HSN8500NA PRODUCT OVERVIEW

HSN8500NA is a member of the cost-e!ective and highly scalable

product line. This system is generally deployed in central

o"ces or BBU hotels. Like the other systems in the #exiHaul product

line, HSN8500NA has a #exible, pay-as-you-grow architecture with

plug-in service cards, thereby allowing the customer the ability

to choose any combination of supported services as well as

facilitate easy operation and maintenance. This 8U shelf includes

twenty service slots used to transport di!erent fronthaul services

via CWDM / DWDM over dark $ber.

HSN8500NA serves as an aggregator for the full #exiHaul line-up

where the following serve as remote terminals :

HSN8300NA, and HSN8100NA.

HSN8500NA supports point to point, linear chain, point to multi-point

and ring with ring protection. In addtion, HSN8500NA is e"ciently

managed by EMS, which provides the necessary tools for both tra"c

provisioning and overall system monitoring.

. CPRI fronthaul interface in C-RAN architecture between BBU and RRHs

. Ethernet backhaul interface for distributed RAN architecture

. Wavelength switching, grooming and aggregation

PRIMARY APPLICATION

al

ct

int

[HSN8500NA]

. Multi-protocol support

KEY FEATURES

. High scalability (Max. 80 ports CPRI)

. Plug-in architecture: any module in any slot

. Alarms, statistics, performance monitoring

. Remote management via optical supervisory channel (OSC)

. Local / remote logical loopbacks

. Connectivity, signal level, delay, distance measurement

ARCHITECTURE

OAM and MAINTAINABILITY

- CPRI (option 2, 3, 5, 7), GbE

. Supports 1 or 2 rings

. 4 x CPRI muxing into a 10 Gbps line

. CPRI delay (one-way, 2 modules without FEC)

- Transponder < 1 ㎲ - Muxponder < 3 ㎲

. Jitter : less than ± 0.35 UI

. Ring protection switching less than 50 ms

- Delay equalization for ring protection

. FEC (Forward Error Correction) support

. Topology : point to point, linear chain, ring, point to multi-point� � � � � � � � � � �

� � �� � � � � � � � � � � � �� � � � � � � � � �

HSN8500NA SYSTEM SPECIFICATION

Service slots 20

CPRI capacity Up to 80 channels

CWDM / DWDM ITU-T G.694.1, ITU-T G.694.2

Transmission distance Up to 20 km

Service interface CPRI (option 2, 3, 5, 7), GbE

Optical connector type

Muxponder

Topology

Power

Environmental

Humidity : Up to 85% (non-condensing)

Switching time < 50 ms

Con�guration Non-revertive switching, revertive switching

Operating mode Automatic, manual

Fault control Alarm severity : Critical, Major, Minor, Warning

Test function Local / remote loopback

Delay measurement

System Capacity

Configurations / Power / Environmental

Protection / Switching

OAM

Channel Interface

Muxponder / Multi-rate transponder

BERT

Classi�cation level Unit, Module, Port

2 ports CPRI (option 5)

Multi-rate transponder 4 ports CPRI (option 3, 5, 7)

Visual LED Indicators System activity, system failure, ACO,

Alarms status (Critical, Major, Minor)

Environmental and O!ce Alarms 7 Housekeeping inputs

6 O!ce Alarm outputs

Operation EMS (server, client), Local Craft Terminal

Protocols SNMPv2 / v3

Physical interface

Dimension

Power consumption 680 W (Fully loaded)

355 (H) x 481 (W) x 300 (D) mm

Network Management

Physical Characteristics

Regulatory & Compliance

Weight

TTU4G (4-Port basic transponder)

Type

Protocols

Client / WDM ports 4 / 4

Performance monitoring SFP/SFP+ DDM

Performance monitoring SFP/SFP+ DDM, BIP, ES, SES, UAS

Line monitoring LOS

CPRI / Line monitoring LOS, LOF, CV, BIP, AIS, RDI

Performance monitoring SFP/SFP+ DDM, BIP, ES, SES, UAS

CPRI / Line monitoring LOS, LOF, CV, BIP, AIS, RDI

CPRI delay (one-way) < 0.5 ㎲

OTU4G (4-Port enahnced transponder)

Pro�le

Type

Protocols

Client / WDM ports 4 / 4

FEC Support

Delay Equalization Support

Delay Equalization Support

CPRI delay (one-way) < 0.5 ㎲ (without FEC)

ATU10F (4-Port muxponder)

Main Control Unit (MCU)Type Main Control Process Unit

Console port RS-232C x 1 port

Management port 100 / 1000 Base-TX x 2 ports (WAN)

Shelf Extension & Local Management Port(LMP)

LEDs System activity, system failure

System alarm LED : CRI / MAJ / MIN / ACO

WAN/LAN status : Act, Link

100 / 1000 Base-TX x 2 ports (LAN)

CPRI 3/5/7 x 4 ports (any rate mix) or

Type CPRI 3/5/7 x 4 ports (any rate mix) or

Protocols Client side : CPRI (option 2, 3, 5), GbE

WDM side : 10 Gbps

Client / WDM ports 4 / 1

FEC Support

CPRI delay (one-way) < 1.5 ㎲ (without FEC)

Supported Service Modules

Data Communiction Unit (DCU) Type Data Communication Unit

OSC ports 6 ports

LEDs Unit status, Link status

Performance monitoring 15 min, 1 day

27.05 kg

FCC Part 15 Class A

CE Mark

UL 60950-1, IEC 60950-1

IC (Canada EMI)

CB

NEBS Level 3

ATT-TP-76200, Issue 19, June 2014

VZ TPR 9205, Issue 5, Octorber 2011

CPRI 3/5/7 x 3 ports (any rate mix) + GbE x 1 port

Low latency pro�le

Standard OAM pro�le

High link budget pro�le (FEC enabled)

CPRI 2/3 x 4 ports or

CPRI 2/3 x 2 ports + GbE x 2 portsCPRI 2/3 x 3 ports + GbE x 1port

CPRI 5 x 2 ports CPRI 2/3 x 2 ports + CPRI 5 x 1 port

CPRI 3/5/7 x 3 ports (any rate mix) + GbE x 1 port

CPRI (option 3, 5, 7), GbE

CPRI (option 3, 5, 7), GbE

LC / UPC

4 ports CPRI (option 2, 3)

Point to point, linear chain, point to multi-point, ring

- 48 V DC ( - 40 ~ - 56 V DC)

+ 24 V DC ( + 20 ~ + 28 V DC)

Operating : - 5 °C ~ + 55 °C , Storage : - 40 °C ~ + 70 °C

10 / 100 / 1000 Base-TX

19” or 23” rack mountable

Support proudly provided by Fujitsu Network Communications, Richardson Texas

For more information, please contact your Fujitsu Sales Representative Fujitsu Network Communications, Inc.

2801 Telecom Parkway, Richardson, TX 75082 Tel : 888.362.7763 us.fujitsu.com/telecom