% of the population all around the world,
covering more than 150 countries. The failure rate is lower than average standard in the industry.
High Flexibility
Huawei Network Energy provides all series embedded power systems, and responds quickly to the customized demands.
Huawei embedded power products can meet various requirements by their modular combination, which make customers'
power development easier and faster, and significantly cut the cost of power system design.
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 4
Contents1RELIABILITY, SAFETY AND EMC
2PART NUMBERING DESCRIPTION
Standard Brick Series .............................................................................................................. 4
GAS sixteenth-brick series .......................................................................................................... 4
GAE eighth-brick series .............................................................................................................. 6
GDE digital eighth-brick series .................................................................................................... 8
GAQ quarter-brick series .......................................................................................................... 10
GDQ digital quarter-brick series ................................................................................................ 12
GAH half-brick series ............................................................................................................... 14
Nonstandard Brick Series .......................................................................................................16
GAC 15W single output series ................................................................................................... 16
GAC 25W single output series ................................................................................................... 18
GAC 15W dual outputs series ................................................................................................... 20
GAE dual outputs series ........................................................................................................... 22
GAQ dual outputs series ........................................................................................................... 24
GAQ 24V output series ............................................................................................................. 26
RAG ring generator series ......................................................................................................... 28
4BMP SERIES
NAK 20A output series ............................................................................................................. 30
NAJ 40A output series .............................................................................................................. 32
NAD 3D POL series .................................................................................................................. 34
NAS vertical SMT package series ............................................................................................... 37
NAP SIP series ......................................................................................................................... 39
30POL SERIES
PAC440D5412-ON power module ............................................................................................. 46
PAC500D5412-CE power module .............................................................................................. 48
PAC1000D5403-CN power module ............................................................................................ 50
PAC2700S54-CB power module ................................................................................................. 52
PAC1600T5453-CB power module ............................................................................................. 54
PAC320D2805-CN power module .............................................................................................. 56
PAC600S12-CE/CB power module .............................................................................................. 58
46COMMUNICATION CUSTOM POWER SERIES
Blade server power supply series ............................................................................................... 42
Rack server power supply series ................................................................................................ 44
42SERVER POWER SERIES
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 1
RELIABILITY, SAFETY AND EMC
Reliability, Safety and EMC
Reliability Verification
In order to guarantee the high reliability of power supply products in the whole life cycle, Huawei have carried out strict reliability
verification and screening activities from materials, design to production.
Safety and EMC
IEC/EN/UL60950-1 second edition
UL and TUV/CE certification
EN55022, EN55024, EN300386, GB9254, GB17626 (an external filtering circuit required)
All non metal material to meet the corresponding flame retardant grade
Item Standard Conditions Time Quantity
HALT IPC9592Lower operating Limit: -60°C(-76°F); Upper operating Limit: 110°C(248°F); Destruct Limit: 40G
48 H 4 PCS
Power and Temperature Cycling Test
IPC9592-40 - 85°C; 50% - 80% load, Air Flow: 1 - 2m/s; Temperature Slope: 10 - 15°C/min
1000 H 8 - 16 PCS
High Temperature Operation Life
IPC9592 50 ±5°C; 50% - 80% load; air flow: 0.5 - 5m/s 1000 H 16 PCS
Temperature Humidity Bias IPC9592 85°C; 85%RH 1000 H 16 PCS
Dust Test* GB/T 2423.4 24H Hygroscopic Dust; 48H Humidity and Thermal 72 H 3 PCS
Exposure Test* GBT14165-2008 Field Testing in HaiNan and ChongQing 1 Year 24 PCS
Airborne Contaminants Test*GR-63(Extension test time)
Outdoor 30°C; 70%RH; 20ppb Cl2, 100ppb H2S 200ppb NO2, 200ppb SO2
1000 H 110 PCS
Sulfuration Corrosion Test* GB/T 2423.20 60°C; 70%RH; 100PPM H2S 200 H 3200 PCS
High Temperature Operating Life Screening Test
IPC9592Thermal Spot Temperature: 90 - 100°C; Rating Input Voltage; 50% - 80% Load; Ambient Temperature: 40 - 60°C, Air Flow: 0.5 - 5m/s
24H - 12H - 8H - 4H
All Power Model Products
Ongoing Reliability Auditing Test
IPC9592Thermal Spot 90 - 100°C; Rating Input Voltage; 50% - 80% Load; Ambient Temperature 40 - 60°C; Air Flow: 0.5 - 5m/s
336 H≥48PCS in the life cycle
Temperature Cycling Auditing Test*
IPC9592Ambient Temperature: -40 - 55°C; Rating Input Voltage, 50% Load; Air Flow: 1.0-2.0m/s; 5 cycles; Temperature Slope: 15°C/min
10 H8 - 16PCS/per task
* The test items with asterisk are optional in the design and production process according to product applications and customers’ requirements.
1
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 2
PART NUMBERINGDESCRIPTION
BMP Series
Part Numbering Description
e.g. GDQ33S12B-PIsolated digital quarter-brick module with baseplate, rating output 12V/33A, compatible with the PMBus1.1 communication
protocol.
e.g. GAQ100D1233Isolated analog quarter-brick module without baseplate, rating outputs 12V and 3.3V, total rating output power 100W.
Special instructions for RAG 40 S 75 P:
Ring generator, Po 40W, rating output 75Vac, positive logic
GAQ xxx S xxx B -XXP
Main Series
e.g.
50: 50W
100: 100W
D: dual outputs Two digits represents
a positive and
negative voltage.
e.g.
D12: ±12V
Four digits
represents two
different voltages,
the higher in the
front, and the
lower behind.
e.g.
1212: 12V and 1.2V
First letter
G: 48Vin series
Second letter
A: analog module
B: analog upgrade
products
D: digital module
Third letter
H: half-brick
Q: quarter-brick
E: eighth-brick
S: sixteenth-brick
C: nonstandard-
Brick
e.g.
0A5: 0.5A
05: 5A
100: 100A
S: single output e.g.
0V9: 0.9V
3V3: 3.3V
05: 5V
B: baseplate,omit
this letter for no
baseplate.
P: positive logic,
omit this letter for
negative logic.
One digit and one
letter
One digit: pin
length, omit
this number for
3.8mm.
4:4.8mm
One letter: omit
this letter for no
meaning, “P” in
digital module for
PMBus interface.
Output Current
Output Power
Outputs
Outputs
Output Voltage
Output Voltage
Baseplate ON/OFF Logic Expand Code
2
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 3
PART NUMBERINGDESCRIPTION
POL Series
e.g. NAJ12S40-AAnalog POL module without baseplate, rating input voltage is 12V, single output, rating output current 40A.
NAJ XX S XXX B -XX
First letter
N: non-isolated series
Second letter
A: analog module
D: digital module
Third letter
K: 24×13.5×12mm
package
J: 28×24×12mm
package
P: SIP series
S: vertical SMT
package
D: 3D architecture
e.g.
03: 3.3V
05: 5V
12: 12V
S: single output
D: dual outputs
e.g.
0A5: 0.5A
05: 5A
50: 50A
B: baseplate, omit
this letter for no
baseplate.
One to two digits
or letters, reflecting
the small differences
between products in
same platform, omit
for no meaning.
Main Series Input Voltage Outputs Output Current Baseplate Expand Code
e.g. PAC2700S12-CBCassette AC-DC power supply, output power 2700W, output voltage 12V, front-to-back airflow
Server Power and Communication Custom Series
PAC XXXX S XXXX —X X
Main Series Output Power
First letter
P: embedded power
Last two letters
AC: AC input
DC: DC input
e.g.
50: 50W
100: 100W
S: single output e.g.
0V9: 0.9V
3V3: 3.3V
05: 5V
D: dual outputs
T: triple outputs
Two digits represents
a positive and
negative voltage.
e.g.
D12: ±12V
Four digits represents
two different voltages,
the higher in the
front, and the lower
behind.
e.g.
5312: 53.5V and 12V
Triple outputs, choose
the two main outputs
only in the description
O: open frame
C: cassette
B: front-to-back
airflow
E: back-to-front
airflow
N: Air cooling
Outputs
Outputs
Output Voltage
Output Voltage
Structure Heat Dissipation
3
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 4
Standard Brick Series
BMP SERIES
Features
• Input under voltage protection • Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • Remote on/off control • Remote sense * • Output voltage Trim *
*GAS08S12B without this function
GAS Sixteenth-Brick Series
Introduction
The GAS series DC-DC converter is high-efficiency and power density standard 1/16 brick isolated module, the output power from 30W to 90W, the output voltage covering 1.2V, 3.3V and 12V three levels. All models support primary ON/OFF control, the 1.2V and 3.3V output models have the functions of remote Sense and Trim. This series which conform to the RoHS6 requirement can be used in the fields of communication, data transmission and distributed power supply system.
Specification
Model Parameter Notes & Conditions
Output characteristics
Output line regulation ALL 0.2%Vo Vin=36 - 75V, Imax
Output load regulation ALL 0.2%Vo Vin=48V, Iout=0 - Imax
Regulated voltage ALL 3%Vo The whole range of Vin, Iout and TA
Output ripple and noise (PK-PK)GBS25S1V2, GAS35S1V2B 100mV
Oscilloscope bandwidth: 20 MHzOTHER 200mV
Output voltage adjustment range (trim)
GAS08S12B NA Without TRIM function
OTHER 80% - 110% -
Input characteristics
Operating input voltage ALL 36 - 75V -
Maximum input currentGBS25S1V2, GAS35S1V2B, GBS15S3V3, GBS04S12
2AVin=36V, Iout=Imax
GAS25S3V3B, GAS08S12B 3.5A
Input reflected ripple current (PK-PK)
GBS25S1V2 20mA
Oscilloscope bandwidth: 20 MHzGBS35S1V2B, GBS04S12 30mA
GAS15S3V3, GAS25S3V3B 51mA
GAS08S12B 25mA
Protection characteristics
Input UVP ALLTurn on: 31 - 36VTurn off: 30 - 35V
Hysteresis: 1 - 3V
Output OVP
GBS25S1V2, GBS15S3V3, GBS04S12
120% - 150%
HiccupGAS35S1V2B 115% - 167%
GAS25S3V3B 115% - 150%
GAS08S12B 115% - 135%
Over current Protection
GBS25S1V2, GBS15S3V3, GBS04S12
110% - 160%
HiccupGAS08S12B 110% - 180%
OTHER 110% - 150%
Over temperature Protection
GBS15S3V3 100 - 130°CConverter will reset when over temperature condition is removedHysteresis: 10°C
GAS35S1V2B 110 - 130°C
OTHER 105 - 125°C
Absolute maximum ratings
Input voltage ContinuousTransient (100 ms)
ALL -80V
100V
Operating ambient temperature ALL -40 - 85°C -
Storage temperature ALL -55 - 125°C -
Other characteristics
Remote on/off voltage Low levelHigh level
ALL Negative logic-0.7 - 1.2V
3.5 - 12V
Input-to-output Isolation voltage ALL 1500VDC Basic isolation
Mean time between failures (MTBF)
ALL 1.5 million hoursTelcordia SR332, 80% load, 300LFM, TA=40°C
4
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 5
Standard Brick Series
BMP SERIES
Model Selector
Model Input Voltage Output Voltage Output Current Output Power Efficiency
GBS25S1V2 36 - 75V 1.2V 25A 30W 88.0%
GAS35S1V2B 36 - 75V 1.2V 35A 42W 85.5%
GBS15S3V3 36 - 75V 3.3V 15A 50W 91.0%
GAS25S3V3B 36 - 75V 3.3V 25A 82.5W 91.0%
GBS04S12 36 - 75V 12V 4.2A 50W 91.5%
GAS08S12B 36 - 75V 12V 7.5A 90W 93.0%
Pin No. Function Pin No. Function
1 Vin(+) 5 Sense(-)
2 ON/OFF 6 Trim
3 Vin(-) 7 Sense(+)
4 Vout(-) 8 Vout(+)
Pin Description
TolerancesDimensions: X.X±0.5mm[X.XX±0.02 in.] X.XX±0.25mm[X.XXX±0.010 in.]Pin: X.XX±0.10mm[X.XXX±0.004 in.]
* GAS08S12B without PIN5, PIN6 and PIN7
Bottom View
33.9[1.33]
27.94[1.100]
7.6
2[0
.30
0]
23
.1[0
.91
]
15
.24
[0.6
00
]
3
2
1
4
5
6
7
8
Top View
33.9[1.33]
23
.7[0
.93
]
Side ViewSide View
3.8
0[0
.15
0]
10
.0[0
.39
]
2-Φ1.50[0.060]
2-Φ2.50[0.100]
5-Φ1.00[0.040]
5-Φ2.00[0.080]
3.8
0[0
.15
0]
12
.7[0
.50
]
Mechanical Diagram
Unit: mm [in.]
5
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 6
Standard Brick Series
BMP SERIES
Features
• Input under voltage protection • Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • Remote on/off control • Remote sense • Output voltage Trim
GAE Eighth-Brick Series
Introduction
The GAE series DC-DC converter is high-efficiency and power density standard 1/8 brick isolated module. This series contain 9 modules, output power from 25W to 180W, output voltage covering 3.3V, 5V and 12V three levels. All models support primary ON/OFF control, remote sense and Trim function. This series which conform to the RoHS6 requirement can be used in the fields of communication, data transmission and distributed power supply system.
Model Parameter Notes & ConditionsOutput characteristics
Output line regulation
GAE08S3V3, GAE15S3V3, GAE30S3V3
0.1%Vo
Vin=36 - 75V, ImaxGAE10S05, GBE04S12, GAE08S12, GAE08S12B
0.2%Vo
GAE15S12, GAE15S12B 0.3%Vo
Output load regulationGAE10S05 0.5%Vo
Vin=48V, Iout=0 - ImaxGAE15S12, GAE15S12B 0.3%VoOTHER 0.2%Vo
Regulated voltageGAE10S05 2%Vo
The whole range of Vin, Iout and TAOTHER 3%Vo
Output ripple and noise (PK-PK)
GAE08S3V3, GAE10S05, GAE08S12, GAE08S12B, GAE15S12, GAE15S12B
50mVOscilloscope bandwidth: 20 MHz
GAE15S3V3, GAE30S3V3, GBE04S12
100mV
Output voltage adjustment range (trim)
ALL 80% - 110% -
Input characteristicsOperating input voltage ALL 36 - 75V -
Maximum input current
GAE08S3V3 1.5A Vin=36V, Iout=7.6AGAE15S3V3 1.8A Vin=36V, Iout=15AGAE30S3V3 3.7A Vin=36V, Iout=30AGAE10S05 2.5A Vin=36V, Iout=10AGBE04S12 2.0A Vin=36V, Iout=4AGAE08S12, GAE08S12B 3.4A Vin=36V, lout=8AGAE15S12, GAE15S12B 8A Vin=36V, lout=15A
Input reflected ripple current (PK-PK)
GAE08S3V3 5.6mA
Oscilloscope bandwidth: 20 MHz
GAE15S3V3, GAE08S12, GAE08S12B
20mA
GAE30S3V3 30mAGAE10S05 14mAGAE15S12, GAE15S12B 50mA
Protection characteristics
Input UVP ALLTurn on: 31 - 36VTurn off: 30 - 35V
Hysteresis: 1 - 3V
Output OVP ALL 120% - 150% HiccupOver current Protection ALL 105% - 168% Hiccup
Over temperature Protection ALL 105 - 125°CConverter will reset when over temperature condition is removedHysteresis: 10°C
Absolute maximum ratings
Input voltage ContinuousTransient (100 ms)
ALL -80V100V
Operating ambient temperature ALL -40 - 85ºC -Storage temperature ALL -55 - 125ºC -Other characteristics
Remote on/off voltage Low levelHigh level
ALL Negative logic-0.7 - 1.2V3.5 - 12V
Input-to-output Isolation voltage ALL 1500VDC Basic isolationMean time between failures (MTBF)
ALL 1.5 million hoursTelcordia SR332, 80% load, 300LFM, TA=40ºC
Specification
6
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 7
Standard Brick Series
BMP SERIES
Model Input Voltage Output Voltage Output Current Output Power Efficiency
GAE08S3V3 36 - 75V 3.3V 7.6A 25W 90.0%
GAE15S3V3 36 - 75V 3.3V 15A 50W 92.0%
GAE30S3V3 36 - 75V 3.3V 30A 100W 94.0%
GAE10S05 36 - 75V 5V 10A 50W 92.5%
GBE04S12 36 - 75V 12V 4A 48W 91.5%
GAE08S12 36 - 75V 12V 8A 100W 94.0%
GAE08S12B 36 - 75V 12V 8A 100W 94.0%
GAE15S12 36 - 75V 12V 15A 180W 94.0%
GAE15S12B 36 - 75V 12V 15A 180W 94.0%
Model Selector
TolerancesDimensions: X.X±0.5mm[X.XX±0.02 in.] X.XX±0.25mm[X.XXX±0.010 in.]Pin: X.XX±0.10mm[X.XXX±0.004 in.]
