HSV series - Jarecki · PDF file · 2016-02-04requires one complete flexitallic...
-
Upload
nguyenphuc -
Category
Documents
-
view
218 -
download
1
Transcript of HSV series - Jarecki · PDF file · 2016-02-04requires one complete flexitallic...
HSV SERIESHSV SERIES
The Jarecki HSV Series are severe service ball valves made from heavy walled American castings.
They provide the tightest shuttoff for the longest period of time in very sever applications. The
HSV is designed and built to withstand temperature fluctuations, pressure surges, and abrasion
better than any other valve on the market.
Two Piece Ball and Stem
• Allows for effective sealing against back
pressure
• Ease of disassembly and repair
Unique Seat Design
• Guards seat seal from sudden pressure
surges
• provides for long lasting, positive shut-off
Tight Shut-Off
• Class V shut-off is our standard
• Class VI available upon request
One Source Supplier
• Jarecki produces 1/2" to 24" ball valves
• Metal and soft seated ball valves
• Valves in pressure classes 150# to 4500#
• Supplier of actuation and the required
coupling
Superior Quality Control
• On every valve, both a hydrostatic test and
a seat leakage test are performed
Impressive Stem Design
• Our stems will withstand high torque in
rough applications without shearing.
• Blow-Out proof design insures workman
safety
Quick Deliveries
Valve Rebuilding
• Send almost any style or make of valve
to our rebuilding department for
inexpensive valve repair
• Jarecki Valves can convert TFE seated
ball valves to metal seated ball valves
Packing Design
• Long lasting adjustable packing helps
insure a leak free environment
• Superior packing design protects packing
from extrusion and flow media, adding to
longer sealing life.
Gland bearing prevents
lateral stem movement while
stroking the valve, extending
valve stem packing life.
INDUSTRIESINDUSTRIES
Power PlantsPower Plants
Fly Ash Service: The CF8M Castings contain a specific ferrite content for high temperature service.
They are proven in the field up to 1700 Deg F.
Pulp & PaperPulp & Paper
Green Liquor, White Liquor, Chlorine: The heavy duty body and body bolting eliminate any
negative effects of piping stress. The competition uses two identical body halves with a stem ball.
This requires two seals, a thin C-Shaped body gasket, and a bonnet gasket. The Jarecki Valve only
requires one complete flexitallic body gasket, reducing the chance of body leakage. A two piece
ball and stem is used to minimize stem packing leakage.
Chemical IndustryChemical Industry
Emulsions, Acids, Caustics: The HSV Series is available in a number of exotic alloys for a variety
of different applications.
Oversized bolting is used to provide strength to the two-piece
body design. Metal to metal contact between the tailpieces and
the body, along with a tailpiece locator eliminate piping stresses
on the body gasket which lead to leakage.
Live loaded packing system keeps compression on stem packing during temperature and pressure cycles
G Seal G Seal -- Graphite Sealed SeatGraphite Sealed Seat
A series of Graphite seal rings behind the metal seat,
coupled with a Graphite outer diameter seat seal,
prevent media from building up behind the seat. The
rings also allow for expansion of the internal valve
components in high temperature applications.
Temperature Range: 200 to 1200 deg F
Application: Steam, Abrasion, High Temperatures,
Fine Solids
Shut-Off: Class V
O Seal O Seal -- Graphite Sealed SeatGraphite Sealed Seat
A double seal design providing both spring loading
and excellent sealing capabilities. There is no area
for media to build up behind the seat, which prevents
the valve from locking up.
Temperature Range: -150 to 650 deg F
Application: Steam, Abrasion, Low Pressure
Differentials, Fine Solids, Emulsions
Shut-Off: Class V, Class VI, Bubble Tight
P Seat P Seat -- Spring LoadedSpring Loaded
For unidirectional applications. The sealing seat is
available as a separate seat ring for reparability, or
integral with the tailpiece for high temperature
applications. The spring seat OD seal prevents
media from building up between the spring and the
back of the seat.
Temperature Range: 400 to 1650 deg F
Application: Steam, Low Pressure Differentials,
High Temperatures
Shut-Off: Class V, Class VI, Bubble Tight
T Seat T Seat -- Reinforced TFE SeatReinforced TFE Seat
A glass filled TFE is used typically used for most
applications. A metal filled TFE Seat is available for
increased abrasion resistance and reduction to cold
flow. The metal filled seat is excellent for tight sealing
in higher pressure classes without the need of a
trunnion mounted valve.
