HS-CE-M Connection Enclosure · Options (if required) C - Compact design. H. Product Prefix. HS -...
1
Options (if required) C - Compact design H Product Prefix HS - Hansford Sensors S C E X X X X X X Product Series CE - Connection Enclosure Options (BNC as default) TNC - Output: TNC Connector X C B1 B A A1 ø10mm dimensions to be specified in ‘how to order’ table HS-CE-M Connection Enclosure Painted Mild Steel Material Dimensions Sealing Mild Steel painted RAL 7042 as standard see: ‘How To Order’ table IP66 How To Order Key Features • Provides a terminal to take readings from accelerometers via a portable data-collector • Multiple outputs via multiple connectors Technical Performance www.hansfordsensors.com [email protected] We reserve the right to alter the specification of this product without prior notice TS111.5 Door Glanding Labelling Mounting EMC Twist Handle Glands supplied but not fitted Holes are punched for: Single input M12 - ø3.5-7mm cable Single input M20 - ø7-13mm multi-core cable Multi input M20 - 3 x ø5.3mm Channel locations - other labelling available upon request supplied are 4 x Brackets EN61326-1:2013 Inputs Output Mounting Board Via accelerometer BNC as standard ( TNC as alternative) PCB Panel Termination Klippon Type Channels Dimensions (in mm) A B C A1 B1 001-012 009-024 200 x 200 x 150 (250, 160) 200 x 300 x 150 (250, 210) (others available on request) M M - PCB Board Connection
Transcript of HS-CE-M Connection Enclosure · Options (if required) C - Compact design. H. Product Prefix. HS -...
Options (if required)C - Compact design
H
Product PrefixHS - Hansford Sensors
S C E X X X X X X
Product SeriesCE - Connection Enclosure
Options (BNC as default) TNC - Output: TNC Connector
X
C B1B
AA1
ø10mm
dimensions to be specified in ‘how to order’ table
HS-CE-M Connection EnclosurePainted Mild Steel
Material
DimensionsSealing
Mild Steel painted RAL 7042 as standard
see: ‘How To Order’ tableIP66
How To Order
Key Features• Provides a terminal to take readings from
accelerometers via a portable data-collector• Multiple outputs via multiple connectors
Technical Performance
We reserve the right to alter the specification of this product without prior notice
TS111.5
DoorGlanding
Labelling
MountingEMC
Twist HandleGlands supplied but not fitted
Holes are punched for:Single input M12 - ø3.5-7mm cable
Single input M20 - ø7-13mm multi-core cableMulti input M20 - 3 x ø5.3mm
Channel locations - other labelling available upon request
supplied are 4 x BracketsEN61326-1:2013
InputsOutputMounting Board
Via accelerometer BNC as standard (TNC as alternative)
PCB Panel
Termination Klippon Type
Channels Dimensions (in mm)A B C A1 B1
001-012009-024
200 x 200 x 150 (250, 160) 200 x 300 x 150 (250, 210)
(others available on request)
M
M - PCB Board Connection