Pin Description
Pin No. Function Pin No. Function
1 Vin(+) 5 Sense(-)
2 ON/OFF 6 Trim
3 Vin(-) 7 Sense(+)
4 Vout(-) 8 Vout(+)
Top View
50.80[2.000]
57.9[2.28]
7.6
2[0
.30
0]
15
.24
[0.6
00
]
22
.9[0
.90
]3 4
5678
2
1
Bottom View
Side View
3.8
0[0
.15
0]
12
.7[0
.50
]
6-Φ1.00[0.040]
6-Φ2.00[0.080]
2-Φ1.50[0.060]
2-Φ2.50[0.100]
Side View
3.8
0[0
.15
0]
9.7
[0.3
8]
6-Φ1.00[0.040]
6-Φ2.00[0.080]
2-Φ2.50[0.100]
2-Φ1.50[0.060]
Mechanical Diagram
Unit: mm [in.]
7
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 8
Standard Brick Series
BMP SERIES
GDE Digital Eighth-Brick Series
Introduction
The GDE series DC-DC converter is high-efficiency and power density 1/8 brick isolation module, rating output voltage 12V, output power 240W. This series provide the standard 1/8 brick version and the PMBus compatible version. The latter is compatible with the PMBus1.1 communication protocol, backward compatible with the I²C/SMBus protocol, and providing Pre-bias, output monitoring and current sharing functions. The GDE series conform to the RoHS6 requirement.
Features
• Input under voltage protection • Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • Primary on/off control • Secondary on/off control * • Output voltage digital Trim * • Input voltage monitoring * • Output voltage and current
monitoring * • Output power monitoring and
alarm * • Pre-bias function * • Dual modules current sharing *
*GDE20S12B without this function
Specification
Model Parameter Notes & Conditions
Output characteristics
Output voltage range ALL11.64 - 12.36V Iout=10A, Vin=40 - 75V
10.8 - 12.36V Iout=10A, Vin=36 - 40V, Vo changes with the Vin
Output line regulation ALL0.2%Vo Vin=40 - 75V, Iout=20A
10%Vo Vin=36 - 40V, Iout=20A
Output load regulation ALL 3%Vo The whole range of Vin, Iout and TA
Output ripple and noise (PK-PK) ALL 200mV Oscilloscope bandwidth: 20 MHz
Output voltage adjustment range (trim) GDE20S12B-P70% - 110% VIN=45 - 75V, Adjusted by PMBus
70% - 100% VIN=36 - 45V, Adjusted by PMBus
Input characteristics
Operating input voltage ALL 36 - 75V -
Maximum input current ALL 10A Vin=0 - 75V, Iout=20A
Input reflected ripple current (PK-PK) ALL 100mA Oscilloscope bandwidth: 20 MHz
Protection characteristics
Input UVP ALLTurn on: 31 - 35.5VTurn off: 30 - 35V
Hysteresis: 1 - 3V
Output OVP ALL 117% - 133% Hiccup
Over current Protection ALL 110% - 140% Hiccup
Over temperature Protection ALL 110 -130ºCConverter will reset when over temperature condition is removedHysteresis: 10ºC
Absolute maximum ratings
Input voltageContinuousTransient (100 ms)
ALL -80V
100V
Operating ambient temperature ALL -40 - 85ºC -
Storage temperature ALL -55 - 125ºC -
Other characteristics
Primary remote controlLow levelHigh level
ALL Negative logic-0.7 - 1.2V
2.8 - 8V
secondary remote controlLow levelHigh level
GDE20S12B-P Positive logic0 - 0.8V
2.1 - 3.3V
Input-to-output Isolation voltage ALL 1500VDC -
Mean time between failures (MTBF) ALL 1.5 million hours Telcordia SR332, 80% load, 300LFM, TA=40ºC
PMBus measurement accuracy
Input voltage measurement accuracy GDE20S12B-P ±1V
Vin=36 - 75V, Iout=0 - 20A, TA=-40 - 85ºCOutput voltage measurement accuracy GDE20S12B-P ±0.2V
Output current measurement accuracy GDE20S12B-P ±1A
Temperature measurement accuracy GDE20S12B-P ±5ºC Vin=36 - 75V, Iout=0 - 20A, TA=-40 - 125ºC
8
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 9
Standard Brick Series
BMP SERIES
Model Input Voltage Output Voltage Output Current Output Power Efficiency PMBus Compatibility
GDE20S12B-P 36 - 75V 12V 20A 240W 95.0% Y
GDE20S12B 36 - 75V 12V 20A 240W 95.0% N
Model Selector
Pin No. Function Pin No. Function
1 Vin(+) 8 PMBus_ALT
2 ON/OFF 9 SA1
3 Vin(-) 10 PMBus_CTL
4 Vout(-) 11 ISHARE
5 Vout(+) 12 PMBus_SCL
6 SGND 13 PMBus_SDA
7 SAO
Pin Description
TolerancesDimensions: X.X±0.5mm[X.XX±0.02 in.] X.XX±0.25mm[X.XXX±0.010 in.]Pin1 to Pin5: X.XX±0.10mm[X.XXX±0.004 in.]Pin6 to Pin13: 0.64±0.05mm[0.025±0.002 in.]
* GDE20S12B without PMBUS interface
Mechanical Diagram
Unit: mm [in.]
Top View
57.9[2.28]
Side View
2-Φ1.50[0.060]
2-Φ2.50[0.100]
3-Φ2.00[0.080]
3-Φ1.00[0.040]
12
.7[0
.50
]
3.8
0[0
.15
0]
Bottom View
53.34[2.100]
2.54[0.100]
50.80[2.000]
55.02[2.166]PMBUS Interface
22
.9[0
.90
]
15
.24
[0.6
00
]
2.5
4[0
.10
0]
3X
2.5
4(=
7.6
2[0
.30
0])
3.8
1[0
.15
0]
15
.24
[0.6
00
]
3
2
1
4
6
8
10
12
7
9
11
13
5
9
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 10
Standard Brick Series
BMP SERIES
GAQ Quarter-Brick Series
Introduction
The GAQ series DC-DC converter is high-efficiency and power density standard 1/4 brick isolated module. This series contain 18 modules, the output power from 36W to 450W, the output voltage covering 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5V, 12V, 53.5V and 96V nine levels. All modules support primary ON/OFF control, remote Sense and Trim function. This series which conform to the RoHS6 requirement can be used in the fields of communication, data transmission and distributed power supply system.
Features
• Input under voltage protection • Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • Remote on/off control • Remote sense * • Output voltage Trim *
*GBQ18S12 without this function
Specification
Model Parameter Notes & ConditionsOutput characteristics
Output line regulationGBQ10S12, GBQ10S12B, GBQ18S12, GAQ01S96B
1%VoVin=36 - 75V, Imax
OTHER 0.2%Vo
Output load regulation
GAQ40S1V8, GAQ25S12B, GAQ02S54B 0.5%Vo
Vin=48V, Iout=0 - ImaxGBQ10S12, GBQ10S12B, GBQ18S12, GAQ01S96B
1%Vo
OTHER 0.3%Vo
Regulated voltage GAQ02S54B 1.5%Vo
The whole range of Vin, Iout and TAOTHER 3%Vo
Output ripple and noise (PK-PK)
GAQ30S1V2, GAQ60S1V2, GAQ40S1V5, GAQ40S1V8, GAQ10S12, GBQ18S12, GAQ25S3V3B, GBQ10S12
50mV
Oscilloscope bandwidth: 20 MHzGAQ40S3V3, GAQ40S3V3B, GAQ25S12B 80mVGAQ40S2V5, GAQ02S54B, GBQ20S05B, GAQ37S12B
100mV
GAQ20S05, GBQ10S12B 120mVGAQ01S96B 2000mV
Output voltage adjustment range (trim)
GAQ25S12B, GAQ37S12B 90% - 110%
-GAQ02S54B 67% - 106%GAQ01S96B 90% - 105%OTHER 80% - 110%
Input characteristicsOperating input voltage ALL 36 - 75V -
Maximum input current
GAQ30S1V2 1.3A Vin=36V, Iout=30AGAQ60S1V2 2.8A Vin=36V, Iout=60AGAQ40S1V5 2A Vin=36V, Iout=40AGAQ40S1V8 2.4A Vin=36V, Iout=40AGAQ40S2V5 3.5A Vin=36V, Iout=40AGAQ25S3V3B 3.2A Vin=36V, Iout=25AGAQ40S3V3/GAQ40S3V3B 4.05A Vin=36V, Iout=40AGAQ20S05 3.4A Vin=36V, Iout=20AGAQ10S12, GAQ01S96B 4A Vin=36V, ImaxGBQ20S05, GBQ10S12, GBQ10S12B 5A Vin=36V, ImaxGBQ18S12 8A Vin=36V, Iout=18AGAQ25S12B 10A Vin=36V, Iout=25AGAQ37S12B 16A Vin=36V, Iout=37AGAQ02S54B 3.5A Vin=36V, Iout=1.5A
Input reflected ripple current (PK-PK)
GAQ02S54B 26mA
Oscilloscope bandwidth: 20 MHzGBQ10S12, GBQ10S12B 50mAGAQ01S96B 30AOTHER 20mA
Protection characteristics
Input UVP ALLTurn on: 31 - 36VTurn off: 30 - 35V
Hysteresis: 1 - 3V
Output OVP ALL 120% - 150% HiccupOver current Protection ALL 110% - 150% Hiccup
Over temperature Protection ALL 100 - 130ºCConverter will reset when over temperature condition is removedHysteresis: 10ºC
Absolute maximum ratingsInput voltage ContinuousTransient (100 ms)
ALL -80V100V
Operating ambient temperature ALL -40 - 85ºC -Storage temperature ALL -55 - 125ºC -Other characteristicsRemote on/off voltageLow levelHigh level
ALL Negative logic-0.7 - 1.2V3.5 - 12V
Input-to-output Isolation voltageGAQ25S12B
1500VDCFunctional isolation
OTHER Basic isolationMean time between failures (MTBF)
ALL 1.5 million hoursTelcordia SR332, 80% load, 300LFM, TA=40ºC
10
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 11
Standard Brick Series
BMP SERIES
Model Input Voltage Output Voltage Output Current Output Power EfficiencyGAQ30S1V2 36 - 75V 1.2V 30A 36W 89.5%GAQ60S1V2 36 - 75V 1.2V 60A 72W 89.0%GAQ40S1V5 36 - 75V 1.5V 40A 60W 90.5%GAQ40S1V8 36 - 75V 1.8V 40A 72W 91.5%GAQ40S2V5 36 - 75V 2.5V 40A 100W 92.0%GAQ25S3V3B 36 - 75V 3.3V 25A 82.5W 93.5%GAQ40S3V3 36 - 75V 3.3V 40A 132W 93.5%GAQ40S3V3B 36 - 75V 3.3V 40A 132W 93.5%
GAQ20S05 36 - 75V 5V 20A 100W 93.5%GBQ20S05B 36 - 75V 5V 20A 100W 92.5%GAQ10S12 36 - 75V 12V 10A 120W 94.0%GBQ10S12 36 - 75V 12V 10A 120W 92.0%GBQ10S12B 36 - 75V 12V 10A 120W 92.0%GBQ18S12 36 - 75V 12V 18A 216W 93.0%
GAQ25S12B 36 - 75V 12V 25A 300W 95.0%GAQ37S12B 36 - 75V 12V 37A 450W 95.5%GAQ02S54B 36 - 75V 53.5V 1.5A 80W 92.5%GAQ01S96B 36 - 75V 96V 1A 96W 87.0%
Model Selector
TolerancesDimensions: X.X±0.5mm[X.XX±0.02 in.] X.XX±0.25mm[X.XXX±0.010 in.]Pin: X.XX±0.10mm[X.XXX±0.004 in.]
GBQ18S12 without PIN5, PIN6 and PIN7
Pin No. Function Pin No. Function1 Vin(+) 5 Sense(-)2 ON/OFF 6 Trim3 Vin(-) 7 Sense(+)4 Vout(-) 8 Vout(+)
Pin Description
Top View
54.00[2.126]
47.24[1.860] 4-M2[0.1]
M3[0.1]
26
.16
[1.0
30
]
33
.00
[1.2
99
]
Bottom View
57.9[2.28]
50.80[2.000]
7.6
0[0
.29
9]
15
.24
[0.6
00
]
36
.8[1
.45
]
15
.24
[0.6
00
] 3 45678
2
1
Side View
6-Φ2.00[0.080]
12
.7[0
.50
]3
.80
[0.1
50
]
2-Φ2.50[0.100]
6-Φ1.00[0.040] 2-Φ1.50[0.060]
Side View
10
.0 [
0.4
0]
3.8
0 [0
.15
0]
6-Φ2.00[0.080]
6-Φ1.00[0.040]
2-Φ2.50[0.100]
2-Φ1.50[0.060]
Mechanical Diagram
Unit: mm [in.]
11
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 12
Standard Brick Series
BMP SERIES
Features
• Input under voltage protection • Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • Primary on/off control • Secondary on/off control • Output voltage digital Trim * • Input voltage monitoring * • Output voltage and current
monitoring * • Output power monitoring and
alarm * • Pre-bias function * • Dual modules current sharing *
* GDQ33S12&GDQ54S12B without this
function
GDQ Digital Quarter-Brick Series
Introduction
The GDQ series DC-DC converter is high-efficiency and power density 1/4 brick isolation module, rating output voltage 12V. This series provide the standard 1/4 brick version and the PMBus compatible version. The latter is compatible with the PMBus1.1 communication protocol, backward compatible with the I²C/SMBus protocol, and providing Pre-bias, output monitoring and current sharing functions. The GDQ series conform to the RoHS6 requirement.
Specification
Model Parameter Notes & ConditionsOutput characteristics
Output voltage rangeGDQ54S12B 11.82 - 12.18V Iout=27A; Vin=48V
OTHER11.64 - 12.36V Iout=16.5A, Vin=40 - 75V10.8 - 12.36V Iout=16.5A, Vin=36 - 40V, Vo changes with the Vin
Output line regulationGDQ54S12B 0.3%Vo Vin=40 - 60V, Iout=54A
OTHER0.2%Vo Vin=40 - 75V, Iout=33A10%Vo Vin=36 - 40V, Iout=33A
Output load regulationGDQ54S12B 5%Vo
The whole range of Vin, Iout and TAOTHER 0.3%Vo
Output ripple and noise (PK-PK) ALL 200mV Oscilloscope bandwidth: 20 MHz
Output voltage adjustment range (trim) GDQ33S12B-P 70% - 110% VIN=45 - 75V, Adjusted by PMBus70% - 100% VIN=36 - 45V, Adjusted by PMBus
Input characteristics
Operating input voltageGDQ54S12B 40 - 60V
-OTHER 36 - 75V
Maximum input currentGDQ54S12B 20A Vin=0 - 60V, Iout=54A OTHER 14A Vin=0 - 75V, Iout=33A
Input reflected ripple current (PK-PK)GDQ54S12B 100mA
Oscilloscope bandwidth: 20 MHzOTHER 200mA
Protection characteristics
Input UVPGDQ54S12B
Turn on: 35 - 39VTurn off: 33 - 37V
Hysteresis: 1 - 3V
OTHERTurn on: 31 - 35.5VTurn off: 30 - 35V
Hysteresis: 1 - 3V
Output OVPGDQ54S12B 115% - 40%
HiccupOTHER 117% - 133%
Over current ProtectionGDQ54S12B 110% - 140%
HiccupOTHER 110% - 127%
Over temperature Protection ALL 110 -130ºCConverter will reset when over temperature condition is removedHysteresis: 10ºC
Absolute maximum ratings
Input voltageContinuousTransient (100 ms)
GDQ54S12B -62V70V
OTHER -80V100V
Operating ambient temperature ALL -40 - 85ºC -Storage temperature ALL -55 - 125ºC -Other characteristics
Primary remote controlLow levelHigh level
GDQ54S12B
Negative logic
-0.7 - 1.2V3.5 - 12V
OTHER -0.7 - 1.2V2.8 - 8V
secondary remote controlLow levelHigh level
GDQ33S12B-P Positive logic0 - 0.8V2.1 - 3.3V
Input-to-output Isolation voltage ALL 1500VDC -Mean time between failures (MTBF) ALL 1.5 million hours Telcordia SR332, 80% load, 300LFM, TA=40ºCPMBus measurement accuracyInput voltage measurement accuracy GDQ33S12B-P ±1V
Vin=36 - 75V, Iout=0 - 33A, TA=-40ºC - 85ºCOutput voltage measurement accuracy GDQ33S12B-P ±0.2VOutput current measurement accuracy GDQ33S12B-P ±1AOutput power measurement accuracy GDQ33S12B-P ±12.56WTemperature measurement accuracy GDQ33S12B-P ±5ºC Vin=36 - 75V, Iout=0 - 33A, TA=-40ºC - 125ºC
12
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 13
Standard Brick Series
BMP SERIES
Model Input Voltage Output Voltage Output Current Output Power Efficiency PMBus Compatibility
GDQ33S12B-P 36 - 75V 12V 33A 400W 96.0% Y
GDQ33S12B 36 - 75V 12V 33A 400W 96.0% N
GDQ54S12B 40V - 60V 12V 54A 650W 96.0% N
Model Selector
Pin No. Function Pin No. Function
1 Vin(+) 8 PMBus_ALT
2 ON/OFF 9 SA1
3 Vin(-) 10 PMBus_CTL
4 Vout(-) 11 ISHARE
5 Vout(+) 12 PMBus_SCL
6 SGND 13 PMBus_SDA
7 SAO
TolerancesDimensions: X.X±0.5mm[X.XX±0.02 in.] X.XX±0.25mm[X.XXX±0.010 in.]Pin1 to Pin5: X.XX±0.10mm[X.XXX±0.004 in.]Pin6 to Pin13: 0.64±0.05mm[0.025±0.002 in.]
