1 Get Complete Collection of HP0-Y36 Exam's Question and Answers. http://www.Test4Prep.com

HP EXAM HP0-Y36 Deploying HP Enterprise Networks

Type: Demo For More Information: http://www.test4prep.com/HP0-Y36.html

2 Get Complete Collection of HP0-Y36 Exam's Question and Answers. http://www.Test4Prep.com

Question: 1. A customer of an MPLS provider sends a traceroute between two of its sites. The traceroute output includes a Provider PE router but does not include any Provider P routers. Which MPLS services exhibit this behavior? (Select two.) A. Basic MPLS B. VPLSKompella C. VPLSMartini D. MPLS L2VPN E. MPLS L3VPN

Answer: AE

Question: 2. You are implementing the Link Aggregation Control Protocol (LACP) between a pair of switches. Which criteria must match for successful negotiation? (Select three.) A. switch hardware B. duplex C. media type D. link speed E. manufacturer F. Link Aggregation mode

Answer: ACE

Question: 3. An HP A5500 Switch is to be moved from a lab environment and placed in operation within the access layer of the enterprise network. The desired configuration file, switch4config.cfg, is successfully copied from an FTP server into the flash of the A5500 Switch. When the switch is rebooted, the desired configuration does not take effect. What should you do to ensure the configuration file in flash becomes the current configuration when the switch is booted? A. Delete the original configuration file. B. Indicate which configuration file to use with the bootsystem command. C. Indicate which configuration file to use with the startupconfiguration command. D. Indicate which configuration file to use with the bootloader command.

Answer: C

3 Get Complete Collection of HP0-Y36 Exam's Question and Answers. http://www.Test4Prep.com

Question: 4. Click the Exhibit button and view both exhibits.

AS 20 advertises prefix 20.0.0.0 /8, and AS 30 advertises prefix 30.0.0.0 /8. On Router2, what is the BGP Next Hop attribute for prefix 30.0.0.0 /8? A. 16.0.0.1 B. 16.0.0.3 C. 16.2.2.2 D. 16.3.3.3 E. 20.1.1.1 F. 30.1.1.1

Answer: B

4 Get Complete Collection of HP0-Y36 Exam's Question and Answers. http://www.Test4Prep.com

Question: 5. Click the Exhibit button and view both exhibits.

AS 20 advertises prefix 20.0.0.0 /8 and AS 30 advertises prefix 30.0.0.0 /8. On Router1, what is the BGP Next Hop attribute for prefix 20.0.0.0 /8? A. 16.0.0.2 B. 16.0.0.3 C. 16.2.2.2 D. 16.3.3.3 E. 20.1.1.1 F. 30.1.1.1

Answer: E

5 Get Complete Collection of HP0-Y36 Exam's Question and Answers. http://www.Test4Prep.com

Question: 6. Click the Exhibit button and view both exhibits.

AS 20 advertises prefix 20.0.0.0 /8, and AS 30 advertises prefix 30.0.0.0 /8. On Router3, what is the BGP Next Hop attribute for prefix 20.0.0.0 /8? A. 16.0.0.1 B. 16.0.0.3 C. 16.2.2.1 D. 16.3.3.1 E. 20.1.1.1 F. 30.1.1.1

Answer: E

6 Get Complete Collection of HP0-Y36 Exam's Question and Answers. http://www.Test4Prep.com

Question: 7. Click the Exhibit button.

Router1 and Router2 are BGP peers. Router2 and Router3 are BGP peers. However, Router3 has not learned the 16.0.0.0/8 BGP route. How can you resolve this issue? (Select two.) A. Enable IGP synchronization on all routers. B. Prepend AS1 to the 16.0.0.0/8 route on Router1. C. Enable BGP peering between Router1 and Router3. D. Adjust the local preference of 16.0.0.0/8 on Router1. E. Configure Router2 as a route reflector and Router1 and Router3 as clients. F. Establish a physical link between Router1 and Router3.

Answer: CE

7 Get Complete Collection of HP0-Y36 Exam's Question and Answers. http://www.Test4Prep.com

Question: 8. Which BGP attributes must be present in a BGP routing update? (Select three.) A. community B. MED C. origin type D. local preference E. AS path F. next hop

Answer: CEF

Question: 9. What can be included in BGP or multiprotocol BGP Network Layer Reachability Information (NLRI)? (Select three.) A. AS 65001 B. 10.0.0.0 /9 C. MED D. Remote LDP Session E. BGP ORF F. VPN Target G. VPLS Label Block H. 6500:301:192.168.0.0 /16

Answer: BGH

8 Get Complete Collection of HP0-Y36 Exam's Question and Answers. http://www.Test4Prep.com

Question: 10. Click the Exhibit button.

In this star topology, router HKG is the hub. Routers SIN, SGN, and KUL are spokes and are not interconnected. A multicast source at 10.1.1.1 is functioning and able to send streams to all sites except SIN subnet 10.2.1.0 /24. A review of the network reveals that SIN is able to reach the RP at HKG, loopback 0 10.1.254.1. All routers are neighbors in OSPF. Further, multicast traffic 239.0.0.240 is reaching KUL and SGN receivers, but not the receiver at 10.2.1.12. Which commands best diagnosis the problem as a multicast issue? A. [SIN] display pim routingtable [SIN] display multicast boundary [SIN] display pim bsrinfo B. [SIN] display pim routingtable [SIN] display pim interface [SIN] display pim bsrinfo C. [SIN] display pim routingtable [SIN] display multicast boundary [SIN] display pim rpinfo D. [SIN] display pim routingtable [SIN] display savedconfiguration [SIN] display pim joinprune mode sm E. [SIN] display ip routingtable [SIN] display pim interface [SIN] display pim bsrinfo

Answer: C

9 Get Complete Collection of HP0-Y36 Exam's Question and Answers. http://www.Test4Prep.com

Thank You for Trying Our Product

HP EXAM HP0-Y36 Deploying HP Enterprise Networks

Type: Demo For More Information: http://www.test4prep.com/HP0-Y36.html