USE & CARE MANUALTHISAIR CONDITIONER IS EQUIPPED WITH A NEW INDUSTRY

STANDARD POWER SUPPLY CORD WITHATEST-RESET FUNCTION

READAND SAVE THESE INSTRUCTIONS

!"HRU- HE-WAAIR CONDITIONER

3 SPEED ELECTRONIC CONTROL

P/N:819042072-01

ROOM AIR CONDITIONER WARRANTYYour product is protected by this warrantyYourappliance is warranted by Electrolux, Electroluxhas authorized FrigidaireConsumer Services andtheir authorized servicerstoperform service under this warranty. Electrolux authorizes no one else to change or add to any of these obligations under thiswarranty. Any obligations for service and parts under this warranty must be performed by Frigidaire Consumer Services or anauthorized Frigidaire servicer.

WARRANTY FRIGIDAIRE, THROUGH ITS THE CONSUMERWILLBEAUTHORIZED SERVICERS,WILL RESPONSIBLE FOR:

FULL ONE-YEAR One year from original Pay all costs for repairing or replacing Costs ofservicecallsthatarelisted underWARRANTY purchase date. 3artsofthisappliancewhich provetobe NORMAL RESPONSIBILITIES OF THE

defective in materials or workmanship. CONSUMER.*

LIMITED 2-5 YEARWARRANTY (Sealedsystem)

Second through fifthyears from originalpurchase date.

Repair or replaceany parts inthe SealedRefrigeration System (compressor,condenser,evaporator and tubing)proves to be defective in materials orworkmanship.

Diagnostic costs and any removal,transportation and reinstallation costswhich are required because of service.

Costs for labor, parts and transportationother than with respect to the SealedRefrigeration System.

LIMITED WARRANTY Time periods listed All of the provisions ofthefullandlimite( Costs of the technician's travel to the(Applicable to the above, warranties above and the exclusions home and any costs for pick up andStateofAlaska) listed below apply, delivery of the appliance required

because of service,

*NORMALRESPONSIBILITIESOF THE CONSUMER

This warranty applies only to products in ordinary household use, and the consumer isresponsible for theitems listed below.1. Proper use of the appliance in accordance with instructions provided with the product.2. Proper installation by an authorized servicer in accordance with instructions provided with the

appliance and inaccordancewithalllocalplumbing, electricaland/or gas codes.3. Proper connection to a grounded power supply ofsufficient voltage, replacement ofblownfuses,

repair of loose connections or defectsin house wiring.4. Expenses for making the appliance accessible for servicing, such as removalof trim, cupboards,

shelves, etc., whichare not apart oftheappliancewhen itwasshipped fromthefactory.5. Damages tofinish after installation.

EXCLUSIONS

IFYOUNEED SERVICE

This warranty doesnot cover thefollowing:1. CONSEQUENTIALOR INCIDENTAL DAMAGESSUCH ASPROPERTY DAMAGEAND INCIDENTAL

EXPENSES RESULTING FROMANYBREACHOFTHISWRITTENORANYIMPLIEDWARRANTY.Note: Some statesdo not allowthe exclusion orlimitation of incidentalor consequential damages, sothis limitation orexclusion may notapply to you.

2. Service callswhich do notinvolve malfunction ordefects in workmanshipor material, orfor appliancesnot in ordinaryhousehold use. The consumer shall pay for such service calls.

3. Damagescausedbyservices performedby persons other than authorized Frigidaireservicers;useof parts other than Frigidaire Genuine Renewal Parts; obtained from persons other than suchservicers; orexternalcauses suchasabuse, misuse, inadequatepowersupplyoractsofGod.

4. Products with original serial numbers that have been removed or altered and cannot bereadilydetermined.

5. Handling damageto the unitafter removal from packaging.

Keep your bill of sale, delivery slip, or some other appropriate paymentrecord. Thedateonthebillestablishes the warranty period should service be required. Ifservice is performed,it isinyour bestinterest to obtain and keep allreceipts. This written warrantygivesyouspecificlegalrights. You mayalso have other rights that vary from state tostate. Service underthiswarrantymustbeobtained byfollowing these steps,in order:1. Contact FrigidaireConsumer Services oran authorized Frigidaireservicer.2. If there is a question as to where to obtain service, contact our Consumer Relations Department at::

FrigidaireP.O. Box 212378Augusta, GA30917

800-444-4944

Product features orspecifications as described or illustrated aresubject to changewithout notice.All warranties aremade by Electrolux.This warranty appliesonly in the50 states ofthe U.S.A., Puerto Rico and Canada.