* GDQ33S12B and GDQ54S12B without PMBUS interface
Pin Description
57.9[2.28]
15
.24
[0.6
00
]
50.80[2.000]
3
6
8
10
12
7
9
11
13
2
1
4
5
2.54[0.100]
36
.8[1
.45
]
15
.24
[0.6
00
]
3.8
1[0
.15
0]
3X
2.5
4(=
7.6
2[0
.30
0])
2.5
4[0
.10
0]
PMBUS Connector
Bottom ViewTop View
3-M2.00[0.080]
4-M3.00[0.120]
47.24[1.860]
26
.16
[1.0
30
]
33
.00
[1.2
99
]
54.00[2.126]
Side View
3-Φ2.00[0.080]
3-Φ1.00[0.040]
2-Φ2.50[0.100]
2-Φ1.50[0.060]
3.8
0[0
.15
0]
12
.7[0
.50
]
Mechanical Diagram
Unit: mm [in.]
13
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 14
Standard Brick Series
BMP SERIES
Features
• Input under voltage protection • Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • Remote on/off control • Remote sense • Output voltage Trim
GAH Half-Brick Series
Introduction
The GAH series DC-DC converter is high-efficiency and power density standard 1/2 brick isolated module. This series contain 8 modules, output power from 100W to 450W, output voltage covering 3.3V,5V,12V and 48V four levels. All modules support primary ON/OFF control, remote Sense and Trim function. This series which conform to the RoHS6 requirement can be used in the fields of communication, data transmission and distributed power supply system.
Specification
Model Parameter Notes & ConditionsOutput characteristicsOutput line regulation ALL 0.3%Vo Vin=36 - 75V, Imax
Output load regulation
GAH30S3V3B, GAH60S3V3B, GAH30S05B, GAH12S28B, GAH16S28B
0.3%VoVin=48V, Iout=0 - Imax
GAH10S12B, GAH30S12B, GAH03S48BP
0.5%Vo
Regulated voltage GAH30S3V3B, GAH60S3V3B 1.5%Vo
The whole range of Vin, Iout and TAOTHER 3%Vo
Output ripple and noise (PK-PK)
GAH30S3V3B, GAH60S3V3B, GAH03S48BP, GAH30S12B
150mVOscilloscope bandwidth: 20 MHz
GAH30S05B, GAH10S12B, GAH12S28B, GAH16S28B
100mV
Output voltage adjustment range (trim)
GAH30S3V3B, GAH60S3V3B 80% - 110%
-GAH12S28B 60% - 110%GAH16S28B 60% - 118%OTHER 90% - 110%
Input characteristics
Operating input voltageGAH16S28B 36 - 60V -OTHER 36 - 75V -
Maximum input current
GAH30S3V3B 4A Vin=36V, Iout=30AGAH60S3V3B 7.5A Vin=36V, Iout=60AGAH30S05B 5.5A Vin=36V, Iout=30AGAH10S12B 5A Vin=36V, Iout=10AGAH30S12B 11A Vin=36V, Iout=30AGAH03S48BP 5.5A Vin=36V, Iout=3.2AGAH12S28B 15A Vin=36V, Iout=12.5AGAH16S28B 16A Vin=36V, Iout=16A
Input reflected ripple current (PK-PK)
GAH30S3V3B 15mA
Oscilloscope bandwidth: 20 MHz
GAH60S3V3B 20mAGAH30S05B 66mAGAH10S12B 17mAGAH30S12B 25mAGAH03S48BP 50mAGAH12S28B 150mAGAH16S28B 600mA
Protection characteristics
Input UVP ALLTurn on: 31 - 36VTurn off: 30 - 35V
Hysteresis: 1 - 3V
Output OVP ALL 120% - 150% Hiccup
Over current ProtectionGAH10S12B, GAH03S48BP, GAH12S28B
120% - 180%Hiccup
OTHER 110% - 150%
Over temperature ProtectionGAH10S12B, GAH30S12B 120 - 130ºC Converter will reset when over
temperature condition is removedHysteresis: 10ºCOTHER 100 - 130ºC
Absolute maximum ratings
Input voltageContinuousTransient (100 ms)
GAH16S28B -65V80V
OTHER -80V100V
Operating ambient temperature ALL -40 - 85ºC -Storage temperature ALL -55 - 125ºC -Other characteristics
Remote on/off voltageLow levelHigh level
GAH03S48BP-0.7 - 1.2V
Positive logic3.5 - 12V
OTHER-0.7 - 1.2V
Negative logic3.6 - 12V
Input-to-output Isolation voltage ALL 1500VDC Basic isolationMean time between failures (MTBF)
ALL 1.5 million hoursTelcordia SR332, 80% load, 300LFM, TA=40ºC
14
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 15
Standard Brick Series
BMP SERIES
Model Input Voltage Output Voltage Output Current Output Power Efficiency
GAH30S3V3B 36 - 75V 3.3V 30A 100W 91.5%
GAH60S3V3B 36 - 75V 3.3V 60A 200W 92.5%
GAH30S05B 36 - 75V 5V 30A 150W 92.5%
GAH10S12B 36 - 75V 12V 10A 120W 91.5%
GAH30S12B 36 - 75V 12V 30A 360W 95.5%
GAH03S48BP 36 - 75V 48V 3.125A 150W 93.0%
GAH12S28B 36 - 75V 28V 12A 350W 92.0%
GAH16S28B 36 - 60V 28V 16A 450W 93.0%
Model Selector
TolerancesDimensions: X.X±0.5mm[X.XX±0.02 in.] X.XX±0.25mm[X.XXX±0.010 in.]Pin: X.XX±0.10mm[X.XXX±0.004 in.]
* GAH30S3V3B, GAH30S12 and GAH60S3V3B without PIN3
Pin Description
Pin No. Function Pin No. Function
1 Vin(+) 6 Sense(-)
2 ON/OFF 7 Trim
3 CASE 8 Sense(+)
4 Vin(-) 9 Vout(+)
5 Vout(-)
Side View
7-Φ2.00[0.080]
7-Φ1.00[0.040]
3.8
0[0
.15
0]
11
.4[0
.45
]
2-Φ3.00[0.120]
2-Φ2.00[0.080]
2-Φ3.00[0.120]
2-Φ2.00[0.080]7-Φ1.00[0.040]
7-Φ2.00[0.080]1
2.7
[0.5
0]
3.8
0[0
.15
0]
Side View
4-Φ4.20[0.165]
4
3
2
1
5
6
7
8
9
48.26[1.900]
57.9[2.28]
61
.0[2
.40
]
50
.80
[2.0
00
]
35
.56
[1.4
00
]
15
.24
[0.6
00
]
Bottom ViewTop View
Mechanical Diagram
Unit: mm [in.]
15
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 16
Nonstandard Brick Series
BMP SERIES
GAC 15W Single Output Series
Introduction
The GAC 15W single output series use open-frame and industry standard package, effectively saving board space, the output voltage including 3.3V, 5V, 12V and 96V four levels, the efficiency more than 85%. All modules support primary ON/OFF control and Trim function. This series which conform to the RoHS6 requirement can be used in the fields of communication, data transmission and distributed power supply system.
Features
• Input under voltage protection • Over current protection • Short circuit protection • Output overvoltage protection • Remote on/off control * • Output voltage Trim *
* GAC0A1S96 without this function
Specification
Model Parameter Notes & Conditions
Output characteristics
Output line regulationGAC0A1S96 0.5%Vo
Vin=36 - 75V, ImaxOTHER 0.7%Vo
Output load regulation ALL 0.5%Vo Vin=48V, Iout=0 - Imax
Regulated voltage GAC0A1S96 3%Vo
The whole range of Vin, Iout and TAOTHER 0.5%Vo
Output ripple and noise (PK-PK) ALL 100mV Oscilloscope bandwidth: 20 MHz
Output voltage adjustment range (trim)
GAC0A1S96 NA -
OTHER 90% - 110% -
Input characteristics
Operating input voltage ALL 36 - 75V -
Maximum input current
GAC05S3V3, GAC01S12 0.5A
Vin=36V, ImaxGAC03S05 0.8A
GAC0A1S96 0.4A
Input reflected ripple current (PK-PK)
GAC05S3V3, GAC01S12, GAC0A1S96
20mAOscilloscope bandwidth: 20 MHz
GAC03S05 30mA
Protection characteristics
Input UVP ALLTurn on: 31 - 36VTurn off: 30 - 35V
Hysteresis: 1 - 3V
Output OVPGAC0A1S96 110% Constant voltage mode
OTHER 120% - 150% Hiccup
Over current ProtectionGAC0A1S96 110% - 200% Hiccup
OTHER 110% - 170%
Over temperature Protection ALL NA -
Absolute maximum ratings
Input voltageContinuousTransient (100 ms)
ALL -80V
100V
Operating ambient temperature ALL -40 - 85ºC -
Storage temperature ALL -55 - 125ºC -
Other characteristics
Remote on/off voltageLow levelHigh level
GAC0A1S96 NA -
OTHER Negative logic-0.7 - 1.2V
3.5 - 12V
Input-to-output Isolation voltage ALL 1500VDC Basic isolation
Mean time between failures (MTBF)
GAC0A1S96 2.5 million hours Telcordia SR332, 80% load, 300LFM, TA=40ºCOTHER 1.5 million hours
16
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 17
Nonstandard Brick Series
BMP SERIES
Model Selector
Model Input Voltage Output Voltage Output Current Output Power Efficiency
GAC05S3V3 36 - 75V 3.3V 4.5A 15W 87.5%
GAC03S05 36 - 75V 5V 3A 15W 88.0%
GAC01S12 36 - 75V 12V 1.25A 15W 87.5%
GAC0A1S96 36 - 75V 96V 0.1A 10W 85.0%
TolerancesDimensions: X.X±0.5mm[X.XX±0.02 in.] X.XX±0.25mm[X.XXX±0.010 in.]Pin: X.XX±0.10mm[X.XXX±0.004 in.]
* GAC0A1S96 without Pin1 and Pin5
Pin Description
Pin No. Function Pin No. Function
1 ON/OFF 4 Vout(+)
2 Vin(-) 5 Trim
3 Vin(+) 6 Vout(-)
Top View
50.8[2.00]
20.32[0.800]
5.0
8[0
.20
0]
20
.32
[0.8
00
]
25
.4[1
.00
]
1 6
5
4
2
3
Side View
5-Φ2.00[0.080]
5-Φ1.00[0.040]
10
.5[0
.41
]
3.8
0[0
.15
0]
Mechanical Diagram
Unit: mm [in.]
17
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 18
Nonstandard Brick Series
BMP SERIES
Features
• Input under voltage protection • Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • Remote on/off control • Output voltage Trim
GAC 25W Single Output Series
Introduction
The GAC 25W single output series use open-frame and industry standard package, effectively saving board space, the output voltage including 3.3V, 5V and 12V three levels, the efficiency more than 86%. All modules support primary ON/OFF control and Trim function. This series which conform to the RoHS6 requirement can be used in the fields of communication, data transmission and distributed power supply system.
Specification
Model Parameter Notes & Conditions
Output characteristics
Output line regulation
GBC06S3V3P 0.2%Vo
Vin=36 - 75V, ImaxGBC05S05P 1%Vo
GAC02S12P 0.1%Vo
Output load regulation
GBC06S3V3P 0.5%Vo
Vin=48V, Iout=0 - ImaxGBC05S05P 1%Vo
GAC02S12P 0.2%Vo
Regulated voltage ALL 3%Vo The whole range of Vin, Iout and TA
Output ripple and noise (PK-PK)
GBC06S3V3P 100mV
Oscilloscope bandwidth: 20 MHzGBC05S05P 75mV
GAC02S12P 60mV
voltage adjustment range (trim) ALL 90% - 110% -
Input characteristics
Operating input voltage ALL 36 - 75V -
Maximum input currentGBC06S3V3P, GBC05S05P 1A Vin=36V, Iout=6A
GAC02S12P 0.75A Vin=36V, Iout=2.1A
Input reflected ripple current (PK-PK)
GBC05S05P 50mAOscilloscope bandwidth: 20 MHz
GBC06S3V3P, GAC02S12P 40mA
Protection characteristics
Input UVP ALLTurn on: 31 - 36VTurn off: 30 - 35V
Hysteresis: 1 - 3V
Output OVP
GBC06S3V3P 118% - 150% Hiccup
GBC05S05P 120% - 170% Hiccup
GAC02S12P 115% - 140% Latch off
Over current Protection
GBC06S3V3P 110% - 200%
HiccupGBC05S05P 110% - 170%
GAC02S12P 110% - 190%
Over temperature ProtectionGBC06S3V3P, GBC05S05P 100 - 125ºC Converter will reset when over
temperature condition is removedHysteresis: 10ºCGAC02S12P 115 - 135ºC
Absolute maximum ratings
Input voltageContinuousTransient (100 ms)
ALL
-
80V -
100V -
Operating ambient temperature ALL -40 - 85ºC -
Storage temperature ALL -55 - 125ºC -
Other characteristics
Remote on/off voltage Low levelHigh level
ALL Positive logic-0.7 - 1.2V
3.5 - 12V
Input-to-output Isolation voltage ALL 1500VDC Basic isolation
Mean time between failures (MTBF)
GBC05S05P 2.5 million hours Telcordia SR332, 80% load, 300LFM, TA=40ºCGBC06S3V3P, GAC02S12P 1.5 million hours
18
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 19
Nonstandard Brick Series
BMP SERIES
Model Input Voltage Output Voltage Output Current Output Power Efficiency
GBC06S3V3P 36 - 75V 3.3V 6A 20W 86.0%
GBC05S05P 36 - 75V 5V 5A 25W 87.0%
GAC02S12P 36 - 75V 12V 2.1A 25W 88.5%
Model Selector
TolerancesDimensions: X.X±0.5mm[X.XX±0.02 in.] X.XX±0.25mm[X.XXX±0.010 in.]Pin: X.XX±0.10mm[X.XXX±0.004 in.]
* The width of GBC06S3V3P and GBC05S05P: 35.6[1.40]
Pin Description
Pin No. Function Pin No. Function
1 ON/OFF 4 Vout(+)
2 Vin(-) 5 Vout(-)
3 Vin(+) 6 Trim
Top View
17
.78
[0.7
00
]
5.0
8[0
.20
0]
10
.16
[0.4
00
]
50.80[2.000]
45.72[1.800]
1
2
3
6
5
4 40
.6[1
.60
]
10
.16
[0.4
00
]
10
.16
[0.4
00
]
15
.24
[0.6
00
]
4-R3.00[0.118]
Side View
6-Φ2.00[0.080]
6-Φ1.00[0.040]
3.8
0[0
.15
0]
12
.7[0
.50
]
Mechanical Diagram
Unit: mm [in.]
19
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 20
Nonstandard Brick Series
BMP SERIES
Features
• Input under voltage protection • Over current protection • Short circuit protection • Output overvoltage protection • Remote on/off control
GAC 15W Dual Outputs Series
Introduction
The GAC dual outputs series use open-rack and industry standard package, the efficiency reaching 88%, total output power 15W. All modules support primary ON/OFF control. This series which conform to the RoHS6 requirement can be used in the fields of communication, data transmission and distributed power supply system.
Specification
Model Parameter Notes & Conditions
Output characteristics
Output line regulation GAC15D12P0.02%Vo (+12V)
Vin=36 - 75V, Iout =0.62A0.04%Vo (-12V)
Output load regulation GAC15D12P0.1%Vo (+12V)
Vin=48V, Iout=0.06 - 0.62A4%Vo (-12V)
Regulated voltage GAC15D12P1%Vo (+12V)
The whole range of Vin, Iout and TA5%Vo (-12V)
Output ripple and noise (PK-PK) GAC15D12P 60mV Oscilloscope bandwidth: 20 MHz
Output voltage adjustment range (trim)
GAC15D12P NA -
Input characteristics
Operating input voltage GAC15D12P 36 - 75V -
Maximum input current GAC15D12P 0.55A Vin=36V, Po=15W
Input reflected ripple current (PK-PK)
GAC15D12P 20mA Oscilloscope bandwidth: 20 MHz
Protection characteristics
Input UVP GAC15D12PTurn on: 31 - 36VTurn off: 30 - 35V
Hysteresis: 1 - 3V
Output OVP GAC15D12P 110% - 133%(+12V) Hiccup(-12V) Hiccup while (+12V) OVP
Over current Protection GAC15D12P 113% - 190% Hiccup
Over temperature Protection GAC15D12P NA Without this function
Absolute maximum ratings
Input voltage ContinuousTransient (100 ms)
GAC15D12P -80V
100V
Operating ambient temperature GAC15D12P -40 - 85ºC -
Storage temperature GAC15D12P -55 - 125ºC -
Other characteristics
Remote on/off voltage Low levelHigh level
GAC15D12P Positive logic-0.7 - 1.2V
3.5 - 12V
Input-to-output Isolation voltage GAC15D12P 1500VDC Basic Isolation
Mean time between failures (MTBF)
GAC15D12P 1.5 million hoursTelcordia SR332, 80% load, 300LFM, TA=40ºC
20
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 21
Nonstandard Brick Series
BMP SERIES
Model Input Voltage Output Voltage Output Current Output Power Efficiency
GAC15D12P 36 - 75V ±12V 0.62A 15W 88.0%
Model Selector
TolerancesDimensions: X.X±0.5mm[X.XX±0.02 in.] X.XX±0.25mm[X.XXX±0.010 in.]Pin: X.XX±0.10mm[X.XXX±0.004 in.]
