Huawei B260 En
2
1 Port forwarding for Huawei B260 A so-called Port forwarding must be set up to make the Maginon IPC-1 surveillance camera accessible to the Internet when a Router firewall is active. The below instructions explain how to set up such a port forwarding for the router model “Huawei B260“. For this router model please also observe the note at the end of this description regarding the Internet connection! 1) Determine the local network address of your router. This can, for instance, be obtained using the supra IPCam Config program. Start a search whilst the IP camera is connected and then select “Address“. Use the address listed under Standard gateway. 2) Enter the local network address determined as per 1) in the address line of your brow- ser. This opens the Login window of the router. 3) Enter your user name and password for accessing the router, which can be found in the Instruction Manual of your router. The router is supplied with the user name and password both set to “admin”. 4) In the configuration menu of your router click left on the “Advanced Settings“ option and then on the right on “Virtual Server”. The following configuration view appears: 5) Enter the following: Protocol: Select „TCP“ or „TCP/UDP“. Name: Any name can be entered. IP Address: Local network address of Maginon IPC-1, provided by the supra IPCamConfig program. With the IP camera switched on, start a search and then select “Address“. Use the address which is shown under IP addresst. Common Port: Leave default settings. Status: Select “On”. WAN Port: Enter value “81”. (*) LAN Port: Also enter value “81”. (*)
description
Huawei B260 En
Transcript of Huawei B260 En
1
Port forwarding for Huawei B260A so-called Port forwarding must be set up to make the Maginon IPC-1 surveillance camera accessible to the Internet when a Router firewall is active. The below instructions explain how to set up such a port forwarding for the router model “Huawei B260“.
For this router model please also observe the note at the end of this description regarding the Internet connection!
1) Determine the local network address of your router. This can, for instance, be obtained using the supra IPCam Config program. Start a search whilst the IP camera is connected and then select “Address“. Use the address listed under Standard gateway.
2) Enter the local network address determined as per 1) in the address line of your brow-ser. This opens the Login window of the router.
3) Enter your user name and password for accessing the router, which can be found in the Instruction Manual of your router. The router is supplied with the user name and password both set to “admin”.
4) In the configuration menu of your router click left on the “Advanced Settings“ option and then on the right on “Virtual Server”. The following configuration view appears:
5) Enter the following: Protocol: Select „TCP“ or „TCP/UDP“. Name: Any name can be entered. IP Address: Local network address of Maginon IPC-1, provided by the supra IPCamConfig program. With the IP camera switched on, start a search and then select “Address“. Use the address which is shown under IP addresst. Common Port: Leave default settings. Status: Select “On”. WAN Port: Enter value “81”. (*) LAN Port: Also enter value “81”. (*)
2
6) Finally click on “Apply“.
7) Open the configuration page of the Maginon IPC-1. Start a search whilst the camera is connected and then click on “Browser“.
8) Enter the user name and password for the Administrator. The default setting for the Maginon IPC-1 is the user name “admin“, which does not require a password.
9) Select the “Settings“ option from the screen and then “Network settings“.
10) In the last field change the value for “Port of Web interface“ to value “81“. (*)
11) Click on ”Save” and restart the camera.
12) You can then reach the camera via the public IP address of your router with the suffix “:81“. If the public IP address of your router is, for instance ”179.128.19.27“, you can reach your camera from the Internet at ”http://179.128.19.27:81“. (*)The current public IP address of the router can be determined at any time from http://su-pracam.net/ip.aspx.
13) If you have set up a new DDNS address through supracam.net this will be updated automatically.
(*) Instead of target port ”81 “ you can also use any other port than “80“. This would then have to be taken into consideration in the above points 5), 10) and 12).
Please do not hesitate to contact our Service-Hotline in case of any queries.
Note:• IfyourInternetconnectionisviaa3Gnetwork(mobilenetwork),yourInternet access generally does not have a public IP address. As a public IP address is, however, required for accessing the camera, you will have to contact your Internet provider first and request allocation of a public IP address for your Internet access.