Product Registration Record Your Modeland Serial NumbersRecord in thespace provided belowthe model andserial numbers. Onall models, theserialplate is located on the outsideof the cabinet.

Model Number

Serial Number

Register Your ProductThe self-addressed PRODUCT REGISTRATION CARD should be filled in completely,signed and returnedto the FrigidaireCompany.

Contents 2 Warranty

NOTE: This USE & CARE MANUALprovides specific operating instructionsfor your model. Use the room airconditioner only as instructed in thisUSE & CARE MANUAL. Theseinstructions are not meant to coverevery possible condition and situationthat may occur. Common sense andcaution must be practiced wheninstalling, operating, and maintainin_any appliance.

3 Product Registration

3 Normal Sounds

4 Important Safety Instructions

4 Energy Saving Ideas

5 Operation of Current Device

5-10 Air Conditioner Features

10 Care and Cleaning

11 Avoid Service Checklist

Normal Sounds

High Pitched ChatterToday's high efficiencycompressorsmay have a high pitched chatterduring the coolingcycle.

VibrationUnit may vibrate and make noisebecause of poor wall or windowconstruction or incorrect installation.

Sound of Rushing AirAtthefrontofthe unit,you mayhearthe sound of rushing airbeing moved bythefan.

Gurgle/Hiss"Gurgling or hissing" noise may behearddue to refrigerant passing through theevaporator during normal operation.

Pinging or SwishingDroplets of water hitting thecondenser during normaloperation may cause "pingingor swishing" sounds.

Important SafetyInstructions

The power supplycord withthis air conditioner contains a currentdetection device designed to reduce therisk offire.

Please referto the section 'Operation ofCurrent Device'for details.Intheeventthatthe power supply cord isdamaged, itcannot be repaired it must bereplaced with a cord from the ProductManufacturer.

Avoid fire hazard orelectric shock. Do not use an extension

cord or an adaptor plug. Do not removeany prong from the power cord.

Grounding type wallreceptacle

_DDo not, under any_

circumstances, cut,/ remove, or bypass)

_he grounding pronq/

Power supply cordwith 3-prong groundingplug and currentdetection device

Read all instructions before using thisair conditioner.

For Your SafetyDo not store or use gasoline or otherflammable vapors and liquids inthe vicinityof this or any other appliance. Read product labels forflammability and otherwarnings.

Prevent Accidents

To reduce the risk of fire, electrical shock, or injury to persons whenusing your air conditioner, follow basic precautions, including thefollowing:• Be sure the electrical service is adequate for the model you have

chosen. This information can be found on the serial plate, which islocated on the side of the cabinet and behind the grille.

• If theair conditioneris to be installed in a window, you will probablywant to clean both sides of the glass first. If the window is atriple-tracktype with a screen panel included, remove the screen completelybefore installation.

• Be sure the airconditioner has been securelyand correctly installedaccording to the separate installation instructions provided with thismanual. Save this manual and the installation instructions forpossible futureusein removing orreinstalling this unit.

• When handling theair conditioner, be careful toavoid cuts fromsharpmetal fins onfront and rearcoils.

Electrical Information

The complete electrical rating of yournew room airconditioner is statedon the serial plate. Refer to the rating when checking the electricalrequirements.• Be sure the air conditioneris properly grounded. To minimize shock

and fire hazards, proper grounding is important. The power cord isequipped with athree-prong grounding plug and acurrentleakagedetection device forprotection against shock& firehazards.

• Your air conditioner must be used in a properly grounded wallreceptacle. If thewall receptacleyouintendtouseisnotadequatelygrounded or protected by a time delay fuseor circuit breaker, haveaqualified electrician install the proper receptacle.

• Do notrun air conditioner with outside protective cover in place. Thiscould result in mechanical damage within the airconditioner.

• Do not usean extension cordor an adapterplug.