Pin Description
Pin No. Function Pin No. Function
1 ON/OFF 4 +12Vo
2 Vin(-) 5 COM
3 Vin(+) 6 -12Vo
Top View
50.8[2.00]
20.32[0.800]
5.0
8[0
.20
0]
20
.32
[0.8
00
]
25
.4[1
.00
]
1 6
5
4
2
3
Side View
5-Φ2.00[0.080]
5-Φ1.00[0.040]
10
.5[0
.41
]
3.8
0[0
.15
0]
Mechanical Diagram
Unit: mm [in.]
21
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 22
Nonstandard Brick Series
BMP SERIES
Features
• Input under voltage protection • Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • Remote on/off control
GAE Dual Outputs Series
Introduction
The GAE dual outputs series DC-DC converter is high-efficiency and power density isolated module. Total output power is 30W, output voltage ±12V, supporting primary ON/OFF control function. This series which conform to the RoHS6 requirement can be used in the fields of communication, data transmission and distributed power supply system.
Specification
Model Parameter Notes & Conditions
Output characteristics
Output line regulation GAE30D12 0.3%Vo (+12V) Vin=36 - 75V, Iout =1.25A
Output load regulation GAE30D12 0.5%Vo (+12V) Vin=48V, Iout=0.06 - 0.62A
Regulated voltage GAE30D12 3%Vo (+12V) The whole range of Vin, Iout and TA
Output ripple and noise (PK-PK) GAE30D12 150mV (±12V) Oscilloscope bandwidth: 20 MHz
Output voltage adjustment range (trim)
GAE30D12 70% - 105% (+12V) -
Input characteristics
Operating input voltage GAE30D12 36 - 75V -
Maximum input current GAE30D12 1.25A Vin=36V, Po=30W
Input reflected ripple current (PK-PK)
GAE30D12 30mA Oscilloscope bandwidth: 20 MHz
Protection characteristics
Input UVP GAE30D12Turn on: 31 - 36VTurn off: 30 - 35V
Hysteresis: 1 - 3V
Output OVP GAE30D12 116% - 138%(+12V) Hiccup(-12V) Hiccup while (+12V) OVP
Over current Protection GAE30D12 120% - 240% (±12V) Hiccup
Over temperature Protection GAE30D12 NA -
Absolute maximum ratings
Input voltage ContinuousTransient (100 ms)
GAE30D12 -80V
100V
Operating ambient temperature GAE30D12 -40 - 85ºC -
Storage temperature GAE30D12 -55 - 125ºC -
Other characteristics
Remote on/off voltage Low levelHigh level
GAE30D12 Positive logic-0.7 - 1.2V
3.5 - 12V
Input-to-output Isolation voltage GAE30D12 1500VDC Basic Isolation
Mean time between failures (MTBF)
GAE30D12 1.5 million hoursTelcordia SR332, 80% load, 300LFM, TA=40ºC
22
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 23
Nonstandard Brick Series
BMP SERIES
Model Input Voltage Output Voltage Output Current Output Power Efficiency
GAE30D12 36 - 75V ±12V 1.25A 30W 86.5%
Model Selector
TolerancesDimensions: X.X±0.5mm[X.XX±0.02 in.] X.XX±0.25mm[X.XXX±0.010 in.]Pin: X.XX±0.10mm[X.XXX±0.004 in.]
Pin No. Function Pin No. Function
1 Vin(+) 5 COM
2 ON/OFF 6 Trim
3 Vin(-) 7 Vout(+)
4 Vout(-)
Pin Description
Top View
3
2
1
4
5
6
7
57.9 [2.28]
22.9
[0.9
0]
17.7
8 [0
.700
]
6.34
[0.2
50]
19.0
4 [0
.750
]
50.80 [2.000]
Side View
9.2
[0.3
6]
3.50
[0.1
38]
3.80
[0.1
50]
Mechanical Diagram
Unit: mm [in.]
23
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 24
Nonstandard Brick Series
BMP SERIES
Features
• Input under voltage protection • Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • Remote on/off control
GAQ Dual Outputs Series
Introduction
The GAQ dual outputs series DC-DC converter are high-efficiency and power density isolated modules. This series contain 3 modules, output power from 45W to 65W, output voltage covering 3.3V/1.2V, 3.3V/1.5V and ±12V. All modules support primary ON/OFF control. This series which conform to the RoHS6 requirement can be used in the fields of communication, data transmission and distributed power supply system.
Specification
Model Parameter Notes & Conditions
Output characteristics
Output line regulation ALL 0.2%Vo Vin=36 - 75V, Imax
Output load regulation
GAQ45D3312, GAQ45D3315 0.5%Vo
Vin=48V, Iout=0 - Imax0.5%Vo
GAQ65D120.3%Vo
0.3%Vo
Regulated voltage GAQ45D3312, GAQ45D3315 2%Vo
The whole range of Vin, Iout and TAGAQ65D12 3%Vo
Output ripple and noise (PK-PK)
GAQ45D3312 30mV
Oscilloscope bandwidth: 20 MHzGAQ45D3315 50mV
GAQ65D12 75mV
Output voltage adjustment range (trim)
ALL 80% - 110% -
Input characteristics
Operating input voltage ALL 36 - 75V -
Maximum input current
GAQ45D3312 2.0A Vin=36V, I3.3Vo=8A, I1.2Vo=13A
GAQ45D3315 2.0A Vin=36V, I3.3Vo=8A, I1.5Vo=12A
GAQ65D12 2.7A Vin=36V, I12Vo=2.7A, I-12Vo=2.7A
Input reflected ripple current (PK-PK)
GAQ45D3312, GAQ45D3315 20mAOscilloscope bandwidth: 20 MHz
GAQ65D12 30mA
Protection characteristics
Input UVP ALLTurn on: 31 - 36VTurn off: 30 - 35V
Hysteresis: 1 - 3V
Output OVPGAQ45D3312, GAQ45D3315 120% - 150%
HiccupGAQ65D12 120% - 140%
Over current Protection
GAQ45D3312113% - 175%(3.3Vo)
Hiccup
115% - 170%(1.2Vo)
GAQ45D3315113% - 175%(3.3Vo)
125% - 180%(1.5Vo)
GAQ65D12 120% - 180%(±12Vo)
Over temperature ProtectionGAQ45D3312, GAQ45D3315 110 - 135ºC Converter will reset when
overtemperature condition is removedHysteresis:10ºCGAQ65D12 115 - 135ºC
Absolute maximum ratings
Input voltage ContinuousTransient (100 ms)
ALL -80V
100V
Operating ambient temperature ALL -40 - 85ºC -
Storage temperature ALL -55 - 125ºC -
Other characteristics
Remote on/off voltage Low levelHigh level
ALL Negative logic-0.7 - 1.2V
3.5 - 12V
Input-to-output Isolation voltage ALL 1500VDC Basic Isolation
Mean time between failures (MTBF)
ALL 1.5 million hoursTelcordia SR332, 80% load, 300LFM, TA=40ºC
24
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 25
Nonstandard Brick Series
BMP SERIES
TolerancesDimensions: X.X±0.5mm[X.XX±0.02 in.] X.XX±0.25mm[X.XXX±0.010 in.]Pin: X.XX±0.10mm[X.XXX±0.004 in.]
Pin No. Function Pin No. Function
1 Vin(+) 5 COM
2 ON/OFF 6 Trim
3 Vin(-) 7 Vout(+)
4 Vout(-)
Pin Description
Model Selector
Model Input Voltage Output Voltage Output Current Output Power Efficiency
GAQ45D3312 36 - 75V 3.3V&1.2V 8A&13A 45W 88.0%
GAQ45D3315 36 - 75V 3.3V&1.5V 8A&12A 45W 88.0%
GAQ65D12 36 - 75V ±12V 2.7A&2.7A 65W 90.0%
Top View
57.9[2.28]
50.80[2.000]
1 7
6
5
4
2
3
36
.8[1
.45
]
8.8
9[0
.35
0]
8.8
9[0
.35
0]
6.3
5[0
.25
0]
6.3
5[0
.25
0]
6.3
5[0
.25
0]
Side View
3.8
0[0
.15
0]
10
.2[0
.40
]
7-Φ2.00[0.080]
7-Φ1.00[0.040]
Mechanical Diagram
Unit: mm [in.]
25
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 26
Nonstandard Brick Series
BMP SERIES
Features
• Input under voltage protection • Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • Remote on/off control • Output voltage trim
GAQ 24V Output Series
Introduction
The GAQ 24V single output series use open-frame and industry standard 1/4 brick size, effectively saving board space, the efficiency reaching 92.5%, total output power 72W. All modules support primary ON/OFF control and TRIM function. This series which conform to the RoHS6 requirement can be used in the fields of communication, data transmission and distributed power supply system.
Specification
Model Parameter Notes & Conditions
Output characteristics
Output line regulation GAQ03S24 3%Vo Vin=36 - 75V, Iout=3A
Output load regulation GAQ03S24 3%Vo Vin=48V, Iout=0 - 3A
Regulated voltage GAQ03S24 3%Vo The whole range of Vin, Iout and TA
Output ripple and noise (PK-PK) GAQ03S24 300mV Oscilloscope bandwidth: 20 MHz
Output voltage adjustment range (trim)
GAQ03S24 66% - 100% -
Input characteristics
Operating input voltage GAQ03S24 36 - 75V -
Maximum input current GAQ03S24 2.4A Vin=36V, Iout=3A
Input reflected ripple current (PK-PK)
GAQ03S24 30mA Oscilloscope bandwidth: 20 MHz
Protection characteristics
Input UVP GAQ03S24Turn on: 31 - 36VTurn off: 30 - 35V
Hysteresis: 1 - 3V
Output OVP GAQ03S24 110% - 140% Hiccup
Over current Protection GAQ03S24 110% - 170% Hiccup
Over temperature Protection GAQ03S24 110 - 130ºCConverter will reset when overtemperature condition is removedHysteresis: 10ºC
Absolute maximum ratings
Input voltage ContinuousTransient (100 ms)
GAQ03S24 -80V
100V
Operating ambient temperature GAQ03S24 -40 - 85ºC -
Storage temperature GAQ03S24 -55 - 125ºC -
Other characteristics
Remote on/off voltage Low levelHigh level
GAQ03S24 Negative logic-0.7 - 1.2V
3.5 - 12V
Input-to-output Isolation voltage GAQ03S24 1500VDC Basic Isolation
Mean time between failures (MTBF)
GAQ03S24 1.5 million hoursTelcordia SR332, 80% load, 300LFM, TA=40ºC
26
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 27
Nonstandard Brick Series
BMP SERIES
Model Input Voltage Output Voltage Output Current Output Power Efficiency
GAQ03S24 36 - 75V 24V 3A 72W 92.5%
Model Selector
TolerancesDimensions: X.X±0.5mm[X.XX±0.02 in.] X.XX±0.25mm[X.XXX±0.010 in.]Pin: X.XX±0.10mm[X.XXX±0.004 in.]
Pin Description
Pin No. Function Pin No. Function
1 Vin(+) 4 Vout(-)
2 ON/OFF 5 Trim
3 Vin(-) 6 Vout(+)
Top View
50.80[2.000]
57.9[2.28]
1 6
5
4
2
3
36
.8[1
.45
]
17
.78
[0.7
00
]
12
.70
[0.5
00
]
19
.05
[0.7
50
]
Side View
3.8
0[0
.15
0]
8.7
[0.3
4]
6-Φ2.00[0.080]
6-Φ1.00[0.040]
Mechanical Diagram
Unit: mm [in.]
27
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 28
Nonstandard Brick Series
BMP SERIES
RAG Ring Generator Series
Introduction
The RAG series DC-AC converter are high-efficiency and power density standard ring generator. The output power is 40W, output voltage 75VAC@25Hz. This series support primary ON/OFF control function. This series which conform to the RoHS6 requirement can be used in the fields of the telephone system, integrated access device VoIP connector applications and so on.
Specification
Model Parameter Notes & Conditions
Output characteristics
Output line regulation RAG40S75P 0.5%Vo Vin=36 - 72V; Iout=0.53A
Output load regulation RAG40S75P 1%Vo Vin=48V; Iout=0 - 0.53A
Regulated voltage RAG40S75P 8%Vo The whole range of Vin, Iout and TA
Output voltage frequency RAG40S75P 25Hz -
Output voltage adjustment range (trim)
RAG40S75P NA -
Input characteristics
Operating input voltage RAG40S75P 36 - 72V -
Maximum input current RAG40S75P 1.5A Vin=0 - 72V; Iout=0.53A
Protection characteristics
Input UVP RAG40S75PTurn on: 31 - 36VTurn off: 30 - 35V
Hysteresis: 1 - 3V
Output OVP RAG40S75P NA -
Over current Protection RAG40S75P 110% - 190% Hiccup
Over temperature Protection RAG40S75P 105 - 125ºCConverter will reset when overtemperature condition is removedHysteresis: 10ºC
Absolute maximum ratings
Input voltage ContinuousTransient (100 ms)
RAG40S75P -82V
100V
Operating ambient temperature RAG40S75P -25 - 70ºC -
Storage temperature RAG40S75P -40 - 105ºC -
Other characteristics
Remote on/off voltage Low levelHigh level
RAG40S75P Positive logic0 - 30V
36 - 72V
Input-to-output Isolation voltage RAG40S75P 1000VDC Basic Isolation
Mean time between failures (MTBF)
RAG40S75P 1.5 million hoursTelcordia SR332, 80% load, 300LFM, TA=40ºC
Features
• Sine wave output, low distortion • Standard 25Hz tone • Input under voltage protection • Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • Remote on/off control
28
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 29
Nonstandard Brick Series
BMP SERIES
Model Input Voltage Output Voltage Output Current Output Power Efficiency
RAG40S75P 36 - 72V 75VAC@25Hz 0.53A 40W 85.0%
Model Selector
Pin No. Function Pin No. Function
1 ON/OFF 7 Vout 2
2 Case 8 Vout 2
3 Vin(-) 9 Vout 1
4 Vin(-) 10 Vout 1
5 Vin(+) 11 GND
6 Vin(+)
TolerancesDimensions: X.X±0.5mm[X.XX±0.02 in.] X.XX±0.25mm[X.XXX±0.010 in.]Pin: X.XX±0.10mm[X.XXX±0.004 in.]
Pin Description
Top View
65
43
2
78
910
83.8
4 [3
.301
]
81.28 [3.200]86.4 [3.40]88.4 [3.48]
78.7
6 [3
.101
]
17.8
0 [0
.701
]
2.56
[0.1
01]
63.5
2 [2
.501
]
68.6
0 [2
.701
]
86.4
[3.4
0]
88.4
[3.4
8]
Bottom View
10.0
0 [0
.394
]
3.80
[0.1
50]
13.0
[0.5
1]
Side View
Mechanical Diagram
Unit: mm [in.]
29
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 30
POL SERIES
Features
• Input under voltage protection • Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • Remote on/off control • Remote sense * • SMT reflow soldering
* NAK12S20-C without this function
NAK 20A Output Series
Introduction
NAK series is high performance SMT POL module, whose feature include wide range of input voltage, high power density and perfect protection functions. The output current is 20A. The output voltage can be set arbitrarily in the rating range. All modules can be used in DPA or IBA. This series which conform to the RoHS6 requirement is suitable for telecom devices, server, network and industry devices power supply and so on.
Specification
Model Parameter Notes & Conditions
Output characteristics
Output line regulationNAK03S20-A
1%VoVin=3.0 - 5.5V, Imax
NAK12S20-A, NAK12S20-C Vin=9 - 14V, Imax
Output load regulationNAK03S20-A
1%VoVin=3.3V/5.0V, Iout=0 - Imax
NAK12S20-A, NAK12S20-C Vin=12V, Iout=0 - Imax
Regulated voltage NAK12S20-C 2%Vo
The whole range of Vin, Iout and TANAK03S20-A, NAK12S20-A 3%Vo
Output ripple and noise (PK-PK) ALL 150mV Oscilloscope bandwidth: 20 MHz
Input characteristics
Operating input voltageNAK03S20-A 3.0 - 5.5V -
NAK12S20-A, NAK12S20-C 9 - 14V -
Protection characteristics
Input UVP
NAK03S20-ATurn on: 2.6 - 3.0VTurn off: 2.4 - 2.9V
Hysteresis: 0.3VNAK12S20-ATurn on: 6 - 7.4VTurn off: 5 - 6.4V
NAK12S20-CTurn on: 7 - 8.5VTurn off: 6 - 7.5V
Output OVP ALL 110% - 120% Self-recovery
Over current ProtectionNAK03S20-A 22 - 50A
HiccupNAK12S20-A, NAK12S20-C 22 - 40A
Over temperature Protection ALL 115 - 135ºCConverter will reset when over temperature condition is removedHysteresis: 5ºC
Absolute maximum rang
Input voltage (Continuous)NAK03S20-A 5.5V
-NAK12S20-A, NAK12S20-C 16V
Operating ambient temperature ALL -40 - 85ºC -
Storage temperature ALL -55 - 125ºC -
Other characteristics
Remote on/off voltageLow levelHigh level
ALL Positive logic-0.2 - 0.5V
2.0 - 5.0V
Mean time between failures (MTBF)
ALL 1.5 million hoursTelcordia SR332, 80% load, 300LFM, TA=40ºC
30
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 31
POL SERIES
Model Input Voltage Output Voltage Output Current Output Power Efficiency Notes
NAK03S20-A 3 - 5.5V 0.9 - 3.3V 20A 66W 95.0% With Remote Sense
NAK12S20-A 9 - 14V 0.9 - 5.3V 20A 106W 95.0% With Remote Sense
NAK12S20-C 9 - 14V 0.7 - 5.3V 20A 106W 93.5% Without Remote Sense
Model Selector
TolerancesDimensions: X.X±0.5mm[X.XX±0.02 in.] X.XX±0.25mm[X.XXX±0.010 in.]Pin: X.XX±0.05mm[X.XXX±0.002 in.]
