HP65A PLANETARY WINCH 68580 lb
Transcript of HP65A PLANETARY WINCH 68580 lb
HP65A PLANETARY WINCH68,580 lb (31,136 kg)
www.paccarwinch.com
The BRADEN HP65 is ready to conquer the challenges of the oilfield. This compact
and powerful recovery winch delivers best-in-class line-pull and robust performance
in the toughest applications. Precise load control and ease of service make the BRADEN
HP65 the top choice for operators and fleet
owners alike.
Options
Electronic load monitor for progressive lighted display and audible overload indicator
Clutch engagement indicator provides load status without need for direct line-of-sight to winch
Piston motor with SAE “D” mounting confi guration
Features/Benefi ts
Sealed three-stage high-effi ciency planetary reduction gearing provides continuous duty performance for long pulls
Negative-draft jaw clutch ensures full engagement under load
Patented BRADEN brake valve enables smooth operation and precise load control
Ferrule anchor system facilitates rope installation and removal
Easy-to-access lubrication points allow servicing with wire rope in place
SAE J706 compliance-tested to ensure safe and secure operation
d l
eme
h o
ent under load
operation and precise load
d stch
gur
tatus
ration
Performance
Dimensions
HP65A PLANETARY WINCH68,580 lb (31,136 kg)
www.paccarwinch.com
LIT2586 R1_09-2013© 2013 PACCAR Inc ALL RIGHTS RESERVED
P.O. BOX 547 BROKEN ARROW OK U.S.A 74013 (918) 251-8511/FAX (918) 251-8511
Drum Capacity
DIMENSIONS IN INCHES (MM)
HP65A-108089/045-01
HOISTING PORTSAE –16 ORB PORT
1–5/16–12 THD
3.93(100)
3.12(79)
MOTOR DRAINSAE –4 JIC
7/16-20 THDDRAIN TO TANK
9.41(239)
13.50(343)
13.70(348)
20.00(508)
7.75(197)
19.00(483)
14.33(364)
LOWERING PORTSAE –16 ORB PORT
1–5/16–12 THD
Ø 8.00(203)
2X Ø 19.00(483)
6.00(152)
0.16(4)
OIL DRAINSAE –8 ORB
24.25(616)
14.75(375)
HAUL IN
4.00(102)
2X BRAKE ENGAGEPORT
CLUTCH ENGAGE PORT
CLUTCH DISENGAGE PORT
58.00(1473)
4.18(106)
19.50(495)
9.75(248)
29.00(737)
DRUM CENTER
RATIO 108:1 108:1
MOTOR Low: 089 (8.92 cu in.) Hi: 045 (4.460 cu in.) Low: 089 (146.2 cc) Hi: 045 (73.1 cc)
PRESSURE 2,400 psi 166 bar
FLOW 60 gpm 227.1 lpm
WIRE ROPE DIA 1.0 in. 25.4 mm
LAYER
LINE
PULL
(lb)
LINE
SPEED
(fpm)
LINE
PULL
(lb)
LINE
SPEED
(fpm)
LINE
PULL
(kg)
LINE
SPEED
(mpm)
LINE
PULL
(kg)
LINE
SPEED
(mpm)
1 68,500 28 34,250 60 31,070 9 15,535 18
2 56,040 34 28,020 74 25,420 10 12,710 23
3 47,420 40 23,710 88 21,500 12 10,755 27
4 41,100 47 20,550 101 18,640 14 9,320 31
5 36,260 53 18,130 115 16,440 16 8,220 35
WEIGHT 1,344 lb 610 kg
WIRE ROPE STORAGE, ft
LAYER 1 2 3 4 5 D/d
WIRE ROPE DIA 1.0 in. 42 94 155 226 306 9:1
WIRE ROPE STORAGE, m
WIRE ROPE DIA 25.4 mm 13 29 47 69 93 9:1
–01 DRUM
8.00(203)
20.00(508)
19.00(482.6)
DIMENSIONS IN INCHES (MM) D/d RATIO IS BASED ON PITCH DIAMETER OF WIRE ROPE AT FIRST LAYER