Energy Saving Ideas

EN• Donot block inside air flowwith blinds, curtainsor furniture; or

outside with shrubs, enclosures, or other buildings.• The capacity of the room air conditioner must fit the room size for

efficient and satisfactory operation.• Install the room air conditioner on the shady sideofyour home. A

window thatfaces north is best because it is shaded most of the day.• Close the fireplace damper, floorandwallregisters so coolair does

not escape upthe chimney andinto the ductwork.• Keep blinds and drapes in other windows closed duringthe sunniest

part of the day.• Clean the air filteras recommended in the section "Care and Cleaning"• Proper insulation and weatherstrippingin your home will help keep

warm airout and cool airin.• External house shadingwith trees, plantsor awnings will help reduce

the airconditioner work load.• Operate heat producing appliances such as ranges, washers, dryers

and dishwashers during the coolest part of the day.

To reduce the risk of fire, electric shock, orinjury to persons, read theIMPORTANTSAFETY INSTRUCTIONS before operating thisappliance.

i he power supplycord contains acurrent device thatsenses damage tothe power cord. To

Operation of Current test your power supply cord dothe following:1. PlugintheAirConditioner.

Device 2. Thepower supplycordwillhaveTWO buttons onthe plug head. Press theTEST button.Youwill notice aclick as theRESET button pops out.

3. Press theRESET button. Again youwill notice aclick as thebutton engages.4. The power supply cord is now supplying electricity to the unit. (On some products this is

also indicated bya light onthe plug head).

NOTES:• Do not usethis device toturn the unit on oroff.• Always make surethe RESET button is pushed in for correctoperation.• The power supplycord must be replaced if itfails to resetwhen either the TEST button is

pushed, or itcannot be reset.Anew one can be obtained fromthe product manufacturer.• If power supply cord is damaged, it CANNOT be repaired. It MUST be replaced by one

obtained from theDroduct manufacturer

Air Conditioner ELECTRONIC CONTROL OPERATING INSTRUCTIONSBefore you begin, thoroughly familiarize yourself with the controlpaneland remoteasFeatures shown below and all its functions, then follow the symbol for thefunctions you desire.

The unit can be controlled bythe control panelalone or withthe remote.CONTROL PANEL

CHECK FILTER SLEEP ADJUSTS TURNS UNITRESET BUTTON MODE TEMPERATURE ON OR OFF

OR TIME

SETS ACTIVATES SETS FANMODE TIMER SPEEDS

REMOTE CONTROLTURNS UNIT_ON OR OFF

SETS FAN _SPEEDS

ACTIVATES _

TIMER

SLEEP MODE

MODE

ADJUSTSTEMPERATUREOR TiME

Air Conditioner Features(continued)TO TURN UNiT ON:

DO THIS: ]PRESS ON/OFF PAD

TO CHANGE TEMPERATURESETTING:

DO THIS:PRESS TORAISE

PRESS TOLOWER

TOAD JUST FAN SPEEDS:

DO THIS:PRESS TOSELECT:

LOW,MED or HIGH

NOTE: The following instructions represent theControl Panel, thesameinstructions can beused for theRernote Control.

YOU WILL SEE:

YOU WILL SEE:

NOTE: Tap or hold either up( -_ ) or down ( _ ) button until thedesired temperature is seen on the display, This temperaturewill be automatically maintained anywhere between 60°F(15°C)and 90°F(32°C), If you want the display to read the actual roomtemperature, See " To Operate on Fan Only" section on Page7.

YOU WILL SEE:

The chosenfan speed LED will light up.

Air Conditioner Features(continued)TO USE AUTO COOL FEATURE:

DO THIS:PRESS TO

SELECTAUTO

YOU WILL SEE:

ON

)f

NOTE: Fan starts at High Speed and adjusts to a slower speedas the room temperature dictates, For example if the room doesnot get too warm, it will stay at the slowest speed, If the roomtemperature rises quickly, such as a door being opened, it willautomatically go to the highest speed, The fan speeds willre-adjust back to the slowest speed as the room returns to theoriginal set temperature, Press the fan button to adjust the fanspeed manually,

TO OPERATE ON FAN ONLY:

H

DO THIS:PRESSMODE

BUTTONCHOOSE

FAN

YOU WILL SEE:

NOTE: Use this functiononly when coolingis not desired,suchas for roomair circulation otto exhaust staleair, (Remember toopen vent during this function, but keep it closed during coolingfor maximum cooling efficiency,) You can choose anyfan speedyou prefer,During this function, the display will show the actual roomtemperature, notthe set temperature asin the cooling mode,During this function, the display will show the actual roomtemperature, not the set temperature as in the cooling mode,