* NAK12S20-C without Pin6
Pin Description
Pin No. Function Pin No. Function
1 Vin 5 SGND
2 GND 6 SENSE+
3 Vout 7 ON/OFF
4 Trim
Bottom View
3.03[0.119]
22.12[0.871]
24.00[0.945]
7_2.5X1.6[0.098X0.063]
3
2
1
4
5
6
7
13
.51
[0.5
32
]
12
.11
[0.4
77
]
8.3
1[0
.32
7]
1.4
1[0
.05
6]
1.4
2[0
.05
6]
4.2
2[0
.16
6]
8.7
1[0
.34
3]
12
.11
[0.4
77
]
Side View
10.44[0.411]
2.84[0.112]
Mechanical Diagram
Unit: mm [in.]
31
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 32
POL SERIES
Features
• Input under voltage protection • Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • Remote on/off control • Remote sense * • Multiple modules current sharing • SMT reflow soldering
* NAJ12S40-D without this function
NAJ 40A Output Series
Introduction
NAJ series is high performance SMT POL module, whose feature include wide range of input voltage, high power density and perfect protection functions. All models support current sharing. The output current is 40A. The output voltage can be set arbitrarily in the rating range. All modules can be used in DPA or IBA. This series which conform to the RoHS6 requirement is suitable for telecom devices, server, network and industry devices power supply and so on.
Specification
Model Parameter Notes & Conditions
Output characteristics
Output line regulation ALL 1%Vo Vin=10 - 14V, Imax
Output load regulation ALL 1%Vo Vin=12V, Iout=0 - Imax
Regulated voltage ALL 2%Vo The whole range of Vin, Iout and TA
Output ripple and noise (PK-PK) ALL 150mV Oscilloscope bandwidth: 20 MHz
Input characteristics
Operating input voltage ALL 9 - 14V -
Protection characteristics
Input UVP ALLTurn on: 7 - 9VTurn off: 5 - 7V
Hysteresis: 2V
Output OVP ALL 110% - 140% Self-recovery
Over current Protection ALL 44 - 70A Hiccup
Over temperature Protection ALL 115 - 135ºCConverter will reset when overtemperature condition is removedHysteresis: 5ºC
Absolute maximum rang
Input voltage (Continuous) ALL 16V -
Operating ambient temperature ALL -40 - 85ºC -
Storage temperature ALL -55 - 125ºC -
Other characteristics
Remote on/off voltageLow levelHigh level
ALL Positive logic-0.3 - 0.5V
0.86 - 3.0V
Mean time between failures (MTBF)
ALL 1.5 million hoursTelcordia SR332, 80% load, 300LFM, TA=40ºC
32
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 33
POL SERIES
Model Input Voltage Output Voltage Output Current Output Power Efficiency Notes
NAJ12S40-E 9 - 14V 0.7 - 3.3V 40A 132W 93.5% With Remote Sense
NAJ12S40-D 9 - 14V 0.7 - 3.3V 40A 132W 93.5% Without Remote Sense
Model Selector
Pin No. Function Pin No. Function
1 Vin 9 FSYN
2 GND 10 SENSE-
3 Vout 11 ON/OFF
4 Vout 12 SENSE+
5 GND 13 ISHARE
6 Vin 14 SGND
7 FB 15 TRIM
8 CLOCKOUT
TolerancesDimensions: X.X±0.5mm[X.XX±0.02 in.] X.XX±0.25mm[X.XXX±0.010 in.]Pin: X.XX±0.05mm[X.XXX±0.002 in.]
* NAJ12S40-D without Pin10 and Pin12
Pin Description
24.00[0.945]
21.92[0.863]
1.70[0.067]15-2.5X1.60[0.098X0.063]
28
.02
[1.1
03
]
26
.80
[1.0
55
]
23
.65
[0.9
31
]
20
.50
[0.8
07
]
17
.39
[0.6
85
]
14
.02
[0.5
52
]
10
.71
[0.4
22
]
7.5
7[0
.29
8]
4.4
3[0
.17
4]
1.2
8[0
.05
0]
2.1
3[0
.08
4]
9.6
0[0
.37
8]
12
.95
[0.5
10
]
15
.33
[0.6
04
]
18
.76
[0.7
39
]
25
.84
[1.0
17
]
1
2
34
5
67
8
9
10
11
12
13
14
15
Bottom View
2.84[0.112]
10.44[0.411]
Side View
Mechanical Diagram
Unit: mm [in.]
33
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 34
POL SERIES
Features
• Input under voltage protection • Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • Remote on/off control • Remote sense * • SMT reflow soldering
* NAD12S10-A has VS+ only
NAK 3D POL Series
Introduction
NAD series is high performance SMT POL module, whose feature include wide range of input voltage, high power density and perfect protection functions. The output current include 10A, 20A and 40A. The output voltage can be set arbitrarily in the rating range. All modules can be used in DPA or IBA. This series which conform to the RoHS6 requirement are suitable for telecom devices, server, network and industry devices power supply and so on.
Specification
Model Parameter Notes & Conditions
Output characteristics
Output line regulation ALL 1%Vo Vin=9 - 14V, Imax
Output load regulation ALL 1%Vo Vin=12V, Iout=0 - Imax
Regulated voltage ALL 3%Vo The whole range of Vin, Iout and TA
Output ripple and noise (PK-PK)
ALL 30mVVo≤1.2V, Oscilloscope bandwidth: 20 MHz
ALL 60mVVo>1.2V, Oscilloscope bandwidth: 20 MHz
Input characteristics
Operating input voltage ALL 9 - 14V -
Protection characteristics
Input UVP ALLTurn on: 6.5 - 8.5VTurn off: 5.0 - 7.0V
Hysteresis: 1.5V
Output OVP ALL 110% - 130% Self-recovery
Over current Protection
NAD12S10-A 10 - 25A
HiccupNAD12S20-A 22 - 38A
NAD12S40-A 44 - 70A
Over temperature Protection ALL 115 - 130ºCConverter will reset when overtemperature condition is removedHysteresis: 5ºC
Absolute maximum rang
Input voltage (Continuous) ALL 16V -
Operating ambient temperature ALL -40 - 85ºC -
Storage temperature ALL -55 - 125ºC -
Other characteristics
Remote on/off voltageLow levelHigh level
ALL Positive logic-0.3 - 0.5V
2.0 - 5.0V
Mean time between failures (MTBF)
ALL 2.5 million hoursTelcordia SR332, 80% load, 300LFM, TA=40ºC
34
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 35
POL SERIES
Pin Description
Pin No. Function Pin No. Function
1 ON/OFF 7 VS+
2 Vin 8 VS-
3 NC 9 PG
4 GND 10 NC
5 Trim 14 SIG_GND
6 Vout
NAD12S20-A
2-3.76[0.148]x1.48[0.058]
2.49[0.110]x2.13[0.084]
7-2.14[0.084]x1.43[0.056]
SQUARE 0.86 [0.034]
10.16 [0.400]
0.00
[0.0
00]
1.78
[0.0
70]
11.1
8 [0
.440
]
19.0
5 [0
.750
]20
.32
[0.8
00]
10.06 [0.396]
1.52
[0.0
60]
5.97
[0.2
35]
10.4
1 [0
.410
]
14.6
0 [0
.575
]
18.8
0 [0
.740
]
5.72 [0.225]5.72 [0.225]3.18 [0.125]1.52 [0.060]
1.55 [0.061]1.27 [0.050]0.00 [0.000]
3
1014
2 9 1
8
4 5 6 7
Bottom View Side View
1.60
[0.0
63]
9.20
[0.3
62]
Model Input Voltage Output Voltage Output Current Output Power Efficiency
NAD12S10-A 9 - 14V 0.7 - 5.3V 10A 50W 95.5%
NAD12S20-A 9 - 14V 0.7 - 2.0V 20A 40W 92.5%
NAD12S40-A 9 - 14V 0.7 - 2.0V 40A 80W 92.5%
Model Selector
Pin No. Function Pin No. Function
1 ON/OFF 7 GND
2 Vin 8 NC
3 GND 9 NC
4 Vout 10 PGOOD
5 VS+ 14 NC
6 Trim 16 NC
Pin Description
NAD12S10-A
Bottom View
4.95
[0.1
95]
9.52
[0.3
75]
12.1
9 [0
.480
]
0.00
[0.0
00]
1.52
[0.0
60]
6.10
[0.2
40]
8.38
[0.3
30]
10.6
7 [0
.420
]
9.53 [0.375]
12.19 [0.480]
3.81[0.150]
0.00 [0.000]
3- 3.76[0.148] x 1.48[0.058]
10.67 [0.420]
8.38 [0.330]
6.10 [0.240]
1.52 [0.060]
9- SQUARE 0.86[0.034]
34
5
14
6
16
1
107 8 9
2
1.60
[0.0
63]
10.8
0 [0
.425
]
Side View
Mechanical Diagram
Unit: mm [in.]
35
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 36
POL SERIES
Mechanical Diagram
Unit: mm [in.]
TolerancesDimensions: X.X±0.5mm[X.XX±0.02 in.] X.XX±0.25mm[X.XXX±0.010 in.]Pin: X.XX±0.05mm[X.XXX±0.002 in.]
Pin No. Function Pin No. Function
1 ON/OFF 9 NC
2 Vin 10 GND
3 NC 11 SIG_GND
4 GND 12 VS-
5 Vout 16 PG
6 Trim 17 NC
7 VS+ 19 NC
8 GND
Pin Description
NAD12S40-A
3
8
216 17
19
11
6 7 912
10
1
4 5
2-4.15[0.063]x2.52[0.099]13.46 [0.530]
2.14
[0.0
84]
0.00
[0.0
00]
2.22
[0.0
87]
13.8
2 [0
.544
]
20.8
0 [0
.819
]
28.7
0 [1
.130
]31
.66
[1.2
46]
4.95
[0.1
95]
9.33
[0.3
67]
15.0
5 [0
.593
]
19.3
4 [0
.761
]
24.1
7 [0
.952
]
28.9
9 [1
.141
]
33.0
2 [1
.300
]
11.70 [0.461]3.28[0.129]x1.73[0.068]
3.13[0.123]x1.76[0.069]
4.19 [0.165]1.38 [0.054]0.00 [0.000]
6-SQUQRE 1.73[0.068]
12.10 [0.476]8.38 [0.330]4.95 [0.195]1.91 [0.075]1.27 [0.050]5-SQUARE 1.52[0.060]
11.0
0 [0
.433
]
1.80
[0.0
71]
Bottom View Side View
36
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 37
POL SERIES
NAS Vertical SMT Package Series
Introduction
NAS series is high performance SMT POL module, whose feature include wide range of input voltage, high power density, perfect protection functions and supporting VR11.1. The output current is 80A. The output voltage can be set arbitrarily in the rating range. All modules can be used in DPA or IBA. This series which conform to the RoHS6 requirement is suitable for telecom devices, server, network and industry devices power supply, especially suitable for large current chip power supply such as x86 CPU, ASIC, FPGA and so on.
Features
• Input under voltage protection • Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • Remote on/off control • SMT reflow soldering
Specification
Model Parameter Notes & Conditions
Output characteristics
Output voltage setpoint
NAS12S80-A
1.2V 1.18 - 1.22V, Vin=12V
Output voltage range 0.75 - 1.2VAdjusted by setting the status of VID0 to VID7
Output line regulation 1%Vo Vin=9 - 14 V, Iout=80A
Output load regulation 1%Vo Vin=12V, Iout=0 - 80A
Regulated voltage 3%Vo The whole range of Vin, Iout and TA
Output ripple and noise (PK-PK) 50mV Oscilloscope bandwidth: 20 MHz
Input characteristics
Operating input voltage NAS12S80-A 9 - 14V -
Protection characteristics
Input UVP
NAS12S80-A
Turn on: 6.5 - 8.5VTurn off: 6 - 8V
Hysteresis: 1.0V
Output OVP 115% - 120% latch off
Over current Protection 110% - 175% Hiccup
Over temperature Protection 115 - 135ºCConverter will reset when overtemperature condition is removedHysteresis: 5ºC
Absolute maximum rang
Input voltage (Continuous)
NAS12S80-A
16V -
Operating ambient temperature -40 - 85ºC -
Storage temperature -55 - 125ºC -
Other characteristics
Remote on/off voltageLow levelHigh level
ALL Positive logic-0.3 - 0.5V
2.0 - 5.0V
Mean time between failures (MTBF)
NAS12S80-A 1.5 million hoursTelcordia SR332, 80% load, 300LFM, TA=40ºC
37
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 38
POL SERIES
TolerancesDimensions: X.X±0.5mm[X.XX±0.02 in.] X.XX±0.25mm[X.XXX±0.010 in.]
Pin No. Function Pin No. Function Pin No. Function Pin No. Function Pin No. Function
1 Vin 14 VID2 27 NC 40 GND 53 Vout
2 Vin 15 VID1 28 NC 41 Vout 54 Vout
3 GND 16 VID0 29 GND 42 Vout 55 Vout
4 GND 17 PSI 30 GND 43 Vout 56 Vout
5 EN-Vtt 18 IMON 31 Vin 44 Vout 57 GND
6 VR-RDY 19 Sense- 32 Vin 45 GND 58 GND
7 VR-FAN 20 Sense+ 33 Vout 46 GND 59 GND
8 VR-HOT 21 5V 34 Vout 47 GND 60 GND
9 VID7 22 NC 35 Vout 48 GND 61 Vout
10 VID6 23 NC 36 Vout 49 GND 62 Vout
11 VID5 24 NC 37 GND 50 GND 63 Vout
12 VID4 25 NC 38 GND 51 GND 64 Vout
13 VID3 26 NC 39 GND 52 GND
Pin Description
Model Selector
Model Input Voltage Output Voltage Output Current Output Power Efficiency
NAS12S80-A 9 - 14V 0.75 - 1.2V 80A 100W 89.5%
22
.3[0
.88
]
4-Φ1.20[0.047]
58.0[2.28]
Side View
Top View
13
.0[0
.51
]
11
.4[0
.45
]
38.0[1.50]
16.0[0.63]
2.0
[0.0
8]
Bottom View
6.7
[0.2
6]
52.5[2.07]
16 17 32
48 49 6433
1
Mechanical Diagram
Unit: mm [in.]
38
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 39
POL SERIES
NAP SIP Series
Introduction
NAP series is high performance SIP POL module, whose feature include wide range of input voltage, high power density and perfect protection functions. This series include BUCK and BOOST modules, the output current covering 4A, 6A, 10A and 16A four levels. The output voltage can be set arbitrarily in the rating range. All modules can be used in DPA or IBA. This series which conform to the RoHS6 requirement are suitable for telecom devices, server, network and industry devices power supply.