Temperature Range: -250 to 450 deg F
Application: Steam, Low Pressure Differentials,
Emulsions, Nonabrasive Media
Shut-Off: Bubble Tight
SPECIFICATIONSSPECIFICATIONS
ANSI B16.34
ANSI B16.10
ANSI B16.5
ANSI/FCI 70-2-1976
*Jarecki Valves Can Comply With The Above Specifications Per Request
*NACE MR-01-75
*API 607
*API 598
*MSS-SP-72
SEAT STYLESSEAT STYLES
GRAFOIL GRAFOIL
SIZE A B (Dia) C D E F (Dia) N W (Dia) S (Dia) CV WEIGHT
1/2 4.25 0.59 1.79 5.32 3.23 3.50 4 0.63 2.38 15 5
3/4 4.60 0.79 2.01 5.32 3.39 3.85 4 0.63 2.75 40 7
1 5.00 0.99 2.05 6.50 3.86 4.25 4 0.63 3.13 70 10
1 1/2 6.50 1.58 2.52 7.87 4.69 5.00 4 0.63 3.88 240 17
2 7.00 2.00 3.07 7.87 5.04 6.00 4 0.75 4.75 400 23
3 8.00 2.99 3.74 15.00 7.38 7.46 4 0.75 6.00 980 50
4 9.00 4.00 4.47 15.00 7.88 9.02 8 0.75 7.50 1,700 80
6 15.50 5.98 7.76 28.80 8.63 10.98 8 0.87 9.55 5,000 142
8 18.00 7.81 8.35 28.80 11.44 13.50 8 0.87 11.75 10,000 300
10 21.00 9.84 10.47 38.00 14.38 15.98 12 1.00 14.25 15,000 515
12 24.00 11.81 12.01 38.00 16.13 19.02 12 1.00 17.00 21,000 720
ANSI CLASS 150
No Description Carbon Steel Stainless Steel
1 Body wcb216 cf8ma351
2 Tailpiece wcb216 cf8ma351
3 Ball 316 sst 316 sst
4 Seat rtfe or stellite rtfe or stellite
5 Body Gasket tfe or grafoil tfe or grafoil
6 Stem 316sst/17-4sst 316sst/17-4sst
7 Thrust Washer tfe/stellite tfe/stellite
8 Stem Packing tfe/grafoil tfe/grafoil
9 Snap Ring sk5 sk5
10 Gland carbon Steel 304 sst
11 Belleville carbon Steel 17-4 sst
12 Retainer Nut a194 gr 2h a194 gr 8m
13 Lock Washer 304 sst 304 sst
14 Lever ductile Iron ductile Iron
15 Bolt,Body Stud a193 gr b7 a193 gr b8m
16 Stop Plate carbon Steel 304 sst
17 Body Nut a194 gr 2h a194 gr 8m
18 Lever Stop carbon Steel 304 sst
Valve Sizes ½” to 2”Valve Sizes ½” to 2”
Valve Sizes 3” to 12”Valve Sizes 3” to 12”
SIZE A B (Dia) C D E F (Dia) N W (Dia) S (Dia) CV WEIGHT
1/2 5.50 0.59 2.64 5.32 3.23 3.75 4 0.63 2.63 15 6
3/4 6.00 0.79 2.51 5.32 3.39 4.63 4 0.75 3.25 40 8
1 6.50 0.99 2.56 6.50 3.86 4.87 4 0.75 3.50 70 12
1 1/2 7.50 1.58 2.76 7.87 4.69 6.13 4 0.88 4.50 240 21
2 8.50 2.00 3.20 7.87 5.04 6.50 8 0.75 5.00 400 36
3 11.12 2.99 5.57 15.00 7.38 8.25 8 0.88 6.63 980 55
4 12.00 4.00 5.97 15.00 7.88 10.00 8 0.88 7.88 1,700 93
6 15.88 5.98 7.60 30.00 8.63 12.50 12 0.88 10.63 5,000 237
8 16.50 7.81 9.33 30.00 11.44 15.00 12 1.00 13.00 10,000 440
10 22.38 9.84 12.28 38.00 14.38 17.50 16 1.25 15.25 15,000 715
12 25.50 11.81 12.75 38.00 16.13 20.50 16 1.25 17.75 21,000 985
ANSI CLASS 300
HSV SERIESHSV SERIES