TO USETHE ENERGYSAVERFEATURE: YOU WILLSEE:

DO THIS:PRESS MODE BUTTON

CHOOSEENERGYSAVER

LIGHTON

NOTE:In this mode, the fan will continuetorunfor3minutesafter the compressor shuts off, The fan then cycles on for 2minutes at 10 minute intervals until the room temperature isabove the set temperature, at which time the compressorturns back onand cooling starts,

Air Conditioner Features(continued)TIMER: DELAY STOP/START FEATURE: YOU WILL SEE:

LIGHT ON

DO THIS:PRESS TIMER

BUTTON

THEN DO THIS:

PRESS UP(_ )ORDOWN (_)BUTTON

NOTE: For Delay Stop, the unit must be in the ON position.NOTE: For Delay Start, the unit must be in the OFF position. To adjusttimer setting, tapor hold theUP arrow(<_ ) orthe DOWN arrow(_) tochange delay timer at .5 hour increments, up to 10 hours, then at 1 hourincrements up to 24 hours. The control will count down the timeremaining until start (8, 7.5, 7,etc.). The Delay Start mode automaticallyselects cooling at High Fan Speed. The temperature maintained will bethe same as previously set. To change the set temperature, press"COOL " then Up or Down arrows until the desired temperature isindicated on the display. After 5 seconds, the control will automaticallychange the displayback to thehours remaining untilthe unit willstart/stop.

Turning the unit "ON" or "OFF" at any time will cancel the Delay Start/Stopfunction.

SLEEP FEATURE:

DO THB:PRESSSLEEP

BUTTON

CHECK FILTER FEATURE:

i_!i!iii

LIGHT ON

YOU WILL SEE:

NOTE: In this" MODE " the selected temperature will increase by 2°F 30minutes after the mode is selected. The temperature will then increase byanother 2°F after an additional 30 minutes. This new temperature will bemaintained for 7 hours before it returns to the originally selectedtemperature. This ends the " Sleep " MODE and the unit will continue tooperate as originally programmed. The " Sleep" MODE program can becancelled at any time during operation by again pressing the " Sleep"button.

YOU WILLSEE:

LIGHT ON

!i.... iif

NOTE: This feature is a reminder to clean the Air Filter (See Care andCleaning) for moreefficient operation. The LED (light) will illuminateafter250 hours ofoperation. To reset aftercleaning the filter, press the"CheckFilter" button and the lightwill go off.

Air Conditioner Features(continued)

DO THIS:PRESS MODE BUTTON

SELECT HEAT

YOU WILL SEE:

NOTE: This feature can be used with any combination of FAN Speeds,Timer, or Sleep Modes, When in the Heat Mode, the fan will run continuouslywhile heat is needed, The temperature will automatically be maintainedanywhere between 60°F(15°C) and 90°F(32°C), When the room settemperatureis satisfied, the fan will cycle off and on to circulate and sample the roomair,

TO TURN UNIT OFF:

ii

YOU WILL SEE:

DO THIS:PRESS ON/

OFF BUTTON

Air Conditioner Features(continued)

ADDITIONAL THINGS YOU SHOULD KNOW

Now that you have masteredtheoperating procedure, herearemorefeaturesinyourcontrolthatyoushould becomefamiliar with.• The "Cool" circuit has anautomatic 3 minutetime delayed startif the unitis turned off and on quickly. This prevents

overheating of the compressor and possible circuit breaker tripping. The fan will continue to run during this time.• The control will maintain the settemperature within 2F,between 60 Fand 90 Fdegrees.• The control is capable of displaying temperature indegreesFahrenheitordegreesCelsius. To convert fromone to

the otherand back, press and hold the" TEMP/TiMER" Up (_)and Down (_) buttons together for 3seconds.

4-Way LouversAir directional louvers control air flowdirection. Youair conditionerhas the louver type described below.

Auger TypeThelouverswillallowyou todirecttheairflowUporDownandLeft orRightthroughouttheroomas needed. Rotate the Auger Wheel untilthe desired Left/Right direction is obtained. Pivot horizontal louversuntil the desired Up/Down direction is obtained.

Air Filter

Care and CleaningClean your air conditioner occasionally to keep it looking new. Besure to unplugthe unit beforecleaning to preventshock or firehazards:

Air Filter CleaningThe air filter should be checked at least once a month to see if

cleaning is necessary. Trapped particles in the filter can build up andcause an accumulation of frost on the cooling coils.• Grasp the filterby the centerand pull upand out.• Wash thefilter using liquid dishwashing detergent andwarm water.