Model Parameter Notes & ConditionsOutput characteristicsOutput line regulation ALL 1%Vo The whole range of Vin, 100% loadOutput load regulation ALL 2%Vo Rating input voltage, Iout=0 - Imax Regulated voltage ALL 3%Vo The whole range of Vin, Iout and TA
Output ripple and noise (PK-PK)
NAP03S06-C, NAP03S06-E, NAP03S06-B, NAP03S06-A, NAP03S06-F, NAP05S06-B, NAP03S06-D, NAP05S06-A, NAP05S06-C, NAP03S16-A
50mV
Oscilloscope bandwidth: 20 MHzNAP05S10-A 70mVNAP03S04-A 100mVNAP03S15-A 60mV
NAP12S16-A50mV
Vout< 3.3V, Oscilloscope bandwidth: 20 MHz
75mVVout≥ 3.3V, Oscilloscope bandwidth: 20 MHz
Input characteristics
Operating input voltage
NAP03S06-C, NAP03S06-B, NAP03S06-A, NAP03S06-F, NAP03S15-A, NAP03S16-A
3.0 - 5.5V
-
NAP03S06-E 3.0 - 3.6VNAP03S06-D 3.15 - 3.6VNAP05S06-A, NAP05S06-B, NAP05S06-C, NAP05S10-A
4.5 - 5.5V
NAP03S04-A 3.0 - 4.0VNAP12S16-A 10 - 14V
Protection characteristics
Input UVP
NAP03S06-C, NAP03S06-E, NAP03S06-B, NAP03S06-A, NAP03S06-F, NAP05S06-B, NAP03S06-D, NAP05S06-A, NAP05S06-C, NAP03S15-A, NAP03S16-A
Turn on: 1.95 - 2.15VTurn off: 1.8 - 2.0V
Hysteresis: 0.15V
NAP05S10-ATurn on: 3.6 - 4.0V
Turn off: 1.87 - 3.8VHysteresis: 0.1V
NAP12S16-ATurn on: 8.25 - 9.2VTurn off: 7.25 - 8.1V
Hysteresis: 1.0V
NAP03S04-A NA Without this function
Output OVPNAP05S10-A, NAP12S16-A 105% - 125% Self-recoveryothers NA Without this function
Over current Protection
NAP03S06-C, NAP03S06-E, NAP03S06-B, NAP03S06-A, NAP03S06-F, NAP05S06-B, NAP03S06-D, NAP05S06-A, NAP05S06-C
7 - 18A
HiccupNAP05S10-A 12 - 30ANAP03S15-A, NAP12S16-A 17 - 40ANAP03S16-A 26 - 47ANAP03S04-A NA Without this function
Over temperature Protection
ALL 115 - 135ºCConverter will reset when over temperature condition is removedHysteresis: 5ºC
NAP03S04A NA Without this functionAbsolute maximum rang
Input voltage (Continuous)
NAP03S06-C, NAP03S06-B, NAP03S06-A, NAP03S06-F, NAP05S06-B, NAP05S06-A, NAP05S06-C, NAP03S15-A, NAP03S16-A
5.5V
-NAP03S06-E, NAP03S04-A, NAP03S06-D 4VNAP05S10-A 6VNAP12S16-A 16V
Operating ambient temperature
ALL -40 - 85ºC -
Storage temperature ALL -55 - 125ºC -Other characteristicsMean time between failures (MTBF)
ALL 1.5 million hoursTelcordia SR332, 80% load, 300LFM, TA=40ºC
Specification
Features
• Input under voltage protection * • Over current protection * • Short circuit protection * • Output overvoltage protection * • Over temperature protection * • Remote on/off control * • Support wave soldering
*NAP03S04-A without this function
39
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 40
POL SERIES
Model Input Voltage Output Voltage Output Current Output Power Efficiency Mechnical Diagram
NAP03S06-E 3.0 - 3.6V 1.8V 6A 10W 90.0% Diagram 2
NAP03S06-A 3.0 - 5.5V 2.1V 6A 12W 93.0% Diagram 1
NAP03S06-D 3.15 - 3.6V 2.5V 6A 15W 95.0% Diagram 1
NAP05S06-A 4.5 - 5.5V 3.3V 6A 20W 92.5% Diagram 1
NAP05S06-C 4.5 - 5.5V 3.3V 6A 20W 92.5% Diagram 2
NAP05S10-A 4.5 - 5.5V 3.3V 10A 33W 95.5% Diagram 1
NAP03S04-A 3.0 - 4.0V 5.0V 4A 20W 90.5% Diagram 3
NAP03S16-A 3.0 - 5.5V 0.75 - 3.3V 16A 50W 92.0% Diagram 1
NAP12S16-A 10 - 14V 0.85 - 5.0V 16A 80W 92.0% Diagram 1
Model Selector
Pin No. Function Pin No. Function
1 Vout 7 Vin
2 Vout 8 Vin
3 Sense 9 Power good
4 Vout 10 Trim
5 GND 11 ON/OFF
6 GND
* NAP03S16-A, NAP05S10-A and NAP12S16-A without Pin9
Pin Description
Diagram 1
Top View
1 2 3 4 5 6 7 8 9
50.80[2.000]
35.06[1.380]
13.20[0.520] 1011 2.54[0.100]
0.64x0.64[0.03x0.03]
36.83[1.450]
1.27[0.050]
11
.43
[0.4
50
]
13
.97
[0.5
50
]
Side View
1.00[0.039]
6.20[0.244]
Mechanical Diagram
Unit: mm [in.]
40
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 41
POL SERIES
Top View
1 2 3 4 5 6 7 8 9
50.80[2.000]
35.06[1.380]
13.20[0.520] 1011 2.54[0.100]
0.64x0.64[0.03x0.03]
36.83[1.450]
1.27[0.050]
11
.43
[0.4
50
]
13
.97
[0.5
50
]
Side View
1.00[0.039]
6.20[0.244]
Pin No. Function Pin No. Function
1 Vout(+) 7 Vin(-)
2 Vout(+) 8 Vin(+)
3 Vout(+) 9 Vin(+)
4 Vout(-) 10 Vin(+)
5 Vout(-) 11 Vin(+)
6 Vin(-)
TolerancesDimensions: X.X±0.5mm[X.XX±0.02 in.] X.XX±0.25mm[X.XXX±0.010 in.]
Pin Description
Diagram 3
Side View
2.54[0.100]
8.7
4[0
.34
4]
1.0
0[0
.03
9]
3.5
4[0
.13
9]
0.64x0.64[0.03x0.03]
10111 23 4 5 6 7 8 9
Bottom View
38.10[1.500]
1.27[0.050]
13
.97
[0.5
50
]
1.2
7[0
.05
0]
50.80[2.000]
Pin No. Function Pin No. Function
1 Vout 7 Vin
2 Vout 8 Vin
3 Sense 9 NA
4 Vout 10 Trim
5 GND 11 ON/OFF
6 GND
Pin Description
Diagram 2
41
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 42
SERVER POWER SERIES
Blade Server Power Supply Series
Introduction
Blade server power supply series contains AC-DC and DC-DC three products, including 2000W, 2500W and 3000W power, support N+1 redundant, hot swap, PMBus communication and relevant protection. Surge protection meet IEC61000-4-5 and ITU-TK.21 standard. Be suitable for servers, storage, advanced workstations, routers, network switches, telecommunications equipment and so on.
Model Parameter Notes & Conditions
Output characteristics
Output voltage range ALL 12.0 - 12.8 V -
Output power
PAC2000S12-CE 2000 WVin=90 - 200 VAC; Pomax=800WVin=200 - 220 VAC; Pomax=1800WVin=220 - 264 VAC; Pomax=2000W
PAC3000S12-CE 3000 WVin=90 - 175 VAC; Pomax=1200WVin=175 - 200 VAC; Pomax=2500WVin=200 - 264 VAC; Pomax=3000W
PDC2500S12-CE 2500 WVin=38 - 40 VDC; Pomax=2200WVin=40 - 72 VDC; Pomax=2500W
Output line regulation ALL 1%Vo Vin=90 - 264 VAC; Po=Max
Output load regulation ALL 1.2%Vo Vin=220 VAC; Po=0 - Max
Output ripple and noise (PK-PK) ALL 150mV Oscilloscope bandwidth: 20 MHz
Input characteristics
Operating input voltagePAC2000S12-CEPAC3000S12-CE
90 - 264 VAC@50/60Hz -
PDC2500S12-CE 38.4 - 72V
Maximum input current
PAC2000S12-CE 10A Vin=220 VAC; Po=2000W
PAC3000S12-CE 16A Vin=220 VAC; Po=3000W
PDC2500S12-CE 80A Vin=38 - 72V; Po=2500W
Power factorPAC2000S12-CEPAC3000S12-CE
0.98 Vin=220 VAC; Po=Max
Protection characteristics
Input OVP
PAC2000S12-CEPAC3000S12-CE
Turn on: 275V ACTurn off: 280V AC
Hysteresis: 5.0V
PDC2500S12-CETurn on: 77VTurn off: 82V
Hysteresis: 2.0V
Input UVP
PAC2000S12-CEPAC3000S12-CE
Turn on: 89V ACTurn off: 84V AC
Hysteresis: 5.0V
PDC2500S12-CETurn on: 36VTurn off: 34V
Hysteresis: 2.0V
Output OVP ALL 15V Latch-off
Over current Protection
PAC2000S12-CE 170A - 200A
Latch-offPAC3000S12-CE 256A - 300A
PDC2500S12-CE 213A - 250A
Over temperature Protection PAC3000S12-CE - Self-recovery
Absolute maximum ratings
Operating ambient temperature
PAC2000S12-CE -5 - 60ºC
-PAC3000S12-CE -5 - 50ºC
PDC2500S12-CE 0 - 50ºC
Storage temperature PAC3000S12-CE -40 - 85ºC -
Other characteristics
PMBus communication ALLInput voltage/current/power
Output voltage/current/powerOutput OVP/UVP alarm
-
Surge
PAC2000S12-CELine to earth: ±2.5kVLine to line: ±2.5kV
IEC61000-4-5
PAC3000S12-CELine to earth: ±6kVLine to line: ±6kV
IEC61000-4-5/ITU-TK.21
PDC2500S12-CELine to earth: ±4kVLine to line: ±2.5kV
IEC61000-4-5
Mean time between failures (MTBF)
ALL 0.5 million hoursTelcordia SR332, Vin=220VAC,100% load, TA=25ºC
Specification
Features
• Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • PMBus 1.2 communication
protocol • Suitable for the TT, TN, IT power
supply system * • N+N, N+M redundant backup • Multi modules parallel
*PDC2500S12-CE without this function
42
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 43
SERVER POWER SERIES
Model Input Voltage Output Voltage Output Current Output Power Efficiency
PAC2000S12-CE 90 - 264 Vac 12V 162.6A 2000W 94.5%
PAC3000S12-CE 90 - 264 Vac 12V 244A 3000W 94.5%
PDC2500S12-CE 38.4 - 72V 12V 203.3A 2500W 94.0%
Model Selector
Pin Definition Description Pin Definition Description
P1~P6 12V Output: 12V DC D2 PRESENT Power supply present (lagging pin)
P7~P12 GND Power GND A3 DCOK Indicator whether the DC output voltage is OK
A1 A0 Address0 B3 ACOK Indicator whether the AC output voltage is OK
B1 A1 Address1 C3 PS_INTERRUPT Power supply interruption signal
C1 A2 Address2 D3 PSON Power supply on/off control signal
D1 PS_KILL Power supply kill A4 NA -
A2 SCL PMBus clock signal B4 I_Monitor 12V DC load sharing
B2 SDA PMBus data signal C4 Sense+ 12V DC remote sense+
C2 GND Signal GND D4 Sense- 12V DC remote sense-
Tolerances±0.5[0.02in.] (≤63[2.48])±1.0[0.04in.] (>63[2.48])
Pin definition of output socket:
Mechanical Diagram
Unit: mm [in.]
Input connector:3000W --- IEC 60320 C202000W --- IEC 60320 C142500W --- M6 double OT terminal
Output socket: Tyco (1-6450831-8)Mating connector: Tyco (1-6450861-3)
DCBA
1 2 3 4
P1 P5 P9P2 P6 P10P3 P7 P11P4 P8 P12
Output Socket
303.5 [11.95]
3.8
[0.1
5]
14.6
[0.5
7]
10.0 [0.39]
40.5
[1.9
5]
Side View
126.
0 [4
.96]
97.5
[3.8
4]11
.5 [0
.45]
276.8 [10.90]17
.0 [0
.67]
Top View
Back View
NEG(-)
RTN(+)
PDC2500S12-CE
Front View
PAC2000S12-CE & PAC3000S12-CE
PAC2000S12-CEinput connector
43
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 44
SERVER POWER SERIES
Rack Server Power Supply Series
Introduction
Rack server power supply series contains 750W and 460W two power levels, support N+1 redundant, hot swap, high voltage DC input, PMBus communication and relevant protection. Surge protection meet IEC61000-4-5 and ITU-TK.21 standard. Be suitable for servers, storage, advanced workstations, routers, network switches, telecommunications equipment and so on.
Model Parameter Notes & Conditions
Output characteristics
Output voltage range ALL11.85 - 12.45 V
11.4 - 12.6 V@12V StandbyVin=90 - 264 VAC; Po=Max Vin=192 - 288 VDC; Po=Max
Output power
PAC750D1212-CE 750WVin=90 - 264 VAC; Pomax=750WVin=192 - 288 VDC; Pomax=750W
PAC460D1212-CE 460WVin=90 - 264 VAC; Pomax=460WVin=192 - 288 VDC; Pomax=460W
Output ripple and noise (PK-PK) ALL 120mV Oscilloscope bandwidth: 20 MHz
Input characteristics
Operating input voltage ALL 90 - 264 VAC@50/60Hz;
-192- 288 VDC
Maximum input currentPAC750D1212-CE 10A Vin=230 VAC; Po=750W
PAC460D1212-CE 6A Vin=230 VAC; Po=460W
Power factor ALL 0.97 Vin=230 VAC; Po=Max
Protection characteristics
Input UVP ALL Turn on: 89V ACTurn off: 84V AC
Hysteresis: 5.0V
Input OVP ALL Turn on: 275V ACTurn off: 280V AC
Hysteresis: 5.0V
Output OVP ALL 15V Latch-off
Over current Protection
PAC750D1212-CE73A - 93A
2.5 - 3 A@12V Standby Latch-off
PAC460D1212-CE43A - 53A
2.5 - 3 A @12V Standby
Over temperature Protection ALL - Self-recovery
Absolute maximum ratings
Operating ambient temperature ALL -5 - 55ºC -
Storage temperature ALL -40 - 85ºC -
Other characteristics
PMBus communication ALLInput voltage/current/power
Output voltage/current/powerOutput OVP/UVP alarm
-
Surge ALLLine to earth: ±2.5 kVLine to line: ±2.5kV
IEC61000-4-5
Mean time between failures (MTBF)
ALL 0.5 million hoursTelcordia SR332, Vin=220VAC,100% load, TA=25ºC
Specification
Features
• Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • PMBus 1.2 communication
protocol • Suitable for the TT, TN, IT power
supply system • N+1 redundant backup (N≤5) • Multi modules parallel
44
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 45
SERVER POWER SERIES
Model Input Voltage Output Voltage Output Current Output Power Efficiency
PAC750D1212-CE90 - 264 Vac
192V-288V dc 12V/12V 62.5A/2A 750W 94%
PAC460D1212-CE90 - 264 Vac
192V-288V dc 12V/12V 38.3A/2A 460W 94%
Model Selector
Pin Definition Description Pin Definition Description
01~13, 52~64 12V Main output: 12 V DC 32 SCL I2C clock signal
14~26, 39~51 GND 12V&12VSB Power GND 33 PSON Power supply on/off control signal
27 A2 Address2 34 I-MON 12 V DC load sharing
28 A1 Address1 35 PSOK Indicator whether the main output voltage is OK
29 A0 Address0 36 PRESENT Power supply module present (short pin)
30 GND I2C GND 37 12VSB Standby output: 12 V DC
31 SDA I2C data signal 38 PS_INTERRUPT I2C interruption signal
Tolerances±0.5[0.02in.] (≤63[2.48])±1.0[0.04in.] (>63[2.48])
Pin definition of output gold finger:
Mechanical Diagram
Unit: mm [in.]
Input connector: IEC 60320 C14Gold finger mating connector: FCI (10075664-003LF)
Top View
194.2 [7.64]
227.0 [8.94]
83.5
[3.2
9]1.
4 [0
.06]11.1 [0.44]
Barcode
Product nameplate
Side View
31.0 [1.22] 190.5 [7.50]
196.5 [7.74]
8.3
[0.3
3]
1.6
[0.0
6]
14.0
[0.5
5]12
.5 [0
.49]86.4 [3.40]
38.4
[1.5
1]
40.5
[1.5
9]
Front View
Back View
Output Gold Finger
TOP
BOTTOM
33
32
38
27
39
26
51
14
52
13
64
1
45
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 46
COMMUNICATION CUSTOM POWER SERIES
Features
• Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • Suitable for the TT, TN, IT power
supply system
Model Parameter Notes & Conditions
Output characteristics
Output voltage range PAC440D5412-ON-51.41 ~ -54.59V11.64 ~ 12.36V
-
Output power PAC440D5412-ON-53.5V@380W
12V@60W-
Output line regulation PAC440D5412-ON 1%Vo Vin=90 - 264 VAC; Po=440W
Output load regulation PAC440D5412-ON 3%Vo Vin=220 VAC; Po=0 - 440W
Output ripple and noise (PK-PK) PAC440D5412-ON-53.5V@500mV
12V@600mVOscilloscope bandwidth: 20 MHz
Input characteristics
Operating input voltage PAC440D5412-ON90 - 290
VAC@50/60Hz-
Maximum input current PAC440D5412-ON 5.3A Vin=220 VAC; Po=440W
Power factor PAC440D5412-ON 0.98 Vin=220 VAC; Po=440W
Protection characteristics
Input UVP PAC440D5412-ONTurn on: 90V ACTurn off: 85V AC
Hysteresis: 5.0V
Output OVP PAC440D5412-ON-57 ~ -60V13.5 ~ 16V
Hiccup
Over current Protection PAC440D5412-ON-53.5V@8 - 10A12V@6 - 7.5A
Hiccup
Over temperature Protection PAC440D5412-ON 75ºC Self-recovery
Absolute maximum ratings
Operating ambient temperature PAC440D5412-ON -25 - 55ºC -
Storage temperature PAC440D5412-ON -40 - 70ºC -
Other characteristics
Surge PAC440D5412-ONLine to earth: ±6 kVLine to line: ±6 kV
IEC61000-4-5/ITU-TK.21
Mean time between failures (MTBF) PAC440D5412-ON 0.25 million hoursTelcordia SR332, Vin=220VAC, 100% load, TA=25ºC
Specification
PAC440D5412-ON Power Module
Introduction
PAC440D5412O-ON Open frame AC-DC POE power module has 90 to 290Vac wide input voltage, -53V and 12V dual isolated outputs, total rating output power 440W (12V/60W; -53Vdc /380W). The module is environmental air cooling. Surge protection meet IEC61000-4-5 and ITU-TK.21 standard. Be suitable for switches, routers, access equipments and so on, that need dual power supply of 12V and 48V.