Rinse filter thoroughly. Gently shake excess waterfromthefilter.Be sure filter is thoroughly dry before replacing.

• Or, instead ofwashing you may vacuum the filter clean.

Cabinet Cleaning• Be sure to unplug the air conditioner to prevent shock or fire

hazard. Thecabinetandfrontmay bedustedwith an oil-free clothor washed with aclothdampenedina solution ofwarm water andmild liquid dishwashingdetergent. Rinse thoroughlyand wipe dry.

• Never use harshcleaner, waxor polish onthe cabinet front.oBe sure to wring excess water from the cloth before wiping

around the controls. Excess water in or around the controls maycause damage to the air conditioner.

• Plug in air conditioner.

Winter StorageIf you plan to store the air conditioner during the winter, removeit carefully from the window according to the installationinstructions. Coveritwith plasticorreturn it tothe original carton.NOTE: To prevent rust or electrical connections from beingdamaged, store air conditioner in an upright positionandinadry place.

10

Avoid Service Checklist Before calling forservice, review this list. It may save you timeand expense. This listincludes common occurrences that are not the result of defective workmanship ormaterials in thisappliance

OCCURRENCE SOLUTION

Air conditionerwill notoperate. Wall plugdisconnected. Push plugfirmly into walloutlet.

Current device tripped. Preset RESET button.

House fuse blown or circuit breaker tripped. Replacefusewith time delaytype or resetcircuit breaker.

Control is OFR Turn control On andset to desired FAN orCOOL settinq.

Unit turned off and thenon too quickly. Turn unit offand wait 3minutes before restarting.

Airfromunitdoesnotfeelcold

enough.

Room temperaturebelow60°F(15°C).Coolingmaynotoccuruntilroom temperaturerises above 60°F (15°C).

Temperaturesensor touching cold coil, located behind air filter. Straighten away fromcoil.

Air conditioner cooling, butroom is toowarm- ice formingon cooling coilbehinddecorative front.

Air conditioner cooling, butroom is too warm=NOiceforming on coolingcoilbehind decorative front.

Reset to a lower temperature.

Compressor shut-off by changing modes. Wait approximately3minutes, andlistenforcompressor to restartwhen set in the COOL mode.

Outdoor temperature below 60°F(15°C). To defrost thecoil, set selector to FANposition. Then, set thermostat to warmer position.

Air filter may be dirty. Clean filter. Refer to Care and Cleaning section. To defrost, setselector to FAN ONLY mode.

Temperature is too low for night-time cooling. To defrost thecoil, settoFAN ONLYmode. Then, set temperature to a higher number.

Room too cold

Dirty air filter-air restricted. Clean airfilter. Referto Care and Cleaning section.

Temperature is too high. Set temperature to alower number.

Ventset at OPEN position. Set vent at CLOSED position for maximum cooling.

Air direction louvers positioned improperly. Position Iouversfor better airdistribution.

Front of unitis blocked bydrapes, blinds, furniture,etc.-restricts air distribution.Clearblockage in frontof unit.

Doors, windows, registers, etc, open-cold air escapes. Close doors, windows,registers, etc.

Unit recently turned on in hot room, allow additionaltimetoremove"stored heat"from walls, ceiling, floorand furniture.

Setting too low. Increase temperaturesetting.

Not in HEAT mode. Change mode.(On HEAT models only)

Air conditioner turnson andoff rapidly.

Dirty air filter-air restricted. Clean air filter.

Outside temperature extremely hot. Set FAN speed toafastersettingtobringairpast cooling coils morefrequently.

Noise when unitis cooling Air movement sound. This is normal. If tooloud, set toa slower FAN setting.

Sound of fan hitting water-moisture removalsystem. Thisisnormalwhenhumidityis high. CIosedoors windows and registers.

Window vibration- poor installation. Refer to installation instructions orcheck withinstaller.

Water dripping lNSlDE when Improper installation. Tilt air conditioner slightly to the outside to allow waterunit is cooling, drainage. Refer toinstallation instructions -check with installer.

WaterdrippingOUTSIDEwhen Unit removing large quantity of moisture from humid room. This is normal duringunit is cooling, excessively humid days.

12