46
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 47
COMMUNICATION CUSTOM POWER SERIES
Model Input Voltage Output Voltage Output Current Output Power Efficiency
PAC440D5412-ON 90 - 290 Vac -53.5V/12V 7.2A/5A 440W 91.5%
Model Selector
Tolerance190.0±0.5[7.48±0.02in]90.0±0.5[3.54±0.02in]36.0±1.0[1.42±0.04in]
Pin definition of output connector:
Pin Definition Colour Description
1 -53V Blue Output: -53 V DC
2 -53V Blue Output: -53 V DC
3 NC - Keeping float
4 alarm Green AC input power off alarm (H:OK; L:abnormal)
5 +12V Red Output: 12 V DC
6 +12V Red Output: 12 V DC
7 +12V Red Output: 12 V DC
8 RTN(-53V) Yellow RTN(-53V)
9 RTN(-53V) Yellow RTN(-53V)
10 NC - Keeping float
11 POWER_GOOD Gray Indicator whether the 12V/-53V output voltage is OK (H:OK; L:abnormal)
12 12V_GND Black 12V GND
13 12V_GND Black 12V GND
14 12V_GND Black 12V GND
Mechanical Diagram
Unit: mm [in.]
90.0
[3.5
4]Top View
190.0 [7.48]
36.0
[1.4
2]
Side View
Side View
1 2 3 4 5 6 7
8 9 10 11 12 13 14
Output connector: Molex (39-01-2145)
Input connector: Senda Zhejiang(SD W50801-3A-HW)
2.40
N
L
4.5
47
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 48
COMMUNICATION CUSTOM POWER SERIES
Model Parameter Notes & Conditions
Output characteristics
Output voltage range PAC500D5412-CE-51.89 ~ -55.11V
11.4 ~ 12.6V-
Output power PAC500D5412-CE-53.5V@380W
12V@120W-
Output line regulation PAC500D5412-CE 1%Vo Vin=90 - 264 VAC; Po=500W
Output load regulation PAC500D5412-CE 3%Vo Vin=220 VAC; Po=0 - 500W
Output ripple and noise (PK-PK) PAC500D5412-CE-53.5V@500mV
12V@200mVOscilloscope bandwidth: 20 MHz
Input characteristics
Operating input voltage PAC500D5412-CE90 - 290
VAC@50/60Hz-
Maximum input current PAC500D5412-CE 6.3A Vin=220 VAC; Po=500W
Power factor PAC500D5412-CE 0.98 Vin=220 VAC; Po=500W
Protection characteristics
Output OVP PAC500D5412-CE-57 ~ -60 V13.4 ~ 15V
Latch off
Over current Protection PAC500D5412-CE-53.5V@8 - 10A12V@12 - 16A
Hiccup
Over temperature Protection PAC500D5412-CE 70ºC Self-recovery
Absolute maximum ratings
Operating ambient temperature PAC500D5412-CE -25 - 55ºC -
Storage temperature PAC500D5412-CE -40 - 85ºC -
Other characteristics
I2C communication PAC500D5412-CEInput voltage/current/power
Output voltage/current/powerOutput OVP/UVP alarm
-
Surge PAC500D5412-CELine to earth: ±6 kVLine to line: ±6 kV
IEC61000-4-5/ITU-TK.21
Mean time between failures (MTBF) PAC500D5412-CE 0.25 million hoursTelcordia SR332, Vin=220VAC, 100% load, TA=25ºC
Specification
PAC500D5412-CE Power Module
Introduction
PAC500D5412-CE cassette AC-DC POE power module has 90 to 290Vac wide input voltage, -53V and 12V dual isolated outputs, total rating output power 500W (12V/120W; -53Vdc /380W). The module is configured with fan for cooling through a back-to-front airflow. Surge protection meet IEC61000-4-5 and ITU-TK.21 standard. Be suitable for switches, routers, access equipments and so on, that need dual power supply of 12V and 48V.
Features
• Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • I2C communication protocol • Hot swap • Suitable for the TT, TN, IT power
supply system • 1+1 redundant backup
48
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 49
COMMUNICATION CUSTOM POWER SERIES
Pin definition of output socket:
Pin Definition Description
P3 12V+12V output
P4 12VGND
D5 I2C-SDA I2C data signal
D6 I2C-SCL I2C clock signal
D4 3.3V3.3V power supply from the main board, giving I2C chip
power supply of the module
C4 A0 I2C E2PROOM address0
C5 A1 I2C E2PROOM address1
C6 PRESENTTo indicate to the system that the module is inserted in the power bay. This pin has been shorted to the 12VGND in the
module
D3 PG-12VIndicator whether the 12V output voltage is OK, using
12VGND (H:OK, L:abnormal)
B4 WPWrite Protect: this pin should connected to 3.3V power
supply from the main board, using 12VGND
B6 A2 I2C E2PROOM address2
A3 SHARE-48V48V output current sharing signal, when two modules
working in current sharing mode, this pin of each module should connect together
A4 PG-48VIndicator whether the 48V output voltage is OK, using
12VGND (H:OK, L:abnormal)
A5 PSKILLHot swap signal, short pin, when this pin connect to the
12VGND by the back board, the module be enable
P2 48V-48V output
P1 48V+(RTN)
Tolerances±0.5[0.02in.] (≤63[2.48])±1.0[0.04in.] (>63[2.48])
Input connector: IEC 60320 C14Output socket: JONHON (DP2TJW0424-007)Mating connector: JONHON (DP2ZJB0424-001)
Mechanical Diagram
Unit: mm [in.]
FC-3-3B
Top View Front View
43
.2[1
.70]
19
.9[0
.78]
INPUT
OUTPUT
100-240Vac 50/60Hz 7-3.5A
18.0 [0.71]
15-M3X6
9.3 [0.37]
39
.8[1
.57]
195.4 [7.69]
Side View Back View
90.0 [3.54]57.2 [2.25]43.3 [1.70]
9.0 [0.35]
Output Socket
HAHAPAPAPAPA
DCBA
ROW SPOW ER
E1 P1 P2 P3 P4 E2
POW ERSIGNAL1 2 3 4 5 6
UTSR
UTSR
UTSR
UTSR
UTSR
UTSR
Model Input Voltage Output Voltage Output Current Output Power Efficiency
PAC500D5412-CE 90 - 264 Vac -53.5V/12V 7.1A/10A 500W 89.0%
Model Selector
49
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 50
COMMUNICATION CUSTOM POWER SERIES
Features
• Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • I2C communication protocol • Hot swap • Suitable for the TT, TN, IT power
supply system • 1+1 redundant backup
PAC1000D5403-CN Power Module
Introduction
PAC1000D5403-CN cassette AC-DC power module has 90 to 290Vac wide input voltage, -53.5V and 3.3V dual isolated outputs, total rating output power 1000W (53.5V/900W; 3.3Vdc /82.5W). The module is environmental air cooling. The module is suitable for the application of transport network.
Model Parameter Notes & Conditions
Output characteristics
Output voltage range PAC1000D5403-CN50.8 ~ 56.2V3.23 - 3.57 V
-
Output power [email protected]@82.5W
-
Output line regulation PAC1000D5403-CN53.5V@2%[email protected]%
Vin=90 - 264 VAC; Po=1000W
Output load regulation PAC1000D5403-CN53.5V@2%[email protected]%
Vin=220 VAC; Po=0 - 1000W
Output ripple and noise (PK-PK) [email protected]@100mV
Oscilloscope bandwidth: 20 MHz
Input characteristics
Operating input voltage PAC1000D5403-CN90 - 290
VAC@50/60Hz-
Maximum input current PAC1000D5403-CN 9A Vin=220 VAC; Po=1000W
Power factor PAC1000D5403-CN 0.98 Vin=220 VAC; Po=1000W
Protection characteristics
Input OVP PAC1000D5403-CNTurn on: 290V ACTurn off: 300V AC
Hysteresis: 5.0V
Input UVP PAC1000D5403-CNTurn on: 90V ACTurn off: 85V AC
Hysteresis: 5.0V
Output OVP PAC1000D5403-CN58.5 ~ 61.5V3.8 ~ 5.0V
[email protected]@Hiccup
Over current Protection [email protected] - 21.8A
3.3V@33 - 42AHiccup
Over temperature Protection PAC1000D5403-CN - Self-recovery
Absolute maximum ratings
Operating ambient temperature PAC1000D5403-CN -5 - 55ºC -
Storage temperature PAC1000D5403-CN -40 - 85ºC -
Other characteristics
I2C communication PAC1000D5403-CN
Output voltage; Output OVP alarm;
OTP alarm; Electronic label
-
Impulse current PAC1000D5403-CN DM: 3kA, CM: 5kA -
Surge PAC1000D5403-CNLine to earth: ±6 kVLine to line: ±6 kV
IEC61000-4-5/ITU-TK.21
Specification
50
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 51
COMMUNICATION CUSTOM POWER SERIES
Model Input Voltage Output Voltage Output Current Output Power Efficiency
PAC1000D5403-CN 90 - 290 Vac 53.5V/3.3V 16.8A/24.3A 1000W 93.0%
Model Selector
Mechanical Diagram
Unit: mm [in.]
183.
80 [7
.24]
49.9
5 [1
.97]
18.9
5 [0
.75]
2-5.
20 [0
.20] 186.15 [7.33]
196.55 [7.74]
21.75 [0.86]
208.90 [8.22]
Top View
Front View
PWR
OFF
~100-120V;50/60Hz;8A~200-240V;50/60Hz;5A
ON
API
U
20
.32
[0.8
0]
32
.87
[1.2
9] 70.0 [2.76]
193.80 [7.63]
40.0 [1.57]
41
.83
[1.6
5]
183.8 [7.24]
5.0 [0.20]
Back View
173.40 [6.83]
193.80 [7.63]
Input connector: IEC 60320 C14Output socket: J1—STARCONN (091A01-8A00A) J2, J3, J4----FCI (10073379-001LF)
39.7
4 [1
.56]
15.9
[0.6
3]
0.6
[0.0
2]
Side View
VO3 GND RTN VO1
J1
J2 J3 J4
EDCBA
6 5 4 3 2 1
Output Socket
Tolerances±0.5[0.02in.] (≤63[2.48])±1.0[0.04in.] (>63[2.48])
Pin definition of J1:
Pin Definition Description
A1 PRESENT To indicate to the system that the module is inserted in the power bay. This pin has been shorted to the GND in the module
A2 - A6 NA -
B1 - B6 NA -
C1 - C6 GND 3.3V output GND
D1 - D6 NA -
E1 ALARM AC input power off alarm signal (H:abnormal, L:OK)
E2 I2C-SCL I2C clock signal
E3 I2C-SDA I2C data signal
E4 SLOT ADDRESS 1 Slot address and I2C communication address; A3: A2: A1000: The module in slot A010: The module in slot B
E5 SLOT ADDRESS 2
E6 SLOT ADDRESS 3
51
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 52
COMMUNICATION CUSTOM POWER SERIES
PAC2700S54-CB Power Module
Introduction
PAC2700S54-CB cassette AC-DC power module has 90 to 290Vac wide input voltage and single output of -53.5V. The module is configured with fan for cooling through a front-to-back airflow, support CAN communication and multi modules current sharing. Surge protection meet IEC61000-4-5 and ITU-TK.21 standard. Be suitable for switches, blade server, routers, transport network equipments and so on.
Model Parameter Notes & Conditions
Output characteristics
Output voltage range PAC2700S54-CB -53.5V -
Output power PAC2700S54-CB2700W≤1200W
Vin=176 - 290V ACVin=90 - 175V AC
Output line regulation PAC2700S54-CB 1%Vo Vin=90 - 290 VAC; Po=2700W
Output load regulation PAC2700S54-CB 1%Vo Vin=220 VAC; Po=0 - 2700W
Output ripple and noise (PK-PK) PAC2700S54-CB 300mV Oscilloscope bandwidth: 20 MHz
Input characteristics
Operating input voltage PAC2700S54-CB 90 - 290 VAC@50/60Hz -
Maximum input current PAC2700S54-CB 18.5A Vin=220 VAC; Po=2700W
Power factor PAC2700S54-CB 0.98 Vin=220 VAC; Po=2700W
Protection characteristics
Input OVP PAC2700S54-CBTurn on: 290V ACTurn off: 300V AC
Hysteresis: 10.0V
Input UVP PAC2700S54-CBTurn on: 90V ACTurn off: 80V AC
Hysteresis: 10.0V
Output OVP PAC2700S54-CB 58.5 - 60.5V Latch-off
Over current Protection PAC2700S54-CB
Iomax=61A@Vo=40 - 53.5V;Iomax=55A@Vout=30 - 40V;Iomax=35A@Vout=17 - 30V;Iomax=25A@Vout=0 - 17V;
Hiccup: power on-off repeatedly
Over temperature Protection PAC2700S54-CB - Self-recovery
Absolute maximum ratings
Operating ambient temperature PAC2700S54-CB -25 - 55ºC -
Storage temperature PAC2700S54-CB -40 - 70ºC -
Other characteristics
CAN communication PAC2700S54-CBInput voltage/current/power
Output voltage/current/powerOutput OVP/UVP alarm
-
Surge PAC2700S54-CBLine to earth: ±6kVLine to line: ±6kV
IEC61000-4-5/ITU-TK.21
Mean time between failures (MTBF) PAC2700S54-CB 0.45 million hoursTelcordia SR332, Vin=220VAC, 100% load, TA=25ºC
Specification
Features
• Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • CAN communication protocol • Suitable for the TT, TN, IT power
supply system • N+N, N+M redundant backup
52
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 53
COMMUNICATION CUSTOM POWER SERIES
Model Input Voltage Output Voltage Output Current Output Power Efficiency
PAC2700S54-CB 90 - 290 Vac -53.5V 50.5A 2700W 95.5%
Model Selector
Mechanical Diagram
Unit: mm [in.]
Front View
Input
PAC-2700WA
Output Alarm
Back View
8.9 [0.35]11.9 [0.47]
12.8 [0.50]
5.7
[0.2
2]
25.9
[1.0
2]
10.5
[0.4
1]
9.9 [0.39]
19.4 [0.76]
30.3 [1.19]
20-M2_5X8 7-M3X6 13.0 [0.51]
104.
8 [4
.13]
5.9 [0.23]
14.7 [0.58]470.9 [18.54]
425.3 [16.74]
TOP
Top View
5.7
[0.2
2]4.
7 [0
.18]
12.5
[0.4
9]30
.6 [1
.20]
40.8
[1.6
1]
Side View
ROW E
ROW D
ROW C
ROW B
ROW A
1 6
Communication interface
Pin definition of communication interface:
Pin Definition Description
A4 ISHARE+ ISHARE+
A5 ISHARE- ISHARE-
A6 ADDR3 Address3
B1 PRESENTTo indicate to the system that the module is inserted in the power bay. This pin has been shorted to the
VCC_GND in the module
B2 VCC_GND Return loop of VCC which come from the system
B4, B5 ON/OFF ON/OFF control signal (H:OFF; L:ON)
B6 ADDR2 Address2
C5 ADD5 Address5
C6 ADD1 Address1
D1 CAN_L_1 CAN L of channel 1
D3 CAN_L_0 CAN L of channel 0
D5 ADDR4 Address4
D6 ADDR0 Address0
E1 CAN_H_1 CAN H of channel 1
E3 CAN_H_0 CAN H of channel 0
E5 ENABLEOutput enable control (H:disable.L:enable), when “ON/OFF” and “ENABLE” both be enabled, the
module can output
E6 ADDR_GND Address signal GND
A1 - A3, C1 - C4, D2, D4, E2, E4
NA -
DC Output: -48V RTN Communication Interface
AC input: PE L N
Tolerances±0.5[0.02in.] (≤63[2.48])±1.0[0.04in.] (>63[2.48])
Input connector: JONHON (CZ36E-3T)Output socket:DC output---MOLEX (75556-1500)Communication interface: Tyco (5223008-1)
53
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 54
COMMUNICATION CUSTOM POWER SERIES
PAC1600T5453-CB Power Module
Introduction
PAC1600T5453-CB cassette AC-DC power module has 90 to 290Vac wide input voltage, 53V/52.5/3.3V triple isolated outputs, total rating output power 1600W. The module is configured with fan for cooling through a left-to-right airflow, support Hot-swap. Surge protection meet IEC61000-4-5 and ITU-TK.21 standard. Be suitable for the application of switches, routers and so on.
Model Parameter Notes & Conditions
Output characteristics
Output voltage range [email protected] ~ [email protected] ~ [email protected] - 3.57 V
-
Output power PAC1600T5453-CBVo1@[email protected]@7.6A
22A@Vin=176 - 290V, <22A@Vin=90-175V7.6A@Vin=176 - 290V, <7.6A@Vin=90-175V7.6A@Vin=90 - 290V
Output line regulation PAC1600T5453-CB 2%Vo Vin=90 - 290 VAC; Po=1600W
Output load regulation PAC1600T5453-CB 5%Vo Vin=220 VAC; Po=0 - 1600W
Output ripple and noise (PK-PK) PAC1600T5453-CBVo1@300mVVo2@300mVVo3@100mV
Oscilloscope bandwidth: 20 MHz
Input characteristics
Operating input voltage PAC1600T5453-CB 90 - 290 VAC@50/60Hz -
Maximum input current PAC1600T5453-CB 10A Vin=220 VAC; Po=1600W
Power factor PAC1600T5453-CB ≥0.95Vin=110 VAC; Po=986WVin=220 VAC; Po=1600W
Protection characteristics
Input OVP PAC1600T5453-CBTurn on: 290V ACTurn off: 295V AC
Hysteresis: ≥5.0V
Input UVP PAC1600T5453-CBTurn on: 90V ACTurn off: 85V AC
Hysteresis: ≥5.0V
Output OVP PAC1600T5453-CBVo1/[email protected] - 61.5V
[email protected] - 4.9VLatch-offHiccup
Over current Protection PAC1600T5453-CBVo1+Vo2@30 - 33 [email protected] - 22.5A
Hiccup
Over temperature Protection PAC1600T5453-CB - Self-recovery
Absolute maximum ratings
Operating ambient temperature PAC1600T5453-CB -5 - 55ºC -
Storage temperature PAC1600T5453-CB -40 - 70ºC -
Other characteristics
I2C communication PAC1600T5453-CB
Input power;Output voltage;
Air inlet temperature;Remote reset (10s);
Fault alarm:Fan failure alarm;
OTP alarm;
-
Impulse current PAC1600T5453-CB DM: 3kA, CM: 5kA -
Surge PAC1600T5453-CBLine to earth: ±6 kVLine to line: ±6 kV
IEC61000-4-5/ITU-TK.21
Mean time between failures (MTBF) PAC1600T5453-CB 0.25 million hoursTelcordia SR332, Vin=220VAC, 100% load, TA=25ºC
Specification
Features
• Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • I2C communication protocol • Hot swap • Suitable for the TT, TN, IT power
supply system • 1+1 redundant backup
54
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 55
COMMUNICATION CUSTOM POWER SERIES
Model Input Voltage Output Voltage Output Current Output Power Efficiency
PAC1600T5453-CB 100 - 240 VacVo1: 53.5VVo2: 52.5VVo3: 3.4V
22A/7.6A/7.6A
1600W 91.0%
Model Selector
Pin definition of J3:
Pin Definition Type Description
a1 CARDIN_PWR Output
Detect whether the power module securely connects to the system
backplane. If yes, pin a1 and pin c1 are short-circuited; if not, pin a1 and pin c1
are disconnected.
a2, a5, a9 NC N/A NC
a3 ISHARE+ Output Current share bus +
a4 ISHARE- Output Current share bus -
a6 - a8 Vout3 Output Output: 3.3 V
a10 I2C_SCK_PWR Output/Input I2C clock signal
a11 I2C_SDA_PWR Output/Input I2C data signal
b1 - b11 NC N/A -
c1 - c11 GND N/A GND
d1 - d11 NC N/A -
e1 - e8 Vout3 Output Output: 3.3 V
e9 - e10 NC N/A -
e11 CARDIN_PWR Output Same function as pin a1
Mechanical Diagram
Unit: mm [in.]
[0.856±0.007]
21.8±0.2
[0.3
15±
0.00
5]8.
0±0.
2
[1.8
11±
0.00
7]
46.0
±0.
2
[0.9
84±
0.00
3]25
.0±
0.1
[4.4
69±
0.00
3]11
3.5±
0.1 [0
.461
±0.
003]
11.7
±0.
1
[1.9
09±
0.00
3]
48.5
±0.
1
[1.2
80±
0.00
3]32
.5±
0.1
[0.4
67±
0.00
3]11
.9±
0.1
[0.6
30±
0.00
3]16
.0±
0.1
[0.4
67±
0.00
3]11
.9±
0.1
[7.2
36
]
+0.
007
-0.0
23
183.
8+
0.2
-0.6
[7.915 ]+0.000-0.015
[8.238 ]+0.011-0.015
209.3-0.4+0.3
201.1 0-0.4
155
05
05
Top View
Side View
15.9
±0.
1
[0.6
26±
0.00
3]
0.6±
0.1
[0.0
24±
0.00
3]
[1.6
34
]
+0.
000
-0.0
11
41.5
0 -0.3
Front View
[0.6
14±
0.00
7]
15.6
±0.
2
[7.614 ]+0.000-0.011
93.4 0-0.3
IN ON
OFF
29911619 PSU1600-AC
OUT
FAULT
Back View
J3 J2 J1
RTNRTN Vo2 RTN
Output Socket
edcba
11 1
Vo1
Tolerances±0.5[0.02in.] (≤63[2.48])±1.0[0.04in.] (>63[2.48])
Input connector: IEC 60320 C14Output socket: J1----FCI (10073379-001LF) J2----STARCONN (095U03-00410A-M9) J3----FCI (HM2R30PA5100N9LF)
55
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 56
COMMUNICATION CUSTOM POWER SERIES
Features
• Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • I2C communication protocol
PAC320D2805-CN Power Module
Introduction
PAC320D2805-CN cassette AC-DC power module has 90 to 290Vac wide input voltage, 28V and 5V dual outputs. The output voltage of 28V can be adjusted from 17V to 30.5V through the IIC bus. A radiator should be pasted to the shell for cooling. The module built-in 20KA lightning protection component, and surge protection to meet IEC61000-4-5 standard. Be suitable for the power supply of wireless base station.
Model Parameter Notes & Conditions
Output characteristics
Output voltage range PAC320D2805-CN17 - 30.5V
5.48 - 5.71V-
Output power PAC320D2805-CNVo1: 320WVo2: 75W
The whole range of Vin, Iout and TA, Po1+Po2<320W
Output line regulation PAC320D2805-CN 1%Vo Vin=90 - 290 VAC; Po=320W
Output load regulation PAC320D2805-CN 2%Vo Vin=220 VAC; Po=0 - 320W
Output ripple and noise (PK-PK) PAC320D2805-CNVo1@200mVVo2@50mV
Oscilloscope bandwidth: 20 MHz
Input characteristics
Operating input voltage PAC320D2805-CN 90 - 290 VAC@50/60Hz -
Maximum input current PAC320D2805-CN 7A Vin=220 VAC; Po=320W
Power factor PAC320D2805-CN 0.95 Vin=220 VAC; Po=320W
Protection characteristics
Input OVP PAC320D2805-CNTurn on: 290V ACTurn off: 295V AC
Hysteresis: 5.0V
Input UVP PAC320D2805-CNTurn on: 90V ACTurn off: 85V AC
Hysteresis: 5.0V
Output OVP PAC320D2805-CNVo1@36V
Vo2 hiccup while Vo1 OVPHiccup
Over current Protection PAC320D2805-CNVo12@18 AVo2@15 A
Hiccup
Over temperature Protection PAC320D2805-CN - Self-recovery
Absolute maximum ratings
Operating ambient temperature PAC320D2805-CN -40 - 45ºC -
Storage temperature PAC320D2805-CN -40 - 70ºC -
Other characteristics
I2C communication PAC320D2805-CN
Input power; Adjust output voltage;
Fault alarm; Remote power off;
-
Impulse current PAC320D2805-CN DM: 20kA, CM: 20kA -
Surge PAC320D2805-CNLine to earth: ±4 kVLine to line: ±2kV
IEC61000-4-5/ITU-TK.21
Mean time between failures (MTBF) PAC320D2805-CN 0.25 million hoursTelcordia SR332, Vin=220VAC, 100% load, TA=25ºC
Specification
56
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 57
COMMUNICATION CUSTOM POWER SERIES
Model Input Voltage Output Voltage Output Current Output Power Efficiency
PAC320D2805-CN 90 - 290 VacVo1: 28VVo2: 5.5V
11.43A13.67A
320W 91.0%
Model Selector
Mechanical Diagram
Unit: mm [in.]
Side ViewSide View
241.3 [9.50]
10-M3X6
38.2
[1.5
0]
95.5 [3.76]
11.1 [0.44]
37.6
[1.4
8]
Top View Side View
8.2
[0.3
2]
AC input: N L
14190148
14100077
23.9 [0.94]
5-4.0 [0.16]
6-1.1x1.1
95.5 [3.76]
106.6 [4.19]
37.6
[1.4
8]
14190148
14100077
1 1
DC Output Connector
Power GNDCommunication
Connector
Tolerances±0.5[0.02in.] (≤63[2.48])±1.0[0.04in.] (>63[2.48])
Input connector: N---SuZhou Huazhan (H18S) L---SuZhou Huazhan (H18P)
Output connector:DC output---Senda Zhejiang (VH-6A-B1-HW)Communication interface---Senda Zhejiang (SDW12502-8A-C-HW)Power GND---SuZhou Huazhan (H18P)
Pin definition of communication connector
Pin Definition Description
1 AC_DOWN AC input power off alarm
2 PWR_ID_1 Module identification ID_1
3 PWR_ID_0 Module identification ID_0
4 PWR_DWN_M Remote power off
5 GND Signal GND
6 PWR_I2CRS I2C reset control (remain high>700ms)
7 PWR_I2C_SDA I2C data signal
8 PWR_I2C_SCL I2C clock signal
Pin definition of DC output connector
Pin Definition Description
1 PWR_5V5 Output: 5.5V
2 PWR_5V5 Output: 5.5V
3 PWR_5V5 Output: 5.5V
4 V28 Output: 28V
5 V28 Output: 28V
6 V28 Output: 28V
Pin definition of J3:
57
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 58
COMMUNICATION CUSTOM POWER SERIES
Features
• Over current protection • Short circuit protection • Output overvoltage protection • Over temperature protection • I2C communication protocol • Hot swap • Suitable for the TT, TN, IT power
supply system • 1+1 redundant backup
PAC600S12-CE/CB Power Module
Introduction
PAC600S12 series cassette AC-DC power module have 90 to 290Vac wide input voltage, 12V and 3.3V dual outputs, total rating output power 600W. The module is configured with fan for cooling through a back-to-front airflow or the reverse direction. This series has two version, and the only difference is the airflow direction. Surge protection meet IEC61000-4-5 and ITU-TK.21 standard. Be suitable for switches, routers, access equipments, server, storage and so on, that need power supply of 12V.
Model Parameter Notes & Conditions
Output characteristics
Output voltage range ALL11.64 ~ 12.36V
3 - 3.8 V-
Output power ALL 12V@600W -
Output line regulation ALL 2%Vo Vin=90 - 264 VAC; Po=600W
Output load regulation ALL 3%Vo Vin=220 VAC; Po=0 - 600W
Output ripple and noise (PK-PK) ALL 12V@200mV Oscilloscope bandwidth: 20 MHz
Input characteristics
Operating input voltage ALL 90 - 290 VAC@50/60Hz -
Maximum input current ALL 7.8A Vin=220 VAC; Po=600W
Power factor ALL ≥0.95 Vin=220 VAC; Po=600W
Protection characteristics
Input UVP ALLTurn on: 90V ACTurn off: 85V AC
Hysteresis: 5.0V
Output OVP ALL 13.5 ~ 16V Hiccup
Over current Protection ALL 52 - 60A Hiccup
Over temperature Protection ALLE: 70ºCB: 60ºC
Self-recovery
Absolute maximum ratings
Operating ambient temperature ALL -25 - 55ºC -
Storage temperature ALL -40 - 85ºC -
Other characteristics
I2C communication ALL
Output voltage/current/power Electronic label
(Rating output power, Device type, Device name)
-
Surge ALLLine to earth: ±6 kVLine to line: ±6 kV
IEC61000-4-5/ITU-TK.21
Mean time between failures (MTBF) ALL 0.25 million hoursTelcordia SR332, Vin=220VAC, 100% load, TA=25ºC
Specification
58
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 59
COMMUNICATION CUSTOM POWER SERIES
Pin definition of output connector:
Pin Definition Description
P3 12V+12V output
P4 12VGND
D2 SHARE-12V12V output current sharing signal, when two modules working
in current sharing mode, this pin of each module should connect together
D3 PG-12VIndicator whether the 12V output voltage is OK
(H:OK, L:abnormal)
D4 3.3V3.3V power supply from the main board, giving I2C chip power
supply of module
D5 I2C-SDA I2C data signal
D6 I2C-SCL I2C clock signal
C4 A0 I2C E2PROOM address0
C5 A1 I2C E2PROOM address1
C6 PRESENTTo indicate to the system that the module is inserted in the power
bay. This pin has been shorted to the 12VGND in the module
B2 Alarm AC input power off or UVP alarm signal (H:OK, L:abnormal)
B3 3V3 Output: 3.3V/100mA
B4 WPWrite Protect: this pin should connected to 3.3V power supply
from the main board, using 12VGND
B6 A2 I2C E2PROOM address2
A3 SHARE-48V48V output current sharing signal, when two modules working
in current sharing mode, this pin of each module should connect together
A4 PG-48VIndicator whether the 48V output voltage is OK
(H:OK, L:abnormal)
A5 PSKILLHot swap signal, short pin, when this pin connect to the 12VGND
by the back board, the module be enable
P2 48V-48V output
P1 48V+(RTN)
Model Input Voltage Output Voltage Output Current Output Power Efficiency Notes
PAC600S12-CE 90 - 290 Vac 12V/3.3V 50A/0.1A 600W 90.5% E: back-to-front airflow
PAC600S12-CB 90 - 290 Vac 12V/3.3V 50A/0.1A 600W 90.5% B: front-to-back airflow
Model Selector
Mechanical Diagram
Unit: mm [in.]
90
.0 [
3.5
4] 195.5 [7.70]
204.7 [8.06]
22.3 [0.88]
57
.2 [
2.2
5]
16
.4 [
0.6
5]
5.0
[0
.20
]
4.0
[0
.16
]
8.0
Top View
100.7 [3.96]
99.0 [3.90]
43
.0 [
1.6
9]
35.1 [1.38]
4.0 [0.16]
38.0 [1.50]5.0 [0.20]
Front View
39
.6 [
1.5
6]
14
.6 [
0.5
7]
3.6
[0
.14
]
Side View Back View
90.0 [3.54]
93.4 [3.68]
Output Connector
HD
TM TM TM TM
HD
PART NUMBER ROWS POWER POWER
1 8 9 2 2 0 0 - 5
SIGNAL
DCBA
P 1 P 2 P 3 P 4 1
JKNS
JKNS
JKNS
JKNS
JKNS
JKNS
2 3 4 5 6
Tolerances±0.5[0.02in.] (≤63[2.48])±1.0[0.04in.] (>63[2.48])
Input connector: IEC 60320 C14Output connector: Tyco (1892200-5)
59
Huawei Embedded Power Supply Catalog | www.cdiweb.com/huawei | 1-800-777-7334Page 60
Copyright © Huawei Technologies Co., Ltd. 2014. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
General Disclaimer
The information in this document may contain predictive statements including,
without limitation, statements regarding the future financial and operating results,
future product portfolio, new technology, etc. There are a number of factors
that could cause actual results and developments to differ materially from those
expressed or implied in the predictive statements. Therefore, such information
is provided for reference purpose only and constitutes neither an offer nor an
acceptance. Huawei may change the information at any time without notice.
Trademark Notice
, HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the property of their respective owners.
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Version No.: M3-031424-20140425-C-2.0
www.huawei.com
CDI has expert engineers on sta� , ready to help you with your design and reduce your time to market.
CDI has online ordering and thousands of parts in stock to help you with your prototyping and ful� llment needs.
WEST REGIONNorthwestAK, HI, OR, WA(888) 734-9600 Toll-Free(425) 984-0196 [email protected]
Nothern CaliforniaNorthern Nevada(800) 536-9833 Toll-Free(408) 733-7044 Direct(408) 516-9769 [email protected]
Southern CaliforniaSouthern Nevada(800) 372-1580 Toll-Free(858) 535-0003 Direct(760) 897-2132 [email protected]
Rocky MountainAZ, CO, ID, MT, NM, UT, WY(800) 551-7357 Toll-Free(720) 962-5152 Direct (303) 265-9372 [email protected]
CENTRAL REGIONNorth CentralIA, IL, KS, MN, MO, ND, NE, SD, WI (866) 457-9430 Toll-Free(312) 873-3725 [email protected]
South Central / SouthAL, AR, LA, MS, OK, TN, TX (800) 848-4234 Toll-Free (972) 578-2644 Direct(214) 722-1577 [email protected]
SoutheastFL, GA, NC, SC, PR(800) 558-2351 Toll-Free (321) 724-9910 Direct (321) 729-6579 [email protected]
CORPORATE FACILITIESExecutive O� ce / IT2601 Blake Street, Suite 450Denver, CO 80205(303) 531-1800 Direct(720) 294-0998 Fax
Accounting(303) 531-1880 [email protected]
Sales Management(866) 851-5776 [email protected]
Warehouse7550 South Grant StreetLittleton, CO 80122
EAST REGIONOhio ValleyIN, KY, MI, OH(800) 931-8258 Toll-Free(703) 995-0929 [email protected]
NortheastCT, MA, ME, NH, NYRI, VT(800) 303-6440 Toll-Free (413) 771-0089 [email protected]
Mid-AtlanticDE, MD, NJ, PA, WVVA, DC(800) 293-2080 Toll-Free(703) 995-0929 [email protected]
NORTH AMERICACanada(877) 691-4121 Toll-Free(877) 565-9506 [email protected]
Mexico+1 (866) 851-5776 x4750 US Toll-Free+52 (33) 1524-1514 Direct+52 (33) 3335-5509 [email protected]
INTERNATIONAL SALESEurope / UK / Russia +1 (303) 357-2743 Direct +1 (321) 729-6579 [email protected]
Asia / China / Japan / AustraliaMiddle East / Israel+1 (800) 536-9833 Toll-Free (US)+1 (408) 733-7044 Direct+1 (408) 516-9769 [email protected]
Brazil / Central & South America+1 (303) 357-2740 (Español / English)+1 (303) 279-0305 (Português / English)+1 (312) 873-3725 [email protected]@cdiweb.com